Develop Bugs

EVO 4G - Revol Wireless Data Settings

Could anyone please tell me what the settings to get data working on my evo with revol wireless? Any help would be appreciated.
Had the phone flashed to revol and everything including data 3g worked then data stopped and I receive error 67 wrong username and password.
I was able to get into the settings using ##3282# and everything is set up for sprint PCS. I need the settings for Revol.
I also emailed Revol and they will only support data on phones they sold and will not give me the information for a flashed phone.
Thanks

who the hell is revol?

revol.com - Its a cell provider in Ohio Pensilvania Kentucky and indiana - $40.00 month unlimited text talk and web

Does anyone have any information - Any Help would be appreciated
Thanks

please dont tell me you bought an evo to use on a network that doesnt even support the evo, nor the phone support them?
its not ad easy as a couple of settings... you got work ahead of you.
i would start by reading the evo on metropcs threads, and the cricket threads and see if anything there will help you.
Sent from my PC36100 using XDA App

how did you flash to revol...

3G on Revol
The hard part is getting the codes for the 3g revol data. Does ANYONE know how to do that?!?
Oh and how would you go about either changing an ESN (if its even possible) or putting the ESN into Revols database? They cant connect it without the ESN active in their system right?
Also codes for a Droid X i noticed were a little different (and I know this works), it may be different though for a Droid X2, however it's probably the same.
For 1x:
1. Connect Phone Via QPST and open Service Programming. (like above)
2. Once you have began Programming, click "Read From Phone". It will ask you for an SPC/MSL code. That code should now be six zeros (000000).
3. Click M.IP and set Mobile IP Behavior as MOB + Simp...
4. Select any profiles (there should be 1 or 2) listed under User Profiles, and click edit. Do the following for all profiles.
5. Make sure that "Profile enabled" is checked and enter in the following:
NAI: [email protected]
Tethered NAI: [email protected]
6. Change home address, primary HA, and secondary to read "255" in every available slot. Example: "Home address: 255.255.255.255"
7. On both HA Shared and AAA Shared Secret, make sure "Retain Last Value" is selected
8. Change MN-HA SPI to 12C and MN-AAA SPI to 2.
9. click ok
10. Do for all profiles
11. Set active user as 0.
12. Click PPP Config
13. The "Um" Button
14. Under user ID enter [email protected] as well as for tethered NAI. If a text box is black with red lines in it, click it and press ctrl D. Enter revol in the password box.
15.Click "AN" Button and repeat step 12.
16. Click "write to phone". Ignore any errors that occur.
17. Phone will reboot and it will be completed!
18. ENJOY!
And revol.epic could you try to explain the MMS settings a little more i get confused ill open the xml in dreamweaver or notepad and i see nothing about "production" in step 5? could you give me the stap by step for notepad and then just quote word for word whatever the document is? Thanks.
Please answer my first 2 questions if you know the answer!

try these cause my internet and mms work
dial ##3228#
then edit passcode is 000000
change values as follows:
under data profile:
user name:10digit [email protected]
home address:0.0.0.0,
primary HA:10.2.1.15,
secondary HA to 10.2.1.16.
On both HA Shared and AAA Shared Secret:revol
MN-HA SPI: 12C and MN-AAA SPI: 2.
under the advanced tab:
Slot Cycle Index:0 can leave as default but changing this to 0 will let you get messages and calls faster
MCC:310
MNC:00
ACCOLC:2
Vocode disable
Home Orig:Voice 13k also can leave as default but voice 13k is way better than EVRC or anything else
Roam Orig:Voice 13k
LBS PDE IP: Blank
LBS PDE Port: BLANK
Home Sys Reg:enable
Foreign SID reg:enable
DDTM:disable
Home SID/NID#1:4139/65535
at the bottom of advanced tab is rtsp/http:
set both proxy ip to :0.0.0.0
set both ports to : 0
also in the messaging app:
go to connection settings:
name should be: Production
mmsc: http://mms.revol.us/revol/mms.php
port and proxy: (not set)
protocol: WAP 2.0
if you cant edit these in the app its self then you can use APN backup and restore(in the market for free) ben restore the apn and your all set.
Not sure if all this is necessary but my mms works perfectly and i have slightly better internet speeds.

saprano614 said:
try these cause my internet and mms work
dial ##3228#
then edit passcode is 000000
change values as follows:
under data profile:
user name:10digit [email protected]
home address:0.0.0.0,
primary HA:10.2.1.15,
secondary HA to 10.2.1.16.
On both HA Shared and AAA Shared Secret:revol
MN-HA SPI: 12C and MN-AAA SPI: 2.
under the advanced tab:
Slot Cycle Index:0 can leave as default but changing this to 0 will let you get messages and calls faster
MCC:310
MNC:00
ACCOLC:2
Vocode disable
Home Orig:Voice 13k also can leave as default but voice 13k is way better than EVRC or anything else
Roam Orig:Voice 13k
LBS PDE IP: Blank
LBS PDE Port: BLANK
Home Sys Reg:enable
Foreign SID reg:enable
DDTM:disable
Home SID/NID#1:4139/65535
at the bottom of advanced tab is rtsp/http:
set both proxy ip to :0.0.0.0
set both ports to : 0
also in the messaging app:
go to connection settings:
name should be: Production
mmsc: http://mms.revol.us/revol/mms.php
port and proxy: (not set)
protocol: WAP 2.0
if you cant edit these in the app its self then you can use APN backup and restore(in the market for free) ben restore the apn and your all set.
Not sure if all this is necessary but my mms works perfectly and i have slightly better internet speeds.
Click to expand...
Click to collapse
Did anyone manager to get this working?
I inputted the setting and got 3g to show up but after resetting the phone. Nothing. The settings wont stick.

In qpst change your msl password. I had the settings sometimes revert and that seemed to stop it.
Sent from my PG86100 using xda app-developers app

jlmancuso said:
In qpst change your msl password. I had the settings sometimes revert and that seemed to stop it.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Do you have any idea how to get the ha and aaa passwords off a zte n850?
I have talk text and 1x.
3g shows up time to time but doesnt work.
Ive tried revol, revolwireless, secret
Im out of ideas.
I tried alogcat while being in ##data#
Tried dsf tools, cdma ws, qpst (nvm folders locked!), qdxm.
Ive managed to get it rooted on my own.
Wrote up a guide in my sig.
Is there anyway I can use root to allow me to get thoseS?

