Related
I was updating my freinds dash, he had official rom on it, i went to rose rom v1.7a and also kavana final and some others and then i went back to latest t-mobile official rom 1.16 something, and all of them now say "drivers is not loaded" when you go to look at the wifi status, I loaded the WM2005 SDIO wifi drivers cab and also got a fresh copy of wifiinit.exe in the windows folder and then put the shortcut to it in the startup folder....i now have it running the rose v1.7a, i am lost, i'm on the phone now with a clueless pda expert at t-mobile.
still no solution to this problem, my friend might have to reflash back to original and do warranty exchange...i don't know what went wrong...he needs a new phone anyways...or maybe get the updated dash
wifiinit.lnk must be in the windows startup folder, or the drivers wont load this has been covered and a forum search would have shown you that
Bupahs said:
wifiinit.lnk must be in the windows startup folder, or the drivers wont load this has been covered and a forum search would have shown you that
Click to expand...
Click to collapse
They are in there, the wifiinit.ink is in startup and the wifiinit.exe is in the windows folder, still no luck...reflashed to original rom (even that didn't work), i'm hoping there is a cab that can reload the driver...but only found SDIO wifi driver cab..those don't work....
pychobj2001 said:
They are in there, the wifiinit.ink is in startup and the wifiinit.exe is in the windows folder, still no luck...reflashed to original rom (even that didn't work), i'm hoping there is a cab that can reload the driver...but only found SDIO wifi driver cab..those don't work....
Click to expand...
Click to collapse
The drivers are included in every ROM I have ever flashed, loading them comes from the .lnk file. So unless you are getting an error that the drivers do not exist or have failed they are their. It is possible your .lnk file is pointing to the wrong location
Bupahs said:
The drivers are included in every ROM I have ever flashed, loading them comes from the .lnk file. So unless you are getting an error that the drivers do not exist or have failed they are their. It is possible your .lnk file is pointing to the wrong location
Click to expand...
Click to collapse
no, becuase i deleted the .ink, copied the .exe from the windows dir and pasted a shortcut of it in the startup folder.....i don't have the dash now..my friend does...I think he should go to the g1, or just grab a 1yr replacement one, but he doesn't want a refurb which is ussaully what they give u
pychobj2001 said:
no, becuase i deleted the .ink, copied the .exe from the windows dir and pasted a shortcut of it in the startup folder.....i don't have the dash now..my friend does...I think he should go to the g1, or just grab a 1yr replacement one, but he doesn't want a refurb which is ussaully what they give u
Click to expand...
Click to collapse
why would you move the exe? How did you make a shortcut if you moved the exe? The G1 sux (sorry to those that think otherwise but it does). You only get a refurb if you dont ask for a new replacement. I always get new, after all I bought a new device not a refurb didnt I?
Anyway, it sounds like you created a bad shortcut for wifi and thats your issue
the .ink file is mising in my startup folder. What should i do? the .exe is still there
nikmash232 said:
the .ink file is mising in my startup folder. What should i do? the .exe is still there
Click to expand...
Click to collapse
Make a new link file, use total commander to do it or if you need I can upload one for you
pychobj2001 said:
I was updating my freinds dash, he had official rom on it, i went to rose rom v1.7a and also kavana final and some others and then i went back to latest t-mobile official rom 1.16 something, and all of them now say "drivers is not loaded" when you go to look at the wifi status, I loaded the WM2005 SDIO wifi drivers cab and also got a fresh copy of wifiinit.exe in the windows folder and then put the shortcut to it in the startup folder....i now have it running the rose v1.7a, i am lost, i'm on the phone now with a clueless pda expert at t-mobile.
Click to expand...
Click to collapse
I have the same problem, the WIFIinit.lnk is in the startup folder, and WIFI is not working. Any help?
majedaly said:
I have the same problem, the WIFIinit.lnk is in the startup folder, and WIFI is not working. Any help?
Click to expand...
