I think I bricked the poor thing. I tried to flash my rooted EVO back to factory, and it stopped half way. And I tried again because it was stuck at a HTC logo on the screen, which it completed 100%.
Now when I boot up, it goes straight to Fastboot, I can't get anywhere, I go to the Bootloader, and click recovery, it shows me the red triangle. Now trying to factory reset and get something back up and running.
Can anyone tell me if there is a way to fix this?
It sounds like you're plugged in and your phone sees your device. Can you run a ruu on your PC in a way that will install it?
Sorry, a bit over my head, but I really doubt you're bricked (I know you're not bricked), if your PC can still see your phone. Someone sager than I will be able to help.
Sent from my PC36100 using XDA App
Related
Hey guys, I tried to perma root my wife's G2 last night using Visionary+ r14 but when it tried to reboot it doesn't get past the green and white "HTC" screen, so now I have a couple of questions.
I bought this phone from someone off of Craigslist and it was working great until I tried to root it so it is technically out of warranty do you think I can get it replaced since everything is still stock?
Also I tried to apply the HTC OTA update to fix it and I still have the problem, is there anything I can do to repair this phone? Thanks in advance guys and mahalo!
Okay pull your battery out and put it back in..after dat press power button and volume down button until you get to the recovery screen and do a factory reset..
Sent from my HTC Vision using XDA App
Thanks for the reply jboiii15. I did a factory reset before I flashed the OTA update and I have factory reset several times but still no go. I appreciate you taking the time to help me out.
Did you try this? http://forum.xda-developers.com/showthread.php?t=842495
aznsnake666 said:
Did you try this? http://forum.xda-developers.com/showthread.php?t=842495
Click to expand...
Click to collapse
I haven't tried it because I can't get ADB to work with the phone the way it is, Fastboot works but ADB just shows nothing there while I'm in recovery or the boot screen. Thank you also for the reply. My wife is pissed lol.
Try to extract the ROM from the official RUU and rename it to PC10IMG.zip. Put this on the root of your SD card and boot into bootloader and leave it to work. This should solve your problem Fingers Crossed
JD
do you have s-off??
I don't have S-OFF as I just started the rooting procedure when it decided to take a dump on me, after this I don't think my wife will want me to root any more of her phones although I know she'll miss it after having a rooted G1 running CM and a rooted Slide running Chromatic. Good thing I didn't sell her Slide yet lol.
I'll try to find information on the PC10IMG.zip method now and see what can be done.
Thank you guys for all the help, I really appreciate it all.
itsmekeoni said:
I don't have S-OFF as I just started the rooting procedure when it decided to take a dump on me, after this I don't think my wife will want me to root any more of her phones although I know she'll miss it after having a rooted G1 running CM and a rooted Slide running Chromatic. Good thing I didn't sell her Slide yet lol.
I'll try to find information on the PC10IMG.zip method now and see what can be done.
Thank you guys for all the help, I really appreciate it all.
Click to expand...
Click to collapse
I think the rooting process has corrupted your kernel or rom, it is rare to get a brick from just the visionary process, but i know there has at least been one that this has happened to.
Report back to tell us if the extracted ROM worked for you, there is still hope;')
JD
Oh man this is just getting worse lol. I had the phone sitting here plugged into my laptop while the phone was in the Hboot screen where you can select Fastboot, Recovery and so on. All of a sudden my here Windows give off the noise as if something was connected or disconnected from my computer and I see the screen shut off on the G2 with a red light blinking. Now the phone doesn't power on and the red light blinks while the phone is plugged into the computer but doesn't power on.
As I was typing this the red light came on solid as if it is charging now, maybe it doesn't charge while in that screen and the battery just died I dunno, strange.
JupiterDroid said:
I think the rooting process has corrupted your kernel or rom, it is rare to get a brick from just the visionary process, but i know there has at least been one that this has happened to.
Report back to tell us if the extracted ROM worked for you, there is still hope;')
JD
Click to expand...
Click to collapse
Well I called T-Mobile and they are sending out a new phone, I'm unsure if I should still mess with it or not. I did flash the TMOUSA OTA update and that didn't help, I didn't unpack it to see if it contained a new Kernel but I'm sure it had a new system.img, still think it is one of those that is messed up?
I'm having a hard time finding the things to get the PC10IMG.zip going, work is calling me in different directions and my A.D.D is kicking in lol.
try this http://forum.xda-developers.com/showthread.php?t=855764 i had the same problem like you, steviewevie told me to do it, if you have problem to connect your g2 with sdk download pda net, it works for me and now i have my g2 back with the new root... just do what it said on that link believe me works...