Cjen1987 said:
Do you have any idea how to get the ha and aaa passwords off a zte n850?
I have talk text and 1x.
3g shows up time to time but doesnt work.
Ive tried revol, revolwireless, secret
Im out of ideas.
I tried alogcat while being in ##data#
Tried dsf tools, cdma ws, qpst (nvm folders locked!), qdxm.
Ive managed to get it rooted on my own.
Wrote up a guide in my sig.
Is there anyway I can use root to allow me to get thoseS?
Click to expand...
Click to collapse
to gain access to nvm folders create a folder in the root of your efs called opensesame save it then reboot phone and you should now have access to your nvm but be very very careful. Before you change any files in your efs make a backup of it first because you can cause real damage and brick your device.

Thanks I'll try it out soon. Don't worry u know my way around the nvm folder. I've flashed like 5 thunderbolts in my day ha.
I'll let you know if it works. Should there be space between the words like the thunderbolt?
---------- Post added at 07:00 PM ---------- Previous post was at 06:36 PM ----------
jlmancuso said:
to gain access to nvm folders create a folder in the root of your efs called opensesame save it then reboot phone and you should now have access to your nvm but be very very careful. Before you change any files in your efs make a backup of it first because you can cause real damage and brick your device.
Click to expand...
Click to collapse
Yeah it didn't work. I tried
opensesame
open sesame door
open sesame
opensesamedoor
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

anyone?

To get 3g go here:
http://z4cellforums.webs.com/apps/forums/topics/show/8667356-samsung-galaxy-s3-flashed-to-revol-wireless-plus-root
Use straight talks prls for better 3g.
Use dfs tools.

tron360 said:
Could anyone please tell me what the settings to get data working on my evo with revol wireless? Any help would be appreciated.
Had the phone flashed to revol and everything including data 3g worked then data stopped and I receive error 67 wrong username and password.
I was able to get into the settings using ##3282# and everything is set up for sprint PCS. I need the settings for Revol.
I also emailed Revol and they will only support data on phones they sold and will not give me the information for a flashed phone.
Thanks
Click to expand...
Click to collapse
all the software to flash with this will help:
http://kickass.to/android-network-flashing-kit-v-1-2-2013-zip-t8237851.html#main

