Hello, after successfully installing both Nitrogen and TCPMP, I now tried to get AVRCP to work to control the mini with my bluetooth head set. Started with TCPMP: there is a threat here: http://forum.xda-developers.com/showthread.php?t=636423 where all is explained. I downloaded the program itself and the latest interface.plg plug-in from http://forum.xda-developers.com/showpost.php?p=9052904&postcount=637. But iut just does not work! It works with wmp though, but I prefer TCPMP.
After installing the plug-in, I can access the AVRCP settings, but I can't seem to address the buttons on my head set to the actions defined in the plug-in: when I try to do so, it seems to wait for me to press on the buttons of the head set, but when I do that, nothing happens.
Any ideas? Somebody who got it working?
Anyone uses AVRCP with TCPMP?
Hopefully I am not alone. Is there somebody who has been succesful in using AVRCP with TCPMP or Nitrogen?
Related
I've searched around for this and can't find anything, so maybe someone can help to point me in the right direction or let me know that at least the problem is known but not fixed yet.
I can't get Wifi and Bluetooth to work on my 8525 with WM6, currently using Schap's 3.54c rom and radio version 1.48.
I have motorola s805 stereo bluetooth headphones and would like to stream radio over my work's wifi and hear it on my headphones.
The problem is Neither wifi or bluetooth work reliably when used at the same time, (no problems individually). I have even tried reducing the bit pool, but can't take it below 24 because it sounds to bad then, but it still doesn't work.
Anyone have any ideas or can at least verify you have the same problem?
I have the same issue when trying to play internet radio over wifi with my ht820 a2dp linked to the jasjam (Sleuths v2 rom). The only time i ever got a2dp and wifi streaming to work was with the widcomm bt driver that is now extinct.
Thus i have come to the conclusion that the problem is not with the hw but has more to do with the standard ms bt stack.
If anyone has found a workaround please do share
Thats a start
Thanks, that is helpful.
I remember seeing a widcomm stack thread....
http://wiki.xda-developers.com/index.php?pagename=Hermes_Widcomm_stack
I'm going to check that out, also if there is a specific rom that comes with the widcomm stack I'd be interested to know.
I find that with bluetooth turned on I can associate to my Cisco AP at all. As soon as I turn Bluetooth off it works fine.
I had hoped my issue was due to the way the particular WM6 was put together but now Im using offical Dopod and it is the same.
Widcomm stack
Well I found this
http://www.htc-devs.com/uploads/Univ...m_bt_stack.CAB
at the end of the Widcomm stack for Hermes development thread.
I'm not sure where it came from, but I installed it and so far I can use IE while connected to my home wireless network, and listen to music on my headphones.
The com manager will not show bluetooth as being on, but go to settings-bluetooth and you can re-pair.
Currently I'm getting some hiccups, but its working at least. I'll keep you updated and I would still like to see a rom that incorporates this stack so that the com manager works right.
It also changes the headset icon on the top bar.
Streaming!
I'm streaming SomaFM with no problems!
AVRCP problems
I didn't notice this at first, but after the widcomm stack has been installed the AVRCP functions don't work... so Im going back.
AVRCP
It works in WMP, just not audiomanager anymore.
Bricking Blog
Pretty much what this thread has turned into.
If you install that cab above, don't uninstall it, you'll get bricked.
helpful reading
Hello all, well recently I bought some Sony DR-BT20NX headphones under the impression they were the best, so onto the problems:
I'm using leos latest 0.5AKU WM6 Rom and when using them with the default Rom the bluetooth headset can control the music that is pause etc but the music plays for 1 second if that at the beginning of the song then its interference. Any ideas?
Using the Broadcomm stack included in the Rom that you can install after seems to sortany bluetooth problems involving audio but destroys the GSM and the radio crashes 9/10times on boot forcing a soft reboot.
Secondly I'm using on my PC/Notebook with a "Integrated System Solution Corp." Bluetooth dongle with BlueSoleil software provided, with this im able to control WMP like on my device, but I don't even get the second of audio - its completely dead audio wise apart from a dull hiss.
