Related
Hey guys,
I've been prowling around these sectors ever since I got my Xoom, searching for the perfect case.
What I wanted:
The flexibility of the Zoogue case really appealed to me - I like the idea of being able to choose the angle of viewing. I also wanted any case to be able to be able to provide a setting for only a slight tilt when I wanted to type.
BUT the high price tag really put me off.
Also, I wanted it to be pretty thin. The Xoom is big enough without me adding to its bulk.
After much searching, I think I found the perfect one, so I thought I'd share my experiences (Here's the link where I bought it from: http://www.ebay.com.au/itm/Black-Fo...Accessories&hash=item3f0a05cb28#ht_3816wt_947)
Firstly, the price tag attached to this thing is ridiculously awesome. At first, I bought it thinking 'why not? it's less than $25!', but the product turned out to be even more awesome.
Firstly, it's really thin, but covers the tablet nicely. Secondly, to a certain extent, you can also choose what viewing angle you want, which is awesome. I say to a certain extent, because after a while, you run out of cover to stick the velcro on (have a look at the attached picture)
All the cutouts are there, but you can't charge with the case closed. I don't think this is a problem, because the cover folds back on itself nicely, so you can keep it open to charge. Which brings me to the next plus: it's designed so that it folds back on itself and it's actually pretty comfortable to hold in portrait mode (I've heard that this isn't the case with the official Moto one).
The only minor flaw I've found is that on mine, the top left corner is slightly higher than the top right - what this means is that the front-facing camera is covered ever so slightly by the strip of leather running under it. The picture I attached kind of exaggerates it a bit; it's not that bad. When I booted up the front-facing camera, there's just a line across the very bottom of the image. I'm not sure if this is on all their cases, so it might just be mine.
One more note: When I first heard about cases using velcro, I immediately wondered if the velcro would wear out over time, like in some of my bags. If you're also wondering that, then don't worry! This doesn't use the traditional velcro. You know how traditionally, the fuzzy part has all the loops and the the other part would like... 'hook' onto it and that's how it stuck? Well, this uses a different sort... one that looks like it won't wear out easily. Also, this case is pretty damn sturdy when you've got it propped up. I've tested this out extensively, and even when poking at the screen with a fair bit of force, it never topples.
Finally, before anyone asks: no, I'm not in any way affiliated with the seller, I'm just one super-happy customer. Even though it says it's free shipping, they still provided tracking for me. They even took a picture of the package before they sent it off and sent that to me, which was an eBay first. Plus, the person dealing with the emails just seems really nice, based on the correspondences I've had.
So pretty much, this case is amazing (for me, anyway). I don't think it's real leather, but for under $25, I wasn't expecting it. Plus, real leather is a ***** to take care of, anyway. Whether you need this case will probably come down to what you want out of a case, but this one has been pretty versatile for me (I've had it for about a month now).
EDIT: I didn't realise how much I wrote.... can you tell I'm procrastinating?
EDIT2: I forgot to add that there's even a magnet that holds the cover closed. It's not too strong but not too weak, either. Quite nifty, actually!
screen
is the screen filtered
wyllem said:
is the screen filtered
Click to expand...
Click to collapse
Nope, there's nothing on the screen area at all. That's my matte screen protector that I bought off eBay. It was the cheapest one I could find and it actually works quite well!
i got this one. will post pics and give feedback as soon as i got it.
Well, I really like it myself, so it'll be interesting to hear feedback from other people too.
And daaaang it, it's on sale now (I hate when things go on sale after I buy it!) Oh well, it was already cheap to begin with
Just a very quick review of my Easecase E5 which arrived about a week ago.
You can see pictures of it by search eBay for "Easecase E5 galaxy note" (without quotes), there's one here : http://www.ebay.co.uk/itm/E5-EASECA..._MobilePhonesCasesPouches&hash=item5ae4059699
(I did get a bit of a shock when I saw that - that is my actual one - with my name on it, I was just searching for one at random)
Delivery time:
As mentioned in other parts of this forum, delivery times for Easecase are pretty woeful. I ordered on the 25th of November and, it arrived here a few days over a month later in Sweden. The problem seems to be largely that they ship via China Post which is quit slow - they dispatched it (with trackable* shipping) within about a week. I bought it through eBay, so I am not sure if they have another outlet, and, they make it very clear on their eBay items that they will take a looong time to ship, so, I can't take any points off them there.
Build quality:
It is beautifully put together. There's a slot running down the inner spine for the stylus, and my name is embossed on the front. I would characterise it as high quality.
