Problem flashing ROMS - EVO 4G Q&A, Help & Troubleshooting

okay i have been using the new MIUI rom for about a week has been giving me problems as of late so i decided to flash a diff rom.i went thru the routine steps of wiping data,dalvik,cache and etc.. when i tried to flash the finisher rom by magnus recieved an error that says "E:can't chown/mod/system/xbin/busybox (no such file or directory) E:faliure at line 74:set_perm 0 0 04755 system:xbin/busybox
then trying OTA Supersonic 3.70.651.1-"E:can't symlink/system/bin/cat E:failure at line 11:symlink toolbox system:bin/cat"
OTA supersonic 3.29.651.5-"File_getprop:failed to stat "/system/build.prop "no such file or dire E:unknown command [ctory] E:Error in /sdcard/ota_supersonic_3.29.651.5.zip (Status 7)
Fresh Rom 3.5.0.1-writing boot.assert failed:write_raw_image ("/tmp/boot.img"."boot") E:error in /sdcard/fresh-evo-3.5.0.1.zip (status 7)
MYN Warm 2.2 rls-4- E:can't symlink/system/xbin/[E:failure at line 15:symlink busybox system:xbin/[
MIUI Evo-12.11-E:can't symlink/system/xbin/[e:failure at line 10:symlink busybox system:xbin/[
Calkulins evio 2 rom- installs with no problems where the problem lies is when i reboot it stays on the stock splash screen (HTC EVO White) left it for an hour and never boots completley pulling battery and retrying results in the same also if it helps using amon RA-evo-v1.8.0
any help wil be greatly appreciated

Related

[Q] need help flashing ROM

I have a new evo updated. Rooted with unrevoked and running sprint lovers (PC3IMG) I installed clockworkmod and tried to flash a rom and had problems. I thought that clockworkmod was my problem so I flashed back to my RU recovery. I then went into recovery and wiped data, dalvick, and cache. I then chose install zip from sdcard and then I selected the new Fresh ROM zip. I tried to install it and it goes all the way to Writing boot.img and I get an error that says
assert failed: write_raw_image("/tmp/boot.img","boot")
E:error in /sdcard/fresh-evo-3.5.0.1.zip
(status 7)
Installation aborted.
So then I tried to install Myn’s Warm TwoPointTwo and I get to copying files and I get this error:
E:Can't symlink /system/xbin/[
E:Failure at line 15:
symlink busybox SYSTEM:xbin/[
Installation aborted
I am stumped and dont know what to try next. Anyone know whats going on with these errors?
Just tried to install pc36img from sdcard and I get this after it says installing update:
E:Can't find update script
Installation aborted.
I think that this will only work if I flash it at Hboot and select yes for the update? Either way, I would rather have Fresh as my ROM because I used it on my Hero and I loved it. Any help?
After reading other posts, many say it has to do with the HBOOT size not having enough space??? Its not seeing the boot.img correctly. I have no idea. Anyone have any ideas?

[Q]Constant errors when installing Sense ROMs

I'm getting constant errors when trying to install any Sense HD ROMs. I've partitioned my SD and all that, rooted, S-OFF'ed, running on Sense HBOOT. The latest error I'm getting is:
E:Can't chown/mod /system/xbin
(No such file or directory)
E:Failure at line 93:
set_perm_recursive 0 200 0755 0755 SYSTEM:xbin
Installation aborted.
I have no idea what's going on.
You need Bravo stock image, not bravo sense.
Finally worked, I was wondering what the hell was wrong, thanks a lot man.
+1

