I could connect all of my other android phones to my car stereo with the usb. But now it isn't working at all for me with the GSII.
Thinking maybe I need to put the music on the internal storage and not the microsd?
Silent25r said:
I could connect all of my other android phones to my car stereo with the usb. But now it isn't working at all for me with the GSII.
Thinking maybe I need to put the music on the internal storage and not the microsd?
Click to expand...
Click to collapse
That's a great question, but, I think the reality of the situation will be worse than that as it doesn't mount as a disk drive in quite the same way. I'm sure AOSP roms can address this, but, until then I'm not so sure.
Silent25r said:
I could connect all of my other android phones to my car stereo with the usb. But now it isn't working at all for me with the GSII.
Thinking maybe I need to put the music on the internal storage and not the microsd?
Click to expand...
Click to collapse
when you plun in your ET4G to your stereo you should be able to navigate to the external sd card
on your phone its under
/sdcard/external_sd
i hope this helps.
OP, were you able to fix this issue? I'm having the same problem with my Epic 4g Touch. Unfortunately, my clarion cz300 stereo does not allow me to navigate to any folders. It automatically scans the entire sd card for MP3 and WMA files.
you should PM him and ask him to reply in this thread for us all to see.
Try going into the settings to wireless and network > USB utilities. press the button to connect as a storage device. This works for me. Can't remember if I was able to switch it before or after I connected the USB cord. It's been a while since i've had to use it. Let me know if that works.
Sent from my SPH-D710 using XDA App
cpcormier3 said:
Try going into the settings to wireless and network > USB utilities. press the button to connect as a storage device. This works for me. Can't remember if I was able to switch it before or after I connected the USB cord. It's been a while since i've had to use it. Let me know if that works.
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
Thanks, but I've already tried that to no avail. I've read through 20+ threads and tried every single suggestion. I'm starting to think my phone is not compatible with the stereo.
Argh so I'm following these guides to the letter and I still can't get this to work.
I've got everything installed correctly , I change the Master address for the controller on my PC, everything goes fine up until I unplug the controller from the PC and hit the Power button on the controller for it to pair with my phone. all 4 lights just flash on the controller and eventually go off and do nothing. Now while that happens, the phone says "Client connected:1" like its suppose to. But the controller is not connected and will not do anything at all.
I than plug it back into the computer and it seems whenever I unplug it, the master change doesn't save and it goes back to its default BT address.
I'm assuming the problem is because the master won't stick OR that's just because the controller isn't connecting to the device so it resets itself to its last known use? Thing is, the controller is brand new and has never been used on a PS3 since I don't own one.
Anyone have any insight on this? Spent $35 for the controller and another $2 for the app and can't use it at the moment :/
NOTE: My phone is the sprint GSIII despite what my sig says due to build.prop changes
EDIT: the compatibility checker indicated its compatible.
Do I need a USB OTG cord to connect it for the controllers first time being synced to a device maybe? Don't have a ps3 to connect it to unfortunately.
little bump, i have no useful information other than i read there was a way to pair the 2 using only the phone, not sure where i saw it tho, maybe on a youtube video on setting up sixaxis?
Im very interested to see if this works, as i want very badly to play n64 and other games on my projector with the mhl adapter, instead of having to use the usb for the controller, i would try it but don't own a sixaxis controller atm.
I did it with the otg cable with out a pc took me a minute to get but it worked. so I unplugged it. It is now wireless so I tried to Play dead trigger and a couple of other games and the controls wouldn't work right I was able to control the phone from the ps3 controller but no games and with the controller plugged in via otg cable games worked great
Sent from my SGH-T999 using xda premium
I have the AT&T version but I am sure they both work the same way.
Make sure you grab the correct bluetooth address from your phone, says it at the bottom of the phone in the app.
Then download the drivers and sixaxis pair tool application on the PC, make sure they are installed! Grab your PS3 dualshock controller and connect it to your PC. It should go through installing the drivers/making sure you have them installed, once its complete your current controllers master will be shown at the top. You need to change it so that it reads the same as your mobile phones address.
Once that is complete go back to your phone, open up the program and start the driver, now hold the ps button until you see it sync, if it isn't syncing then you have a problem with the address of either your phone or controller.
Or...
You can actually make a cheap OTG cable yourself with stuff you probably have laying around the house. All you need is an USB extender cable and a micro USB cable, along with some wire and a soldering kit.
http://forum.xda-developers.com/showthread.php?t=1076767
When I used the app with my nexus s I had to use the computer tool, now with the galaxy all I had to do was plug it in with an otg cable, pair, and make sure you change the input method. Now I just start the app, press start on the app turn the controller on and it pairs instantly.
mastarifla said:
I have the AT&T version but I am sure they both work the same way.