Click to collapse
Strange, the problem was due to a defective battery! Seems that when I try to switch on WIFI and SD, the battery level goes down in a way that the OS does not load the drivers. Charged the battery to 100%, and rebooted, everything works normally.
if you have a drivers problem, should try with this...i had the same in my dash...."drivers not loaded"...i put this files on the phone and wifi works again.
Please help
I just got my dash. I upgraded it to the kavanna but then i wanted to give the vanilla version a try since i needed a cleaner version it had a picture of the tmobile shadow but i thought it would be ok since the folder tittle said excalibur. It gave me and error at 3 % saying that the iimage was the incorrect size. Then it started up with kavanna but there was no wifi option. Then i downgraded to wm6 standard but my wifi wont start. When i check the settings it tells me that the driver is not loaded. Ive been looking around in this forum for 2 days. All i see is people saying that this topic has been covered already. I tried the wininit.ink and exe thing and no success. I hard reseted and nothing. I tried different roms and the official tmobile but nothing seems to work. Is there a way to start from scratch???i just want to stick with the official tmobile rom. Please help meee.
Im running vista ultimate
the official tmobile rom latest version
wifi driver not loaded on my htc dash
Hello, I am stuck with this issue. I tried several roms and uspl but nothing happens. I installed 6.0, 6.1 and 6.5 rom versions, no wifi.
I really need help on this since I use this phone to get connected.
Please you can write me so I can see what I have to do to fix this wifi problem.
[email protected]
thanks!
my friend has this same problem it was an easy fix he wasnt running the batch file, are you sure your flashing right?
Bupahs,
Can you please help. I have read this several time and still no luck with WiFi driver. Mine still says driver not loaded. I am new and jus can not figure it out. I have flashed Ookba's 6.5 several time along with the patch.
Thanks
HEEy the same for me, pleas help us!
and microWlan doesn't work in any Roms i tested...
Bupahs said:
wifiinit.lnk must be in the windows startup folder, or the drivers wont load this has been covered and a forum search would have shown you that
Click to expand...
Click to collapse
yes this worked! thank you. i accidentally deleted it when trying to increase startup times. putting this file back in the startup folder got my wifi up and running again. tnx again.
Important - Read First!
First of all you must know that everything you do is on your own risk. Your device was not designed to run GNU/Linux or Android and that's why you shouldn't expect everything to be perfectly safe. If you don't want any troubles then simply don't tamper with your phone. On the other hand, installing Rhobuntu is probably less dangerous than installing alternative ROM's, because it doesn't touch your ROM and runs completely from the SD card. If something goes wrong and the system would hang up, you always can remove the battery and boot into Windows Mobile. Still, we can't guarantee you anything and we won't be liable for any damage that might happen to your device. If you don't accept this, don't install Rhobuntu.
At the moment two problems are known to occur when using Rhobuntu. They are, however, not Rhobuntu specific and may also occur when using Android.
1- After booting back into WinMo, you can't install or run unsigned apps. This problem probably has something to do with the way haret kicks WinMo out of the RAM. It also seems to occur only in combination with the use of Exchange Server. The only known solution at the moment is Hard Reset. Some users also reported that it can be fixed by using Visual Studio 2008. Check out this threads:
o Not digitally signed with a Trusted certificate/ Activesync keeps UNINSTALLING!
o Program... is not digitally signed with trusted certificate. HELP!
2- Since we still have no proper battery charge indicator working, you might not notice that your battery is completely drained. Deep discharge is, however, not good for batteries and may in some cases even damage them. Here is a thread dealing with this problem when running Android
o Android killed my USB connection, please help
The majority of Rhobuntu users doesn't face these problems, but just in case, you've been warned.
WIKI http://wiki.xda-developers.com/index.php?pagename=RhodiumUbuntu
WEBSITE https://sites.google.com/site/rhobuntu/
This build by Walter79 and the Rhobuntu team:
Rhobuntu 9.04 19.09.2010
changelog:
- zimage update (Xandroid Build 16/09)
- sphone 0.04 (thanks AmiPro)
- 3G scripts update (thanks AmiPro)
- sound works partial (thanks to phhuson) !!! run /sdcard/ubuntu/playwav2 after boot !!!