[MetroPCS] 3G Speeds & Settings + Help Getting 3G! |PRL 3032 Released!|

[MetroPCS] 3G Speeds & Settings + Help Getting 3G!
MetroPRL Website
Thread Introduction & Purpose:
Welcome,
You guys can call me JD, I created this general thread so MetroPCS users with flashed HTC EVO phones can post their 3G speeds & locations, and get help on obtaining 3G signal and other MetroPCS related things such as MMS settings. I'm open to answering any questions you guys may have to the best of my knowledge.
MetroPCS is currently updating 20% of there towers from 1X to 3G.
MetroPCS 3G Coverage Map:
Provided by Cellular Maps
View attachment 762378
Simple Steps to getting 3G:
1.Download and Write one of the following PRL's:
3019, 3020, 3022, 3023, 3024, 3025, 3026, 3027, 3028, 3029, 3030, 3031, 3032, 3033, 3035
PRL Download Website
PS: While at the Website, Please click on some ads, in support to maintaining the website up to date. Thank You.
Writen HTC EVO PRL Update Guide
Here's a HTC EVO PRL Video Update Tutorial created by Mikekelso421:
http://www.youtube.com/watch?v=gP4xR_rmPrU&list=UUxqzz5EkFT8YZpnC9UZR6-A&feature=plcp
2.In QSPT Service Programming under M.I.P tab set the Mobile IP behavior to 'Simple IP' This will allow your phone to connect to 3G when available or 1X when not in a 3G service area.
If there is 3G signal in your area after completing these 2 simple steps you should now have 3G.
If your still having trouble getting 3G and your sure theirs 3G in your area theres still hope, Try forcing 3G by setting your EVO into HDR Mode.
My Exact DFS Settings & Guide
Register, Create Account!
Download & Install. DFS.exe
Dial ##DIAG# On EVO.
Connect to PC.
Open DFS.
Enter Login Info.
You'll enter Demo Mode (Allows Full Access of Program.)
Next To Ports, Next to Open Close Ports button, There's a drop down menu, Choose your phone (HTC Diagnostic Interface (COM #)
Then Click Open/Close Port Button until it opens your port and all your phones info appear in yellow in the Equipment screen.
Press SPC send button (Unlocks Phone. )
Go to the Programming Tab, Where you'll find, Nam, Data, Mobile IP Tabs
Nam Tab> Read> Edit Settings> Write!
Data Tab> Read> Edit Settings> Write!
Mobile IP Tab> Read> Edit Settings> Write!
Be careful while changing setting, look over things more than twice, If you need help on anything I'm here, Live Support !
My Nam Tab:
View attachment 772873
My Data Tab:
View attachment 772872
Check out the Mode Settings under the Data Tab in the Mode Box
My Mobile IP Tab:
View attachment 772874
My Exact EPST Settings for Comparison:
To view & edit yours:
Dial ##3282# (##DATA#)
Enter Edit Mode
Enter SPC: 000000
Compare.
Code:
Data Profile:
Active Profile: 1 (Mines is 1, but it depends on which profile is set up on your phone for MetroPCS)
User Name: 786#######@mymetropcs.com
SPI MN-HA: 1234
SPI MN-AAA: 1234
Reverse Tunnel Preferred: Enable
Home IP Address: 0.0.0.0
Primary Home Agent: 0.0.0.0
Second Home Agent: 0.0.0.0
HA Shared Secret: ****** (MetroPCS MSL Code)
AAA Shared Secret: ****** (MetroPCS MSL Code)
DSA Server URL: https://dsa.spcdnsnet:443/dsa/ (Still on Sprints, but seems to not affect anything.)
EVDO:
DDTM: Disable
Preferred Mode: Automatic
Advanced:
MEID(HEX): (Your MEID)
P_REV: IS-2000 (6)
SCM: 58
Slot Mode: Enable
Slot Cycle Index: 2
MCC: 310
MNC: 00
MSID:786#######
ACCOL:5
Vocoder: Enable
EVRC-B: Disable
Home Orig: EVRC
Roam Orig: Voice 13K
LBS PDE IP: (?)
LBS PDE PORT: (?)
Home Sys Registration: Enable
Foreign SID Registration: Enable
Foreign NID Registration: Enable
DDTM: Disable
Home SID/NID #1: 6503/65535
MMS Server URL: http://mms.metropcs.net:3128/mmsc
RTSP Proxy Port: 0
RTSP Proxy Address: rtsp.vog.sprintpcs.com (Still Sprints)
HTTP PD Proxy Port: 0
HTTP PD Proxy Address: pd.vog.sprintpcs.com (Still Sprints)
Hope this helps you guys!
Steps to manualy setting your EVO into HDR Mode:
*Warning: Manually forcing your phone into HDR Mode or Digital Mode my cause issues like your PRL going into 0000 IF your phone has been MEID repaired. You know who you are so do not attempt this if your HTC EVO was MEID repaired. Only try this if your are sure your HTC EVO was not MEID repaired.
Dial ##3424# (Sets your phone in Diag mode).
Connect your EVO to PC thourgh USB.
Open QPST.
Start Clients>Service Programming.
Read from phone.
Go to System tab.
Set your Preffered Mode to: HDR only
Write to Phone.
Reboot your phone and your HTC EVO should now be forced to connect to 3G!
The reason why I ask you guys to do this by QPST rather than by Advanced Settings is because most of the times you change it on Advanced Settings but it really doesn't change anything.
Although you guys can check to see if your connected to Evdo using Advanced Settings App. Open the app and go into Phone Information, take a look at your Network Type it should now say CDMA- EvDo rev. A!
Screenshot:
View attachment 767449
MetroPCS MMS Fixes:
It works with Most roms. Tested and Confirmed on Swagged Out Stock.
Flash an MMS script compatible with your rom.
__
[New MMS Script for 4.67]
Created by Mteezey
4.67 MMS Script Mteezey
__
MetroPCS APN Settings:
1.Download APN Manager from the Android Market.
2.Create a new APN and enter these settings:
APN: internet
Proxy: wap.metropcs.net:3128
Port: 3128
UserName: Phone#@mymetropcs.com
Password: MSL code*
Server: wap.metropcs.net
MMSC: http://mms.metropcs.net:3128/mmsc
MMS Proxy: wap.metropcs.net
MMS Port: 3128
MCC: 310
MNC: 004
APN Type: MMS
3. Download Any Cut from the Android Market, then create an activity, apns on your homescreen.
Open apns choose MetroPCS and edit then authentication type to pap or chap. If no APN exists create a new one and fill it in with the info above.
-Make sure to enable created APN in APN Manager.
-Also if your MMS still isn't working make sure the metropcs.sh file from the script is in the correct place, if it is execute it. If It's not etract it from the script, and place it in the root of the internal memory, set permissions, and then execute it.
*If you want to figure of your MetroPCS MSL code check out whiterabbit.org
My Location & Current Setting & Speed:
Location: Miami, FL
Speed:1766D 532U
PRL: 3022
Radio:2.15.00.11.19
ROM: Swagged Out Stock
Screen Shot For Proof:
View attachment 759864
User Confirmed MetroPCS 3G Locations:
Miami, FL [JD2589]
Sanford, FL [chad9f9]
Hialeah, FL [ronwins]
Stockton, CA [edgeez25]
Atlanta, GA [rovertech1]
Lakeland, FL [StarfleetcCommunications]
Bartow, FL [StarfleetCommunications]
Davenport, Fl [marcnoel101]
Manteca, CA [montecristo1]
French Camp, CA [montecristo1]
Lathrop, CA [montecristo1]
Tracy, CA [montecristo1]
West Palm Beach, FL [pimpmack]
Hudson Country, CT [medinab77]
Fort Pierce, FL [pimpmack]
Port St Lucie, FL [Mikekelso421]
Ypsilanti, MI [bill48105]
Ocala, FL [mikeuriah]
Sacramento, CA [chainsaw5001]
Modesto,CA [discobiscuit]
Bakersfield, CA [yknujssab]
Big Thanks to all users above
Problems/Solutions:
Stuck in Digital Roaming Mode?
Disclaimer
I'm only providing this information to help out MetroPCS users, Please proceed with caution and at your own risk. Anything that happens is your responsibility. I am not responsible for any damages you cause to your phone hardware, software, service provider account, or any other damages that might result from your usages of this information.
This is a friendly warning, Proceed with caution.
_______
I'm currently a college student and have many expenses, If you guys appreciate my work and time dedicated to helping others, consider donating. All donations are welcome.
Thank You.
-For those of you guys that are mobile here's a direct link:
JD2589 XDA Donations
If you have any other questions or need help just ask.
Happy Posting
Also, If you find this information or my posts helpful in anyway, besides donating, hit the 'Thanks' button. Thank You!​
JD

JD2589 said:
Hey Guys,
I wanted to make a general thread where MetroPCS users with flashed HTC EVO phones could post their location, 3G speeds, and settings like prl and rom that best worked for them. MetroPCS has recently been updating some of their towers to work with 3G.
This thread is only for users to come and post and compare there speeds so please take your legal issues or drama somewhere else, Thanks.
It should be something like this:
-Location: Miami, FL
-Speed:1766D 532U
-PRL: 3022
-ROM: Swagged Out Stock
-Screen Shot For Proof:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*I want this thread to be user friendly, So NO Trolls Allowed!
-Happy Posting!
Click to expand...
Click to collapse
Wait... what? Metro has 3G now?

Yes MetroPCS has 3G in some areas.

