Currently i use amon ra's latest recovery on my phone. Im running myns rom and have no problems at all.
I do however want to run the ps3 psfmod recovery on my phone. Now i know i can flash this recovery and jailbreak my ps3, whats the fastest way to switch back to amon ra's recovery after this?
I know amon ra has a recovery image for another android phone which has the psfmod built in, but what would be my best bet, other then using flash_image via adb?
ijsut use the kernel version and reflash my kernel once done. it seems way easier to me
Is there. a link to the kernel? The guy released a update but its a .img recovery file
Sent from my PC36100 using XDA App
Mind if I ask is that a full jailbreak and what are the risks? I would suggest getting a used ps3 off craigslist to test it out on cause you might get banned from psn forever.
sfld said:
Currently i use amon ra's latest recovery on my phone. Im running myns rom and have no problems at all.
I do however want to run the ps3 psfmod recovery on my phone. Now i know i can flash this recovery and jailbreak my ps3, whats the fastest way to switch back to amon ra's recovery after this?
I know amon ra has a recovery image for another android phone which has the psfmod built in, but what would be my best bet, other then using flash_image via adb?
Click to expand...
Click to collapse
Swyped from Eva running Myn's RLS4!
Related
Was the clockwork recovery image built specifically for this or is it the same one used for the mytouch/g1/nexus ect?
Wondering just because I prefer to use Amonra's Recovery on my G1 and the Mytouch regular I have.
So basically wanted to know if I could use this on the Mytouch Slide too.
Wondering before I flash and accidentally brick it for doing something before making sure others think it is okay.
You actually CANNOT flash a new recovery, the only known method for changing the recovery is through the ENG-BUILD. Amon Ra's were built specifically for each device though.
I guess it would be POSSIBLE in THEORY to boot another recovery the same way we boot Clockwork, but you'd have to ask Eugene that.
I'm running CM7 with Clockworkmod 3.0.0.5. Im trying to flash the latest radio, so i need to flash back to a Clockworkmod 2.x.
But the thing is Rom manager already says my current recovery is 2.5.0.7. But when i actually reboot into recovery its definitely still 3.0.0.5. I've tried to flash all of the older versions of Clockworkmod available in Rom manager, and it says they flash correctly, and rom manager even reports that my clockworkmod version is the one i tried to flash. But when i reboot into recovery it hasnt changed.
Ive even tried to flash amon ra through rom manager and that did nothing.
I have "erase recovery" checked in settings. I tried to fix permissions. I've rebooted and even wiped data. Ive gone into market and uninstalled the updates to go back to rom manager 3.x but that didnt fix the problem. Ive wiped dalvik cache and that didnt work either.
Does anyone know what the problem is?
If not, does anyone have a link to a clockworkmod 2.x recovery.img so i can just manually flash it through fastboot? ive looked around everywhere but i cant seem to find one.
so i restored a really old backup of cm6 (which has rom manager 3.x), which i didnt even think was possible with CWM 3 and edify scripting, flashed amon ra in rom manager, and once i rebooted into recovery it was actually amon ra. i flashed the radio and all seems well. not sure why CM7 with rom manager 4 wouldnt correctly flash a recovery, but it seems resolved for me at least.
For future reference, it is just as easy and recommended to load amon RA via the bootloader as it is from the ROM Manager app.
posting & replying via the XDA Premium app.
dougjamal said:
For future reference, it is just as easy and recommended to load amon RA via the bootloader as it is from the ROM Manager app.
posting & replying via the XDA Premium app.
Click to expand...
Click to collapse
whats really the difference between flashing through the bootloader, flashing through rom manager, flashing through fastboot, or flashing through the command line with flash_image?
Obviously rom manager has problems, thats what this whole post is about. But as long as it actually does the flash there shouldnt be difference between the different methods of flashing should there?
You basically answered the question. It's not that ROM Manager is incapable, there have been times when it failed to flash recovery and there have been times when it didn't contain the latest RA recovery. Yea, those things are minor, but it is enough for me to discard using it. Besides, I'm always in the recovery itself so it is only natural for me to do everything from within recovery or the bootloader. But, to each his or her own.
posting & replying via the XDA Premium app.
dougjamal said:
You basically answered the question. It's not that ROM Manager is incapable, there have been times when it failed to flash recovery and there have been times when it didn't contain the latest RA recovery. Yea, those things are minor, but it is enough for me to discard using it. Besides, I'm always in the recovery itself so it is only natural for me to do everything from within recovery or the bootloader. But, to each his or her own.
posting & replying via the XDA Premium app.
Click to expand...
Click to collapse
Can i ask why you prefer amon ra over clockwork mod? Does one offer an advantage over the other? Does RA support edify scripting?
I was a faithful ClockworkMod user when I first rooted my device. I had no problems and no intention to switch until around version 3.x.x.x. after that, I started having issues with it not wiping properly so I switched over to amon RA. Although those problems have since been corrected, I have become quite accustomed to amon RA and until it fails me, I will stick with it. Furthermore, there have been times when people's devices have failed to properly boot or wouldn't allow access to recovery until they flashed amon RA. I like its menu layout and how well it works, but that's just me...
posting & replying via the XDA Premium app.
