Hey guys,
I've been prowling around these sectors ever since I got my Xoom, searching for the perfect case.
What I wanted:
The flexibility of the Zoogue case really appealed to me - I like the idea of being able to choose the angle of viewing. I also wanted any case to be able to be able to provide a setting for only a slight tilt when I wanted to type.
BUT the high price tag really put me off.
Also, I wanted it to be pretty thin. The Xoom is big enough without me adding to its bulk.
After much searching, I think I found the perfect one, so I thought I'd share my experiences (Here's the link where I bought it from: http://www.ebay.com.au/itm/Black-Fo...Accessories&hash=item3f0a05cb28#ht_3816wt_947)
Firstly, the price tag attached to this thing is ridiculously awesome. At first, I bought it thinking 'why not? it's less than $25!', but the product turned out to be even more awesome.
Firstly, it's really thin, but covers the tablet nicely. Secondly, to a certain extent, you can also choose what viewing angle you want, which is awesome. I say to a certain extent, because after a while, you run out of cover to stick the velcro on (have a look at the attached picture)
All the cutouts are there, but you can't charge with the case closed. I don't think this is a problem, because the cover folds back on itself nicely, so you can keep it open to charge. Which brings me to the next plus: it's designed so that it folds back on itself and it's actually pretty comfortable to hold in portrait mode (I've heard that this isn't the case with the official Moto one).
The only minor flaw I've found is that on mine, the top left corner is slightly higher than the top right - what this means is that the front-facing camera is covered ever so slightly by the strip of leather running under it. The picture I attached kind of exaggerates it a bit; it's not that bad. When I booted up the front-facing camera, there's just a line across the very bottom of the image. I'm not sure if this is on all their cases, so it might just be mine.
One more note: When I first heard about cases using velcro, I immediately wondered if the velcro would wear out over time, like in some of my bags. If you're also wondering that, then don't worry! This doesn't use the traditional velcro. You know how traditionally, the fuzzy part has all the loops and the the other part would like... 'hook' onto it and that's how it stuck? Well, this uses a different sort... one that looks like it won't wear out easily. Also, this case is pretty damn sturdy when you've got it propped up. I've tested this out extensively, and even when poking at the screen with a fair bit of force, it never topples.
Finally, before anyone asks: no, I'm not in any way affiliated with the seller, I'm just one super-happy customer. Even though it says it's free shipping, they still provided tracking for me. They even took a picture of the package before they sent it off and sent that to me, which was an eBay first. Plus, the person dealing with the emails just seems really nice, based on the correspondences I've had.
So pretty much, this case is amazing (for me, anyway). I don't think it's real leather, but for under $25, I wasn't expecting it. Plus, real leather is a ***** to take care of, anyway. Whether you need this case will probably come down to what you want out of a case, but this one has been pretty versatile for me (I've had it for about a month now).
EDIT: I didn't realise how much I wrote.... can you tell I'm procrastinating?
EDIT2: I forgot to add that there's even a magnet that holds the cover closed. It's not too strong but not too weak, either. Quite nifty, actually!
screen
is the screen filtered
wyllem said:
is the screen filtered
Click to expand...
Click to collapse
Nope, there's nothing on the screen area at all. That's my matte screen protector that I bought off eBay. It was the cheapest one I could find and it actually works quite well!
i got this one. will post pics and give feedback as soon as i got it.
Well, I really like it myself, so it'll be interesting to hear feedback from other people too.
And daaaang it, it's on sale now (I hate when things go on sale after I buy it!) Oh well, it was already cheap to begin with
Related
Just a very quick review of my Easecase E5 which arrived about a week ago.
You can see pictures of it by search eBay for "Easecase E5 galaxy note" (without quotes), there's one here : http://www.ebay.co.uk/itm/E5-EASECA..._MobilePhonesCasesPouches&hash=item5ae4059699
(I did get a bit of a shock when I saw that - that is my actual one - with my name on it, I was just searching for one at random)
Delivery time:
As mentioned in other parts of this forum, delivery times for Easecase are pretty woeful. I ordered on the 25th of November and, it arrived here a few days over a month later in Sweden. The problem seems to be largely that they ship via China Post which is quit slow - they dispatched it (with trackable* shipping) within about a week. I bought it through eBay, so I am not sure if they have another outlet, and, they make it very clear on their eBay items that they will take a looong time to ship, so, I can't take any points off them there.
