Troubles with Installing OTA 1.72.405.3 - Desire HD Q&A, Help & Troubleshooting

OK. I have read a few things but am still lost
I have an HD that will not upgrade to OTA 1.72.405.3 it crashes at about 20%
I have to remove battery and restart
Now can someone help me how to get the upgrade running as i installed superuser just to remove some of the apps like amazon facebook ect
I have reset my phone to factory settings and formatted the sd card,
If someone could give me a easy guide..as I dont want to brick it
Thank you

Similar issue here,
i've used su a way ago to remove some pre-installed apps like amazon MP3, facebook, etc. Then played a while with DHD Revolution ROM, then went back to the stock rom (just restored it from a backup). Now i can't update to 1.72: it crashes at about 20%. Tried to do a factory reset, still the same. It says: the md5's for /system/app/facebook.apk don't match.
Does anyone have any ideas how to get the phone completely back to a stock state?

This is what I got from HTC
Thank you for contacting us. In regards to fota update I can help you with that. We advise you to check followings ; If the update fails for some reason this is something the customers can try. The OTA update is downloaded to the phone and is placed in a folder called Download on the SD card. Using a file explorer, browse to this folder and you should find the downloaded update. The file should have an obvious name, beginning with OTA_x_Froyo_....... Tghis file will be a zip file. Rename the file to update.zip. In general, you do not need to put in .zip, as it will already be flagged as a zip file, and doing so would end up with a file called update.zip.zip, which will not work. To run these update follow these instructions: 1. Take the battery out and put it back in without starting the phone. 2. Press and hold the Volume Down button. 3. While still holding Volume Down, press and release the Power button. 4. Keep pressing Volume Down until you see 3 skateboarding androids on the bottom of the screen. release the Volume Down button and wait a few seconds 5. Press Volume Down to navigate to Recovery in the menu and press the Power button to select it. 6. When you see a triangle with a exclamation mark !, press Volume Up and Power at the same time. 7. You should now see blue text and the option to Apply sdcard:update.zip 8. Navigate to it using the Volume keys, and select it using the Power button. The phone will hopefully now install the update and after its done reboot the phone
And this is what happened when I ran it..
I have reinstalled the amazon app.
E/ can't find caceh/recovery/command
If I download the update via settings/about phone/system software updates it says E/ can't find checeh/recovery/command
If i press volume up and the powwer button it then says
Finding update package ... Opening update package... Verifying update package.. Installing update... Copying fotaBoot to /data system for customize reload... Verifying current system... assert failed: apply_patch_check("/system/app/amazonmp3.apk". "ff8ad0f610cfdd4a63567bd823d3659421aa44", "13a3ee8a28676e263a4d4fa474e28b0f94b9abb4") E:Error in /sdcard/download/OTA_Ace_HTC_WWE_1_72_405_3_R2-1_32_405_6_release_1632939lowfu0y78jktpp2.zip (status 7) Installation aborted.
Anyone had this same problem?? Please help. Is there a way to view E/caceh/recovery/command
Thank you

Update fails if you remove any system apps.
You can still get back to stock by following this guide.
If you update to 1.72 using that method you will loose root forever though.
You can do it this way if you want 1.72 with root.
Oh yeah don't use the root package from that thread. It will keep force closing. Use this one instead.
Sent from my performance enhanced Desire HD.

i removed my system appd.
So now i get the status 7 message as well! How can i get the apps back? :/

update.zip
Can anyone upload the update.zip file here?

Related

Is the 2.2 OTA upgrade being held back at the moment?

