Related
Hello,
I executed the Hard SPL cab and went into bootloader or some sort of a multi colored screen which says IPL - 0.50 Trin100 and underneath it says SPL 3.03.0000. It connects to my computer and says USB but when I attempt to flash the new WM6 rom which I just downloaded from the rapidshare it resets the machine and continues to remain on this screen of multi colored stuff. I cannot seem to get out of it no matter what I do. What do i need to do to abort the multi colored screen or allow it to flash my HTC trinity with the Dopod WM6 rom?
Thanks,
Gilbert
PS: please don't shoot me if this was discussed elsewhere. i searched and could not fine anyting
happened to me yesterday.
with this screen install AGAIN the hard....
see
http://forum.xda-developers.com/showthread.php?t=316113
and
http://forum.xda-developers.com/showthread.php?t=312499 -page 45
How? I try to execute again the Hard SPL file and it gives me an error and says close window on PC.
Thanks,
Gilbert
it keeps giving me error in connection and i think i bricked my phone i tried to reinstall several times and i get the same results. Poor me.
Same hapen to me, then ive tried to instal over it a another rom and it came to life.
if you're in the bootloader already, try and run the RUU (update program) again on your pc after reconnecting your device.. if that doesn't work, please give details of the error. I don't think you're bricked yet
racerx_ said:
if you're in the bootloader already, try and run the RUU (update program) again on your pc after reconnecting your device.. if that doesn't work, please give details of the error. I don't think you're bricked yet
Click to expand...
Click to collapse
Thanks for your help. I get Error 260:
The update utility cannot connect to your pda. please check usb is connected. click exit to quit.
When I try to run the upgrade alone in XP it starts at 1% then resets the bootloader.
Thanks,
Gilbert
k which upgrade are you running? still trying to get hard spl working, or running the Dopod WM6 upgrade?
*i've been having some troubles upgrading today too, with the WM6.. scary times ha*
racerx_ said:
k which upgrade are you running? still trying to get hard spl working, or running the Dopod WM6 upgrade?
*i've been having some troubles upgrading today too, with the WM6.. scary times ha*
Click to expand...
Click to collapse
I am trying to upgrade the
RUU_Trinity_DOPODASIA_WWE_3.00.707.17_6275_1.46.00.11_108_Ship but i also tried to reflash the 1.23 HTC rom with GPS to see if it would flash since my device is an HTC trinity and not dopod but the same thing keeps happening.
Try to flash PDAVIET version, my came to life doing this
have you tried to flash any other ROM? I was stuck with the same thing, but managed to flash a cooked ROM..
what's your bootloader showing?
if you fail to flash any other ROM, i think you need to try the stack overfow exploit posted here.. http://forum.xda-developers.com/showthread.php?t=308691&highlight=error+206
it's a bit technical, but i think it's your best bet if all else fails.. Pof might be able to help you over there
No matter what i do, what rom i try to flash i get the same damn error message: Error 260 - Connection!!! I am connected so I don't what is wrong with it. I will try some more then decide to take a hammer and break it into 1000 peices.
Thanks.
racerx_ said:
have you tried to flash any other ROM? I was stuck with the same thing, but managed to flash a cooked ROM..
what's your bootloader showing?
if you fail to flash any other ROM, i think you need to try the stack overfow exploit posted here.. http://forum.xda-developers.com/showthread.php?t=308691&highlight=error+206
it's a bit technical, but i think it's your best bet if all else fails.. Pof might be able to help you over there
Click to expand...
Click to collapse
My bootloader is showing the following:
Trin100
IPL-0.50
Trin100
SPL-3.03.0000
Thanks for all your help.
hmmm... i'm not familiar with that SPL number... unless somehow that got halfway updated with the WM6 update.
I think you better head to that thread and try the stack exploit. Did you try loading a cooked ROM to see what happens?
that is it. i give up. i am not experienced in messing with codes. i am going to retire the device for good and use a regular phone. this is crap. thanks for ur help.
oh, that is the SPL version of the new ROM... i guess you weren't using hard spl when you tried to flash it?
ha, well don't give up too quick.. that's one expensive retired device you've got there.
