Hi guys. I have installed loads of ROMs onto my trusty hermes yet today, when trying to flash DuttyThroys Ultra Ultra Lite rom this happened: i downloaded ROM and installed it, it seemed to install fine, got to 100% and then came up with error message stating that Image File was corrupt. Now my hermes is stuck on the multicoloured bootloader screen?!?!?!? I have SPL 2.10. Hard SPL V7 HERM 100 IPL 1.04 (Dont know which of these is relevant to anythin?) .I have read the WIKI on repairing bricks but for my problem it says to reflash any nbh without radio. How is this possible if i cant get my pc to connect to my hermes???
Tried the method of turning off usb connection in active sync, removing battery, reconnecting to usb and running mitty (command SET 14 0) but nothing happens. Mitty says CMD error and active sync doesnt reopen the connection like the guide says! Man i hate this cuz i have now become one of those annoying noobs who has bricked their phone and hassles everyone for help!!!!
Have also tried to flash from sd card but nothing happens, flicks to white screen with LOADING... on it for 2 secons then flicks back to that wonderful multicoloured screen of joy!
Any help will be appreciated guys, cant live without my hermes!!!
Welcome to the fuc... nightmare world of the brick,i'mma in your same situation,now my Tytn is a piece of white stone,and it seems there's no reason to bring it back to live!
I can't stay without my Tytn i do a lot of things with it,Skype,SIP calls,Mail,Messenger,Memo,Internet......i'm in totally despair!!!
you should be able to just reflash a known good rom.
hfam95 said:
you should be able to just reflash a known good rom.
Click to expand...
Click to collapse
Brilliant story! both compelling and rich. But i have already explained that my pc doesnt recognise my hermes so how do you RECOMMEND i flash??
IT could be interesting to make the minimal effort to go and read the wiki.
anyway:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Better than just cry.
MarcWhittle said:
Brilliant story! both compelling and rich. But i have already explained that my pc doesnt recognise my hermes so how do you RECOMMEND i flash??
Click to expand...
Click to collapse
With the microsd card...
right, its looking good. managed to begin flashing (bar has stopped for ages but having read this is normal im not so scared!) using the SD method. Where my device wasnt superCID i had to use the matching ROM (Orange) to my CID (which incidently i dont know, just downloaded both Orange ROMs).
While im waiting ill try and help you TETSUO! (Im a noob so probably cant!)
Is your device SuperCID??? tell me as much as you can about your device SPL etc
dude, if u read my post u would have seen that i have tried SD method once (sing Black 3.5 not ORANGE ROM), im not crying and im grateful for any help but when i get advice such as 'flash a rom' im gonna be pissed!
And i have read ALL the page on unbricking!!!
It worked!!
One more question, as i have installed a stock Orange ROM do i now need to reinstall HardSPL v7??
Are you on a Win XP or a Vista PC?
XP dude, sorry should have said! and thanks
i went into bootloader, still says 2.10 olipro but when i try to update to new ROM (Black X RC)and pick autodetect it says it says unknown version, use SSPL. it never used to say this so i assume i need to install HardSPL 7 again???
with the tri colour sceen, when you plug the usb cable in does it go from serial to USB ?
what OS have you got ?
just my 2 cents hope it helps.
dude, i have got past that problem and have managed to install an Orange ROM onto it. i only need to know ow whether to install HardSPL v7 again!
sorry slooooooooooooooooow typing
good question hope there an answer,
MarcWhittle said:
dude, i have got past that problem and have managed to install an Orange ROM onto it. i only need to know ow whether to install HardSPL v7 again!
Click to expand...
Click to collapse
just saw your post if ur device is hardspl you just need to supercid your device, If your spl is still showing hardspl and its coming as a error that normally happens to me as well just manually click spl 2.10 and tick (is it hardspl?}
To recap, i have now managed to flash a stock Orange ROM from SD card ( i think the reason it didnt work first time with SD is because device isnt SuperCID and i was trying to flash Black RC, soon as i used Orange ROM (my device is M3100) it worked. I am now back to a fully operational device. I wish to go back to Black but when i AutoDetect what bootloader i have it recommeds SSPL method. Before all my problems it would always automatically pick 2.10?? Does this mean i need to install HardSPL v7 again??
it was HardSPL v7 before all these problems, but im a noob so dont know if it still is?? would installing Orange ROM from SD Card remove HardSPL?? Bootloader still shows SPL as 2.10 oli
MarcWhittle said:
it was HardSPL v7 before all these problems, but im a noob so dont know if it still is?? would installing Orange ROM from SD Card remove HardSPL?? Bootloader still shows SPL as 2.10 oli
Click to expand...
Click to collapse
If you only flash the orange os.nb only then your hardspl wouldnt have changed so its safe to flash your device just manually choose.
If you want to flash hardspl again then do it on a precaution method
Mark,
First of all well done for getting yourself out of a hole. It seems quite difficult to ask for help these days without being shot to pieces even when you have first tried to help yourself by doing all the right things, which is more than can be said for some who come on here asking for help. So well done again.