Outside:
I opted for the magnetic clasp. It isn't a very strong magnet, but does the job.
Apart from the clasp, there's just the embossing on the outside, and, a neat seam around the edge.
Inside:
There are 2 bill pockets inside, both of which are *very* deep. They're about as deep as the note is high.
When it is fully opened, there are 5 credit card pockets on the left. Note that these seem to be individual pockets, separated from each other internally. Cards fit vertically into these pockets. The front of the pockets stretches a bit over 2 thirds of the way from the far left of the case to the spine. Behind the pockets is a sleeve about 1/3 wider than the short side of a credit card where you could fold bank notes* (remember this, I'll come back to it.
As I said, along the inner spine is slot for the stylus.
On the right is where the not goes. It slots in (quite snugly) from the top. The top is open, so you can get to the headphone port. There's a hole in the left for the volume control, a hole in the right for the power button, and, a hole in the bottom for access to the USB port.
Looking at the front, the home and hardware buttons are all accessible as part of the screen area. They've also neatly cut out around the top speaker and, the front camera.
Protection:
Very good. If the magnetic clasp doesn't come undone during a fall, then, it'd be very hard to break the screen. It is nice thick leather, and you might even be able to drop a brick on it when closed without breaking the screen.
It still won't help you if you drop it in the toilet as some poor chap here has apparently done.
Usage:
It is very bulky. Like one of those filofax jobs people used to (still?) have.
I'm used to big gadgets, so I cope, but you wouldn't get it into tight jeans pockets. I do squeeze it, with some discomfort into my front trousers pocket.
You don't want to talk on the phone with the cover on for more than brief calls, you look like an idiot. Most of the time I pull it out of the cover for calls, or, use a bluetooth headset.
Using the rear camera requires removing from the cover.
General browsing/emailing etc is fine with the cover on.
Fortunately removing the phone is a fairly quick procedure, as is putting it back it. I imagine it'll get easier still as the leather stretches a touch.
One annoyance is, as the leather reaches right to the top of the touch screen, if the phone slips up slightly, it can be difficult or impossible to pull down the notifications bar. When in landscape, this isn't an issue as the phone can't move left/right in the case.
Summary/thoughts:
I wish I'd bought the one without the bank note pockets. That'd reduce the bulk considerably and you could still stick notes behind your cards (see * above). You can also use the rear facing camera with the non-bank note version (E4).
On balance, I am pleased I bought it though, it is of high quality and, it is great having your phone and wallet all in the one thing - it also means you can ring your wallet to find it when you are in a hurry to head to work
If anyone has any questions, I'd be happy to answer them.
My recommendation for anyone thinking of getting one of these is to get the E4 and not this.
They don't seem to have any E4's on eBay at the moment for the note, but I am sure I have seen one there. Here's one for the Desire HD - I am sure it gets the point across.
http://www.ebay.co.uk/itm/E4-EASECA...sesPouches&hash=item5647be7cbf#ht_5657wt_1016
Cheers,
Kent
kentmartin said:
You don't want to talk on the phone with the cover on for more than brief calls, you look like an idiot. Most of the time I pull it out of the cover for calls, or, use a bluetooth headset.
One annoyance is, as the leather reaches right to the top of the touch screen, if the phone slips up slightly, it can be difficult or impossible to pull down the notifications bar. When in landscape, this isn't an issue as the phone can't move left/right in the case.
Click to expand...
Click to collapse
Two quick thoughts:
1) When calling, can't you fold the case cover back 180 degrees?
2) Some launchers (adwlauncher does this) allow to swipe down anywhere to lower the notification bar, so you don't need to touch the very top.
- Frank
ChodTheWacko said:
Two quick thoughts:
1) When calling, can't you fold the case cover back 180 degrees?
Click to expand...
Click to collapse
No, the banknotes pockets kind of open so it gets more bulky and wants to spring back to about 180 degrees (where 0 is closed, 180 is wide open and 360 is the position you suggest), but I suspect you could with the E4 model.
2) Some launchers (adwlauncher does this) allow to swipe down anywhere to lower the notification bar, so you don't need to touch the very top.
Click to expand...
Click to collapse
Yes - I read about that setting a while back, but have never used it, thanks for reminding me - it is now enabled for the swipe down gesture (hide dock was annoying me anyway).
Hi, thanks for the review, i've been stuck deciding between the E5 and the E4, due to the E5 having the bill slot, which i would think is really good compared to folding the bills under the cards.