- alsaplayer added
Download:
Link1: http://www.megaupload.com/?f=RWDJWUN0
Link2: http://rhobuntu.4shared.com
Debian Squeeze Test 19.09.2010
For more information please look at this post http://forum.xda-developers.com/showpost.php?p=8186181&postcount=1208
Download:
link1: http://www.4shared.com/dir/n-2ObqP_/pro2-debian.html
Old Build (27/06/2010)
*http://www.megaupload.com/?f=RWDJWUN0
*http://rhobuntu.4shared.com
Old Build (13/05/2010)
*http://www.megaupload.com/?f=RWDJWUN0
*http://rhobuntu.4shared.com
Old Build (14/04/2010)
*part one:http://rapidshare.com/files/375930803/Jaunty_14_04_2010.7z.001 MD5 77430e728bb17277e671cc55ae03161f and part two: http://rapidshare.com/files/375939439/Jaunty_14_04_2010.7z.002 MD5 523589000dcd5d1dcea668bbe51253af
* http://rhobuntu.4shared.com
* http://www.megaupload.com/?f=RWDJWUN0
Old Build (11/04/2010)
* http://rs427.rapidshare.com/files/374730149/Jaunty_11_04_2010.7z
* http://rhobuntu.4shared.com
* http://www.megaupload.com/?f=RWDJWUN0
Old Build (10/04/2010)
*http://rapidshare.com/files/374138895/Jaunty_10_04_2010.7z
*http://rhobuntu.4shared.com
Pretty cool idea, keep us posted!
Definitely an awesome idea, and one I had been thinking about myself since my original Touch Pro days. An embedded version of Linux should run great on these devices. Hopefully momentum will grow surrounding this.
thats very interesting. any pictures of this running? maybe things can be pulled from android.
THANKS!!!! downloading now!
tried it on my Touch Pro 2 (AT&T Tilt2), No luck. Started to boot, Complained about /etc/init then poof reboot after 7 seconds. Am I missing something.
aq3e said:
tried it on my Touch Pro 2 (AT&T Tilt2), No luck. Started to boot, Complained about /etc/init then poof reboot after 7 seconds. Am I missing something.
Click to expand...
Click to collapse
Did you change the mtype in the sartup script to the tilt2, the one i used is set for the rhod100, i hope that helps. Is anyone else's not working btw?
Help!
I extracted all the files on to a newly formatted 2GB card.
Ran haret and everything ran fine. Bit 'interesting' navigating round the screen but got there in the end.
However, since rebooting my phone back into WM I cannot run any unsigned programs such as haret that worked fine before.
The error says "The file blah cannot be opened either it is not signed with a trusted certificate..."
Any idea what's changed and how I can get my phone back to how it was?
R.
dicko99 said:
I extracted all the files on to a newly formatted 2GB card.
Ran haret and everything ran fine. Bit 'interesting' navigating round the screen but got there in the end.
However, since rebooting my phone back into WM I cannot run any unsigned programs such as haret that worked fine before.
The error says "The file blah cannot be opened either it is not signed with a trusted certificate..."
Any idea what's changed and how I can get my phone back to how it was?
R.
Click to expand...
Click to collapse
Wierd, my winmo works find, minus the calibration issue, it's brilliant, we need some linux Devs to look into this. as a windows user, i have no idea on what to do
Thanks (All we need now is win XP )
Badwolve1
I think something got corrupted/overwritten on my phone...
I cannot run any unsigned apps whether they are installed on the storage card or internal memory.
I cannot even install new apps! When I run the cab file, I get the usual "This program is from an unknown publisher..." and when I select yes for continue it immediately comes up with "Installation of blah was unsuccessful."
Time for a hard reset? I'd really prefer not to if anyone can suggest a better way of getting back to how it was.
R.
dicko99 said:
I think something got corrupted/overwritten on my phone...
I cannot run any unsigned apps whether they are installed on the storage card or internal memory.