Hi,
I was offered the froyo upgrade via the OTA notification during the weekend, but decided to wait to see what issues people would have with the update.
Today I decided to install the update, but I can no longer get it - "Your phone is up to date".
All version numbers are the same as before, ie firmware 2.1-update1, build 1.21.405.2 and so on.
With my old Hero, I held back the 2.1 upgrade for several days, but always could check for the upgrade and see it as available for download.
Has the OTA upgrade been temporarily been held back, or am I missing something here?
./gre0
You can always grab the zip file off HTC servers and update it manually (that's what I did on Sunday, not having WiFi and limited 3G traffic).
ZIP File
Hi I've looked at the HTC site, could u give me a link to the zip file? PLEASE!!!!!!
gre0 said:
Hi,
I was offered the froyo upgrade via the OTA notification during the weekend, but decided to wait to see what issues people would have with the update.
Today I decided to install the update, but I can no longer get it - "Your phone is up to date".
All version numbers are the same as before, ie firmware 2.1-update1, build 1.21.405.2 and so on.
With my old Hero, I held back the 2.1 upgrade for several days, but always could check for the upgrade and see it as available for download.
Has the OTA upgrade been temporarily been held back, or am I missing something here?
Click to expand...
Click to collapse
Oh, well. Now it's available again.
How do you update the zip file manually?
1. Grab : http://liveimage.htc.com/OTA_Bravo_Froyo_HTC_WWE_2.09.405.8-1.21.405.2_release4dua3bcrut4wrv30.zip
2. Copy the file to your microSD card and name it update.zip (newb warning: not update.zip.zip)
3. Power off your phone.
4. Hold down the VOLUME DOWN button and power it back on.
5. The phone will now search for files like PB00IMG.zip, etc. This is normal. Scroll down to recovery and press the POWER button.
6. When you see the /!\ symbol, press the POWER button and the Volume Up button at the same time. You should be presented with a menu and one of the options should be "Apply sdcard:update.zip".
7. Use the trackball to navigate to "apply sdcard:update.zip" and select it.
8. When you see "Install from sdcard complete", select "reboot system now".
thed0g said:
1. Grab : http://liveimage.htc.com/OTA_Bravo_Froyo_HTC_WWE_2.09.405.8-1.21.405.2_release4dua3bcrut4wrv30.zip
2. Copy the file to your microSD card and name it update.zip (newb warning: not update.zip.zip)
3. Power off your phone.
4. Hold down the VOLUME DOWN button and power it back on.
5. The phone will now search for files like PB00IMG.zip, etc. This is normal. Scroll down to recovery and press the POWER button.
6. When you see the /!\ symbol, press the POWER button and the Volume Up button at the same time. You should be presented with a menu and one of the options should be "Apply sdcard:update.zip".
7. Use the trackball to navigate to "apply sdcard:update.zip" and select it.
8. When you see "Install from sdcard complete", select "reboot system now".
Click to expand...
Click to collapse
is this method exactly the same as downloading direct from your phone? So will we still continue to recieve ota updates? And does it keep your data?
yes it will.
sweet doing it now. came up with Can't open /cache/recovery/command, but everything else seems to be doing alright
Can anybody help me with a question, I rooted my voda locked desire and flashed it with a rooted official froyo rom from this site, I wanted to unroot so as to get any further ota updates as normal but have since found it is easer said than done with a 0.80 bootloader, so my question is would this do the trick for me ? Thanks in advance
thed0g said:
1. Grab :... not allowed to post someones links ;/
2. Copy the file to your microSD card and name it update.zip (newb warning: not update.zip.zip)
3. Power off your phone.
4. Hold down the VOLUME DOWN button and power it back on.
5. The phone will now search for files like PB00IMG.zip, etc. This is normal. Scroll down to recovery and press the POWER button.
6. When you see the /!\ symbol, press the POWER button and the Volume Up button at the same time. You should be presented with a menu and one of the options should be "Apply sdcard:update.zip".
7. Use the trackball to navigate to "apply sdcard:update.zip" and select it.
8. When you see "Install from sdcard complete", select "reboot system now".
Click to expand...
