Develop Bugs

EVO 4G - Revol Wireless Data Settings

Could anyone please tell me what the settings to get data working on my evo with revol wireless? Any help would be appreciated.
Had the phone flashed to revol and everything including data 3g worked then data stopped and I receive error 67 wrong username and password.
I was able to get into the settings using ##3282# and everything is set up for sprint PCS. I need the settings for Revol.
I also emailed Revol and they will only support data on phones they sold and will not give me the information for a flashed phone.
Thanks

who the hell is revol?

revol.com - Its a cell provider in Ohio Pensilvania Kentucky and indiana - $40.00 month unlimited text talk and web

Does anyone have any information - Any Help would be appreciated
Thanks

please dont tell me you bought an evo to use on a network that doesnt even support the evo, nor the phone support them?
its not ad easy as a couple of settings... you got work ahead of you.
i would start by reading the evo on metropcs threads, and the cricket threads and see if anything there will help you.
Sent from my PC36100 using XDA App

how did you flash to revol...

3G on Revol
The hard part is getting the codes for the 3g revol data. Does ANYONE know how to do that?!?
Oh and how would you go about either changing an ESN (if its even possible) or putting the ESN into Revols database? They cant connect it without the ESN active in their system right?
Also codes for a Droid X i noticed were a little different (and I know this works), it may be different though for a Droid X2, however it's probably the same.
For 1x:
1. Connect Phone Via QPST and open Service Programming. (like above)
2. Once you have began Programming, click "Read From Phone". It will ask you for an SPC/MSL code. That code should now be six zeros (000000).
3. Click M.IP and set Mobile IP Behavior as MOB + Simp...
4. Select any profiles (there should be 1 or 2) listed under User Profiles, and click edit. Do the following for all profiles.
5. Make sure that "Profile enabled" is checked and enter in the following:
NAI: [email protected]
Tethered NAI: [email protected]
6. Change home address, primary HA, and secondary to read "255" in every available slot. Example: "Home address: 255.255.255.255"
7. On both HA Shared and AAA Shared Secret, make sure "Retain Last Value" is selected
8. Change MN-HA SPI to 12C and MN-AAA SPI to 2.
9. click ok
10. Do for all profiles
11. Set active user as 0.
12. Click PPP Config
13. The "Um" Button
14. Under user ID enter [email protected] as well as for tethered NAI. If a text box is black with red lines in it, click it and press ctrl D. Enter revol in the password box.
15.Click "AN" Button and repeat step 12.
16. Click "write to phone". Ignore any errors that occur.
17. Phone will reboot and it will be completed!
18. ENJOY!
And revol.epic could you try to explain the MMS settings a little more i get confused ill open the xml in dreamweaver or notepad and i see nothing about "production" in step 5? could you give me the stap by step for notepad and then just quote word for word whatever the document is? Thanks.
Please answer my first 2 questions if you know the answer!

try these cause my internet and mms work
dial ##3228#
then edit passcode is 000000
change values as follows:
under data profile:
user name:10digit [email protected]
home address:0.0.0.0,
primary HA:10.2.1.15,
secondary HA to 10.2.1.16.
On both HA Shared and AAA Shared Secret:revol
MN-HA SPI: 12C and MN-AAA SPI: 2.
under the advanced tab:
Slot Cycle Index:0 can leave as default but changing this to 0 will let you get messages and calls faster
MCC:310
MNC:00
ACCOLC:2
Vocode disable
Home Orig:Voice 13k also can leave as default but voice 13k is way better than EVRC or anything else
Roam Orig:Voice 13k
LBS PDE IP: Blank
LBS PDE Port: BLANK
Home Sys Reg:enable
Foreign SID reg:enable
DDTM:disable
Home SID/NID#1:4139/65535
at the bottom of advanced tab is rtsp/http:
set both proxy ip to :0.0.0.0
set both ports to : 0
also in the messaging app:
go to connection settings:
name should be: Production
mmsc: http://mms.revol.us/revol/mms.php
port and proxy: (not set)
protocol: WAP 2.0
if you cant edit these in the app its self then you can use APN backup and restore(in the market for free) ben restore the apn and your all set.
Not sure if all this is necessary but my mms works perfectly and i have slightly better internet speeds.

