TomTom - What Version?? - Touch HD Themes and Apps

Hi..
I have tried to find the answer here at XDA, but i'm still confused...
Which TomTom version is the right one for the Black Stone??
Is the VGA or the QVGA for the Black Stone??
"Huhh, there are noe stupid questions, only stupid answers" ;-)

Stupid Answer: try looking at the 'TomTom on HD' topic on here

Thnx, but i have checked out that post. And i have figured out that the VGA-version should run on the HD.... BUT, when i installed it, the HD nagged about some Low Memory issue.... Therefore this stupid question....

QuaQuaRaQuaQua said:
Thnx, but i have checked out that post. And i have figured out that the VGA-version should run on the HD.... BUT, when i installed it, the HD nagged about some Low Memory issue.... Therefore this stupid question....
Click to expand...
Click to collapse
I have installed ttn7.915.9196.vga_black it's work fine, i have only some issue on some size of icon of poi

Thnx Carl... That version works very nice
I tried to install some "TT Nav 7.450.9..." version... Not good...

QuaQuaRaQuaQua said:
Thnx Carl... That version works very nice
I tried to install some "TT Nav 7.450.9..." version... Not good...
Click to expand...
Click to collapse
That's odd, because I use tomtom v. 7.450 (9028) and works fine. But personally, forget silly tomtom and try IGO8. Believe me, you'll see the BIG difference.

IGO8 was born for blackstone, except of the sys.txt, but this is only small inconvenience from the beginning .

I have nstalled version TT_Nav_7.450.9028_repack3-qvga-black, previously working on Kaiser. On blackstone working fine

dawpuc said:
I have nstalled version TT_Nav_7.450.9028_repack3-qvga-black, previously working on Kaiser. On blackstone working fine
Click to expand...
Click to collapse
Hi do you mind to post the link?

IGO version
krajta said:
IGO8 was born for blackstone, except of the sys.txt, but this is only small inconvenience from the beginning .
Click to expand...
Click to collapse
! Solved problem !
Hi
What version would work?
I tried IGO_8_v8.3.2.79297.
I was able to select lanq. and voices, but IGO stopped when trying to load the usual "Warning bla bla" (you know this warning any GPS need to show you the first time you use it).
Tried to reboot a few times. Same just made my HD veeeeeery slow so I had to restore it!
Do I need to do something with the sys.txt?
Mittaa

Tt 7.450.9028
7.450.9028 works perfectly (just with small fonts and POI icons).
I still have the issue of GPS dropping signal, but this is seems to be not related to the application used

I am using 7.918.9193 QVGA.cab with map UK v845.2667 on my HD and it runs VERY fast (make sure you are not showing too many POI's you dont need). I have not modified any settings or files for it to work and it displays perfectly and runs fine.
I have it installed to the mem card and I have never had any troubles about low memory.
As for IGo, I am using 8.3.2.97313 and its fast and beautiful, with alot more features than TomTom but I only really use it for the tracking feature and to re trace your tracked route. I used it (well it was MioMap then) to go from one side of Bulgeria to the other via taxi (with tracker on) and then hired a car for the trip back and re traced the route.
The sys.txt was a nightmare to get working but after lots of playing (refused to read people instructions, silly me) I got it working at full RES.
Both amazing but I still use TomTom more