P.D. I am a androidnoober always have a iphone and this was my first time using sdk adb or whatever name is and I did it
Thanks AndroidNoober, I've seen that link in my search for an answer to my problem. One of the issues that is making this harder is that after the phone "bricked" it lost ADB connectivity. I've tried it on two computers that have a properly working ADB (I test it with my N1 and 3G Slide) and it used to work with the G2 but now I can't get it to see the phone, I've heard Recovery has ADB blocked.
semi bricked attempting permaroot
i attempted permaroot and semi bricked my phone. will not boot past htc screen. i can't get adb to work. i am trying to get pdanet installed but it keeps getting stuck on installing on phone. can it install while phone is in recovery mode? i have had no sucess trying to figure this out on my own and phone is not covered with a warranty
i have gotten the phone to read an update.zip file.
it is reading the pc10img.zip as well.
now i just have to get past the htc screen.
i do have s-on as i had just started the process.
any help would be appreciated
Hello, I wanted to ask if anyone knows how to resolve a SEMI-BRICK. There is no way to enter recovery mode or fastboot.
Was installing a ROM when I got an error and never could turn on the phone. Only I get the screen with the mobile and pc with an exclamation mark in the middle.
Appreciate your help.
PS: sorry for my English
Javier
If you can't get to download mode you might be screwed. Can you get into download mode? If you can then you can just use odin or fastboot to push the factory rom to the phone and it will work again. Obviously you lose root but you can re-root afterwards. Good luck.
I find no way to enter download mode. in any way that I only try to turn the screen appears to indicate in the query.
There is no way to fix it?
thanks
Hey, in all the time on here I have never heard of a bricked Nexus.
Ok so just to be sure when the phone is off and you hold volume down and the power button it does nothing? Sorry just want to be sure this is the case...
probe all possible combinations and all leading me to the same, the screen with the exclamation mark. and on volume +, volume - and power and volume + and - and on
Ah no dude. That sounds bad. I might be wrong but you may need to go back to your provider and tell them it just switched off and wont work anymore.
Do you see the Google logo and the lock symbol when you turn it on or just this exclamation mark?
Obviously if you go back to your provider don't mention anything about roms or rooting as that voids your warranty but if they can't see the Google logo with the lock then they wont know you were rooting and romming it.
That would drive me crazy so I hope you get sorted soon.
The issue is that here in Argentina is not this phone. I bought online and sent me the U.S.. I have therefore not who wear it.
have you tried the usb jigs? i tried it on my nexus and it boots it into download mode
IINexusII said:
have you tried the usb jigs? i tried it on my nexus and it boots it into download mode
Click to expand...
Click to collapse
That might be worth a shot!
That I'll see if I can prove it today night. It is the only hope left for me.
Yeah, good luck man.
Well folks, with all the pain of the soul I confirm that I have is a full-BRICK. Last night at the JIG probe, and the only thing it does is turn on the phone and see the same screen BRICK. Since I can not think what else to do, only use it as a paperweight as they say
Any chance you try leaving battery out for a while, give it at least a good 10 minutes
Neither. I've left it up all night without battery and nothing.
javiiperez said:
Neither. I've left it up all night without battery and nothing.
Click to expand...
Click to collapse
Bad news Javii! So what are you going to do next?
Today I will try to recognize me either linux, so maybe you can do a fastboot to install the original rom. Because I said if you see the exclamation point is because it is a semi-brick
I used to get that screen with my Galaxy Tab when flashing the wrong ROM.
If the ODIN and original files are available for you to use, just use that and it should fix your phone.
Hi. I am a newbie on the forum so pardon me if I have posted in the wrong section.
I have a Samsung Galaxy Nexus i9250 that I purchased under a 3 year agreement with Bell not too long ago, perhaps in May. One day I left my phone connected to my PC so I could transfer some video and picture files that were on there. After the transfer finished, I then proceeded to remove my Nexus from my PC. After a while, I noticed it restarted because the screen went blank and I heard it vibrate because it was on my desk.
My phone is encrypted, so when the phone restarts, or you turn the phone off, and on again, you need to enter a PIN to decrypt the storage. When I entered the PIN, the Nexus froze and then restarted, leading me to the exact same screen I was at previously. Now, I attempted to enter the boot-loader and go into recovery mode, but each time I went into recovery mode, the phone restarted normally. There were a few times I would see the android guy with what looks like a globe sticking out of his chest and a bar below him which probably meant recovery, but my screen would flash back and forth and eventually stick.