So after paying £60 I'm none the happier with bluetooth
Any help would be appreciated, thanks!
Ok quick update, bluesoleil version 3.2 fails miserably at audio.
Using 5.0.0.0 now and it works.
Whats annoying is I have to pay for this update because they gave me effectively crippled software.
Ok so thats the PC side sorted, just WM6 to go.
Edit:
My USB stick came with version 2.x of the drivers, and when upgrading to 5.x it says the BDID of the bluetooth is already registered. Duh It came with 2.x, oh damnit now I can't get 5.x. Why would a company not want my money
spicypixel
Have you tried only WMP or other players on your Uni? Try CorePlayer and PocketMusic, they also support AVRCP.
P.S. Using a HBH-DS970, no problems with sound... Only problems with WMP sometimes
Had the same issue....installed Jetware Mobile's Handsfree extension and it works flawlessly!!! I use it on my Jabra BT8010 and its the best buy i've ever made!!
dreamtheater39 said:
Had the same issue....installed Jetware Mobile's Handsfree extension and it works flawlessly!!! I use it on my Jabra BT8010 and its the best buy i've ever made!!
Click to expand...
Click to collapse
Jetware causes skips for me
Skwyk said:
Jetware causes skips for me
Click to expand...
Click to collapse
Do this and it will work just fine -
1. Install JET ware.
2. Start the utility, go to advanced options and check all relevant ones
3. On the main screen, click on "Turn on bluetooth". If it is already Checked, uncheck it and then re-check the option
4. Soft reset (Use PSShutXp or something which does a software reset. do not use the hardware reset button)
5. After restarting, make sure you freshly pair up your headset (Delete the previous partnership on your uni, and also do a factory reset on your headset)
6. Once paired, it should work just fine.
let me know if it works...also make sure you use the latest version (v1.31 i guess)
-San
Import this reg file...
Hi,
Import this .reg file, and it should work fine ;-)
San
dreamtheater39 said:
Hi,
Import this .reg file, and it should work fine ;-)
San
Click to expand...
Click to collapse
will this fix work for a uni with wm5
R 1.09.00
G 42.42.p8
D 1.30.107.wwe
Also if someone could point me towards an explanation
of what these mean cause yes im a nab/nube
First of all: For about a year, the keyboard was working fine, using thinkoutside 4.52 official driver. Then I got a nice gift: logitech V470 BT laser mouse. Then the hell begun. How in the world connect it to the PDA?
Someone on this forum claimed that V470 works on HTC Athena out-of-the-box, using included in wm6/wm6.1 bluetooth hid stack. For some reason, after I pair the mouse and check input device in BT services list - nothing happens. I tried:
- uninstalling ThinkOutsde driver - the even keyboard stopped working, even thi I paired it and checked input device,
- bluemouse/ blueinput - it says BT on, mouse off. On their site I read it's probably due to incompatible BT stack. No chances of telling what BT stack is installed on PPC... :/
- using hacked version of stowaway keyboard/mouse driver. I got "keyboard not working / please reinstall stowawayxt.dll" error. I checked - hacked one has 162kB, the one from 4.52 - 59kB and is signed, while hacked one is not. WTF?
- I know, that stowaway disables built-in HID, but even when I'm enabling it again, nothing is happening.
- Deep search on google on v470, bluetooth hid, bluetooth at all on PDAs, bt stacks and such revealed nothing. Please, help!
http://monety.piloty.eu/monety2000.html
Hard: HTC Artemis
ROM: Wm6.1 Vanilla/WWE 4.01
Hello Vartharian, did you ever have any luck getting the Bluetooth mouse to work? I too am trying to find a solution, but I lack the hacked thinkoutside files to work from.
If you have one I can take a look and see if I can reverse engineer a fix.
Thanks,
Peter
pdamouse said:
Hello Vartharian, did you ever have any luck getting the Bluetooth mouse to work? I too am trying to find a solution, but I lack the hacked thinkoutside files to work from.
If you have one I can take a look and see if I can reverse engineer a fix.
