Hi,
I am looking for a way to stream audio from the Touch HD to my Car. Unfortunately the cars built-in audio system doesn't support bluetooth. But there is that handsfree-thing, which works really great with calls. So I wondered, if there is a software solution that streams my music from the phone as "incoming call" to my car?
I've tried "acbToggleBT" and "BTASP" and both didn't work in the Car, but they did work with a bluetooth headset.
It would be really great if somebody knows, finds, posts, programs or has an solution.
Thanks in advance!
Greets from Bavaria, Germany
berkley
I can't remember but there was an option to route normal audio to the bluetooth handset in my HP iPAQ which is missing from HD.
Believe me music streaming to HSF device will be as good as listening to AM radio on poor reception. Go get a bluetooth A2DP profile audio headunit like Sony - MEX-BT2500 (this is the one I use and works like a charm).
Thanks for your reply.
Perhaps I took the wrong words to explain what I am looking for.
The thing I want is a piece of software that "imitates" an incoming call and sends the audio from S2P to the handsfree of my car.
Maybe this explanation is a bit better...?
[edit]
have you tried BT Audio
it's a paid app
acbToggleBT always worked for me
try this
There are 3 apps
btaudio on
btaudio off
bttoogle (on/off)
i made a cab file for it
camro said:
try this
There are 3 apps
btaudio on
btaudio off
bttoogle (on/off)
i made a cab file for it
Click to expand...
Click to collapse
Excellent. I can get this to work via bluetooth headset.
Unfortunatley this didn't work in my car (which is what I believe the OP wants).
http://220.232.214.116:8088/attachmentes/Day_071224/31_270270_b7dcc_pxdxa.btaudio.zip
I use this application, works terrific!!.......enjoy
ausi - does this work on a car stereo i.e. does it emulate an incoming phone call?
binning said:
ausi - does this work on a car stereo i.e. does it emulate an incoming phone call?
Click to expand...
Click to collapse
All i can say is this based on using it on my HD with WM 6.1 & 6.5 (Dutty ROM):
Once you install the program and then execute it (Press On):
It will transfer all Music & Audio from Movies (Core Player) etc. to my BT Nokia Headset or my BT Car Speakerphone (Motorola T305), i do not have a Radio BT set so i can't tell you, you'll just have to try.
This Cab solved my problem as the basic BT HD ROM sertting only transfers the Phone audio while this little cab transfers ALL audio, so i would presume that it may help you with your BT radio, you can always uninstall the cab if it doesn't work for you.
There is NO emulation invloved here!!??
Good luck!
Hi Ausi, tried on my Nokia BT car handsfree but no joy
The handsfree only accepts an incoming call as stated above so some sort of emulation may be needed. Would be happy if someone knew about something...
ausi said:
This Cab solved my problem as the basic BT HD ROM sertting only transfers the Phone audio while this little cab transfers ALL audio, so i would presume that it may help you with your BT radio, you can always uninstall the cab if it doesn't work for you.
There is NO emulation invloved here!!??
Good luck!
Click to expand...
Click to collapse
Funny... my HD does the reverse. I get de BT audio but on the BT phone I got nothing but static...
I've got a Sony Xplod bluetooth radio in my car.
When I start up it automatically connects to my HD, however it only connects as handsfree rather than both handsfree and BT stereo.
I have to go into comms manager and bluetooth settings, then select and hold on the xplod in the device list.
A menu comes up asking what I'd like to connect as, and I pick stereo, then repeat for handsfree.
Give that a go. Holding on the device to bring up the menu gives you the BT profiles the device is capable of, so with a bit of luck stereo/headphones will be an option for you.
Related
Greetings -- I've upgraded to BT 3900 for Motorola HS850 hands-free, which works, although with static.
Now, I got i-tech Clip, and it worked as a hands-free as well. But read on.
I wanted to try it as high-quality audio setup, so I got the profiles -- although for build 3500 -- off the ftp. It did show that profile, but quickly failed to dicover the service on i-tech. As I deleted the hands-free profile, I try to get at least that back. Alas! Now it doesn't connect to hands-free i-tech either.
I've tried: installing 3500, 160.600, -- still discovery fails. What's the rollback procedure to get 3900 with its profiles back?
Braver, I also have Clip S35 from i-Tech. It works so fine with my Xda II (Widcomm Stack + Handsfree Profile and A2DP)
Did you try to reset your Clip S35 and try to pair it together again?