Related

official htc 3.54 ger rom problems

hy all. after using this rom for a month now i ran into several probs.
1) when i lock my tytn, and someone calls me, i cant answer the call, then i cant unlock the phone because the unlock in the lower left corner is replaced by the lost call notification. the first half of the month i have this problem not very often, but now i have it on every call. so i loose every call, the SR, then unlock, then call back. (really cool this problem)
2) bluetooth worked fine, but now i cant enable it without doing a SR before enabling it.
3) omg, it is so slow after a month of use! i SR nearly every day, i delete temps with cleartemp, but its so slow now. for example, when i write a new message, and then switch to landscape, i think i have to wait about 20-30 secs, before its rendered. and the same after sending sms and switching back to portrait home screen.
4) sometimes it looks like everything is ok, but when i try to tab something a realise, that my tytn is completly dead. (i have bought a second mobile phone and use it, when the tytn is dead. and what i want to say o this bug: nice piece of software ms! i feel like an alpha tester for ms! but i had to pay for it. )
all these bugs appeared after a few weeks!
installed software:
pocketrar (newest)
htc task manager 1.51
htc music plugin 1.0
adobe reader 2
cleartemp (newest)
emil andersson pocket sudoku
i hope some ms devs read this thread, think about it and learn something for the future.
regards chief
Why not giving one of mine a try (look in my signature)??
Most that use them are excited of the speed
Olioaglio
Chiefcooker said:
... i hope some ms devs read this thread, think about it and learn something for the future.
regards chief
Click to expand...
Click to collapse
I am running the same T-Mobile Germany ROM and have no such issues! It looks to me like your device is running out of memory! How much memory is still available on your device? Where did you install your apps - phone or card?
Try to run your device without the TASK MANAGER for a while, maybe that is what is eating your memory ...
Junner2003 said:
I am running the same T-Mobile Germany ROM and have no such issues! It looks to me like your device is running out of memory! How much memory is still available on your device? Where did you install your apps - phone or card?
Try to run your device without the TASK MANAGER for a while, maybe that is what is eating your memory ...
Click to expand...
Click to collapse
hi, i have installed the apps in unlocked extrom.
and i dont have the tmobile version, i have the original htc german version.
Olioaglio said:
Why not giving one of mine a try (look in my signature)??
Most that use them are excited of the speed
Olioaglio
Click to expand...
Click to collapse
i have used schaps 3.54 ger rom a long time, and i had many probs with bluetooth too with this rom, and your rom is based on it, but i think i'll try the superstoragerom. looks really good. gut gemacht! der inhalt von pro home sieht ja cool aus.
mfg chief

[PATCH] WVGA - FIX for Navigon Mobile Navigator MN7 v 7.3.2 (Workaround)