Click to collapse
hi, so Ive just tried to do this (voda locked desire) and found that i could not fininsh these (went up to step 7) as installation aborted
here is what it actually says " E; Error in /sdcard/update.xip
(status 7)
any advice?!
will try again, and I;ll update this if I figure it out
should i try to download the package aginb to see if this one was damaged somehow during the download?!
Thanks!
Your branded so you need to try again with a goldcard
http://forum.xda-developers.com/showthread.php?t=696189
does this work with 0.80 bootloader
thed0g said:
1. Grab : liveimage.htc.com/OTA_Bravo_Froyo_HTC_WWE_2.09.405.8-1.21.405.2_release4dua3bcrut4wrv30.zip
2. Copy the file to your microSD card and name it update.zip (newb warning: not update.zip.zip)
3. Power off your phone.
4. Hold down the VOLUME DOWN button and power it back on.
5. The phone will now search for files like PB00IMG.zip, etc. This is normal. Scroll down to recovery and press the POWER button.
6. When you see the /!\ symbol, press the POWER button and the Volume Up button at the same time. You should be presented with a menu and one of the options should be "Apply sdcard:update.zip".
7. Use the trackball to navigate to "apply sdcard:update.zip" and select it.
8. When you see "Install from sdcard complete", select "reboot system now".
Click to expand...
Click to collapse
Can anybody help me with a question, I rooted my voda locked desire and flashed it with a rooted official froyo rom from this site, I wanted to unroot so as to get any further ota updates as normal but have since found it is easer said than done with a 0.80 bootloader, so my question is would this do the trick for me ? Thanks in advance
DanTehManUK said:
Your branded so you need to try again with a goldcard
now that I have the goldcard done, I tried to install Update.zip manually, howevery I still get the same error!
any advice?! I aslo tried to dsebrand my phone using RUU files, however the build numbers are lower then the ones on my phone therefore they won't let me update my phone to any unbranded software!
again, any ideas?!
thanks in advance!!
Click to expand...
Click to collapse
Spoke to T-Mobile (via their twitter service) and got this back
TmobileUKhelp: Hi, we will be serving up some frozen yogurt for the HTC Desire in September
OTA Update 2.2 FR
Hi,
On my Desire I cannot get the OTA (version 1.21.405.2 for the moment). It tells me that the phone has the latest update.
When I try to open the french support page on HTC.com and choose the Desire in the list I get the message that this page is not available.
The link to download the file directly from HTC site is broken as well.
Does anyone have a link to get this file from another server?
Thanks
Thomas
goofy584 said:
Hi,
On my Desire I cannot get the OTA (version 1.21.405.2 for the moment). It tells me that the phone has the latest update.
When I try to open the french support page on HTC.com and choose the Desire in the list I get the message that this page is not available.
The link to download the file directly from HTC site is broken as well.
Does anyone have a link to get this file from another server?
Thanks
Thomas
Click to expand...
Click to collapse
hi, sorry I dont know how to help with your problem, but Iam uploading the file right now so I'll send it to you via PM
!PANDA said:
DanTehManUK said:
Your branded so you need to try again with a goldcard
now that I have the goldcard done, I tried to install Update.zip manually, howevery I still get the same error!
any advice?! I aslo tried to dsebrand my phone using RUU files, however the build numbers are lower then the ones on my phone therefore they won't let me update my phone to any unbranded software!
again, any ideas?!
thanks in advance!!
Click to expand...
Click to collapse
try this
Debranding procedure:
1.Download the generic unbranded software here: http://androidfiledepot.com/Storage/Desire/Stock%20Roms/RUU_Bravo_HTC_Europe_1.15.405.3_Radio_32.30.00.28U_4.05.00.11_release_121865.exe
2.Run the software downloaded in step 1.
(Windows may prompt you to reboot when the phone switches to bootloader mode. If so you'll need to reboot and run the software again.)
3.This will flash your Desire with a generic HTC version of the OS.
4.Enjoy!
5.If you used the SD card that came with the phone, you can copy your backup back onto the SD card next time you connect your phone in "disk drive" mode.
Click to expand...
Click to collapse

