Related
Hello,
just some hours ago my Galaxy Nexus (SC-04D) rebooted while lying on the table next to me. After several sings of vibration I noticed that the phone doesn't boot completely.
When switching on the phone I get the turn-on-vibration, then the google letters are displayed. Most times the word "google" flickers from left to right over the screen (only the line where the word is supposed to be). Sometimes it boots further and I get the colored "X" displayed. This symbol starts flickering, too and if it went so far it reboots.
Here are two pictures I took from the phone failing to boot:
picpaste.com/img_0001_01-Rmm7kDYb.jpg
picpaste.com/img_0001-eoLqVoiM.jpg
The phone is running stock Android from Docomo. The phone is about 14 months old and has never been unlocked, rooted, modded, taken a bath, ... 'til now.
I tried starting with and without SIM-card, with and without charger attached and let it lie around for several minutes without battery between my tries.
Is there any chance to get my data from the phone or even get it fixed? Please give me a hint what I can do.
Well the Red exclamation mark means that there is a problem with the phone reading the build path. Since you have never rooted the phone, this would mean that the files got corrupt on the phone. With a non-rooted phone a Factory Reset is about the only solution, but is probably only a temporary fix. This is most likely caused by too many apps on the phone and it just freaked out on something eventually.
I think these options might work for you, however I cannot confirm since I have rooted my phone from day one and never looked back:
Power button + up volume= recovery
Thanks GPFboy for your fast response,
GPFboyJS said:
Well the Red exclamation mark means that there is a problem with the phone reading the build path. Since you have never rooted the phone, this would mean that the files got corrupt on the phone. With a non-rooted phone a Factory Reset is about the only solution, but is probably only a temporary fix.
Click to expand...
Click to collapse
As far as I understand a factory reset results in a complete loss of data on the phone, right? So without root/unlock there's no chance to get my data from the phone? That would be really bad.
GPFboyJS said:
This is most likely caused by too many apps on the phone and it just freaked out on something eventually.
Click to expand...
Click to collapse
What is "too many"? I think there are about 35 apps installed atm. By the moment the problem arose wifi and 3g-data,BT,GPS were disabled and just a minute before I took a look how late it was. So nothing special.
GPFboyJS said:
I think these options might work for you, however I cannot confirm since I have rooted my phone from day one and never looked back:
Power button + up volume= recovery
Click to expand...
Click to collapse
The phone reaches fastboot mode, but when selecting recovery mode I get the google logo and after that the open android with the red exclamation mark. That doesn't look good, does it?
BrainSD said:
The phone reaches fastboot mode, but when selecting recovery mode I get the google logo and after that the open android with the red exclamation mark. That doesn't look good, does it?
Click to expand...
Click to collapse
thats stock recovery.
is your bootloader already unlocked or no?
Zepius said:
is your bootloader already unlocked or no?
Click to expand...
Click to collapse
It's still locked.
you might try and go into recovery,
then press (i think) power and vol up and try and see if you can wipe just cache.
Zepius said:
you might try and go into recovery,
then press (i think) power and vol up and try and see if you can wipe just cache.
Click to expand...
Click to collapse
ok, I tried that several time now, but it didn't work. The only thing when I select recovery and press the power button is that I get the google logo and then the dead android + red exclamation sign, but this screen is scrambled and shows flickering pixels as shown in one of my pictures in the first post. So recovery mode seems not to work for me?
Is there a software or hardware problem with my device?
BrainSD said:
ok, I tried that several time now, but it didn't work. The only thing when I select recovery and press the power button is that I get the google logo and then the dead android + red exclamation sign, but this screen is scrambled and shows flickering pixels as shown in one of my pictures in the first post. So recovery mode seems not to work for me?
Is there a software or hardware problem with my device?
Click to expand...
Click to collapse
You can try to unlock your boorloader and flash a custom recovery like cwm or twrp. Maybe that helps. You can always go back and re lock it.
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
You can try to unlock your boorloader and flash a custom recovery like cwm or twrp. Maybe that helps. You can always go back and re lock it.
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
He wants to keep his data... which, at this point, seems rather impossible.
If fastboot doesn't solve it, i would try omapflash, OP. That "flickering" doesn't look good.
beekay201 said:
He wants to keep his data... which, at this point, seems rather impossible.
If fastboot doesn't solve it, i would try omapflash, OP. That "flickering" doesn't look good.
Click to expand...
Click to collapse
Well if I was him I would be more worried about my expensive phone instead of data. Maybe a lesson for later to have a backup
Sent from my Galaxy Nexus using XDA Premium HD app
beekay201 said:
He wants to keep his data... which, at this point, seems rather impossible.
If fastboot doesn't solve it, i would try omapflash, OP. That "flickering" doesn't look good.
Click to expand...
Click to collapse
Yes exactly this is the point. Since I don't have a current data backup the first thing to try is getting my data from the phone. I already tried temporary loading the clockwork recovery through fastboot - with the galaxy nexus toolkit and by hand(sdk) - but it failed ("Bootloader locked").
What I'm wondering about is the fact that the phone seems to behave normally in odin and fastbood mode but going nuts the moment it's expected to boot. Besides the flickering google logo and the "matrix-modded" dead android it even ended up in a totally green screen one time.
At the moment I don't dare trying to unlock/flash the phone because of being afraid getting stuck and ending up with the phone being in some kind of undefined / totally broken state. Initially I was in hope of being able to rescue my data but now i will try my luck with docomo support first.
As far as I understood omapflash is primary used for recovering bricked phones not even starting to odin/fastboot mode. But thanks to your hint I found http://forum.xda-developers.com/showthread.php?t=2016628 "Unlock bootloader on GT-I9250 without wipe and without root" This might bring some chance for data access.
