can someone help?
i have the desire hd for some time, never really had an issue with it, totally love it
BUT
for some reason, there is no audio when using the dialler
not sure why, i've gone to audio settings on the phone and turned on the feedback (ie, audible touch tones), so not sure why this is till an issue
i'm using a stock standard desire hd, it hasnt been rooted or anything (its also from UK not vodafone au)
can anyone help me work out whats wrong?
no other issues, audio for other stuff is fine?
what could it be?
I've done a restart, i don't really want to restore to factory defaults unless there is no alternative, surely there is a way to troubleshoot first?
also, i have that latest firmware version (v2.2.1)
i did some more digging around
i can actually hear the dial tone, but its very faint, so it must be some volume thats not right, but when i went to the settings, there is all the volume levels at the top level at the moment.
after more googling, someone else had a problem like that, and they installed audio manager which gave the ability to access system volume, when i did that, i could see my system volume was very low, changed it to what i wanted and all is good
so if anyone has this type pf problem, thats what i did to sort myself out.
Related
hi there
after installing B&B4.1 lite (also with 4.0), i cant change phone speaker volume anymore during a phone call. the "switch" works fine, i see the volume indicator on the display changing according to how i press the button, but the volume itself doesnt change at all.
this occurs only during phone calls. i can perfectly set system or ringtone voulme using the same switch.
this is a bit troublesome in very loud or very quiet places, when either i cant hear anything or everyone else hears everything
i know that some others also have this problem when using B&B4.x ROMs. did anyone find a solution for this?
(with my original WM5 rom everything works perfectly.)
soardiac said:
hi there
after installing B&B4.1 (also with 4.0), i cant change phone speaker volume anymore during a phone call. the "switch" works fine, i see the volume indicator on the display changing according to how i press the button, but the volume itself doesnt change at all.
this occurs only during phone calls. i can perfectly set system or ringtone voulme using the same switch.
this is a bit troublesome in very loud or very quiet places, when either i cant hear anything or everyone else hears everything
i know that some others also have this problem when using B&B4.x ROMs. did anyone find a solution for this?
(with my original WM5 rom everything works perfectly.)
Click to expand...
Click to collapse
Hi There, the only way i could solve this issue was to install B&B4.1 Lite, that problem went away.
not sure what the correct fix for it is sorry.
thx. but that doesnt help me much, since i am already running 4.1 lite (sorry, forgot to mention that)
however, if you had this problem and it went away after installing 4.1 lite, i will investigate in that general direction
I got problem with B&B 4.0
sometime it automatically turn speaker ON, cann't turn it OFF again.
In HD Tweak, I set Volume Control\Acoustic settings to anything above the 100db limited (Default) - and audio gets boosted accordingly, but the microphone doesn't work and I'm unable to talk to anyone.. anybody have the same issue or any workaround?
I just want to boost the audio levels of the device overall. Btw, I also tried the audio booster within HDtweak and it doesn't seem to do anything. I also tried the audio boost cabs in the HDtweak site and no change.
I applied this tweak also and same thing. It even screwed up my bluetooth headset and i couldn't hear anything. When switching to speaker you only heard slight static. Only time i could hear the caller was the internal speaker but caller couldn't hear me. Had to go back to default for it function normally again. Not sure of any work around yet.
Hmm...I changed mine to "Normal" and had no problems with mic.
Guess I'll have to test further.
Did you happen to apply any other changes prior to HDtweak (such as: SRS WOW, or applying the AudioPara3.csv file floating around)? These may be conflicting with the change.
Nope, I didn't have anything else running or installed. Tried it on both mine and my fiance's TP2, with the same results.
Right now I'm using that tweaked AudioPara3.csv, but I can't really tell a difference if there's a difference, maybe a slight volume increase.
koopiskeva said:
In HD Tweak, I set Volume Control\Acoustic settings to anything above the 100db limited (Default) - and audio gets boosted accordingly, but the microphone doesn't work and I'm unable to talk to anyone.. anybody have the same issue or any workaround?
I just want to boost the audio levels of the device overall. Btw, I also tried the audio booster within HDtweak and it doesn't seem to do anything. I also tried the audio boost cabs in the HDtweak site and no change.
Click to expand...
Click to collapse
koopiskeva said:
Nope, I didn't have anything else running or installed. Tried it on both mine and my fiance's TP2, with the same results.
Right now I'm using that tweaked AudioPara3.csv, but I can't really tell a difference if there's a difference, maybe a slight volume increase.
Click to expand...
Click to collapse
Not 100% sure of what you've done, but suggest you revert everything back to stock (HDtweak all audio related changes to default settings, remove 'audio boost cabs' and the AudioPara3.csv file), and soft-reset.
Test that mic is working properly, then try HDtweak -> only the acoustic settings to "Normal".
Soft-reset and check for mic functionality.
Sorry about that.
I meant previously that I had reset all settings back to stock, and was just running the AudioPara3.csv tweak (which didn't seem to do much or anything at all).
I reverted back to stock again now, and am just running HD Tweak\Acoustic Settings\Normal. I tested the mic with a call and it does indeed work.