Sprint FD02 to FG01 OTA Update File

My phone is [was] rooted. It received the update and I didn't want to accept it but that popup kept pissing me off asking if I wanted to "install now or later" every 5 minutes. I was determined to stop it. I found the update waiting in the /cache folder. I copy/pasted it to my internal documents folder. Then I deleted it from /cache. After a reboot the nagging pop up stopped. Next I did a full copy/paste of all the system app .APK's from /system/app. If local search is one of them, I have it - though I'm not sure what local search is or how to tell what it was because I never used it. Is local search the google search bar that sits at the top of the home screen? I still have that installed.
After doing a full backup of my phone in CWM I installed the update from the .zip file in CWM. It took 7-10 minutes but then completed and I rebooted. The update breaks root. I haven't rerooted yet but attempts to return to the recovery mode (holding power + up + down volume buttons, then choosing "recovery mode" with volume buttons and selecting with power button) results in an icon of an android with his belly open and a red triangle icon with an exclamation point in it. My phone does boot normally though; it's just attempting to go to CWM recovery mode that gives me issue, again because this update breaks root.
**Update** I re-flashed twrp-toroplus-2.1.2-SPRINT.img and got into recovery mode immediately afterwards (without rebooting after the flash). From there I "installed from .zip" the CWM-SuperSU-v0.92.zip file. I'm now rooted once again on the new FG01 update.
I've linked to the update file I pulled from /cache prior to updating - though if you're not rooted I'm not sure how you'll be able to install this.
http://justbeamit.com/600fc

[Q] cant install root file from internal storage?

