Develop Bugs

[Q] sd card not reading

Sd card stopped reading on g2 and I've tried the following:
Used different sd cards, still nothing detecting.
And sd card reads fine on my computer via card reader
Tried a master reset
My question is since its still under warranty and this model I have has been rooted with s off, will they charge me for the full replacement fee? I've already called tmobile to get a replacement. Phone works fine its just not reading the sd cards I place in the slots.

Its not under warranty if you rooted it....that being said its up to you. I dont think they have time to check. they just wipe em check hardware and see if they should refurb or trash.
Sent from my HTC Vision using XDA App

That sucks, you can use fastboot to apply update.zip files so I would try that(maybe get a brick and say it was from the update)
Sent from my T-Mobile G2 using XDA App

I understand that its against warranty if the phone is rooted but the cause of the SD read isn't a software issue its a hardware issue. With that being said I've been doing some research and it seems that its better if i somehow brick the phone, but I did call them up today, or well the tmobile sales rep did and told them that the sd card wasn't being read. Has anyone used warranty on a rooted phone?

Also is there a way to unroot without being able to use the SD card?

Not wanting to postwhore, but I turned off the phone and left it there off for a good 15 minutes, then rebooted and somehow the sd card's reading atm so now going to follow these steps to unroot the phone before returning it.
http://www.addictivetips.com/mobile/how-to-unroot-t-mobile-g2-htc-desire-z-complete-guide/

One could argue that the non approved software broke the hardware.... just sayin......
Sent from my HTC Vision using XDA App

nguyen925 said:
Also is there a way to unroot without being able to use the SD card?
Click to expand...
Click to collapse
fastboot has a command to apply an update.zip(as i posted above)

g_grey said:
fastboot has a command to apply an update.zip(as i posted above)
Click to expand...
Click to collapse
is this going to update the phone through zip file? Will that turn on S off?

shortlived said:
One could argue that the non approved software broke the hardware.... just sayin......
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
True but seems like i'm the only one with this particular issue. I don't see how rooting my phone would lead to an SD card reading malfunction. Both of which are unrelated..

i have not tried it since i don't have a problem with my sdcard reader, but the fastboot binary has an option to apply a zip file via the terminal on your computer. so as long as you can read and do a little research you should be ok to try it(worst case you brick your phone and you're done)

update*
I sent in my phone even though it was perma-rooted, and got tmobile to replace it free of charge. Not sure how that worked out but phone's been fully functional since.

Has anybody returned a rooted/unlocked phone?

Due to the issues in my other post (http://forum.xda-developers.com/showthread.php?p=24049918#post24049918)
I'm likely going to have to return my phone. And because I can't get any computer to recognize the phone, I can't de-root/re-lock the phone.
I'm wondering if anyone's heard what happens when a rooted/unlocked phone is returned. I know it voids warranty - I'm just wondering if anybody's ever tried and gotten away with it.

Try this
https://play.google.com/store/apps/details?id=eu.chainfire.mobileodin.pro
Sent from my Galaxy Nexus using xda premium

Wow mobile Odin....now I think I have seen everything in terms of apps. I never thought I would see an app for odin.

Great idea - thanks!
I must admit, I don't really understand how to use ODIN - I've read their website and the XDAforums page on it, and I'm still a bit confused.
How do I find the firmware files to flash on to the phone? They don't seem to be included. And once I find them, how do I get them on to the SD card?
If I'm not mistaken, can you even remove the SD card from the phone?

ianian28 said:
If I'm not mistaken, can you even remove the SD card from the phone?
Click to expand...
Click to collapse
I wouldn't have a clue for your former question but for this, there isn't a physical SD card in the Galaxy Nexus, just a virtual SD card that is really just a partition.

ianian28 said:
Great idea - thanks!
I must admit, I don't really understand how to use ODIN - I've read their website and the XDAforums page on it, and I'm still a bit confused.
How do I find the firmware files to flash on to the phone? They don't seem to be included. And once I find them, how do I get them on to the SD card?
If I'm not mistaken, can you even remove the SD card from the phone?
Click to expand...
Click to collapse
Nope - no physical SD card in our Gnex
You could use Airdroid for example to get the files on your "sd card"
edit: never used Odin - but I THINK these are the images you're after: http://code.google.com/intl/nl-NL/android/nexus/images.html

