Develop Bugs

Serious Problem here guys...

So i downloaded WM6 Black 2.0, and its constantly crashing, so i wanted to re-install it and see if that helped.
now whenever i try to launch the file, i get an error message that states
"custom RUU has encountered a problem and needs to close. we are sorry for the inconvenience."
So im wondering what changed that wont allow me to run the ruu file? Im kinda freaking out here because i need to get my phone working! its constantly crashing on me!
i hope someone knows a fix for this, i tried to search but came up with nothing

newnoise1024 said:
So i downloaded WM6 Black 2.0, and its constantly crashing, so i wanted to re-install it and see if that helped.
now whenever i try to launch the file, i get an error message that states
"custom RUU has encountered a problem and needs to close. we are sorry for the inconvenience."
So im wondering what changed that wont allow me to run the ruu file? Im kinda freaking out here because i need to get my phone working! its constantly crashing on me!
i hope someone knows a fix for this, i tried to search but came up with nothing
Click to expand...
Click to collapse
Looks like a problem on your PC... (I mena for the Customruu crashing)

newnoise1024 said:
So i downloaded WM6 Black 2.0, and its constantly crashing, so i wanted to re-install it and see if that helped.
now whenever i try to launch the file, i get an error message that states
"custom RUU has encountered a problem and needs to close. we are sorry for the inconvenience."
So im wondering what changed that wont allow me to run the ruu file? Im kinda freaking out here because i need to get my phone working! its constantly crashing on me!
i hope someone knows a fix for this, i tried to search but came up with nothing
Click to expand...
Click to collapse
Had this happen to me. I downloaded .net framework 3.0 from the M$ site and then it worked fine.
Maybe that will help you.
Jim

Need more info?
newnoise1024 said:
So i downloaded WM6 Black 2.0, and its constantly crashing, so i wanted to re-install it and see if that helped.
now whenever i try to launch the file, i get an error message that states
"custom RUU has encountered a problem and needs to close. we are sorry for the inconvenience."
So im wondering what changed that wont allow me to run the ruu file? Im kinda freaking out here because i need to get my phone working! its constantly crashing on me!
i hope someone knows a fix for this, i tried to search but came up with nothing
Click to expand...
Click to collapse
Ok, first off, this is not a flame. It's an education, ok?
When posting a problem, it's best practice to let us know your:
Model of phone
Radio version
Boot Loader version
OS on your PC
ActiveSync version (s/b 4.5 by now)
Then, and only then, will you be able to get some intelligent answers. You also need to follow the link in my signature and there you will find answers.
If you're still stuck, usually re-downloading the RUU will result in a working ROM patch, unless you have other PC issues. You really need to fix that first, and the guides posted here are FULL of the diagnostic and troubleshooting steps that will propel you to a successful resolution.
Please read those posts, add your info, and you may be extremely pleased with the results.
Good reading!

newnoise1024 said:
So i downloaded WM6 Black 2.0, and its constantly crashing, so i wanted to re-install it and see if that helped.
now whenever i try to launch the file, i get an error message that states
"custom RUU has encountered a problem and needs to close. we are sorry for the inconvenience."
So im wondering what changed that wont allow me to run the ruu file? Im kinda freaking out here because i need to get my phone working! its constantly crashing on me!
i hope someone knows a fix for this, i tried to search but came up with nothing
Click to expand...
Click to collapse
First off; relax. At least the problem isn't with your phone. It's a heck of a lot easier to fix a PC.
I assume you've already tried to re-download the file?
Did you completely reboot your PC? Shut it down to power down, then restart. Make sure you don't have any extra USB stuff plugged in (like cameras, etc). If you have a PS/2 mouse and KB, use those, and not USB versions. One trick is to have the USB bus on your computer completely empty except for your phone.
Head over to Microsoft's site and download a fresh version of Compact Framework .NET (3.0 is the current version). Reboot after installing it -- even though it doesn't tell you to.
Run Windows Update. Make sure you're OK on those.
If that doesn't work, try downloading another ROM (OS only) -- like the Cingular Black 2.02 or the LVSM ROM, and see if that works.
You can also strip it apart -- use WinRAR to open the EXE file that you've been executing and extract the .nbh file from the EXE. Then go and download this guy: http://wiki.xda-developers.com/index.php?pagename=Hermes_CustomRUU and extract it into its own folder. Copy that .nbh file into that directory, and execute the executable -- it will flash your phone with a known good flasher.
But.... stepping all of the way back ... if the ROM doesn't work on your phone, it's very likely reflashing it won't help a single bit. Those ROM's are checksummed when they go on the phone -- if they're corrupted, they won't load right in the first place (and you'd end up with a boot-loader only phone). Soo... uh.. first, reboot/clean USB, then try a different ROM.
Last resort will be completely reinstalling Windows XP. I've had to do this several times because Windows will get in some weird state and it refuses to flash my phone. I finally gave up and started flashing on my Mac using a Windows virtual machine -- it's a lot easier to restore my Windows system to a working point when I do that.