I cannot even install new apps! When I run the cab file, I get the usual "This program is from an unknown publisher..." and when I select yes for continue it immediately comes up with "Installation of blah was unsuccessful."
Time for a hard reset? I'd really prefer not to if anyone can suggest a better way of getting back to how it was.
R.
Click to expand...
Click to collapse
did you install anything recently, could try uninstalling it
dicko99 said:
I think something got corrupted/overwritten on my phone...
I cannot run any unsigned apps whether they are installed on the storage card or internal memory.
I cannot even install new apps! When I run the cab file, I get the usual "This program is from an unknown publisher..." and when I select yes for continue it immediately comes up with "Installation of blah was unsuccessful."
Time for a hard reset? I'd really prefer not to if anyone can suggest a better way of getting back to how it was.
R.
Click to expand...
Click to collapse
try installing SdkCerts.cab
http://forum.xda-developers.com/showthread.php?t=554240
the cab is included with the rhodium keymapper zip file. (keymapper app is worth installing as well )
sdkcerts won't install. It has the same problem as other cabs where it prompts to say the program is from an unknown publisher and when I tap Yes to continue it still fails with "Installation of SdkCerts.CAB was unsuccessful."
Tried booting it up on my Verizon TP2 and all it does is run haret and then freeze.
Thanks for putting this together, sebbo90. It boots nicely, and actually performs quite well on my Tilt2. I hope some of the developers take notice of this project and consider fixing the major usability issues like the front keys and the display calibration.
After the first boot I cant get the GUI to run anymore. Removing the directory from the SD and uploading a fresh copy fixes it for one boot only. After that it just hangs at command line.
spdweb said:
After the first boot I cant get the GUI to run anymore. Removing the directory from the SD and uploading a fresh copy fixes it for one boot only. After that it just hangs at command line.
Click to expand...
Click to collapse
How did you even get it to boot?
EDIT: Do you think it will not boot for me since you all are using GSM and i am using a CDMA phone? Some settings may need to be changed i guess. I have been messing around but no luck.
spdweb said:
After the first boot I cant get the GUI to run anymore. Removing the directory from the SD and uploading a fresh copy fixes it for one boot only. After that it just hangs at command line.
Click to expand...
Click to collapse
I had this problem what i did to fix it was to was to do a full reformat on my sd card (not a quick one) this then helped and now it boots everytime. Hope this helps
sebbo90 said:
Did you change the mtype in the sartup script to the tilt2, the one i used is set for the rhod100, i hope that helps. Is anyone else's not working btw?
Click to expand...
Click to collapse
If the mtype needs to be changed, what should it be instead of the default 2292, forgive my ignorance.
EDIT: must be a fluke, it booted now, did not change a thing. Re-extracted the ubuntu rar and shoved it back on the SD and booted. Great Job. All we need now is calibration to get started.
sebbo90 said:
I had this problem what i did to fix it was to was to do a full reformat on my sd card (not a quick one) this then helped and now it boots everytime. Hope this helps
Click to expand...
Click to collapse
I got it working now. It was the directory structure I was using. I spent about 2 hours last night working on the calibration issue. If I could get that working it would be sweet. Tried a newer version of haret and tweaked the startup.txt a bit but the calibration still goes out of range.
On a brighter note, the calibration works fine when booting xdandroid with haret though it is a manual calibration there is hope anyway.
Hi, as title. I can get almost everything work except 3g network(hspda).
I tried many version of radio rom. and now stay on newest which is 1.71.09.01.
with others, have extra problems.
is there other way to solve this problem?
I really want enable my 3g internet.. Orz
where do you live. what provider do you have
hi,
I still got the same problem.
I already posted in this thread
forum.xda-developers.com/showthread.php?t=693820
but there was no solution so far
I tried different android images from donut to eclair. currently I run polymod 2.1g.
with both I got no mobile network while WLAN works fine.
I tried different radio-version - at the moment 1.71.09.01
I also tested 2 different SIM-Cards from two different providers.
1. Reseller from T-Mobile Germany
2. Reseller from Vodafone (also Germany)
I have not flashed my mobile - I run Android from SD
dwmz said:
hi,
I still got the same problem.