Can you take a picture of the case when it's fully loaded, both open and closed?
e.g. all card slots used, and the bills folded and slotted under the cards
That would probably help sway my decision, if that slot + cards do not bulk up the entire wallet.
More info // pics in my thread. http://forum.xda-developers.com/showthread.php?t=1419678
I love those case, but it's sucks when they cost so much!
It's should be 10$ max.
peanuts and monkeys
i hope to order this case by the end of this month, i've emailed them some questions on customisation, hopefully it's permitted, then can go forward with this.
the E5 with wallet style slot is definitely too bulky. I bought one for my Desire HD with modified size to fit the DHD with Otterbox. After receiving it, tested once with DHD and sit in my drawer collecting dust ever since.
EvoFighter said:
the E5 with wallet style slot is definitely too bulky. I bought one for my Desire HD with modified size to fit the DHD with Otterbox. After receiving it, tested once with DHD and sit in my drawer collecting dust ever since.
Click to expand...
Click to collapse
Ya know I thought the same thing at first, but I just got a pack of 3 extra batteries and I find I can put two of em in the wallet and also a cleaning cloth and everything fits great.
In terms of customizations I wonder if a small bit for some change could be added.
Its beautiful.
Easecase E5 looks good.
This is a genuine leather case, and very good quality construction. They also responded well to my customization request (I wanted a 65mm horizontal belt loop added to mine).
Only $10 max is out of the question. Worth 3 to 4 times that much. It includes branding of your own name as well. It's a very classy leather case/wallet.
Could you please share a photo were the Note is next to the case just to compare the size of the case?
Hey great review. I really love the customization of these cases and I recently bought a galaxy note us version from ATT so ive been doing some research for a quality wallet type case for my note (will arrive monday) I was just wondering, would this case or the E4 case which is what ill probably get be fine for the american ATT version. Im pretty sure the dimensions are about the same but im not so sure about the button placements or the charger placements.
The only thing I dont like is the shipping time but not much I can do about it but this case seems to be the best so far that ive found besides the vintage leather case but those dont come in black and have magnetic strips.
Any reply would be appreciated.
So just to recap - will my US ATT galaxy Note i717 be a good match with this case?
dreamstealer2045 said:
Hey great review. I really love the customization of these cases and I recently bought a galaxy note us version from ATT so ive been doing some research for a quality wallet type case for my note (will arrive monday) I was just wondering, would this case or the E4 case which is what ill probably get be fine for the american ATT version. Im pretty sure the dimensions are about the same but im not so sure about the button placements or the charger placements.
The only thing I dont like is the shipping time but not much I can do about it but this case seems to be the best so far that ive found besides the vintage leather case but those dont come in black and have magnetic strips.
Any reply would be appreciated.
So just to recap - will my US ATT galaxy Note i717 be a good match with this case?
Click to expand...
Click to collapse
When I dealt with them, I found them quite responsive, I suggest asking them if it'll fit the i717 - odds on if it doesn't they'll have one that does even if they haven't advertised it yet.
Although I haven't seen it, I'd definitely recommend the E4 over the E5 - I find I don't really need the slots for notes (you can slip folded notes in the bit behind where credit cards go anyway) and, it the banknote pockets block the camera (by necessity) which drives me a bit mad.
Has anybody tried the tetrax mounts yet with their galaxy nexus? Before I purchase one I'm curious of two things.
1. How well does the the magnet stick to the battery door since the battery cover is textured? I have an extra cover that I'll use simply for this.
2. Does the magnet interfere with the NFC and/or screen at all?
In case your not sure what I'm referring to:
http://store.tetrax.us/xway-line/fixway
I have used this on other phones, including my G2, MyTouch 3G and G1 and it worked very well on all those phones. However, due to the textured back on the Galaxy Nexus, the metal button that stick to the battery door does not stay on. I have tried replacing the double sided tape with stronger automotive 3M tape, but that doesn't work either. It'll stay on for a little while and come back off. The only solution would be to find a battery door that is smooth.
I can't answer if it interferes with NFC or the screen, but it shouldn’t. If anything, it might interfere with the magnet on the compass, but that has not been the case with my other phones.
MetalMessiah78 said:
I have used this on other phones, including my G2, MyTouch 3G and G1 and it worked very well on all those phones. However, due to the textured back on the Galaxy Nexus, the metal button that stick to the battery door does not stay on. I have tried replacing the double sided tape with stronger automotive 3M tape, but that doesn't work either. It'll stay on for a little while and come back off. The only solution would be to find a battery door that is smooth.