saprano614 said:
try these cause my internet and mms work
dial ##3228#
then edit passcode is 000000
change values as follows:
under data profile:
user name:10digit [email protected]
home address:0.0.0.0,
primary HA:10.2.1.15,
secondary HA to 10.2.1.16.
On both HA Shared and AAA Shared Secret:revol
MN-HA SPI: 12C and MN-AAA SPI: 2.
under the advanced tab:
Slot Cycle Index:0 can leave as default but changing this to 0 will let you get messages and calls faster
MCC:310
MNC:00
ACCOLC:2
Vocode disable
Home Orig:Voice 13k also can leave as default but voice 13k is way better than EVRC or anything else
Roam Orig:Voice 13k
LBS PDE IP: Blank
LBS PDE Port: BLANK
Home Sys Reg:enable
Foreign SID reg:enable
DDTM:disable
Home SID/NID#1:4139/65535
at the bottom of advanced tab is rtsp/http:
set both proxy ip to :0.0.0.0
set both ports to : 0
also in the messaging app:
go to connection settings:
name should be: Production
mmsc: http://mms.revol.us/revol/mms.php
port and proxy: (not set)
protocol: WAP 2.0
if you cant edit these in the app its self then you can use APN backup and restore(in the market for free) ben restore the apn and your all set.
Not sure if all this is necessary but my mms works perfectly and i have slightly better internet speeds.
Click to expand...
Click to collapse
Did anyone manager to get this working?
I inputted the setting and got 3g to show up but after resetting the phone. Nothing. The settings wont stick.

In qpst change your msl password. I had the settings sometimes revert and that seemed to stop it.
Sent from my PG86100 using xda app-developers app

jlmancuso said:
In qpst change your msl password. I had the settings sometimes revert and that seemed to stop it.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Do you have any idea how to get the ha and aaa passwords off a zte n850?
I have talk text and 1x.
3g shows up time to time but doesnt work.
Ive tried revol, revolwireless, secret
Im out of ideas.
I tried alogcat while being in ##data#
Tried dsf tools, cdma ws, qpst (nvm folders locked!), qdxm.
Ive managed to get it rooted on my own.
Wrote up a guide in my sig.
Is there anyway I can use root to allow me to get thoseS?

Cjen1987 said:
Do you have any idea how to get the ha and aaa passwords off a zte n850?
I have talk text and 1x.
3g shows up time to time but doesnt work.
Ive tried revol, revolwireless, secret
Im out of ideas.
I tried alogcat while being in ##data#
Tried dsf tools, cdma ws, qpst (nvm folders locked!), qdxm.
Ive managed to get it rooted on my own.
Wrote up a guide in my sig.
Is there anyway I can use root to allow me to get thoseS?
Click to expand...
Click to collapse
to gain access to nvm folders create a folder in the root of your efs called opensesame save it then reboot phone and you should now have access to your nvm but be very very careful. Before you change any files in your efs make a backup of it first because you can cause real damage and brick your device.

Thanks I'll try it out soon. Don't worry u know my way around the nvm folder. I've flashed like 5 thunderbolts in my day ha.
I'll let you know if it works. Should there be space between the words like the thunderbolt?
---------- Post added at 07:00 PM ---------- Previous post was at 06:36 PM ----------
jlmancuso said:
to gain access to nvm folders create a folder in the root of your efs called opensesame save it then reboot phone and you should now have access to your nvm but be very very careful. Before you change any files in your efs make a backup of it first because you can cause real damage and brick your device.
Click to expand...
Click to collapse
Yeah it didn't work. I tried
opensesame
open sesame door
open sesame
opensesamedoor
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

anyone?

To get 3g go here:
http://z4cellforums.webs.com/apps/forums/topics/show/8667356-samsung-galaxy-s3-flashed-to-revol-wireless-plus-root
Use straight talks prls for better 3g.
Use dfs tools.

tron360 said:
Could anyone please tell me what the settings to get data working on my evo with revol wireless? Any help would be appreciated.
Had the phone flashed to revol and everything including data 3g worked then data stopped and I receive error 67 wrong username and password.
I was able to get into the settings using ##3282# and everything is set up for sprint PCS. I need the settings for Revol.
I also emailed Revol and they will only support data on phones they sold and will not give me the information for a flashed phone.
Thanks
Click to expand...
Click to collapse
all the software to flash with this will help:
http://kickass.to/android-network-flashing-kit-v-1-2-2013-zip-t8237851.html#main

htc evo reading VERIZON with metro prl

My HTC Evo is reading Verizon wireless when y dial *228 to set up the device.
the problem is I have used the metropcs prl - 0069/02001/02004 and 03011 and no matter what, it stays in roaming "Analog B" and doesnt go to metro.
Sometimes get some american blabla network.
Phone is rooted and with metrodroid 1.2
The cyanogen doesnt give me option to go to ##3424# or ##3282#
And not getting into ##775# at all.
Some help would be appreciated
the ESN is added to metropcs inventory and with a working phone number.
Need it really bad.
thanks

