I'm getting constant errors when trying to install any Sense HD ROMs. I've partitioned my SD and all that, rooted, S-OFF'ed, running on Sense HBOOT. The latest error I'm getting is:
E:Can't chown/mod /system/xbin
(No such file or directory)
E:Failure at line 93:
set_perm_recursive 0 200 0755 0755 SYSTEM:xbin
Installation aborted.
I have no idea what's going on.
You need Bravo stock image, not bravo sense.
Finally worked, I was wondering what the hell was wrong, thanks a lot man.
+1
Related
Hi. I had Oxygen 1.0 installed with N1 Table. I fancied a change back to a HD Sense Rom - therefore I changed back to the Sense Partition Tables within S-Off. However when attempting to install the rom I keep getting an error message:-
E: Can't chown/mod /system/xbin
(No such file or directory)
E: Failure at Line 24:
set_perm_recursive 0 2000 0755 0755 SYSTEM:xbin
I have done a search and discovered I may need to reflash my SPL?
How is this done?
Regards
Andy
do you have an ext partition? hd roms are to big and the don't just fit in NAND, so they mostly require you to have an ext partition atleast 512mb.
murdoch1 said:
Hi. I had Oxygen 1.0 installed with N1 Table. I fancied a change back to a HD Sense Rom - therefore I changed back to the Sense Partition Tables within S-Off. However when attempting to install the rom I keep getting an error message:-
E: Can't chown/mod /system/xbin
(No such file or directory)
E: Failure at Line 24:
set_perm_recursive 0 2000 0755 0755 SYSTEM:xbin
I have done a search and discovered I may need to reflash my SPL?
How is this done?
Regards
Andy
Click to expand...
Click to collapse
okay i have been using the new MIUI rom for about a week has been giving me problems as of late so i decided to flash a diff rom.i went thru the routine steps of wiping data,dalvik,cache and etc.. when i tried to flash the finisher rom by magnus recieved an error that says "E:can't chown/mod/system/xbin/busybox (no such file or directory) E:faliure at line 74:set_perm 0 0 04755 system:xbin/busybox
then trying OTA Supersonic 3.70.651.1-"E:can't symlink/system/bin/cat E:failure at line 11:symlink toolbox system:bin/cat"
OTA supersonic 3.29.651.5-"File_getprop:failed to stat "/system/build.prop "no such file or dire E:unknown command [ctory] E:Error in /sdcard/ota_supersonic_3.29.651.5.zip (Status 7)
Fresh Rom 3.5.0.1-writing boot.assert failed:write_raw_image ("/tmp/boot.img"."boot") E:error in /sdcard/fresh-evo-3.5.0.1.zip (status 7)
MYN Warm 2.2 rls-4- E:can't symlink/system/xbin/[E:failure at line 15:symlink busybox system:xbin/[
MIUI Evo-12.11-E:can't symlink/system/xbin/[e:failure at line 10:symlink busybox system:xbin/[
Calkulins evio 2 rom- installs with no problems where the problem lies is when i reboot it stays on the stock splash screen (HTC EVO White) left it for an hour and never boots completley pulling battery and retrying results in the same also if it helps using amon RA-evo-v1.8.0
any help wil be greatly appreciated
Hey guys,
I've got a problem with my clockworkmod recovery! The last days my DHD began to freeze after unlocking the screen. The only solution was to remove the battery and do a restart. The time of using my phone become shorter and shorter till today I could only unlock my SIM card and then it froze. After that I wanted to flash an update of my firmware Revolution HD.
I got an error:
Flashing boot.img...
assert failed: write_raw_image("/tmp/boot.img","boot")
E: Error in /sdcard/Software/Android_Revolution_HD_4G_3.0.zip
(Status 7)
Installation aborted
When I want to restore with an old backup it says:
Erasing boot before restore...
E:format_volume: no MTD partition "boot"
Error while formatting BOOT: !
E: can't open /cache/recovery/log
E: can't open /cache/recovery/log
E: can't open /cache/recovery/last_log
E: can't open /cache/recovery/last_log
Maybe someone got the same error? Or maybe someone has got an idea to solve my problem?!
Thank you guys!