Re your question, I would reflash Hard SPL anyway to be sure; however before you do that go to the Mr Vanx's guide on hard SPL (forgot the link but type in www.mrvanx.org and you should be taken there) and follow his instructions.
Good luck.
WB
Hi guys i got problem and probably u know the answers.
i bought 2 HTC 8125 for 50 $ and one is working and other one just freez on Loading
IPL 1.01
SPL 2.25
GSM 01.12.10
OS 1.5.4.2
Got no idea what hapend to this phone.. Any Clues will be good, I try to do a hard reset of the phone and it say Press the send button to restore to factory setting , when i do that it say FAT formatin , Formatin Completed
and then went where it was previously ... I got no idea what that could bee. cause i cannot access over the USB
Please HELP i want to have this phone for tmobile..
for one thing your ipl & spl are different versions. if u want to know what to do look at the wiki for the wizard (make sure you do the cid and sim unlock). look up how to flash a rom, i recommend flashing the stock cingular 8125 rom (after you get the phone able to boot, and after you install the button rom) then flash ipl & spl to 3.08, then flash radio 2.71, then whatever 3rd party rom u want.
Hi guys can you help me about my phone its was suddenly hang on bootloader menu i never do any tweak with it just it goes like that, i tried to upgrade using a original RUU version from thier site but when it reach to 11% it hangs you i tried many times still have a same error so any possible can to just to fix my dopod 838pro? please i need your help guys.. thanks alot in advance.
this was on the screen with a color of RED/GREEN/BLUE/White
Herm100
IPL-1.04
Herm100
SPL-2.03
god bless you all
congratulations on not reading the instructions and installing hardspl first, you have just bricked your phone.
you can try this instructions and see if you can unbrick your device
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
alhtough i believe that an upgrade that's stuck at 11% means a corrupted radio, and you cna try installing a radio only rom, and see if that fixes that.
wht i did is re update the OS wwith same version original RUU from asia.htc site it was design for my device. from win5 i upgrade it to win6 it was a success upgrade but after 3mos i incountered problem as a phone i cant use any simcard no signal at all so thats the reason way i try to re upgrade but it stack on 11%. i hope i can use your give thanks dude.
Hi,
I sent my diamond back for repairs, and when it came back it came with SPL-2.03
As a result, I can not flash RUU_Signed_1_93OliNex_HSPL_UnsignedEdition which i need to install a cooked rom from here
Anyone have any ideas what I can do?
Thanks!!
you can't flash SPL 1.93???
My Diamond had SPL 2.03 and I managed to flash 1.93, maybe you're just doing something wrong.
I noticed there's a quite a few different new official SPL versions out there..
Can someone tell me if there's a difference in performance/battery life between hard-spl 1.40 & 1.93? I'd really appreciate it.
just run the sspl-manual from your device and try flashing HSPL after your screen becomes blank.
I have to flash my girlfriends diamond that she got second hand and happens to be a French device.
it is locked with pass and the shop owner doesn’t remember the pass. Willing to take back the device my girlfriend wants to keep it if possible.
Since it has a PW that I don’t know I only can put it in 3 color screen manually and then go on.
Doing so I get this 3 color info page:
DIAM100 64M
SPL-1.93.0000
MicroP-Diam (LED) v11
PSOC- Diam STAGE_PVT v0x30
I thought I should HARD SPL but freezes on 0%
I read about that issue
tried actually every single SPL in the forum signed and unsigned but it still freezes always at 0%
[UPDATE] I also tried flashing the following ROMs so far:
Eto.X 1.3 WWE
RUU_Diamond_HTC_GER_1.93.407.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
[2nd UPDATE]
I have the device now rested manually (factoryy default )since Vicai was kind enough to tell me how this works but still there no connection between pc and ppc.
this is kind of strange for me since my pc recognizes my touch pro without problems.
[3rd UPDATE]
now it the diamond is listed finaly in windows explorer but still any attempt to do a ROM update or HRD SPL gets STUCK at 0%
[4th UPDATE]
I tried flashing RUU_Diamond_HTC_FRA_1.93.406.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
same thing happens now again stuck at 0%
now I am kind a running out of ideas and would appreciate a little help,..
thx,
s.
dissapointment
I am realy trying to get some help here.
would somebody help me out?
do I do something wrong or am I looking for advice at the wrong place?
s.
well, actually i think there are alot of helpfull ppl round here, but they can't come up with a good solution for your problem. I personally have no clue why you can't run hardSPL.
What i do know is that since the device is not hardSPL'ed it is not possible to flash any rom (even official ones) in another language than the one it came with (French).
What you could try however is flashing an official French ROM, you can download it from here, (look for wiki pages for diamond) or from the official HTC site, and then try to run hardSPL again.
Good luck and i hope things gonna work out for ya.
Nirak said:
What you could try however is flashing an official French ROM, you can download it from here, (look for wiki pages for diamond) or from the official HTC site, and then try to run hardSPL again.
Good luck and i hope things gonna work out for ya.
Click to expand...
Click to collapse
thats what I am going to do, I just did't try so far because my french is realy bad but I allready downloaded the french rom to try.
thank you,
s.
mm I think the only solution is flash a rom original French and then try to put HSPL, I use 1:40 OliNex