Double check to make sure the Metro PCS PRL sticks. Go to Settings > About Phone > Status and look under PRL.
Also, check to see if your number shows up under "My phone number."

omgar said:
Double check to make sure the Metro PCS PRL sticks. Go to Settings > About Phone > Status and look under PRL.
Also, check to see if your number shows up under "My phone number."
Click to expand...
Click to collapse
Settings as follow,,,
Phone number - Correct XXX-XXX-XXXX
Current username - [email protected]
Android 2.2 version
Baseband 2.15.00.07.28
Build Number - MetroDroid 1.2
PRI Version 1.77_003
PRL 02004
if more info is needed, let me know

That's strange. How about under MIN? There should be a number that looks like a phone number there.
You could also try going to the Sprint OTA and *228 from there

omgar said:
That's strange. How about under MIN? There should be a number that looks like a phone number there.
You could also try going to the Sprint OTA and *228 from there
Click to expand...
Click to collapse
result from ##3282# /Advanced
MSID show my phone number
Home SID/NID#1 4139/65535
MMS Seerver URL htt://mms.metropcs.net:3128/mmsc
RTSP Proxy Port 554
RTSP Proxy Address rtsp.vog.sprintpcs.com
HTTP PD Proxy Port 8085
HTTP PD Proxy Address pd.vog.sprintpcs.com

I cannot find MIN here,,, i dont have any more account for EVO on sprint... for OTA
And when I dial *228 from the cell, verizon comes up to update or register the phone...LOL

Metro has a roaming agreement with verizon. When in one of these roaming zones or sometimes when metro is doing some system maintenance this scenario you describe will occur. When you leave that roaming zone or metro finishes with their system maintenance, whatever the case. Your phone should then just go back to working as before.

chainsaw5001 said:
Metro has a roaming agreement with verizon. When in one of these roaming zones or sometimes when metro is doing some system maintenance this scenario you describe will occur. When you leave that roaming zone or metro finishes with their system maintenance, whatever the case. Your phone should then just go back to working as before.
Click to expand...
Click to collapse
Im located in Queen-NY where there is pretty good metropcs coverage,
This is a fresh flashing, has not yet work on metro, Im still trying to get to work.
I've been trying to set it up for 4 days in a roll and its given me only headaches ..lol...
that's why I really need help here.... I have tried few ROM's but it seens to not help at all,,,
Let me ask, is that normal when I go back to QPST -> PPP Config
the Password field be empty? or should there be something that was set before?
Is the prl file to be uploaded to ROAM tab right?
what prl have anybody up running on evo metro?

The EVO will not work on NY. Since there is not PCS band in NY
NY,NJ and some others states only use AWS band which is a new frecuency band not supported by the EVO,
thats why you're on roaming, your EVO can't see any metro network even if you have the latest metro PRL
Sent from my PC36100 using XDA App

jogitoxxx said:
The EVO will not work on NY. Since there is not PCS band in NY
NY,NJ and some others states only use AWS band which is a new frecuency band not supported by the EVO,
thats why you're on roaming, your EVO can't see any metro network even if you have the latest metro PRL
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
So, what you mean, I just gotta go to a metropcs area and set up the phone then come back to my area?
will that work?

You're right, Dual bands cellphones will not work on metropcs NY are...
So what about virgin or cricket in NY...?
will they work if flashed over to them?

i am having the same problem with the analog b roaming problem and im in the dallas area. it goes back and forth between roaming and not and when it says im in roaming it wont let me make calls but i can still send and receive sms texts

Im actually in Texas and its doing thr same thing it says analog b and i could only send and receive texts. Need help asap prl is 2400
Sent from my PC36100 using XDA App

I'm in north jersey. found another formus with lists of prls
MetroPCS most current PRL'S
01004 - non-evdo updated
h t t p :// dc203.4shared.com/download/22...429f/01004.prl
02004 - EVDO
h t t p :// dc146.4shared.com/download/21...b5d9/02004.prl
03010 - AWS updated
h t t p :// dc169.4shared.com/download/22...23b3/03010.prl
HOWEVER!!! none of them work on my htc evo 4g I get absolutely no signal. (flashing evo to metro here) and metro service is flawless in my area. it'll get spotty when I drive around but in my home. on my normal metro phone I have full bars. this is my last step before this phone is completely flashed what to do???

sorry to bring a dead thread back to life
but its not working for me either and i have cloned the esn of my huawei ascend into my Evo yet nothing. is still in Analog B

[Q] Galaxy Nexus i9250M Not working with Mobilicity

Hey I just picked up the GN i9250M (bell) and inserted my mobilicity sim but it says it cant connect to the network. Im assuming this is because I need to unlock the phone. Is that correct?
If that is correct to unlock the phone I need the SDK files and grabboot? can someone direct me to a tutorial on this?