You could try chain fires other app supersu which can perminatly unroot your phone. Dont think you can relock bootloader without a PC though https://play.google.com/store/search?q=supersu&c=apps
Sent from my Galaxy Nexus using Tapatalk

No matter how much flashing you do from the device, you must have a computer to actually re-lock it once it's stock. So without a computer, you won't be able to fully lock it again sadly.

ianian28 said:
Due to the issues in my other post (http://forum.xda-developers.com/showthread.php?p=24049918#post24049918)
I'm likely going to have to return my phone. And because I can't get any computer to recognize the phone, I can't de-root/re-lock the phone.
I'm wondering if anyone's heard what happens when a rooted/unlocked phone is returned. I know it voids warranty - I'm just wondering if anybody's ever tried and gotten away with it.
Click to expand...
Click to collapse
I think its simply
"You're not doing it right"
You've had it connect when it wasn't rooted so its probably a driver issue on your computer.

use dropbox or a bluetooth connection to your computer to get the files onto the phone.

Evostance said:
I think its simply
"You're not doing it right"
You've had it connect when it wasn't rooted so its probably a driver issue on your computer.
Click to expand...
Click to collapse
Read this and cry: http://code.google.com/p/android/issues/detail?id=23789#makechanges

Stuck in APX!

First of all sorry for adding yet another question onto the Q&A, but researching around I can not find much information on this problem.
So anyway I've been having the following problems with my HOX, and now to add to it all Im stuck in APX mode. I left my phone powered off in my bag and when I went to look at it later on I noticed it was stuck on the HTC Boot screen, and the back of the device was VERY warm (battery?) I got it home and plugged into USB and the device just came under APX and as I'm sure you've read, nothing seems to get out of it so I am stuck (Cant enter bootloader)
However;
When I have the device plugged in and hold power+vol up I get the USB connection sounds played in windows, first the new device one (DUN DIN) followed after a second by (DUN DUN) the unplugged sound. THIS time I unplugged between sounds and left he phone for about a minute, plugged it back in and I only heard the new device sound, and now instead of APX my phone is listed under USB Controllers>Unknown Device. Not sure if this is an improvement or not? But I'm hoping its gaining charge from this and will attempt to restart in a while and see if I can enter the bootloader.
Does anyone have any suggestions here?

APX mode means it's dead, nobody here has recovered their phone from that.
An actual brick, sorry.

yeah, that's right, APX is = to seriously hard HW damage...

BenPope said:
APX mode means it's dead, nobody here has recovered their phone from that.
An actual brick, sorry.
Click to expand...
Click to collapse
matt95 said:
yeah, that's right, APX is = to seriously hard HW damage...
Click to expand...
Click to collapse
You're kidding? I can't believe this it was powering on and working (slightly) earlier today! I thought I saw a post
saying someone got out of it just by leaving it for a while

GOOD GOD
I plugged it into charge, left it for about 5 minutes and it has booted back into the phone!!
Resolved I guess

[★] said:
I plugged it into charge, left it for about 5 minutes and it has booted back into the phone!!
Resolved I guess
Click to expand...
Click to collapse
Flash it to stock ASAP, I suspect it's on its way out, and you'll want to use the warranty.

BenPope said:
Flash it to stock ASAP, I suspect it's on its way out, and you'll want to use the warranty.
Click to expand...
Click to collapse
I'm on 1.28 so I cant flash it to stock! Or can I?

[★] said:
I'm on 1.28 so I cant flash it to stock! Or can I?
Click to expand...
Click to collapse
You can install a nandroid backup of stock ROM, boot.img, stock recovery, and relock.

BenPope said:
You can install a nandroid backup of stock ROM, boot.img, stock recovery, and relock.
Click to expand...
Click to collapse
Ok thanks, I have a couple questions though:
I have looked around and can't find a nandroid backup for my CID HTC__001, however I did just find this thread which claims it is possible without a nandroid backup! Am I right?
Also, I'm assuming this wont revert hboot to an older version will it? So won't HTC (if i send it in for repair) see the later hboot and
just work out that I have obviously unlocked my bootloader at some point? Also won't the bootloader say Relocked as appose to
Locked?
Cheers pal!

Yes, you're right, but if it gets stuck on APX, none of that'll matter, unless it manages to magically work again whilst at the repair centre, in which case at least you have HTC signed software on it, so it should be covered.