Build quality:
It is beautifully put together. There's a slot running down the inner spine for the stylus, and my name is embossed on the front. I would characterise it as high quality.
Outside:
I opted for the magnetic clasp. It isn't a very strong magnet, but does the job.
Apart from the clasp, there's just the embossing on the outside, and, a neat seam around the edge.
Inside:
There are 2 bill pockets inside, both of which are *very* deep. They're about as deep as the note is high.
When it is fully opened, there are 5 credit card pockets on the left. Note that these seem to be individual pockets, separated from each other internally. Cards fit vertically into these pockets. The front of the pockets stretches a bit over 2 thirds of the way from the far left of the case to the spine. Behind the pockets is a sleeve about 1/3 wider than the short side of a credit card where you could fold bank notes* (remember this, I'll come back to it.
As I said, along the inner spine is slot for the stylus.
On the right is where the not goes. It slots in (quite snugly) from the top. The top is open, so you can get to the headphone port. There's a hole in the left for the volume control, a hole in the right for the power button, and, a hole in the bottom for access to the USB port.
Looking at the front, the home and hardware buttons are all accessible as part of the screen area. They've also neatly cut out around the top speaker and, the front camera.
Protection:
Very good. If the magnetic clasp doesn't come undone during a fall, then, it'd be very hard to break the screen. It is nice thick leather, and you might even be able to drop a brick on it when closed without breaking the screen.
It still won't help you if you drop it in the toilet as some poor chap here has apparently done.
Usage:
It is very bulky. Like one of those filofax jobs people used to (still?) have.
I'm used to big gadgets, so I cope, but you wouldn't get it into tight jeans pockets. I do squeeze it, with some discomfort into my front trousers pocket.
You don't want to talk on the phone with the cover on for more than brief calls, you look like an idiot. Most of the time I pull it out of the cover for calls, or, use a bluetooth headset.
Using the rear camera requires removing from the cover.
General browsing/emailing etc is fine with the cover on.
Fortunately removing the phone is a fairly quick procedure, as is putting it back it. I imagine it'll get easier still as the leather stretches a touch.
One annoyance is, as the leather reaches right to the top of the touch screen, if the phone slips up slightly, it can be difficult or impossible to pull down the notifications bar. When in landscape, this isn't an issue as the phone can't move left/right in the case.
Summary/thoughts:
I wish I'd bought the one without the bank note pockets. That'd reduce the bulk considerably and you could still stick notes behind your cards (see * above). You can also use the rear facing camera with the non-bank note version (E4).
On balance, I am pleased I bought it though, it is of high quality and, it is great having your phone and wallet all in the one thing - it also means you can ring your wallet to find it when you are in a hurry to head to work
If anyone has any questions, I'd be happy to answer them.
My recommendation for anyone thinking of getting one of these is to get the E4 and not this.
They don't seem to have any E4's on eBay at the moment for the note, but I am sure I have seen one there. Here's one for the Desire HD - I am sure it gets the point across.
http://www.ebay.co.uk/itm/E4-EASECA...sesPouches&hash=item5647be7cbf#ht_5657wt_1016
Cheers,
Kent
kentmartin said:
You don't want to talk on the phone with the cover on for more than brief calls, you look like an idiot. Most of the time I pull it out of the cover for calls, or, use a bluetooth headset.
One annoyance is, as the leather reaches right to the top of the touch screen, if the phone slips up slightly, it can be difficult or impossible to pull down the notifications bar. When in landscape, this isn't an issue as the phone can't move left/right in the case.
Click to expand...
Click to collapse
Two quick thoughts:
1) When calling, can't you fold the case cover back 180 degrees?
2) Some launchers (adwlauncher does this) allow to swipe down anywhere to lower the notification bar, so you don't need to touch the very top.
- Frank
ChodTheWacko said:
Two quick thoughts:
1) When calling, can't you fold the case cover back 180 degrees?
Click to expand...
Click to collapse
No, the banknotes pockets kind of open so it gets more bulky and wants to spring back to about 180 degrees (where 0 is closed, 180 is wide open and 360 is the position you suggest), but I suspect you could with the E4 model.
