Related
Title says it all.
Yep, blocked or somethings gone wrong.
Market enabler says it is working and access is ready. Go into market, select all apps and then change view to paid.
Getting message "no matching content in Android Market"
Killed tasks, started phone from scratch and still the same.
No problems here...
anyone got any help here please?
I can still see paid apps with my rooted while unlocked hero using market enabler.
Fixed it.
Market enabler was defiantly blocked/or bust in on my phone. Reinstall of app failed, everything failed except for....well PM me for details because I ain't posting it here. I have a feeling it may have been a deliberate act either by Google or Netcom though I cannot see how the later could have achieved this.
Same here.
Worked a couple of days ago.
Not anymore.
Have Onecall and that uses telenor and network Norways net.
Not netcom. Is Google that is ****ing us over again.
Same here , since yesterday , i cannot see paid aps in Market with ME
http://code.google.com/p/market-enabler/issues/detail?id=6
Basically it says that 3.0 beta works if you set it to o2-de.
And I can confirm that it works (for how long, who knows)
Right now I'm buying out the market in case someone at Google decides it'll be a good idea to remove paid apps again.
I just wish I could actually locate CoPilot GPS....
death_hawk said:
http://code.google.com/p/market-enabler/issues/detail?id=6
Basically it says that 3.0 beta works if you set it to o2-de.
And I can confirm that it works (for how long, who knows)
Right now I'm buying out the market in case someone at Google decides it'll be a good idea to remove paid apps again.
I just wish I could actually locate CoPilot GPS....
Click to expand...
Click to collapse
Just tried,
It works when installing 3.0 beta like you said. I can also see CoPilot on the list of top paid apps.
Can you tell me if this:
http://www.cyrket.com/package/com.alk.copilot.marketplace.na.full
shows up?
Or if the North American one from here shows up:
http://www.alk.eu.com/copilot/android/
I tried both using all 4 profiles in ME3 and none show up.
Calm down, calm down.
As I said, I have sussed the problem and it is not the blocking of T-mobile. It is your operator resetting your location and there is a simple fix.
I have reproduced the problem and a a workaround. Think about it, how can the operator block you if you are on wifi? The market enabler spoofs the location of the phone so the operator sends a message to the unit to reset location back to the home country provider. Google then blocks that as it was before the phone was Market Enabled. All you have to do get the phone back into a position of spoofing its location.
They could not block access for the T-mobile spoof as that would piss of all American Android users on T-Mobile who are not spoofing but have it for real. Therefore country id, in the marketplace, must be a combination of two factors. Google has just found a way of resetting one. I worked out a way of putting it back.
death_hawk said:
Can you tell me if this:
http://www.cyrket.com/package/com.alk.copilot.marketplace.na.full
shows up?
Or if the North American one from here shows up:
http://www.alk.eu.com/copilot/android/
I tried both using all 4 profiles in ME3 and none show up.
Click to expand...
Click to collapse
Ummm, I guess you're right. It doesn't show up. I guess the US T-Mobile profile is blocked?
OH come on read please.
For the last sodding time it's not blocked! I am on the T-mobile spoof address after resetting my location!
or if nothing works anymore you go the easyest way like i do since yesterday..... takeout my Orange Swiss simcard, put it in my X1, make it as a router, put my german Simyo simcard into my hero and go online by wifi over X1 if im on the way or use my wify at home...... if using a german simcard oder another one from an activated country everything will work wherever you are
Hi All,
Just tried buying an app from the marketplace and got this message:
"Can't get this info right now, please try again later"
I just spent about an hour searching various forums, and there seems to be a real difference of opinion about what this message means. Some posters suggest that it indicates a problem at MS's end (i.e. they're doing maintenance, something is wrong with Windows Live etc), and so the best thing to do is sit tight. Others seem to think it is user problem, and you need to reset the phone, clear the history in IE, turn on/off cookies in IE, etc... Given I didn't change anything on my phone and this just started happening for no obvious reason, I'm inclined to think its an MS problem. Anyone else dealt with this? Advice would be helpful as I don't want to waste time trying all the suggested solutions online...