Thanks to everyone who gave a response!
Here's all the information i was asked to post ( i will remember this for next time)
Cingular 8525 HERM100
Radio version: 1.40.30.00
Boot Loader version: (Not quite sure what this is?)
OS on your PC: Pro Black 2.0
ActiveSync version 4.5
I have redownloaded the ruu about 3 times and it has failed everytime.
Restarted the PC, disconnected everything from my laptop, realized that i havent installed Framework .NET 3.0, ( although i have it on my phone as i needed it to run hitchhiker)
So i'm going to download framework .NEt 3.0 and run it.
As for my phone, i uninstalled all the apps, hard resetted and everything is working fine right now, hasn't froze at all since yesteray, so im going to wait it out and see if something happens again.
Thanks again to everyone!! This forum is really really helpful.
-Matthew

How to determine the bootloader version
newnoise1024 said:
Boot Loader version: (Not quite sure what this is?)
-Matthew
Click to expand...
Click to collapse
You need to have a look at your user guide, as it states how to enter bootloader and check the version. Otherwise press and hold the left OK button and the power button at the same time, then hit the reset button with your stylus. You will enter a tri-color screen. This is bootloader mode. Jot down the numbers and compare against the below link.
Exiting is simple, press the reset button with your stylus.
Here's a valuable link for updating your bootloader.

Bootloader Version: SPL-1.40.01pro
IPL-1.01
i just tried to install Framework .NET 3.0 and got this error message
[04/20/07,08:50:20] Windows Communication Foundation: [2] Error: Installation failed for component Windows Communication Foundation. MSI returned error code 1603
[04/20/07,08:57:35] Windows Communication Foundation: [2] Error: Installation failed for component Windows Communication Foundation. MSI returned error code 1603
[04/20/07,08:57:54] WapUI: [2] DepCheck indicates Windows Communication Foundation is not installed.
[04/20/07,08:57:54] WapUI: [2] DepCheck indicates Microsoft .NET Framework 3.0 was not attempted to be installed.
i uninstalled any previous version, is there something i'm missing?

.Net Framework co-existence
newnoise1024 said:
Bootloader Version: SPL-1.40.01pro
IPL-1.01
i just tried to install Framework .NET 3.0 and got this error message
[04/20/07,08:50:20] Windows Communication Foundation: [2] Error: Installation failed for component Windows Communication Foundation. MSI returned error code 1603
[04/20/07,08:57:35] Windows Communication Foundation: [2] Error: Installation failed for component Windows Communication Foundation. MSI returned error code 1603
[04/20/07,08:57:54] WapUI: [2] DepCheck indicates Windows Communication Foundation is not installed.
[04/20/07,08:57:54] WapUI: [2] DepCheck indicates Microsoft .NET Framework 3.0 was not attempted to be installed.
i uninstalled any previous version, is there something i'm missing?
Click to expand...
Click to collapse
You're probably missing version 2.0 of the .NET framework. .NET Framework is to be left in place once installed. You should have left V 2.0 installed and added .NET 3.0. Go to www.microsoft.com/net and get version 2.0 redistributable re-installed on your machine. (If you can). If you cannot, search the KB and you may get by without rebuilding your OS.

"Head over to Microsoft's site and download a fresh version of Compact Framework .NET (3.0 is the current version). To be extra safe, go into Add/Remove Programs and uninstall any existing versions -- reboot -- then install the new CF Framework. Reboot after installing it -- even though it doesn't tell you to."
this is the advice i was given in this thread, so i uninstalled version 2.0 before installing version 3.0.
So am i screwed now? lol

Well, version 3.0 just installed successfully... does that mean i still need to install 2.0? or am i fine just running 3.0?
Sorry for all the questions, i just want this fixed :/

You should be good. Give it a go.
If not, just dl .Net CF2 and install that. I think you are fine now though.