What is the exact error message? You don't see any signal bars at all or is it just when you try to use data? The phone should be unlocked already. Most likely it's the data that can't connect, check your APN settings.

the error message was "cannot connect to the network at this time please try again later"
thanks for the quick response and sorry for wasting everyones time...not sure why this happened but once i walked into my house it connected..possibly just out of coverage area. up/down links seem to be working fine and calls can be made so im happy.

actually im having another issue now..dont know if i can ask it in this thread but whenever i try to download something frm the market i get a cannot download due to an error message...any ideas?
thanks again

trilogee said:
actually im having another issue now..dont know if i can ask it in this thread but whenever i try to download something frm the market i get a cannot download due to an error message...any ideas?
thanks again
Click to expand...
Click to collapse
Wifi or network? There are posts that say you should go to your APN settings and delete the proxy so that it's empty.

that was my first troubleshooting step but oddly enough the issue is only intermittent with wifi...some apps dl some dont, same issue now occur on network

hmm issue seems to be isolated to network connection now...what was the apn thing you mentioned?
can also confirm that connection is active and functional; browser and other apps working fine

In Settings -> click more under wireless & Networks -> Mobile Networks -> Access Point Names
You should see one or two APNs. click on them and make sure that Proxy is blank or "not set"

Bell runs an HSPDA network and Mobilicity runs an AWS network. You cant use the phone on Mobilicity's network.

OversizedBass said:
Bell runs an HSPDA network and Mobilicity runs an AWS network. You cant use the phone on Mobilicity's network.
Click to expand...
Click to collapse
Yes, you can use it. It will work fine. SGN is pentaband and unlocked. Just make sure your APNs are correct.

Sorry, I was going off the specs at GSMArena (which are wrong more often than right nowadays)

OversizedBass said:
Sorry, I was going off the specs at GSMArena (which are wrong more often than right nowadays)
Click to expand...
Click to collapse
I just got the same exact phone.
Go remove the proxy address in the APN settings. and the reason it didn't connect at first because the phone was trying to "learn" how to connect to the Mobilicity. network.
I thought my phone was defective as well until I waited a bit after. It's a beautiful device

wilsonlam97 said:
I just got the same exact phone.
Go remove the proxy address in the APN settings. and the reason it didn't connect at first because the phone was trying to "learn" how to connect to the Mobilicity. network.
I thought my phone was defective as well until I waited a bit after. It's a beautiful device
Click to expand...
Click to collapse
so does it work perfectly with mobilicity?
im gonna buy this phone soon

trilogee said:
hmm issue seems to be isolated to network connection now...what was the apn thing you mentioned?
can also confirm that connection is active and functional; browser and other apps working fine
Click to expand...
Click to collapse
I ripped these from mobilicitys support section of their site and copied and pasted them verbose. I've yet to procure my GN to test them with so any modifications or sugguestions are welcome.
mobilicity apn
STEP 1: Go to Settings > Wireless & Network > Mobile Network >Access Point Names
STEP 2: Press the ‘Menu’ button and then select create ‘New APN’
STEP 3: Populate the following fields:
Name: MOWAP
APN: wap.davewireless.com
Proxy: 10.100.3.4
Port: 8080
MCC: 302
MNC: 320
APN type: default
STEP 4: Save
Please note: Other fields can be left blank
To create an APN for MMS
STEP 1: Go to Settings > Wireless & Network > Mobile Network >Access Point Names
STEP 2: Press the ‘Menu’ button and then select create ‘New APN’
STEP 3: Populate the following fields:
Name: MOMMS
APN: mms.davewireless.com
MMSC: http://mms.mobilicity.net
MMS Proxy: 10.100.3.4
MMS Port: 8080
MCC: 302
MNC: 320
APN type: mms