I've been using Amon RA basically since i've had my incredible, but recently with all these new roms, specifically the 3.0/3.5 roms, they seem to be only CWM compatible, and i was trying to switch back to CWM through ROM manager. It says it has been installed but everytime i boot into recovery, its just going to Amon RA. So i was wondering how i could install this manually? There seems to be a way to do it through ABD, but i have no experience with this, plus all instructions using this method i see seem to be for PC's, I have a MAC...
Any help is appreciated, thanks!
Try the PB31IMG versions from http://dougpiston.com/?page_id=85
Do you have "erase recovery" checked in the settings? It clears your recovery before flashing a new one. I know a lot of people have had issues upgrading versions of CWM because that box wasn't checked.
Sent from my Droid Incredible running some random CM7 nightly.
tried checking the erase the recovery box, did not work, but flashing it as a pbimg worked. Thanks guys!
mslam02 said:
tried checking the erase the recovery box, did not work, but flashing it as a pbimg worked. Thanks guys!
Click to expand...
Click to collapse
No problem, I knew you weren't completely screwed, just had to figure out which method to do.
Sent from my Droid Incredible running some random CM7 nightly.
Hey guys, Sprint ended up changing something on my account and screwing up my evo so I couldn't access 3g. Long story short, I RUU'd to get it back to stock and was able to then get 3g data back. Now it still shows S-Off, but I can't boot into recovery and the clockwork mod rom manager won't work, because it says my phone still needs to be rerooted. I was thinking since when I boot into recovery it says S-Off, i'm already rooted and I just need the zip for clockwork mod recovery and I can then go in and flash roms to my hearts content.
Does anyone know where I can find the .zip for clockwork mod recovery?
You need to flash clockworkmod through the bootloader I wouldnt recommend clockworkmod and most people don't recommend it you can find it on clockworkmod.com under recovery images and look for the EVO
Edit:also you might have to flash a superuser zip to get root back
Sent from my PC36100 using XDA App
I don't personally recommend clockworkmod to use as your recovery, but if you just need to have it, you should find it much easier to run the attached PC36IMG file from your SD card.
Also, you may need to flash (or install from SD card) through clockwork the attached superuser zip file to obtain your root permissions if you are going to continue to use stock ROM.
That works
Thank you Shorty Dogg - the pc36img.zip was exactly what i needed. I'm used to Amon Ra, but wanted to try out clockwork. Thanks again!
I would use amon RA or amon RA style supersonic recovery since u had cwm b4 I'd recommend RA style supersonic recovery 3.0.8 as it will allow you to use your cwm backups as well as RA backups and any backups you make in the future, plus it has capacitive buttons and touch screen working in recovery has a battery level option and etc check it out in development
Sent From My EViLizED-iCS-EVo4G
hcavlnch said:
Thank you Shorty Dogg - the pc36img.zip was exactly what i needed. I'm used to Amon Ra, but wanted to try out clockwork. Thanks again!
Click to expand...
Click to collapse
Good luck cwm is garbage compared to RA on the evo it doesn't like to wipe properly alot of times, as well as it doesn't have the same wipe options as RA, atleast it didnt the last time I used it which has been a minute I ditched it for RA almost immediately
Sent From My EViLizED-iCS-EVo4G
ok i've used the rev tool and installed superuser but says not rooted. I've installed busy box and this is what it is saying. " error. root access not detected. Your device must be rooted to install busy box. if you fell that youare recieving this message in error please go into superuser app and click on busybox installer and then click forget and restart this app." but it is not showing that in superuser. do i just flash the superuser in this section and try it again. i'm rooting a friends phone and followed the instructions to the t. thanks in advanced.
I successfully rooted my phone a few days ago using the Revolutionary method and flashed ClockworkMod Recovery without a problem. Then I flashed CyanogenMod 7.1.0 again without a problem. I noticed my gps has been having an issue detecting my location so I figured I should flash the nandroid for my stock rooted android 2.3.3 rom and see if the issue still exists. My main problem is that I can't boot into recovery. Apparently I have the latest version of Clockwork. I try to boot into recovery using different methods and I keep ending up at the white screen that says 'Revolutionary' in pink at the top with the 3 skateboarding androids at the bottom. I try to get to recovery from that screen also still with no success. It just reboots into that screen. I was thinking I may have to use the ruu to unroot my Evo (I rather find an alternative solution). How can I regain my ability to boot into recovery? Any help would be much appreciated...