Hey guys im trying to root my device so i can install some lightweight custom roms. Ive been following this guide i found online
http://androidcritics.com/how-to-root-and-install-clockworkmod-recovery-on-galaxy-s3-i747/
I basically did this
Installing Clockwork Recovery Mod
Find the recovery image file which is clockworkmod.tar
On your Samsung Galaxy S3 I747, press and hold down the volume down, power, and home buttons
Once your at the warning screen, press volume up to accept
Launch the Odin program from your computer
In Odin, find the PDA tab and click it
Find the clockworkmod.tar.md5 file in the unzipped recovery image file
Press start to begin flashing the recovery mod
BE PATIENT! and wait until your device reboots
Once your device has fully rebooted, you can start installing root
It loaded on the phone fine. I then did this
Installing Root
Transfer the root.zip file onto your phone from your computer
Make sure you connect your s3 to your computer and find the root zip file and put it in your downloads folder.
Enter clockwork recover mod by holding down the volume up, power, and home buttons
Navigate by using the volume buttons to Install Zip > Choose Zip from Internal SD card > Navigate to the downloads folder> Select
Be Patient! and wait until your device is finished
Once the process is finished, you can select Reboot
Once your device has rebooted, launch the Google Play Store app
Search “SuperuserSU” and select the first app that shows in the search results
Install this app
Once it has finished installing, your done!
The only problem is I cant navigate to the option "install zip from internal sd card" I simply dont have though's options here is what I have when hold volume up reset and home
"reboot system now
apply update from ADB
apply update from external storage (which i dont have)
wipe data/factory reset
wipe cache partition
apply update from cache
When i hit apply update from ADB it says "now send the package you want to apply to the device with "adb sideload <filename>"...
Im wondering if the original flash didnt go thru? Why dont I have the options that I should?
Any help would mean the world trying to get this puppy up asap!
regards,
Eddy
eddyg519 said:
Hey guys im trying to root my device so i can install some lightweight custom roms. Ive been following this guide i found online
http://androidcritics.com/how-to-root-and-install-clockworkmod-recovery-on-galaxy-s3-i747/
I basically did this
Installing Clockwork Recovery Mod
Find the recovery image file which is clockworkmod.tar
On your Samsung Galaxy S3 I747, press and hold down the volume down, power, and home buttons
Once your at the warning screen, press volume up to accept
Launch the Odin program from your computer
In Odin, find the PDA tab and click it
Find the clockworkmod.tar.md5 file in the unzipped recovery image file
Press start to begin flashing the recovery mod
BE PATIENT! and wait until your device reboots
Once your device has fully rebooted, you can start installing root
It loaded on the phone fine. I then did this
Installing Root
Transfer the root.zip file onto your phone from your computer
Make sure you connect your s3 to your computer and find the root zip file and put it in your downloads folder.
Enter clockwork recover mod by holding down the volume up, power, and home buttons
Navigate by using the volume buttons to Install Zip > Choose Zip from Internal SD card > Navigate to the downloads folder> Select
Be Patient! and wait until your device is finished
Once the process is finished, you can select Reboot
Once your device has rebooted, launch the Google Play Store app
Search “SuperuserSU” and select the first app that shows in the search results
Install this app
Once it has finished installing, your done!
The only problem is I cant navigate to the option "install zip from internal sd card" I simply dont have though's options here is what I have when hold volume up reset and home
"reboot system now
apply update from ADB
apply update from external storage (which i dont have)
wipe data/factory reset
wipe cache partition
apply update from cache
When i hit apply update from ADB it says "now send the package you want to apply to the device with "adb sideload <filename>"...
Im wondering if the original flash didnt go thru? Why dont I have the options that I should?
Any help would mean the world trying to get this puppy up asap!
regards,
Eddy
Click to expand...
Click to collapse
Sounds like the root method you are using is just way to complicated. Follow this one here http://forum.xda-developers.com/showthread.php?t=1739426 it has prerooted firmwares that you just install with odin and you are done (cwm included). Just make sure you grab the right firmware for your carrier.
If I have helped you out, slap that thanks button.
aeppacher said:
Sounds like the root method you are using is just way to complicated. Follow this one here http://forum.xda-developers.com/showthread.php?t=1739426 it has prerooted firmwares that you just install with odin and you are done (cwm included). Just make sure you grab the right firmware for your carrier.
If I have helped you out, slap that thanks button.
Click to expand...
Click to collapse
Beauty I think its flashing the rogers rom to my phone from there Im good to load other roms using this odin tool? (or is it rom manager?)
also what is this clockwork mod ? I might as well go into play store and get both rom manager and clockwork?
- eddy
So After I flashed the new rom to my phone i left it plugged in and it restarted. Android loader popped on and now it says android is upgrading... starting apps. Its been like this for over a half an hour... what do i do??? helpppp dont really want to reset it but it is bricked? or do i have to reload ?
update:
held the restart button down it restarted bit is still stuck on starting apps.
update two:
held vol down home and reset tried to reload the rogers rom onto the phone and now it stops at samsung load screen. Do i have to reload the carrier that came with the phone? I cant quite remember what the original carrier was.
UPDATE THREE:
I as able to boot back into the phone but...nothing changed? i ended up wiping the phones data in settings because its too full as it is. I downloaded root checker and it said access was denied ? That makes its not rooted after all... I followed the directions seems that they didnt take? Any clues?
eddy
eddyg519 said:
So After I flashed the new rom to my phone i left it plugged in and it restarted. Android loader popped on and now it says android is upgrading... starting apps. Its been like this for over a half an hour... what do i do??? helpppp dont really want to reset it but it is bricked? or do i have to reload ?
update:
held the restart button down it restarted bit is still stuck on starting apps.
update two:
held vol down home and reset tried to reload the rogers rom onto the phone and now it stops at samsung load screen. Do i have to reload the carrier that came with the phone? I cant quite remember what the original carrier was.
UPDATE THREE:
I as able to boot back into the phone but...nothing changed? i ended up wiping the phones data in settings because its too full as it is. I downloaded root checker and it said access was denied ? That makes its not rooted after all... I followed the directions seems that they didnt take? Any clues?