I already posted in this thread
forum.xda-developers.com/showthread.php?t=693820
but there was no solution so far
I tried different android images from donut to eclair. currently I run polymod 2.1g.
with both I got no mobile network while WLAN works fine.
I tried different radio-version - at the moment 1.71.09.01
I also tested 2 different SIM-Cards from two different providers.
1. Reseller from T-Mobile Germany
2. Reseller from Vodafone (also Germany)
I have not flashed my mobile - I run Android from SD
Click to expand...
Click to collapse
Make sure you have 3G enabled under windows mobile. If it's disabled, android will only use 2g networks.
Edit.
Wait i might have jumped the gun. Are you saying that you cannot use mobile internet at all or just 3G?
Maybe your provider/providers data under Access Point names is incorrect?
Hi. I live in Taiwan. and go with Taiwan Cellur.
I have 3G enabled under WM, and I use the method as "NoMoRootFS Instructions for NAND".
I use [Myn’s Warm Donut RL5] with 1.7.1 NBH
You said APN. when I click APN , nothing shows up.
-Arturo- said:
Make sure you have 3G enabled under windows mobile.
Click to expand...
Click to collapse
under WM I have no problems, so it should be enabled there
-Arturo- said:
Wait i might have jumped the gun. Are you saying that you cannot use mobile internet at all or just 3G?
Maybe your provider/providers data under Access Point names is incorrect?
Click to expand...
Click to collapse
yes, I cannot use mobile internet at all. it does not show the available speed in the titlebar (H/3G/...) and it does not connect to mobile internet. browser just says it has no connection.
with wifi enabled everything is fine.
but maybe I have jumped the gun in claiming that I got the same problem than the thread owner... but I thought he has no mobile internet at all, too?
@hitakeane
with donut/1.6 I also had no APN-Entries in the menu and even the provider-list was empty. but with 2.1 this is working.
but mobile internet is not working for me with none of the constellations.
- not with donut and manual APN
- not with eclair and predefined APN
- not with eclair and manual APN
what I was thinking about this morning is: my phone had a netlock for D1. but I entered the official unlock-code from my provider (the phone is older than two years). But could it be that there is any lock left crashing the party?
hitakeane said:
Hi. I live in Taiwan. and go with Taiwan Cellur.
I have 3G enabled under WM, and I use the method as "NoMoRootFS Instructions for NAND".
I use [Myn’s Warm Donut RL5] with 1.7.1 NBH
You said APN. when I click APN , nothing shows up.
Click to expand...
Click to collapse
Go to Access point name in settings invoke the settings menu and press add new access point. You should find all the required data on your gsm provider network.
Sent from my HTC Kaiser using XDA App
dwmz said:
under WM I have no problems, so it should be enabled there
yes, I cannot use mobile internet at all. it does not show the available speed in the titlebar (H/3G/...) and it does not connect to mobile internet. browser just says it has no connection.
with wifi enabled everything is fine.
but maybe I have jumped the gun in claiming that I got the same problem than the thread owner... but I thought he has no mobile internet at all, too?
@hitakeane
with donut/1.6 I also had no APN-Entries in the menu and even the provider-list was empty. but with 2.1 this is working.
but mobile internet is not working for me with none of the constellations.
- not with donut and manual APN
- not with eclair and predefined APN
- not with eclair and manual APN
what I was thinking about this morning is: my phone had a netlock for D1. but I entered the official unlock-code from my provider (the phone is older than two years). But could it be that there is any lock left crashing the party?
Click to expand...
Click to collapse
Have you tried kallt kaffe's latest eclair build? Both 3g and 2g connections work for me on that build.
Sent from my HTC Kaiser using XDA App
-Arturo- said:
Have you tried kallt kaffe's latest eclair build? Both 3g and 2g connections work for me on that build.
Click to expand...
Click to collapse
Haven't tried until now. But it's running on my Kaiser now. But mobile internet is not working for me.