Just keep cool and you should try to install an official Rom to downgrade this SPL !!
Gilbert said:
I will try some more then decide to take a hammer and break it into 1000 peices.
Thanks.
Click to expand...
Click to collapse
Help!
My bootloader is showing the following:
Trin100
IPL-1.00
Trin100
SPL-9.99.CP
When upgrading with the new released WM6 ROM, it keeps failing at 28%
Please help!
best bet for you, is load a different ROM now. Either cooked or official. That will get your device out of crash-proof spl bootloader.
Once the ROM is loaded, if you want to try the official wm6 again, run SSPL first and see if it'll work for you
p.s. i pm'd you my handphone number in case you've got trouble still..
Gilbert said:
My bootloader is showing the following:
Trin100
IPL-0.50
Trin100
SPL-3.03.0000
Thanks for all your help.
Click to expand...
Click to collapse
Hi Gilbert,
Im having exactly the same problem as you. Right now im in the middle of flashing it back down to WM5 (its working at the moment at 17%).
Hopefully after this i will be able to flash back to WM6 (Most probably will go back to AX3L for now).
Hope this helps you out (im quite stressed about it too!)
Edit: I have just finished flashing to Official WM5, now flashing back to AX3L WM6. It works!
Help
Have read as much info as i can about bricked phone.
Have no radio working shows no gsm on boot
It apears that i can flash to any rom with out a radio, if i flash to one that includes it its stops at 11 - 13% and comes up with an error message 262.
have olipro 2.30 and hardslp7
if i try to flash radiio rom only it wont and stays at 0% until errror message 262
so its a 1a
but not having any luck
please help as this was my dads phone
its an orange spv3100/ herms 100
try reinstalling a stock rom. might work but if you cant install a radio it looks like you have a nice pda but not a phone anymore...
No Not really
The only reason i was having to reflash the phone was that it was locking up all the time, even having flashed the phone it was having problems with Tom Tom.
Please HELLP!
Can some one please advise me on this situation,
is there any way of sorting this out?
stock orange m3100 rom wont flash
Just tried standard orange m3100 rom
it stops at 12% and wont continue,
seems any rom with a radio wont flash past 12/13%
any radio free rom is fine
it wont flash radio only roms
PLEASE HELP
Have you tried flashing radio only?
photoscubaman said:
Just tried standard orange m3100 rom
it stops at 12% and wont continue,
seems any rom with a radio wont flash past 12/13%
any radio free rom is fine
it wont flash radio only roms
PLEASE HELP
Click to expand...
Click to collapse
Have tried radio only roms,
they wont work at all and stays at 0%
have olivpro 2.30 and hardspl7
thought this was ment to prevent bricking?
no, it improves chances of recovering a brick but wont stop it from happening. It loks like your radio is corrupted. You might have to bite the bullet and tell your dad his phone no longer works... sorry for the bad news...
have you tried flashing a rom with radio included through yur sd card. had same issue and this worked for me.
If ya can't install a radio, sounds like your stuck with a pda and not a phone.
Have you tried a number or radio's?
As ultramag69 says
no, it improves chances of recovering a brick but wont stop it from happening. It loks like your radio is corrupted. You might have to bite the bullet and tell your dad his phone no longer works... sorry for the bad news...
Click to expand...
Click to collapse
using hardsplv7 improves chances of recovering, but nothing is 100%
If you flash your phone with manufacturers rom and get everything back to original, see if orange or manufacturer will fix it under warranty or insurance. THIS IS A LAST RESORT AS IF THEY DIG DEEP AND KNOW YOU HAVE MESSED WITH PHONE, THEY'LL DO NOTHING FOR YOU!!!