eddy
Click to expand...
Click to collapse
Okay buddy looks like you need to learn some basic android 101
You are definitely not ready to root or do anything til you learn this stuff...
Okay, so first is recoveries. Basically recoveries are a bit of software that let's you flash ROMs, kernels, and whatever else to your phone. When you hold volume up and power when your phone is off, you boot to recovery. Now basically recoveries are necessary because when you are flashing a new ROM it essentially deletes the android system from your phone first so this is a way of your phone still working between flashes.
Clockworkmod is a custom recovery with a lot of features meant for flashing ROMs. There are competitors such as TWRP (team win recovery project) but clockworkmod is a great starter. Use videos or tutorials on how to use it before you flash your first ROM. I can not stress how often you need to read read and read some more.
Okay so rooting your phone. Basically there is a "root" directory of your phone. Its where all the system files are stored and it let's you do a lot of stuff, but it also means you can screw a lot of stuff up to (like really screw it up). On default you are locked out of here by the maker of your phone for various reasons. Rooting means that someone found an exploit to gain access to this folder. Usually what you then do is you find a way to inject superuser (a little app that gives root access to other apps later on). You use Odin in this case to install a stock Samsung rom (with superuser already put in the root directory of that modified ROM its installing) essentially this means you have root. Root allows you to install recoveries like clockworkmod (which you need to flash ROMs later.
Okay so that was my quick run through. At your point you need to go to YouTube and Google how to root the sgs3 and hopefully they should have one for your specific carrier. The process should be the same minus the files you flash. Essentially you should be looking for stock ROM (for your specific device) with superuser or supersu already installed. Then you should be finding a way to install clockworkmod once you have root. (You may be able to find a file or tutorial that does this in one go). I cannot emphasise enough about reading. You wouldn't be here had you read first and in the flashing business, if you don't want a sgs3 paper weight you should read first.
Oh and ROMmanager from the marketplace installs clockworkmod for you (ONCE YOU HAVE ROOT) its simple. Just download it from the play story. Click flash recovery. It will load a bit and your done. Then you can reboot into it. ROM manager (the paid version is unnecessary) it just adds extra features you don't yet need. Look at it once you have flashed your first few ROMs.
Best of luck. Let me know and slap that thanks button. I wrote this on my phone.
READ READ READ
eddyg519 said:
Hey guys im trying to root my device so i can install some lightweight custom roms. Ive been following this guide i found online
http://androidcritics.com/how-to-root-and-install-clockworkmod-recovery-on-galaxy-s3-i747/
I basically did this
Installing Clockwork Recovery Mod
Find the recovery image file which is clockworkmod.tar
On your Samsung Galaxy S3 I747, press and hold down the volume down, power, and home buttons
Once your at the warning screen, press volume up to accept
Launch the Odin program from your computer
In Odin, find the PDA tab and click it
Find the clockworkmod.tar.md5 file in the unzipped recovery image file
Press start to begin flashing the recovery mod
BE PATIENT! and wait until your device reboots
Once your device has fully rebooted, you can start installing root
It loaded on the phone fine. I then did this
Installing Root
Transfer the root.zip file onto your phone from your computer
Make sure you connect your s3 to your computer and find the root zip file and put it in your downloads folder.
Enter clockwork recover mod by holding down the volume up, power, and home buttons
Navigate by using the volume buttons to Install Zip > Choose Zip from Internal SD card > Navigate to the downloads folder> Select
Be Patient! and wait until your device is finished
Once the process is finished, you can select Reboot
Once your device has rebooted, launch the Google Play Store app
Search “SuperuserSU” and select the first app that shows in the search results
Install this app
Once it has finished installing, your done!
The only problem is I cant navigate to the option "install zip from internal sd card" I simply dont have though's options here is what I have when hold volume up reset and home
"reboot system now
apply update from ADB
apply update from external storage (which i dont have)
wipe data/factory reset
wipe cache partition
apply update from cache
When i hit apply update from ADB it says "now send the package you want to apply to the device with "adb sideload <filename>"...
Im wondering if the original flash didnt go thru? Why dont I have the options that I should?
Any help would mean the world trying to get this puppy up asap!
regards,
Eddy
Click to expand...
Click to collapse
Hi eddy,
It sounds like you didn't get CWM to stick after your flash with ODIN. You need to uncheck the reboot option in odin and then after the flash is done pull the battery and go directly into CWM loader by booting with the volume up + power + home button method. This will give you cwm rather than the stock loader you seem to be trying to use. You're almost there!
sxorpyon said:
Hi eddy,
It sounds like you didn't get CWM to stick after your flash with ODIN. You need to uncheck the reboot option in odin and then after the flash is done pull the battery and go directly into CWM loader by booting with the volume up + power + home button method. This will give you cwm rather than the stock loader you seem to be trying to use. You're almost there!
Click to expand...
Click to collapse
He also said root wasn't sticking. He needs that before he can cwm to stick
aeppacher said:
He also said root wasn't sticking. He needs that before he can cwm to stick
Click to expand...
Click to collapse
I think he can't install the superuser.zip from cwm after boot because he's allowing the stock rom to overwrite his cwm flash ... he's gotta pull his battery after the odin flash to get root in. That's what worked for me. once he's got root he can use rom manager to upgrade to cwm 6.x
sxorpyon said:
I think he can't install the superuser.zip from cwm after boot because he's allowing the stock rom to overwrite his cwm flash ... he's gotta pull his battery after the odin flash to get root in. That's what worked for me. once he's got root he can use rom manager to upgrade to cwm 6.x
Click to expand...
Click to collapse
He shouldn't need cwm to install. If flashes a firmware with root already injected he can then just use rom manager to install clockworkmod for the first time since rom manager just needs root which he will have. You can root and keep the stock recovery on at the same time
I think his biggest issue is root not sticking. Til he does that cwm wont install