3g here in Sanford, fl using prl 3022. Speedtest app not working but seeing a Max dl rate in wiring tether of 253 kbps
Sent from my SCH-R720 using XDA App

chad9f9 said:
3g here in Sanford, fl using prl 3022. Speedtest app not working but seeing a Max dl rate in wiring tether of 253 kbps
Sent from my SCH-R720 using XDA App
Click to expand...
Click to collapse
Cool, Thanks for posting, Not as quick as it should be.. I guess you have bad reception.. And strange that your speed test app isn't working.

I'm gonna start adding confirmed MetroPCS 3G locations by members in the main post.

Not sure what it is. Speed test app drops my connection to 1x but when browsing the internet or using wifi tether 3g stays. I was also expecting higher rates but guess it was my location. Still better than my previous peek of 25kbps
Sent from my SCH-R720 using XDA App

Im in Stockton Ca and my Speeds are all over the place ... Ive tried Prl 3022 and 3023 and I get 3g with both... what radio are you on

edgeez25 said:
Im in Stockton Ca and my Speeds are all over the place ... Ive tried Prl 3022 and 3023 and I get 3g with both... what radio are you on
Click to expand...
Click to collapse
Hey,
Thanks I forgot to include that!
Radio:2.15.00.11.19
--------------------------------------
[HTC Evo XDA Premium App]
--------------------------------------

Been following this for a while now...
I've been following Bloody's thread for a while and I've seen pretty much all the posts in relation to Metro 3G.
I was wondering if you could either post a quick guide on how to flash the new PRL here, or just PM me a quick guide. I'd really appreciate it.
I've tried flashing the PRL using CDMA workshop, and also by downloading the new EPST.apk, and using dialer codes, but to no avail. I'll gladly post up my speeds once I can get it working. Thanks a lot!
My info is
-Location: Miami,FL / Hialeah, FL
-ROM: MetroDroid 2.2

ronwins said:
I've been following Bloody's thread for a while and I've seen pretty much all the posts in relation to Metro 3G.
I was wondering if you could either post a quick guide on how to flash the new PRL here, or just PM me a quick guide. I'd really appreciate it.
I've tried flashing the PRL using CDMA workshop, and also by downloading the new EPST.apk, and using dialer codes, but to no avail. I'll gladly post up my speeds once I can get it working. Thanks a lot!
My info is
-Location: Miami,FL / Hialeah, FL
-ROM: MetroDroid 2.2
Click to expand...
Click to collapse
Hey ronwins,
I just PM'd you a whole guide. Hope it helps!

ronwins said:
I've been following Bloody's thread for a while and I've seen pretty much all the posts in relation to Metro 3G.
I was wondering if you could either post a quick guide on how to flash the new PRL here, or just PM me a quick guide. I'd really appreciate it.
I've tried flashing the PRL using CDMA workshop, and also by downloading the new EPST.apk, and using dialer codes, but to no avail. I'll gladly post up my speeds once I can get it working. Thanks a lot!
My info is
-Location: Miami,FL / Hialeah, FL
-ROM: MetroDroid 2.2
Click to expand...
Click to collapse
If MetroDroid is AOSP, your best bet would be to do a nandroid, wipe, flash to any sense rom, run epst, dial ##775# and update PRL. Once you are done, roll back to MetroDroid.

egzthunder1 said:
If MetroDroid is AOSP, your best bet would be to do a nandroid, wipe, flash to any sense rom, run epst, dial ##775# and update PRL. Once you are done, roll back to MetroDroid.
Click to expand...
Click to collapse
Hey egzthunder1,
That's a really good suggestion, You reminded me of the PRL Project Rom. Its a Rom you flash exclusively to update your PRL.
Check it out here's a link:http://forum.xda-developers.com/showthread.php?t=1176169

edgeez25 said:
Im in Stockton Ca and my Speeds are all over the place ... Ive tried Prl 3022 and 3023 and I get 3g with both... what radio are you on
Click to expand...
Click to collapse
Just updated my prl..i am also in Stockton...no 3g for me...I have a flashed htc evo (Metro PCS)...
Update: I got it working!
I did extensive search on this. Here is what worked for my flashed, rooted, HTC Evo, Sense, gingerbread....my speeds were at about 96kbps to 129kbps....after prl update 600kbps to 2mbps....
First, the dial key did not work when I dial ##775#- which translates to ##PRL#...someone said on different posts that either an HTC or Sprint update removed this function... so you have to install EPST.apk onto your phone to make it work...I included it. That is only if yours does not work. You also have to know your MSL number to unlock your phone...try all six 000000, if you don't know it, first. There is an app on the Marketplace, search MSL reader- hopefully that can tell you your number. Place the 3022 prl file onto your sd card...i included the 3022 prl. After installing EPST, dial ##775# and it will ask you to enter your password, then tab update prl...then the EPST should load up...it is buggy, you will see it takes a couple of seconds to load up...and if it asks you to foreclose or wait...make sure you press wait...then it will load up. Then it will ask you to find prl, if it's in your sd card, you will see the prl file on the bottom, tab on the right circle input then ok. Then it will take you to update PRL and you can see that the file 3022 is ready...then hit menu and click on the plus to commit modification...wait it is making changes..then the EPST will tell you to reset by pressing ok...you should see a pop up saying commit successfully...if it doesn't reset after 10 seconds...then you reset it manually...that is it...should work....