2) Some launchers (adwlauncher does this) allow to swipe down anywhere to lower the notification bar, so you don't need to touch the very top.
Click to expand...
Click to collapse
Yes - I read about that setting a while back, but have never used it, thanks for reminding me - it is now enabled for the swipe down gesture (hide dock was annoying me anyway).
Hi, thanks for the review, i've been stuck deciding between the E5 and the E4, due to the E5 having the bill slot, which i would think is really good compared to folding the bills under the cards.
Can you take a picture of the case when it's fully loaded, both open and closed?
e.g. all card slots used, and the bills folded and slotted under the cards
That would probably help sway my decision, if that slot + cards do not bulk up the entire wallet.
More info // pics in my thread. http://forum.xda-developers.com/showthread.php?t=1419678
I love those case, but it's sucks when they cost so much!
It's should be 10$ max.
peanuts and monkeys
i hope to order this case by the end of this month, i've emailed them some questions on customisation, hopefully it's permitted, then can go forward with this.
the E5 with wallet style slot is definitely too bulky. I bought one for my Desire HD with modified size to fit the DHD with Otterbox. After receiving it, tested once with DHD and sit in my drawer collecting dust ever since.
EvoFighter said:
the E5 with wallet style slot is definitely too bulky. I bought one for my Desire HD with modified size to fit the DHD with Otterbox. After receiving it, tested once with DHD and sit in my drawer collecting dust ever since.
Click to expand...
Click to collapse
Ya know I thought the same thing at first, but I just got a pack of 3 extra batteries and I find I can put two of em in the wallet and also a cleaning cloth and everything fits great.
In terms of customizations I wonder if a small bit for some change could be added.
Its beautiful.
Easecase E5 looks good.
This is a genuine leather case, and very good quality construction. They also responded well to my customization request (I wanted a 65mm horizontal belt loop added to mine).
Only $10 max is out of the question. Worth 3 to 4 times that much. It includes branding of your own name as well. It's a very classy leather case/wallet.
Could you please share a photo were the Note is next to the case just to compare the size of the case?
Hey great review. I really love the customization of these cases and I recently bought a galaxy note us version from ATT so ive been doing some research for a quality wallet type case for my note (will arrive monday) I was just wondering, would this case or the E4 case which is what ill probably get be fine for the american ATT version. Im pretty sure the dimensions are about the same but im not so sure about the button placements or the charger placements.
The only thing I dont like is the shipping time but not much I can do about it but this case seems to be the best so far that ive found besides the vintage leather case but those dont come in black and have magnetic strips.
Any reply would be appreciated.
So just to recap - will my US ATT galaxy Note i717 be a good match with this case?
dreamstealer2045 said:
Hey great review. I really love the customization of these cases and I recently bought a galaxy note us version from ATT so ive been doing some research for a quality wallet type case for my note (will arrive monday) I was just wondering, would this case or the E4 case which is what ill probably get be fine for the american ATT version. Im pretty sure the dimensions are about the same but im not so sure about the button placements or the charger placements.
The only thing I dont like is the shipping time but not much I can do about it but this case seems to be the best so far that ive found besides the vintage leather case but those dont come in black and have magnetic strips.
Any reply would be appreciated.
So just to recap - will my US ATT galaxy Note i717 be a good match with this case?
Click to expand...
Click to collapse
When I dealt with them, I found them quite responsive, I suggest asking them if it'll fit the i717 - odds on if it doesn't they'll have one that does even if they haven't advertised it yet.
Although I haven't seen it, I'd definitely recommend the E4 over the E5 - I find I don't really need the slots for notes (you can slip folded notes in the bit behind where credit cards go anyway) and, it the banknote pockets block the camera (by necessity) which drives me a bit mad.
definitely not slim, and not cheap, but I've been very happy with this case for my N7-2012.
http://www.thesnugg.com/tablet-case...ather-case-cover-and-flip-stand-in-black.aspx
Will post once I get mine (pre-orders claim to ship Aug 23).
I got my Snugg case today...
what I like: they moved the loop for the stylus (not that I use it) away from blocking the USB port (as it did on the N7 2012 version of the case).