Hi,
it seems like Navigon tried to implement WVGA resulution in their latest version of Mobile Navigator MN 7 v7.3.2 ... however, unsuccessful :-(
To make it work, unzip the attached "BinaryConfig.XML" and replace it on the device in the "\navigon\" directory... other files don't need to be replaced any more.
This fix applies only to v7.3.2!
regards jan
EDIT: I've replaced the first file by 3 others... the first is identical to the original posted here earlier, the others "stretch" mn7 to a mixture between vga and wvga, and to fullscreen wvga. Backgound (in German language can be found here)
to sum that up:
-people who like the version without stretching take the first file,
-people who like higher use of the screen and still want the full functionality (in landscape mode) take the 2nd file,
-people who like full-screen with restrictions to functionality (in landscape mode some software-internal scroll arrows can not be accessed) take the third file
regards jan
Indeed. The 7.3.2 did not launch and I had to soft reset my Touch HD.
Thanks for your files !
Do you know what are the changes brought by 7.3.2, otherwise than the WVGA resolution failed attempt ?
Does not work good.
But good Try.
Cool
Working perfect for me
Thanks a lot
where find 7.3.2 ?
thank you
taz22 said:
where find 7.3.2 ?
thank you
Click to expand...
Click to collapse
All updates (maps, software, ...) are done via Navigon Fresh.
thank you
very much
i m stupid
dodo34 said:
Does not work good.
But good Try.
Click to expand...
Click to collapse
what exactly do you mean?
Probably he means that - at least for 480x800 - not better than what was given at
http://forum.xda-developers.com/showthread.php?t=446487&page=15 post # 148
but anyway thanks for other resolutions.
Hallo,
how did you get the Touch HD running on 7.3.2?
I also run this config, but my Touch HD don`t recognize the internal GPS. What will I have to do that the MobileNavigator will find GPS???
Hello!
I´ve got the problem, when i want to start the MN7.3.2 in landscape mode, the mn7 goes for approx. 5seconds to horizontal mode, but starts in landscape. Then it rotates to landscape, but the mn7 is cut to the left half.
Has anybody an idea?
I use MaryOne ROM from HelloNasty, so it rotates for itself.
raz0r09 said:
Hallo,
how did you get the Touch HD running on 7.3.2?
I also run this config, but my Touch HD don`t recognize the internal GPS. What will I have to do that the MobileNavigator will find GPS???
Click to expand...
Click to collapse
if you haven't changed any gps settings on the hd itself and if you don't use any port splitter like serilot or glopus, it should work with the following manual gps settings in navigon setup:
GPS Type: Internal GPS only
GPS-Port: Com4: ActiveDevice
GPS Baudrate: 4800
TMC: None
at least that works for me...
good luck
regards jan
NoRescue said:
Hello!
I´ve got the problem, when i want to start the MN7.3.2 in landscape mode, the mn7 goes for approx. 5seconds to horizontal mode, but starts in landscape. Then it rotates to landscape, but the mn7 is cut to the left half.
Has anybody an idea?
I use MaryOne ROM from HelloNasty, so it rotates for itself.
Click to expand...
Click to collapse
You have to make sure that the screen is in landscape mode (which means not only hold the device in landscape, but have an open window (i.e. file explorer) which actually is displayed in landscape) BEFORE you start MN7, and it should stay like that all the time. MN7 gets "confused" when you change screen orientation during operation. maybe you should exclude it from your g-sensor app.
hope that helps...
regards jan
Update to MN7.3.2
I Have problems updating to 7.3.2.
Have copied the Software (7.3.1) to the HD in HDD-Mode and installed everything. Then Installed NavigonFresh on my PC and plugd in my HD in HDD-Mode. When I hit Update Navigon-Sofware I get the massage: "Ungültige Gerätedefinition" (=>Invalid Devicedefinition)
What am I doing wrong? Created an Account and everything. Do I Have to buy MN to Update?
MN7
What did I do wrong - Icopied the binaryconfig file as you said but when I launch MN7 still no display. Can you help?
HD switching off
Hi all,
Since I have installed navigon MN7, my HD does not switch off automatically anymore.. That's very bad for the battery. Any idea how to solve this problem?
Thanks !
See http://forum.xda-developers.com/showthread.php?t=446487&page=43 (hope this becomes a link), post #423. The hard reset may not be necessary; I did it because I wanted to clean the device of any unexpected effects which I was afraid would have been created by MN7 using the "wrong" xmls. Sorry I tried both on my PC (the installation program) and on my HTC HD (my trail version) but coud not find a menu option saying which version of MN7 I have!
Thank you hausen, it works perfectly on my Diamond2!
Hi all,
today i've bought a Navigon Mobile 7 for my HTC HD2, installed, updated via Freshstuff and till this morning my NM7 wouldnt start at all...i modified it with the files provided here (.xml) tried with soft and hard reset, uninstalled Copilot Live 8 (thought was a kind of conflict). The manual say:
- use 2 gb sd micro card to install the software..i've used 4 gb and 8gb...maybe is mandatory???
the program start and remain freezed fro few second (without any welcome screen, just the pda freezed...) then i checked in the task manager and i saw was in run using 2.49 mb of resources and i had to stop it few time...
now...any solution about? or i have to be again a bad guy and stop to buy software but just have to keep download cracked software?
Thank you all for the answers,
S. aka Dr. Dobermann...ANGRY...really ANGRY!
thanks
hausen said:
Hi,
it seems like Navigon tried to implement WVGA resulution in their latest version of Mobile Navigator MN 7 v7.3.2 ... however, unsuccessful :-(
To make it work, unzip the attached "BinaryConfig.XML" and replace it on the device in the "\navigon\" directory... other files don't need to be replaced any more.
This fix applies only to v7.3.2!
regards jan
EDIT: I've replaced the first file by 3 others... the first is identical to the original posted here earlier, the others "stretch" mn7 to a mixture between vga and wvga, and to fullscreen wvga. Backgound (in German language can be found here)
to sum that up:
-people who like the version without stretching take the first file,
-people who like higher use of the screen and still want the full functionality (in landscape mode) take the 2nd file,
-people who like full-screen with restrictions to functionality (in landscape mode some software-internal scroll arrows can not be accessed) take the third file
regards jan
Click to expand...
Click to collapse
might actually work

GPS/SatNav recommendations -which one?