Thanks to JD's help, I've been able update my PRL and get 3G speeds.
So here is my info
-location: Hialeah, FL
-PRL: 3022
-ROM: MetroDroid 2.2
-Radio: no clue
Ok xda app is being difficult and not letting me post the speed test pic so here are my speeds.
Download: 890 kbps
Upload: 502 kbps
Sent from my HTC Evo 4G using XDA App

Hello I'm on mikG 2.1/3.0 and I still can't send mms. I even flashed the newest v2 script, also I have the newest 3024 prl and no 3G in Ft.Worth, Tx! Geez I'm screwed both ways. Haha
Sent from my PC36100 using XDA App

ronwins said:
Thanks to JD's help, I've been able update my PRL and get 3G speeds.
So here is my info
-location: Hialeah, FL
-PRL: 3022
-ROM: MetroDroid 2.2
-Radio: no clue
Ok xda app is being difficult and not letting me post the speed test pic so here are my speeds.
Download: 890 kbps
Upload: 502 kbps
Sent from my HTC Evo 4G using XDA App
Click to expand...
Click to collapse
No problem, Glad to help
Thank you for posting your speeds, Enjoy your speed, your area isn't capped yet.. Were i live its really slow seems to be capped for now, I'm not to far from Hialeah.
JD

mangordi89 said:
Hello I'm on mikG 2.1/3.0 and I still can't send mms. I even flashed the newest v2 script, also I have the newest 3024 prl and no 3G in Ft.Worth, Tx! Geez I'm screwed both ways. Haha
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Hey,
Your MMS may not be working due to problems MetroPCS is having with their towers they seem to be performing updates of some short.
*Request can you please post that 3024 prl?
JD

JD2589 said:
Hey,
Your MMS may not be working due to problems MetroPCS is having with their towers they seem to be performing updates of some short.
*Request can you please post that 3024 prl?
JD
Click to expand...
Click to collapse
Sure man, just give me your email and I'll send it you so you could post it. For some reason it's not letting post it on here lol.
Sent from my PC36100 using XDA App

Have 3g working in Atlanta area with 3024 prl...seems to browse web ok but speedtest won't run as someone else mentioned. Coverage seems poor...I live close to the city and keeps switching back to 1x at my apartment. Stays connected to 3g at my work in Norcross.

Epic 4G touch - text/talk/1Gb of web 55$ ,PAGEPLUS

Hey guys, I've had a motorolla droid X on pageplus with the 40$ plan.
It has talk/text/ and 20mb of web. But they just released a 55$ plan with talk text and 1gb of data. Pageplus is the verizon network.
I gave them my E4GT Hex code and they said the phone was eligible. ( its great that they take sprint phones )
For those of you who don't want to flash the samsung incognito esn, just to get on boost mobile this is a great substitute. Especially if, you prefer verizon towers and dont mind a cap on your data... I dont use that much (yet).
check it out >>
https://www.pagepluscellular.com/Online Store/Minutes/55 Plan Card.aspx

that's good news! I'm thinking about in buying a new samsung galaxy s2 epic 4g White model for sprint that I'm gonna flash to page plus, Do you think it will work on page plus? because the white is a new model so I'm not sure if it will work, and if it work do i have to flash it or all i need to do is give the esn or hex to pageplus and they will activate it? Please answerrrr me Thanksssssss.....

1GB is a joke, I'm at 3GB with 20 days left on billing cycle. How do people manage to have a E4GT without unlimited is crazy.

lexvdub1 said:
1GB is a joke, I'm at 3GB with 20 days left on billing cycle. How do people manage to have a E4GT without unlimited is crazy.
Click to expand...
Click to collapse
That's okay... I see you saying you used 3GB in 10 days, and think you are crazy.
I am on wifi at home, so no data use there. And at work, I'm on wifi, so no data use there. Even if I didn't have wifi, I don't see how I would use that much data at work, since there is a radio or PC for streaming music.
What do you do to use that much data?

I don't work behind a desk , so i have to use my phone as a pc.
Here's a pic of my usage.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here's my friends Iphone, he's on my plan.
I've seen post on this website where people are using 16gb+, so i thought my usage was moderate.

Voice and text WORK
Here's what im working on with 3g.
zaping18 said:
I flashed using the Same instructions used for the HTC HERO
EVO to PagePlus
By KrInEn
Software needed
• CDMA workshop 3.5.5 or 2.7 (3.5.5 prefered)
• QPST 2.7 build 323
• HTC Sync
• Diag Drivers (may be included in HTC SYNC)
Marketplace Apps needed
• APN Backup & Restore
• Droid Wall (recommended for data restrictions, must have ROOT)
THIS TUTURAL IS ASSUMING THAT YOU ARE ALREADY BASIC FLASHED!
If you are NOT basic flashed, PM me and we can work something out with remotely flashing your phone and activating it on Page plus.
Ok, so first things first, install QPST, Workshop, and all drivers. Now you will need your SPC/MSL code. So;
STEP 1: SPC/MSL Code
Plug in your phone to your PC, when prompted choose “Just Charge”. Open the Dialer and dial ##3424#, this should bring up a black screen with a modem phone etc. You are now in DIAG mode, if your PC prompts please install the diag drivers at this point. Screen should look like this:
Ok, we are in diag mode, now go into your device manager and take note what COM port your phone is on.
Now open up CDMA workshop. For those of you using 3.5.5 this should be cake.
3.5.5 Users ONLY:
Connect to your phone and read it. I will not post any pictures because if you have 3.5.5 paid I am sure you know how to do this. Click on security and then in the SPC section click the drop down box to “HTC Method” and click read. Once it reads your 6 digit MSL click send, should say ‘Phone unlocked”. Click SPC and then “write 000000”, Tada you are done.
2.7 Users:
Ok same as above connect to your phone and read it. Click on Security then under SPC where it says “Default Method” change it to “Universal RAM Method”. Then click read, you should get a box like this;
Set it just as shown above, and then click Ok. Sit back this will take a while. You will then get a list of 30 – 40 possible SPC codes. Start pumping the 6 digit codes in here one by one until you get “phone unlocked”
When you see “phone unlocked” change the 6 digits to all 0’s and click SPC then Write. Congratulations SPC section DONE!
STEP 2: Programming
With your phone still connected and in DIAG mode. Go to Start > Programs > QPST > QPST Configuration. Should look something like this (minus all of the ports)
Click on “Add New Port”
Uncheck “Show Serial and USB/QC Diagnostic ports only” you should now see the port your phone is on, double click it. Your phone should now show up on that first screen. Now click on “start clients” then “service programming”. You should be greeted by this;
Click OK and here we go.
Click “Read from Phone”
Click OK, once it is done reading using the arrows at the top right, scroll right until you see M.IP and PPP Config.
Click on M.IP first
Change Mobile IP Behavior to “Simple IP only” and click on Profile 2.
Make it look just like ^ but have your 10digit MDN in front of the “@” signs. HA Shared Secret and AAA Secret both click on Enter text string and type in “vzw” (without the quotes). Then click OK.
Click on PPP Config
Click on Um and change “user name” to “[email protected]” Change Tethered NAI to “[email protected]” Change password to “vzw”. Click on AN set user name to “[email protected]” and password to “vzw”.
You are done, click write to phone.
Step 3: MMS
This is done on the phone. This will be short and sweet, if you made it this far this will be cake.
-Download APN backup&restore from the marketplace.
- Open APN Backup
- Click BACKUP APN'S!
- Download this file http://www.megaupload.com/?d=46FKCYV0 <<<< LINK IS DEAD
- Mount phone as disk drive
- Copy file to apnbackup folder
- Unmount phone
- Turn on airplane mode
- Open APN backup
- Delete APN's
- Restore APN's (select EVO pageplus file)
- Turn off airplane mode
- Reboot
There you have it, full flashed. If 3G is spotty try flashing a NON EVDO PRL to the phone.
This tutorial is FREE, if you want to donate to future endeavors, or just want to buy me a beer.
Paypal: [email protected]
Click to expand...
Click to collapse
I'm having trouble getting it to work though.
( There is also a write up here with PRL files and a word DOC with screen shots for more information. )
- I changed Profile 1 in QPST when I first tried this out through the phones data programming menu. by typing ##DATA#
I got data settings from kitty wireless right here>>
http://www.kittywireless.com/pageplus/pageplusmanualprogramming.html
Code:
Primary Proxy Address ppcgw1.vzwreseller.com
Secondary Proxy Address ppcgw2.vzwreseller.com
Primary Port 8080
Primary LXL Port 443
Secondary Port 8080
Secondary LXL Port 443
User Password vzw
Homepage http://homepage
- Profile 2 is on the settings in the write up at the top of the page. I think I might be doing something wrong with profile 1, cause i didnt know what I was doing when I set those settings. But 2 doesnt work either. I'm going to figure this all out in the next few days though. :0)
*I'm going to post screen shots of QPST when I have more details. *
*AS OF NOW I HAVENT GOTTEN THIS TO WORK, LET ME CONFIRM EVERYTHING FIRST BEFORE YOU TRY THIS.*