BenPope said:
Yes, you're right, but if it gets stuck on APX, none of that'll matter, unless it manages to magically work again whilst at the repair centre, in which case at least you have HTC signed software on it, so it should be covered.
Click to expand...
Click to collapse
Ok, you say atleast I will have HTC signed software on it, but still redundant considering it will be 'RELOCKED' right?
On on a side note, member Vcek says that my initial issue sounds more hardware related, so if everything goes tits
up again I may just try invoke the hardware warranty, which apparently isn't effected by unlocking the bootloader

[★] said:
Ok, you say atleast I will have HTC signed software on it, but still redundant considering it will be 'RELOCKED' right?
On on a side note, member Vcek says that my initial issue sounds more hardware related, so if everything goes tits
up again I may just try invoke the hardware warranty, which apparently isn't effected by unlocking the bootloader
Click to expand...
Click to collapse
It's not redundant, they have been known to refuse warranty when unsigned software is installed. It'll make your life easier to install stock software before sending it off to HTC.
It depends where you bought it, but often the retailer is responsible, not HTC, so HTC would be within their rights to refuse a repair if you don't meet their terms. The retailer might not be able to refuse, though. Either way, I'm advising you on creating your own luck.

BenPope said:
It's not redundant, they have been known to refuse warranty when unsigned software is installed. It'll make your life easier to install stock software before sending it off to HTC.
It depends where you bought it, but often the retailer is responsible, not HTC, so HTC would be within their rights to refuse a repair if you don't meet their terms. The retailer might not be able to refuse, though. Either way, I'm advising you on creating your own luck.
Click to expand...
Click to collapse
Ok well I bought it off Amazon so I will get in contact with them in terms of hardware faults. Surely they will need some sort of proof?

[★] said:
Ok well I bought it off Amazon so I will get in contact with them in terms of hardware faults. Surely they will need some sort of proof?
Click to expand...
Click to collapse
I dunno, in the UK, you're pretty safe. Great consumer protection laws.
The phone is less than a year old, so HTC won't need any proof of purchase, but ask Amazon what to do with it.

BenPope said:
I dunno, in the UK, you're pretty safe. Great consumer protection laws.
The phone is less than a year old, so HTC won't need any proof of purchase, but ask Amazon what to do with it.
Click to expand...
Click to collapse
Ok will do.
Stuck in APX mode again.

Odin/PC Doesnt Recognize device, Stuck on boot screen

Hello,
I just purchased my new Galaxy S2 4G from Virgin Mobile. First thing I did was install USB drivers, root it, flash a new PDA and Bootloader from Odin.
Now when I try to boot my phone I get stuck on
"SAMSUNG SII
Yellow Triangle"
I can boot into download and Clock Work Mod recovery and I think I can utilize a external micro SD to recover from. However I can't flash anything else from Odin as drivers seem to be messed up. I have uninstalled, reinstalled Samsung and Sprint drivers, tried different USB slots and everything.
Although it may be a driver problem as the drivers now fail to update when installing them, as it says "Universal Serial Bus (USB) Controller - No Driver Found"
Anyway for me to force reinstall those drivers or something?
Could I get a stock recovery zip or whatever and put that on a micro SD then try?
Help please and thank you!!
EDIT:
Also, I have no recovery images saved to my SD card or anything like that.
EDIT2:
Kies is installed but none of it is running when I start Odin.
EDIT3:
Also, the model is a SPH-D710, version was 4.04. Also that root I linked was the first one I used that worked.
These problems began when I flashed the CWM (I think) as a bootloader from ODIn and then another PDA.
My first thread:http://forum.xda-developers.com/showthread.php?p=37756078#post37756078

If you flashed something in the wrong slot in odin or flashed something for the wronf device you hosed your bootloader and the PC will never recognize the device unless you have it Jtag'd to restore the proper bootloader. JTag is a service you'll have to send off for as it's not something the average user can do themselves at home.
I like to break stuff!

-EViL-KoNCEPTz- said:
If you flashed something in the wrong slot in odin or flashed something for the wronf device you hosed your bootloader and the PC will never recognize the device unless you have it Jtag'd to restore the proper bootloader. JTag is a service you'll have to send off for as it's not something the average user can do themselves at home.
I like to break stuff!
Click to expand...
Click to collapse
So ****, am I screwed? Whats the chance I can return it at Radioshack?

