[Q] Cant find .dll file error message before communicating - MDA III, XDA III, PDA2k, 9090 General

Sorry if this is obvious but I've flashed my unlocked SX66 numerous times and thought I knew what I was doing
With this one I am putting maupgr_noID and the nbf file in the same directory, putting the unit into bootloader mode, getting communication on activesync, and trying to flash: All I get is a 'cant find .dll file' apparently in the MAupgrNoID upgrade package before any communication starts on the flashing part
I am using XP with all appropriate upgrades (to the ,net) etc and put the directory in the root etc and am slightly out of ideas on this one?
Is there some other upgrade utility that I should be using? I have a Wing, Hermes, Wizard, have tried out awide variety of ROMs over the years and am a bit unused to the upgrade utility not having the nbf file in the package. I have Helmi on at the moment and was trying to flash the most recent version of D-Two but when I asked in that thread, no one had any ideas. Is there a better ROM I can try if no one on that thread has any ideas? All I need is WiFi to work as i dont have a data plan

Try MDA III UTIL from that link:
http://www.4shared.com/dir/26141766/9d9524e0/MDA_III.html

Thank you for that
The same file looks 4 kb smaller and the dll file seems to be separate:
Many thanks I will give it a try with that dll file in the same directory

That did the trick
Just a short note to thank you again
Using that MA_UPGRADE utility and putting the dll file from the on-line directory to which you referred me into the local directory did the trick

Related

error accessing image when using ER2003Edit

firstly, i am trying to flash the rom following the guide from romkitchen.
after using dos command, i want to double check whether i set the operator correctly.
so i use er 2003 edit for fast checking
NK.nbf and radio.nbf have no problem
except that when i open MS_.nbf, with the correct password type in, it just prompt me
error access image.
i checked the setting is correct.
I want to confirm whether this error is normal
please advice
thanks
keith
download he patched ER2003Edit from the thread mentioned in WIKI.
The original had this problem if you have file type = auto detect in the file open dialog. Choose Extended Rom and it will work.
dont use the romkitchen to get roms for xda2 devices it's ONLY xda1 roms which can be made in the romkitchens
if i dont follow romkitchens, then who can give me a brief explanation or can say easy way to upgrade from XDA 2 to WM2003SE
I used to upgrade my ROM before, but due to people giving a lot of ways to do it, i am getting confuse.
need someone to compile the overall documentation
what i did last time
1. unlock all files and change the operator name to O2
2. put or remove cab files into my extROM, including editing the config.txt
3. flash it
after reading so much, i am still thinking with the genuine WM2003SE, do i need to edit a lot?
i believe i need to change the operator name to O2.
as i am from Asian, i also believe i need to put in Asian Cab, so that my phone, will display local telco.
also when u say genuine WM2003SE, does it means is standard package ?
thanks for advice again
@Rudegar : I hope/think he means following the instructions in the WIKI HimalayaRomkitchen. which is maybe a confusing name, but a good starting point to learn about upgrading (At least that is my humble opinion)
the reason why you are getting this message is becaz after you click on file open rom image window pops up over there at the ottom thers an option giving different file names make sure you have WM2003 Extended ROM (ms_.nbf) selected there to open ms_.nbf or accordingly.
regards
jeetz
yeah thanks, i got it done
appreciated.