Personally I have returned phone once due to not being able to receive or make calls. I flashed original rom etc but forgot to put original radio back on. They never noticed and I got my phone back fixed. But this is a BIG RISK.
have now managed to get spl 1.01 on the phone
trying to change to spl 1.04 and reflashing!
however now when i task 32
it has
level FF not Level 0???
any ideas??
shamless bump
Isnt there anybody that can help me?
please
photoscubaman said:
have now managed to get spl 1.01 on the phone
trying to change to spl 1.04 and reflashing!
however now when i task 32
it has
level FF not Level 0???
any ideas??
Click to expand...
Click to collapse
Ditto.
Is there anyway of fixing the corrupted radio? is there no way to "re-write" the radio bootloader?
obviously the radio bootloaders have changed over the different versions of the roms so why cant we "re-construct" the bootloaders in this fashion?
Referring to :HERMES Bootloader 1.01 MFG (WIKI) I cant use the "Flashing SPL-1.04 again" method because my radio is corrupted, so, I lose SuperCID, and don't have access to the lnb command; is there a SPL-1.04.nbS that we can use?!
If there is, would it allow us to use a radio of that version? or is this mute?
I've read several threads and the wiki several times, but, it seems this corrupted radio issue is something new that the wiki's are partially addressing, or, whatever has caused the radio to suddenly become corrupt requires a new method to fix it.
I know i've said I've read the forums, wiki, but perhaps I've missed something? Any assistance is appreciated!
I was wondering if any body had spl 1.04 on their mini sd card?
the method were you just transfer over to the mini card and click on it.
i managed to change my boot loader to version 1.01 this way.
if i can change it to 1.04 can i flash to radio with out it stopping.
thanks
just solved exact problem
Hi
i have been dealing with the same problem for 4.5 hours finally with the help of wiki and pof 's posts i managed to unbrick radio.
first of all i tried almost evceryting. i finally succeed by reseting radio sector. i used mtty to gel into hermes and used commands of one of pof's posts for erasing radio sector.
i dont remember the link but google xda for it. then i flashed tweaked version wich is inclueded in unlocker by pof i aborted the operation in unlocking phase then installed hardspl7
i can use my phone now radio version is 1.10 sth but i didnt tried to install newer radio ( too tired :=) )
i hope it is usefull if anything not clear PM me or write here....
PS:Many many thanx to pof...
bartan
bartan said:
Hi
i have been dealing with the same problem for 4.5 hours finally with the help of wiki and pof 's posts i managed to unbrick radio.
first of all i tried almost evceryting. i finally succeed by reseting radio sector. i used mtty to gel into hermes and used commands of one of pof's posts for erasing radio sector.
i dont remember the link but google xda for it. then i flashed tweaked version wich is inclueded in unlocker by pof i aborted the operation in unlocking phase then installed hardspl7
i can use my phone now radio version is 1.10 sth but i didnt tried to install newer radio ( too tired :=) )
i hope it is usefull if anything not clear PM me or write here....
PS:Many many thanx to pof...
bartan
Click to expand...
Click to collapse
This link you speak of is of high importance!! what were the commands? what was the link?
http://forum.xda-developers.com/archive/index.php/t-280372.html
but after installing radio 1.47 it happened again in one call.
still in square one ....
No SD-card install works (stucks in GSM)
no shipped rom works
i want to ask if there is anyway to erase the whole radio sector ??
rerase command did not work on my hermes may be pof has some solution to this.
bartan
After lots and lots of reading the wiki's and forums over and over again I believe I may have solved the radio corruption problem on my 8525.
Just to let everyone know that I've tried flashing several SPL's; 1.01 MFG, 1.04, 1.10 Oli, 2.10 Oli, 2.60 Oli. Back and forth between the versions but finally I stayed put at 1.10.
I have/had a type 1a brick, but, not from flashing, everything was working great and then it just died. I tried Method 1 of Problem 5: Device shows NO GSM when booting more times then i would like to remember, however, nothing worked. When i tried a Radio only flash it failed at 0% and when i tried a FULL RUU it failed at 12/13% (GSM.nb). Convinced I had a $500 paper weight I got angry tried Method 2 of Problem 5 (see above link) ... strangely on the first try i was able to see the radio (1.40.30.00) and the protocol version as well...