I got TomTom bundled with the Athena and Cruise, no such luck with the TP2. Any suggestions or recommendations about which package to go for for TP2, bearing in mind the wide screen etc.
All suggestions welcome
i have tried 3 sat navs over the years. obvious one is tomtom, i use copilot 7 and have no probs. i have read and heard great reports of mcguider? might want to check the spelling. very popular is garmin xt but word of warning.... youll have to hot swap your sd card and that is no fun. workarounds available but not worth messing around with it.
i went for copilot live 7 because i found a cheap one on ebay and no need to hot swap. its very clear and works with most devices.
I think that should be a good short list. no doubt others will champion other brands.
I use TomTom, have no problems with it at all, works 100%
Presumably using VGA version rather than QVGA?
jaso2005 said:
Presumably using VGA version rather than QVGA?
Click to expand...
Click to collapse
Yes indeed, but it's the 480 X 800 screen that might present an issue
I use tomtom7, but for some reason on my kaiser and rhodium it runs SO SLOWLY.
I only get about 0.75 frames per second update time, which frankly is terrible compared to the 3-5fps that you would see on a standalone tomtom unit.
dazultra2000 said:
I use tomtom7, but for some reason on my kaiser and rhodium it runs SO SLOWLY.
I only get about 0.75 frames per second update time, which frankly is terrible compared to the 3-5fps that you would see on a standalone tomtom unit.
Click to expand...
Click to collapse
I use 7.915, the latest version which runs flawlessly.
As mentioned ... I have CPL6 and it works fine on the TP2 taking up the whole of the WVGA screen except the initial splash and performs well.
Paul.
igo8 (latest version) works on mine just fine. Same version I was using on the HD
iGo 8
I cant get iGo 8 to work to save my life!, I've installed and re-installed countless times now and Iget the same issue, it installs fine but wont start the application, even to give me the license agreement page.
it just bombs out and it's really cramping my phone at the moment... any ideas?
Turn off A-GPS
terryd1980 said:
I cant get iGo 8 to work to save my life!, I've installed and re-installed countless times now and Iget the same issue, it installs fine but wont start the application, even to give me the license agreement page.
it just bombs out and it's really cramping my phone at the moment... any ideas?
Click to expand...
Click to collapse
Hi
I couldn't get IGo8 to run with A-GPS enabled. It still works fine.
Cheers
andrew-in-woking
A-GPS
Hi there,
I might be really stupid but where in the settings is the option to switch off Assisted GPS?
I'm surprised that it doesnt work with A-GPS as the Kaiser had no issues at all.
Thanks for your help
A-GPS settings
terryd1980 said:
Hi there,
I might be really stupid but where in the settings is the option to switch off Assisted GPS?
I'm surprised that it doesnt work with A-GPS as the Kaiser had no issues at all.
Thanks for your help
Click to expand...
Click to collapse
Start>Settings>System>Location Settings
Cheers
andrew-in-woking
iGO8
Hi all
I have the latest version of iGO8 working perfectly on my TP2.
Cheers
andrew-in-woking