I took the phone in only to be told that the system image in the Nexus is corrupted and that it wouldn't be covered under the warranty. At that same time, I decided to go back home and see if I could work with anything. I attempted to use ODIN to put ICS 4.0.4 back on the Nexus, but in between the process, ODIN failed, and now I am left with a phone that can not turn on, go into recovery, or anything else it should.
I'm at a loss here and I'm wondering if anyone else would have any suggestions at this point. If I have to send it in, I'm okay with that, but if there is something that can be done from my PC, I would like to attempt that first. Thank you for your help.
Does anyone think they may have a solution?
Give this a try if it is truly bricked. Apparently it works wonders though I'm not sure if it will work in your case.
Unlawful said:
Give this a try if it is truly bricked. Apparently it works wonders though I'm not sure if it will work in your case.
Click to expand...
Click to collapse
Thank you so much for your help. By using that program, I was able to boot back into ODIN mode and upload ICS 4.0.4 back on it!
Eazy_Going said:
Thank you so much for your help. By using that program, I was able to boot back into ODIN mode and upload ICS 4.0.4 back on it!
Click to expand...
Click to collapse
Woot, gotta love happy endings!
I've done my fair share of searching and I couldn't come up with much so I strongly believe I have a unique problem. I hope someone can point me in the right direction
Im have a rooted GS3 747 running Paranoid Android. A couple days ago the phone wouldn't charge. I tried different cables and batteries and after some testing with other GS3's I realized that my phone's charging port was broken. As a result I couldn't even connect my phone to the computer to unroot it with odin. I want to unroot so I can send in the phone for repair under warranty. So I downloaded mobile odin pro and proceeded to unroot my phone. I copied the original rogers rom to the external sd, followed the instructions and started the process. Everything looked like it was going fine until I got stuck on the samsung screen. Did some more research and learned that I had to do a factory data restart by booting into recovery mode. Did that. By now I'm feeling pretty good about all this. I followed the instructions all the way and I'm thinking that I'm gonna get a stock phone shortly. Wrong! The phone was still stuck on the samsung screen.
Now since I cant connect my phone to the PC cuz the charging port is broken I dont know what to do. I would have just flashed Clockwork Mod like I did when I first rooted and started all over but I cant.
If no one has a solution then Im just thinking of sending it in as is. Maybe they wont be able to see that the phone is rooted since they wont be able to connect it their PC without swapping out the motherboard to fix the problem.
I should add that I went to a repair store to try and fix it and they told me that the only way would be swap out your mobo.
machdown said:
I've done my fair share of searching and I couldn't come up with much so I strongly believe I have a unique problem. I hope someone can point me in the right direction
Im have a rooted GS3 747 running Paranoid Android. A couple days ago the phone wouldn't charge. I tried different cables and batteries and after some testing with other GS3's I realized that my phone's charging port was broken. As a result I couldn't even connect my phone to the computer to unroot it with odin. I want to unroot so I can send in the phone for repair under warranty. So I downloaded mobile odin pro and proceeded to unroot my phone. I copied the original rogers rom to the external sd, followed the instructions and started the process. Everything looked like it was going fine until I got stuck on the samsung screen. Did some more research and learned that I had to do a factory data restart by booting into recovery mode. Did that. By now I'm feeling pretty good about all this. I followed the instructions all the way and I'm thinking that I'm gonna get a stock phone shortly. Wrong! The phone was still stuck on the samsung screen.
Now since I cant connect my phone to the PC cuz the charging port is broken I dont know what to do. I would have just flashed Clockwork Mod like I did when I first rooted and started all over but I cant.
If no one has a solution then Im just thinking of sending it in as is. Maybe they wont be able to see that the phone is rooted since they wont be able to connect it their PC without swapping out the motherboard to fix the problem.
I should add that I went to a repair store to try and fix it and they told me that the only way would be swap out your mobo.
Click to expand...
Click to collapse
You will want to be sure that your flash counter says 0. This can be found by entering download mode (vol down, home, power) and you will see "custom binary count". that is how they will tell that you have rooted. Have you entered recovery and done a factory reset to get past the boot screen? If you can full wipe/ factory reset and get back into Android, I recommend you use "triangle away" app to clear your flash counter.
BCSC said:
You will want to be sure that your flash counter says 0. This can be found by entering download mode (vol down, home, power) and you will see "custom binary count". that is how they will tell that you have rooted. Have you entered recovery and done a factory reset to get past the boot screen? If you can full wipe/ factory reset and get back into Android, I recommend you use "triangle away" app to clear your flash counter.