"Un-brick" Imate JasJar After Failed ROM Update

First time post ...
I recently downloaded the 1.13.53 WWE ROM update from the Imate site and attempted to install it on my JasJar. The update failed leaving my JasJar in boot loader mode. No reset method seemed to work to bring it back up. Subsequent attempts to load the ROM update gave me the dreaded "Country Code" error. Here are the steps I followed to get the ROM update to succeed:
1. Uninstalled ActiveSync 4.0 and installed ActiveSync 4.1 as downloaded from XDA FTP site. Disabled firewall and Anti-virus. Rebooted machine. I am not sure whether this step was neccessary or not but noted that others had some success with this. At this point I was still getting the country code error when trying to install ther update.
2. Run the update but once you get to the first screen that asks you if you want to proceed, switch to the Windows file system using Explorer and set the current directory to your TEMP directory. If you are not sure where this is, open a command prompt (Start - Run - CMD - OK) and type SET. This will display environment variables. Look for the one called TEMP - that is where you want to go.
3. Search for a file called ROMUpgradeUT.exe or RUU.conf anywhere in the TEMP directory or its subdirectories. When you find the correct directory, copy the files to a new location.
4. In the new location, edit the RUU.conf file and add the following text at the end of the file:
[CHECKCEID_TYPE]=1
5. Save the file and then run ROMUpgradeUT.exe
At this point I was able to get past the country code error and the update began. The radio upgrade was the first component and it took the most time (about 10-15 minutes). The other 2 components upgraded the extended ROM and the OS but only took about 5 minutes each.
After getting the completion message on my PC I also noted a "100% complete" message on the JasJar screen. After a hard reset (soft keys and reset) the JasJar came up with the upgraded ROM in place and I was REALLY HAPPY!
I don't know if this will work for anyone else - use at your own risk but I wanted to share what has worked for me.
BTW - many thanks to all the previous posters who left "breadcrumbs" for me to follow in getting my JasJar back. This community is SUPERB!
Thanks again.
Rick
Did like u said.
Still country id error
works now
thanks
my device t-mobile mda pro jasjar bootloader nope
rsteel1 said:
First time post ...
I recently downloaded the 1.13.53 WWE ROM update from the Imate site and attempted to install it on my JasJar. The update failed leaving my JasJar in boot loader mode. No reset method seemed to work to bring it back up. Subsequent attempts to load the ROM update gave me the dreaded "Country Code" error. Here are the steps I followed to get the ROM update to succeed:
1. Uninstalled ActiveSync 4.0 and installed ActiveSync 4.1 as downloaded from XDA FTP site. Disabled firewall and Anti-virus. Rebooted machine. I am not sure whether this step was neccessary or not but noted that others had some success with this. At this point I was still getting the country code error when trying to install ther update.
2. Run the update but once you get to the first screen that asks you if you want to proceed, switch to the Windows file system using Explorer and set the current directory to your TEMP directory. If you are not sure where this is, open a command prompt (Start - Run - CMD - OK) and type SET. This will display environment variables. Look for the one called TEMP - that is where you want to go.
3. Search for a file called ROMUpgradeUT.exe or RUU.conf anywhere in the TEMP directory or its subdirectories. When you find the correct directory, copy the files to a new location.
4. In the new location, edit the RUU.conf file and add the following text at the end of the file:
[CHECKCEID_TYPE]=1
5. Save the file and then run ROMUpgradeUT.exe
At this point I was able to get past the country code error and the update began. The radio upgrade was the first component and it took the most time (about 10-15 minutes). The other 2 components upgraded the extended ROM and the OS but only took about 5 minutes each.
After getting the completion message on my PC I also noted a "100% complete" message on the JasJar screen. After a hard reset (soft keys and reset) the JasJar came up with the upgraded ROM in place and I was REALLY HAPPY!
I don't know if this will work for anyone else - use at your own risk but I wanted to share what has worked for me.
BTW - many thanks to all the previous posters who left "breadcrumbs" for me to follow in getting my JasJar back. This community is SUPERB!
Thanks again.
Rick
Click to expand...
Click to collapse
this method how?my jasjar can open normal ?
help me
error 101 problem
error 150 problem
MaUpgradeUt_noID trying in my jasjar error problem 150 .whats saying ? problm where? usb dont recognize xp .what must ı do?
please help me im using Vista and cant get connection with my imate to my pc... and what is a radio update if you can help me add my msn!
i dont want to update anymore i just want to get my wm5!
Have a look here:
http://wiki.xda-developers.com/index.php?pagename=FlashVista
Hope it helps,

New Qtek 9000 Rom?