-EViL-KoNCEPTz- said:
If you flashed something in the wrong slot in odin or flashed something for the wronf device you hosed your bootloader and the PC will never recognize the device unless you have it Jtag'd to restore the proper bootloader. JTag is a service you'll have to send off for as it's not something the average user can do themselves at home.
I like to break stuff!
Click to expand...
Click to collapse
Also, what if I could get it to read an external SD card and install from there?
Although I am currently getting a E: Can't mount /sdcard/

You're probably better off paying the $50 to get it jtag'd at mobiletechvideos.com than trying to go thru radio shack. Since the yellow triangle shows that means the flash counter will show at least 1 so they'll deny warranty replacement. The only way ud probably be able to get away with it at radio shack would be if it just wouldn't turn on at all, ie. Hard bricked
I like to break stuff!

-EViL-KoNCEPTz- said:
You're probably better off paying the $50 to get it jtag'd at mobiletechvideos.com than trying to go thru radio shack. Since the yellow triangle shows that means the flash counter will show at least 1 so they'll deny warranty replacement. The only way ud probably be able to get away with it at radio shack would be if it just wouldn't turn on at all, ie. Hard bricked
I like to break stuff!
Click to expand...
Click to collapse
So what you are saying is hardbrick it?

MadMonkey119 said:
So what you are saying is hardbrick it?
Click to expand...
Click to collapse
No, mobiletechvideos.com is what he is suggesting.

BluesRulez said:
No, mobiletechvideos.com is what he is suggesting.
Click to expand...
Click to collapse
I checked it out and think I may go through with it.
Is this the correct service?
http://mobiletechvideos.mybigcommerce.com/samsung-epic-4g-touch-jtag-brick-repair/

MadMonkey119 said:
So what you are saying is hardbrick it?
Click to expand...
Click to collapse
No I wouldn't recommend commiting fraud. I was saying if it was hard bricked by the emmc bug then returning it would be an option but since you can boot to DL mode they can see the custom binary count so unless you get a total idiot they'll just turn u away and flag your account for voided warranty. Mobiletechvideos.com would be the cheapest and easiest route although you'll be without a phone for about a week
I like to break stuff!

-EViL-KoNCEPTz- said:
No I wouldn't recommend commiting fraud. I was saying if it was hard bricked by the emmc bug then returning it would be an option but since you can boot to DL mode they can see the custom binary count so unless you get a total idiot they'll just turn u away and flag your account for voided warranty. Mobiletechvideos.com would be the cheapest and easiest route although you'll be without a phone for about a week
I like to break stuff!
Click to expand...
Click to collapse
Right, right I'm thinking I will do it. Was what I linked to in my last post the correct service for my SPH-D710

MadMonkey119 said:
Right, right I'm thinking I will do it. Was what I linked to in my last post the correct service for my SPH-D710
Click to expand...
Click to collapse
Yeah epic 4g touch d710 model number the letters after d710 are irrelevant they're just carrier identifiers, the hardware is identical in all sph-d710 from sprint, boost, virgin, usc etc
I like to break stuff!

[Q] EZ-Unlock & friend bricked my phone, help needed

My friend decided to use the EZ-Unlock app(link below) that unlocks the bootloader for the verizon galaxy s3 on my i747 and well it is now a brick, is there anything i can do to fix this without a JTAG?

omeadsthename said:
My friend decided to use the EZ-Unlock app(link below) that unlocks the bootloader for the verizon galaxy s3 on my i747 and well it is now a brick, is there anything i can do to fix this without a JTAG?
Click to expand...
Click to collapse
yes, take him outside and beat the crap out of him. Then take his money and go get a new phone.
Other than that, I don't know.
Can you access download mode or recovery?

jack man said:
yes, take him outside and beat the crap out of him. Then take his money and go get a new phone.
Other than that, I don't know.
Can you access download mode or recovery?
Click to expand...
Click to collapse
No I cannot, my friend(parklane79) and I actually found a method, it seems promising but i need to try it out first.
im not afforded the link rights yet but the title is "Fixing a bootloader-bricked Galaxy S3 using an SD card (Qualcomm SGS3 variants)" and a more simpler guide for n00bs(although not a complete n00b been doing this for a few years now :good: ) like myself, "[GUIDE]Unbrick a Hard Bricked SPRINT Galaxy S3 (Without JTAG)" but for the second guide you need to grab the i747 debrick.img off the first page of the first guide.