I will try to get through 1 to 4 of the guide first and see how far I get.
If this won't work I might try to unlock, recover and try to "undelete" what's possible. (http://forum.xda-developers.com/showthread.php?t=1994705)
Does this order make sense?
Btw, having a dead phone is bad, of course, even when I got it new for 2300Yen but loosing some pictures i really liked and having no phone atm currently hurts more. Especially when knowing that I was thinking of copying all photos to my computer only one day before when I pulled only some minor important ones from the phone I needed for work and planned to do a full backup and unlock this weekend when I get back my 'Milestone' currently lent to someone else.
Once again something I learned. Backup! Even you phone.
BrainSD said:
As far as I understood omapflash is primary used for recovering bricked phones not even starting to odin/fastboot mode. But thanks to your hint I found http://forum.xda-developers.com/showthread.php?t=2016628 "Unlock bootloader on GT-I9250 without wipe and without root" This might bring some chance for data access.
Click to expand...
Click to collapse
!!!
It will work actually, I read/also replied to that thread! I had forgotten about it, sorry. I must say that if you had already read the stickies that matter, you'd already know about it.
It will unlock your bootloader, bypassing fastboot. Still, it's not for the faint hearted. I refered to omapflash because its a low level tool, it doesn't require the bootloader to be unlocked, and is able to restore the bootloader to working state, and I got there because you mentioned you see graphical glitches/flickering which may indicate bootloader partition failure and/or consequent corruption.
I think that's your best shot at trying to get your data back. After unlock, boot to fastboot and 'fastboot boot custom_recovery.img', and grab your stuff (if you can) from /data/.
beekay201 said:
!!!
It will work actually, I read/also replied to that thread! I had forgotten about it, sorry. I must say that if you had already read the stickies that matter, you'd already know about it.....
Click to expand...
Click to collapse
Your hint was very helpful for me getting the right direction since I'm just starting to dig into all this stuff.
Unlocking went quite well. Writing back to the phone worked without a problem and after that it's shown as unlocked in fastboot mode.
It even started loading clockwork recovery with fastboot. But the initial cw recovery screen (their logo and the cw recovery footer) was already shown on a scattered screen (google logo + unlocked lock was fine). After that the usb port connected and disconnected several times, then the screen went blank.
May this be because of corrupted fs or defective hw?
From my understanding with omapflash one have raw access to the phones internal memory similar to with dd on Unix/Linux. So currently I'm trying to dump ("upload") the emmc from the phone - actually in smaller chunks since omapflash needs to allocate all the memory in advance for the upload and to prevent interruptions. This will take a while...
After that I want to try to 'cat' the parts together and mount the filesystem - might be possible to do this from linux since it seems to be ext4 filesystems
BrainSD said:
Your hint was very helpful for me getting the right direction since I'm just starting to dig into all this stuff.
Unlocking went quite well. Writing back to the phone worked without a problem and after that it's shown as unlocked in fastboot mode.
It even started loading clockwork recovery with fastboot. But the initial cw recovery screen (their logo and the cw recovery footer) was already shown on a scattered screen (google logo + unlocked lock was fine). After that the usb port connected and disconnected several times, then the screen went blank.
May this be because of corrupted fs or defective hw?
From my understanding with omapflash one have raw access to the phones internal memory similar to with dd on Unix/Linux. So currently I'm trying to dump ("upload") the emmc from the phone - actually in smaller chunks since omapflash needs to allocate all the memory in advance for the upload and to prevent interruptions. This will take a while...
After that I want to try to 'cat' the parts together and mount the filesystem - might be possible to do this from linux since it seems to be ext4 filesystems
Click to expand...
Click to collapse
Great, so far so good.
Yeah, they're ext4 images, but sparse images i believe - link
Hi everybody,
I'm so angry with my Nexus 7 (wifi 2013) because I just made it mess up.
Let me tell you how stupid I was.
First, I tried to root but it failed.
Second, I used 'Back to Stock' with 'Nexus Root Toolkit v1.7.2'. Finally, I got stuck at Google logo
I tried some solutions on the internet but it still unchanged anything.
Could you show me how to fix it, please?
Thank you so much.
This is the images of error that I got (I'm sorry I cannot insert image because I'm a new member of this forum, could you go to the link below to see more details?)
s1019.photobucket.com/user/namserious/media/Error_Nexus7.png.html
Your /system is broken.
Try restoring factory defaults using this post:
http://forum.xda-developers.com/showthread.php?p=45671279#post45671279
Restoring Successfully
sfhub said:
Your /system is broken.
Try restoring factory defaults using this post:
http://forum.xda-developers.com/showthread.php?p=45671279#post45671279
Click to expand...
Click to collapse
Awesome, sfhub :good: :laugh:
Thank you so much. I have restored successfully.
This is my result
i1019.photobucket.com/albums/af319/namserious/WP_20131018_001.jpg
How did you do that?
namserious said:
Awesome, sfhub :good: :laugh:
Thank you so much. I have restored successfully.
This is my result
i1019.photobucket.com/albums/af319/namserious/WP_20131018_001.jpg
Click to expand...
Click to collapse
Hey namserious,
How did you get it working? Did you use the Mini guide given by sfhub? I'm having the same issues with my nexus 7 (2013). I only used for one day. Restarted on the second day and never got anything after the Google logo. Also, my phone wasn't rooted, so I didn't have developer options turned on and since I can't get into the system, I can't turn it on either. Will that make a difference?
