Related
Hello all,
I received my USB adapter from Samsung today and am pleased to inform you that it works wonderfully with a USB hub. My hub has 4 slots on it and the tab was playing well with multiple USB devices being plugged in.
Really? I guess usb hub is needed to make things work? i had all kinds of issues. Mainly, not reading some usb drives, and memory reader. I just plugged the usb drive, directly into the usb adapter. The memory card reader was connected by standard usb to mini usb cable. That didn't work.
I got to try this.
Thanks.
No problem. I actually have not tried storage devices yet, only input devices. I posted on your other thread as well.
I have a feeling thumb drives may be having a problem if they are formatted in the FAT32 file system. I am going to try an NTFS drive and external hard drive and will let you know my results.
UPDATE: It appears I had it the other way around. I plugged in an NTFS drive to no avail, then formatted it to FAT32 and it worked.
FAT32 works great. NTFS is completely missing from stock kernels, it's in pershoot's "lib" extra modules archive on his kernels. However, I tried an NTFS drive using the extra module and it failed. (might require some manual mount magic???) It would take a lot more work to get FUSE working properly, and that's needed for the (vastly superior) ntfs-3g driver.
So does it work with external usb hard drives (both self powered and plug powered) of the sizes of 500GB and more?
what brand/type
what brand/type of usb hub do you have
Invisman said:
So does it work with external usb hard drives (both self powered and plug powered) of the sizes of 500GB and more?
Click to expand...
Click to collapse
If the hub is powered then the drive should work fine. You just can't use a usb powered drive without a power source
Sent from my SCH-I500 using XDA App
Ican't get mine to read my game controllers. Says something about high powered device. It won't let me read the message. When I tap it to make it bigger it just goes away. I am very frustrated. Can you get a fame controller to work? I used ps3.
Sent from my PC36100 using XDA Premium App
Shadee1394 said:
Ican't get mine to read my game controllers. Says something about high powered device. It won't let me read the message. When I tap it to make it bigger it just goes away. I am very frustrated. Can you get a fame controller to work? I used ps3.
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
PS3 controllers require a special driver. It may also require too much current since it tries to charge via USB. You'll need a powered hub if that is the case.
Gonna try my PS3 controller in a few minutes.
Edit: So far:
No excessive current errors from my PS3 controller - however mine has a fully charged battery because it's been plugged into a PS3 that has only been playing movies/videos for weeks. However button presses aren't recognized by anything. My guess is that if I dmesg I'll get an unrecognized device error. PS3 controllers are nonstandard.
However a Nyko AirFlo controller worked fine in SNES9x EX. It was semi-recognized by SNESoid - the keymap screen recognized something was being pressed, but games themselves wouldn't register presses.
Edit 2: PS3 controllers require the hid-sony kernel module to be loaded. This is included in pershoot's optional "lib" archive with his kernels. I had to hit the PS button to get it to turn on and start sending presses to the tab. No excessive current errors, but my controller was fully charged.
Thanks. But for some reason the ps3 and the x box controller worked for the xoom. I called samsung and they don't have any help for this issue yet. Can you get any external device to work for at least over fifty percent of what the adapter is meant to do? Did you get any error messages. I get high powered device connected. Then it say underneath that out could not connect. Device needs............. I cant read the rest. When I tap it to enlarge and read it disappears. Samsung can't figure out why that is happening either. Plz help.
Sent from my PC36100 using XDA Premium App
Shadee1394 said:
Thanks. But for some reason the ps3 and the x box controller worked for the xoom. I called samsung and they don't have any help for this issue yet. Can you get any external device to work for at least over fifty percent of what the adapter is meant to do? Did you get any error messages. I get high powered device connected. Then it say underneath that out could not connect. Device needs............. I cant read the rest. When I tap it to enlarge and read it disappears. Samsung can't figure out why that is happening either. Plz help.
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
Make sure the PS3 controller is fully charged before you connect it. If it isn't, it'll try to charge the battery and that's probably what sets off the overcurrent protection.
As to it working with the Xoom - I'd be VERY surprised if it worked with the Xoom when stock. Not so surprised about custom kernels, adding those modules is one of the first things people add, and the Xoom guys may have figured out module autoloading.
Thanks going to try now
Sent from my PC36100 using XDA Premium App
nothing over 32GB for now
Kevin Gossett said:
If the hub is powered then the drive should work fine. You just can't use a usb powered drive without a power source
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
wish i'd have read this before i bought it. i assumed it would since every other android tablet i have/had can power my external hds. pretty much makes it useless for me now as i was hoping to use it as external storage and for easy, quick file transfers. tf, xoom, and archos all work fine.