I have two devices (Trophy). One is OK, but the other the same that you. All are update with the february update...
Just spoke with Microsoft support and they weren't very helpful. Suggested it might be something to do with the IP address the phone is using (I'm currently in Canada, although my Windows Live / Zune account is in the US). That doesn't really make sense to me, as I have been using the phone in Canada since the Feb update with no problems - why should it suddenly have a problem with the IP address? Also, I can still use my Zune Pass...
Sorry my english. I uninstall all aplications with updates in marketplace in the device that not connect. But remains one: Xbox Live Extras. With this device I can't connect to Xbox live. ¿Can you connect to Xbox live? The another device that it's right connect without problems...
Today it works... This night made changes in the profile of XBox Live... But I dón't know if had been casuality...
I have the same problem with my hd7, in spain, since this afternoon i cant buy anything on the market place... xbox live works, zunepass works but no market i cant get nothing even free stuff does not work... any ideas?
Count me in on the Market app install problem. Been trying all day to install some apps and they won't. I get the same message as the OP.
quantum on att here. same problem off and on. i find that if i wait for a few seconds (as if to have the marketplace dumbware to finish loading), and then tap "install" it usually goes through. when it goes through, it says "purchasing" rather than showing only the dots.
Haven't had any problems since I did a hard reset and then "rebuilt" the phone with a Canadian Windows Live account. Can't access my Zune Pass on the phone anymore, of course...
Any chance the update did something to our phones? Has everyone posting here had the update?
BenJG said:
Haven't had any problems since I did a hard reset and then "rebuilt" the phone with a Canadian Windows Live account. Can't access my Zune Pass on the phone anymore, of course...
Any chance the update did something to our phones? Has everyone posting here had the update?
Click to expand...
Click to collapse
Not mine. Still 7004
The same for me with 7004, 7008 and nodo update.
I test one thing : changing my windows live id wth another email adress
it works like a chrm
so th bug is due to the windows live account and not the market
grrrr, i loss all the programs i've been purchasing before!
Seiya said:
The same for me with 7004, 7008 and nodo update.
I test one thing : changing my windows live id wth another email adress
it works like a chrm
so th bug is due to the windows live account and not the market
grrrr, i loss all the programs i've been purchasing before!
Click to expand...
Click to collapse
The Market seems to be working now. Apps are now installing.
Can anyone else confirm that the problem has now resolved itself? I'm not all that eek to hard reset my phone again and go back to my original live account if it's not going to make a difference...
I just got this problem now! grr, hard reset for no reason, ffs!
Hard reset and set up with US-based account. All working perfectly again. I suspect this problem has something to do with our Live accounts at Microsoft's end. If it happen to me again, I think I'll just wait for things to (hopefully) resolve themselves.
I was having this issue for a week now and fixed it today about 5 hours ago actually. I was looking to see what I may have done recently to cause the issue and I had cookies disabled. Once I re-enabled it, everything worked again.
Well it Works for me again...
I just went to setup one of my new units and even with the router blocking the 2 urls which worked fine yesterday my unit tonight did in fact take the update and is now at 51.1.4.0 !
Is anyone aware of a new server that Amazon is using to push updates when first setting up the unit??? This is very upsetting!
I CANNOT CHANGE THE TITLE OF THIS THREAD BUT DISCOVERED MY ROUTER WAS NOT BLOCKING URLS PROPERLY. WITH A NEW ROUTER THAT IS BLOCKING THE CURRENT URLS THE UNIT WILL NOT LOAD SO MY ASSUMPTION WAS INCORRECT AND I APOLOGIZE FOR ANY CONFUSION THAT THIS POST MIGHT HAVE CAUSED!!
(Perhaps a mod can change the title of this thread to a question instead of a statement???)
This is not good news. Hopefully someone has an answer for you as I am curious as well. I still have a couple that I need to set-up and really don't want to lose root.
fxbill said:
I just went to setup one of my new units and even with the router blocking the 2 urls which worked fine yesterday my unit tonight did in fact take the update and is now at 51.1.4.0 !