Thanks.
nexussucks said:
Hey namserious,
How did you get it working? Did you use the Mini guide given by sfhub? I'm having the same issues with my nexus 7 (2013). I only used for one day. Restarted on the second day and never got anything after the Google logo. Also, my phone wasn't rooted, so I didn't have developer options turned on and since I can't get into the system, I can't turn it on either. Will that make a difference?
Thanks.
Click to expand...
Click to collapse
If you didn't root the device or do anything else with it, you should be able to get into Recovery Mode and do a factory reset.
https://support.google.com/nexus/answer/2668187?hl=en
Even recovery doesn't work
I'm not able to get into recovery mode. When I select recovery mode, the tablet starts and displays Google logo again and gets stuck there again.
nexussucks said:
I'm not able to get into recovery mode. When I select recovery mode, the tablet starts and displays Google logo again and gets stuck there again.
Click to expand...
Click to collapse
When you get into recovery you will see just the droid and the red triangle. At this screen you will need to push the power button then Vol Up and release. I had to do that about 3 times then I was able to get the menu items. From there I did a factory reset. After that I was good to go. Hope this helps!
Kind Regards,
Rb
RenderBroken said:
When you get into recovery you will see just the droid and the red triangle. At this screen you will need to push the power button then Vol Up and release. I had to do that about 3 times then I was able to get the menu items. From there I did a factory reset. After that I was good to go. Hope this helps!
Kind Regards,
Rb
Click to expand...
Click to collapse
Thanks Rb, But the thing is I don't get the droid and red triangle at all after I select recovery mode. I have tried everything but nothing happens. I still end up with dreadful Google logo. Suddenly I'm beginning to really hate it.
nexussucks said:
Thanks Rb, But the thing is I don't get the droid and red triangle at all after I select recovery mode. I have tried everything but nothing happens. I still end up with dreadful Google logo. Suddenly I'm beginning to really hate it.
Click to expand...
Click to collapse
You could try re-flashing the factory image.
http://forum.xda-developers.com/showthread.php?t=2487757
Latest factory image build is JSS15R
https://developers.google.com/android/nexus/images#razor
nexussucks said:
Thanks Rb, But the thing is I don't get the droid and red triangle at all after I select recovery mode. I have tried everything but nothing happens. I still end up with dreadful Google logo. Suddenly I'm beginning to really hate it.
Click to expand...
Click to collapse
Im sorry, I didnt read correctly. I had issues too restoring back to Stock since my setup was all changed. I had to use these steps. I am going to assume you know how to use fastboot and what it is.
DISCALAIMER! These steps will delete your user data!!!!
> fastboot erase boot
> fastboot erase cache
> fastboot erase recovery
> fastboot erase system
> fastboot erase userdata
> fastboot flash bootloader BOOTLOADER.img
> fastboot reboot-bootloader
> fastboot -w update IMAGE.zip
So after that I was able to get past the google logo but just stuck at the boot logo (Multi Colored X) I then had to get into recovery using the steps I stated above then did a factory reset.
Success
Rb, I just tried your instructions. YOU ARE A SAVIOUR :laugh:. After 2 days of continous troubleshooting, I had given up my hopes and was thinking of returning it. But suddenly after getting used to seeing the Google logo, I just noticed the android robot on the screen. And after a few seconds I saw the welcome screen... Viola.
Thanks man, I really appreciate your help. :good:
nexussucks said:
Rb, I just tried your instructions. YOU ARE A SAVIOUR :laugh:. After 2 days of continous troubleshooting, I had given up my hopes and was thinking of returning it. But suddenly after getting used to seeing the Google logo, I just noticed the android robot on the screen. And after a few seconds I saw the welcome screen... Viola.
Thanks man, I really appreciate your help. :good:
Click to expand...
Click to collapse
Glad to help! The best thing about Nexus devices are the different fail-safes. If the Rom is screwed up you can flash a new one from recovery. If recovery is screwed you flash a new one from the boot loader. If the boot loader is screwed you can flash another from recovery. Also the N7 2013 tablet is the best for the money. I user mine for work. I am a tech admin for a school district and have certain tools located on my desktop (Active Directory, Printer Manager, etc) and I have RDP installed on my N7. Now when I need to reset a password or whatever i can just RDP to my desktop. This tablet has made my life easier and hopefully yours will too now.
Kind Regards
Rb
Name change
RenderBroken said:
Glad to help! The best thing about Nexus devices are the different fail-safes. If the Rom is screwed up you can flash a new one from recovery. If recovery is screwed you flash a new one from the boot loader. If the boot loader is screwed you can flash another from recovery. Also the N7 2013 tablet is the best for the money. I user mine for work. I am a tech admin for a school district and have certain tools located on my desktop (Active Directory, Printer Manager, etc) and I have RDP installed on my N7. Now when I need to reset a password or whatever i can just RDP to my desktop. This tablet has made my life easier and hopefully yours will too now.
Kind Regards
Rb
Click to expand...
Click to collapse
This is my first experience with a Nexus device and I might have judged it in a wrong way. But I think the problem is not the device but the information regarding the latest Nexus devices. Hopefully there will be more workarounds of the new Nexus devices.
I guess I will have to change my username
nexussucks said:
This is my first experience with a Nexus device and I might have judged it in a wrong way. But I think the problem is not the device but the information regarding the latest Nexus devices. Hopefully there will be more workarounds of the new Nexus devices.
I guess I will have to change my username
Click to expand...