[Q] Bricked Nubia N7 Mini?

Hello everyone, i'm new to this forum and i hope anyone can help me. I recently received a Nubia z7 mini. It's an awesome phone! However just tonight i tried to upgrade using the OTA option. When my phone rebooted into the Nubia v1.0 recovery it kept displaying this message:
E: footer error
E: signature verification failure
operation aborted
The phone then rebooted.
I then searched for other ways of updating and this is where i went wrong. I downloaded the latest official update, placed it on my phones external SD and tried to install using flashify. Since the search for zip file option didn't load properly i clicked on 'boot image' (really didn't know what i was doing there). It then loaded the zip file, and asked for my okay. I then rebooted and the phone didn't start anymore, it's just stuck at the Nubia logo. I can get it into recovery mode (Nubia recovery 1.0) but if i try to flash a new rom i keep getting the above errors (footer error and signature verification error).
My phone is not being recognized by windows right now so i cant flash with odin.
Is there a way to fix this phone ?
Many thanks in advance!
Afross said:
Hello everyone, i'm new to this forum and i hope anyone can help me. I recently received a Nubia z7 mini. It's an awesome phone! However just tonight i tried to upgrade using the OTA option. When my phone rebooted into the Nubia v1.0 recovery it kept displaying this message:
E: footer error
E: signature verification failure
operation aborted
The phone then rebooted.
I then searched for other ways of updating and this is where i went wrong. I downloaded the latest official update, placed it on my phones external SD and tried to install using flashify. Since the search for zip file option didn't load properly i clicked on 'boot image' (really didn't know what i was doing there). It then loaded the zip file, and asked for my okay. I then rebooted and the phone didn't start anymore, it's just stuck at the Nubia logo. I can get it into recovery mode (Nubia recovery 1.0) but if i try to flash a new rom i keep getting the above errors (footer error and signature verification error).
My phone is not being recognized by windows right now so i cant flash with odin.
Is there a way to fix this phone ?
Many thanks in advance!
Click to expand...
Click to collapse
Well, I can inform that you do need a custom recovery on that phone in order to flash a custom ROM... Or it wont work. But i dont have that phone, you can try this.
1.copy ****.zip to root folder of the phone SD card (no need to unzip).
2.Turn off the phone, then keep pressing power button and volume+ button until the robot icon appear, then press power button again and it will show as below
3.Press the volume- to move up and down to choose“wipe data/factory reset”, then press volume+ button to confirm.
4.Choose “yes—delete all user data”, then press volume+ button to enter the page as below.
5.It will enter below page after finishing delete all user data.
6.Then choose“apply update from sdcard”
7.Find and select the ROM, press volume+ to enter the page as below.
8.Please make sure the power is sufficient during the upgrading. It will showed as below when the upgrading finished.
9.Choose “reboot system now”,then press volume+ button to reboot your phone.
Also, Are you rooted?
Regards,
Exxo
Exxoriscism said:
Well, I can inform that you do need a custom recovery on that phone in order to flash a custom ROM... Or it wont work. But i dont have that phone, you can try this.
1.copy ****.zip to root folder of the phone SD card (no need to unzip).
2.Turn off the phone, then keep pressing power button and volume+ button until the robot icon appear, then press power button again and it will show as below
3.Press the volume- to move up and down to choose“wipe data/factory reset”, then press volume+ button to confirm.
4.Choose “yes—delete all user data”, then press volume+ button to enter the page as below.
5.It will enter below page after finishing delete all user data.
6.Then choose“apply update from sdcard”
7.Find and select the ROM, press volume+ to enter the page as below.
8.Please make sure the power is sufficient during the upgrading. It will showed as below when the upgrading finished.
9.Choose “reboot system now”,then press volume+ button to reboot your phone.
Also, Are you rooted?
Regards,
Exxo
Click to expand...
Click to collapse
Hi Exxo,
Thanks for your reply. Yes, i am rooted
Now in step 1 what do you mean with ***.zip. Is that supposed to a zipfile to change the recovery?
i tried downloading and flashing Clockworkmod Touch Recovery 6.0.4.3 CWM (downloaded from here: http://forum.xda-developers.com/showthread.php?t=2531628).
However it is giving me the following error:
Finding update pakacge
Opening update package
Verifying update package
E: failed to verify whole-file signature
E: signature verification failed
Installation aborted
anyone?

