Igo Primo 1.1 - HD Mini Themes and Apps

I have just tested iGO Primo™ 1.1 on HTC HD Mini
Through several forums and with the help of google I found and took :
iGO Primo™ 1.1 Update (8.5.11.168090) - Nov 17 2010
iGO Primo data.zip for 480x320
GJA 2.14 for primo 1.1 480X320
(GJA 2.14 skin is not mandatory but it is GREAT)
and then copied what I wanted from content iGO 8.3 maps, poi, voices, etc.
after I finished putting all together, I just copied Primo folder on my memory card and started NNGNAVI without that I had to install, and works well (Landscape only)

Igo primo resolution for hd mini
Hi 15MA1L.
November is that I use regularly IGO PRIMO. The relaese I feel the same.
But I would not miss it.
480x380 resolution seems to me that does not exist, but only 480x272 (what I have) as you can see in the ui_go9 data.zip. Please excuse my bad English.

15MA1L said:
I have just tested iGO Primo™ 1.1 on HTC HD Mini
Through several forums and with the help of google I found and took :
iGO Primo™ 1.1 Update (8.5.11.168090) - Nov 17 2010
iGO Primo data.zip for 480x320
GJA 2.14 for primo 1.1 480X320
(GJA 2.14 skin is not mandatory but it is GREAT)
and then copied what I wanted from content iGO 8.3 maps, poi, voices, etc.
after I finished putting all together, I just copied Primo folder on my memory card and started NNGNAVI without that I had to install, and works well (Landscape only)
Click to expand...
Click to collapse
Hello !
You have try to add RDS and TMC on your IGO ....?
(see this thread : http://forum.xda-developers.com/showpost.php?p=3741838&postcount=1)
Let me know !
I'm using TT Navigator on my Mini, but is not easy to add TMC... And the TT Navigator is not released on 320x480, it's a VGA size.. So, it work well but if IGO is designed for HVGA and if I can add TMC... I will change for him !!
King Regards, JBS68

oregon69 said:
Hi 15MA1L.
November is that I use regularly IGO PRIMO. The relaese I feel the same.
But I would not miss it.
480x380 resolution seems to me that does not exist, but only 480x272 (what I have) as you can see in the ui_go9 data.zip. Please excuse my bad English.
Click to expand...
Click to collapse
I think I understand, so I said "iGO Primo data.zip for 480x320" that must download separately and replace the original
DATA.zip I hope that this will not violate the rules of XDA

jbs68 Thanks for your suggestion. I've already tried it a few months ago and failed, I will try again
and I'll tell you the outcome

15MA1L said:
jbs68 Thanks for your suggestion. I've already tried it a few months ago and failed, I will try again
and I'll tell you the outcome
Click to expand...
Click to collapse
Ok, I'm waiting your feedback !

15MA1L said:
I have just tested iGO Primo™ 1.1 on HTC HD Mini
Through several forums and with the help of google I found and took :
iGO Primo™ 1.1 Update (8.5.11.168090) - Nov 17 2010
iGO Primo data.zip for 480x320
GJA 2.14 for primo 1.1 480X320
(GJA 2.14 skin is not mandatory but it is GREAT)
and then copied what I wanted from content iGO 8.3 maps, poi, voices, etc.
after I finished putting all together, I just copied Primo folder on my memory card and started NNGNAVI without that I had to install, and works well (Landscape only)
Click to expand...
Click to collapse
What's GJA 2.14 for primo 1.1 480X320 ..? Is just a skin..? (sorry, but I never use iGO.. I have allways TT periph! Navigator and one 920T)
This means taht iGO is skinnable ..?? Great !
Regards, JBS68

jbs68 said:
Ok, I'm waiting your feedback !
Click to expand...
Click to collapse
I have not yet tested as I ride (live)

15MA1L said:
I have not yet tested as I ride (live)
Click to expand...
Click to collapse
...mhhhh! Yes, but we can think that he work, right ..?

Hi 15MA1L
I had to change over the data.zip, including the skin (480x320 resolution). Of course I had to change the settings to the SYS. My relaese is August 2010. Now you start in full screen! I noticed a less brilliant graphics. And the system more 'slow (I set the sys colored bar to launch the deal seems more and more' memory ram). But better! I have to work a little bit above .... Thanks! Again Sorry for my bad english (Google)

Hi, this RDS TMC program looks good, but I have a problem. I think you need to have your headphones plugged to catch the RDS signal, but when is my headphones plugged, the sound of IGO is going through headphones and I’d like to sound through speaker. My IGo version is 5.5.11.168090. Does anyone have solution?

