Hi I Have Orange SPV M650 He Was Not Starting I Make Hard Rest But screen was not appernce but i press recod key and power on hi has on with multi coulors but dont connect to pc sound was appers but dont connect wich pc or Active Sync PLzz Help me I Verry Thankful to u... i m still waiting for replys and sorry for my english..
i see this
IPL 3.13.0001
SPL 3.13.000
your phone load into bootloader. as for me. you download rom .official rom. and load it.
something may help
...
go here for instructions on what to do, look for BRICKED DEVICE.
the original rom you need is the HTC WM6 Spain rom.
once you have flashed your original rom do the USPL 1.11.cmon!
only after USPL is it safe to flash any other cooked rom.
Related
HELLO , Someone plz help me i have Cingular 8125 G3 with WM5 and i was trying to upgrede it to WM6 !
IPL 1.08
SPL1.08
GSM 01.16.11
OS 1.8.11.1
what i did !
1.Unlocked using Lokwiz somthing
2. before i run WM6 Utility i used t-mobile radio 2.26 somthing radio update utility
and i dont know what happen during update process i was away from computer! when i got back phone was turned on !
and phone still turns on and have WM5! but phone dosent sync or charge or do anything when i connect it to USB !
phone is really slow now ! battery status is Unknown!
I try to turn off and on and
IPL 1.08
SPL1.08
OS 1.8.11.1
there is no GSM in there anymore !
someone plz help me !! thanks
And i can run Update again cuz USB and sync is not working!
i would look in the xda-wiki
if i could upgrade the device while it was
in bootloader
I'm new on this forum and I really need some help .. I tried to change an t-mobile mda compact III rom (wich it was in german) but ended with an bricked phone (( .. If someone can help me ...please .. The device is not even mine; I was trying to help a friend and now I don't know what to do; I really don't have money to send it to imei-check or anything else. The artemis was in german . the problem ,now : was from t-mobile germany or t-mobile austria ? I really don't know beacause the device is second-hand and i don't have who to ask ..
after deep search I lost all my hope in finding an original WM5 ( I think) rom .. not german and not austrian.
So is there an solutin ? because I'm in big panic ...
Thanks a lot in advance guys !
hello,
took this for the windows mobile 6 thread
Bricked devices
If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
HTC P3300 WWE factory rom downloadable here http://rapidshare.com/files/19322112...0_WWE_SHIP.rar
Dopod P800 WWE factory rom downloadable here http://rapidshare.com/files/21058219...0_WWE_SHIP.rar
O2 Orbit WM5 WWE factory rom downloadable here http://rapidshare.com/files/41574866/Arteimg.nbh
O2 Orbit WM6 WWE factory rom downloadable here http://rs314.rapidshare.com/files/10...06.90_Ship.exe
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.
i bricked my phone once over and i was able to fix it by this method, i plugged the phone into the computer and entered bootloader mode and i pressed ctrl/alt/delete and found wcescom or something like that and pressed end task.. i then ran the update and it flashed the phone back to normal. after that i ran the Hard SPL program and unlocked the cid and then flashed with a custom rom..
hope this helps.
.kev.
forgot to mention...
dont know anything about german and austrian rom's so you'll have to do a bit of research if those dont work for you...
sorry!
the links don't work (
thanks a lot .. I will try if I can get the roms ....
Hello all . Here's my problem. After all the tutorials ive been through nothing helped me. I have an HTC Diamond which i bought from Australia ( means its HTC DIAMOND TELSTRA ROM or something) and I have no idea how to put another Rom . Ive tries HardSPL and everything else , and every time I finish hardSpl and start putting a new rom it stacks at 0% . Yes ive tried a lot of programs even tried to rebuild the rom file and still nothing. What I need to do is remove the stock telstra rom and put another one , custom rom
Any help would be much appreciated!
Anyone can help me out????
Think you used a signed hard spl
You must use a Unsigned hard spl
Can you be more specific pls?