But alas, the case I got is a big fail. Open the case, the N7 turns on.. as you expect... and then when you finish folding the cover back behind the N7... that same magnet has enough pull to turn the N7 right back off
all you have to do is fold the cover back behind and slide it back and forth a little. I never had this problem with my N7(2012)+Snugg.
So I'm returning my case. Maybe they'll get the kinks worked out in a future batch.
EDIT: similar to the 2012 case, I do wish they made it a bit easier to reach the power/volume buttons.. the cut-out on the Poetic slimline is MUCH better for that.
EDIT2: Snugg is sending a replacement.. we'll see if its any better.
EDIT3: the comedy continues.. the replacement they sent was a red iPad case... not much good that will do... have emailed them again and waiting to hear back.
Got my replacement case.. same issue.... so I decided to do a little surgery...
I removed the stitching from 3 of the 4 sides around the tan Snugg logo, and peeled it back. Under that was a layer of light brown tape/paper.. I used a nife to scrape that back, and under that was a magnet which resembles a button battery... maybe 2/3 the diameter of a dime (US).
I used 2 pair of pliers to attempt to snap it in half.. it was fairly brittle, do I ended up with 4 pieces of different sizes.. I 1st tried the largest piece.. maybe ~50% of the original magnet... put it back in place, piece of electrical tape over, and tucked the logo back in place... still saw the problem.
So then I swapped that piece for the 2nd largest (maybe 1/4 of the original magnet).. and so far that seems to be doing the trick. Seems to open reliably from the front, and is NOT detected (knock wood) when the cover is folded to the rear.
I'll give it a few more days, then add some glue to secure the stitching I removed and call it a win.
I've emailed Snugg about this, but so far they are saying "we haven't had any other complaints".. I dunno, since I got one of the 1st cases they made for N7v2, I think that is a premature assessment on their part.
At this point, I hope I have the case I wanted.
RickySmith said:
Well Snugg is a nice case but I dont like that stylus space there...because I dont like to use stylus and more over that space will be more irritating one rather than being useful.....on comparison it with black leather portfolio case...i find that portfolio one is much better...as A case or a cover is a product that should be for the care of tab properly so i prefer that one over snugg...almost same price..but quality of leather portfolio case is much better...but its my personal experience i would say.....
Thanks....
Click to expand...
Click to collapse
The stylus loop was at the bottom, blocking the USB port on their case for N7-2012.. they moved it to the top for N7-2013 (so it doesn't block anything now).. I don't use a stylus either, but it stays out of the way for me.
Snugg replied to my email, saying they have now gotten other complaints and are making an adjustment to the magnets in the case. Will be sending a revised case once it is ready.
RickySmith said:
Well Snugg is a nice case but I dont like that stylus space there...because I dont like to use stylus and more over that space will be more irritating one rather than being useful.....on comparison it with black leather portfolio case...i find that portfolio one is much better...as A case or a cover is a product that should be for the care of tab properly so i prefer that one over snugg...almost same price..but quality of leather portfolio case is much better...but its my personal experience i would say.....
Thanks....
Click to expand...
Click to collapse
took a look at the link... I had a case like that for my Touchpad.. never again... I much prefer the Snugg style/functionality... I've had the N7-2012 version for almost a year.. zero fraying... it still is like-new. 2 others in the family have Snugg cases for different tablets, and they've had no issues either. *Other* than this current magnet issue (allegedly being fixed in a new batch of cases), I've seen nothing to suggest Snugg cases are anything but top quality, equal or better than any other "leather" case I've owned over the span of several tablets.
but the nice thing about this is that everyone likes a different style case, and there's something out there for just about everyone at every price point.
I got my rev2 case.. they did more than just fix the magnet... the inside cut-outs are different, and most importantly, they did a carve out around the power and volume buttons, making those much more accessible.
Oh, and by dumb luck, I figured out that the stylus loop can easily tuck in behind your N7, so it's totally out of the way (even tho it didn't bother me anyway).
and the magnet strength seems fixed now.
All in all I can now call this a very good case.
zim2dive said:
I got my rev2 case.. they did more than just fix the magnet... the inside cut-outs are different, and most importantly, they did a carve out around the power and volume buttons, making those much more accessible.