I can't answer if it interferes with NFC or the screen, but it shouldn’t. If anything, it might interfere with the magnet on the compass, but that has not been the case with my other phones.
Click to expand...
Click to collapse
Thanks,
So you've actually tried it on the GNex and it don't stick very well? Did you by chance try holding it on there for several hours with a strong clamp or anything? I really want one of these but worried it's a waste of money with this phone
I have actually tried it, but not with a clamp. Just following the regular directions. On my other phones, it created a very strong bond and it takes a lot of effort to remove. With the Nexus, it stays on the first couple of times you mount it, but that's about it. It's not an issue with the weight, as the G2 feels twice as heavy as the Nexus, especially with an extra capacity battery. It's the texture on the battery door. It almost feels like it has a Teflon coating.
MetalMessiah78 said:
I have actually tried it, but not with a clamp. Just following the regular directions. On my other phones, it created a very strong bond and it takes a lot of effort to remove. With the Nexus, it stays on the first couple of times you mount it, but that's about it. It's not an issue with the weight, as the G2 feels twice as heavy as the Nexus, especially with an extra capacity battery. It's the texture on the battery door. It almost feels like it has a Teflon coating.
Click to expand...
Click to collapse
Would you mind holding up one of the magnets to the battery door and test out the NFC to see if it interferes with it (if you have the ability to). This is my main question as I could always put the magnet on a case I guess.
Thanks!
I don't have another NFC device to try it right now, but my brother has the Nexus S and I can try it when I see him later tonight. The magnet doesn't go on the battery door though. What you stick on the battery door is just a piece of metal. The actual magnet is on the device that you mount to your dash or vent, so unless you plan on using NFC while it's on your dash, it should not interfere.
Plus, NFC uses low power radio frequency to transfer information (similar to Bluetooth). It does not use magnets. The only thing in the phone that could be affected would be the compass, as it finds your relation to magnetic North. Even then, I'm sure the compass works through software and is not an actual magnet, as it has never affected GPS. As a matter of fact, I have 2 Tetrax products, the one that mounts to the dash, which I have in my car, and the one that you attach to the vent for when I use a rental on trips for the sole purpose of Navigation. As you can imagine, I was very disappointed when I could not get the metal button to stick. I might have to try it with a case also.
MetalMessiah78 said:
I don't have another NFC device to try it right now, but my brother has the Nexus S and I can try it when I see him later tonight. The magnet doesn't go on the battery door though. What you stick on the battery door is just a piece of metal. The actual magnet is on the device that you mount to your dash or vent, so unless you plan on using NFC while it's on your dash, it should not interfere.
Plus, NFC uses low power radio frequency to transfer information (similar to Bluetooth). It does not use magnets. The only thing in the phone that could be affected would be the compass, as it finds your relation to magnetic North. Even then, I'm sure the compass works through software and is not an actual magnet, as it has never affected GPS. As a matter of fact, I have 2 Tetrax products, the one that mounts to the dash, which I have in my car, and the one that you attach to the vent for when I use a rental on trips for the sole purpose of Navigation. As you can imagine, I was very disappointed when I could not get the metal button to stick. I might have to try it with a case also.
Click to expand...
Click to collapse
Awesome so yea I don't think it'll interfere because I was thinking the part you stick to the back of the phone is magnetic, but if your saying it's not all should be well. Either way I went ahead and ordered it yesterday anyway so I'll figure out a way to get it to stick to either the door or a case. Thanks for your insight!
Nope, it's just a metal button. It actually comes with 4 or 5 different ones of all sizes and styles.
I have this installed on my nexus, I put the mount on my dash and the NFC sticker on my knob for the ac that get covered up. Everytime I put my phone on the mount, the nfc changes it to car mode, volume up, full brightness and launches sirius xm radio...works very well, sometimes I have to move it a bit to get to read the nfc, but thats only cause i have the nfc a little too far at the bottom of the phone and it mounts at a slight angle, not due to any interference at all. I have NFC chips all around and never have problems reading them at all, probably a good idea not to mount the metal chip right in the middle of the battery area, just in case. I also used a clamp to hold it on for about 3 or 4 hours and has had little trouble sticking to the texture.
I have had a few incidents if I pull off the phone, rather than slide it off the backing will actually unclip a single clip.