3g DATA, TALK, and TEXT WORKING
a more comprhensive write-up for the epic 4g is coming soon.
Now if only I could get 4G then I'm really winning. But I may instead just switch to boost for that

toussant said:
3g DATA, TALK, and TEXT WORKING
a more comprhensive write-up for the epic 4g is coming soon.
Click to expand...
Click to collapse
I made epic 4g to work on pageplus only for voice and text. I'm looking forward for your instructions to configure 3g data.
Also the epic alwayse shows as roming for some strange reasons. Any help on that would be appreciated.
Thanks.

1XRTT Reply
toussant said:
3g DATA, TALK, and TEXT WORKING
a more comprhensive write-up for the epic 4g is coming soon.
Now if only I could get 4G then I'm really winning. But I may instead just switch to boost for that
Click to expand...
Click to collapse
Thanks, we're looking forward to getting proper EvDo working on our machines.
- 2B

I have heard about it. Is it difficult to switch your carrier? I currently use Boost Mobile and had someone flash it for me. I would prefer to do the flash myself just to save money.

CARRIER Reply
cocoapapi said:
I have heard about it. Is it difficult to switch your carrier? I currently use Boost Mobile and had someone flash it for me. I would prefer to do the flash myself just to save money.
Click to expand...
Click to collapse
People say "flash" to avoid the "change ESN" term that seems to perk up trolls like live flesh attracts walkers. If you've got a normal Samsung Epic, I'd encourage you to check out this nearly comprehensive guide (things can be a little dicey in the "data" step, and you'll have to force 1xRTT on the phone end until somebody can figure out how to get EvDo working - also, I'd use a more up to date PRL if you can find one):
https://docs.google.com/document/d/1E4nNITQnzEoEkkVp4j7k_N_yghvNh_SozuKe3az_Nx4/edit?hl=en_US
- 2 Bunny

I've heard you can get 3G if you can pull the DMU
keys from a working verizon phone. I have a Droid D X sitting around
if anyone can confirm this please reply.
Right now I'm running 1X and I hate it. I may flash to boost if I can overcome the hassle. might be worth it to me.

ADVICE Reply
toussant said:
Right now I'm running 1X and I hate it. I may flash to boost if I can overcome the hassle. might be worth it to me.
Click to expand...
Click to collapse
Trust me - It's NOT. Boost Mobile sucks big time and PagePlus is a miracle in comparison, even with their 1xRTT data. I actually ended up switching back to Sprint's legendary $30 a month unlimited data plan and have never looked back to Boost's sickly plans or PagePlus's mediocre amounts of included data (and lack of roaming on Sprint). Whatever you do, do NOT go to Boost.
- 2 Bunny

kainppc6700 said:
Trust me - It's NOT. Boost Mobile sucks big time and PagePlus is a miracle in comparison, even with their 1xRTT data. I actually ended up switching back to Sprint's legendary $30 a month unlimited data plan and have never looked back to Boost's sickly plans or PagePlus's mediocre amounts of included data (and lack of roaming on Sprint). Whatever you do, do NOT go to Boost.
- 2 Bunny
Click to expand...
Click to collapse
I'm on boost and I get fast 3g on the 40 unlimited plan. I think its worth it
Sent from my SPH-D710 using Tapatalk 2 Beta-5

timer1 said:
I'm on boost and I get fast 3g on the 40 unlimited plan. I think its worth it
Sent from my SPH-D710 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
But you had to pay an outrageous $50 a month for a while to get that. If you're gonna pay a Sprint MVNO for unlimited data without roaming, at least try Virgin Mobile since their unlimited is $35 (still no roaming though) right off the bat.
- 2B

kainppc6700 said:
But you had to pay an outrageous $50 a month for a while to get that. If you're gonna pay a Sprint MVNO for unlimited data without roaming, at least try Virgin Mobile since their unlimited is $35 (still no roaming though) right off the bat.
- 2B
Click to expand...
Click to collapse
Ur right I did have to pay 50 for six months but I still get good service.
Sent from my SPH-D710 using Tapatalk 2 Beta-5