im a bit confused about all the threads about Qtek 9000 rom's..
however, it seems that Dangaard in my country will NEVER deliver an official ROM update..
IS there a working update for the Qtek 9000, that I can download somewhere?
Right now i have version 1.13.64 WWE, Radio 1.03.00
Please help a newbie
Do what I did, run a million bullet through the qtek 9000 and weep for never buying another peice of crap brand!
Gilbert
Qtek Rom
Gilbert, I have a Qtek 9000 and I installed the new i-mate Rom: working fine!
You can do the same :wink:
Gilbert said:
Do what I did, run a million bullet through the qtek 9000 and weep for never buying another peice of crap brand!
Gilbert
Click to expand...
Click to collapse
Or, download the Jasjar Rom 1.30.76 and flash. It is very easy and works like a dream.
megaraid said:
Gilbert said:
Do what I did, run a million bullet through the qtek 9000 and weep for never buying another peice of crap brand!
Gilbert
Click to expand...
Click to collapse
Or, download the Jasjar Rom 1.30.76 and flash. It is very easy and works like a dream.
Click to expand...
Click to collapse
Thank you, were du i find this?
Jasjar Rom 1.30.76
ftp://ftp.clubimate.com/JASJAR_WWE_13076_164_10900_wwe_ship.zip
You need maupgradeut_noid
:lol:
Re: Jasjar Rom 1.30.76
Ecraseur said:
ftp://ftp.clubimate.com/JASJAR_WWE_13076_164_10900_wwe_ship.zip
You need maupgradeut_noid
:lol:
Click to expand...
Click to collapse
Hi!
And thank you..
what do I do with the maupgradet_noid?
MaUpgradeUt_noID.exe
MaUpgradeUt_noID.exe is a to Tool to avoid country ID and Operator ID errors.
MaUpgradeUt_noID.exe
MaUpgradeUt_noID.exe is a to Tool to avoid country ID and Operator ID errors.
MaUpgradeUt_noID.exe
MaUpgradeUt_noID.exe is a to Tool to avoid country ID and Operator ID errors.
Re: MaUpgradeUt_noID.exe
Ecraseur said:
MaUpgradeUt_noID.exe is a to Tool to avoid country ID and Operator ID errors.
Click to expand...
Click to collapse
Do I run it on my PC or Qtek?
Right now it wont start on the PC...
What you do is unpack the contents of the rom exe file into a directory, then you take your noid exe file and put in the same folder as the rom files, or the same folder of the normal loader file, and run the no id. This may vary depending on the layout of the contents in the big rom exe file, and yes you run the stuff on your pc, while having your Universal connected to the computer in Active Sync usb linked mode...
If you get the hassel of the country id after running it first time, quickly run it again and DUN touch the pda no matter what wierd setting it may be in, sometimes the first time only put the device into bootload mode, and then give an error message, but when run the second time itll flash the pda correctly hope this will help you.
theorion said:
What you do is unpack the contents of the rom exe file into a directory, then you take your noid exe file and put in the same folder as the rom files, or the same folder of the normal loader file, and run the no id. This may vary depending on the layout of the contents in the big rom exe file, and yes you run the stuff on your pc, while having your Universal connected to the computer in Active Sync usb linked mode...
If you get the hassel of the country id after running it first time, quickly run it again and DUN touch the pda no matter what wierd setting it may be in, sometimes the first time only put the device into bootload mode, and then give an error message, but when run the second time itll flash the pda correctly hope this will help you.
Click to expand...
Click to collapse
Thank you!
I cant get it to work..
It just shows the screen thats supposed to show witch ROM i have, and witch one Im upgrading to.. but no data- Just blanks.
If i press "Upgrade" it finishes after 30 sec, and says "Congratiolations" and so one..
but nothing is happening on my qtek?
When you unpack the .EXE ROM files, there are 2 directories worth of files, you have to transfer all the files in these directories to one directory, then put the MAUpgradeUT_NOID in same directory then run from there.
Maybe MAUpgrade is all by it's lonesome self in that directory
Works!!
thanks everyone!!
Now:
How does this MIcrosoft directpush work? Cant seem to find any settings for it. But when i select "when new items arrive" i can see the symbol is highlighted in the commmanager.
Bestchops said:
Works!!
thanks everyone!!
Now:
How does this MIcrosoft directpush work? Cant seem to find any settings for it. But when i select "when new items arrive" i can see the symbol is highlighted in the commmanager.
Click to expand...
Click to collapse
Go to 4smartphone.com .... They have trial host exchange server push e-mail thingy so you can try it out. Everything is there at their site regarding push email setup
make sure all the files are in the same folder then, like this fx,
enterbl.exe
getdevicedata.exe
MaUpgradeUt_noID.exe
ms_.nbf
nk.nbf
radio_.nbf
ruu.conf
ruu.dll
ui.dll
And try running the file then...
Btw i presume you are trying to upgrade to Universal_Upgrade_v1.30.68_radio_1.09.0
the extended rom gets to 1.30.153 WWE