@ejkeebler what do you mean by NFC stickers all around? Did you make stickers to automatically change your settings on your phone? That's brilliant! How did you do it?
I might also have to try a clamp. I don't really want to put a case on my phone.
MetalMessiah78 said:
@ejkeebler what do you mean by NFC stickers all around? Did you make stickers to automatically change your settings on your phone? That's brilliant! How did you do it?
I might also have to try a clamp. I don't really want to put a case on my phone.
Click to expand...
Click to collapse
I also have NFC stickers everywhere. have them when I walk in the front door of my house, one in my office at work, one in each vehicle, one in my wallet LOL. They are awesome. Set them to change settings or do tasker tasks and you can rewrite over them if you ever want to change anything. One of the best phone features I've ever used. That's why i was concerned about the magnets interfering with the NFC!
dcoy82 said:
I also have NFC stickers everywhere. have them when I walk in the front door of my house, one in my office at work, one in each vehicle, one in my wallet LOL. They are awesome. Set them to change settings or do tasker tasks and you can rewrite over them if you ever want to change anything. One of the best phone features I've ever used. That's why i was concerned about the magnets interfering with the NFC!
Click to expand...
Click to collapse
Where can I get / how do I 'program' these NFC Stickers?? This sounds awesome.
raing said:
Where can I get / how do I 'program' these NFC Stickers?? This sounds awesome.
Click to expand...
Click to collapse
A quick search came up with this: http://www.tagstand.com/
Seems like this could open up a whole line of fun options. Would love to hear how others have done it, though.
raing said:
Where can I get / how do I 'program' these NFC Stickers?? This sounds awesome.
Click to expand...
Click to collapse
www.tagstand.com to purchase the tags. Tell him DCoy82 sent you! The 30mm ultralight c circle NDEF formatted seem to be the only ones I've bought that work with the nexus so far.
Once you get them you can download program called NFC Task Launcher off the market to program them.
Sent from my A500 using Tapatalk
dcoy82 said:
www.tagstand.com to purchase the tags. Tell him DCoy82 sent you! The 30mm ultralight c circle NDEF formatted seem to be the only ones I've bought that work with the nexus so far.
Once you get them you can download program called NFC Task Launcher off the market to program them.
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
That is so awesome. This is my first phone with NFC so I'm barely starting to learn all the cool things that you can do with it. I tried Android Beam for the first time with my brother on Tuesday and it works great, though I wish you could beam other things such as pictures. By the way, the metal button does not interfere with NFC. I will let them know that you recommended me. Thank you!
If your interested in NFC, here's a few spots that got me started
http://androidforums.com/nexus-s/336155-what-do-you-use-nfc-tasker.html
http://www.readwriteweb.com/archives/weekend_project_make_your_own_nfc_tags.php
http://www.youtube.com/watch?v=LnqmyNEQPq0&feature=email&email=comment_reply_received
and the tags I bought were from here:
http://tagsfordroid.com/tags/Home.html
I got them cause i liked the having the android on them, i think they are a tiny bit less expensive elsewhere, and these are a little thicker than I'd like (like a puffy sticker, about the same thickness of a penny) but you can get many in other places.
by itself i'm not sure nfc task launcher does it for me, but in combination with tasker, it's ridiculous how much can be done....would still love to see what others have come up with.
I love those stickers with the Android! Thanks for the links. I will need to read up on it more. I am definitely interested. This is a lot more exciting stuff then what Google showed off at the I/O last year!
Thats a good idea. Being in IT, we have dead Hard Drives laying around that have awesome magnets in them. They're real slim. I bet I could superglue one to my nexus's battery cover for under the TPU case that would hold. They're thin so it might not screw with the case (but it might).
ejkeebler said:
I got them cause i liked the having the android on them, i think they are a tiny bit less expensive elsewhere, and these are a little thicker than I'd like (like a puffy sticker, about the same thickness of a penny) but you can get many in other places.
Click to expand...
Click to collapse
Yeah, it looks like it's $8 for 2. I just picked up 5 over at tagstand.com for the same price and found 10 for $13 over at http://buynfcstickers.com.
Hopefully you guys are all having good experience with the guy at tag stand. His customer service was great for me and I'll definatley be going back there in the future.
Oh and by the way, I got my new tetrax magnet set in today and not having any issues with the magnet at allowing necessary nor with the metal part sticking to the stock battery door. Only real issue so far is you have to slide it off just right or the battery door just pops off the nexus lol. Highly recommend though!