EDIT:
If I want to "wipe cache partition" there's the same error:
E:failed to mount /cache (invalid argument)
E: Can't mount /cache/recovery/command
E:failed to mount /cache (invalid argument)
E:Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E:failed to mount /cache (invalid argument)
E: Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
E:failed to mount /cache (invalid argument)
I have the same exact problem, I am trying to switch ROMs but I want to install CWM 3 over 2.5.1.0. It's giving me the same exact error when I wipe or try to flash anything. No solution yet..
Please inform me if you have a solution....!
I tried to downgrade with this guide:
http://forum.xda-developers.com/showthread.php?t=905003
But it is without success.
Don't know if it would work to format the cache and flash a new cwm version via fastboot...:-S
No ideas guys?
First we have to know about your S-OFF, do you have Radio S-OFF, ENG S-OFF, SuperCID?
If you have ENG S-OFF, you can try flashing ClockworkMod again in fastboot. I will write you instructions if it comes to that.
If you have Radio S-OFF & SuperCID, we can inject stock ROM into your phone via a PC, or load it from the SD card in bootloader.
Hey jkoljo!
Thank you for helping!
My DHD has permroot, ENG and RADIO S-OFF, HBOOT and SuperCID. A flashed different CWM's. It worked, but the error was the same - with all versions of CWM.
I tried to flash the RUU with this guide:
http://forum.xda-developers.com/showthread.php?t=905003
The first two steps worked fine:
adb push psneuter /data/local/tmp
adb push misc_version /data/local/tmp
But in the next line:
adb shell chmod 777 /data/local/tmp/psneuter
...there is an error. It says "no directory"
Today I have to assert that my sdc failed. With an adapter I put it into my laptop. First of all I backuped the whole card. Formated it and then I wanted to copy just the important files. There was an unkown error and after that I had no access. I formated it again but while copying there was the same error. I want to try flashing the RUU with another sdc, but don't have another one at home.
In which mode should I try to flash it? In the guide you should choose charge only and debugging enabled, but as you know my DHD does not boot!
You do not need to do those psneuter commands etc, just put the PD98IMG.zip into your SD (try to get a working card) and reboot to bootloader.
Doesn't I have to install it via CWM? Just reboot the bootloader?!
Should I copy the *.zip into the root of the sdc for that?
Not in CWM, in the bootloader. And yep, put the PD98IMG.zip into the root of the SD.
Mh...bootloader started the update. But while updating the Radio_v2 it hang up. It was working about an hour but it was frozen. And now I cannot start the phone...
Think there is no other way to send it to the support isnt it? :-S
Pull the battery and try again, if that fails again, try replacing the PD file, with a new copy, it may have gone bad/corrupt along the way, if that fails, I'm stumped. But I'm sure there's more that could be done without having to send it back to HTC.
I cannot switch the phone on. No bootloader, no CWM - just the black screen. It will not work to copy a new PD-File on my sdc. And I'm absolutly sure that the PD-File is not damaged - I downgraded it with the same file some weeks ago :-S
Hi developers
I am developing my first ROM. I'm using dsixdas Android Kitchen. It's a mysense rom. I have only change some Images. Now when i flash the rom, there is the follow fail:
Code:
Copying Files...
E:Can't chown/mod /system/etc/bluz
(no such file of directory)
E:Failure at line 384:
set_perm_recursive 1002 1002 0755 0440 System:etc/bluz
Installation aborted.
Can someone help me?
have someone an idea?
try toggle verification
and how can i toggle verification?
can i do this with disxda's Android Kitchen?
Maybe you shouldn't be cooking a ROM you might break your phone lol
Sent from my HTC Desire using XDA Premium App
tischn said:
and how can i toggle verification?
Click to expand...
Click to collapse
You do that form recovery. If you are. Just find toggle signature verification, and click it. It should say signature verification disabled
tischn said:
Hi developers
I am developing my first ROM. I'm using dsixdas Android Kitchen. It's a mysense rom. I have only change some Images. Now when i flash the rom, there is the follow fail:
Code:
Copying Files...
E:Can't chown/mod /system/etc/bluz
(no such file of directory)
E:Failure at line 384:
set_perm_recursive 1002 1002 0755 0440 System:etc/bluz
Installation aborted.
Can someone help me?
Click to expand...
Click to collapse
ehm, the error message is clear:
E:Can't chown/mod /system/etc/bluz
(no such file of directory)
did you check if the directory exists in the folder structure of your rom?
Hypercaine said:
You do that form recovery. If you are. Just find toggle signature verification, and click it. It should say signature verification disabled
Click to expand...