Rybba said:
Hi, this RDS TMC program looks good, but I have a problem. I think you need to have your headphones plugged to catch the RDS signal, but when is my headphones plugged, the sound of IGO is going through headphones and I’d like to sound through speaker. My IGo version is 5.5.11.168090. Does anyone have solution?
Click to expand...
Click to collapse
Hello !
I think it's better if you post your question on the original thread about the TMC receiver... here : see this thread : http://forum.xda-developers.com/show...38&postcount=1
Regards, JBS68

jbs68 said:
...mhhhh! Yes, but we can think that he work, right ..?
Click to expand...
Click to collapse
I tried many things ...
I tried to use headphones and USB cable as an antenna, in car, on the balcony...
I managed to get TMC messages using the "data tmc + gps" settings on the driver during driver test
A few times I got the channels but not the message. I'm changing the iGo Sys
but iGo gets stuck on finding the channel, or says that no TMC
... very frustrating ... I do not know what to do next. Here is the column head for me ends

15MA1L said:
I tried many things ...
I tried to use headphones and USB cable as an antenna, in car, on the balcony...
I managed to get TMC messages using the "data tmc + gps" settings on the driver during driver test
A few times I got the channels but not the message. I'm changing the iGo Sys
but iGo gets stuck on finding the channel, or says that no TMC
... very frustrating ... I do not know what to do next. Here is the column head for me ends
Click to expand...
Click to collapse
Ok, I understands, not easy !! I should be installed as fast as possible and I would carry out also the tests. Leave me time to install the soft !!
Maybe we can ask in the original thread if he have any solution for your problem ..?
Regards, JBS68
===== Edit =====
Ok, you have try this http://forum.xda-developers.com/showpost.php?p=6631652&postcount=2024
or this http://forum.xda-developers.com/showpost.php?p=6702941&postcount=2033
Hope that help you !....

Hi to All
after many many forum I install my IGO PRIMO on my mini and it works perfectly with all maps, all autovelox, all POI...
I adjust the resolution for our phone...
If You tell me how can I upload the file somewhere I can give You all the Programs ready to be put and works in Your memory cards.
Ricky

Maybe rapidshare, uploading.com is an option?

ok,
I try....
but I have to register me to the site?
If You have already an account in pvt message could You send me Your data in order to avoid another registration to another site...
thanks
I will upload all the complete program ( You will have only to copy it in Your memory card ) with all maps!
Thanks
Ricky

jbs68 said:
Ok, I understands, not easy !! I should be installed as fast as possible and I would carry out also the tests. Leave me time to install the soft !!
Maybe we can ask in the original thread if he have any solution for your problem ..?
Regards, JBS68
===== Edit =====
Ok, you have try this http://forum.xda-developers.com/showpost.php?p=6631652&postcount=2024
or this http://forum.xda-developers.com/showpost.php?p=6702941&postcount=2033
Hope that help you !....
Click to expand...
Click to collapse
I'm sorry but nothing new seems promising but in fact it is mission impossible.
"Maybe we can ask in the original thread if he have any solution for your problem ..?"
The more I read the less I wanted there to write anything,
because others make a specific issue of compatibility with the HTC HD Mini-and still no response and that speaks for itself

Hi Guys...
after many many forum, and many many day and night, I'm uploading on Megaupload my IGO PRIMO 8.5.11.168090 perfectly functioning with all maps!!!
You have only unzip and copy the folder in Your sd and with ( for ex ) ShortCutCreator, create an icon in Your start menu or where You want...
tell me If you are satisfy!!
Ricky
it will be in italian language and with my settings but You can change everything!
it will be 1.63gb...but there are all the maps!...when You download it You can choose only the map You need...the other ones You can keep...maybe in the future 1 of this will be usefull!!!

ok!!!
go there!!

Related

[31.07.2009] TMC now working without external Hardware!!!