Is anyone aware of a new server that Amazon is using to push updates when first setting up the unit??? This is very upsetting!
Click to expand...
Click to collapse
Mine had something weird happen yesterday too. I was trying to backup my XBMC using adbFire and kept getting disconnected. So I'd connect again, get an error message, connect, then get disconnected. When it finally connected with a solid connection, I noticed that the Amazon Updates went from being turned OFF to ON. I unplugged everything and blocked all traffic through my modem before reconnecting. I've done a few reboots since then and everything is back to normal...on 51.1.1.0 with updates back off.
It felt like Amazon was trying to push an update to my unit, but I have no way to prove that. I'm very interested in seeing what is going on.
Well it is a possibility... Just glad I don't have to worry to much about it with CWM installed on all my FTV's...
Anyway... Guess @AFTVnews.com or some of those experiencing the problems can sniff if anything has changed using the WireShark prog. :cyclops:
Y314K said:
Well it is a possibility... Just glad I don't have to worry to much about it with CWM installed on all my FTV's...
Anyway... Guess @AFTVnews.com or some of those experiencing the problems can sniff if anything has changed using the WireShark prog. :cyclops:
Click to expand...
Click to collapse
Just wish people weren't bricking their devices trying to load CWM...
spyder3 said:
Just wish people weren't bricking their devices trying to load CWM...
Click to expand...
Click to collapse
The problem I've seen are folks starting from the same info point (guide/order) while their AFTV's are in different device states. It's not hard to do at all once you know from where you are starting. That way you can map out the correct order of steps with the Apps... You do have to choose weather to do it manually thru ADB or with an APP... I trust the APP more then doing it manually... I have seen folks trying to do stuff from the guides like the renaming of FW or Recovery files while trying to use the APP which is not necessary(Not sure if the .zip is being renamed twice, manually & by the app). Also RBox mentioned he is working on trying to stop the possible bricking....
Start at the first post here to get an idea how easy it should be. But the steps order or numbers can change depending what FW you are starting at & if it's a new out of the box or if its one that needs to be FW downgraded or both Recovery & FW downgraded.
Read page 47 just to familiarize yourself with the process. Don't try it right now.
http://forum.xda-developers.com/showthread.php?t=2736774&page=47
If the problem is a new IP address that needs to be blocked. You need to wait for confirmation. If you can't wait then I would try to do the Stock Recovery Downgrade/ReRoot/Disable OTA Updates/FW Downgrade/CWM Installation, etc with only ADB allowed aka Offline. But not sure how some of the changes will require internet... Like to reconnect to your Amazon account. I would wait for confirmation of a new IP or other problem.. Probably offline...
spyder3 said:
Just wish people weren't bricking their devices trying to load CWM...
Click to expand...
Click to collapse
I don't know of anyone who bricked installing CWM.
rbox said:
I don't know of anyone who bricked installing CWM.
Click to expand...
Click to collapse
Completely Correct... Some folks have run into problems during the downgrading. But even for them the keyboard trick with patience should/have get them back on the road to CWM. Got confirmation on a few threads here of folks getting CWM installed after getting stuck with the white Amazon screen or black screen.
I just tested with a Fire TV running stock 51.1.3.0_user_513011820 and it tried to download 51.1.4.0_user_514006420 from the same domain and URL as it always had. I then factory reset it and it again tried to download 51.1.4.0_user_514006420 during the initial setup form the same domain: amzdigitaldownloads.edgesuite.net
So based on this test, I see no indication the update URL has changed. Of Course, it's possible Amazon is using a new URL for some Fire TVs while others are using the known URLs.
I'll continue checking periodically and report back if the URL changes for this particular FIre TV.
AFTVnews.com said:
I just tested with a Fire TV running stock 51.1.3.0_user_513011820 and it tried to download 51.1.4.0_user_514006420 from the same domain and URL as it always had. I then factory reset it and it again tried to download 51.1.4.0_user_514006420 during the initial setup form the same domain: amzdigitaldownloads.edgesuite.net
So based on this test, I see no indication the update URL has changed. Of Course, it's possible Amazon is using a new URL for some Fire TVs while others are using the known URLs.