I can't really tell if the volume is louder though, I think it is, but it's just hard to compare. I had set it to Maximal before and could definitely tell a huge difference, so I guess that's what I'm aiming for, or at least intermediate, but for now the Normal setting will have to do. Thanks sir.
I have installed & run HDtweak on my TP2. I hear no noticeable audio level increase. I have set all volume tweaks to max. Is a reset needed to "apply" the tweaks?
I have downloaded and tried the audiopara3 full & light boost and it made my device to where I couldn't hear the other caller at all. But it did make the ringtone louder.
I un-installed and know its back to normal.
I am having the same problem with HD tweak.
The mic goes off each time i increase the volume in HD tweak.
Still waiting for a solution and searching daily for a descent tweak, (Pro2 tweak maybe)?
Sorry to bump this old thread, but I was wondering if this HDTweak problem was ever solved?
The only way I can get my unbranded TP2's music players (WMP, Audiomanager, Coreplayer and Pocket Player) working at a comparable volume to my iPod Touch is by using HDTweak's volume tweaks, but I can't hear anything when making calls through my handset or speakerphone.
I've already tried multiple extusb adaptors and various headphones, and the sound is still considerably more muffled and not as loud as my iPod Touch.
I'd appreciate any help on this. Thanks!
Howdy all,
The other day my other halfs' Wildfires' speaker decided to stop working for no reason. Can still make phonecalls etc, and the headphones work, but its like its stuck on silent all the time!
Read somewhere it could be to do with a recently installed app, so factory reset it but no change. Also saw it could be something to do with something in the headphone socket not clicking back properly when they are removed, but she's never used the headphones, but tried that anyway, still with no luck.
Never been flashed or anything, totally standard.
Any ideas?
Many thanks, Tarq
Tarquin76 said:
Howdy all,
The other day my other halfs' Wildfires' speaker decided to stop working for no reason. Can still make phonecalls etc, and the headphones work, but its like its stuck on silent all the time!
Click to expand...
Click to collapse
Perhaps it is me, but what do you mean by this?
1. You cannot go out of silent mode in terms of "set phone volume to vibrate or noice" by using the volume buttons. In that case:
- make sure that your volume buttons work (by using them to regulate audio of, for example, your radio).
- try if you can solve the problem by going into "options of your phone - sound".
If they do not work, try to flash a ruu. If still not solved, I'm afraid you should open your phone to see if the connectors of the volume buttons are still in place (i've had this with my previous phone). But perhaps wait for other advice before doing so
2. You can get out of the silent ringer mode, but still the phone doesnt make any noice. My best guess then is that it related to software in the system folder which controls your device at the system level, or perhaps with the kernel?
I do not know if the the systemfolder is restored when you do a factory reset..
It couldn't do harm if you flash a ruu in my opinion. The all software related issues are ruled out then.
It can't be the hardware as you can still hear people talking to you while phoning without headset. Nor can it be a messed up jack-in, as all the sound should be transfered to the headphone, and it shouldn't be possible to call and here people without headset.
To summerize: I think it is still software, and that it should be possible to solve it by flashing a kernel or restoring bynusing a RUU.
Erwin
I've had my DHD since they came out last November and I've had no real issues with it in all that time. However, I've now got a hugely annoying issue with sound where all sound, ringtones, music etc, comes through distorted at max volume where before it was clear. The obvious suggestion is to turn the volume down but even two steps down from max. volume it still happens depending on the sound coming from the speaker. I don't know how else to describe it except perhaps tearing and that doesn't sound very accurate to what is happening.
I don't remember when this first started happening but I'm pretty sure it was a few months ago and I was using a Sense based ROM at the time. The issue got so bad that instead of playing distorted sound in Sense it would just cut out and all sound would stop for what seemed like two or three minutes. Switching to CM7 has prevented it cutting out but the distortion is still there so I don't think it's related to a specific ROM unless it's a volume boost that was done over all ROM builds. As anyone who owns a DHD will know the audio has always been a little on the quiet sound but the level I have the volume at now is below what I'm comfortable with.
Can anyone offer a suggestion on how to fix this audio issue? It's almost to the point now where I'm thinking of going back to stock and sending it in for repairs. Don't make me do that.. you know it's not a fun process.
I'm only replying to this in case anyone has similar issues so they can see my resolution. Unfortunately it's gotten worse, to the point that I lost all sound on all ROMs bar a few squeaks from the speaker. The in-call speaker worked fine and I could make calls with no issue but no notifications, alerts, alarms etc would sound on the external speaker.
I flashed back to stock Gingerbread and I've sent my phone off to HTC, via T-Mobile UK, to be repaired. I'm also hoping they fix the misaligned camera issue too. I'm a little worried because despite trying I could not get S-ON back before I took it in but it's using stock bootloader and an HTC RUU ROM. Anyway, I'm basically saying that it's a bad sign and will have to go in for repairs. Hopefully this will save anyone from wondering in the future if they get the same sort of issue.
I'm having the same problem.. I think.. if you are talking about the speaker that you make the phonecalls with.. not the "external" speaker.. that works fine..
it has a crackling sound with mine.