Looking to replace stock rom

Just purchased the P8000 with the stock UI and all those little apps they install that no one ever actually wants.
Is there a rom I can install that will basically put this back to being what I think is a standard UK phone. It versions are presently as follows.
Android V 5.1
BaseBand V: MOLY.LR9.W1444.MD.LWTGLMP.V16.P10
Kernel: 3.10.65
Build No: ALPS.L1.MP3.V2.NB6753.65U.L1_P22
Custom Build Version: Elephone_P9000_20151014
thanks in advance
You should try Eragon rom, this is much better than stock although it is based on stock it has been improved greatly. This is the only fully working rom at present.
http://forum.xda-developers.com/elephone-p8000/development/rom-06-9-eragon-1-0-android-5-1-t3195007
Sorry thats not true, there is a vibe and flyme rom but they either have Chinese apps or lots of features we can use.
Thats the one I think I am going to look at this evening when I get home, thanks. Cant understand why they have some great and cheap phones coming out of Asia but insist on filling them up with bloatware...
Personally I dont think the p8000 has much bloat especially compared to samsung phones. I am sure you will enjoy Eragon.
I lost my phone (lenovo) in Dubai, was not handed in at the airport, no surprises there, so this is a cheap alternative.
Anyway, followed the instructions, and my screen looks nothing like the one on the Elephone instructions page.
I can see the recovery function, but when I select it, the Elephone logo appears for a few seconds, then I have a dead Android icon, with red triangle and exclamation mark, so I cant even root the thing yet, even following their instructions
Try using philz recovery, this is what I use. Its a scatter file just like elephones clockworkmod version. Just to confirm, are you holding volume up button and power at the same time which brings up the bootloader. Then select what you want with volume up and confirm with volume down?
http://forum.xda-developers.com/ele...covery-philz-touch-6-59-0-port-p8000-t3224478
ok Im going to have another go at this, as I am not sure I did anything right.
Looking at the Phillz Link, it takes me to the flash info at Elephones site.
Followed the instructions and selected scatter file, flashtool download took about 4 seconds, max.
Came up with the big green tick in the window
Now is where I am lost, because it says the rom download is now completed, but nothing on the phone has changed, and there appear to be no more instructions?
What exactly have I just done, because its not entirely clear.
I am assuming I just downloaded a backup copy of the rom I have presently installed, the stock P8000 rom, but the instructions are not exactly clear on this
ok, this time on holding power and vol down I got a different display, but sadly the 4 available options were in chinese so I have no idea which one to select, and I suspect the next page, should I guess right, will also be in Chinese, so I guess I cant do this,
Right, making some, little, progress.
Now get into bootloader (instructions are not quite right for me, have to do Pwr + Vol Down, then select recovery, then hold power and vol up to get into bootloader
Anyway, select eragon from folders, and it starts then says failed with an error aborted.
Back to try again, with new fresh download
ok following the instructions from Eragon, I get to the select the zip and it starts and fails, however, I place the zip fileon what I know is the external microSD I put in the phone, but I get the feeling that during the start process it un-mounts this drive and thus fails immediately.
So, I am now able to do as follows.
Put ZIP onto external SD
Boot into Bootloader
factory reset phone
Select ZIP
Start install
fail with following information
E:cannot mount custom path
E:you must first setup a valid folder
/storage/sdcard1: Checking
/storage/sdcard1: mounted
Calculating MD5sum....
I then select YES - INSTALL Eragon_P8000_V_5.5.0.zip
Installing:/storage/sdcard1/Eragon_P8000_V_5.5.0.zip
Finding update package...
Opening update package...
E:/Cant Open storage/sdcard1/Eragon_P8000_V_5.5.0.zip
(bad)
E:Installation aborted
Press any key to continue
lovely, looks like its bricked.
Get logo nothing else
Can get to the android menu where it says recovery, something I cant read and normal, but recovery does nothing
Which revovery do you use?
Use thePhillz Touch recovery, cwm have problems with external sd.
Best way to install it is for you via SPFlash tool.
If you done with that, you can boot into bootloader and choose there recovery.
Than you should be able to install the marvelous Eragon ROM.
hth
Cheers
sorry Im not following you.
I have the flash tool software
I appear to no longer be able to get into the bootloader.
can I upgrade the firmware to Eragon using the flashtool?
I have to say, I am a very technical person but this is a baffling process.
I am well versed in rom updates on MB, Tablets etc, all of which should be similar.
after trying both the Eragon and Phillz instructions, nether worked for me
Then I found the phone sat at the logo and I was unable to do anything
Now, for unknown reasons it let me into the bootloader again
I am now able to factory reset
I am not going to try Eragon because it simply will not let me do it
Are you all sure you have the same phone, or that there are not perhaps some versions of the same phone where these instructions are not right?
What seems simple to do is proving impossible to do
Why else able to enter the recovery
111
spottedhaggis said:
I have to say, I am a very technical person but this is a baffling process.
I am well versed in rom updates on MB, Tablets etc, all of which should be similar.
after trying both the Eragon and Phillz instructions, nether worked for me
Then I found the phone sat at the logo and I was unable to do anything
Now, for unknown reasons it let me into the bootloader again
I am now able to factory reset
I am not going to try Eragon because it simply will not let me do it
Are you all sure you have the same phone, or that there are not perhaps some versions of the same phone where these instructions are not right?
What seems simple to do is proving impossible to do
Click to expand...
Click to collapse
I had trouble getting Philz recovery to load to phone but finally got it to work using the latest version of SP flash tool from Android MTK. Google to find it. Load the scatter.txt from unzipped Philz recovery, click download, attach powered off phone to PC. Only took a few minutes to load for me.
spottedhaggis said:
ok following the instructions from Eragon, I get to the select the zip and it starts and fails, however, I place the zip fileon what I know is the external microSD I put in the phone, but I get the feeling that during the start process it un-mounts this drive and thus fails immediately.
So, I am now able to do as follows.
Put ZIP onto external SD
Boot into Bootloader
factory reset phone
Select ZIP
Start install
fail with following information
E:cannot mount custom path
E:you must first setup a valid folder
/storage/sdcard1: Checking
/storage/sdcard1: mounted
Calculating MD5sum....
I then select YES - INSTALL Eragon_P8000_V_5.5.0.zip
Installing:/storage/sdcard1/Eragon_P8000_V_5.5.0.zip
Finding update package...
Opening update package...
E:/Cant Open storage/sdcard1/Eragon_P8000_V_5.5.0.zip
(bad)
E:Installation aborted
Press any key to continue
Click to expand...
Click to collapse
you still have the problem? if yes send me a pm . i can help

Categories

Resources