Edit: never mind

version 2.0 installed fine
Thanks everyone

ERROR [260] After upgrading wtih the "official" wm6

I upgraded my 85' with the "official" wm6 rom and now I cannot go to other roms. The process was solid, meaning I was fully charged, no power loss, and it was synced. I've tried every version of rom available and get the same results. I went through the "brick" thread and I'm affraid I don't quite fit into any category. I can get phone calls and everything works, I just happen to like all of the great ROM's everybody is cooking and want to try them to see which one I favor. I tried using the Hard-SPL and all of the other bootloaders out there and I always get that ERROR [206]. I've tried to restart the machine, and hard reset the 85'. Any good idea's.... Maybe I need to search more? I'll try that.
==============================================================================
UPDATE:
What I should really do is rent a gun, and buy a bullet...
I'm not saying I'm some sort of season veteran of flashing... but I've never had to touch anything after I accept all terms. For some reason, when it came down to the last "Next" form, my phone flashes "Accept" super fast. So what to do?... I push "Yes" soft key fast as I can and it runs like grease lightening... I had to choose SS for the boot loader because it couldn't figure it out... Maybe next time around.

Have you tried to flash a coocked ROM using the microSD card?

Hi,
did you try get your phone in the tri color bootloader screen and then running the Hard SPL program again?

I did not try to do flash it woth the MicroSD card... I just found out that I could flash it with the MicroSD card about 2 seconds ago. And I wanted to Hard-SPL at the tri-color as a last result in fear of bricking but everything is okay now. As I said before, I've never had to touch my 85' while flashing the rom, it just did it on it's own, but that "official" rom was not about being neglected. And then when I saw it flash something and say "yes", I pushed it and never looked back. It's alllllllllllllllllll good.
I do have one question, is the SSPL preferred over the other choices? Or is there one that is recommended?

Hi joshkrajnak,
How did you solve this problem exactly cos I dont understand what your saying:

http://forum.xda-developers.com/showthread.php?t=298640
boz said:
I extracted these error codes from a Hermes rom upgrade 'read me' document, these should be of help if you get an error message during a rom upgrade. They should be common to all roms, please correct me if I am wrong.
ERROR [202, 204] : CONNECTION
This error message will appear when the device is not connected to ActiveSync correctly. Make sure you properly connect the device to the PC through ActiveSync before running RUU.
ERROR [260] : CONNECTION
This error occurs when there is an “open port error” before upgrading the CE ROM image.
Solution: You can reset the device and run RUU again. If you still encounter an “OPEN PORT ERROR” again, reset your computer and try again.
ERROR [206] : MEMORY ALLOCATION
ERROR [280] : UPDATE ERROR
When you see any of these error messages, close other running programs on the computer and run RUU again.
ERROR [208] : FILE OPEN
ERROR [210] : FILE READ
These error messages indicate that RUU lacks certain important files and cannot continue with the update. Please get the complete RUU package again.
ERROR [212] : FILE CREATE
ERROR [214] : FILE WRITE
ERROR [222, 224] : DEVICE NOT RESPONDING
These error messages will appear when remote access control has failed. Check the ActiveSync connection and try running RUU again.
ERROR [220] : MAIN BATTERY POWER
This error message will appear when the device’s battery power is not sufficient. Although RUU will instruct you to plug in the AC adapter, it still has to make sure that your device has enough power to upgrade the radio. (Even when you plug in the AC adapter, the device is unable to charge the battery when it is upgrading the radio).
ERROR [238] : FILE READ
This error message may appear when, for some unknown reason, the ROM image on the Mobile Device is corrupt. Download the whole RUU and try again.
ERROR [240] : FILE OPEN
When this error message appears, check whether the downloaded image is placed in the directory of RUU. If, for some unknown reason, you find that the ROM image is not located in the RUU folder, you have to download the RUU and retry again.
ERROR [242] : INVALID LANGUAGE
ERROR [244] : INVALID MODEL ID
ERROR [294] : INVALID VENDER ID
ERROR [296] : UPGRADE ONLY
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
ERROR [246] : DEVICE NOT RESPONDING
This error message indicates that RUU cannot start the update process. Please contact your service provider for assistance.
ERROR [262, 276, 284, 302] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
ERROR [300] : INVALID UPDATE TOOL
This error message will appear when you use the incorrect RUU version to upgrade.
ERROR [330] : ROM IMAGE ERROR
This error message will appear when you use the incorrect RUU to upgrade and the image file size is larger than the Flash ROM size. In this case, download the correct RUU version to upgrade.
Click to expand...
Click to collapse