Sent from my A500 using Tapatalk
I'm after a car holder for my HTC One whereby I don't have to take the phone out of the case as it's annoying and I'd like something quick and easy to use.
I've bought a few from Amazon for my HTC One X but they were rubbish, flimsy or just didn't stick to the windscreen.
So I'm after some personal experiences too, has anyone bought a car holder for their One that you don't have to take it out of the case to use and does it work well?
Somewhere I can buy it from in the UK
Something like this I bought for my HOX but it just didn't work very well. Might give it a go since it's only £2.
My friends in the UK use this: http://www.amazon.co.uk/Mountek-nGr...e=UTF8&qid=1372679295&sr=8-1&keywords=Mountek
I just ordered one this morning and am expecting to receive it in a week to ten days since I am in Egypt. My friends have had it for a long time now and they tell me that it's amazing and the quality is extremely durable to this day.
Some of them also use a combination of two items: this and this. The first one has a sticky pad which is very, very strong and just doesn't fade, they tell me it's as strong as the day they bought it and they use the second item sometimes, basically they attach it to the sticky pad and use it as an actual car mount.
The second suggestion isn't the most practical but it works well and is fairly cheap, however the Mountek one is just perfect; not only did I read good reviews about it and was it recommended by friends, but I also watched videos and I find it great.
http://www.youtube.com/watch?v=kG3A4uq1ItQ
I can highly recommend this one…
http://www.mobilefun.co.uk/supergrip-universal-case-compatible-car-mount-p30552.htm
It will hold just about any phone in either portrait or landscape. Its suction pad even sticks to mottled, textured dashboard surfaces. Naturally it holds to glass like a limpet. Beware of the cheaper Amazon look-a-likes that have an inferior sucker.
It is very quick to attach and remove your phone, and doesn’t smother the phone’s back so the phone still gets air cooling (mine gets very hot charging and using sat nav). I think it looks ok too.
Thanks both, much appreciated. I'll check both of these out.
@wnp_79 - What's the pressure like on your car holder, in respect to it looks like it's spring loaded so I'm worried that it might put too much pressure on the sides of the phone, if that makes sense?
gibbs1984 said:
Thanks both, much appreciated. I'll check both of these out.
@wnp_79 - What's the pressure like on your car holder, in respect to it looks like it's spring loaded so I'm worried that it might put too much pressure on the sides of the phone, if that makes sense?
Click to expand...
Click to collapse
It is spring loaded, but does not hold the phone with any more pressure than you would use holding it yourself. The only issue I've had is with certain cases (like the Otterbox Commuter) which have protruding volume buttons. The grip is enough to accidentally activate these if you are not careful where you place the phone. With flush buttons or ensuring the grip misses them there's no issues.
wnp_79 said:
It is spring loaded, but does not hold the phone with any more pressure than you would use holding it yourself. The only issue I've had is with certain cases (like the Otterbox Commuter) which have protruding volume buttons. The grip is enough to accidentally activate these if you are not careful where you place the phone. With flush buttons or ensuring the grip misses them there's no issues.
Click to expand...
Click to collapse
Thanks, I'll add it to the possible list and I'll do some more research before pay day.
Appreciate the feedback
wnp_79 said:
I can highly recommend this one…
http://www.mobilefun.co.uk/supergrip-universal-case-compatible-car-mount-p30552.htm
It will hold just about any phone in either portrait or landscape. Its suction pad even sticks to mottled, textured dashboard surfaces. Naturally it holds to glass like a limpet. Beware of the cheaper Amazon look-a-likes that have an inferior sucker.
It is very quick to attach and remove your phone, and doesn’t smother the phone’s back so the phone still gets air cooling (mine gets very hot charging and using sat nav). I think it looks ok too.
Click to expand...
Click to collapse
Yes this one works wonderfully. I thought it a little to simple at first... But simple wins here. It'll even work with future phones. You can install and remove phone one handed and of course cases work. Only bad thing is no dedicated charging... But i got over that quick.
Kenu airframe. For me it's the best.
Sent from my HTC One using Tapatalk 4 Beta
I've been looking for the same thing. Thanks for the recommendations, I will report back once I pick one up!
Check out my video review on the Spigen Slim Armor View:
https://wwwyoutube.com/watch?v=Kqc0gUDvueU
One thing I forgot to mention in the video is the auto sleep/wake function. This allows the screen to sleep just like with regular usage. When you wake the phone using the standby button the app will still be running.