Click to collapse
This is the price we pay for the cutting edge. Also , at least for me, this is part of the fun. Now I have a much better understanding of Android than if I did being an avg. user. I was thinking the same about the name change. lol
RenderBroken said:
Glad to help! The best thing about Nexus devices are the different fail-safes. If the Rom is screwed up you can flash a new one from recovery. If recovery is screwed you flash a new one from the boot loader. If the boot loader is screwed you can flash another from recovery. Also the N7 2013 tablet is the best for the money. I user mine for work. I am a tech admin for a school district and have certain tools located on my desktop (Active Directory, Printer Manager, etc) and I have RDP installed on my N7. Now when I need to reset a password or whatever i can just RDP to my desktop. This tablet has made my life easier and hopefully yours will too now.
Kind Regards
Rb
Click to expand...
Click to collapse
Hey, know it's been a little bit but my nexus 7 says no OS in TWRP recovery. I tried flashing it back to stock but it doesn't work. The bootloader is locked and when I try to do anything manually it just hangs on stuff like erasing 'system'/cache etc... in fastboot. I have not been able to find anything to work. And when I try to fastboot oem unlock it gets stuck when i press volume up and power to accept unlocking it. I have tried different cables and another computer. maybe I should try a third computer.. Do you have any suggestions?
RenderBroken said:
Im sorry, I didnt read correctly. I had issues too restoring back to Stock since my setup was all changed. I had to use these steps. I am going to assume you know how to use fastboot and what it is.
DISCALAIMER! These steps will delete your user data!!!!
> fastboot erase boot
> fastboot erase cache
> fastboot erase recovery
> fastboot erase system
> fastboot erase userdata
> fastboot flash bootloader BOOTLOADER.img
> fastboot reboot-bootloader
> fastboot -w update IMAGE.zip
So after that I was able to get past the google logo but just stuck at the boot logo (Multi Colored X) I then had to get into recovery using the steps I stated above then did a factory reset.
Click to expand...
Click to collapse
I know this is an old thread, but I'm having this exact issue. I'm just stuck on the google screen. I can get into the bootloader just fine, but not the recovery. I followed these directions. Flashed the factory image and everything. But I still can't get past the google logo. I've followed every bit of advice I could find on this issue and I can't seem to get it working. Any help would be greatly appreciated!
*bump*
Does anyone know what's going on? I've tried everything I could find. Multiple times. From the suggestions listed here to the WUG kit to this http://forum.xda-developers.com/showthread.php?t=2381582
Nothing is working. I goes through the reflashing successfully. The command prompt says that everything is done. And then it just gets stuck at the Google screen again. I'm at my wits end and have no idea what to try next. I know that because I can get into the bootloader still, there has to be SOMETHING that will work. But I just don't know. Any ideas?
is there a android L Developers Preview flashable zip? thanks
Sent from my Nexus 7 using XDA Free mobile app
Anyone figure out what is causing this? I got a remanufactured 2nd Gen N7 16G yesterday. Updated to 4.4.4 over the air. Then unlocked the bootloader and rooted. Everything went fine. I installed Franco's latest kernel (r17) over stock and all was well. However, this morning, while using the device in the middle of GoW, it rebooted to the Google Screen and froze there. I could boot into the bootloader and have my comp recognize the device, so could ADB and Fastboot, however, I could not get into recovery. (I had installed TWRP 2.7.1.1 when I rooted). Trying to get into recovery would just freeze at the Google Screen.
So, I then tried both manually ADB'ing commands, as well as using Wug's Toolkit, and both methods seemed to complete successfully without error (I was using the latest Razor-Flo 4.4.4 files from Google's Dev Page so it is not an issue where I am using the Gen 1 files for Grouper or anything like that in error), however, neither method allowed me to boot into recovery, and left me at the same place. No matter what I did, I was stuck at that screen. I ended up calling Asus to RMA.
So, while it is not a current issue for me, I am interested to know if anyone has sorted what the root cause is, and whether it is an issue on the hardware side. I am not a complete noob to the N7 (I have 2 Groupers), and have been modding for a few years on Samsungs, and until this morning, have never had a soft brick I could not fix. This time, I gave up.
Same problem here, I have a Deb 32g, it went a little wonky and then rebooted. No amount of flashing and wiping and fastbooting has been able to recovery it. Gets stuck on Google Logo no matter what I do. Can't get recovery. Can't boot past Google. It will do fastboot without errors, but that's the only thing it will do.
Last night I installed geefree on my phone from the app store and used it to install TWRP. I downloaded a nightly CM11 and an appropriate gapps. Using geefree I rebooted to recovery (never figured out the button combination to boot to recovery "naturally") and installed both of the zips. This could be where I made my mistake, I installed both at the same time.
Now my phone loops, displaying the LG logo for a few seconds, then shutting off and rebooting before repeating the process. I can't seem to get it to go into download mode or the recovery menu. I've tried power+up, power+down, down+up and each of those while plugging the device in, etc. I can get the device to a hardware key control mode, though it doesn't seem too useful.
How can I save my phone? This forum has been a great resource in the past and I'm very grateful for the many tutorials I've followed rooting other devices. Hopefully you guys can save the day once again!
Volume up plus power is how to access recovery on sprint.
What stock sw version were you on before you flashed cm?
Did you wipe data before flashing?
Sent from my LG-LS970 using xda app-developers app
I was using stock 4.2.2, I believe. I didn't wipe the data (shame on me), a bad habit that I picked up from my first rooted device, the Samsung Moment. It didn't ever matter on that one, afaik. Thanks for the reply!
Edit: Volume up and power whether plugged in or not takes me to the hardware key control mode screen.
Second Edit: http://forum.xda-developers.com/showthread.php?t=2432476&page=35 I also found this thread where someone seems to be experiencing similar issues and they fix it with "LG Utility." Is that a PC application? It's a little vague to google, but I've been trying!