HOW TO: Rom Upgrade - Universal / XDA Exec

Well, this is pretty newbie advice to most of you, so you may think it doesn't warrant a write up, but I had to do some searching for info on how to upgrade my ROM so I thought it would be good to put it all in one thread.
1) Download the ROM you want from the FTP server....Details here http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site
2) Download MaUpgradeUt_noID.exe to your Desktop from here http://forum.xda-developers.com/download.php?id=7644
3) Disconnect your device from the USB cable.
4) Hold the Power button + Light bulb button, and press the reset pin found at the back of the device (fiddly if you have large fingers).
You will notice that the screen of the device is dark but has “USB” and "v 1.0" written on it.
5) Connect back your device via the USB cable.
6) Run the download ROM upgrade application...When it prompts you to begin the upgrade process, just minimise the window or leave it alone (DON'T CLOSE THE PROGRAM).
7) Whilst it is running, use Windows to search for a file named RUU.dll
8 ) Right click file and choose ‘Open Containing Folder’
9) Select all files and copy them
10) Create a temporary storage location....C:\Upgrade....And Paste all copied files in here.
11) Copy the file MaUpgradeUt_noID.exe from the desktop into C:\Upgrade
12) Close the previously started upgrade application running in the background
13) Run MaUpgradeUt_noID.exe from it's C:\Upgrade location
The upgrade process should begin now…If it does not, run the MaUpgradeUt_noID.exe application again
Make sure you DO NOT DISCONNECT the cable.
The upgrade takes around 20 minutes to complete.
14: Disconnect the USB cable when told, then push the reset pin. Ignore the advice to do a hard reset by holding down the soft keys while you do this, just push the reset pin by itself. Your Universal will load the new ROM image and you're all done.
Thanks.
Thanks!
There is only one thing, step 4, it is not USB but Serial.
Mento said:
Thanks!
There is only one thing, step 4, it is not USB but Serial.
Click to expand...
Click to collapse
It will go to USB when upgrading.
It doesn't seem to work with last Qtek 9000 ROM...
Help!
OK, I made my own instructions. Follow this instruction of mine:
The file is extracted in your computer. Once you run the shipped.exe file, you need to go to:
My Computer
Your Drive (mine is Drive C)
Show the contents of this drive
Documents and Settings
Choose your folder name
Choose "TOOLS" from the menu bar
Choose "FOLDER OPTIONS"
Click on the "VIEW" tab
Click on "HIDDEN FILES AND FOLDERS"
YOU WANT TO SHOW ALL HIDDEN FILES AND FOLDERS
Now go to TEMP folder
Now you will notice a bunch of folders will show up, tons of them to be exact. What you need to do now is click on the shipped.exe file again and "LOOK" for the folder being created because that folder is what you want to copy. If you did not see it created, you have to manually open each folder and look for the files I listed below.
Assuming you found the folder, you will have these following files inside that folder:
ms_.nbf----------------------this file is responsible for EXT ROM Version
nk.nbf------------------------this file is responsible for Windows Mobile Version
radio.nbf---------------------this file is responsible for Radio Version
EnterBL
GetDeviceData
readme
ROMUpgradeUt
RUU.conf
RUU.dll
UI.dll
MaUpgradeUt_noID
If the file MaUpgradeUt_noID is not there. You need to get hold of a copy of this file as you need this.
There you have it, REMEMBER, you need to have the MaUpgradeUt_noID file plus all the rest of the file if you want to upgrade to the ENTIRE I-Mate ROM, QTEK, O2, or whatever ROM you want.
If you only want to upgrade to the radio version then you need to delete 2 files namely: "ms_.nbf" and "nk.nbf". Leave "radio.nbf" alone and click on the "MaUpgradeUt_noID" file to initiate the Radio installation. Basically those 3 files control what you want to update on your device.
Hope my instructions were clear enough for you. Hope this helps.
cannot locate files after running exe
Hi All, I have ran the ROM update exe and the message saying extracting file XXX etc appears OK then the program closes. When I search for the files, for instance *.nbf they dont exist anywhere on the computer - does the exe autodelete the temp directory and have I missed a stage ? Any help gratefully accepted
Re: cannot locate files after running exe
SteveInUK said:
Hi All, I have ran the ROM update exe and the message saying extracting file XXX etc appears OK then the program closes. When I search for the files, for instance *.nbf they dont exist anywhere on the computer - does the exe autodelete the temp directory and have I missed a stage ? Any help gratefully accepted
Click to expand...
Click to collapse
Did you follow the instructions above on how to show hidden files and folders? After double clicking the .exe file and running it, leave it open then look for the NEWLY created folder in the TEMP folder as instructed. You need to look for it the hard way by opening each folder one by one and check for the files to see if you got the right one.
someone advised me for some extra step, someone please advise is it coorect steps:
"Then you need to make a small change to one of the text files. Look in the directory for
RUU.conf
Open it in notepad and add this line
[CHECKCEID_TYPE]=1
then save it
That’s about it….."
thx for reply christian,
yes i tried searching every folder the manual way but still no joy, I have just copied the rom exe onto my other computer and it worked OK on there and updated my exec without any further problems
Hi All, Linked to the update of the exec software , i noticed the audio playback on tom tom navigator and media files is very jerky to the point you can hardly make out what is being said. has anyone else had the same problem and have you found a solution to fix the problem ?
many thanks
Steve
Bricked QTek 9000
I got a Qtek on ebay and it was working when I tried to upgrade it failed with a "115" Radio Error.
Tried the method on this thread and it completes the upgrade but when I reset, I does not change from "USB v1.0" can anyone help!!!!
Hi
I'd like to take the risk for updating my Dopod 900 for new versions of ROM & radio, but I've got couple of questions.
1. I've got Dopod 900. I do understand, that it's absolutely the same with Qtek9000, but to be sure: may I use ROM update for Qtek?
2. My ROM (1.13.69) & radio (1.04.02) as of 10/12/05 are ancient What version of ROM & radio consider to be stable as of now? I saw in signatures that people using ROM 1.30.77 and radio 1.09.00. Are they OK?
3. I got on FTP and was a bit confused: as far as I understood the latest ROM is 1.30.100 (UNI_QTEK_130100_190_10900_ESN_Ship.exe), but it's for ESN (Spanish???) localization. So in order to get WWE I should use UNI_ORUK_13090_174_10300_WWE_Ship.exe and that update radio separately from 1.03.00 up to 1.09.00 or just UNI_QTEK_13077_176_10900_WWE_Ship.exe? What would u advice me?
4. What is the benefit for updating from 1.13.69 and 1.04.02? Will it works faster & more stable?
Thx in advance & take care
Hi
I tried this and get a 120 (incorrect country ID) error.
Strange, my V1640 from Vodafone is spanish and i want to upgrade to UNI_QTEK_130100_190_10900_ESN_Ship.exe
so it should be ok.
Am i wrong? Is there a way to get rid of that message?
Hi I have a Xda Exec
ROM: 1.13.82 WWE
Rom date 11/30/05
Radio 1.04.02
Protocol 42.37.P8
Ext Rom 1.13.188WWE
And when i do this:
4) Hold the Power button + Light bulb button, and press the reset pin found at the back of the device (fiddly if you have large fingers).
The devide says me:
Boot options:
Enable KITL
Clean registry hive
Format storage
I soupouse that it isn´t the boot loader for go on with the proces... what happens?
I want to upgrade to UNI_QTEK_13077_176_10900_WWE_Ship.exe for use my heasphones motorola stereo... (AD2P..)
Can any body help me?
Thanks a lot
Please!!!
Edit post number 1 and add as the last step:
14: Disconnect the USB cable when told, then push the reset pin. Ignore the advice to do a hard reset by holding down the soft keys while you do this, just push the reset pin by itself. Your Universal will load the new ROM image and you're all done.
It seems that a lot of people are having trouble after a ROM upgrade by following the instructions on the upgrade program which tell them to hard reset.
Many thanks! PU10 by German T-Mobile upgraded to WWE
I have a T mobile mda pro, any recommendations as to what the best rom is.
Im torn between the new orange rom which is supposed to be good and the jasjar one?
Anyone?
Latest jasjar ROM
Hi,
Can I follow these instructions with my UK jasjar?
Where can I find the latest Rom?
Cheers
Anyone can point me out to the adequate ROM?
thanks
astpaul said:
Hi
I tried this and get a 120 (incorrect country ID) error.
Strange, my V1640 from Vodafone is spanish and i want to upgrade to UNI_QTEK_130100_190_10900_ESN_Ship.exe
so it should be ok.
Am i wrong? Is there a way to get rid of that message?
Click to expand...
Click to collapse