May be a long post!
I heard that port you can just leave Blank instead of 8080...speed increase so they say!
1. Set APNs>> posted by android01 (I have heard if you leave port blank you get faster speeds, just heard)
2. Go to setting and Disable Roaming as to not incure extra charges...
3. This is a somewhat of a Backdoor fix i found that worked with Samsung Vibrant from T-mobile... DISCLAIMER: USE AT OWN RISK! ONLY MODIFY THE SETTINGS LISTED.
IF the setting is not as listed, Read the setting heading click the matching section heading, to find the location of this setting scan and read all of the setting heading/titles.
If is works without a hitch than great....Let me know.
Again these directions i found on Howard Forumns and worked with a T-Mobile Galaxy S Vibrant
I had copied this into a Word document for my Mum as the phone was going to her:
SO ALL Credit goes to Anonymous and xda!
Post:
__________
It works!!! It totally works!!!! I love it! Thank you so much guys!!!! Now I don't have to restart my phone EVERY morning as soon as I pull out of the underground garage in my car!!!
Thank you, Thank you, THANK YOU!!!!!!
Dial: *#*#197328640#*#*
Click [1] debug screen
Click [8] phone control
Click [7] network control
Click [2] band selection
This is where you make a change, default setting is [1] automatic, which means it chooses automatically between gsm/cdma (Edge vs 3g). So we are going to change this and set it to wcdma band which is 3g.
Click [2] wcdma band
Click [1] wcdma all []
Now it should display “select wcdma all bands[*]"
Now on the bottom of your phone, click the menu key, it’s the one next to the home key, now click back, menu again one more time, back one more time, this is just to confirm it set to number 2 wcdma band.
Now click menu key one last time, click end.. and you are done. Now to double verify that the phone is locked into 3g, dial in: *#*#4636#*#*
Then click phone information Then scroll down to “set preferred network type” It should now have listed “wcdma only.” PS, if you tried to do a shortcut, and just set wcdma this way first without doing the lock above, it would just go back to gsm/cdma auto once you exit the screen.
Your phone should now be locked into 3g.
__________
Also what i do is Only click the 1700 and 2100 frequencies.Chose by hitting the menu button>>back and i forgot the option. it is "to add another band?" and so click either one frequency first, then menu>back>"add another band"!
This keeps me on 3G directly and always!!! DONT forget to turn Roaming off as to not incure unwanted charges.
Hope this helps and let it be known if it works for you nexus guys. or am i full of it and these are samsung commands....DOH! if they are.

the nexus from bell does not have phone lock..
i can use my fido sim in the phone..my nexus is from bell as well

Yep I have it with Mobilicity and it is an absolutely great phone granted some things are slower than they would be on 1 of the big 3 but it is more than adequate
Sent from my Galaxy Nexus using xda premium

actually for the price you pay its the best plan for GTA. i mean data isn't the best but good enough for mail, browsing and checking score.

Epic 4G touch - text/talk/1Gb of web 55$ ,PAGEPLUS

Hey guys, I've had a motorolla droid X on pageplus with the 40$ plan.
It has talk/text/ and 20mb of web. But they just released a 55$ plan with talk text and 1gb of data. Pageplus is the verizon network.
I gave them my E4GT Hex code and they said the phone was eligible. ( its great that they take sprint phones )
For those of you who don't want to flash the samsung incognito esn, just to get on boost mobile this is a great substitute. Especially if, you prefer verizon towers and dont mind a cap on your data... I dont use that much (yet).
check it out >>
https://www.pagepluscellular.com/Online Store/Minutes/55 Plan Card.aspx

that's good news! I'm thinking about in buying a new samsung galaxy s2 epic 4g White model for sprint that I'm gonna flash to page plus, Do you think it will work on page plus? because the white is a new model so I'm not sure if it will work, and if it work do i have to flash it or all i need to do is give the esn or hex to pageplus and they will activate it? Please answerrrr me Thanksssssss.....

1GB is a joke, I'm at 3GB with 20 days left on billing cycle. How do people manage to have a E4GT without unlimited is crazy.

lexvdub1 said:
1GB is a joke, I'm at 3GB with 20 days left on billing cycle. How do people manage to have a E4GT without unlimited is crazy.
Click to expand...
Click to collapse
That's okay... I see you saying you used 3GB in 10 days, and think you are crazy.
I am on wifi at home, so no data use there. And at work, I'm on wifi, so no data use there. Even if I didn't have wifi, I don't see how I would use that much data at work, since there is a radio or PC for streaming music.
What do you do to use that much data?

I don't work behind a desk , so i have to use my phone as a pc.
Here's a pic of my usage.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here's my friends Iphone, he's on my plan.
I've seen post on this website where people are using 16gb+, so i thought my usage was moderate.