I then thought this was too good to be true and then soft-reset my phone; BAM! "NO GSM".... I tried several times and then finally got the version readouts again... So i soft-reset into bootloader mode
Code:
typed: info 2
returned: HTCS
typed: task 32
returned: Level = 0
typed: rtask b
returned: AT-Command Interpreter ready <--------- YES!!!
I was then able to get enter the AT/Radio Commands so i did what anyone else would do.... FLASH ANOTHER RADIO!!!
I flashed the Radio from HTC_Hermes_SIM_Unlock_v2a and it just finished... I got an error at the end, and after the soft-reset the version stayed 1.40.30.00, but once booted into WM6.1 it immediately picked up the 3G signal... I hope this lasts longer then others have reported.
Should i try to flash another radio that is radio_bootloader 108???
*sigh* ... froze in WM6.1 reset then "No GSM" again... so then i tried HTC_Hermes_SIM_CID_Unlock_v3a but it failed because I kept getting No GSM; so i did the battery trick to get version info's then ran the .bat as instructed and it perfomed the unlock; this time it reflected the radio 1.16.0.0
since I know what it takes to get the radio to flash, i'm trying RUU_Hermes_CINGULAR_WWE_3.62.502.3_6275_1.54.07.00_108_UOOS_SVN05_Ship.exe ..... i mean what do i have to lose right?
[EDIT] it worked... so lets see what happens.... [/EDIT]
[EDIT2] Radio is 1.54.07.00 & Protocol is 32.86u.7020.23H ... so it looks like its perm now... I've been able to send and recieve calls now too.... [/EDIT2]
after several hours of usage, radio no longer responds and WM becomes unstable and after a soft-reset I get "No GSM" ...
Question to Olipro, Des, pof:
Is it possible to log the beginning bootup screen to see what exactly triggers the "No GSM" vs the radio/protocol versions?!?! there has to be something that were missing... it would seem ever since radio 108 this problems have arisen... comments?
Hello,
I am trying to flash my Diamond radio with RUU and radio 10.0.25.05 and my ROM is bElite v0.95 Premium.
I have flashed my ROM without problem but i can't manage to flash my radio. Eadch time i am launching flash process for radio, the process is beginning but stops at 0% and it fails because of a connection problem (error 262)
Could someone tells me what is the problem and helps me?
I have searche d everywhere in the forum. I ve heard about a unsigned and signed SPL. Maybe it's the same trick about RUU and I haven t got the good one...? Could someone just give me a link to the radio version 10.0.25.05 and to the Diamond Custom RUU I could use?
I am afraid to brick my phone...
Thanks for you answer
Please...
Does someone can help me?
it seems my problem can come from vista drivers. I foud a topic :
http://mahmood1.com/upgrade_pocket_pc_ruu_in_vista.aspx
But even folowing the instructions my update is still locked at 0% and tells me an error 262.
I ve done the whole instructions and installed the old driver but no matters. Somebody knows a way to solve my problem?
cdfr31 said:
Hello,
I am trying to flash my Diamond radio with RUU and radio 10.0.25.05 and my ROM is bElite v0.95 Premium.
I have flashed my ROM without problem but i can't manage to flash my radio. Eadch time i am launching flash process for radio, the process is beginning but stops at 0% and it fails because of a connection problem (error 262)
Could someone tells me what is the problem and helps me?
I have searche d everywhere in the forum. I ve heard about a unsigned and signed SPL. Maybe it's the same trick about RUU and I haven t got the good one...? Could someone just give me a link to the radio version 10.0.25.05 and to the Diamond Custom RUU I could use?
I am afraid to brick my phone...
Thanks for you answer
Click to expand...
Click to collapse
Using signed Hard-SPL?
Use this this to flash your radio : http://htcroms.aplace4u.biz/signed/radio/Diamond_Radio_1.00.25.05.rar
Hi Corian,
Thnaks to you I ve finaly flashed my radio!
Your trick was the good one.
Now I am trying to install a new rom casue i dont like the 0.95 bepe elite.