Click to collapse
i'm using the ClockworkMod Recovery v2.5.0.7 but i can't find anywhere.
greg17477 said:
ehm, the error message is clear:
E:Can't chown/mod /system/etc/bluz
(no such file of directory)
did you check if the directory exists in the folder structure of your rom?
Click to expand...
Click to collapse
jes i did, but i isn't there.
Is that only a folder, than i can create?
Hi all.
I have a new issue. I'm close to restoring my htc 816 desire, but when I do a CWM backup it gets stuck:
Checking MD5 sums....
Erasing boot before restore....
Restoring boot image....
Restoring system....
Can't mount /system!
Does anyone know a way to get around not being able to mount /system.
ajcbrown said:
Hi all.
I have a new issue. I'm close to restoring my htc 816 desire, but when I do a CWM backup it gets stuck:
Checking MD5 sums....
Erasing boot before restore....
Restoring boot image....
Restoring system....
Can't mount /system!
Does anyone know a way to get around not being able to mount /system.
Click to expand...
Click to collapse
Flash stock recovery, wipe /system there. Then reflash cwm.
FoxyDrew said:
Flash stock recovery, wipe /system there. Then reflash cwm.
Click to expand...
Click to collapse
Hey foxy, thanks for the advice.
I'm not sure if I can find the stock recovery though. Are you sure it needs to be stock? Can I just have any cwm recovery and format the /system in it?
Edit: Alternately, would the stock recovery be the one inside the cwm backup?
Does anyone know whether I need the stock recovery to format /system? Even with CWM Recovery it should just wipe the OS no? And there's no OS on there currently so it shouldn't affect my ability to boot into cwm or fastboot?
ajcbrown said:
Does anyone know whether I need the stock recovery to format /system? Even with CWM Recovery it should just wipe the OS no? And there's no OS on there currently so it shouldn't affect my ability to boot into cwm or fastboot?
Click to expand...
Click to collapse
Well before performing a restore you should wipe all partitions. But I had assumed you already tried that. So if that doesnt work, you need to flash the stock recovery, which can be found here. Wipe /system there.
If you don't know how to flash a recovery, google it.
And no the stock recovery isn't inside the backup.
FoxyDrew said:
Well before performing a restore you should wipe all partitions. But I had assumed you already tried that. So if that doesnt work, you need to flash the stock recovery, which can be found here. Wipe /system there.
If you don't know how to flash a recovery, google it.
And no the stock recovery isn't inside the backup.
Click to expand...
Click to collapse
Pardon my ignorance, still learning it all. When you say wipe all partitions, are you saying wipe /data, /cache, /radio and so on? The previous time I tried to recover it was getting stuck at checking md5 sums which I solved by wiping the cache.
EDIT: NEVERMIND, googled my partition question. All good
Okay, how do i wipe any partitions in stock recovery? All I get is a phone symbol with a red triangle and excalamation mark on it.
http://i.imgur.com/1fXDo3w.jpg
^ Is this meant to be the stock recovery?
ajcbrown said:
http://i.imgur.com/1fXDo3w.jpg
^ Is this meant to be the stock recovery?
Click to expand...
Click to collapse
Yes
FoxyDrew said:
Yes
Click to expand...
Click to collapse
Thanks, I couldn't find that you needed to hold down the volume up button and tap power to get the blue menu thing. Only found it on HTC One forums :S.
ajcbrown said:
Thanks, I couldn't find that you needed to hold down the volume up button and tap power to get the blue menu thing. Only found it on HTC One forums :S.
Click to expand...
Click to collapse
It seems like whenever I can mount /system, my recovery will crash after a few actions are performed . And it doesn't crash when I can't mount /system. I've tried wiping the partitions, not sure what else I can do unless changing to TWRP would fix anything, don't know if it would though.
Anyone got an idea of how I can get around /system being a pain? I'm almost out of ideas. I don't get it, the internal sd card isn't broken because I can push files to it, but I can't mount /system even after formatting it
Also: Stock recovery only gave me the option of wiping data and cache, not system.
FoxyDrew said:
Yes
Click to expand...
Click to collapse
Hey bud, I might need your help a bit further
1: I don't think the cwm restore I was using is the correct one because /system won't mount at all when I try to install it.