Voice and text WORK
Here's what im working on with 3g.
zaping18 said:
I flashed using the Same instructions used for the HTC HERO
EVO to PagePlus
By KrInEn
Software needed
• CDMA workshop 3.5.5 or 2.7 (3.5.5 prefered)
• QPST 2.7 build 323
• HTC Sync
• Diag Drivers (may be included in HTC SYNC)
Marketplace Apps needed
• APN Backup & Restore
• Droid Wall (recommended for data restrictions, must have ROOT)
THIS TUTURAL IS ASSUMING THAT YOU ARE ALREADY BASIC FLASHED!
If you are NOT basic flashed, PM me and we can work something out with remotely flashing your phone and activating it on Page plus.
Ok, so first things first, install QPST, Workshop, and all drivers. Now you will need your SPC/MSL code. So;
STEP 1: SPC/MSL Code
Plug in your phone to your PC, when prompted choose “Just Charge”. Open the Dialer and dial ##3424#, this should bring up a black screen with a modem phone etc. You are now in DIAG mode, if your PC prompts please install the diag drivers at this point. Screen should look like this:
Ok, we are in diag mode, now go into your device manager and take note what COM port your phone is on.
Now open up CDMA workshop. For those of you using 3.5.5 this should be cake.
3.5.5 Users ONLY:
Connect to your phone and read it. I will not post any pictures because if you have 3.5.5 paid I am sure you know how to do this. Click on security and then in the SPC section click the drop down box to “HTC Method” and click read. Once it reads your 6 digit MSL click send, should say ‘Phone unlocked”. Click SPC and then “write 000000”, Tada you are done.
2.7 Users:
Ok same as above connect to your phone and read it. Click on Security then under SPC where it says “Default Method” change it to “Universal RAM Method”. Then click read, you should get a box like this;
Set it just as shown above, and then click Ok. Sit back this will take a while. You will then get a list of 30 – 40 possible SPC codes. Start pumping the 6 digit codes in here one by one until you get “phone unlocked”
When you see “phone unlocked” change the 6 digits to all 0’s and click SPC then Write. Congratulations SPC section DONE!
STEP 2: Programming
With your phone still connected and in DIAG mode. Go to Start > Programs > QPST > QPST Configuration. Should look something like this (minus all of the ports)
Click on “Add New Port”
Uncheck “Show Serial and USB/QC Diagnostic ports only” you should now see the port your phone is on, double click it. Your phone should now show up on that first screen. Now click on “start clients” then “service programming”. You should be greeted by this;
Click OK and here we go.
Click “Read from Phone”
Click OK, once it is done reading using the arrows at the top right, scroll right until you see M.IP and PPP Config.
Click on M.IP first
Change Mobile IP Behavior to “Simple IP only” and click on Profile 2.
Make it look just like ^ but have your 10digit MDN in front of the “@” signs. HA Shared Secret and AAA Secret both click on Enter text string and type in “vzw” (without the quotes). Then click OK.
Click on PPP Config
Click on Um and change “user name” to “[email protected]” Change Tethered NAI to “[email protected]” Change password to “vzw”. Click on AN set user name to “[email protected]” and password to “vzw”.
You are done, click write to phone.
Step 3: MMS
This is done on the phone. This will be short and sweet, if you made it this far this will be cake.
-Download APN backup&restore from the marketplace.
- Open APN Backup
- Click BACKUP APN'S!
- Download this file http://www.megaupload.com/?d=46FKCYV0 <<<< LINK IS DEAD
- Mount phone as disk drive
- Copy file to apnbackup folder
- Unmount phone
- Turn on airplane mode
- Open APN backup
- Delete APN's
- Restore APN's (select EVO pageplus file)
- Turn off airplane mode
- Reboot
There you have it, full flashed. If 3G is spotty try flashing a NON EVDO PRL to the phone.
This tutorial is FREE, if you want to donate to future endeavors, or just want to buy me a beer.
Paypal: [email protected]
Click to expand...
Click to collapse
I'm having trouble getting it to work though.
( There is also a write up here with PRL files and a word DOC with screen shots for more information. )
- I changed Profile 1 in QPST when I first tried this out through the phones data programming menu. by typing ##DATA#
I got data settings from kitty wireless right here>>
http://www.kittywireless.com/pageplus/pageplusmanualprogramming.html
Code:
Primary Proxy Address ppcgw1.vzwreseller.com
Secondary Proxy Address ppcgw2.vzwreseller.com
Primary Port 8080
Primary LXL Port 443
Secondary Port 8080
Secondary LXL Port 443
User Password vzw
Homepage http://homepage
- Profile 2 is on the settings in the write up at the top of the page. I think I might be doing something wrong with profile 1, cause i didnt know what I was doing when I set those settings. But 2 doesnt work either. I'm going to figure this all out in the next few days though. :0)
*I'm going to post screen shots of QPST when I have more details. *
*AS OF NOW I HAVENT GOTTEN THIS TO WORK, LET ME CONFIRM EVERYTHING FIRST BEFORE YOU TRY THIS.*

3g DATA, TALK, and TEXT WORKING
a more comprhensive write-up for the epic 4g is coming soon.
Now if only I could get 4G then I'm really winning. But I may instead just switch to boost for that

toussant said:
3g DATA, TALK, and TEXT WORKING
a more comprhensive write-up for the epic 4g is coming soon.
Click to expand...
Click to collapse
I made epic 4g to work on pageplus only for voice and text. I'm looking forward for your instructions to configure 3g data.
Also the epic alwayse shows as roming for some strange reasons. Any help on that would be appreciated.
Thanks.