How did you get the A2DP profile? I've installed the profiles for build 3500 from the ftp, it added high-quality audio (is it _the_ A2DP?). I had BT 3900 by then, then reinstalled various versions after i-tech could not be found the second time.
Is it OK to install the extra profiles for build 3500 with 3900?
And, when you do get an audio profile and a hands-free one, how you differentiate -- say, you listen to music and receive a call?
Sorry braver, I misunderstood ...
What I've is :-
1. O2 Xda II
2. O2 Xda II Mini
3. i-Tech BlueCON
4. i-Tech Clip S35
5. IBM X31 (My Laptop)
And I played with them like this:-
(O2 Xda II Mini + IBM X31 + i-Tech BlueCON + i-Tech Clip S35)
I pair my Mini with Clip S35 with the Handsfree Profile. I also connect my BlueCON to my X31 (plug the audio jack of BlueCON to the audio output jack of X31) and pair my Clip S35 with BlueCON.
When I listen the music from my X31. My X31 send the audio output to BlueCON and BlueCON stream the audio data to Clip S35. So I can hear the music.
And when I have the incoming call on my Mini. My Mini connect to my Clip S35 so my Clip S35 stop the music from BlueCON and go to Handsfree Profile Mode. After the hang up the phone line, Clip S35 start the music again automatically.
==================================
For BA, I've seen from the forum but it's Thai language:-
http://www.pdamobiz.com/show_news.asp?NewsID=41062&PN=1
They said that they installed PDA2K_BroadcomCorp_BTUpdate.cab from xda-developers.com like you did and every was so fine.
Please try to check and let me know if there's what I can help.
(Also, don't forget, PIN for Clip S35 is 8888. It's not 0000)
I.tech S35 paired with WM2003 SE with Widcomm 1.6.0600
Guys, help.
I have a WM2003 SE unit with Widcomm 1.6.0600 stack and I just acquired an I-tech S35. I have the following things working:
1. Mp3 over bluetooth using Windows Media Player 9 and the high quality stereo profile.
2. Headset connection for outgoing calls.
I have the following problems:
1. with the mp3, I get interference or what I assume is interference. if I move around too much, the sound becomes choppy.
2. with the headset, I can't receive incoming call. when the call comes in, it doesn't get directed to my S35 even when it's linked via headset mode. I have to answer the phone directly from my XDA2. I tried linking the S35 with a Nokia 6600 and the incoming call is redirected perfectly well into the S35.
3. I can't get the S35 to work in "buzzer" mode, even when I pair it with a Nokia 6600.
4. I've tried calling out and the person I call always says that my call is very unclear.
Does anyone else have problems like this or has been able to resolve these problems? I could use the help or I'd be forced to sell this unit since it's practically useless to me with particularly with the second problem.
Thanks and best regards...
Winston
Hi wsabido168,
1. with the mp3, I get interference or what I assume is interference. if I move around too much, the sound becomes choppy.
Ave*: I don't think that I have the interference problem but the sound is not come out smoothly. I hear the noise like you cooking the pop corn around every 15 seconds per time. You should try to contact to the shop that you bought it and ask them to try with another one.
2. with the headset, I can't receive incoming call. when the call comes in, it doesn't get directed to my S35 even when it's linked via headset mode. I have to answer the phone directly from my XDA2. I tried linking the S35 with a Nokia 6600 and the incoming call is redirected perfectly well into the S35.
Ave*: Mine is not. I can receive the incoming call from S35. I feel like there's something wrong with your XDA II.
3. I can't get the S35 to work in "buzzer" mode, even when I pair it with a Nokia 6600.
Ave*: You can turn it on and off. Please check from the manual. It said that you need to press the button (I can't remember which one) to on and off the buzzer mode. (This problem may relate with your 2nd question, I just guest)
4. I've tried calling out and the person I call always says that my call is very unclear.
Ave*: This question may relate with the 1st question. Mine is clearly (I asked from the other side)
Hi Ave, first of all, thanks for the information.
May I ask what software you have on your system? for example, what bluetooth stack you're using and what version of the OS? Maybe I can reflash my OS to whatever you're using to get it to work properly.
Thanks and best regards...
wsabido168, you're welcome ... I've 2 of XDA.