Thanks,
Peter
Click to expand...
Click to collapse
Some kind of BlueTek (or something) drivers for WinMo to enable BT mouse use. Found them in some download somewhere in the tubes, look for "BlueMouse driver" or something. Installs driver and settings panel. Hope this helps. Maybe then you could get some sweet Quake action going.
Hi all, I can’t seem to find a straight answer on this forum about how to connect my SX66 (WM6.1) to my Windows XP PC over Bluetooth so I can listen to my mp3s or internet radio on my HIFI system that’s connected to my PC?
I am using a Bluetooth USB stick and I have them both paired using the BT software the came with Windows XP.
I had tried BlueSoleil software in the past to listen to my music but I didn’t find it practical because it keeps disconnecting and I would need to pair them again.
I am running ROM version: 6.141 WWE, RADIO version: 1.02.10 and ExtROM version: BLACK KERNEL
Thanks
first of all let's make sure i got the question right:
you want to stream audio from your sx66 to your pc, right?
well that is no problem in general, since the sx66 is known to have better BT quality than most of the other BA models (further range, higher tx rate).
since windows xp does not come with a proper usable bluetooth client (unlike vista) i woul generally recommend bluesoleil, because it can be a handy tool, once you got all the settings right. plus you don't need extra drivers, since most of the BT chip manufacturers work with bluesoleil.
then all you have to do is pair your device with your pc and once that's done, set bluesoleil to allow the device to do all further things in all areas without further confirmation.
then you need to make sure you have the a2dpfix on your sx66, which is needed for stereo bt stream.
then, when paired, start wmp and play music, and look in the mixer on your pc, if a signal comes in, and what channel and turn it up / activate it for audio input.
(let me repeat that all this is so much easier in vista, and for every step i made the other day i have to think of 5 ones which are necessary to do the same on xp)
then your stream should work as long as you don't close wmp, if you do so and then want to continue playing, you need to connect to your pc in your BA's bluetooth app again, but need no settings on the px anymore which i guess is a relief.
back to the basics: if you really want to do that, you can do it now, but still i can't think of a reason why anyone should do that, i suppose the mp3s your playing come from your pc and you could play them there anyway, your pc can probably also play internet radio.
if that is a "i turn the screen off and control the music with my mobile!" thing, i can give you another freeware, with which you can control winamp, whenever you are connected via activesync, no matter if you are doing that via cable, cradle, BT or wi-fi.
i just gotta look it up, i don't have it right now either but it is great!
e.g. i want to control my music while playing, but with full screen games and without media keys on the pc's keyboard i need an external winamp control to (plus it also provides jump to and other things media keyboards can't do).
EDIT: i could not find the program i had to control winamp from my device, but it was a bit older, even worked with wm2003se, but i did find, that people do like to control their pc players from mobiles, therefore, a thread was made, to be found here: http://forum.xda-developers.com/showthread.php?t=294524
greetings Chef_Tony
P.S. please re-post, if it worked and if that is what you actually asked.
Thanks
Thank you for the quick reply; Yes you understood correctly.
It seems that BlueSoleil is the only solution for what I want to do, so I reinstalled (version: 6.4.245.0) again with the A2DPFix.CAB and it’s working for now.
Do you know where I can find a cab file to install on my BA to enable the rest of BlueSoleil services (Bluetooth phonebook….)? BlueSoleil is asking me to install “symbian\IVT-wm(1.0.2).CAB” on my device, but it doesn’t work and the only file I can find on this forum is the “bluesoleil_r2.arm_163.zip” for magician.
actually, for other services, like dialing, phoebook, sms and stuff i would suggest pairig the device, and setting up activesync via bluetooth, your phonebook is to be found in outlook then and for writing sms and completely controlling your device i would suggest MyMobiler, which is a freeware remote program which gets the BA's screen on the pc and you can control the device via the pc's keyboard and mouse. i also use that for making screenshots of new roms and stuff, it's free and works with activesync, so cradled, BT, wi-fi doesn't matter. that of course, doesn't 100% satisfy your question, i guess. i'm in a bit of a hurry right now, but be sure to check in this thread later, because i will edit, as soon as i found something that really brings you the services.