I have a bootloop issue every time i flash a rom i have to wipe all but sd flash roms and gapps the i do a restore from twrp and oly restore my boot image only and they boot no prob
I'm kind of starting to suspect my power button doesn't work at all for whatever reason. I have a lot of difficulty getting the phone to shut down, then it doesn't seem to easily power up. It's a strange collection of problems. Would a Sprint repair place be able to fix this?
If they have parts on hand if not either a swap out or a sendoff
Same problem here - bootloop and no download mode - CWM works! - urgently need help
I guess I have the same problem as InlineFourPower (apart from that my power-button has no problem).
I am stuck in bootloop since I tried to upgrade to Kitkat a few days ago. Now I can´t get into download mode any more, nor into fastboot or anything else. Only CWM works.
From within CWM I can successfully flash ROMs but that doesn´t help, since afterwards I am still stuck in bootloop. It is possible, however, to push files via adb-commands while I am in CWM.
Does anybody have an idea how to go from here or how to get download-mode back?
Device is recognized but can´t be mounted - bricked forever?
Parinibbana said:
I guess I have the same problem as InlineFourPower (apart from that my power-button has no problem).
I am stuck in bootloop since I tried to upgrade to Kitkat a few days ago. Now I can´t get into download mode any more, nor into fastboot or anything else. Only CWM works.
From within CWM I can successfully flash ROMs but that doesn´t help, since afterwards I am still stuck in bootloop. It is possible, however, to push files via adb-commands while I am in CWM.
Does anybody have an idea how to go from here or how to get download-mode back?
Click to expand...
Click to collapse
I tried a few things on Linux.
After terminal-command "ls /dev/sd*" when the device is unplugged from the computer I get "/dev/sda".
When the device is connected via USB, I get: "/dev/sda /dev/sdb"
So sdb is my LG G2.
So I went on to the next command: "gdisk -l /dev/sdb"
As a result I get: "Problem opening /dev/sdb for reading! Error is 123."
Does it mean that the phone isn´t mounted or what? Now I´ve connected my phone to another Linux machine with the same result. It is recognised (p.e. as sdd), but there is no sdd1. Seems as if it is recognized, but can´t be mounted. Does that mean my device is bricked for good? That´s it?
to get the phone into download mode you have to plug the usb cord in and hold VOL+, so to get this right as I have a case on mine, plug the usb into the phone first then hold VOL+ and plug into usb port on the computer.
it does take a loooong time to power down the phone with the button when stuck in a boot loop, just keep holding it until it shuts off, it will shut off eventually!!
plug the phone in while in download mode to install drivers and set com ports, then unplug before you begin your flash with LGFlashTool, hope this helps you out.
Cronic2009 said:
to get the phone into download mode you have to plug the usb cord in and hold VOL+, so to get this right as I have a case on mine, plug the usb in first then hold VOL+ and plug into usb port.
it does take a loooong time to power down the phone with the button when stuck in a boot loop, just keep holding it until it shuts off, hope this helps
Click to expand...
Click to collapse
Thanks Cronic2009 for your advice.
There are, however, szenarios where download-mode is not accessible any more. Neither by using the hardware-keys, nor by using the adb-command.
After four days of resarch and a lot of trial and error, I finally unbricked my F320L using the two adb-commands outlined at the beginning of that thread: http://forum.xda-developers.com/showthread.php?t=2451696
Worked like a charm.
Thanks everyone for your advice.
no problem buddy, glad you got it figured out, good luck to you from here on out!
FYI, that link doesn't work
I just wanted to ask anyone who might know, since the bootloader of the LS980 is locked, we cannot "break" this correct, so no matter what commands we decide to run through root, we cant touch the true bootloader there for LS980 fail safe? (Besides Acts of God, EMP, ect)
Cronic2009 said:
no problem buddy, glad you got it figured out, good luck to you from here on out!
Click to expand...
Click to collapse
Thanks for letting me know. I corrected the link in my previous post.
Be sure if you use a aosp based rom to flash the ZV8 modem. Your can use dr87 or furnance kernals after you flash the zva modem althought i have encountered soft brick due to this.
so i'm having this exact issue and i don't know how to get out of it. i just need to transfer the radio to my phone somehow but nothing shows up under adb devices. i'm trying to the lg mobile support tool now. its downloading the software. but if it doesn't work does any one have any fixes?
edit: i fixed it by following this http://forum.xda-developers.com/showthread.php?p=51637410&highlight=download+fail#post51637410
pitbullmommy45245 said:
so i'm having this exact issue and i don't know how to get out of it. i just need to transfer the radio to my phone somehow but nothing shows up under adb devices. i'm trying to the lg mobile support tool now. its downloading the software. but if it doesn't work does any one have any fixes?
edit: i fixed it by following this http://forum.xda-developers.com/showthread.php?p=51637410&highlight=download+fail#post51637410
Click to expand...
Click to collapse
Thank You for sharing you fixed your issue pittbullmommy but the link you posted points back to a post about a failed run on LGFlashTool, will you please fix the link and point it to the post/guide you used to fix your phone, it may help others stuck in a similar situation, glad to hear you got it fixed and working, best of luck with it from here on out!
Hi all
was just about to start a new thread but didn't want to get into trouble..anyway I am in need of some assistance please.my ls980 has been bricked for some time now been searching all over the internet for a solution to be stuck back at square one.found this video on youtube which is pretty much exactly what my phone is doing.I have used lg flash tool to revert to stock and still nothing I lost root doing that but last night,I managed to regain root access I have no idea how but it happened when i clicked ioroot batch file i went into download mode and it stated bottom left ROOTED in red so i managed that but that is it still doing what is being shown in the video its on youtube
watch?v=PjLF-pBhZSY
please if anyone has the know how I would like to fix this phone rather then bin it thank you all happy 4th everyone
After using tot and flash tool to get back to stock, did you try going into stock recovery and do a factory data reset? I know it sounds stupid especially after a tot but try it. Couldn't hurt
Sent from my LG-LS980 using Tapatalk
Borderline noob here, so please bear with me...