The first on is my XDA II:-
ROM: 2.06.00 WWE
RADIO: 1.18.00
ExtROM: - (Big Storage)
Bluetooth Stack: Widcomm Bluetooth Stack 1.5.0.2000
The secound one is my XDA II Mini:-
ROM: 1.12.00 WWE
RADIO: 1.13.00
ExtROM: 1.12.119 WWE
Bluetooth Stack: Microsoft Bluetooth Stack
questions:
1. with the XDAII running Bluetooth Stack 1.5.0.2000, where'd you get the Bluetooth Stack 1.5.0.2000? how do I download and from where it?
2. when you're using Bluetooth Stack 1.5.0.2000, can your XDAII receive calls and automatically redirect it to your i-tech S35 even when you're playing mp3s?
3. with Bluetooth Stack 1.5.0.2000, do you have the profile for "high quality audio" with which to use the mp3s over bluetooth?
Thanks and best regards...
Winston
Answer 1
Read from here:
http://forum.xda-developers.com/viewtopic.php?t=17186&highlight=bluetooth+headset+high+quality
Widcomm 1.5.0.2000 File:
http://forum.xda-developers.com/download.php?id=2379
Registry File:
http://forum.xda-developers.com/download.php?id=2378
See here for the picture:
http://www.pdamobiz.com/forum/forum_posts.asp?TID=39555&PN=1&TPN=1
Answer 2
I think the answer is No,
XDA II has the Microsoft Bluetooth Stack installed from the manufacturing. It has Headset Profile but no A2DP (High Quality Audio) available. But if you want to have A2DP on XDA II, you need to install the Widcomm Bluetooth Stack.
The stack from Widcomm has A2DP and can be run on XDA II (but not work on XDA II Mini)
After you install the stack from Widcomm, you'll be able to listen MP3 using Clip S35, but if you want to use your Clip S35 to answer a call, you have to stop the Widcomm Stack and start the Microsoft Stack instead.
Microsoft Stack and Widcomm Stack can be run on XDA II but not the same time.
Answer 3
Yes, Widcomm 1.5.0.2000 has A2DP See Answer 1 for more detail.
Will it work on WM5?
I haven't try it yet but I don't think that it will work on WM5. I'm not so sure, still need someone in this forum to answer for us.
Do you know?, i-Tech has a A2DP software for Symbian OS. It's BluePlayer which I used to try on Nokia 6600. It's really cool because you will be able to listen to the music with high quality audio, also you can answer the phone call with this Clip S35 too.
I used to contact to them to asked for the A2DP software for my Magician. But the answer was they didn't have a plan to do it yet.
Has anyone managed to get Widcomm A2DP working with the headset profile?
wamatt said:
Has anyone managed to get Widcomm A2DP working with the headset profile?
Click to expand...
Click to collapse
On WM2003SE or WM5? With the former, I've used the A2DP profile with Zonet ZUB8100 stereo BT headphones to listen to MP3s. Works pretty well; no static until I get 5-10 meters from the SX66.
Haven't installed WM5 yet, and I don't intend to in the near future.
Hey guys,
Thanks to all the information from you guys, I have gotten it to work (A2DP and bluetooth with my S-35 headset and XDAII (installed with WM2003SE) but still have a problem with the fact that the Broadcom does NOT permit received calls to be redirected to the headset therefore giving it less functionality than if I were using a Nokia cellphone with this headset.
If anyone has a fix to this problem, please let me know.
Thanks and best regards...
Winston
Winston, I took a long time to search on the internet but nobody could give me the information to fix it.
Somebody said that the problem of Headset Profile from Widcomm Bluetooth Stack and Xda II is about the Audio Gateway and Wave Driver. The Wavedev.dll didn't redirect the audio output to Handfree Profile of Widcomm Bluetooth Stack. This is all that I know about.
Anyway, nice to talk to you. Feel free to let me know if there's somethings that I can help or what we can share.
Ave*
ok. thanks again Ave.
3waygeek said:
wamatt said:
Has anyone managed to get Widcomm A2DP working with the headset profile?
Click to expand...
Click to collapse
On WM2003SE or WM5? With the former, I've used the A2DP profile with Zonet ZUB8100 stereo BT headphones to listen to MP3s. Works pretty well; no static until I get 5-10 meters from the SX66.
Haven't installed WM5 yet, and I don't intend to in the near future.
Click to expand...
Click to collapse
I'm on WM2003 Rom 1.40 with WMP10. I can get A2DP working as well, however headset doesnt work properly then (IE can't take calls on the headphones).