I have exactly the same problem with every flash i am attempting. It stays at 0% and tells me a 262 error.
My SPL is olinex 1.30.
Could you tell me whats the best and if you can give me the link to download the good files.
I d like to install an official HTC Rom and maybe for this i have to change the SPL?
Thanks for your great help.
HI,
Finally I have solved all py problems.
The problem was coming from the hard SPL I had installed.
I ve managed to change the hard spl which wasn t possible. I had to force the mode bootloadrer and then the hard spl was flashed and replaced by 1.40 Olinex unsigned.
Then I flashed rom and radio and splash screen without any problem.
In fact the whole thing about drvier Vista wasn t the problem I think.
Thanks to Corian who helped me to identify the source of the problem : incompatibility with hard spl taking only signed things.
Hi i have a HTC TD device and I am traing to update rom from 1.93.401.2 to 2.03.401.2 but not sucssesifuly and at the end of update update utility shows this massage : 270 update error , the image file is corrupted, please check youre update utility.
This is frustrating because i tried all possibilities to fix a problem and still nothing, does anybody have any expirience with something like this to help me thanks a lot.
have you tried downloading the rom again?
Is your device locked by provider? If yes, you have to hardspl.
nickytheshaft said:
have you tried downloading the rom again?
Is your device locked by provider? If yes, you have to hardspl.
Click to expand...
Click to collapse
Yes I have tried all available posibilities : Hard Reset, changeing radio, and it is not locked by provider because first time i was sucssesifuly updated and then i saw olinex and i instaled that one after olinex there is no way to instal 2.03.401.2 I think that olinex is my problem but i do not have any idea to remove it because i have tried all available options and this is my 5th day that i am fighting with that and still i did not find any solution but anyway THANKS A LOT and get back to me soon if you know how to resolve this.
Diamond-HD said:
Yes I have tried all available posibilities : Hard Reset, changeing radio, and it is not locked by provider because first time i was sucssesifuly updated and then i saw olinex and i instaled that one after olinex there is no way to instal 2.03.401.2 I think that olinex is my problem but i do not have any idea to remove it because i have tried all available options and this is my 5th day that i am fighting with that and still i did not find any solution but anyway THANKS A LOT and get back to me soon if you know how to resolve this.
Click to expand...
Click to collapse
I seem to remember that error 270 means that you need to udate your bootloader, Try flashing an updated HardSpl.
And remember olinex has two spl's, one for gsm and one for cdma, they are not interchangeable.
thanks
Thank you i solved my problem i have know that olinex is for gsm and cdma i am fixed with hard spl 1.34 and now work perfect and after this long problem resolving now i know everithing about rom because i have try everything THANKS A LOT AND STAY GOOD AS WHOLE THIS SITE IS THANKS AGAIN
Error 270 when flashing to 2.03 stock firmware
I had the exact same problem. I went out on a limb and try something different and it worked! When you have just completed a fail upgrade (you see the 3 colored bars on your phones screen) quit the firmware update software, soft reset phone, re-connect to computer, and immediately flash to hard spl 1.34 signed. When finished the phone will reboot to and viola, you will have the latest firmware installed. At this point you can put back on the latest spl (1.40 I think) so that you can load custom ROM's. Just remeber if you want to get back to the latest stock ROM from HTC you have to rollback to the 1.34 SPL. Hope this helps peeps.
hello , i have an spv m3100, i try to upgrade it from 5.0 to WM 6.1 but something has gone wrong and now i cant restart my phone.
i have done this before as well many time but this time was an unfortunate one.
not very familiar with the technical terms but when i tried to hard reset again my phone , nothing happens really and i see this tri color screen red, green and blue
and it says
Herm100
IPL-1.01
Herm100
SPL 1.11
I need some urgent help please!
Would be much thankful.
try flashing an official rom first the flash hard spl v7 it can even support flashing the rom from sd card
hope this helps
and how do i realli get an offical rom ? my hermes is orignally on orange network and thats where i have bought it from
read my rom threads bud almost last pages some ppl are for sure that you can flash the original ATT stock stripped ROM with that method