omeadsthename said:
No I cannot, my friend(parklane79) and I actually found a method, it seems promising but i need to try it out first.
im not afforded the link rights yet but the title is "Fixing a bootloader-bricked Galaxy S3 using an SD card (Qualcomm SGS3 variants)" and a more simpler guide for n00bs(although not a complete n00b been doing this for a few years now :good: ) like myself, "[GUIDE]Unbrick a Hard Bricked SPRINT Galaxy S3 (Without JTAG)" but for the second guide you need to grab the i747 debrick.img off the first page of the first guide.
Click to expand...
Click to collapse
Yea tried with a class 10 16g micro sd like a million times and it wont work.and i think its because i dont have the 4.4.2 img if some one could help me out by uploading it. u et the img via busybox dd if=/dev/block/mmcblk0 of=/sdcard/backup.bin bs=1M count=70

So the phone won't power on at all? Can't get into download or recovery?

are you %100 certain it's the AT&T 4.3 debrick.img? did you put it on the SD card using win32diskimager?

audit13 said:
So the phone won't power on at all? Can't get into download or recovery?
Click to expand...
Click to collapse
The phone won't even vibrate. Wish i could get to DL/Recovery mode. :/
yowski said:
are you %100 certain it's the AT&T 4.3 debrick.img? did you put it on the SD card using win32diskimager?
Click to expand...
Click to collapse
im 100% sure. the issue is tho that i was on 4.4.2 and dont know it an i747(AT&T) 4.3 debrick.img has the same handshake/protocol whatever you want to call it as a 4.4.2 debrick.img I tried it out tho anyways. but in short yes im 100% sure it was a 4.3 debrick img. And yes I did use win32diskimager. I tried once on linux mint but i believe the file corrupted so i just ended up using win32DM. I mean they are supposed to do the same thing, if im not mistaken

omeadsthename said:
The phone won't even vibrate. Wish i could get to DL/Recovery mode. :/
im 100% sure. the issue is tho that i was on 4.4.2 and dont know it an i747(AT&T) 4.3 debrick.img has the same handshake/protocol whatever you want to call it as a 4.4.2 debrick.img I tried it out tho anyways. but in short yes im 100% sure it was a 4.3 debrick img. And yes I did use win32diskimager. I tried once on linux mint but i believe the file corrupted so i just ended up using win32DM. I mean they are supposed to do the same thing, if im not mistaken
Click to expand...
Click to collapse
when you plug it into the computer does anything come up? also, when you plug it in with no battery do you get a red LED?

yowski said:
when you plug it into the computer does anything come up? also, when you plug it in with no battery do you get a red LED?
Click to expand...
Click to collapse
Yes my comp tries to install that one qualcomm driver. and when i plug in without battery a red LED comes on.

omeadsthename said:
Yes my comp tries to install that one qualcomm driver. and when i plug in without battery a red LED comes on.
Click to expand...
Click to collapse
Then you should be able to use a debrick.img. are you using an sd card the same size as your phone's internal memory? if you had it on 4.4.2 then you might need a debrick.img from someone with the same phone on the same network running 4.4.2?

yowski said:
Then you should be able to use a debrick.img. are you using an sd card the same size as your phone's internal memory? if you had it on 4.4.2 then you might need a debrick.img from someone with the same phone on the same network running 4.4.2?
Click to expand...
Click to collapse
yes i am using same size card. and i have been asking all over for a 4.4.2 debrick img but no one has uploaded.

omeadsthename said:
yes i am using same size card. and i have been asking all over for a 4.4.2 debrick img but no one has uploaded.
Click to expand...
Click to collapse
sounds like you're stuck until you get that .img file. If you know someone with the same phone you could maybe get them to install 4.4.2 and get the file from them? otherwise keep asking around or wait until 4.4.2 is released for the s3, which might take a while.

yowski said:
sounds like you're stuck until you get that .img file. If you know someone with the same phone you could maybe get them to install 4.4.2 and get the file from them? otherwise keep asking around or wait until 4.4.2 is released for the s3, which might take a while.
Click to expand...
Click to collapse
Unfortunately kids at my high school are afraid of rooting, so xda is basically my only bet. Im just surprised that some sr member hasnt added a debrick img to their threads. I mean its 4.4 and this is android central!