Read this Topic http://forum.xda-developers.com/showthread.php?t=400950
And install the Unsigned Hard SPL Diamond Olinex
Download link is in the second topic
And retry to flash a rom
I know you guys most be tired of this but im still a lil confused about all this since i have searched around and i have still to know how to return the stock SPL...now i know theres alot of post that show how but what i need to do is find out one which i dont have to use my phone:
What i mean is....i dont have to copy SSManual.bat to my fun and run it from my phone...because i have to return my phone to HTC for warranty reasons but i cannot get passed the align screen configuration at boot since my touch is messed up (p.s. i can still flash and active sync)...
what i need to know is a way to return to the stock SPL without using the phone (except for Active Sync)...
p.s. if i have the ASIA WWE HK ROM on the SPL would be 1.34 or 1.93?
thank you!!
[SOLVED]
Basically, thanks to the ppl in this thread for helping.....since i couldnt get passed my align screen cause of hardware problems with my screen i couldnt access the sspl-manual in order to revert to stock spl so what i did is i flash my phone with Dia duit 1.4 which has no welcome screen or align screen so i could go thru to the phone then performed the sspl manual and reverted to the 1.93 spl (my version)and afterwards i flash my phone with the Asia HTC wwe orginal romhttp://forum.xda-developers.com/showthread.php?t=410720 ......i know ure supposed to first flash orginal rom and then the stock spl but i took a chance and it worked...THANKS u guys keep up the good work and now its up to HTC to fix my hardware....Hoping its on warranty
By the way right now im on Olinex 1.40
thank you again!!!
can't you install the hardspl through bootloader mode?
Unfortunately no, everytime i do either i get an error [202] or it goes straight to 100% but then when i check with the vol - and reset button it shows olinex 1.40
did anybody ever try to send it without reverting back to the stock spl ?
emy09 said:
did anybody ever try to send it without reverting back to the stock spl ?
Click to expand...
Click to collapse
Try to install a rom which don't have to align the screen. then you copy the file you wants from the phone.
Good luck
does anybody know of a rom like that that exists cause that sounds like a pretty good idea!!
hi
i had your problem and has olinex 1.40 anld like to restore hard spl
first you should install original rom on your device
then install original hard spl ( i try it )
download rom 1.93 WWE from the htc site (it should be 1.93)
then hard spl with it (copy sspl manual om your device run it then restart you device run it again then connect it to pc and run ruu
hard spl : http://rapidshare.com/files/215819452/1.93_Original.rar.html
sorry my English is not good
http://forum.xda-developers.com/showthread.php?t=493719
emy09 said:
does anybody know of a rom like that that exists cause that sounds like a pretty good idea!!
Click to expand...
Click to collapse
i think the new rom of suiller (diadiut 1.4) would do. you don't need to screen align after flashing.
azera_2000 said:
hi
i had your problem and has olinex 1.40 anld like to restore hard spl
first you should install original rom on your device
then install original hard spl ( i try it )
download rom 1.93 WWE from the htc site (it should be 1.93)
then hard spl with it (copy sspl manual om your device run it then restart you device run it again then connect it to pc and run ruu
hard spl : http://rapidshare.com/files/215819452/1.93_Original.rar.html
sorry my English is not good
Click to expand...
Click to collapse
I appreciate the help but the problem is that i cannot get passed the align screen of the first boot which means i cant run sspl manual since i cannot in the files from my phone.....also if i do flash the Dia duit 1.4 rom which does not boot with the align screen or welcome screen, dont i have to flash the original rom before putting the stock SPL !!.....thank you guys for the info
hello , i have an spv m3100, i try to upgrade it from 5.0 to WM 6.1 but something has gone wrong and now i cant restart my phone.
i have done this before as well many time but this time was an unfortunate one.
not very familiar with the technical terms but when i tried to hard reset again my phone , nothing happens really and i see this tri color screen red, green and blue
and it says
Herm100
IPL-1.01
Herm100
SPL 1.11
I need some urgent help please!
Would be much thankful.
try flashing an official rom first the flash hard spl v7 it can even support flashing the rom from sd card
hope this helps
and how do i realli get an offical rom ? my hermes is orignally on orange network and thats where i have bought it from
read my rom threads bud almost last pages some ppl are for sure that you can flash the original ATT stock stripped ROM with that method