Hi,
Tmc work on Touch HD with a little tool (attached here).
TMC developers thread: http://forum.xda-developers.com/showthread.php?t=497977
beemers TMC thread: http://forum.xda-developers.com/showthread.php?t=512630
Load and install the two attached cab files, then:
start HyperGPS
select a free Com Port for TMC
go to menu > Test and search TMC with the arrows
message RTTMC in receive windows means TMC available (Pic 4)
if TMC found, close test windows with OK
leave HyperGPS in the background and start iGO
go to settings > TMC
search a TMC broadcaster
What is new in Beta 8:
-Full GNS protocol support. Tested under iGO and Navigon
GNS needs TMC+GPS option to be selected althought if it is not, HyperGPS will send fake GPS sentences.
-Less CPU consumption and lower memory footprint
-Optimized test program: Now RSSI is correctly shown under Royaltek mode, unused buttons are hidden under GNS mode and all the behaviour has been polished.
-RDS and TMC indicator in test program.
-Log mode redesigned to make more useful and readable logs.
-Removed fake RDS message under Royaltek mode. Not necessary with correct timmings.
-Soved an issue with block ratio not always sent.
my iGO settings in system.ini:
[tmc]
saved_config_available="0"
saved_config_classname="NMEA_GPSTMC_ROYALTEK"
saved_config_portname="COM"
saved_config_port="9"
saved_last_tuning_mode="0"
auto_tuning="0"
saved_last_frequency="1047"
YouTube - TMC and iGO
Special thanks to beemerTPPC and all TMC developers.
with friendly greet
starbase64
You guys are incredible, and xda-dev is an amazing forum!!!!!!!
When, even iGO responsibles of the support section strictly answer that the HD isn't able to provide a TMC function with its radio receiver, you still believe that it's possible, give yourselves the means to make it happen, and success!!!!
BRAVO!!!
...'ll test this soon
it doesnt work on my hd....
tested all the com ports but no way.... it says it cannot open com port....
I have installed both the files, any help ???
Mau
TMC found in iGo, but no TMC-stations can be found in Sweden so far...
Does this work in the UK with iGO8? Reason why i ask that TMC is found in iGO8 but no TMC stations found. I have the headset plugged in and it's scanned all FM radio frequencies (testing.... no TMC signal found). The funny thing is, on the main screen where the TMC icon is, i have a yellow envelope. Clicking the car icon, then the car icon in a triangle, it takes me to a section called "Traffic Alerts" where 2 events are listed for roadworks. (1. A3211 westminster bridge - tower bridge & 2. A23 thorton - heath purley). So it must have picked up a signal at some point. Any help please ?
starbase64,
thanks a lot. I just follow in last two weeks all efforts (thanks to flywhc and other team) to obtain TMC function avalaible on htc devices. In my case I have a touch HD. Now I just installed u sw, and config and TMC signal is OK. Now remain only to test on the road...
Thanks again. I hope to give u feedback asap.
It worked once and then it broke.
It says it cant load the driver so i uninstalled,re installed beemercert.cab and then tried to reinstall the app but now it say it can't as it doesn't have permission.
WOW! This is so good. HTC dvices always have hidden options. The only bad thing is missing tmc services in my coutry, macedonia
Griff1 said:
It worked once and then it broke.
It says it cant load the driver so i uninstalled,re installed beemercert.cab and then tried to reinstall the app but now it say it can't as it doesn't have permission.
Click to expand...
Click to collapse
Same problem here, worked once, and then after softreset cannot open com port anymore.
I know,gutted or what.
I'm just pondering a hard reset,would rather not but i really want this working.
EDIT: I might wait a while till my next Dutty rom,will probably be soon,lol.
Griff1 said:
It worked once and then it broke.
It says it cant load the driver so i uninstalled,re installed beemercert.cab and then tried to reinstall the app but now it say it can't as it doesn't have permission.
Click to expand...
Click to collapse
same here aswell using dutty`s v3.3XT
Gotta be realistic, while its nice to have, this is "only" OpenTMC, in Germany known to be around 20-40 minutes behind real traffic situation. This is not TMCPro with realtime traffic data through road sensors.
But indeed it is fantastic for the masterminds behind this activation to have achieved this. Respect.
OpenTMC around the world: http://en.wikipedia.org/wiki/Traffic_Message_Channel#TMC_services_in_operation
stokesie said:
same here aswell using dutty`s v3.3XT
Click to expand...
Click to collapse
Same here, using dutty's 3.3. I downloaded the setup files from here http://forum.xda-developers.com/showthread.php?p=3730090#post3730090 (page 35) and reinstalled and all working again.
Also, anyone know what frequency UK TMC is broadcast on?
works on htc diamond?
Originally Posted by Griff1 View Post:
It worked once and then it broke.
It says it cant load the driver so i uninstalled,re installed beemercert.cab and then tried to reinstall the app but now it say it can't as it doesn't have permission"
Same problem here, worked once, and then after softreset cannot open com port anymore.
IO ME MEDESIMO said:
works on htc diamond?
Click to expand...
Click to collapse
Yes, it does.
works nice with my blackstone and tmc is found here in NRW.
but
after close/restart it still works due to the driver is still loaded but as soon as its beeing unloaded for the first time I get the same error that driver cannot be loaded again - check COM port or install certs. even after softreset and reinstalling certs it doesnt work until i replace gfmapi.dll in \windows
usrname said:
it doesnt work until i replace gfmapi.dll in \windows
Click to expand...
Click to collapse
Thats what i'm finding too.
Does it work in netherlands
Have you read the messages in this thread? Hint: Post 12