I do not have enough posts to place an external link in a thread, so you will have to put a dot after the www in the link.
It would be great if someone could post the proper link.
Here you go, embedded it for you.
Very well done review! Nice detail and the video is super clear.
mmmmBACON said:
Here you go, embedded it for you.
Very well done review! Nice detail and the video is super clear.
Click to expand...
Click to collapse
Thanks, I actually just re-uploaded it with a little bit on the Application used.
You can see it here:
https://wwwyoutube.com/watch?v=Kqc0gUDvueU
Again sorry, it would be great if you could embed the new video.
Thanks
Updated my post with your new video.
mmmmBACON said:
Updated my post with your new video.
Click to expand...
Click to collapse
Thanks
Fantastic review. Does NFC sill work?
i can confirm nfc still works
is the app downloaded from the playstore or does spigen give you a link?
freezeburn said:
is the app downloaded from the playstore or does spigen give you a link?
Click to expand...
Click to collapse
the app is on the playstore its called slim view cover and spigen is releasing there own app on 05/01
Not to dig up too old a topic, but anyone have thoughts on the new app if it actually came out? I've been holding off buying this until the Spigen app released.
Sent from my Nexus 5 using Tapatalk
Their app really really sucks. I don't know why I thought it'd be good. Mostly all of their products suck I'm kinda happy with the case but still have issues with it. Under the window its still plastic not rubber so the plastic is resting right on the screen and the front cover is really thin and it bugs me just because I can press down on it and it will touch the screen. I don't have a screen protector on it so this is a concern. Its alright but I'll definitely be looking for a new case. Hard to hold while texting and the hinge is kinda crappy. They say 360° but I don't see how they got 360 when that means a complete rotation. It flips on its back and that's only 180°. But at least it doesn't cover the camera.
Sent from my Nexus 5 using Tapatalk
Again to dig up the old topic...
but...
... no reason to start a new thread as anyone looking to buy this case should be able to find all opinions in one place.
I bought this case have extremely mixed feelings.
1, it's a great case. It fits well. The buttons require a little extra effort to push, but no big deal. Supposedly the flip cover is removable, but I haven't seen how to do it without breaking the hinge. I'm sure it can be done, but I'm afraid to push things. Definitely it makes the phone bigger and heavier, but I don't see that as a bad thing as honestly the phone is a featherweight without a case. One minor issue with the physical build, is that the bottom edge of the view window brushes the screen of the phone while closed. Being plastic, I'm sure it wouldn't affect the glass screen. However, it does appear to be starting to leave a worn spot on the screen protector of my phone after only a few weeks. Something to definitely think of if you use plastic screen protectors.
2, the software is incredibly incredibly terrible. Whether you use 3rd party or the official Spigen app, they both bite the big one. I can't review each separately because I swapped between them constantly as new problems appeared, and forgot which one had which problems. But problems included: battery usage. phone calls not answering. phone calls answering themselves. can't connect bluetooth outgoing calls without opening flip cover. randomly lists previous calls as still ongoing. Additionally, though this isn't technically software, you have to be exceedingly careful not to even get near the proximity sensor while using the phone or it will trigger the app. Even with a 2 second proximity delay, I found it was very hard especially in landscape mode (such as taking pictures) to not accidentally trigger the sensor. Also, having the light sensor covered renders auto brightness non functional.
In the end, I still use the case. But without proper software support, I'm not sure it is worth $45. I ended up just putting widgets on my homescreens on the top 1/2 of the screen so I can see them with the flip cover closed. Answering the phone requires the ol' open the flip cover deal. That's better than the terrible software.
As far as protection... considering my Nexus 4 shattered from a drop onto dirt, despite having a Ringke Hybrid Fusion installed, I was looking for better protection. It appears this offers much better protection. It has already survived a 3 foot drop, initiated by a cranky cat, from a piano to a hardwood floor. Only time will tell, of course.
If you don't mind NOT having the software support... I feel this might just be the safest your Nexus 5 can be without placing it in a firesafe filled with expanding foam.
My buddy ordered this case a while ago, loved it, then hated it. Some of you were concerned about the view window touching the screen and potentially scratching it, well it did, for him at least. He now has a dull line across the middle of his screen. Almost the whole width. This only took 2 weeks of use. Just a little FYI for those interested in this case. You'll definitely want to use a screen protector with it.
Yeah my screen got deep scratches as well I can see them on the otherwise of my now installed screen protector. Its a nice case. Terrible window. And terrible app. The Galaxy S4 view armor had glass in the case itself. I bought this because I thought it did too.