I have been using TWRP 2.7.0.0 to do all my work, and I was able to get the Lego ROM installed with ZVA. I got into too big of a hurry and forgot to make a backup of stock. I've also been unsuccessful in trying to install ZVC modem and firmware. Thankfully ZVA works as does the LEGO ROM, but I'd like to have stock there to access as well. The stockZVC that's on the Android Development page has been getting stuck (bootloop?) on the Sprint Spark logo. I've done TWRP's factory reset with no success. Any help would be great.
Thanks in advance!
Yes sir I've tried that and more to no avail is there anything I can do through adb I'm on stock recovery phone doesn't stay on long enough to install anything
sarfdawg said:
Borderline noob here, so please bear with me...
I have been using TWRP 2.7.0.0 to do all my work, and I was able to get the Lego ROM installed with ZVA. I got into too big of a hurry and forgot to make a backup of stock. I've also been unsuccessful in trying to install ZVC modem and firmware. Thankfully ZVA works as does the LEGO ROM, but I'd like to have stock there to access as well. The stockZVC that's on the Android Development page has been getting stuck (bootloop?) on the Sprint Spark logo. I've done TWRP's factory reset with no success. Any help would be great.
Thanks in advance!
Click to expand...
Click to collapse
You ever get her fixed?
Okay, first of all, I would like to mention that I'm new at all of this.
I brought this phone 2 years ago and 2 months ago I decided I was going to root it. So I switched to CyanogenMod 11 M4 and did everything that was required i.e., unlocking bootloader and flashing a recovery and all that.
Just 2 days ago my phone showed an update available to CyanogenMod 11 M5. So I downloaded it and then the phone took me to my recovery. There I made a backup and flashed the M5.zip file that was downloaded. But when I rebooted my system a popup came saying com.process.phone has stopped unexpectedly. I pressed OK but it was persistent. I had no idea what to do so I booted into recovery and wiped data and then performed a restore of my previous backup that I had taken. Half-way through the backup the phone just switched off and then restarted with the traditional HTC logo and then it switched off again and restarted again and this process kept looping.
I loaded my bootloader and connected the phone via fastboot to my computer and erased the cache and flashed the recovery again. Then wehn I restored it started working normally as it did before.
But the battery was around 20% at that time so I left it to charge overnight. When I woke up the next day it was insanely hot and the LED was constantly red but it wouldnt wake up. So I loaded into recovery to restore it again but it kept on saying "Error mounting /system!"
And then after a few tries it switched off. Now it won't wake up again. Even the LED seems dead.
Has anyone of you ever encountered a similar issue? Any help would be appreciated. I've tried all the button combinations that are recognized by the device but nothing seems to work.
dead battery
i guess its because of corrupt or dead battery
try giving external power or replace battery and try
further you could even try other options like booting cwm
flashing last kernel image found
jhakjhuk1853 said:
i guess its because of corrupt or dead battery
try giving external power or replace battery and try
further you could even try other options like booting cwm
flashing last kernel image found
Click to expand...
Click to collapse
Booting CWM or flashing the last kernel image aren't an option because the device doesn't switch on at all. I cannot access the bootloader.
try changing battery
try changing battery by buying new battery and connecting
or remove battery and charge it with external source i guess u must have heard of jump starting battery
kartikeym309 said:
Booting CWM or flashing the last kernel image aren't an option because the device doesn't switch on at all. I cannot access the bootloader.
Click to expand...
Click to collapse
kartikeym309 said:
Okay, first of all, I would like to mention that I'm new at all of this.
I brought this phone 2 years ago and 2 months ago I decided I was going to root it. So I switched to CyanogenMod 11 M4 and did everything that was required i.e., unlocking bootloader and flashing a recovery and all that.
Just 2 days ago my phone showed an update available to CyanogenMod 11 M5. So I downloaded it and then the phone took me to my recovery. There I made a backup and flashed the M5.zip file that was downloaded. But when I rebooted my system a popup came saying com.process.phone has stopped unexpectedly. I pressed OK but it was persistent. I had no idea what to do so I booted into recovery and wiped data and then performed a restore of my previous backup that I had taken. Half-way through the backup the phone just switched off and then restarted with the traditional HTC logo and then it switched off again and restarted again and this process kept looping.
I loaded my bootloader and connected the phone via fastboot to my computer and erased the cache and flashed the recovery again. Then wehn I restored it started working normally as it did before.
But the battery was around 20% at that time so I left it to charge overnight. When I woke up the next day it was insanely hot and the LED was constantly red but it wouldnt wake up. So I loaded into recovery to restore it again but it kept on saying "Error mounting /system!"
And then after a few tries it switched off. Now it won't wake up again. Even the LED seems dead.
Has anyone of you ever encountered a similar issue? Any help would be appreciated. I've tried all the button combinations that are recognized by the device but nothing seems to work.
Click to expand...
Click to collapse
After the phone updated did u extract and flash boot.img from M5.zip?
convict_moody said:
After the phone updated did u extract and flash boot.img from M5.zip?
Click to expand...
Click to collapse
No, I didn't do that because when I switched over from a CM11 Nightly to CM11 Snapshot M4 I didn't extract and flash the boot image even then and everything was working perfectly. So, I didn't think I would need to.
kartikeym309 said:
No, I didn't do that because when I switched over from a CM11 Nightly to CM11 Snapshot M4 I didn't extract and flash the boot image even then and everything was working perfectly. So, I didn't think I would need to.