Corrupt Charmer (PM200) upgrade help

Guys, my phone is dead and I need a little help please.
I have a T-Mobile MDA Compact II and have mistakenly (why it worked I don't know) 'updated' it with a Prophet firmware release. This progressed as I expected but was I since discovered completely wrong. My phone now shows a black screen with Dopod logo on boot and then hangs.
I have since found this site (looks good btw!) and subsequently the ftp area. I've downloaded the correct firmware for my phone, reset into the three colour screen and kicked off the Romupdater for the proper version I believe to be for my phone. With the 2 releases from ftp (one in that directory appears to be only half a zip file) they appear to be uploading but there is no change with the black screen problem.
I'm now stuck and am hunting for options. I'm more than happy to help myself but can someone explain what I need to do and start me on my way to fixing this.
All because it hangs from time to time when I run up too many apps on it.
Thanks in advance
Andy
Tell us what ROM you are using and which software you are using to perform your ROM update.
Anyway, it is weird that the Prophet ROM doesn't work on your phone. Keep this low tone, but I've done a Prophet ROM flash on my Charmer before. Everthing works well except the camera, that's why I flashed it back to the original ROM. I won't advise others to do so, there seems to be a few 'fatal' cases. I'm not sure, probably because it is compatible with the earlier Prophet version.
UPDATE: Nevermind, you seems to have the information. Good if you can stick to the same threat to avoid confusion. To others, please refer to
http://forum.xda-developers.com/showthread.php?t=275337&highlight=
At work and I've left the phone at home but I believe it was something like 2.3.15 (i.e. upgrade from v1 to v2)
Correction, it's SPL 2.15, IPL 1.12.
I have seen a post on Hermes bootloader access over USB using Mtty and now have access to the cmd> Can someone help me perform a bootloader based ROM downgrade to known working or deleting the image that is there?
Have now found the awizard utility, which file type does awizard need to be fed via the ROM directory?
Yes I'm a newbie at this and shouldn't have messed with the ROM update but I'm an I.T. guys by trade so if you can feed me the info I need I should be able to follow instructions
Phone is still 'dead' though.
It needs
XXX-OS.nba
XXX-Radio.nba
XXX-ExtROM (directory wit Ext Rom stuff)
You ought to get these from the FTP. I've myself uploaded a Charmer original UK ROM T-mobile, it should be still there is no one messed with it.
Hmm, I've missed something then. I put the .nba files into the ROM directory and then run awizard and hit w. Where I would expect to see a list of files with numbers there isn't any.
What I miss?
the dir structure of the aWizard looks like the attached, where you have the ROMs under the "ROM" dir and Ext ROM. Where the aWizard directory has the aWizard.cmd file.
Can someone provide a split up (i.e. seperated nbf files) for the Charmer or the correct memory addresses to punch into nb2nbf to create my own?
The images seem to have been removed from the FTP site and I'm in position to de-brick my phone!

Categories

Resources