Click to expand...
Click to collapse
I entered download mode and dont see flash counter anywhere. I got the warning screen were you have the option to restart or download.
Ya I entered recovery and did a factory reset but nothing. Really cant do anything with charging port broken.
I sent it in anyways for repairs. Hopefully they just replace it
I'm having the same problem with my Gs3 with CM10 4.2.2 running. Thought this would help.
Sent from my SPH-L710 using xda app-developers app
Hello all, so yesterday I went on my tablet (Nexus 7 2013 WIFI ver.) and browsed the net a bit and went to sleep. I recall having around 30% battery power. This morning I wake up to an apparently flat battery (power button didn't turn on anything) so I just plugged it in and did something else. After a while, I took my tablet and started it with the power button. However, it got stuck on the Google logo and never fired up anything. I've rooted the tablet quite some time ago (months) so the cause is not from there.
Things I haven't recently done:
Installing an app.
Rooting or flashing anything.
Updating an app.
Things I have tried doing to fix the problem:
Booting into FASTBOOT then trying the recovery mode = still stuck on the Google logo.
Booting a custom recovery image using Wug's toolkit = frozen at the team logo (TWRP) / black screen (CWM).
Flash Stock + Unroot (Soft-Bricked/Bootloop) = FAILED (flash write failure).
So now I'm really stuck and desperate to make the device work again. I've been reading all day long and trying all sorts of solutions to no avail. And it seems far-fetched to me for a device like this to just instantly brick itself without any reason at all.
Can anyone help me with this case ? Or does anyone has any idea what just happened to my tablet ? :crying:
EDIT: I'm afraid that warranty might not work as the device was unlocked and rooted so it's the last solution for me.
Bumpity bump
No one has any idea what happened to the tablet and how to fix it ? I've tried doing some more flashing but to no avail. It just refuses to flash and keeps failing to write the files.
I think you need to leave out on the charger for 1/2hr without doing anything with it. You are probably using what little power it has charged by trying to reboot it, etc.
I had to do that once and it did the trick.
Sent from my Nexus 7 using XDA Free mobile app
There is no reason you should not be able to get in to recovery (power and volume down).
You could call Motorola. They have good tech support.
The exact same thing happened to me. I rooted it months ago and haven't changed a thing since then. It just froze up a few days ago. I restarted and it just gets stuck on the google screen. I can get into the bootloader, but when I try to go to recovery, the google screen comes up and won't go away. I've tried every method I can find for flashing the stock image and absolutely nothing is working. I just get stuck on the google screen.
Please update this if you find a solution!
Do u guys have the most up to date version of whatever particular recovery that you're on?
Yep. I've flashed the stock recovery multiple times to no avail. :/
nexusjas said:
Yep. I've flashed the stock recovery multiple times to no avail. :/
Click to expand...
Click to collapse
If you can't get into recovery or flash any images it sounds to me like a hardware failure. Bad memory maybe? If you've tried everything then RMA to Asus before the one year warranty runs out.
Have you tried to see if your computer sees your N7 by typing fastboot devices if you have the sdk installed?
wantabe said:
If you can't get into recovery or flash any images it sounds to me like a hardware failure. Bad memory maybe? If you've tried everything then RMA to Asus before the one year warranty runs out.
Click to expand...
Click to collapse
Not what I wanted to hear, but you're probably right. Thanks :/
nexusjas said:
Not what I wanted to hear, but you're probably right. Thanks :/
Click to expand...
Click to collapse
I was to slow with my update. Does your computer see your N7 with fastboot?
wantabe said:
I was to slow with my update. Does your computer see your N7 with fastboot?
Click to expand...
Click to collapse
Yes, I can get into the bootloader just fine and I can use fastboot. I go through the flashing process and the command prompt says everything flashed successfully, but when I restart the device, it hangs on the google logo. The same thing happens when I try to boot into recovery.
nexusjas said:
Yes, I can get into the bootloader just fine and I can use fastboot. I go through the flashing process and the command prompt says everything flashed successfully, but when I restart the device, it hangs on the google logo. The same thing happens when I try to boot into recovery.
Click to expand...
Click to collapse
If you fastboot flashed the factory image and can't boot up then it sounds like a hardware problem. Out of ideas, sorry.
wantabe said:
If you fastboot flashed the factory image and can't boot up then it sounds like a hardware problem. Out of ideas, sorry.
Click to expand...
Click to collapse
I'm not sure what happened, but I just ran this little utility again (I've done it many times over the last week or so to no avail) and it actually worked. Hopefully it keeps working!
Thanks for your help!