To Clarify: Whenever I went to upgrade my 85' to a different ROM, it wouldn't recognize my bootloader, and then after selecting any of the options, it would give the "ERROR [206]" message and fail miserably with any rom.
What I did to correct it was this: On the "official release" whenever I went to upgrade the ROM, the 85' would show a message at the bottom, the same as any "Notification" would giving me the option to either "confirm" or "dismiss". I did not notice the messages up until it caught my attention out of the corner of my eye on the very last attempt. The messages would quickly appear and disappear, so when the time came and it stated:
Current Rom: 3.25.###.###
Upgrade: 1.##.###
I had to press a confirm notification to continue on or I would get the "206" error message. The quote posted by Binyo is correct, but it does not apply in my situation.
ERROR [206] : MEMORY ALLOCATION
ERROR [280] : UPDATE ERROR
When you see any of these error messages, close other running programs on the computer and run RUU again.
Although that may be true that some applications may interfere with the upgrade process, I had turned off all applications and killed any services during this process.

Restore official ROM

Hello,
first of all, i want to thank you all for this great forum.
I have a small problem. I have bought a few days a HTC P3600. Everything was working fine.
Yesterday i tried to upgrade to wm6 using MARY 3.4.1 with sucess following the upgrade guide in trinityguides.info.
I have installed the Des’ Crash-Proof SPL and then flash the MARY 3.4.1 ROM.
Until now everything is working fine except the active sync. I tried to AS with the usb cable but it won't connect. It gives me the following error:
"Communication Error:Cannot start communications with the desktop computer. Remote Networking could not start due to a critical error (Error 608). Please reconnect your device. If the problem persists, restart your device using the instructions provided by the manufacturer."
I've googled it and tried all the suggestions that i could find, with no success.
If i connect via BT there is no problem.
The problem is that i want to put back the official ROM from HTC and if i can't connect with active sync via usb, i can't restore it.
BTW, if i put back the official ROM, the Hard-SPL is also flashed to the original??
Thank you

cabexas said:
Hello,
first of all, i want to thank you all for this great forum.
I have a small problem. I have bought a few days a HTC P3600. Everything was working fine.
Yesterday i tried to upgrade to wm6 using MARY 3.4.1 with sucess following the upgrade guide in trinityguides.info.
I have installed the Des’ Crash-Proof SPL and then flash the MARY 3.4.1 ROM.
Until now everything is working fine except the active sync. I tried to AS with the usb cable but it won't connect. It gives me the following error:
"Communication Error:Cannot start communications with the desktop computer. Remote Networking could not start due to a critical error (Error 608). Please reconnect your device. If the problem persists, restart your device using the instructions provided by the manufacturer."
I've googled it and tried all the suggestions that i could find, with no success.
If i connect via BT there is no problem.
The problem is that i want to put back the official ROM from HTC and if i can't connect with active sync via usb, i can't restore it.
BTW, if i put back the official ROM, the Hard-SPL is also flashed to the original??
Thank you
Click to expand...
Click to collapse
Try an other usb port on your computer.
And yes, offical rom restore everything (ipl,spl,radio,os)

I have already tried that.
The only thing that i can remember that i didn't tried, is connect in a different computer, but i will try that as soon as i get home.
thanks

try another ROM. got that activesync issue also with every Mary ROM.