TomTom - What Version??

Hi..
I have tried to find the answer here at XDA, but i'm still confused...
Which TomTom version is the right one for the Black Stone??
Is the VGA or the QVGA for the Black Stone??
"Huhh, there are noe stupid questions, only stupid answers" ;-)
Stupid Answer: try looking at the 'TomTom on HD' topic on here
Thnx, but i have checked out that post. And i have figured out that the VGA-version should run on the HD.... BUT, when i installed it, the HD nagged about some Low Memory issue.... Therefore this stupid question....
QuaQuaRaQuaQua said:
Thnx, but i have checked out that post. And i have figured out that the VGA-version should run on the HD.... BUT, when i installed it, the HD nagged about some Low Memory issue.... Therefore this stupid question....
Click to expand...
Click to collapse
I have installed ttn7.915.9196.vga_black it's work fine, i have only some issue on some size of icon of poi
Thnx Carl... That version works very nice
I tried to install some "TT Nav 7.450.9..." version... Not good...
QuaQuaRaQuaQua said:
Thnx Carl... That version works very nice
I tried to install some "TT Nav 7.450.9..." version... Not good...
Click to expand...
Click to collapse
That's odd, because I use tomtom v. 7.450 (9028) and works fine. But personally, forget silly tomtom and try IGO8. Believe me, you'll see the BIG difference.
IGO8 was born for blackstone, except of the sys.txt, but this is only small inconvenience from the beginning .
I have nstalled version TT_Nav_7.450.9028_repack3-qvga-black, previously working on Kaiser. On blackstone working fine
dawpuc said:
I have nstalled version TT_Nav_7.450.9028_repack3-qvga-black, previously working on Kaiser. On blackstone working fine
Click to expand...
Click to collapse
Hi do you mind to post the link?
IGO version
krajta said:
IGO8 was born for blackstone, except of the sys.txt, but this is only small inconvenience from the beginning .
Click to expand...
Click to collapse
! Solved problem !
Hi
What version would work?
I tried IGO_8_v8.3.2.79297.
I was able to select lanq. and voices, but IGO stopped when trying to load the usual "Warning bla bla" (you know this warning any GPS need to show you the first time you use it).
Tried to reboot a few times. Same just made my HD veeeeeery slow so I had to restore it!
Do I need to do something with the sys.txt?
Mittaa
Tt 7.450.9028
7.450.9028 works perfectly (just with small fonts and POI icons).
I still have the issue of GPS dropping signal, but this is seems to be not related to the application used
I am using 7.918.9193 QVGA.cab with map UK v845.2667 on my HD and it runs VERY fast (make sure you are not showing too many POI's you dont need). I have not modified any settings or files for it to work and it displays perfectly and runs fine.
I have it installed to the mem card and I have never had any troubles about low memory.
As for IGo, I am using 8.3.2.97313 and its fast and beautiful, with alot more features than TomTom but I only really use it for the tracking feature and to re trace your tracked route. I used it (well it was MioMap then) to go from one side of Bulgeria to the other via taxi (with tracker on) and then hired a car for the trip back and re traced the route.
The sys.txt was a nightmare to get working but after lots of playing (refused to read people instructions, silly me) I got it working at full RES.
Both amazing but I still use TomTom more