I really like to know what this is. Can't be that tricky when it is working for most of the people except for me and few others. Hm...
I asked google many times for the correct apn-setting. But I always end up with the same 2 settings that I have tried both.
dwmz said:
Haven't tried until now. But it's running on my Kaiser now. But mobile internet is not working for me.
I really like to know what this is. Can't be that tricky when it is working for most of the people except for me and few others. Hm...
I asked google many times for the correct apn-setting. But I always end up with the same 2 settings that I have tried both.
Click to expand...
Click to collapse
I think that in a andboot folder you should have boot log file(or something like that) Look for errors in this file and post them here maybe someone will be able to help you. Also I remember reading somewhere a while ago that it's best to have one of newer winmo roms( 6.5, 6.5.1, 6.5.3, 6.5.5) when running android using haret.
I have seen a HTC Desire from a colleague this morning (also Android 2.1). Right above the submenu "Mobile Networks", where I can configure APNs and so on, he has a checkbox to enable/disable mobile network at all. This checkbox is missing for me. Should it be there?
-Arturo- said:
Look for errors in this file and post them here maybe someone will be able to help you.
Click to expand...
Click to collapse
from bootlog incl. installation:
Code:
- mke2fs: cannot determine if /sdcard/andboot/system.img is mounted
- mke2fs: cannot determine if /sdcard/andboot/data.img is mounted
- Fixing Permissions on files
chown: /data/app_s: No such file or directory
chmod: /data/app_s: No such file or directory
chown: /system/bin/su: No such file or directory
chmod: /system/bin/su: No such file or directory
chown: /system/init: No such file or directory
chmod: /system/init: No such file or directory
chown: /system/etc/init.d: No such file or directory
chmod: /system/etc/init.d: No such file or directory
sh: 2: unknown operand
- mount: mounting /data/sysfiles/su on /system/bin/su failed: No such file or directory
from normal boot:
Code:
- Free space in FSInfo block (245760) not correct (229370)
Fix? yes
Next free cluster in FSInfo block (19674) not free
Fix? yes
- sh: 2: unknown operand
- mount: mounting /data/sysfiles/su on /system/bin/su failed: Too many levels of symbolic links
OT:
-Arturo- said:
...it's best to have one of newer winmo roms( 6.5, 6.5.1, 6.5.3, 6.5.5)...
Click to expand...
Click to collapse
what I don't understand: what has WinMo to do with Android. Ok, it is installed in NAND, but I thought it is not running either?
hi I had a problem simular to this took me days to figure out a temp fix, if your running haret/win mob rather than nand, if you connect to the internet/3g before you start haret, it sometimes picks up 3g ok.
eyupwolf said:
if you connect to the internet/3g before you start haret, it sometimes picks up 3g ok.
Click to expand...
Click to collapse
doesn't seem to work for me, tried it some times. will give it a try with another build later...
but this part of your sentence is even more interesting for me:
eyupwolf said:
hi I had a problem simular to this took me days to figure out a temp fix, if your running haret/win mob rather than nand
Click to expand...
Click to collapse
you think it could be that the problem is gone when I flash Android to nand?
so the only thing preventing me from flashing is the not working mobile internet. if that was working I would make android my every day operating system for the next time.
maybe i'll give flashing a try later if this solves the problem.
the only thing I'm not sure about is if I understood it right how to come back to my shipped rom.
I got the update from 6.0 to 6.1 from T-Mobile (mda-vario.exe), I started that one and copied all the files from Windows-Temp-folder to an other place. In this folder there is a RUU_signed.nbh, is this a full rom I can flash to go back to WM 6.1?
To get me right - I'm not asking how to do this - I just want to know if this file should be a full image that I can use as backup or if this is just an update-file.
I think it is always a full image, right?
(can't find german t-mobile rom in wiki - so I hope I can use this)
hi, I set APN and it works.
though it's quite unstable.
any ideas to improve it? thanks all.
another question.
I remembered I saw at somewhere about low disk space.
I installed some software and ran out of disk,yet I have a 16G micro sd.
how should I do with this? thanks.