2: I tried installing this instead: http://forum.xda-developers.com/showthread.php?t=2712315 . I flashed the boot.img that comes in the rom download, not the seperate boot.img listed because I can't download it from that chinese site, and then installed the rom and it installs fully but boots back into HTC logo and doesn't progress.
3: Could I fix my issues with an OTA update? I now know how to install them using stock recovery, but I don't have the OTA update on my phones internal memory. Is there a manual download?
ajcbrown said:
Hey bud, I might need your help a bit further
1: I don't think the cwm restore I was using is the correct one because /system won't mount at all when I try to install it.
2: I tried installing this instead: http://forum.xda-developers.com/showthread.php?t=2712315 . I flashed the boot.img that comes in the rom download, not the seperate boot.img listed because I can't download it from that chinese site, and then installed the rom and it installs fully but boots back into HTC logo and doesn't progress.
3: Could I fix my issues with an OTA update? I now know how to install them using stock recovery, but I don't have the OTA update on my phones internal memory. Is there a manual download?
Click to expand...
Click to collapse
What model do you have?
FoxyDrew said:
What model do you have?
Click to expand...
Click to collapse
816x dual sim international version. As far as I can tell, it's /system causing problems. If it mounts, my recovery crashes after I select a few things, when I can't mount it the recovery won't crash. If I flash twrp or Philz recovery it crashes after i select one thing :/. I'm confused as to whether it's a fixable software issue or a hardware issue, because right now I cannot boot into any rom.
I took a look at the log file when installing the following rom: http://forum.xda-developers.com/showthread.php?t=2712315, the concerning things I found are:
set_perm: chown of /system/vendor/media to 0 2000 failed: No such file or directory
set_perm: chmod of /system/vendor/media to 755 failed: No such file or directory
set_perm: chown of /system/vendor/pittpatt to 0 2000 failed: No such file or directory
set_perm: chmod of /system/vendor/pittpatt to 755 failed: No such file or directory
set_perm: chown of /system/vendor/pittpatt/models to 0 2000 failed: No such file or directory
set_perm: chmod of /system/vendor/pittpatt/models to 755 failed: No such file or directory
set_perm: chown of /system/vendor/pittpatt/models/detection to 0 2000 failed: No such file or directory
set_perm: chmod of /system/vendor/pittpatt/models/detection to 755 failed: No such file or directory
set_perm: chown of /system/vendor/pittpatt/models/detection/multi_pose_face_landmark_detectors.7 to 0 2000 failed: No such file or directory
set_perm: chmod of /system/vendor/pittpatt/models/detection/multi_pose_face_landmark_detectors.7 to 755 failed: No such file or directory
set_perm: chown of /system/vendor/pittpatt/models/detection/yaw_roll_face_detectors.6 to 0 2000 failed: No such file or directory
set_perm: chmod of /system/vendor/pittpatt/models/detection/yaw_roll_face_detectors.6 to 755 failed: No such file or directory
set_perm: chown of /system/vendor/pittpatt/models/recognition/face.face.y0-y0-22-b-N.bin to 0 0 failed: No such file or directory
set_perm: chmod of /system/vendor/pittpatt/models/recognition/face.face.y0-y0-22-b-N.bin to 644 failed: No such file or directory
set_perm: chown of /system/xbin/vold to 0 2000 failed: No such file or directory
set_perm: chmod of /system/xbin/vold to 755 failed: No such file or directory
set_perm: chown of /system/lib/modules/s2w_mod.ko to 0 0 failed: No such file or directory
set_perm: chmod of /system/lib/modules/s2w_mod.ko to 644 failed: No such file or directory
set_perm: chown of /system/etc/init.d/KingSenseGMD to 0 0 failed: No such file or directory
set_perm: chmod of /system/etc/init.d/KingSenseGMD to 755 failed: No such file or directory
set_perm: chown of /system/etc/init.d/99superuser to 0 0 failed: No such file or directory
set_perm: chmod of /system/etc/init.d/99superuser to 755 failed: No such file or directory
Is this normal since I have no OS currently, or should it be setting permissions in the system files it should have written?
Interestingly the end of the log ends: "Installer Sucessfull (Status 0)", so I thought that would mean it's all okay.
The only other thing that is probably holding me back from booting into the rom after it's "succesfully installed" is that I can't download the damn boot.img from this link: http://pan.baidu.com/s/1sj0LRRZ , but I'm still concerned about the /system playing up.