Oh, and by dumb luck, I figured out that the stylus loop can easily tuck in behind your N7, so it's totally out of the way (even tho it didn't bother me anyway).
and the magnet strength seems fixed now.
All in all I can now call this a very good case.
Click to expand...
Click to collapse
Just saw the update on the rev2 case, right after I got done talking to Snugg. The lady at first hesitated, checked with her supervisor then came back. Said they had similar issues and it was fixed, new cases would be aent out to thoae affected meaning you muat first complain to get a replacement. My issues were bad fit, camera slightly blocked front and back. Buttons impossible to find, edge was curled badly, left aide of screen slightly covered, and just now typing this response my magnet kicked my screen off! Just goto Snugg's website and click the chat link they will send out a case once they verify your order number with them or amazon. Glad to hear the updated case looks more like the picture on their website. Waiting for mine now.
jusfartinaround said:
Just saw the update on the rev2 case, right after I got done talking to Snugg. The lady at first hesitated, checked with her supervisor then came back. Said they had similar issues and it was fixed, new cases would be aent out to thoae affected meaning you muat first complain to get a replacement. My issues were bad fit, camera slightly blocked front and back. Buttons impossible to find, edge was curled badly, left aide of screen slightly covered, and just now typing this response my magnet kicked my screen off! Just goto Snugg's website and click the chat link they will send out a case once they verify your order number with them or amazon. Glad to hear the updated case looks more like the picture on their website. Waiting for mine now.
Click to expand...
Click to collapse
hmm.. just looked at the website.. their pic looks like the original rev for N7-2013... the one I got has cutouts above and below the screen ~3/4 the width of the display... vs. their pic show just a cutout for the front facing camera.
EDIT: FWIW I have NO idea why the new cutouts above/below the screen were done this way. the other changes they made, make sense to me.
OMG, what the crap case!
Check out my video review on the Spigen Slim Armor View:
https://wwwyoutube.com/watch?v=Kqc0gUDvueU
One thing I forgot to mention in the video is the auto sleep/wake function. This allows the screen to sleep just like with regular usage. When you wake the phone using the standby button the app will still be running.
I do not have enough posts to place an external link in a thread, so you will have to put a dot after the www in the link.
It would be great if someone could post the proper link.
Here you go, embedded it for you.
Very well done review! Nice detail and the video is super clear.
mmmmBACON said:
Here you go, embedded it for you.
Very well done review! Nice detail and the video is super clear.
Click to expand...
Click to collapse
Thanks, I actually just re-uploaded it with a little bit on the Application used.
You can see it here:
https://wwwyoutube.com/watch?v=Kqc0gUDvueU
Again sorry, it would be great if you could embed the new video.
Thanks
Updated my post with your new video.
mmmmBACON said:
Updated my post with your new video.
Click to expand...
Click to collapse
Thanks
Fantastic review. Does NFC sill work?
i can confirm nfc still works
is the app downloaded from the playstore or does spigen give you a link?
freezeburn said:
is the app downloaded from the playstore or does spigen give you a link?
Click to expand...
Click to collapse
the app is on the playstore its called slim view cover and spigen is releasing there own app on 05/01
Not to dig up too old a topic, but anyone have thoughts on the new app if it actually came out? I've been holding off buying this until the Spigen app released.
Sent from my Nexus 5 using Tapatalk
Their app really really sucks. I don't know why I thought it'd be good. Mostly all of their products suck I'm kinda happy with the case but still have issues with it. Under the window its still plastic not rubber so the plastic is resting right on the screen and the front cover is really thin and it bugs me just because I can press down on it and it will touch the screen. I don't have a screen protector on it so this is a concern. Its alright but I'll definitely be looking for a new case. Hard to hold while texting and the hinge is kinda crappy. They say 360° but I don't see how they got 360 when that means a complete rotation. It flips on its back and that's only 180°. But at least it doesn't cover the camera.
Sent from my Nexus 5 using Tapatalk
Again to dig up the old topic...
but...
... no reason to start a new thread as anyone looking to buy this case should be able to find all opinions in one place.
I bought this case have extremely mixed feelings.