Nav n Go - iGO 8

Hello there,
Which version of iGO8 works for the Rhodium?
I've tried various releases and still had not been able to make it work!
Thanks in advance
Yuval lavie
Yuuvi said:
Hello there,
Which version of iGO8 works for the Rhodium?
I've tried various releases and still had not been able to make it work!
Thanks in advance
Yuval lavie
Click to expand...
Click to collapse
Look in many of the threads already here. In general, you can say that all the official PDA releases work. These are 8.3.2.64029, 87762 and 97313. (Maybe more). With these versions a very basic sys.txt (as supplied with these versions) will work, as long as you add:
[device]
sdcard_dsk_num=7
(It took me three days to find this out...)
andrehj said:
Look in many of the threads already here. In general, you can say that all the official PDA releases work. These are 8.3.2.64029, 87762 and 97313. (Maybe more). With these versions a very basic sys.txt (as supplied with these versions) will work, as long as you add:
[device]
sdcard_dsk_num=7
(It took me three days to find this out...)
Click to expand...
Click to collapse
I had problems getting mine to work also. All I did was a fresh install, nothing edited in sys.exe, but I replaced data.zip with a newer version and it seems to be working fine!
I am ruining 8.3.2.93122 and it runs just fine.
Just to confirm it runs ok with version 8.3.2.1972 on the TP2 with these settings in sys.txt
[interface]
show_exit=1
[rawdisplay]
screen_x=480
screen_y=800
class="portrait"
[device]
sdcard_dsk_num=7
[folders]
App="Storage card/iGo8"
Click to expand...
Click to collapse
andrehj said:
[device]
sdcard_dsk_num=7
Click to expand...
Click to collapse
In fact, what does it mean ?
I guess it's giving iGO the correct location of the sdcard i.e. disk number 7.
(I'm also guessing) The other 6 disks will be internal storage/ROM/backup ROM/etc.
ok, but it´s strange as App looks for "Storage card"
Code:
[folders]
App="[i]Storage card[/i]/iGo8"
... it´s just to understand ...
Whatever I install, I keep getting "Initialization error: no language files were found"
any help ?
do you have insert(copied) a Lang_YourLanguage.zip
you will find this on
-iGO
-CONTENT
-LANG
greetz
Aight, so I fixed all these problems and the program works great with all maps etc.
but it doesnt know how to determine where I am..
I'm telling it to take me to some place, and it creates a way like I'm in Jerusalem, while im not there xD...
IGO8 dont find my internal GPS???
Hi,
the programm and the maps work fine on my TP2 but he always shows me:
no GPSdriver found!
Igo dont find my internal GPS, any ideas???
thx
look in the settings
Port 4
Baudrate 57600
Change in the registry
HKLM\System\CurrentControlSet\
GPS IntermediateDriver\Drivers\GPSOneDevice\
PollInterval = 100
and delete these (GPSLogFile.txt+
GPSLogFileBack.txt) files you will find in the \Windows\ folder
take a softreset, then run QuickGPS or if you have time
without QuickGPS...
greetz
hm...ty for the tip...
but nothing change!
igo shows me after autoscan:"no gps driver found"
on Google Maps it works fine with the internal GPS
Schnalle said:
Hi,
the programm and the maps work fine on my TP2 but he always shows me:
no GPSdriver found!
Igo dont find my internal GPS, any ideas???
thx
Click to expand...
Click to collapse
Schnalla,
What regional settings are you using?
For me strangly enough I found that when my local are set to anyting other then English iGo doesn't find the GPS receiver.
So try changing local to English UK or the like (might need a restart).
Then go to iGo GPS settings and run the automatic scan for GPS device.
It worked for me.
Once the GPS receiver is found you can change the Regional settings back to whatever you had before.
IGO8 Problem
Dear all,
I've got a IGO8 problem too. I've got the same version as up here. (The last version with a working TTS)
When i've touch flo 3d turned off (and using the basic windows mobile start screen) is IGO8 working perfect.
After turning on the touch flo 3d is igo working for a short time, but after an hour, when I try to start the application ==> I will get a error. I will get this message 1/2 second after pressing the igo icon and before I can see the loading screen.
the error is: "Failed to reserve virtual address space"
Can anybody help me to let it working with touch flo 3d? Or can somebody explain what the problem is?
Thanks in advance!
Ranney
ranney said:
Dear all,
I've got a IGO8 problem too. I've got the same version as up here. (The last version with a working TTS)
When i've touch flo 3d turned off (and using the basic windows mobile start screen) is IGO8 working perfect.
After turning on the touch flo 3d is igo working for a short time, but after an hour, when I try to start the application ==> I will get a error. I will get this message 1/2 second after pressing the igo icon and before I can see the loading screen.
the error is: "Failed to reserve virtual address space"
Can anybody help me to let it working with touch flo 3d? Or can somebody explain what the problem is?
Thanks in advance!
Ranney
Click to expand...
Click to collapse
I've found some information here: http://forum.xda-developers.com/showthread.php?t=526679&highlight=igo8
But is there an another solution to get it working without resetting the device or disable the TF 3D?
It must have a (Simple?) reason becouse it will work after a reset but not anymore after some time...
Thanks in advance!
Ranney
i am using the same sd card from my tp1 (nothing changed). igo 8.3 is working perfectly.
ranney said:
Dear all,
I've got a IGO8 problem too. I've got the same version as up here. (The last version with a working TTS)
When i've touch flo 3d turned off (and using the basic windows mobile start screen) is IGO8 working perfect.
After turning on the touch flo 3d is igo working for a short time, but after an hour, when I try to start the application ==> I will get a error. I will get this message 1/2 second after pressing the igo icon and before I can see the loading screen.
the error is: "Failed to reserve virtual address space"
Can anybody help me to let it working with touch flo 3d? Or can somebody explain what the problem is?
Thanks in advance!
Ranney
Click to expand...
Click to collapse
hi ranney
with which version tts is working on your tp2?
greez
emanuel
emanuel-paul said:
hi ranney
with which version tts is working on your tp2?
greez
emanuel
Click to expand...
Click to collapse
Hi emanuel,
I've got version 8.3.2.93112. But also problems with TTS now. When I set the voice in IGO to a basic version (non TTS), close igo, reboot, start igo and set it to a TTS ==> it's working. but after shutting it down and restarting ==> TTS is not longer working. (And after a day, IGO cannot be started anymore and the device had to soft reset to let IGO run again...
Ranney