Make sure you grab the correct bluetooth address from your phone, says it at the bottom of the phone in the app.
Then download the drivers and sixaxis pair tool application on the PC, make sure they are installed! Grab your PS3 dualshock controller and connect it to your PC. It should go through installing the drivers/making sure you have them installed, once its complete your current controllers master will be shown at the top. You need to change it so that it reads the same as your mobile phones address.
Once that is complete go back to your phone, open up the program and start the driver, now hold the ps button until you see it sync, if it isn't syncing then you have a problem with the address of either your phone or controller.
Or...
You can actually make a cheap OTG cable yourself with stuff you probably have laying around the house. All you need is an USB extender cable and a micro USB cable, along with some wire and a soldering kit.
http://forum.xda-developers.com/showthread.php?t=1076767
Click to expand...
Click to collapse
Yeah I got everything down but for some reason the controller isn't saving the master change. As soon as I unplug it from the PC after changing it, it goes right back to its default master. I continue to press the button on it anyway to pair with my phone and my phone said Client connected: 1 like its suppose to, but the controller lights just keep flashing another 5 seconds and it shuts off.
Assuming the master change isn't working. Tried both the new and old .exe's on the dev's site for the PC pair tool. :/
So if I get an OTG cord, I can do the initial pair with that and than it will pair wirelessly from there on out or I have to always use it with the cord that way?
Thanks guys.
Sent from my GT-I9000 using xda app-developers app
enjoy, skip to 3min mark, he also explains how to get the controller to work with games that don't have controller support
nonmindo said:
enjoy, skip to 3min mark, he also explains how to get the controller to work with games that don't have controller support
Click to expand...
Click to collapse
Isn't a valid link
EDIT: got the link to work after all, and god its so easy with a OTG cable... hahah. Guess that's my best bet since this thing keeps being so stubborn about saving the master change when I do it on the PC. -.-
Sent from my GT-I9000 using xda app-developers app
Ironically I tried the to pair the ps3 tool yesterday too.While the compatibility tester says it works yet I can't pair.I changed the Bluetooth address and installed the driver it just doesn't work.
Ironically I tried the to pair the ps3 tool yesterday too.While the compatibility tester says it works yet I can't pair.I changed the Bluetooth address and installed the driver it just doesn't work.
Click to expand...
Click to collapse
Ah sorry to hear that, glad I'm not alone though.. Overnighted a otg cable since I don't have the parts needed to make my own haha
Sent from my GT-I9000 using xda app-developers app
SemiGamer said:
Yeah I got everything down but for some reason the controller isn't saving the master change. As soon as I unplug it from the PC after changing it, it goes right back to its default master. I continue to press the button on it anyway to pair with my phone and my phone said Client connected: 1 like its suppose to, but the controller lights just keep flashing another 5 seconds and it shuts off.
Assuming the master change isn't working. Tried both the new and old .exe's on the dev's site for the PC pair tool. :/
So if I get an OTG cord, I can do the initial pair with that and than it will pair wirelessly from there on out or I have to always use it with the cord that way?
Thanks guys.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Have you tried using another PC program like MotionJoy? Downloading their drivers to see if you can change the master address with it instead? That would be my next suggestion if you are having issues with the master not sticking, obviously the best option would be to connect it to a PS3 first to make sure you at least have a default master.
If this doesn't work let me now, I'll try to think up some other ways before you have to purchase a cable to make it work.
mastarifla said:
Have you tried using another PC program like MotionJoy? Downloading their drivers to see if you can change the master address with it instead? That would be my next suggestion if you are having issues with the master not sticking, obviously the best option would be to connect it to a PS3 first to make sure you at least have a default master.
If this doesn't work let me now, I'll try to think up some other ways before you have to purchase a cable to make it work.
Click to expand...
Click to collapse
Yeah I tried motion joy and the controller works great wired to the computer (Works on the PC I mean) but I don't have a Bluetooth adapter for my PC to pair it with unfortunately.
Note that whenever I sync the controller to MotionJoy, I'm unable to use that USB port with SixaxisPairTool because MotionJoy drivers were installed with that port and motionjoy instantly picks it up and makes it unrecognizable to the sixaxistool program (Uninstalling motionjoy solves this) but just thought I'd throw it out there.