Nav n Go - iGO 8

Hello there,
Which version of iGO8 works for the Rhodium?
I've tried various releases and still had not been able to make it work!
Thanks in advance
Yuval lavie
Yuuvi said:
Hello there,
Which version of iGO8 works for the Rhodium?
I've tried various releases and still had not been able to make it work!
Thanks in advance
Yuval lavie
Click to expand...
Click to collapse
Look in many of the threads already here. In general, you can say that all the official PDA releases work. These are 8.3.2.64029, 87762 and 97313. (Maybe more). With these versions a very basic sys.txt (as supplied with these versions) will work, as long as you add:
[device]
sdcard_dsk_num=7
(It took me three days to find this out...)
andrehj said:
Look in many of the threads already here. In general, you can say that all the official PDA releases work. These are 8.3.2.64029, 87762 and 97313. (Maybe more). With these versions a very basic sys.txt (as supplied with these versions) will work, as long as you add:
[device]
sdcard_dsk_num=7
(It took me three days to find this out...)
Click to expand...
Click to collapse
I had problems getting mine to work also. All I did was a fresh install, nothing edited in sys.exe, but I replaced data.zip with a newer version and it seems to be working fine!
I am ruining 8.3.2.93122 and it runs just fine.
Just to confirm it runs ok with version 8.3.2.1972 on the TP2 with these settings in sys.txt
[interface]
show_exit=1
[rawdisplay]
screen_x=480
screen_y=800
class="portrait"
[device]
sdcard_dsk_num=7
[folders]
App="Storage card/iGo8"
Click to expand...
Click to collapse
andrehj said:
[device]
sdcard_dsk_num=7
Click to expand...
Click to collapse
In fact, what does it mean ?
I guess it's giving iGO the correct location of the sdcard i.e. disk number 7.
(I'm also guessing) The other 6 disks will be internal storage/ROM/backup ROM/etc.
ok, but it´s strange as App looks for "Storage card"
Code:
[folders]
App="[i]Storage card[/i]/iGo8"
... it´s just to understand ...
Whatever I install, I keep getting "Initialization error: no language files were found"
any help ?
do you have insert(copied) a Lang_YourLanguage.zip
you will find this on
-iGO
-CONTENT
-LANG
greetz
Aight, so I fixed all these problems and the program works great with all maps etc.
but it doesnt know how to determine where I am..
I'm telling it to take me to some place, and it creates a way like I'm in Jerusalem, while im not there xD...
IGO8 dont find my internal GPS???
Hi,
the programm and the maps work fine on my TP2 but he always shows me:
no GPSdriver found!
Igo dont find my internal GPS, any ideas???
thx
look in the settings
Port 4
Baudrate 57600
Change in the registry
HKLM\System\CurrentControlSet\
GPS IntermediateDriver\Drivers\GPSOneDevice\
PollInterval = 100
and delete these (GPSLogFile.txt+
GPSLogFileBack.txt) files you will find in the \Windows\ folder
take a softreset, then run QuickGPS or if you have time
without QuickGPS...
greetz
hm...ty for the tip...
but nothing change!
igo shows me after autoscan:"no gps driver found"
on Google Maps it works fine with the internal GPS
Schnalle said:
Hi,
the programm and the maps work fine on my TP2 but he always shows me:
no GPSdriver found!
Igo dont find my internal GPS, any ideas???
thx
Click to expand...
Click to collapse
Schnalla,
What regional settings are you using?
For me strangly enough I found that when my local are set to anyting other then English iGo doesn't find the GPS receiver.
So try changing local to English UK or the like (might need a restart).
Then go to iGo GPS settings and run the automatic scan for GPS device.
It worked for me.
Once the GPS receiver is found you can change the Regional settings back to whatever you had before.
IGO8 Problem
Dear all,
I've got a IGO8 problem too. I've got the same version as up here. (The last version with a working TTS)
When i've touch flo 3d turned off (and using the basic windows mobile start screen) is IGO8 working perfect.
After turning on the touch flo 3d is igo working for a short time, but after an hour, when I try to start the application ==> I will get a error. I will get this message 1/2 second after pressing the igo icon and before I can see the loading screen.
the error is: "Failed to reserve virtual address space"
Can anybody help me to let it working with touch flo 3d? Or can somebody explain what the problem is?
Thanks in advance!
Ranney
ranney said:
Dear all,
I've got a IGO8 problem too. I've got the same version as up here. (The last version with a working TTS)
When i've touch flo 3d turned off (and using the basic windows mobile start screen) is IGO8 working perfect.
After turning on the touch flo 3d is igo working for a short time, but after an hour, when I try to start the application ==> I will get a error. I will get this message 1/2 second after pressing the igo icon and before I can see the loading screen.
the error is: "Failed to reserve virtual address space"
Can anybody help me to let it working with touch flo 3d? Or can somebody explain what the problem is?
Thanks in advance!
Ranney
Click to expand...
Click to collapse
I've found some information here: http://forum.xda-developers.com/showthread.php?t=526679&highlight=igo8
But is there an another solution to get it working without resetting the device or disable the TF 3D?
It must have a (Simple?) reason becouse it will work after a reset but not anymore after some time...
Thanks in advance!
Ranney
i am using the same sd card from my tp1 (nothing changed). igo 8.3 is working perfectly.
ranney said:
Dear all,
I've got a IGO8 problem too. I've got the same version as up here. (The last version with a working TTS)
When i've touch flo 3d turned off (and using the basic windows mobile start screen) is IGO8 working perfect.
After turning on the touch flo 3d is igo working for a short time, but after an hour, when I try to start the application ==> I will get a error. I will get this message 1/2 second after pressing the igo icon and before I can see the loading screen.
the error is: "Failed to reserve virtual address space"
Can anybody help me to let it working with touch flo 3d? Or can somebody explain what the problem is?
Thanks in advance!
Ranney
Click to expand...
Click to collapse
hi ranney
with which version tts is working on your tp2?
greez
emanuel
emanuel-paul said:
hi ranney
with which version tts is working on your tp2?
greez
emanuel
Click to expand...
Click to collapse
Hi emanuel,
I've got version 8.3.2.93112. But also problems with TTS now. When I set the voice in IGO to a basic version (non TTS), close igo, reboot, start igo and set it to a TTS ==> it's working. but after shutting it down and restarting ==> TTS is not longer working. (And after a day, IGO cannot be started anymore and the device had to soft reset to let IGO run again...
Ranney