Entropy512 said:
As to it working with the Xoom - I'd be VERY surprised if it worked with the Xoom when stock. Not so surprised about custom kernels, adding those modules is one of the first things people add, and the Xoom guys may have figured out module autoloading.
Click to expand...
Click to collapse
It works on a stock 3.1 build, it was one of those new features hyped at google i/o. I have both the European XOom and the Galaxy tab. The xoom copes fine with the ps3 and my other usb only non brand gamepad. The galaxy tab give me the hipower usb device error.
Entropy512 said:
...
However a Nyko AirFlo controller worked fine in SNES9x EX. It was semi-recognized by SNESoid - the keymap screen recognized something was being pressed, but games themselves wouldn't register presses.
...
Click to expand...
Click to collapse
For SNESoid, you probably forgot to go into the other settings menu and turn on external input. The names may be off, but in addition to setting the key mappings, you have to turn on another option for it to see additional input devices, and then your gamepad will work
poorlilpoop said:
Really? I guess usb hub is needed to make things work? i had all kinds of issues. Mainly, not reading some usb drives, and memory reader. I just plugged the usb drive, directly into the usb adapter. The memory card reader was connected by standard usb to mini usb cable. That didn't work.
I got to try this.
Thanks.
Click to expand...
Click to collapse
I had troubles reading an SD card with an old USB reader I had lying around. It was hit and miss.
Then I bought this SD card reader at Fry's for $4.99 and it works perfectly.
So, just to be clear, you are using a male A-A USB cable with one end plugged into the USB adapter on the GTab and the other end into one of the available USB ports in the hub, right?
I've got an GT-P7500, and it will not read any USB Sticks.
Using the Samsung connection kit.
tried with 15 different USB sticks, all FAT32 formatted, all sizes 1-16gb.
A friend uses a 4gb stick in a GT-P7510, i tested that one, didn't work
Other things like usb mouse works, but not usb stick.
Anyone got any suggestions ?
Wonder if there is something wrong with it.
How do you know it isn't working? What directory are you looking at? What does the notification bar show? Which connector are you using? Is USB debugging on?
Also this is more a Q/A...
I'm hoping this thread is still alive because I am having the same problem. @ajnindlo I'm using the standard Samsung USB Connector with a 8gb usb stick. I've tried with USB Debugging on & off and I get the same message. "Damaged USB" and asked me to reformat.
I am using a Mac BUT I did format the stick as a ms-dos fat format.
Please help...
Thank you
PS. I know this is more of a q&a place, didn't know where else to post and didn't find any other with this problem but here. Please redirect to correct location if you know of a solution. Thank you
Just i hace received my USB kit and it works perfectly, my USB has 16 g and i haven't do anything to work, conected and work.
Sent from my GT-P7510 using xda premium
I had a 32 GB sd card and it also wouldn't be detected by my Galaxy Tab. But, I plugged it into my phone, plugged my phone into the computer, formatted the sd card and when I put in my Gtab, it worked.
I got my connection kit today but its not working at all.
Got 2 adaptors 1 for sd card and 1 for usb connection they both dont work.
Got no status bar message or anything.
Do I miss something here?
Sent from my GT-P7500 using xda premium
one catch that I have realized is that for proper identification of the USB Stick, the tablet must be in english language.
My friend had a hard time figuring out why his tablet won't show up any notification when a USB Stick was connected, whereas mine shows the "My Files" app showing the storage folder and all the contents of the stick, joking around I told him that was because my tablet was in english and his tablet was not.
Anyway, Astro file explorer doesn't work with USB Sticks, Use ES File Explorer instead and look in /mnt/ folder for usbdrive , there should be your content.
Nope still not working. No files found.
Feels like my device doesnt support usb host.
Is that possible?
Sent from my GT-P7500 using xda premium
brieuwers said:
Nope still not working. No files found.
Feels like my device doesnt support usb host.
Is that possible?
Sent from my GT-P7500 using xda premium
Click to expand...
Click to collapse
Connect the usb stick, open ES File explorer and go to /mnt/usbdrive folder, if you can't find the folder (which is not on the sdcard) you need to configure ES File explorer to get out of the sdcard directory, the usbdrive folder is always present even if you don't have any usb drive connected
I had similiar problems with my 16GB P7510. It would only recognize any of my Sandisk sticks and a brand new PNY only at 30% of the time. The only stick it was reliable with was an ancient 256MB stick I had. I worked fine with my camera.