1, it's a great case. It fits well. The buttons require a little extra effort to push, but no big deal. Supposedly the flip cover is removable, but I haven't seen how to do it without breaking the hinge. I'm sure it can be done, but I'm afraid to push things. Definitely it makes the phone bigger and heavier, but I don't see that as a bad thing as honestly the phone is a featherweight without a case. One minor issue with the physical build, is that the bottom edge of the view window brushes the screen of the phone while closed. Being plastic, I'm sure it wouldn't affect the glass screen. However, it does appear to be starting to leave a worn spot on the screen protector of my phone after only a few weeks. Something to definitely think of if you use plastic screen protectors.
2, the software is incredibly incredibly terrible. Whether you use 3rd party or the official Spigen app, they both bite the big one. I can't review each separately because I swapped between them constantly as new problems appeared, and forgot which one had which problems. But problems included: battery usage. phone calls not answering. phone calls answering themselves. can't connect bluetooth outgoing calls without opening flip cover. randomly lists previous calls as still ongoing. Additionally, though this isn't technically software, you have to be exceedingly careful not to even get near the proximity sensor while using the phone or it will trigger the app. Even with a 2 second proximity delay, I found it was very hard especially in landscape mode (such as taking pictures) to not accidentally trigger the sensor. Also, having the light sensor covered renders auto brightness non functional.
In the end, I still use the case. But without proper software support, I'm not sure it is worth $45. I ended up just putting widgets on my homescreens on the top 1/2 of the screen so I can see them with the flip cover closed. Answering the phone requires the ol' open the flip cover deal. That's better than the terrible software.
As far as protection... considering my Nexus 4 shattered from a drop onto dirt, despite having a Ringke Hybrid Fusion installed, I was looking for better protection. It appears this offers much better protection. It has already survived a 3 foot drop, initiated by a cranky cat, from a piano to a hardwood floor. Only time will tell, of course.
If you don't mind NOT having the software support... I feel this might just be the safest your Nexus 5 can be without placing it in a firesafe filled with expanding foam.
My buddy ordered this case a while ago, loved it, then hated it. Some of you were concerned about the view window touching the screen and potentially scratching it, well it did, for him at least. He now has a dull line across the middle of his screen. Almost the whole width. This only took 2 weeks of use. Just a little FYI for those interested in this case. You'll definitely want to use a screen protector with it.
Yeah my screen got deep scratches as well I can see them on the otherwise of my now installed screen protector. Its a nice case. Terrible window. And terrible app. The Galaxy S4 view armor had glass in the case itself. I bought this because I thought it did too.
Sent from my Nexus 5 using Tapatalk
lotherius said:
Again to dig up the old topic...
but...
... no reason to start a new thread as anyone looking to buy this case should be able to find all opinions in one place.
I bought this case have extremely mixed feelings.
1, it's a great case. It fits well. The buttons require a little extra effort to push, but no big deal. Supposedly the flip cover is removable, but I haven't seen how to do it without breaking the hinge. I'm sure it can be done, but I'm afraid to push things. Definitely it makes the phone bigger and heavier, but I don't see that as a bad thing as honestly the phone is a featherweight without a case. One minor issue with the physical build, is that the bottom edge of the view window brushes the screen of the phone while closed. Being plastic, I'm sure it wouldn't affect the glass screen. However, it does appear to be starting to leave a worn spot on the screen protector of my phone after only a few weeks. Something to definitely think of if you use plastic screen protectors.
2, the software is incredibly incredibly terrible. Whether you use 3rd party or the official Spigen app, they both bite the big one. I can't review each separately because I swapped between them constantly as new problems appeared, and forgot which one had which problems. But problems included: battery usage. phone calls not answering. phone calls answering themselves. can't connect bluetooth outgoing calls without opening flip cover. randomly lists previous calls as still ongoing. Additionally, though this isn't technically software, you have to be exceedingly careful not to even get near the proximity sensor while using the phone or it will trigger the app. Even with a 2 second proximity delay, I found it was very hard especially in landscape mode (such as taking pictures) to not accidentally trigger the sensor. Also, having the light sensor covered renders auto brightness non functional.
In the end, I still use the case. But without proper software support, I'm not sure it is worth $45. I ended up just putting widgets on my homescreens on the top 1/2 of the screen so I can see them with the flip cover closed. Answering the phone requires the ol' open the flip cover deal. That's better than the terrible software.