The MVNO I use - KDDI Mobile - has a similar plan for single phone users:
500 "Anytime" minutes
Free nights & weekends
Unlimited text & web
$69.99 /mo
The added benefit is for those who call Japan - free landline calls in the "Anytime" minutes.
Phone is stock Sprint and behaves just like a Sprint phone, which is why I jumped on the E4GT. Our family plan + unlimited web for my phone is still only about $140 for 1000 minutes.... and it's unlikely that we'll exceed that again anytime soon.

garwynn said:
The MVNO I use - KDDI Mobile - has a similar plan for single phone users:
500 "Anytime" minutes
Free nights & weekends
Unlimited text & web
$69.99 /mo
The added benefit is for those who call Japan - free landline calls in the "Anytime" minutes.
Phone is stock Sprint and behaves just like a Sprint phone, which is why I jumped on the E4GT. Our family plan + unlimited web for my phone is still only about $140 for 1000 minutes.... and it's unlikely that we'll exceed that again anytime soon.
Click to expand...
Click to collapse
That's even worse. I actually do the Sprint SERO thing and get everything you're talking about for $30 - plus free roaming. Outside of Sprint SERO, only Virgin Mobile or TMobile has a good affordable data plan (unfortunately, they operate only on inferior GSM devices and have worse coverage than Sprint).
- 2 Bunny

Those of you using Page Plus on your Epic 4G Touch, are you having problems with dropped calls?

toussant said:
Voice and text WORK
Here's what im working on with 3g.
I'm having trouble getting it to work though.
( There is also a write up here with PRL files and a word DOC with screen shots for more information. )
- I changed Profile 1 in QPST when I first tried this out through the phones data programming menu. by typing ##DATA#
I got data settings from kitty wireless right here>>
http://www.kittywireless.com/pageplus/pageplusmanualprogramming.html
Code:
Primary Proxy Address ppcgw1.vzwreseller.com
Secondary Proxy Address ppcgw2.vzwreseller.com
Primary Port 8080
Primary LXL Port 443
Secondary Port 8080
Secondary LXL Port 443
User Password vzw
Homepage http://homepage
- Profile 2 is on the settings in the write up at the top of the page. I think I might be doing something wrong with profile 1, cause i didnt know what I was doing when I set those settings. But 2 doesnt work either. I'm going to figure this all out in the next few days though. :0)
*I'm going to post screen shots of QPST when I have more details. *
*AS OF NOW I HAVENT GOTTEN THIS TO WORK, LET ME CONFIRM EVERYTHING FIRST BEFORE YOU TRY THIS.*
Click to expand...
Click to collapse
anyway someone could help me with this when I get an sg2? please?

Unstable HSPDA/3G connection

Hello,
I have a Sony Xperia Arc S with the following configuration:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The preferred network type is "WCDMA preferred
My HSPDA/3G is not working properly.
I'm not sure I have 3g cause it's always saying 'H'.
But that's not the problem. the speed is good enough for me.
The problem is that when i use my 'mobile internet'.
It most of the times load 1 or 2 pages en then it said "Verification with proxyserver failed" or just "page not found".
or sometimes a lot of missing images on webpages, same problem with another browser (I tried Dolphin), and a lot of disconnects with facebook.
Sometimes it happends with the Play Store (market) to.
On wifi there's no problem at all.
I had another rom before (Sorry, can't remember the name) but it was also Android 4.04 with Arknight Kernel and that gave me exactly the same problem.
I did a full system/data/cache/wipe.
Now I use JJhybrid Rom v3.2 With kernel: 2.6.32 9-Doomkernel #5.
I also tried the ping-test I found in in thread:
http://forum.xda-developers.com/showthread.php?t=660627
But that gives no errors.
It's also NOT a sim-card problem.
I swapped sim cards with a friend and in his phone everything works just fine (not an Arc S)
With his sim-card in my phone. still the same problem.
I also went to my provider and they tried with their sim-card en checked the apn settings.
I also tried flashing different basebands .36 .64 .70 .72 and now on .73 but that makes no difference.
It looks like on 2G everything is working just fine (but it's so sloooow).
I also searched XDA en the internet but I cannot find someone with an SE Xperia Arc S to have this problem.
The weird thing about this, is that a collegue of me also has an Arc S with the same problem.
That arc s is using official SE 4.0.4 ROM (I don't know the exact build, cause the phone is not here).
These phones were bought in a different store with about 3-4 months between them.
Is there something I did wrong with flashing? or something else? Or is this probably a hardware problem?
For the rest, is the phone working great, no other problems at all, no signal loss or stuff.
This problem appeared suddenly, from 1 day to another.
I live in belgium and my carrier (provider) is 'mobistar'.
Thanks in advance!
with kind regards,
Jo

H stands for HSPA, High-Speed Packet Access.
HSPA is 3,5G which is faster version of 3G(UMTS).
HSPA consists of HSDPA and HSUPA, High-Speed Download/Upload Packet Access.
If you see H, then your mobile internet is working correctly.

Someguyfromhell said:
H stands for HSPA, High-Speed Packet Access.
HSPA is 3,5G which is faster version of 3G(UMTS).
HSPA consists of HSDPA and HSUPA, High-Speed Download/Upload Packet Access.
If you see H, then your mobile internet is working correctly.
Click to expand...
Click to collapse
Hello,
Thank you for your reply,
I did'nt know that HSDA is faster then 3G.
Thank you for clearing that up for me, but that is'nt the problem,
my mobile internet is working, but definately not correctly.
The problem is that when i use my 'mobile internet'.
It most of the times load 1 or 2 pages en then it said "Verification with proxyserver failed" or just "page not found".
or sometimes a lot of missing images on webpages, same problem with another browser (I tried Dolphin), and a lot of disconnects with facebook.
Sometimes it happends with the Play Store (market) to.
Click to expand...
Click to collapse
That is the problem.