I ended up returning it for a 32GB P7510 and have not had any problems with any of the sticks. At the time I didn't think the tablet was defective but it appears it was.
Sent from my GT-P7510 using Tapatalk
Solution ???
drummerweed said:
I'm hoping this thread is still alive because I am having the same problem. @ajnindlo I'm using the standard Samsung USB Connector with a 8gb usb stick. I've tried with USB Debugging on & off and I get the same message. "Damaged USB" and asked me to reformat.
I am using a Mac BUT I did format the stick as a ms-dos fat format.
Please help...
Thank you
PS. I know this is more of a q&a place, didn't know where else to post and didn't find any other with this problem but here. Please redirect to correct location if you know of a solution. Thank you
Click to expand...
Click to collapse
I have exact the same issue, but it's strange, some SD has this issue, some don't.
"Damaged USB"
I found a trick, but it solved my problem only once: format SD card by a digital camera (Canon powershot) , SD was now recognized by Tab10.1
Putting some extra files on it by PC ... insert SD to Tab10.1 ... same issue again :crying:
Have tried several SD formats & sizes ... notting helps
Did someone knows a solution to solve this problem
GT-P7510
Android 3.2
Rooted, TASK 14 Rom
Try to reboot, it worked for me.
bar_rodoy said:
Try to reboot, it worked for me.
Click to expand...
Click to collapse
Correct ... but after a second or third time connecting same SD , issue returns
Have tried this, waiting for a while does helps time to time ... so I guess it's maybe "memory" or "kernel" (system) related.
It seems we have the same TASK14 ROM + Pershoot's kernel.
Strange things.
I made the test by unroot my device and went back to factory stock ... it look like the issue is solved for 90% ... it appears when you disconnect and reconnect to fast after the 1st disconnection .
usb not recognised
Nothing happens when i plug (several) usb sticks. /mnt/usbdrive is empty.
Any idea?
charging Problem
You must Check that Your usb Debugging is On or Not as it creates problems and this will be stopping You device from Accepting Usb Sticks..
I found that FAT 'sdCard's would mount , but that NONE of my NTFS sticks would mount
All my sticks are NTFS , so that was unacceptable.
rooted 7500 and 6800
Installed 'Paragon NTFS&FHS', from the AndroidMarket and all files now popup in 'MyFiles' when I insert the usb with the adaptor
I have the Samsung Connection Kit containing as USB and a SD adapter. The USB adapter works fine, but the SD adapter doesn't work at all. All it does is starting the TuneIn Radio app when it is connected. I uninstalled the app and now connecting the adapter has no effect at all. Any suggestions?
Hey guys
So basically I have a Sony Handycam DCR-HC19E camcorder, and was wondering if i plugged it into my galaxy tab using the samsung usb adapter thing, will it recognise it and allow me to take and transfer files to and from the tab?
As i want to upload some videos to youtube but it wont work on my computer?
So im basically asking if anybody has got mass storage access to devices they have plugged into the tab 10.1
Thanks in advance for any help
Adam
I have a Sony dcr-sr100. It mounts to my galaxy tab 10.1 on stock firmware.
I have found that " high" powered USB devices are rejected by this tab, which is annoying. But i have found that how you connect the devices matter also.
E.g. if the adaptor is plugged in then i use my USB drive to the adapter is does not work.
If my USB drive is plugged into the adapter then into the tab it usually works, if not pull out and try again right away.
If you can get a powered USB hub, this will help for connecting more devices. Generic keyboard & mice work fine ( if not " high" powered)
USB mass storage otg app in the market will help to mount more drives at once and enable access to NTFS formatted drives which are not supported on the stock firmware.
Sent from my GT-P7510 using XDA
brb8two said:
I have a Sony dcr-sr100. It mounts to my galaxy tab 10.1 on stock firmware.
I have found that " high" powered USB devices are rejected by this tab, which is annoying. But i have found that how you connect the devices matter also.
E.g. if the adaptor is plugged in then i use my urban drive to the adapter is does not work.
If my USB drive is plugged into the adapter then into the tab it usually works, if not pull out and try again right away.
If you can get a powered USB hub, this will help for connecting more devices. Genetic keyboard & mice work fine ( if not " high" powered)
USB mass storage app in the market will help to mount more drives at once and enable access to NTFS formatted drives which are not supported on the stock firmware.
Sent from my GT-P7510 using XDA
Click to expand...
Click to collapse
Thanks for all this info!
So would u recommend getting a Samsung USB adapter thingy and them trying from their?
Sent from my GT-I9100 using xda premium
This is the one I got.
http://dx.com/p/106541?r=78454077
I don't see much point paying more than this.