Click to expand...
Click to collapse
U should give it a try, since some CM updates triggers the kernel itself so boot.img should be flashed again.
convict_moody said:
U should give it a try, since some CM updates triggers the kernel itself so boot.img should be flashed again.
Click to expand...
Click to collapse
That is the problem. I can't. When I connect it to the PC it just never shoes up and I have no luck getting into the bootloader. Do you know of any reliable unbricking guides? I'm guessing my phone is possibly bricked.
kartikeym309 said:
That is the problem. I can't. When I connect it to the PC it just never shoes up and I have no luck getting into the bootloader. Do you know of any reliable unbricking guides? I'm guessing my phone is possibly bricked.
Click to expand...
Click to collapse
Check the guides in here:
HTC One X Reference
convict_moody said:
Check the guides in here:
HTC One X Reference
Click to expand...
Click to collapse
Nah, nothing is suitable. There are guides on how not to brick your device but nothing to unbrick it. :|
Thanks anyways. It's appreciated.
Another bricked HOX apparently. There seem to be loads of these on the internet. In my case, it can't have to do with custom roms or rooting since I never messed around with stuff like that. I even opened the HOX and checked all cables etc. There is no part that looks damaged or otherwise suspicious.
What can we do? How can we at least get access to the data in the internal memory?
Don't know if this will help, but it might be that it hasn't actually charged properly over night and has drained itself to death.
Try plugging into PC and get to fast boot.
Fastboot = Volume Down + Power Button
Then make a batch file out of this:
" @echo off
:start
fastboot getvar battery-voltage
fastboot reboot-bootloader
ping /n 6 localhost >nul
goto start
"
Click to expand...
Click to collapse
Then run the Batch File
Credit to Floepie for writing the .bat
Wilks3y said:
Don't know if this will help, but it might be that it hasn't actually charged properly over night and has drained itself to death.
Try plugging into PC and get to fast boot.
Fastboot = Volume Down + Power Button
Then make a batch file out of this:
Then run the Batch File
Credit to Floepie for writing the .bat
Click to expand...
Click to collapse
Unfortunately, there's no way this could help. because the HOX is literally dead. There is not even a charging indication when plugged into a PC or the wall charger. And thus it's not recognised by the PC and fastboot won't find it.
Just got the XL on Friday. Loved it.
Unlocked the bootloader about 45 minutes ago. Wiped upon reboot (as normal). Google logo displayed with progress bar but the animation never stopped.
Downloaded the factory image from Nov. Ran the flash-all.bat from bootloader. No errors. Rebooted. Got a "Your device is corrupt" error. Phone stuck on the Google boot screen. Going into recovery just gives me a dead droid.
Attempting to flash the 8.1 developer preview results in the same issue. As of right now, nothing seems to boot at all. I've changed USB-C cables, since I've read about those causing issues, but still the same.
derekr44 said:
Just got the XL on Friday. Loved it.
Unlocked the bootloader about 45 minutes ago. Wiped upon reboot (as normal). Google logo displayed with progress bar but the animation never stopped.
Downloaded the factory image from Nov. Ran the flash-all.bat from bootloader. No errors. Rebooted. Got a "Your device is corrupt" error. Phone stuck on the Google boot screen. Going into recovery just gives me a dead droid.
Attempting to flash the 8.1 developer preview results in the same issue. As of right now, nothing seems to boot at all. I've changed USB-C cables, since I've read about those causing issues, but still the same.
Click to expand...
Click to collapse
I have no experience with your issue but it sounds like a soft brick. Im sure if you follow this guide ypu can fix it. https://forum.xda-developers.com/pixel-2-xl/how-to/guide-unlock-flash-root-pixel-2-xl-t3702418 hopefully this helps until someone who really knows can help you.
Dielahn said:
I have no experience with your issue but it sounds like a soft brick. Im sure if you follow this guide ypu can fix it. https://forum.xda-developers.com/pixel-2-xl/how-to/guide-unlock-flash-root-pixel-2-xl-t3702418 hopefully this helps until someone who really knows can help you.
Click to expand...
Click to collapse
That simple thread actually gave me an idea. I grabbed the latest SDK tools. Presto!
Note to anyone else with this issue...
derekr44 said:
Just got the XL on Friday. Loved it.
Unlocked the bootloader about 45 minutes ago. Wiped upon reboot (as normal). Google logo displayed with progress bar but the animation never stopped.
Downloaded the factory image from Nov. Ran the flash-all.bat from bootloader. No errors. Rebooted. Got a "Your device is corrupt" error. Phone stuck on the Google boot screen. Going into recovery just gives me a dead droid.
Attempting to flash the 8.1 developer preview results in the same issue. As of right now, nothing seems to boot at all. I've changed USB-C cables, since I've read about those causing issues, but still the same.
Click to expand...
Click to collapse
By the way, the dead Droid is recovery, from that screen, hold power and press up for recovery menu, in case you ever get stuck again
And just for future reference for others who may be in a similar issue and stumble across this thread...
As long as you've successfully unlocked your bootloader and "fastboot devices" successfully pulls up your device, you'll be just fine. You just gotta take a step back, breath and then make sure your SDK tools are updated before moving forward.
if the flash tool isn't working, use my script:
https://forum.xda-developers.com/pi...ol-deuces-bootloop-recovery-flashing-t3704761
i know this is probably going to sound really stupid but somehow i bricked my phone as well....not exactly sure what happened but it had to do with something after installing/booting TWRP. anyway, i am stuck with nothing on my phone and can't seem to do anyting....derek, how did you use sdk to fix???