I'll continue checking periodically and report back if the URL changes for this particular FIre TV.
Click to expand...
Click to collapse
You didn't indicate whether it took the new firmware or not....did it upgrade to 51.1.4.0 or download the firmware?
I had a thought about this last night, but of course it's too late to try it on my units, but my router has 2 options....One is to block specific URLs which is what I did. The other is to only allow specific urls to be accessed. I'm wondering if you only allowed firs-ta-g7g.amazon.com to be accessed since you need that to register the unit and complete the setup if you could still get through the setup routine. It wouldn't allow any connection except to firs-ta-g7g.amazon.com. Don't have a unit to try it with, but it might just work and if not the worst that would happen is that you wouldn't get through the setup....no harm done.
fxbill said:
You didn't indicate whether it took the new firmware or not....did it upgrade to 51.1.4.0 or download the firmware?
I had a thought about this last night, but of course it's too late to try it on my units, but my router has 2 options....One is to block specific URLs which is what I did. The other is to only allow specific urls to be accessed. I'm wondering if you only allowed firs-ta-g7g.amazon.com to be accessed since you need that to register the unit and complete the setup if you could still get through the setup routine. It wouldn't allow any connection except to firs-ta-g7g.amazon.com. Don't have a unit to try it with, but it might just work and if not the worst that would happen is that you wouldn't get through the setup....no harm done.
Click to expand...
Click to collapse
I had the download domain blocked so it couldn't download the update. As for your suggestion, I tried it with one of the earlier units that would not proceed past a failed update. I monitored every domain it tried to access and slowly fed it more access one domain at a time. The result was always the same: it gives various error messages because it can't reach certain domains. It never got past the update point in the initial setup.
fxbill said:
I just went to setup one of my new units and even with the router blocking the 2 urls which worked fine yesterday my unit tonight did in fact take the update and is now at 51.1.4.0 !
Is anyone aware of a new server that Amazon is using to push updates when first setting up the unit??? This is very upsetting!
Click to expand...
Click to collapse
If you are blocking using a ASUS router that might be the problem. When I loaded the latest ASUS firmware on my RT-AC66U all my blocked URLs stopped being blocked. I had to step back to an old firmware to get the feature working again
krawhitham said:
If you are blocking using a ASUS router that might be the problem. When I loaded the latest ASUS firmware on my RT-AC66U all my blocked URLs stopped being blocked. I had to step back to an old firmware to get the feature working again
Click to expand...
Click to collapse
That's exactly what happened!!! I put facebook and ebay on the block list just to check and it wasn't blocking either of them! I'm off to get a new NetGear tomorrow. They have a "genie" program that is extremely easy to use for blocking sites or words (or update numbers) and it's only $39. I took one of the updated units back to Staples today and told them it had connectivity problems...( it really did....it connected with the darned upgrader!) and asked the girl in this tiny store if she would get one from the back that was way in the back and on the bottom of the pile if she could. She actually did for me! It's the lowest serial number I own now, but I'm not touching it until I get the new router and prove to myself that the sites are being blocked. I need the break and a little sleep anyway....too many hours at this for the last week.
By the way.... I do believe I have a way of downgrading the new firmware to any older firmware that was ever out. I'm going to have to sacrifice a unit to verify, but if they store the firmware on a TSOP I can do it. Clone time coming up!
I'm not a software guy, but am a hellofa hardware tech. Did it with satellite receivers for years..... ( Still love tubes more than any solid state stuff though!)
fxbill said:
That's exactly what happened!!! I put facebook and ebay on the block list just to check and it wasn't blocking either of them! I'm off to get a new NetGear tomorrow. They have a "genie" program that is extremely easy to use for blocking sites or words (or update numbers) and it's only $39. I took one of the updated units back to Staples today and told them it had connectivity problems...( it really did....it connected with the darned upgrader!) and asked the girl in this tiny store if she would get one from the back that was way in the back and on the bottom of the pile if she could. She actually did for me! It's the lowest serial number I own now, but I'm not touching it until I get the new router and prove to myself that the sites are being blocked. I need the break and a little sleep anyway....too many hours at this for the last week.