As far as protection... considering my Nexus 4 shattered from a drop onto dirt, despite having a Ringke Hybrid Fusion installed, I was looking for better protection. It appears this offers much better protection. It has already survived a 3 foot drop, initiated by a cranky cat, from a piano to a hardwood floor. Only time will tell, of course.
If you don't mind NOT having the software support... I feel this might just be the safest your Nexus 5 can be without placing it in a firesafe filled with expanding foam.
Click to expand...
Click to collapse
I have bombed spigen's email with complaints and they do not even bother to reply - it's such a shame that a company would make a great case, with promises of a functioning app and not follow through. My brother (note 3) and my gf (S4) BOTH bought this case on my recommendation and they love it bc it just works. I know it's different bc we dont have the magnets to trigger the innerworkings but sheesh just give us something relatively useful and it would be okay.
AceKingNYC said:
I have bombed spigen's email with complaints and they do not even bother to reply - it's such a shame that a company would make a great case, with promises of a functioning app and not follow through. My brother (note 3) and my gf (S4) BOTH bought this case on my recommendation and they love it bc it just works. I know it's different bc we dont have the magnets to trigger the innerworkings but sheesh just give us something relatively useful and it would be okay.
Click to expand...
Click to collapse
I'd be willing to give a little pass on the proximity sensor issues if those were the ONLY issues.
Sooo, spigen supplys the case but no app?
Or does anyone have more info then that, i ordered the case before i read up on it in here... and now i have it laying on my desk and i am not sure if i sould unpack it or not.
Without the app the window is pointless... and i could have ordered the slim armor instead and saved a few bucks ...
but i really liked the idea of having my screen protected by a secon layer of defense .. first one is obviously a screen foil ...
can anyone confirm that the app is really missing or am i just to stupid to use the search function?
Onecton said:
Sooo, spigen supplys the case but no app?
Or does anyone have more info then that, i ordered the case before i read up on it in here... and now i have it laying on my desk and i am not sure if i sould unpack it or not.
Without the app the window is pointless... and i could have ordered the slim armor instead and saved a few bucks ...
but i really liked the idea of having my screen protected by a secon layer of defense .. first one is obviously a screen foil ...
can anyone confirm that the app is really missing or am i just to stupid to use the search function?
Click to expand...
Click to collapse
The app is in the PlayStore. I just watched a video on it as I'm looking for a case for mine. They'll have a QR code on the instructions.
They do provide an app - but the app is terrible.
lotherius said:
They do provide an app - but the app is terrible.
Click to expand...
Click to collapse
Have they not updated it since release of this case?
I received my my SCR26 cover from Clove yesterday. Preordered almost 2 months ago, because I thought it looked pretty nice. I was quite satisfied with my Dot View case from my HTC M8, and I would have liked a similar experience from Sony.
First of all the display area in the front was nicked. It was protected on both sides by a peel-off plastic , but somehow it had gotten nicked.
Secondly, there was a snap lock on the side that fastens on the back. I can see that it's shown on the Sony site now, but I am fairly certain that it wasn't a while back. It certainly isn't shown on Clove's product page. It pretty much ruins the cover for me having to unsnap the clasp to open the case. Also: way ugly
So the phone cannot lie flat on its back when the cover is on and closed (or open for that matter). I'm returning mine and suggested that Clove change their product page to reflect the actual product.
That aside, I wasn't terribly impressed with the "style view window". It's nifty being able to take pictures without opening the case as well as skipping tracks and play/pausing, but there is, as far as I can tell, no way to view your notifications other than simply acknowledging that they are there, forcing you to open the case to see what they are.
The phone adheres to the back of the case on a sticky surface, but I can see that being problematic, if it is removed and re-inserted over time.
I wasn't terribly impressed, but then again my opinion was somewhat colored by the presence of the clasp from the get-go.
I knew that this case could be somewhat disappointing
Would you mind providing some other pictures of the case?
I was almost itching to buy this case for a very long time... Since the wait was endless, I finally took the plunge and bought a Ringke Fusion case.. after reading this review I think I made a good choice after all..
I'm kind of feeling the same way as you after getting mine today after over 2 months of waiting on it ......