omeadsthename said:
yes i am using same size card. and i have been asking all over for a 4.4.2 debrick img but no one has uploaded.
Click to expand...
Click to collapse
i would help you out but my S3 is currently hard bricked on stock 4.3 and im sending it back to the insurance company once my S4 arrives tomorrow.

yowski said:
i would help you out but my S3 is currently hard bricked on stock 4.3 and im sending it back to the insurance company once my S4 arrives tomorrow.
Click to expand...
Click to collapse
Cant they find out that you are root and hard bricked? like doesnt that void warranty. and if its a 4.3 h brick cant u just use the sd method?

omeadsthename said:
yes i am using same size card. and i have been asking all over for a 4.4.2 debrick img but no one has uploaded.
Click to expand...
Click to collapse
I did, it was on CM 10.2 when i had flashed improper bootloaders and bricked it. I used the sd card to install 4.3, unroot+ reset flash counter then took it out so it went back to bricked. My only fear is that they may some how get it into download mode instead of just replacing the board and see the warranty bit: 1 which isnt able to be reset as it is an e-fuse which is blown when you install firmware without knox.

yowski said:
I did, it was on CM 10.2 when i had flashed improper bootloaders and bricked it. I used the sd card to install 4.3, unroot+ reset flash counter then took it out so it went back to bricked. My only fear is that they may some how get it into download mode instead of just replacing the board and see the warranty bit: 1 which isnt able to be reset as it is an e-fuse which is blown when you install firmware without knox.
Click to expand...
Click to collapse
Are you using the samsung warranty of AT&T? And also if the sd card is working for u cant you just use odin to flash? Or does the sd card not fix any bootloader issues?

omeadsthename said:
Are you using the samsung warranty of AT&T? And also if the sd card is working for u cant you just use odin to flash? Or does the sd card not fix any bootloader issues?
Click to expand...
Click to collapse
im sending in it through bell mobility. it was a replacement phone that i paid the $150 deductable on and has a 90 warranty. I said it was having issues/defective so they sent an s4 as free replacement on the 90 day. I prefer it to be bricked to fit the defective description as well as to decrease the chances of them finding out i had messed with it, the only real sign being "warranty bit: 1" in red on the download screen. I did use odin to flash the current 4.3 stock that it has right now, and i might be able to get it to boot without the card if i flash the bootloaders some more despite having done it twice and the card still being required. Like i said though, i prefer it hard bricked and i've erased every sign other than warranty bit: 1 that i messed with it by installing stock, unrooting, and resetting flash counter.

yowski said:
im sending in it through bell mobility. it was a replacement phone that i paid the $150 deductable on and has a 90 warranty. I said it was having issues/defective so they sent an s4 as free replacement on the 90 day. I prefer it to be bricked to fit the defective description as well as to decrease the chances of them finding out i had messed with it, the only real sign being "warranty bit: 1" in red on the download screen. I did use odin to flash the current 4.3 stock that it has right now, and i might be able to get it to boot without the card if i flash the bootloaders some more despite having done it twice and the card still being required. Like i said though, i prefer it hard bricked and i've erased every sign other than warranty bit: 1 that i messed with it by installing stock, unrooting, and resetting flash counter.
Click to expand...
Click to collapse
hmm i wish i could do that to my phone too. i mean, i dont even know how i would unroot without getting my phone on. but if im this hard bricked they probs cant tell anyways. im guessing?

uz unlock HARD BRICKING S3'S
omeadsthename said:
My friend decided to use the EZ-Unlock app(link below) that unlocks the bootloader for the verizon galaxy s3 on my i747 and well it is now a brick, is there anything i can do to fix this without a JTAG?
Click to expand...
Click to collapse
I DID THE SAME THING ! but i used debrick (i535 vzw 4.3 ) and it pattially worked at least it will recovery and odin but i think it needs to be the 40 mbps type card the black micro would not work for me , then i flashed the wrong recovery and am starting all over but the debrick still getting me into odin thats ware you will sideload the right recovery and firmware ,rom what ever hope ( i even paid for cdma work shop and it aint did jack ) debrick then odin sideload look it up thats the best i got