Igo Primo 1.1

I have just tested iGO Primo™ 1.1 on HTC HD Mini
Through several forums and with the help of google I found and took :
iGO Primo™ 1.1 Update (8.5.11.168090) - Nov 17 2010
iGO Primo data.zip for 480x320
GJA 2.14 for primo 1.1 480X320
(GJA 2.14 skin is not mandatory but it is GREAT)
and then copied what I wanted from content iGO 8.3 maps, poi, voices, etc.
after I finished putting all together, I just copied Primo folder on my memory card and started NNGNAVI without that I had to install, and works well (Landscape only)
Igo primo resolution for hd mini
Hi 15MA1L.
November is that I use regularly IGO PRIMO. The relaese I feel the same.
But I would not miss it.
480x380 resolution seems to me that does not exist, but only 480x272 (what I have) as you can see in the ui_go9 data.zip. Please excuse my bad English.
15MA1L said:
I have just tested iGO Primo™ 1.1 on HTC HD Mini
Through several forums and with the help of google I found and took :
iGO Primo™ 1.1 Update (8.5.11.168090) - Nov 17 2010
iGO Primo data.zip for 480x320
GJA 2.14 for primo 1.1 480X320
(GJA 2.14 skin is not mandatory but it is GREAT)
and then copied what I wanted from content iGO 8.3 maps, poi, voices, etc.
after I finished putting all together, I just copied Primo folder on my memory card and started NNGNAVI without that I had to install, and works well (Landscape only)
Click to expand...
Click to collapse
Hello !
You have try to add RDS and TMC on your IGO ....?
(see this thread : http://forum.xda-developers.com/showpost.php?p=3741838&postcount=1)
Let me know !
I'm using TT Navigator on my Mini, but is not easy to add TMC... And the TT Navigator is not released on 320x480, it's a VGA size.. So, it work well but if IGO is designed for HVGA and if I can add TMC... I will change for him !!
King Regards, JBS68
oregon69 said:
Hi 15MA1L.
November is that I use regularly IGO PRIMO. The relaese I feel the same.
But I would not miss it.
480x380 resolution seems to me that does not exist, but only 480x272 (what I have) as you can see in the ui_go9 data.zip. Please excuse my bad English.
Click to expand...
Click to collapse
I think I understand, so I said "iGO Primo data.zip for 480x320" that must download separately and replace the original
DATA.zip I hope that this will not violate the rules of XDA
jbs68 Thanks for your suggestion. I've already tried it a few months ago and failed, I will try again
and I'll tell you the outcome
15MA1L said:
jbs68 Thanks for your suggestion. I've already tried it a few months ago and failed, I will try again
and I'll tell you the outcome
Click to expand...
Click to collapse
Ok, I'm waiting your feedback !
15MA1L said:
I have just tested iGO Primo™ 1.1 on HTC HD Mini
Through several forums and with the help of google I found and took :
iGO Primo™ 1.1 Update (8.5.11.168090) - Nov 17 2010
iGO Primo data.zip for 480x320
GJA 2.14 for primo 1.1 480X320
(GJA 2.14 skin is not mandatory but it is GREAT)
and then copied what I wanted from content iGO 8.3 maps, poi, voices, etc.
after I finished putting all together, I just copied Primo folder on my memory card and started NNGNAVI without that I had to install, and works well (Landscape only)
Click to expand...
Click to collapse
What's GJA 2.14 for primo 1.1 480X320 ..? Is just a skin..? (sorry, but I never use iGO.. I have allways TT periph! Navigator and one 920T)
This means taht iGO is skinnable ..?? Great !
Regards, JBS68
jbs68 said:
Ok, I'm waiting your feedback !
Click to expand...
Click to collapse
I have not yet tested as I ride (live)
15MA1L said:
I have not yet tested as I ride (live)
Click to expand...
Click to collapse
...mhhhh! Yes, but we can think that he work, right ..?
Hi 15MA1L
I had to change over the data.zip, including the skin (480x320 resolution). Of course I had to change the settings to the SYS. My relaese is August 2010. Now you start in full screen! I noticed a less brilliant graphics. And the system more 'slow (I set the sys colored bar to launch the deal seems more and more' memory ram). But better! I have to work a little bit above .... Thanks! Again Sorry for my bad english (Google)
Hi, this RDS TMC program looks good, but I have a problem. I think you need to have your headphones plugged to catch the RDS signal, but when is my headphones plugged, the sound of IGO is going through headphones and I’d like to sound through speaker. My IGo version is 5.5.11.168090. Does anyone have solution?