1XRTT Reply
toussant said:
3g DATA, TALK, and TEXT WORKING
a more comprhensive write-up for the epic 4g is coming soon.
Now if only I could get 4G then I'm really winning. But I may instead just switch to boost for that
Click to expand...
Click to collapse
Thanks, we're looking forward to getting proper EvDo working on our machines.
- 2B

I have heard about it. Is it difficult to switch your carrier? I currently use Boost Mobile and had someone flash it for me. I would prefer to do the flash myself just to save money.

CARRIER Reply
cocoapapi said:
I have heard about it. Is it difficult to switch your carrier? I currently use Boost Mobile and had someone flash it for me. I would prefer to do the flash myself just to save money.
Click to expand...
Click to collapse
People say "flash" to avoid the "change ESN" term that seems to perk up trolls like live flesh attracts walkers. If you've got a normal Samsung Epic, I'd encourage you to check out this nearly comprehensive guide (things can be a little dicey in the "data" step, and you'll have to force 1xRTT on the phone end until somebody can figure out how to get EvDo working - also, I'd use a more up to date PRL if you can find one):
https://docs.google.com/document/d/1E4nNITQnzEoEkkVp4j7k_N_yghvNh_SozuKe3az_Nx4/edit?hl=en_US
- 2 Bunny

I've heard you can get 3G if you can pull the DMU
keys from a working verizon phone. I have a Droid D X sitting around
if anyone can confirm this please reply.
Right now I'm running 1X and I hate it. I may flash to boost if I can overcome the hassle. might be worth it to me.

ADVICE Reply
toussant said:
Right now I'm running 1X and I hate it. I may flash to boost if I can overcome the hassle. might be worth it to me.
Click to expand...
Click to collapse
Trust me - It's NOT. Boost Mobile sucks big time and PagePlus is a miracle in comparison, even with their 1xRTT data. I actually ended up switching back to Sprint's legendary $30 a month unlimited data plan and have never looked back to Boost's sickly plans or PagePlus's mediocre amounts of included data (and lack of roaming on Sprint). Whatever you do, do NOT go to Boost.
- 2 Bunny

kainppc6700 said:
Trust me - It's NOT. Boost Mobile sucks big time and PagePlus is a miracle in comparison, even with their 1xRTT data. I actually ended up switching back to Sprint's legendary $30 a month unlimited data plan and have never looked back to Boost's sickly plans or PagePlus's mediocre amounts of included data (and lack of roaming on Sprint). Whatever you do, do NOT go to Boost.
- 2 Bunny
Click to expand...
Click to collapse
I'm on boost and I get fast 3g on the 40 unlimited plan. I think its worth it
Sent from my SPH-D710 using Tapatalk 2 Beta-5

timer1 said:
I'm on boost and I get fast 3g on the 40 unlimited plan. I think its worth it
Sent from my SPH-D710 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
But you had to pay an outrageous $50 a month for a while to get that. If you're gonna pay a Sprint MVNO for unlimited data without roaming, at least try Virgin Mobile since their unlimited is $35 (still no roaming though) right off the bat.
- 2B

kainppc6700 said:
But you had to pay an outrageous $50 a month for a while to get that. If you're gonna pay a Sprint MVNO for unlimited data without roaming, at least try Virgin Mobile since their unlimited is $35 (still no roaming though) right off the bat.
- 2B
Click to expand...
Click to collapse
Ur right I did have to pay 50 for six months but I still get good service.
Sent from my SPH-D710 using Tapatalk 2 Beta-5

The MVNO I use - KDDI Mobile - has a similar plan for single phone users:
500 "Anytime" minutes
Free nights & weekends
Unlimited text & web
$69.99 /mo
The added benefit is for those who call Japan - free landline calls in the "Anytime" minutes.
Phone is stock Sprint and behaves just like a Sprint phone, which is why I jumped on the E4GT. Our family plan + unlimited web for my phone is still only about $140 for 1000 minutes.... and it's unlikely that we'll exceed that again anytime soon.