__________________
HTC Evo 4G
CyanogenMod 7.1.0
ClockworkMod 5.0.2.2
If grab the pc36img for amon_ra, throw it in the root of your SD, using a card reader in a computer, get into hboot and let it install. Then try to get into recovery. F clockwork anyway.....90% of the peeps around here having problems are running that recovery
DoubleA319 said:
I successfully rooted my phone a few days ago using the Revolutionary method and flashed ClockworkMod Recovery without a problem. Then I flashed CyanogenMod 7.1.0 again without a problem. I noticed my gps has been having an issue detecting my location so I figured I should flash the nandroid for my stock rooted android 2.3.3 rom and see if the issue still exists. My main problem is that I can't boot into recovery. Apparently I have the latest version of Clockwork. I try to boot into recovery using different methods and I keep ending up at the white screen that says 'Revolutionary' in pink at the top with the 3 skateboarding androids at the bottom. I try to get to recovery from that screen also still with no success. It just reboots into that screen. I was thinking I may have to use the ruu to unroot my Evo (I rather find an alternative solution). How can I regain my ability to boot into recovery? Any help would be much appreciated...
__________________
HTC Evo 4G
CyanogenMod 7.1.0
ClockworkMod 5.0.2.2
Click to expand...
Click to collapse
Turn off your phone,then when turning it on hold the volume rocker in the down position,you will then boot into hboot settings,hboot will automatically check for the update file(PC36IMG)after its done,scroll to recovery and enter that way,if you still cant get into recovery,you will need to download and reinstall the latest revolutionary root tool,i recommend using "TeamWin Recovery Project" i've never had a problem with it.
Just to let you know, guys, TWRP v2 is out! I'll post the link to Amon Ra. You can find the link to TWRP 2 in my sig.
http://forum.xda-developers.com/showthread.php?t=1339654
Thanks for the answers. I'll reply again when I get a chance to put the advice to use
Sent from my PC36100 using XDA App
Lacedaemon said:
Just to let you know, guys, TWRP v2 is out! I'll post the link to Amon Ra. You can find the link to TWRP 2 in my sig.
http://forum.xda-developers.com/showthread.php?t=1339654
Click to expand...
Click to collapse
I was actually going to go the amon ra route because i was familiar with it while I had a HTC Hero. But TWRP v2 caught my attention and I decided to go that route. So far so good as far as I can tell. I made a nandroid backup. Thanks. Any tips or info I should know about using TWRP?
And 1 more thing. I have a nandroid backup from when I had clockwork recovery. I should still be able to flash that back up right?
DoubleA319 said:
I was actually going to go the amon ra route because i was familiar with it while I had a HTC Hero. But TWRP v2 caught my attention and I decided to go that route. So far so good as far as I can tell. I made a nandroid backup. Thanks. Any tips or info I should know about using TWRP?
And 1 more thing. I have a nandroid backup from when I had clockwork recovery. I should still be able to flash that back up right?
Click to expand...
Click to collapse
Nope you can't flash your CWM backup since your on TWRP. You would have to flash back to the version of CWM that you made the backup with
Sent from my PC36100 using XDA App
Man that sucks. I need to be able to access that particular nandroid. Thats my stock backup right after I rooted my phone. Ok so I can flash back to clockwork, restore my nandroid, then go back to TWRP and make a backup compatible with TWRP?
DoubleA319 said:
Man that sucks. I need to be able to access that particular nandroid. Thats my stock backup right after I rooted my phone. Ok so I can flash back to clockwork, restore my nandroid, then go back to TWRP and make a backup compatible with TWRP?
Click to expand...
Click to collapse
Yup
Sent from my PC36100 using XDA App
How can I figure out the version though? clockwork installed on my phone right after I rooted my phone via the revolutionary method. I did this about 2 weeks ago. Im guessing i have to go through rom manager, but this was part of the issue to begin with
DoubleA319 said:
How can I figure out the version though? clockwork installed on my phone right after I rooted my phone via the revolutionary method. I did this about 2 weeks ago. And where can I get clockwork from?
Click to expand...
Click to collapse
Clockworkmod.com . Also I believe revolutionary gives you the latest version so just flash the latest CWM for the evo4g
Sent from my PC36100 using XDA App
some how after flashing twrp then going back to cwm via rom manager, cwm seems to be working now
DoubleA319 said:
How can I figure out the version though? clockwork installed on my phone right after I rooted my phone via the revolutionary method. I did this about 2 weeks ago. Im guessing i have to go through rom manager, but this was part of the issue to begin with
Click to expand...
Click to collapse
I installed a new recovery after i installed revolution,because i also had recovery issues.The version should be at the top of the recovery screen.I didnt like rom manager too much,for some reason it gives me problems.
They say that this version of Amon can be used to restore clockwork backups. I haven't tried it with clockwork myself because I avoids clockworkmod.
Thanks for the help everyone. Everything is gravy now. I'm happy with TWRP. I do have a question for making a backup. By default in TWRP, the 1st 3 boxes are checked up for when attempting to make a backup. Do any of you guys ever check the other boxes (Recovery, cache, .android_secure) and if so, why? Also, when you attempt to wipe before restoring, which items do you guys wipe? Any other tips or suggestions about this recovery would appreciated too.
I backup everything except cache.