Rybba said:
Hi, this RDS TMC program looks good, but I have a problem. I think you need to have your headphones plugged to catch the RDS signal, but when is my headphones plugged, the sound of IGO is going through headphones and I’d like to sound through speaker. My IGo version is 5.5.11.168090. Does anyone have solution?
Click to expand...
Click to collapse
Hello !
I think it's better if you post your question on the original thread about the TMC receiver... here : see this thread : http://forum.xda-developers.com/show...38&postcount=1
Regards, JBS68
jbs68 said:
...mhhhh! Yes, but we can think that he work, right ..?
Click to expand...
Click to collapse
I tried many things ...
I tried to use headphones and USB cable as an antenna, in car, on the balcony...
I managed to get TMC messages using the "data tmc + gps" settings on the driver during driver test
A few times I got the channels but not the message. I'm changing the iGo Sys
but iGo gets stuck on finding the channel, or says that no TMC
... very frustrating ... I do not know what to do next. Here is the column head for me ends
15MA1L said:
I tried many things ...
I tried to use headphones and USB cable as an antenna, in car, on the balcony...
I managed to get TMC messages using the "data tmc + gps" settings on the driver during driver test
A few times I got the channels but not the message. I'm changing the iGo Sys
but iGo gets stuck on finding the channel, or says that no TMC
... very frustrating ... I do not know what to do next. Here is the column head for me ends
Click to expand...
Click to collapse
Ok, I understands, not easy !! I should be installed as fast as possible and I would carry out also the tests. Leave me time to install the soft !!
Maybe we can ask in the original thread if he have any solution for your problem ..?
Regards, JBS68
===== Edit =====
Ok, you have try this http://forum.xda-developers.com/showpost.php?p=6631652&postcount=2024
or this http://forum.xda-developers.com/showpost.php?p=6702941&postcount=2033
Hope that help you !....
Hi to All
after many many forum I install my IGO PRIMO on my mini and it works perfectly with all maps, all autovelox, all POI...
I adjust the resolution for our phone...
If You tell me how can I upload the file somewhere I can give You all the Programs ready to be put and works in Your memory cards.
Ricky
Maybe rapidshare, uploading.com is an option?
ok,
I try....
but I have to register me to the site?
If You have already an account in pvt message could You send me Your data in order to avoid another registration to another site...
thanks
I will upload all the complete program ( You will have only to copy it in Your memory card ) with all maps!
Thanks
Ricky
jbs68 said:
Ok, I understands, not easy !! I should be installed as fast as possible and I would carry out also the tests. Leave me time to install the soft !!
Maybe we can ask in the original thread if he have any solution for your problem ..?
Regards, JBS68
===== Edit =====
Ok, you have try this http://forum.xda-developers.com/showpost.php?p=6631652&postcount=2024
or this http://forum.xda-developers.com/showpost.php?p=6702941&postcount=2033
Hope that help you !....
Click to expand...
Click to collapse
I'm sorry but nothing new seems promising but in fact it is mission impossible.
"Maybe we can ask in the original thread if he have any solution for your problem ..?"
The more I read the less I wanted there to write anything,
because others make a specific issue of compatibility with the HTC HD Mini-and still no response and that speaks for itself
Hi Guys...
after many many forum, and many many day and night, I'm uploading on Megaupload my IGO PRIMO 8.5.11.168090 perfectly functioning with all maps!!!
You have only unzip and copy the folder in Your sd and with ( for ex ) ShortCutCreator, create an icon in Your start menu or where You want...
tell me If you are satisfy!!
Ricky
it will be in italian language and with my settings but You can change everything!
it will be 1.63gb...but there are all the maps!...when You download it You can choose only the map You need...the other ones You can keep...maybe in the future 1 of this will be usefull!!!
ok!!!
go there!!

Categories

Resources