Igo rescale

http://forum.xda-developers.com/showthread.php?t=825875
Could this be modified to make Igo use the full screen on the Galaxy?
No, you can't unfotunately. On winmo devices you had to modify the data.zip or data.gro, but it doesn't work on Android version. But there is a way to do it. Nav' N Go released a new data.gro that solves the problem. I've tryed it and worked great on mine. Unfortunatelly it's illegal to distribute it but a little bit of googleing or gpsunderground.com could help you.
Hope I was clear enough, and helpfull enough.
keno_ro said:
http://forum.xda-developers.com/showthread.php?t=825875
Could this be modified to make Igo use the full screen on the Galaxy?
Click to expand...
Click to collapse
If you want iGO on Galaxy S send me a pm, and ai give you download links....
I also have some links for Igo but I just tried the new Sygic Aura and is awesome!

[Q] Navigation doesn't work on my device, please help.

Hello,
I'm a proud owner of the HTC HD Mini and its a great device but I brought it to use it as a navigation system, I've tried several navigation softwares but none of them seems to work. (Navigon, Tom Tom, Route66, CoPilot etc.)
It installs correctly but when I try to run the application it keeps loading and freezes after some time.
Does anyone know how to fix this problem?
Thanks.
hi, i use Igo Primo and runs like a charm on hd mini (landscape only though ,for portrait it works Igo My way but primo looks better) you may find it using search function here or on Google ,you will find alot of updated maps too unlike some other softwers
here's a close link http://forum.xda-developers.com/showthread.php?t=690448
use Sygic Mobile Maps 10
http://www.sygic.com/index.php/en/compatible-devices.html
Both of them ain't working for me, anyone else?
Try TomTom and use ttn7.917.9186_qvga_black_cuckoo_NOBT, works perfect. At the moment i use the new maps 865.
sygic works great for me dude...try to format ur device...i can upload if u want...
If you are fresh owner of the Mini i more then strongly recommend u to return it back to the seller w/o declaring any reason (works usualy within few days from buy date) .. the most important part is DONT TAKE ANOTHER ONE IN EXCHANGE take the money, since Mini is **** phone even with Navigation ... its a junk phone no matter what, trust me i unfortunately own one too.
Good luck
Can anyone help me please?
navigation
Hello bertobasten,
I use HD MINI - TOMTOM VERSION 7915 MAP 8520_2820 ITA, and IGO PRIMO 8.5.11.168090 - November 17, 2010 - resolution 480x320 - if you put the appropriate files and not part igo primo, the problem is that you attach the file sys.txt
see also: http://forum.xda-developers.com/showthread.php?t=946704.
I hope it was helpful.

Categories

Resources