Skickat från min LG-V500 via Tapatalk
Could you take some pictures of it? I'm interested in getting this cover and want to see the problem and how's the cover made myself.
Sent with my Sony Xperia Z3 Compact with Tapatalk Pro
At work right now, will see what I can do when I get home.
Same here, received after 2 month and really disappointed. Build quality is awfull but the worst is that snap lock on the side, it feels like opening a purse . Oh and also the sticky part to attached the phone at the back, how long is that going to last if I decide to use the phone witout the case. Really Sony, is that all you could do for that great phone!!?
I sent it straight back to amazon as the picture was different from the product. Now looking for a new case.
Paninno12 said:
Same here, received after 2 month and really disappointed. Build quality is awfull but the worst is that snap lock on the side, it feels like opening a purse . Oh and also the sticky part to attached the phone at the back, how long is that going to last if I decide to use the phone witout the case. Really Sony, is that all you could do for that great phone!!?
I sent it straight back to amazon as the picture was different from the product. Now looking for a new case.
Click to expand...
Click to collapse
the adhesive part will be restore just with a wipe of wet damp cloth
Thanks for the heads up.
It was already reported in this forum that this case wasn't the best one.
Hope you'll find the one you really like
I have had this cover for a good few months now. And it is falling apart... so also in the long term. ****ty cover.
note to self, never buy this cover. :s
Hey!
Not a fan of cases, skins, or the like?
I have stumbled upon the best thing that fits inside the lump that protrudes from our lovely Nexus 5X's.
Paper Reinforcement Labels.
Those things we used once a long time in middle school now have a awesome purpose!
They fit inside the white lip perfectly and circle the camera module with grace.
When you stack three or more it creates a nice resting place for your phone.
Enjoy this little tip!
Let me know if you works for you!
Picture Attached!
-Romanpower
Somewhere out there, an industrial designer is weeping... (No disrespect, if you're this concerned about protecting that area than there must be others that feel the same way.)
One would hope that it was designed to be durable from its inception, since it's quite clear that this area will likely receive many impacts over the course of the device's life, whenever the phone is put down without caution.
I hope Spigen produce one.
redneck engineering.
ohussain said:
Somewhere out there, an industrial designer is weeping... (No disrespect, if you're this concerned about protecting that area than there must be others that feel the same way.)
One would hope that it was designed to be durable from its inception, since it's quite clear that this area will likely receive many impacts over the course of the device's life, whenever the phone is put down without caution.
Click to expand...
Click to collapse
The fear is real. Really hoping that one was a freak accident. Ringke Slim case, apparently.
PhoenixTank said:
The fear is real. Really hoping that one was a freak accident. Ringke Slim case, apparently.
Click to expand...
Click to collapse
I've been on the fence about returning mine because I've been wary about how much protection it provides. Looks like I have the answer to the question I already knew.
PhoenixTank said:
The fear is real. Really hoping that one was a freak accident. Ringke Slim case, apparently.
Click to expand...
Click to collapse
Wow. I certainly hope you're right and this was just a freak accident. According to the thread on reddit, it only dropped about 1m, from a table onto the floor...
This is just one report (albeit a concerning one) - and it's still far too early to gauge if there is an issue here. At this time all we can do is wait and see (and try not to drop our phones).
On the subject of cases, bumpers, etc. I'm with the minority of those who go without - I like to use the device as it was designed. While I can appreciate the protective benefits a casing may offer, it's always visually apparent when there's a case on, (even the clearest/thinnest ones), and there is always some increase in size when it comes to handling, no matter how minimal. With the elephantine devices we have today, the 'bare' phones are big enough already. The 5X should have had much smaller top & bottom bezels, there's no need for it to be this tall. I wouldn't resent the large phones so much, but there are very few, if any, decent options for those of us who prefer smaller (around 5.2") phones.
I do use pouches/sleeves, but of course the phones are exposed when I'm actually using them, or if they're sitting on a table outside of their pouch. Over the course of a few years, I have accidentally dropped my phones a few times (Galaxy Nexus & Oneplus One, not the 5X thus far), and they have never received anything more than a few scuffs & minor scratches, of course their camera housings didn't protrude as far as that of the 5X.
Personally, I won't be concerned about the durability of the camera or the device in general until it's clear that there's an issue.