I removed proxy from APN settings, and it helped me with market issues (it wouldnt download sometimes). Im using Simobil Vodafone and since proxy was only used to access Vodafone Live!, its quite unnecessery.
to do that, go to Settings > Wireless & networks > more > Mobile networks > Acces Point Names (APNs)
click on the one you use for internet, write down the proxy (in case you need it again), and just remove it. Menu > save, and youre good to go.
If your SP is one of those who block editing APNs, create a new one, and copy everything except proxy.
Im not saying this is sure fix, but since you get proxy errors, removing it may help.
I presume everything is okay on wifi, right?

issak42 said:
I removed proxy from APN settings, and it helped me with market issues (it wouldnt download sometimes). Im using Simobil Vodafone and since proxy was only used to access Vodafone Live!, its quite unnecessery.
to do that, go to Settings > Wireless & networks > more > Mobile networks > Acces Point Names (APNs)
click on the one you use for internet, write down the proxy (in case you need it again), and just remove it. Menu > save, and youre good to go.
If your SP is one of those who block editing APNs, create a new one, and copy everything except proxy.
Im not saying this is sure fix, but since you get proxy errors, removing it may help.
I presume everything is okay on wifi, right?
Click to expand...
Click to collapse
Thanks a lot! that just solved my problem.
I went multiple times to my carrier shop (mobistar) and they configured a couple of times.
I called about 5 times my customer service and they always told me to put an ip-adress bij PROXY.
I just called my customer service again, to check with them again, and now suddenly they say there have to be nothing in proxy.
Thank you so much for solving my problem!!
have a nice day

issak42 said:
I removed proxy from APN settings, and it helped me with market issues (it wouldnt download sometimes). Im using Simobil Vodafone and since proxy was only used to access Vodafone Live!, its quite unnecessery.
to do that, go to Settings > Wireless & networks > more > Mobile networks > Acces Point Names (APNs)
click on the one you use for internet, write down the proxy (in case you need it again), and just remove it. Menu > save, and youre good to go.
If your SP is one of those who block editing APNs, create a new one, and copy everything except proxy.
Im not saying this is sure fix, but since you get proxy errors, removing it may help.
I presume everything is okay on wifi, right?
Click to expand...
Click to collapse
Man, thank you! I was losing hope to find the cause for my poor 3g performance and it seems this fixed it.

No 3G only 1x - Cloned ESN Swap

Okay, I have a GS3. I swapped the ESN (Evo 4G) and now I can't get 3G
The only time I have 3G is on a stock Rom with the MD4 Modem but even than it feels like 1x.
I've tried all the radios, with no luck including the MD4 one. I've been trying to get it working the past two days now with no luck.
Someone PLEASE, please PLEASE help me?

mac19124 said:
Okay, I have a GS3. I swapped the ESN (Evo 4G) and now I can't get 3G
The only time I have 3G is on a stock Rom with the MD4 Modem but even than it feels like 1x.
I've tried all the radios, with no luck including the MD4 one. I've been trying to get it working the past two days now with no luck.
Someone PLEASE, please PLEASE help me?
Click to expand...
Click to collapse
do you have the MSL? Try going to ##data# and making sure everything is set up correctly and even doing a ##debug# and see whats going on there.Make sure you have your radio set to cdma/lte/evdo

Apeleon said:
do you have the MSL? Try going to ##data# and making sure everything is set up correctly and even doing a ##debug# and see whats going on there.Make sure you have your radio set to cdma/lte/evdo
Click to expand...
Click to collapse
I do have the MSL
I'm not exactly sure what I should be seeing in the Data menu, but I have gone in there a few times turning things on and off to try and get things working, otherwise I switch is back to default.

Okay,I can try to help for what I know,what was the purpose of you cloning the esn?

Apeleon said:
Okay,I can try to help for what I know,what was the purpose of you cloning the esn?
Click to expand...
Click to collapse
My uncle's names on our account and I payed my portion of the bill, he decided to quite halfway through the contract so I cloned it to get back on Sprint.
Any help you can give me is much appreciated. I can't stand this 1x :/

Does anyone think it could have anything to do with the donor phone?

mac19124 said:
Does anyone think it could have anything to do with the donor phone?
Click to expand...
Click to collapse
Im not on sprint, but what does it show as the Mobile network type under Settings: About Device: Mobile network type?
I was messing with my phone and had changed the settings in ##DATA#
I was getting 1x only so I had to change the HDR/1x Selection under Data: Others. Hybrid works the best for me, but you could try changing to "LTE + CDMA + EVDO Mode. When I selected CDMA only then it only got 1x and not full EVDO/3g.
If that's not it did you have to enter the HA & AAA secret keys to get data to work?

showcasemodr said:
Im not on sprint, but what does it show as the Mobile network type under Settings: About Device: Mobile network type?
I was messing with my phone and had changed the settings in ##DATA#
I was getting 1x only so I had to change the HDR/1x Selection under Data: Others. Hybrid works the best for me, but you could try changing to "LTE + CDMA + EVDO Mode. When I selected CDMA only then it only got 1x and not full EVDO/3g.
If that's not it did you have to enter the HA & AAA secret keys to get data to work?
Click to expand...
Click to collapse
Earlier OP said he is not sure what he should be doing is ##data# menu, maybe I can break it down
Do ##data# on dialer
click on edit
type in msl
enter in 6 digit MSL
**To Enter HDR/1x Selection Stated Above**
Select Other > Select HDR/1X Selection > Select Mode( Try LTE + CDMA + EvDO, if that doesnt work try hybrid or global mode)
Just browse the data menu but do not touch korean mode ever.
for HA and AAA Keys noted aboved its within the Data Profile in the menu of MSL,
let us know if this helps,going to be honest I am a noob but I can research these things as I have been doing so passively trying to fix my own problem

Thanks for the help guys. I was messing around the other day in the settings and somehow wiped my username and MSID. I got the username back, now I'm trying to get the MSID so i can get my phone back on Sprint. I"m an idiot sometimes... lol
As soon as I get back on Sprint I'll let you know how it works out!
Thanks again

To get msin you can just do phone activation through menu and if that doesn't work a sleight tech can provide a new one
Sent from my SPH-L710 using xda app-developers app