You can find it in UDK rom thread
Active Sync Error 608
Try this to solve the problem:
Quote:
Originally Posted by nanni100
I solved cause my Windows Firewall was damaged and not customizable, then i found a reg file to solve this problem, installed on pc and reboot. On startup i saw the window of Win Firewall who asked me to unlock Activesync i said yes and turn off the firewall
I have a ethernet router with DHCP enabled
Then i configured the phone:
-Enabled Advanced Netword Function
-Go on Setup, Wi-Fi, Network, Remote HOST- NDIS
-Select the Specific IP Address like this:
IP Add: 169.254.2.1
Sub Mask: 255.255.0.0
Gateway: 169.254.2.2
and on the other page put only on the first DNS: 169.254.2.1
on the pc lan connection i leave the dhcp enabled "Obtain IP Address from serv" also for DNS (obviously cause i have the DHCP enabled on my router)
And MAGICLY all start works FINE!!!
After hours and hours spent on configurations, the problem was "simply" the windows firewall, but also the configuration of Remote Host-NDIS is important
Hope that can be useful for other

Right now i don´t have the MARY rom but the TUGA V3 ROM and problem continues. I have already tried to setup Remote HOST- NDIS like that and it didn´t work too.
Anyway thanks for all your help.
Thanks

Use the SD Card Method...
I use the SD Card Method. MUST BE FORMATTED AS FAT32 first. (As per willowxda's post. Thanx Willowxda)
Copy SSPL_TRIN.exe to your SD card's Root folder. (Included in ZIP File)
Rename the RUU_signed.nbh file in your OEM Rom to TRINIMG.nbh
Copy TRINIMG.nbh to your SD card's Root folder.
Run SSPL_TRIN.exe from your device.
Allow it to Flash and Restart as needed.
Works like a charm...

cabexas said:
Hello,
first of all, i want to thank you all for this great forum.
I have a small problem. I have bought a few days a HTC P3600. Everything was working fine.
Yesterday i tried to upgrade to wm6 using MARY 3.4.1 with sucess following the upgrade guide in trinityguides.info.
I have installed the Des’ Crash-Proof SPL and then flash the MARY 3.4.1 ROM.
Until now everything is working fine except the active sync. I tried to AS with the usb cable but it won't connect. It gives me the following error:
"Communication Error:Cannot start communications with the desktop computer. Remote Networking could not start due to a critical error (Error 608). Please reconnect your device. If the problem persists, restart your device using the instructions provided by the manufacturer."
I've googled it and tried all the suggestions that i could find, with no success.
If i connect via BT there is no problem.
The problem is that i want to put back the official ROM from HTC and if i can't connect with active sync via usb, i can't restore it.
BTW, if i put back the official ROM, the Hard-SPL is also flashed to the original??
Thank you
Click to expand...
Click to collapse
it is very simple but it took me too long time to figure out.
My PC hangs several times, I thought it is related to DMA or to IRQ interrupt requests for the microproccessor, but failed to solve it. This problem never happened to me while I was having the Qtek ppc, and even when I used the official HTC ROM when I bought this TrinTy. Then I started to check everything related to USB connection till I catch it. it is very silly, just to clear one checkbox.
Here what worked for me:
Click Start > Settings > Connections > USB to PC
you will find a checkbox......Just uncheck it. --------> Thats to disable advanced network functionality.
I believe it should work for you.

Try POWER + CAMERA + SOFTRESET (this enter the bootloader mode) and then install the ROM you like ... you will get no errors !!!

Click Start > Settings > Connections > USB to PC
you will find a checkbox......Just uncheck it. --------> Thats to disable advanced network functionality
Click to expand...
Click to collapse
That was the first things that i tried to do, but with no luck.
Yesterday, i did what nightfear suggested and it worked fine.
As soon as i restored the official rom, AS started to work like a charm.
That is a strange issue, but for now it's resolved.
Lets see if the problem doesn't come back when i put WM6 on it again.
Thank you all for your help.

Mini SD card must be formatted in FAT32 for flash update to work
I have been trying to upgrade flash via SDCard but it did not work no matter how hard I tried (switch btw hardspls).
Then I realised that I have to format the SDCard to FAT32 so that the Hard SPL can recognise the card in bootloader prompt.
I am using Hard SPL 1.30

[Question] 260 error when updating ROM

Okay, I've searched alot to get this thing solved. When I try to update my rom, the update starts normally, but then my telephone screen turns black, my gets disconnected, windows tells me it has found new hardware. The update failes and returns error 260 (connection lost). When I soft-reset the telephone afterwards, it returns to it's old shape.
Info about my telephone.
Rom: 1.93.404.1 NLD
Radio: 1.0025.05
PC: Windows XP SP 3, Active Sync 4.5
I tried to update with this rom: RUU_Diamond_HTC_NLD_2.03.404.3_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship.exe
I also tried to update to Hard-SPL but that gave me the same error.
PLease guys does anyone of you know how to fix this? (personally I think it's windows xp which is screwing up).
Thanks in advance, I appreciate all help.
Yours, Martijn.