Also another annoying problem is that WMP10 turns off after 5 minutes (ie screen goes blank), this interrupts the A2DP session, and I have to reconnect.
Having installed TOMTOM6 on my HTC-3300 (t-Mob branded) I am looking for a way to route TOMTOM traffic messages thru my bluetooth carkit.
Obviously the phone calls go through fine, but afaik all the pda apps. sounds only run thru the mda's speaker.
Does anyone know a workaround or reg. tweak to do this?, I can't immagine I am the only one who would be looking for such functionality.....unless everybody else uses the gps function only 4 walking
Help much appreciated,
Frans
If your car kit supports the A2DP profile for Audio over Bluetooth and you select the option to use it all the audio from TomTom will be via the car kit, check what your car kit is capable of supporting - Mike
vriesfde said:
Having installed TOMTOM6 on my HTC-3300 (t-Mob branded) I am looking for a way to route TOMTOM traffic messages thru my bluetooth carkit.
Obviously the phone calls go through fine, but afaik all the pda apps. sounds only run thru the mda's speaker.
Does anyone know a workaround or reg. tweak to do this?, I can't immagine I am the only one who would be looking for such functionality.....unless everybody else uses the gps function only 4 walking
Help much appreciated,
Frans
Click to expand...
Click to collapse
I'm using btaudio
greetz
Thanks for the tips!
My Nokia carkit does not support A2DP, it's the old CK-7W type....
I will try the above attached btaudio once more. Previous attempts using this program were not succesful, I believe the bt hardware of the artemis was not recognized.
I remember that on my IPAQ 5550 I changed a registry setting, enabling audio over BT, but I could not find such an entry in the Artemis reg.
Keep you posted on progress, and thanks sofar!
Succes!
Just tried btaudio, attached by hotatomic, and it works!!!!
Haven't tried what happens if I get an incoming call yet, but the sound for TT6 is much better using the Nokia handsfree.
Thanks!!!
Hi guys,
I'm a newbie here, and was pointed to your excellent forum from one of the Mods over at pocketgpsworld.com.
I am running copilot 6 on an O2-registered xda Orbit, using a scala rider headset, on my motorbike, and i need to install btaudio.cab to mt xda in order for the insturctions to be relayed to my earpiece. My question is this - whereabouts to do i need to upload the file to on my xda (obviously somewhere in the copilot files, but i'm not sure where!!) and do i need to unpack it first?
Any help or tips gratefully recieved!!
Welsh Biker
No transfer the cab file directly to the orbit, (storage card is usually the best place to put them).
Then in file explorer, double click the .cab file to run it and it will install the application.
It's a separate application to Copilot.
vriesfde said:
Just tried btaudio, attached by hotatomic, and it works!!!!
Haven't tried what happens if I get an incoming call yet, but the sound for TT6 is much better using the Nokia handsfree.
Thanks!!!
Click to expand...
Click to collapse
Graag gedaan
Your welcome and when a call comes in it work ok
Gajet said:
No transfer the cab file directly to the orbit, (storage card is usually the best place to put them).
Then in file explorer, double click the .cab file to run it and it will install the application.
It's a separate application to Copilot.
Click to expand...
Click to collapse
That's brilliant, many thanks. I did as you said, and it is now working perfectly.
Once again, many thanks indeed
Welsh Biker
i have a orbit and i installed the btaudio cab but unfortunately it doesnt work for me. do i need to change any other setting for it to work properly? i am using a motorola hs350 headset. i am trying to use it to listen to music on my headset instead of the internal speaker. i tested tomtom6 with it and that is still being heard on the speaker and not the headset. thanks
Connect the headset to the Artemis first, then run BTAudio, switch to "on" and then minimize don't exit the program.
Have you got software that closes apps by pressing the x button or something, so that you keep switching the app off when activating tomtom etc.
how silly of me, checked settings menu, connections menu everything except the program menu!!!
Thanks a lot mate
Hi,
I seem to be having the same problem as some of the other guys. The Bt software is installed on my Orbit, I pair the phone with my car then switch the software on. At this stage the TomTom voice stops coming from the phone but doesn't come through the handfree either. If I switch the software off again the sound returns to the phone.
Is this being caused by the format of the handfree kit in my car as mentioned on the first page of this post?? How would I positively confirm the format of my handsfree kit?