Sounds like the external speaker is busted. You already send it to repair, probably that's the only solutions.
Right, here’s the situation, I replaced the screen on my HTC Desire HD a few days ago and literally the first boot since there was a Wifi notification of a ROM update also, so I did it... (Orange UK Software number 3.13.61.5) anyway, since replacing the screen / updating the ROM, the Microphone has gone ridiculously quiet when making or receiving a phone call and if I open the Voice recorder, I can barely hear my recorded voice back, and the only way people can hear me when I call them is if they put it on loudspeaker and still put the phone to their ear...
Ok so initially I thought that this might be a hardware issue as I have been in the phone, however, given the fact that I can hear some playback via voice recorder, this means that the Microphone is working..?
So after a bit more investigation, I found that if I remove the bottom panel that covers the SD Card and Sim Card slots, then Voice recorder works perfectly (but my signal drops off completely so I can't test a phone call... *Are the 2 little gold contacts to do with the antenna?*) So I have come to the conclusion that it must be software? As obviously when these 2 little gold contacts make connection with the phone again, ye it enables me to make a phone call, but wrecks the microphone...
On a side note, I have checked the little Microphone hole on that bottom panel and shoved a pin through it and it’s as clean as a whistle so it can't be a blockage of any sort...
So something is happening when the bottom panel is on the phone, those 2 gold contacts tell the phone to do something? Provide an antenna for it but in doing so almost muting the microphone at the same time..?
Any ideas on how I can fix this or where shall I start? Could this still be a hardware issue? Shall I strip the phone down again and pay special attention to a specific part? :S
Please Help!?
Thanks in advance!
Adam.
which rom are you using? if that's a stock rom, it is highly recommended that you try one of the custom ones from development section (sense 3.5 roms)
Yes, its a stock ROM that was pushed OTA... It's a friends phone, I have a HD2 so I'm very familiar with flashing roms etc... but I'm going through the custom roms section and I can't seem to be able to find a good guide as a starting point..? I see a lot about Downgrading? and S-Off..? (Does that mean Signature Off?)
Thanks very much for the reply though!
Ok... I've flashed a custom ROM now, and a different radio '[ROM] Android Revolution HD 7.0.3 | High Quality & Performance | O/C | Legendary' is the rom I used...
Exactly the same... It's as if the microphone level is right down when the phone has signal/network as if I shout the voice recorder picks stuff up then...
Is there an App I can use to tweak the gain or something on the Mic levels?
I've had the phone in bits again and cleaned out everywhere, theres no dust build up or anything of the sort so I'm sure its not hardware related... but then if the ROM is completely different then it can't be software either can it..? :S
Cheers, Adam.
API182 said:
Ok... I've flashed a custom ROM now, and a different radio '[ROM] Android Revolution HD 7.0.3 | High Quality & Performance | O/C | Legendary' is the rom I used...
Exactly the same... It's as if the microphone level is right down when the phone has signal/network as if I shout the voice recorder picks stuff up then...
Is there an App I can use to tweak the gain or something on the Mic levels?
I've had the phone in bits again and cleaned out everywhere, theres no dust build up or anything of the sort so I'm sure its not hardware related... but then if the ROM is completely different then it can't be software either can it..? :S
Cheers, Adam.
Click to expand...
Click to collapse
I'm no expert on electricity and all that but can it be possible that the power input onto the mic is being too low so that it is not functioning properly due to a newer screen sucking up a higher power? but then you mentioned that by removing those plates, it works fine...
I couldn't come across a fix as it seems that not many people had this problem so it seems that it is more of a hardware problem but i'll post asap i find something
EDIT: maybe this
Thanks for the reply! I can't understand what it could be... I have figured out though that if I hold the phone horizontally in front of my mouth and talk then it works... so I'm completely stumped as to what it could be...
Is there no way I can edit some sensitivity figure somewhere? :S
Cheers, Adam.
No mic issue continued
API182 said:
Thanks for the reply! I can't understand what it could be... I have figured out though that if I hold the phone horizontally in front of my mouth and talk then it works... so I'm completely stumped as to what it could be...
Is there no way I can edit some sensitivity figure somewhere? :S
Cheers, Adam.
Click to expand...
Click to collapse
Hi All
I have had the same issue with no mic imput when calling someone on a HTC Desire 500 phone.
My problem started when I paired a plantronics bluetooth hands free device to my phone and started to use it.
While using the PK100 device all was perfect and no issues, but when I turned off the hands free device I now have the same issue no one can her me through the phone mic, no sound at all. I believe this issue is both software and hardware the software needs to switch the hardware (mic) on and off
It is as if the mic has been switched off by the (PK100) bluetooth hands free but the software on the phone is not re-enabling the phone mic so now I am in a situation where i can only use my phone via a diferent mic headphones or PK100 hands free.
I can also add that while in a call I have the option to switch from the hands free on the phone, or to use the phone or to use the PK100 from an in call option all works ok but the mic on the phone will not reactivate. this seems to be an issue with the software not activating the mic.
If anyone has any idea I would like to here...