[Q] Problem with CWM Recovery

Hey guys,
I've got a problem with my clockworkmod recovery! The last days my DHD began to freeze after unlocking the screen. The only solution was to remove the battery and do a restart. The time of using my phone become shorter and shorter till today I could only unlock my SIM card and then it froze. After that I wanted to flash an update of my firmware Revolution HD.
I got an error:
Flashing boot.img...
assert failed: write_raw_image("/tmp/boot.img","boot")
E: Error in /sdcard/Software/Android_Revolution_HD_4G_3.0.zip
(Status 7)
Installation aborted
When I want to restore with an old backup it says:
Erasing boot before restore...
E:format_volume: no MTD partition "boot"
Error while formatting BOOT: !
E: can't open /cache/recovery/log
E: can't open /cache/recovery/log
E: can't open /cache/recovery/last_log
E: can't open /cache/recovery/last_log
Maybe someone got the same error? Or maybe someone has got an idea to solve my problem?!
Thank you guys!
EDIT:
If I want to "wipe cache partition" there's the same error:
E:failed to mount /cache (invalid argument)
E: Can't mount /cache/recovery/command
E:failed to mount /cache (invalid argument)
E:Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E:failed to mount /cache (invalid argument)
E: Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
E:failed to mount /cache (invalid argument)
I have the same exact problem, I am trying to switch ROMs but I want to install CWM 3 over 2.5.1.0. It's giving me the same exact error when I wipe or try to flash anything. No solution yet..
Please inform me if you have a solution....!
I tried to downgrade with this guide:
http://forum.xda-developers.com/showthread.php?t=905003
But it is without success.
Don't know if it would work to format the cache and flash a new cwm version via fastboot...:-S
No ideas guys?
First we have to know about your S-OFF, do you have Radio S-OFF, ENG S-OFF, SuperCID?
If you have ENG S-OFF, you can try flashing ClockworkMod again in fastboot. I will write you instructions if it comes to that.
If you have Radio S-OFF & SuperCID, we can inject stock ROM into your phone via a PC, or load it from the SD card in bootloader.
Hey jkoljo!
Thank you for helping!
My DHD has permroot, ENG and RADIO S-OFF, HBOOT and SuperCID. A flashed different CWM's. It worked, but the error was the same - with all versions of CWM.
I tried to flash the RUU with this guide:
http://forum.xda-developers.com/showthread.php?t=905003
The first two steps worked fine:
adb push psneuter /data/local/tmp
adb push misc_version /data/local/tmp
But in the next line:
adb shell chmod 777 /data/local/tmp/psneuter
...there is an error. It says "no directory"
Today I have to assert that my sdc failed. With an adapter I put it into my laptop. First of all I backuped the whole card. Formated it and then I wanted to copy just the important files. There was an unkown error and after that I had no access. I formated it again but while copying there was the same error. I want to try flashing the RUU with another sdc, but don't have another one at home.
In which mode should I try to flash it? In the guide you should choose charge only and debugging enabled, but as you know my DHD does not boot!
You do not need to do those psneuter commands etc, just put the PD98IMG.zip into your SD (try to get a working card) and reboot to bootloader.
Doesn't I have to install it via CWM? Just reboot the bootloader?!
Should I copy the *.zip into the root of the sdc for that?
Not in CWM, in the bootloader. And yep, put the PD98IMG.zip into the root of the SD.
Mh...bootloader started the update. But while updating the Radio_v2 it hang up. It was working about an hour but it was frozen. And now I cannot start the phone...
Think there is no other way to send it to the support isnt it? :-S
Pull the battery and try again, if that fails again, try replacing the PD file, with a new copy, it may have gone bad/corrupt along the way, if that fails, I'm stumped. But I'm sure there's more that could be done without having to send it back to HTC.
I cannot switch the phone on. No bootloader, no CWM - just the black screen. It will not work to copy a new PD-File on my sdc. And I'm absolutly sure that the PD-File is not damaged - I downgraded it with the same file some weeks ago :-S

[Q]

Hi.
I rooted my HTC One X. In order to install a firewall. I'm using Clockwork Mod Recovery v.5.8.4.0 and the HTC RUU.
A few months ago a new software update was released (4.20.415.4) but I can't install it. After downloading the zip file my phone reboots, but the recovery shows the following messages:
Clockwork Mod Recovery v.5.8.4.0
E: Invalid command argument
E: Invalid command argument
Finding update package...
E: unknown volume for path [INTERNALSDCARDownload/OTA_ENDEAVOR_U_JB_50_S_HTC_ARA_4.20.415.4-4.20.415.3_release_370360.zip]
E:Can't mount INTERNALSDCARDownload/
OTA_ENDEAVOR_U_JB_50_S_HTC_ARA_4.20.415.4-4.20.415.3_release_370360.zip
Installation aborted.
Any Suggestions?
yaya_abed said:
Hi.
I rooted my HTC One X. In order to install a firewall. I'm using Clockwork Mod Recovery v.5.8.4.0 and the HTC RUU.
A few months ago a new software update was released (4.20.415.4) but I can't install it. After downloading the zip file my phone reboots, but the recovery shows the following messages:
Clockwork Mod Recovery v.5.8.4.0
E: Invalid command argument
E: Invalid command argument
Finding update package...
E: unknown volume for path [INTERNALSDCARDownload/OTA_ENDEAVOR_U_JB_50_S_HTC_ARA_4.20.415.4-4.20.415.3_release_370360.zip]
E:Can't mount INTERNALSDCARDownload/
OTA_ENDEAVOR_U_JB_50_S_HTC_ARA_4.20.415.4-4.20.415.3_release_370360.zip
Installation aborted.
Any Suggestions?
Click to expand...
Click to collapse
you're phone has to be stock for the update to work, unroot it and flash the stock recovery

CWM error (my first time)

i was using a nightly version of cm11 but i wanted to use a snapshot on my GT-i9190 i flashed it to stock ROM(tur) but i think i forget the uncheck F. reset time on odin after flashing stock rom i flashed CWM and root-kitv2 but suddenly supersu stops working i updated it from playstore and it backed to working normal but at the flashing CM11-Snapshot it says;
E:Error in /sdcard/0/cm-11-20141112-SNAPSHOT-M12-serrano3gxx.zip
(status 7)
Installation aborted
minzip: extracted file ''/system/xbin/vim''
ApplyParsedPerms: removexattr of /system/etc/install-cwm-recovery.sh to 0 failded: operation not supported on transport endpoint
script aborted: set_metadata_recurvise: some changes failded
E:Error in /sdcard/0/cm-11-20141112-SNAPSHOT-M12-serrano3gxx.zip
(status 7)
Installation aborted
I:using /data/media for /sdcard/0/clockworkmod/.recovery_version.
I:using /data/media for /sdcard/clockworkmod/.recovery_version.
I: can't partition on non v-fat: datamedia
I: can't partition on non v-fat: auto
I: can't format unknown volume: /emmc
what i should to do now?
UPDATE
i was really bored and i flashed original rom again after that flashed philz touch recovery and at the end flashed cm 12 w/o gapps it said stupid things at the start but it works perfect now have nice day!

Categories

Resources