By the way.... I do believe I have a way of downgrading the new firmware to any older firmware that was ever out. I'm going to have to sacrifice a unit to verify, but if they store the firmware on a TSOP I can do it. Clone time coming up!
I'm not a software guy, but am a hellofa hardware tech. Did it with satellite receivers for years..... ( Still love tubes more than any solid state stuff though!)
Click to expand...
Click to collapse
It just dawned on me....with all of the excellent coders here and knowing that with Backtrack you can spoof a url or an IP. Someone could discover where the units are updating from and where they connect to and spoof the information..( along with the older firmware) and never actually have to connect with Amazon. The unit would think that it is connecting and download whatever it was fed and finish the initial install in order to root it.....just a wild thought, but I think a good programer could come up with a way to do it.
fxbill said:
It just dawned on me....with all of the excellent coders here and knowing that with Backtrack you can spoof a url or an IP. Someone could discover where the units are updating from and where they connect to and spoof the information..( along with the older firmware) and never actually have to connect with Amazon. The unit would think that it is connecting and download whatever it was fed and finish the initial install in order to root it.....just a wild thought, but I think a good programer could come up with a way to do it.
Click to expand...
Click to collapse
RBox & AFTVNews.com & others have already looked into this. Do a search for spoofing on the full thread & u'll probably find it.. Basically there are parts that are encrypted & we can't give the FTV the right answer to allow the older FW to be flashed.
http://forum.xda-developers.com/fire-tv/help/trick-amazon-update-url-redirect-to-t2900031
Y314K said:
RBox & AFTVNews.com & others have already looked into this. Do a search for spoofing on the full thread & u'll probably find it.. Basically there are parts that are encrypted & we can't give the FTV the right answer to allow the older FW to be flashed.
Click to expand...
Click to collapse
There are 2 things to spoof. One is the response from softwareupdates.amazon.com. Aside from the fact that if you spoof it the server has to be using a valid certificate (which you won't get), it's response is signed and encrypted. The second thing to spoof is the actual firmware download. That has to be signed or else it will reject it. It also has to match the version it's expecting to download. So you can't spoof the response that would make the fire tv download an old version, and you can't spoof the update itself because it won't match what it wants.
Furthmore... Backtrack has nothing to do with it. Backtrack is a huge piece of **** that doesn't do anything magical that any SANE Linux dist can't do. And what the... XDA censors? How lame is that...
fxbill said:
That's exactly what happened!!! I put facebook and ebay on the block list just to check and it wasn't blocking either of them! I'm off to get a new NetGear tomorrow. They have a "genie" program that is extremely easy to use for blocking sites or words (or update numbers) and it's only $39. I took one of the updated units back to Staples today and told them it had connectivity problems...( it really did....it connected with the darned upgrader!) and asked the girl in this tiny store if she would get one from the back that was way in the back and on the bottom of the pile if she could. She actually did for me! It's the lowest serial number I own now, but I'm not touching it until I get the new router and prove to myself that the sites are being blocked. I need the break and a little sleep anyway....too many hours at this for the last week.
By the way.... I do believe I have a way of downgrading the new firmware to any older firmware that was ever out. I'm going to have to sacrifice a unit to verify, but if they store the firmware on a TSOP I can do it. Clone time coming up!
I'm not a software guy, but am a hellofa hardware tech. Did it with satellite receivers for years..... ( Still love tubes more than any solid state stuff though!)
Click to expand...
Click to collapse
fxbill said:
I just went to setup one of my new units and even with the router blocking the 2 urls which worked fine yesterday my unit tonight did in fact take the update and is now at 51.1.4.0 !
Is anyone aware of a new server that Amazon is using to push updates when first setting up the unit??? This is very upsetting!
Click to expand...
Click to collapse
I would advice you add a note to the #1 post saying that it's been resolved & it was a Router Software problem (in bold). Maybe change the title of the thread too. Some folks might not read past the tittle or first posts & start to repeat that there is a new IP updating FTV's when that is not the case.