Thanks for the info. MyMobiler works great
By the way I uninstalled the A2DPFix because the sound was choppy.
Good evening,
Well MyMobiler is not working everytime on my device and i'd appreciate to find bluesoleil CE if it allows you to send sms from PC without having to link it anytime.
Have a nice evening.
Hi,
I am looking for a way to stream audio from the Touch HD to my Car. Unfortunately the cars built-in audio system doesn't support bluetooth. But there is that handsfree-thing, which works really great with calls. So I wondered, if there is a software solution that streams my music from the phone as "incoming call" to my car?
I've tried "acbToggleBT" and "BTASP" and both didn't work in the Car, but they did work with a bluetooth headset.
It would be really great if somebody knows, finds, posts, programs or has an solution.
Thanks in advance!
Greets from Bavaria, Germany
berkley
I can't remember but there was an option to route normal audio to the bluetooth handset in my HP iPAQ which is missing from HD.
Believe me music streaming to HSF device will be as good as listening to AM radio on poor reception. Go get a bluetooth A2DP profile audio headunit like Sony - MEX-BT2500 (this is the one I use and works like a charm).
Thanks for your reply.
Perhaps I took the wrong words to explain what I am looking for.
The thing I want is a piece of software that "imitates" an incoming call and sends the audio from S2P to the handsfree of my car.
Maybe this explanation is a bit better...?
[edit]
have you tried BT Audio
it's a paid app
acbToggleBT always worked for me
try this
There are 3 apps
btaudio on
btaudio off
bttoogle (on/off)
i made a cab file for it
camro said:
try this
There are 3 apps
btaudio on
btaudio off
bttoogle (on/off)
i made a cab file for it
Click to expand...
Click to collapse
Excellent. I can get this to work via bluetooth headset.
Unfortunatley this didn't work in my car (which is what I believe the OP wants).
http://220.232.214.116:8088/attachmentes/Day_071224/31_270270_b7dcc_pxdxa.btaudio.zip
I use this application, works terrific!!.......enjoy
ausi - does this work on a car stereo i.e. does it emulate an incoming phone call?
binning said:
ausi - does this work on a car stereo i.e. does it emulate an incoming phone call?
Click to expand...
Click to collapse
All i can say is this based on using it on my HD with WM 6.1 & 6.5 (Dutty ROM):
Once you install the program and then execute it (Press On):
It will transfer all Music & Audio from Movies (Core Player) etc. to my BT Nokia Headset or my BT Car Speakerphone (Motorola T305), i do not have a Radio BT set so i can't tell you, you'll just have to try.
This Cab solved my problem as the basic BT HD ROM sertting only transfers the Phone audio while this little cab transfers ALL audio, so i would presume that it may help you with your BT radio, you can always uninstall the cab if it doesn't work for you.
There is NO emulation invloved here!!??
Good luck!
Hi Ausi, tried on my Nokia BT car handsfree but no joy
The handsfree only accepts an incoming call as stated above so some sort of emulation may be needed. Would be happy if someone knew about something...
ausi said:
This Cab solved my problem as the basic BT HD ROM sertting only transfers the Phone audio while this little cab transfers ALL audio, so i would presume that it may help you with your BT radio, you can always uninstall the cab if it doesn't work for you.
There is NO emulation invloved here!!??
Good luck!
Click to expand...
Click to collapse
Funny... my HD does the reverse. I get de BT audio but on the BT phone I got nothing but static...
I've got a Sony Xplod bluetooth radio in my car.
When I start up it automatically connects to my HD, however it only connects as handsfree rather than both handsfree and BT stereo.
I have to go into comms manager and bluetooth settings, then select and hold on the xplod in the device list.
A menu comes up asking what I'd like to connect as, and I pick stereo, then repeat for handsfree.
Give that a go. Holding on the device to bring up the menu gives you the BT profiles the device is capable of, so with a bit of luck stereo/headphones will be an option for you.