garwynn said:
The MVNO I use - KDDI Mobile - has a similar plan for single phone users:
500 "Anytime" minutes
Free nights & weekends
Unlimited text & web
$69.99 /mo
The added benefit is for those who call Japan - free landline calls in the "Anytime" minutes.
Phone is stock Sprint and behaves just like a Sprint phone, which is why I jumped on the E4GT. Our family plan + unlimited web for my phone is still only about $140 for 1000 minutes.... and it's unlikely that we'll exceed that again anytime soon.
Click to expand...
Click to collapse
That's even worse. I actually do the Sprint SERO thing and get everything you're talking about for $30 - plus free roaming. Outside of Sprint SERO, only Virgin Mobile or TMobile has a good affordable data plan (unfortunately, they operate only on inferior GSM devices and have worse coverage than Sprint).
- 2 Bunny

Those of you using Page Plus on your Epic 4G Touch, are you having problems with dropped calls?

toussant said:
Voice and text WORK
Here's what im working on with 3g.
I'm having trouble getting it to work though.
( There is also a write up here with PRL files and a word DOC with screen shots for more information. )
- I changed Profile 1 in QPST when I first tried this out through the phones data programming menu. by typing ##DATA#
I got data settings from kitty wireless right here>>
http://www.kittywireless.com/pageplus/pageplusmanualprogramming.html
Code:
Primary Proxy Address ppcgw1.vzwreseller.com
Secondary Proxy Address ppcgw2.vzwreseller.com
Primary Port 8080
Primary LXL Port 443
Secondary Port 8080
Secondary LXL Port 443
User Password vzw
Homepage http://homepage
- Profile 2 is on the settings in the write up at the top of the page. I think I might be doing something wrong with profile 1, cause i didnt know what I was doing when I set those settings. But 2 doesnt work either. I'm going to figure this all out in the next few days though. :0)
*I'm going to post screen shots of QPST when I have more details. *
*AS OF NOW I HAVENT GOTTEN THIS TO WORK, LET ME CONFIRM EVERYTHING FIRST BEFORE YOU TRY THIS.*
Click to expand...
Click to collapse
anyway someone could help me with this when I get an sg2? please?

I need your S4 data T-Mobile settings

I have a Sprint L720 Galaxy S4 that I am currently using with Metro PCS/T-Mobile. I have the correct APN settings, I can make and receive calls just fine. I can send texts and MMS just fine and receive texts as well. I can not receive MMS messages or texts with picture attachments.
I looked in the ##DATA# menu or ##3282# menu as I have my MSL number. If anybody here has used the L720 or nearly any fairly new Android with T-Mobile/MetroPCS can you please give me your working settings from the data menu?
I looked through the entire data menu and it is filled with Sprint.com this and sprint/mms/server that etc. I tried changing the most obvious things to T-Mobile's settings, but I know I am missing the crucial settings to allow me to send and receive texts with photo attachments. I tried the METROPCS fix here in the forums for the L720, but the files give errors when installing. I am certain that manually entering the settings from someone else's phone will work. There are a lot of settings in the ##DATA# menu, but it would take maybe five minutes to copy them down.
I would really appreciate it if anyone could give me their working info. T-Mobile said they simply do not have time to look those up as the data menu is too specific. The phones in the stores are not rooted not do they have the dialer app installed to get me to the data menu.
Thank you very much.
Sprint L720 (not T)
Android 4.4.2
MetroPCS/T-Mobile provider

All you need are a few settings. Name the connection T-Mobile
Under APN input fast.tmobile.com
MMC 310
MNC 260
Everything else should be automatically filled in. Just input those settings and you're now able to connect to T-Mobiles LTE data.

AndroidInitiate said:
All you need are a few settings. Name the connection T-Mobile
Under APN input fast.tmobile.com
MMC 310
MNC 260
Everything else should be automatically filled in. Just input those settings and you're now able to connect to T-Mobiles LTE data.
Click to expand...
Click to collapse
I sincerely appreciate your response but I have since learned that the Sprint motherboard simply can not use all of the T-Mobile frequencies for LTE data. I was getting H+ which was not bad but I was hoping for more than the board was capable of.

jmacguire said:
I sincerely appreciate your response but I have since learned that the Sprint motherboard simply can not use all of the T-Mobile frequencies for LTE data. I was getting H+ which was not bad but I was hoping for more than the board was capable of.
Click to expand...
Click to collapse
My apologies was not reading carefully. Sprint's Mobile APN settings are different:
Follow these steps on this link and it will have everything you need for sprint's mobile data settings
http://buzzmobile.us/sprint-apn-settings-android-us/