Tip: Tomato FW Routers block IP's like a BOSS!!!
Urls dont work
I have blocked the urls amzdigitaldownloads.edgesuite softwareupdates.amazon.com through router before setting up my firetv and it had updated to the latest firmware uk version so just to let people know they do not work is amazon using new urls for updating
Y314K said:
I would advice you add a note to the #1 post saying that it's been resolved & it was a Router Software problem (in bold). Maybe change the title of the thread too. Some folks might not read past the tittle or first posts & start to repeat that there is a new IP updating FTV's when that is not the case.
Tip: Tomato FW Routers block IP's like a BOSS!!!
Click to expand...
Click to collapse
I plan on doing that, but only after I pick up the new router today and verify. Thanks for the tip on the router!
( Just discovered that I can't edit the title of the thread.)
rbox said:
There are 2 things to spoof. One is the response from softwareupdates.amazon.com. Aside from the fact that if you spoof it the server has to be using a valid certificate (which you won't get), it's response is signed and encrypted. The second thing to spoof is the actual firmware download. That has to be signed or else it will reject it. It also has to match the version it's expecting to download. So you can't spoof the response that would make the fire tv download an old version, and you can't spoof the update itself because it won't match what it wants.
Furthmore... Backtrack has nothing to do with it. Backtrack is a huge piece of **** that doesn't do anything magical that any SANE Linux dist can't do. And what the... XDA censors? How lame is that...
Click to expand...
Click to collapse
I only brought up Backtrack as an example. It's merely a collection of programs written by other coders. Say what you will about it. Makes no difference to me, but it has served me pretty well since I am not a coder and have little knowledge in writing my own codes. Kudos to you for being able to. As I stated, I'm a hardware person and a technician. I can design a board, but programming for me is an entirely different story. Years ago satellite TV receivers had a similar issue where a receiver would not accept a card that was not the correct card for the unit. It was called the ZKT...( zero knowledge test) The receiver had some information encoded in the prom... (supposedly some sort of question that it asked of the card). The card also had some info coded into it. Neither had any purpose by itself, but when a card was inserted into the unit the unit sent out the encoded "question". If the card responded with anything other than the correct information the unit would not function. A coder discovered a way to program eproms that did not have this ZKT information in it and after programming an eprom and replacing the prom in the unit with the newly coded eprom the unit would accept any card that was put into it.
I'm only stating this as an example. It might come down to cloning the eprom from one good unit to one that has the newer firmware on it, but I feel very confident that someone can and will do it at some point. I rarely ever say it can't be done....too many times have I been proven wrong by someone knowing much more than I do and no matter how good you might be at something someone a little or a lot better is going to come along and do what you couldn't.
Im using a HTC 10 (EU variant). Today i was scrolling through "Netguard" (if you dont know it, its an app to prevent other apps from internet access), since i configured it to show system apps it displays way more apps than the normal app overview in the settings. In there i found an app called "RootPA" and one called "root", which seems strange since i didnt unlock the bootloader or root on my own. The details in the RootPA entry say "com.gd.mobicore.pa", no idea if thats helpfull to determine the origin of this mysterious app.
Can you help me with this?
Did you Google it?
I did, but the results were not realy usefull. I found someone with a modded Galaxy S3 who deleted a RootPA on accident and broke stuff, but that ssems unrelated. Are there any things i could do to find out more about the app installed on my phone without root?
I cant say its something I've ever seen. If this person in the past removed it, and it broke stuff, that would suggest that it may have been a system app and he was rooted. From what I managed to find on google, it is part of a security suite (mobicore) used by networks to monitor what the state of the phone is, presumably incase something happens, and it was the user fault, and they know for a fact because they have logs of what the phone has done.
[ACCESS_NETWORK_STATE] Allows applications to access information about networks
[INTERNET] Allows applications to open network sockets. (i.e send information)
[READ_EXTERNAL_STORAGE] Allows an application to read from external storage.
[READ_PHONE_STATE] Allows read only access to phone state.
A friend of mine got his HTC 10 2 days ago, ill ask him to look for this app. Its unlikely we would have the same virus/whatever installed.