Also the " card reader" versions are designed to only mount one card at a time since that is how the stock device handles otg. But if you already have USB card reader your happy with, it can be used with USB mass storage OTG app from the market. ( Which also adds NTFS support).
Sent from my GT-P7510 using XDA
Sprite cheers. I may just get a 3 pound one off Amazon, then see if it works
Sent from my GT-I9100 using xda premium
I got the corded version, as I thought it was more risky using the "Block" style one that might break the connector 30pin if it was knocked too hard.
There is rick of the corded version breaking on the cable, but it is a cheap replacement fix.
Sent from my GT-P7510 using XDA
i need to connect the high powered external 1 TB hard drive
yogeshmha said:
i need to connect the high powered external 1 TB hard drive
Click to expand...
Click to collapse
Ok, what information do you need?
You have made a statement but not asked a question. Answers to your statement have been covered above also.
Sent from my GT-P7510 using XDA
Hey Guys,
last time i bought an usb otg cable. I want to use it with my Gnex but i mounted it and in the file manager nothing appears. I tried several tools(stickmount, paragon ntfs). All time the directory is empty. Must i format it with exfat or another file system. My hard drive is 500gb large, ntfs formated and needs a second usb cable for power input(but i dont think thats the problem)
Thanks
I never had any luck trying to connect my external 500GB HDD to the Gnex. I asked the same question but never got any confirmation of anyone successfully making this connection, hopefully you have better luck than me. Subscribed.
I doubt the GNex puts much power out of its usb. Probably not enough for a HDD.
The power is not the problem, the device is already "mounted" but in the directory there is showing nothing... I googled for an hour or so but found no solution, hopefully my new ordered usb stick can do this
Sent from my Galaxy Nexus using xda app-developers app
One of the reason it's not showing up could be the formatting in your drive,
most drives are NTFS which isn't recognized by GNex (don't know about other android devices).
Try formatting in FAT and let us know what happens, it should hopefully work than.
I am unable to connect my Xperia S with external storage as I brought 3 different otg cables and all of them are not working, Please can anyone tell me where can I find OTG cable that surely works with Xperia S. I m from India
aprilian8 said:
I am unable to connect my Xperia S with external storage as I brought 3 different otg cables and all of them are not working, Please can anyone tell me where can I find OTG cable that surely works with Xperia S. I m from India
Click to expand...
Click to collapse
what external storage where you trying to connect? pendrive, harddisk or memorycard?
HP pen drive FAT32 formatted
aprilian8 said:
HP pen drive FAT32 formatted
Click to expand...
Click to collapse
what capacity btw?
When you connect a pendrive, usually either of 2 things happen:
1.) shows that external storage is connected, details can be seen in settings>storage, external storage. file access needs to be done using a file manager app.
2.) shows, device power consumption error. meaning, ur pendrive consumes lot of power than the phone can provide. solution to this is to use a new pendrive or thru a externally powered usb hub.
Its of 8GB. The phone doesnt show any sign of connected pen drive and even the external storage option in "storage" is greyed out
thanks
Sent from my GT-I9505 using xda app-developers app
aprilian8 said:
Its of 8GB. The phone doesnt show any sign of connected pen drive and even the external storage option in "storage" is greyed out
Click to expand...
Click to collapse
hmm, I dont c wat is wrong, try another pendrive, prefarably of a different model or brand and of smaller capacity.
else it shud be a problem with the cable.
I had bought a general OTG cable from Ebay
aprilian8 said:
I am unable to connect my Xperia S with external storage as I brought 3 different otg cables and all of them are not working, Please can anyone tell me where can I find OTG cable that surely works with Xperia S. I m from India
Click to expand...
Click to collapse
You can use "StickMount" app to mount USB storage , incase your phone is not detecting the USB device. The only issues is that the app needs a rooted device. so if your mobile is rooted then you are good to go.
StickMount isnt helping either
try connecting a usb mouse and/or keyboard..
if it works, try a different pendrive, else then maybe u can blame the OTG cable or ur phone...
I made my own OTG cable using an old regular micro cable that I no longer needed. I believe you need to "jump" pin four to pin five....but you would be best researching it. I recall it being extremely easy to do, but then again I do have years of experience ripping stuff apart and putting it back together.
---------- Post added at 07:56 PM ---------- Previous post was at 07:54 PM ----------
Also, I don't think drive size is an issue as I've connected a 2TB full size external hard-drive (the kind with a power brick) and was able to use it just fine. It was NTFS formatted so I did have to use USB OTG Helper to get it working, but it did work with no problems.