*edit I can't even have fastboot devices pull my phone....am i really f'ed?
warlord1352 said:
i know this is probably going to sound really stupid but somehow i bricked my phone as well....not exactly sure what happened but it had to do with something after installing/booting TWRP. anyway, i am stuck with nothing on my phone and can't seem to do anyting....derek, how did you use sdk to fix???
*edit I can't even have fastboot devices pull my phone....am i really f'ed?
Click to expand...
Click to collapse
If you cannot get the Bootloader to load, then you are seriously SOL. You have a hard bricked device.
Only thing you can do now is raise a support case with Google and hope that allow you to get a replacement with the only explanation being, "The phone restarted on it's own and never came back up." Or something similar and vague without expressly telling them what you did.
warlord1352 said:
i know this is probably going to sound really stupid but somehow i bricked my phone as well....not exactly sure what happened but it had to do with something after installing/booting TWRP. anyway, i am stuck with nothing on my phone and can't seem to do anyting....derek, how did you use sdk to fix???
*edit I can't even have fastboot devices pull my phone....am i really f'ed?
Click to expand...
Click to collapse
Make sure you try a different cable to connect your phone to your PC.. I had the same issue, and I try two different cable before my device accepted the flash-all
Okay, so somehow fortunately I was able to get back into my TWRP 1 last time and able to push my files I needed to boot it back up...
Raistline said:
If you cannot get the Bootloader to load, then you are seriously SOL. You have a hard bricked device.
Only thing you can do now is raise a support case with Google and hope that allow you to get a replacement with the only explanation being, "The phone restarted on it's own and never came back up." Or something similar and vague without expressly telling them what you did.
Click to expand...
Click to collapse
The funny thing is I was able to and was in bootloader but I couldn't use any commands from my computer (as far as I know) which is why I was freaking out.
I should've but I didn't actually try using other cables. I did try other usb ports but that didn't do anything.
I still kind of believe that my phone (somehow) got messed up from loading TWRP. I don't know if it's because it is still beta or what but I am like 99% sure it was from that as I can't see anything else being the problem.
warlord1352 said:
i know this is probably going to sound really stupid but somehow i bricked my phone as well....not exactly sure what happened but it had to do with something after installing/booting TWRP. anyway, i am stuck with nothing on my phone and can't seem to do anyting....derek, how did you use sdk to fix???
*edit I can't even have fastboot devices pull my phone....am i really f'ed?
Click to expand...
Click to collapse
just install the lastest fastboot and adb drivers from google and flash the factory image using commands or use any script .
after that everytime my phone got stuck on google logo .
how i fixed - Temporary boot twrp beta2 recovery using cmd (fastboot boot abc.img) "here abc refers to the correct name of the img file" and once booted into recovery go to advanced and select Partition A and reboot.
It will boot up just fine
Here is the link for a script that will flash both partitions with stock image
https://forum.xda-developers.com/pi...ol-deuces-bootloop-recovery-flashing-t3704761
derekr44 said:
Just got the XL on Friday. Loved it.
Unlocked the bootloader about 45 minutes ago. Wiped upon reboot (as normal). Google logo displayed with progress bar but the animation never stopped.
Downloaded the factory image from Nov. Ran the flash-all.bat from bootloader. No errors. Rebooted. Got a "Your device is corrupt" error. Phone stuck on the Google boot screen. Going into recovery just gives me a dead droid.
Attempting to flash the 8.1 developer preview results in the same issue. As of right now, nothing seems to boot at all. I've changed USB-C cables, since I've read about those causing issues, but still the same.
Click to expand...
Click to collapse
Something similar for me but with different reason for starting all this. When I did sideload of 8.1 all went well but my camera wasn't working (I saw the same thing in 8.1 DP) so I needed to go back to 8.0 but you can't sideload downgrade. I went to Google to get replacement sent and figure I might try to sort things out with this one in the meantime. I had to unlock to be able to just flash the factory 8.0 image so did that with both the unlock commands, then after that and after update I just got hung on the white screen with google logo. I was able to get back to bootloader with the power button + volume from off and from there I would get to the screen with the android and the exclamation point - I think you hold volume up and then power to go to sideload. Once there I just sideloaded 8.0 and all was good. I do still get the warning about corrupt whatever and have to hit power on reboot or fresh power up but I could redo the locks and whatnot and all seems fine now with camera working.
At the least I got camera back while waiting for replacement.
b4db0ys said:
just install the lastest fastboot and adb drivers from google and flash the factory image using commands or use any script .
after that everytime my phone got stuck on google logo .
how i fixed - Temporary boot twrp beta2 recovery using cmd (fastboot boot abc.img) "here abc refers to the correct name of the img file" and once booted into recovery go to advanced and select Partition A and reboot.
It will boot up just fine
Here is the link for a script that will flash both partitions with stock image
https://forum.xda-developers.com/pi...ol-deuces-bootloop-recovery-flashing-t3704761
Click to expand...
Click to collapse
This cleaned things up for me - still no camera in 8.1 but I got the replacement coming.
So I'm in the same boat as the OP but my bootloader is locked. Am I totally screwed? Is there a way to do any of this when the device won't show up in ADB?
Deuces said:
if the flash tool isn't working, use my script:
https://forum.xda-developers.com/pi...ol-deuces-bootloop-recovery-flashing-t3704761
Click to expand...
Click to collapse
can you just develop some scripts that working on locked bootloader ?
i have a bricked Pixel xl with locked bootloader and oem locked
If you can boot twrp but can't connect to a pc, a type c flash drive comes in handy. Load it with the needed ota, twrp installer zip and Just mount it and you're good to go.