Cheers
Rob.
i try to install and it works, but when i turn on audio my radio goes in mute, is possible to send the sound only when tomtom talk?
Hi all
I also need help with audio features. Is there an app that will send all audio through the head phone socket (connected to autocom on motorbike) and phone calls through bluetooth have tryed the app in this tread but it wont split it only redirects all audio?
PS sorry for the high jack of your thread just seemed a good place to ask this.
I had with wm5 a tool (i dont know how its called anymore) The tool routes all audio from the hermes to the bluetooth handsfree kit.
Now with wm6 (shadow) i cant get it to work anymore...
What i want is to have all the audio (Tomtom navigator, ringtone, sms tone) through bluetooth to the carkit.
i did installed a shareware apps... calles blueconnect but it always send a signal to my carkit it mutes my radio all the time!
Can someone help me please? I have already search the forum... but i cant get it to work...
yea it was a bluetooth mono through cab ..with a toggle to on or off..im looking for it also.
http://forum.xda-developers.com/showthread.php?t=266722
Searching is FUN!!!
not when ur blind
Doesnt work wel!!
I can select audio2blue then my car radio stops playing because the phone is putting a hish over the line. But worse audio from tomtom still coming over the phone speaker!
Anyone a solution!
I have the O2 Orbit with Co-Pilot software that came with it. I connect the Orbit via bluetooth to the intercom system on my motorcycle. The phone connects automatically every time and I can receive calls as I ride, and listen to WMP (though I prefer to use my ipod).
I set the Co-pilot running the other day but none of the commands would come through the bluetooth connection into my helmet. Do I have a setting wrong or will this not work?
Thanks in advance.
You want btaudio installed to the unit IIRC, have a read of this thread where there is also a download for the plug in to enable the nav voices out through the headset - Mike
http://forum.xda-developers.com/showthread.php?t=306642&highlight=audio
mikealder said:
You want btaudio installed to the unit IIRC, have a read of this thread where there is also a download for the plug in to enable the nav voices out through the headset - Mike
http://forum.xda-developers.com/showthread.php?t=306642&highlight=audio
Click to expand...
Click to collapse
Thanks mike.
I have installed it but it doesn't seem to route the audio through the bt to my helmet, but I'll try again later. Do I need to activate btaudio every time I want to use it or will it run automatically?
I couldn't find the 'plug' you mentioned above...
you need to turn the app on if you go to the bluetooth menu and while the helmet is turned on touch and hold the helmet bluetooth name and select set as bt audio if this is not present the use mikes method it all depends on wheather the helmets bluetooth is compatable with the artimis
Garneth said:
Thanks mike.
I have installed it but it doesn't seem to route the audio through the bt to my helmet, but I'll try again later. Do I need to activate btaudio every time I want to use it or will it run automatically?
I couldn't find the 'plug' you mentioned above...
Click to expand...
Click to collapse
Two ways to do this - get a bluetooth headset that supports A2DP streaming ( I have a Sony DR-BT30Q) then all audio comes through the headset.
Alternatively, use VJvolubilis (http://www.vijay555.com/?Releases:VJVolubilis) - you'll need to set up a shortcut to run it with -agon to stream all audio through your bluetooth device. It worked for me on a BMW car kit!
Thanks guys.
Alix, I'll try that when I get home. The b/t must be compatible as I can receive phone calls on the bike and listen to WMP.
TT, I have no choice but to keep the headset I have as it is part of the wired intercom system and is fitted into my helmet. The b/t connectivity comes through a dongle supplied by the intercom manufacturer and sits beneath the seat with the intercom controller. It works fine with some apps, but just not Co-Pilot.
Not sure what this means :
TangerineTractor said:
...you'll need to set up a shortcut to run it with -agon to stream all audio through your bluetooth device.
Click to expand...
Click to collapse
Thanks again.
Has anybody managed to successfully re-direct their Trinity BT audio to a non A2DP handsfree kit?
I have tried a couple of the cab's and registry hacks in other parts of the forum with no success.
Bluetooth handsfree works fine, for phone calls.
Main thing i want to do is got my voice command to use my handsfree mic, and not my phone mic....
Be nice to re-direct tomtom too, but that would just be a bonus really.
A2DP Hack
Just got this hack form my friend. & test it's OK on my Trinity... But, it's a bit tricky that only work in .mp3 format. .mwa same.
Ok, that did nothing for my phone.
Do you need to assign the application a button or something?