Sent from my Nexus 5 using Tapatalk
lotherius said:
Again to dig up the old topic...
but...
... no reason to start a new thread as anyone looking to buy this case should be able to find all opinions in one place.
I bought this case have extremely mixed feelings.
1, it's a great case. It fits well. The buttons require a little extra effort to push, but no big deal. Supposedly the flip cover is removable, but I haven't seen how to do it without breaking the hinge. I'm sure it can be done, but I'm afraid to push things. Definitely it makes the phone bigger and heavier, but I don't see that as a bad thing as honestly the phone is a featherweight without a case. One minor issue with the physical build, is that the bottom edge of the view window brushes the screen of the phone while closed. Being plastic, I'm sure it wouldn't affect the glass screen. However, it does appear to be starting to leave a worn spot on the screen protector of my phone after only a few weeks. Something to definitely think of if you use plastic screen protectors.
2, the software is incredibly incredibly terrible. Whether you use 3rd party or the official Spigen app, they both bite the big one. I can't review each separately because I swapped between them constantly as new problems appeared, and forgot which one had which problems. But problems included: battery usage. phone calls not answering. phone calls answering themselves. can't connect bluetooth outgoing calls without opening flip cover. randomly lists previous calls as still ongoing. Additionally, though this isn't technically software, you have to be exceedingly careful not to even get near the proximity sensor while using the phone or it will trigger the app. Even with a 2 second proximity delay, I found it was very hard especially in landscape mode (such as taking pictures) to not accidentally trigger the sensor. Also, having the light sensor covered renders auto brightness non functional.
In the end, I still use the case. But without proper software support, I'm not sure it is worth $45. I ended up just putting widgets on my homescreens on the top 1/2 of the screen so I can see them with the flip cover closed. Answering the phone requires the ol' open the flip cover deal. That's better than the terrible software.
As far as protection... considering my Nexus 4 shattered from a drop onto dirt, despite having a Ringke Hybrid Fusion installed, I was looking for better protection. It appears this offers much better protection. It has already survived a 3 foot drop, initiated by a cranky cat, from a piano to a hardwood floor. Only time will tell, of course.
If you don't mind NOT having the software support... I feel this might just be the safest your Nexus 5 can be without placing it in a firesafe filled with expanding foam.
Click to expand...
Click to collapse
I have bombed spigen's email with complaints and they do not even bother to reply - it's such a shame that a company would make a great case, with promises of a functioning app and not follow through. My brother (note 3) and my gf (S4) BOTH bought this case on my recommendation and they love it bc it just works. I know it's different bc we dont have the magnets to trigger the innerworkings but sheesh just give us something relatively useful and it would be okay.
AceKingNYC said:
I have bombed spigen's email with complaints and they do not even bother to reply - it's such a shame that a company would make a great case, with promises of a functioning app and not follow through. My brother (note 3) and my gf (S4) BOTH bought this case on my recommendation and they love it bc it just works. I know it's different bc we dont have the magnets to trigger the innerworkings but sheesh just give us something relatively useful and it would be okay.
Click to expand...
Click to collapse
I'd be willing to give a little pass on the proximity sensor issues if those were the ONLY issues.
Sooo, spigen supplys the case but no app?
Or does anyone have more info then that, i ordered the case before i read up on it in here... and now i have it laying on my desk and i am not sure if i sould unpack it or not.
Without the app the window is pointless... and i could have ordered the slim armor instead and saved a few bucks ...
but i really liked the idea of having my screen protected by a secon layer of defense .. first one is obviously a screen foil ...
can anyone confirm that the app is really missing or am i just to stupid to use the search function?
Onecton said:
Sooo, spigen supplys the case but no app?
Or does anyone have more info then that, i ordered the case before i read up on it in here... and now i have it laying on my desk and i am not sure if i sould unpack it or not.
Without the app the window is pointless... and i could have ordered the slim armor instead and saved a few bucks ...
but i really liked the idea of having my screen protected by a secon layer of defense .. first one is obviously a screen foil ...
can anyone confirm that the app is really missing or am i just to stupid to use the search function?
Click to expand...
Click to collapse
The app is in the PlayStore. I just watched a video on it as I'm looking for a case for mine. They'll have a QR code on the instructions.
They do provide an app - but the app is terrible.
lotherius said:
They do provide an app - but the app is terrible.
Click to expand...
Click to collapse
Have they not updated it since release of this case?