Even the tiniest tip may help (A)

I had the same trouble with that rom, I tried from internal memory and it worked. Search the wiki I am sure the info is there.

"ERROR [260] : UPDATE ERROR
This error occurs when there is an "open port error" before upgrading the CE ROM image. Solution: You can reset the device and run RUU again. If you still encounter an "OPEN PORT ERROR" again, reset your computer and try again."
This is what the WIKI tells me. But I have tried that. How did you manage to perform the update on the internal storage? Because I tried that with hard-spl but it wouldn't work.
Besides I only have .exe files for the Hard-Spl and the official rom from HTC.
Thanks for your reply though.
EDIT PART, just read this on another thread in the wiki:
ERROR 260 (Update Error):
"Your phone is not connected to ActiveSync. Check your connection or restart the phone. Also make sure in ActiveSync that "Allow USB connections" is checked (under File->Connection Settings). If this still doesn't help, then remove the memory card and SIM card before flashing."
I'm going to try this now, if it worked, I'll let you know
Just found out I have a CDMA version or something, I'll try google for the problem now.

Get the rom image from your temp directory and look here, found in the wiki
http://wiki.xda-developers.com/index.php?pagename=Diamond_FlashfIS

Does the hardware install incorrectly? My laptop did this on XP.
XP would find the new hardware, my bootloader would say USB. Then it'd tell me new hardware could not be installed properly and from there my phone suffered those symptoms - Back to where I was. Funnily enough it eventually fixed itself.

dickenz said:
Does the hardware install incorrectly? My laptop did this on XP.
XP would find the new hardware, my bootloader would say USB. Then it'd tell me new hardware could not be installed properly and from there my phone suffered those symptoms - Back to where I was. Funnily enough it eventually fixed itself.
Click to expand...
Click to collapse
It looks alot like your problem yes. But last time the hardware installed correctly, then the patch I found for CDMA models on ppcgeeks failed, and my telephone got bricked. So I'll need to get that fixed first. After that I'll sure think twice before I try another rom update :/
Thanks for all the help though, and I have to advice everyone to not use the hard-spl for cmda users from ppcgeeks unless you're 100% sure it fits your model!

[Q] Does not detect SIM card (solved)

Hello everybody,
I just got a Samsung Nexus 9250 phone. I came to this forum to look for tutorials, tips, etc. I'm sure I will find a lot of interesting information around here.
After a few minutes using the device, I noticed that it had never detected my SIM card . My card works perfectly in my older phone. I tried with other people's cards and it happens the same. I have not been asked to input my pin code in any case. There is no message where I am asked to insert a SIM card.
This phone has never been manipulated (no jailbreak, unlock, etc). Then I tried with a hard reset, no. The "plane mode" is not activated.
If I search for available mobile networks / network operators, the phone finds the common ones. But if I try to choose one I get the message : "Unable to connect to this network at this time. Please try again later".
Other features (wifi, etc) seem to work OK. Except that I can't find any icon to use some kind of Android Market / Google Play.
Anyway my priority right now is to make the SIM card work.
So the question is : any ideas about how to make it work? Except, of course, some kind of hardware malfunction in the card reader.
Android version is 4.0.1.
Model number : GT-I9250_EUR_XX
Thanks in advance.

It is hard to believe, but it got fixed when I updated the firmware.
At the begining I tried with the tutorial in this thread :
(4.0.4 Unofficial Changelog *Update2 02/05*)
http://forum.xda-developers.com/showthread.php?t=1481044
But somehow my terminal did not like that version. I got some errors like :
-------------------------------
1.-
assert failed: file_getprop(”......
-------------------------------
2.-
- Install / sdcard …
Finding update package …
Opening update package …
Verifyng update package …
E: signature failed to verify wholefile
E: signature verification failed
Installation aborted.
-------------------------------
Which some people seem to have too.
Never mind, I could upgrade "only" to 4.0.2 and it worked like a charm. I suppose I will wait for 4.0.4 to be available globally.
Thank you very much to the community. You did not answer my question, but there is a lot of useful information out there.