I clicked BluetoothPair in motionjoy and the BT address shows different than the one Sixaxistool shows, when I choose Custom Master or whatever it says and type in my phones, it "changes" it on the screen and says it changed, I than unplug it from the PC and start the app on the phone, Press the PS button on the controller and the 4 lights blink, the phone says Client connected:1, but the lights all keep blinking and than shut off. If pressed again the blink than turn off. I than connect it back to the PC and the BT address is shown as the default one from before I choose custom.
Pretty much the Change Master only stays while its connected to the PC, soon as I unplug it the master resets. I verified that by changing it, closing the programs (Both motionjoy and sixaxistool, at separate times of course during their own individual attempts) and than reopen either program and it shows what I changed it to still. But like I said as soon as the cord comes out it resets.
Sorry for the wall of text, just trying to provide as much info as I can. I ordered a cable but that can always come in handy anyway and I'd like to see if we could still solve this without one maybe to save some cash for anyone that has this problem in the future ya know!
Sent from my GT-I9000 using xda app-developers app
I know there was an issue with MotionJoy with having to put the address in "backwards" before it paired, I don't know if that was fixed or if that is still an issue. It's odd that it works fine when you plug it in to the PC but once you try wireless, it resets... I guess it's because you have yet to use the controller AS a bluetooth device, it has always been a wired connection. So you either have to pair it with a ps3, or with another bluetooth device.
Maybe you should just wait on the cable haha
mastarifla said:
I know there was an issue with MotionJoy with having to put the address in "backwards" before it paired, I don't know if that was fixed or if that is still an issue. It's odd that it works fine when you plug it in to the PC but once you try wireless, it resets... I guess it's because you have yet to use the controller AS a bluetooth device, it has always been a wired connection. So you either have to pair it with a ps3, or with another bluetooth device.
Maybe you should just wait on the cable haha
Click to expand...
Click to collapse
Hahah yeah I pulled enough of my hair out and gave in on the cord thanks for trying though! I agree its probably related to being a new unused controller.
Sent from my GT-I9000 using xda app-developers app
Argh okay got the cord. Controller works fine as a game pad. Works flawlessly on ShadowGun and Dead trigger which both have game pad function built in.
Can not get it to connect via Bluetooth still..
Tried exactly what the video showed and such.
Only thing I can think of is the controller could possibly be dead? Which I doubt because all the trouble shooting I've been doing (Connected to PC for an hour trying to get motion joy to go, connected to my phone the past 15min, I even plugged the USB into my wall adapter for my phone to see if it charged. Lights just blink than go off after like 5minutes. That mean its charged or what? Don't have a ps3, does it need one to charge? :/
Sent from my GT-I9000 using xda app-developers app
SemiGamer said:
Argh okay got the cord. Controller works fine as a game pad. Works flawlessly on ShadowGun and Dead trigger which both have game pad function built in.
Can not get it to connect via Bluetooth still..
Tried exactly what the video showed and such.
Only thing I can think of is the controller could possibly be dead? Which I doubt because all the trouble shooting I've been doing (Connected to PC for an hour trying to get motion joy to go, connected to my phone the past 15min, I even plugged the USB into my wall adapter for my phone to see if it charged. Lights just blink than go off after like 5minutes. That mean its charged or what? Don't have a ps3, does it need one to charge? :/
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Is this an OEM Sony Controller? Chinese fakes aren't going to work. Same thing with Wii remote clones.
kronium said:
Is this an OEM Sony Controller? Chinese fakes aren't going to work. Same thing with Wii remote clones.
Click to expand...
Click to collapse
I think its OEM? How would I go about checking?
It was this one:
www.amazon.com/gp/aw/d/B0015AARJI/ref=mp_s_a_1?qid=1341986008&sr=8-1
But it wasn't the Amazon seller by default when I got it, it was a seller named Wireovia, they've got 4.8 stars with 3559 ratings so I didn't really think much of them being fakes? Price was $39 though I don't see them in the list of sellers now, but they were default before.
Also the controller didn't come with a cord, is that a sign of a fake or is that the same with Sony's official?
Sent from my GT-I9000 using xda app-developers app
EDIT: Well crap. I was looking at "How to spot a fake" guides and they mention two definite ways of telling, one being the battery inside is different and another being there is no screw under the sticker on the back on the official, whereas the fakes have a screw under there.
Now mine has what looks to be a screw without a screwable head on it under the sticker. Maybe the new fakes have the head of the screws taken off because they knew it gave it away? Idk. Going to take it apart tomorrow and see the battery.