Edit: He just reseted his 10 (due to missing language options, but thats another topic), but still found "root" and "rootPA" on his phone, so its preinstalled (although i still dont understand whats its purpose).
RootPA is provides service for provisioning secure applications that run on ARM trustzone and t-base OS (formerly mobicore). It is preinstalled in some vendors Android devices (search for this string on the internet: htc-devices-to-incorporate-trustonic-t-base-tee), but mostly unused as far as I know. The source code of some versions is available on the Internet (e.g. on github /Faryaab/android_hardware_samsung_slsi_exynos5410/tree/master/mobicore/rootpa).
It has nothing to to with rooting or unrooting the device.
PA route is very dangerous I had some I have somebody who has hacked into my phone through this particular program so to speak I have a lot of issues right now with my phone trying to get them off of my phone and this seems to be the root cause or the start of it have anybody knows how I can clear my phone and my Ram from the Vicious hacker I appreciate it I'm tired of being watched and recorded everything I do
Illfidusoon12 said:
PA route is very dangerous I had some I have somebody who has hacked into my phone through this particular program so to speak I have a lot of issues right now with my phone trying to get them off of my phone and this seems to be the root cause or the start of it have anybody knows how I can clear my phone and my Ram from the Vicious hacker I appreciate it I'm tired of being watched and recorded everything I do
Click to expand...
Click to collapse
PA route..... .rootPA ......2 different things. Hacked ? Unlikely, I think some OCD is kicking in. Want to be clean? RUU the device and do not restore anything
As the title says my tablet is a VK700 by LG and has android ver 5.0.2 build no is LRX22G software ver VK70029A, no mods or rooted or anything, but there is an issue that I cannot fix using factory resets or updates. I am hoping someone here will be able to assist me. There are some apps on my tablet, as of this post it's all my internet browsers, MeowMeow Star Acres, Class Royale, Clash of Clans, Ancient Aliens, Forge of Empires, SimCity Build It and King of Avalon. These are the ones I know of, but it crashes the games out like I just hit the Home button. No error messages or anything just blank screen n then the menu. And some apps/games crash ALOT more then others. Star Acres & Clash Royale crash alot more then Forge of Empires or King of Avalon, which almost NEVER does it. Which isn't making any sense to me. I have other games which have NEVER done it one time. The other one is on games like King of Avalon I hit the chat menu for example, the keyboard pops up, I type then i get either A)The keyboard just goes away and can't get it back easily and/or i hit the button to delete text and I get something like this "likethis this".
I thought of putting custom android on it, but if I can fix this that works too. Also would be nice to get rid of apps that I have never opened one time. Thanks.
Joe
Anyone?
Joe
Ok there's like 23k members online and apperently not ONE person can help???? I need to get this tablet fixed....
Joe
jknightandkarr said:
Ok there's like 23k members online and apperently not ONE person can help???? I need to get this tablet fixed....
Joe
Click to expand...
Click to collapse
Hi Joe,
Apparently we are the only two people to have purchased this tablet. I do have one question and possible solution for you. Like you, my apps were quitting randomly on me and I could not figure out why. I once had LTE coverage with my tablet but had discontinued that service once I had the device off contract with Verizon. Is that the same with you? Do you use it exclusively on Wi-Fi? If you do, I suggest you remove the SIM card from the device and see if that helps. For some odd reason that helped me tremendously.
Best of Luck!
Newman4185 said:
Hi Joe,
Apparently we are the only two people to have purchased this tablet. I do have one question and possible solution for you. Like you, my apps were quitting randomly on me and I could not figure out why. I once had LTE coverage with my tablet but had discontinued that service once I had the device off contract with Verizon. Is that the same with you? Do you use it exclusively on Wi-Fi? If you do, I suggest you remove the SIM card from the device and see if that helps. For some odd reason that helped me tremendously.
Best of Luck!
Click to expand...
Click to collapse
Thats quality made from LG....... Ok, I will try that. Thanks. I as well no longer have service on it. Will remove it and try my apps n see if that solves it.
Joe