Anyone know if its possible to return an opened item? Purchased June 29th received it on July 3rd. It came with an amazon lable saying "Returning is easy, go to our website blah blah blah" but mentioned it being unopened. Hmm..
Call Amazon's 800 number and tell them this isn't a genuine controller, and is giving you pairing difficulties. You don't have to say what kind. Ha ha. You should get your money back no problem.
Can others on the Canadian gsiii variants download the Sixaxis app from the market? Play thinks it's not compatible with my device (d2can / rogers).
I remember from before this app had issues working on devices running sense or touchwiz ui and I had problems with it on my stock vibrant and sgs2 but it runs well on aosp based roms.so today I flashes aokp r3 and low and behold it works now! Played
Dead trigger flawlessly earlier.T-Mobile sgs3 btw.
I've searched around to different forums and haven't really gotten a clear answer for this. I used to be able to play my music from my iphone simply by connecting it to my usb plug in my car. the sgs3 doesn't do that. I've read it is because it uses mtp instead of ums for data transfer now because there are no partitions in the drive. Supposedly there is a way to use ums by an app that was created for the i9300, but I have the US sprint model and I wonder if that would work on my phone. Plus I would like to know if I use this app, will it even solve my problem? Will I be able to listen to my tunes in my car without connecting the audio aux plug?
Thanks in advance,
Leefordss said:
I've searched around to different forums and haven't really gotten a clear answer for this. I used to be able to play my music from my iphone simply by connecting it to my usb plug in my car. the sgs3 doesn't do that. I've read it is because it uses mtp instead of ums for data transfer now because there are no partitions in the drive. Supposedly there is a way to use ums by an app that was created for the i9300, but I have the US sprint model and I wonder if that would work on my phone. Plus I would like to know if I use this app, will it even solve my problem? Will I be able to listen to my tunes in my car without connecting the audio aux plug?
Thanks in advance,
Click to expand...
Click to collapse
I would like to know this too, My car radio doesn't have bluetooth support, so it's not an option for me and it doesn't work when I plug the phone in. This is the only thing keeping me from getting rid of my iPod!
I'm curious about this too. I just bought a Sony for its Sirius capabilities and it has Pandora support but I would like to listen to my phone's MP3 catalog too.
sent through the third galaxy
I just replaced my car stereo thinking I could use the USB in, I couldn't get it to work by default.
I'm left with using the aux in, which is nothing more than a stop gap solution.
Hoping that I can get it to work with usb too
Edit :
I forgot to try system >accessories >usb audio
I'll try when I get out of work.
2nd edit :
Didn't work
Sort of the same issue, compounded.
I have a 2012 volt and an S3/I9300 international version. I can't get it to play audio in my car for love or money. No roms, just stock...but bluetooth and auxiliary fails. Bluetooth says it doesn't recognize it, auxiliary jack says everything is hooked up but I get no sound.
I also have a bluetooth soundbar in my home; the phone connects fine but the sound comes through the phone still rather than the speakers. I feel like I'm missing something pretty basic here. Any help/guidance would be much appreciated. If there is an app that will fix this I'm totally game. Also anything to get rid of the samsun apps login that is constantly annoying me, or the German news sides that are preinstalled.
I'm a wreck lol. Love the phone otherwise though (other than ATT delivering my text messages roughly 72 hours after they were sent...all at once, from 3 to 6 am, like clockwork. I switched to t-mobile).
Wrong section dude, you want the international forums, this one is for the sprint variant only
I would suggest searching for usb input on the stereo and making sure its selected as the playback device. My ford fusion has bluetooth and usb but when i use usb i have to select it on the stereo to actually play music from my phone. Hope this helps...:good:
Running CM10 if that matters but wondering how I might get this to work. Only reason is so that I can hook my phone up to my car audio via usb cable (dont have bluetooth in my car). Ive confirmed USB Mass Storage works on an old Atrix
Thanks all!
This is about as close as its gonna get
http://forum.xda-developers.com/showthread.php?t=1711009
Sent from my SGH-I747M using xda premium
The latest CM10 Nightly has USB audio. Under Settings, advanced, audio.
Sent from my SAMSUNG-SGH-I747 using xda premium
Yes I had that checked already and still is not playing on my headunit. However an older Atrix with UMS plays just fine.
Unless there is something on CM10 I need to do at the time I wish to play things?
Looks like I was enabled USB Dock Audio but there is a setting for UMS in CM10. Going to test on my drive home today. Thanks
sorry to revive a older thread, did this work for ums? i have a deck that wont read a s3, i am hoping to figure out a way to use it