I'll keep on searching.
dwmz said:
OT:
what I don't understand: what has WinMo to do with Android. Ok, it is installed in NAND, but I thought it is not running either?
Click to expand...
Click to collapse
Well I'm just repeating what I've heard. Since you run android using HAret from WINMO then the version of Winmo might have something to do with your problem.
But yeah go ahead and try NAND it might solve the issue.
dwmz said:
the only thing I'm not sure about is if I understood it right how to come back to my shipped rom.
I got the update from 6.0 to 6.1 from T-Mobile (mda-vario.exe), I started that one and copied all the files from Windows-Temp-folder to an other place. In this folder there is a RUU_signed.nbh, is this a full rom I can flash to go back to WM 6.1?
To get me right - I'm not asking how to do this - I just want to know if this file should be a full image that I can use as backup or if this is just an update-file.
I think it is always a full image, right?
(can't find german t-mobile rom in wiki - so I hope I can use this)
Click to expand...
Click to collapse
The rom files you copied may be just an update, however since it was a 6.0 to 6.1 upgrade I expect it'll be a full stock rom, one way to tell would be to place the NBH file on SD card, rename to KAISimg.nbh, enter bootloader, ( power+camera), and look at what it says it will update, a full update will include OS, RADIO, SPL and possibly SPLASH.
You do not need to continue the update, just pull the battery, or press dpad, it will cancel the flash, don't press the power button tho, because then it will flash it
Another rough guide would be file size, a full 6.1 rom is around 100MB or so.
If you choose to go Nand, remember to unlock your SIM pin before flashing, also make certain you have installed HardSPL, just in case
ok, I was hoping for an answer like 'you stupid noob, there are no update-roms, every rom is a full rom'
That would have made it much easier
But your answer was nearly as helpful, thank you zenity.
- filesize is 99MB (seems to be fine)
- it says it will update RADIO_V2, BOOTLOADER, SPLASH1, OS (should be all)
- in wiki the download-link for NL t-mobile-rom goes to the t-mobile-site. So I interpret the NL-rom to be a full one. So german could be a full one, too
To be sure I dumped my own device so I can try to reconstruct this to a nbh-file if the other rom won't work
- HardSPL is already installed (I flashed some radios before)
- SIM pin is already unlocked, too (didn't work with PIN for Haret so I had to unlock)
That's enough backing for me - otherwise I got a good reason to buy a new device
Thanks to all helping me up to this point.
I'll give NAND a try later this day and post some feedback.
ok, flashed it yesterday and mobile network works like a charm.
only thing is, menu item "Mobile Network" is still missing so I can't disable mobile network. but by using a widget for home screen I can en-/disable mobile network (without changing apn)
flashing was really easy - thanks to all doing such a great job in bringing Android to Kaiser.
Also thanks to all helping me in this thread.
hitakeane said:
hi, I set APN and it works.
though it's quite unstable.
any ideas to improve it? thanks all.
Click to expand...
Click to collapse
How you do that.?
Now,I can't connect to 3G Network.
Android was working perfectly ok with a 3G connection, but the new build isn't connecting. Any help? I didn't see anything in the FAQ.
I uninstalled the CAB from WinMo and deleted excess files off the microsd card.
Any idea on what's going on?
AVakil said:
Android was working perfectly ok with a 3G connection, but the new build isn't connecting. Any help? I didn't see anything in the FAQ.
I uninstalled the CAB from WinMo and deleted excess files off the microsd card.
Any idea on what's going on?
Click to expand...
Click to collapse
Is the force cdma option enabled in your startup? This only applies if you are on a CDMA carrier, obviously.
Also, don't use MGJDroidUtil... it has been known to screw up the startup.txt, I thought they were updating it tho... Haven't heard anything about it so just stay away from it...
Thanks for the tip regarding not using the launcher. I have noticed that startup.txt getting corrupted.
The force CDMA is enabled in my startup. I am on Sprint.
same....
I have the same problem. Force CDMA is checked. The BLAZN and default releases were my first attempt at this when audio support was added. Both of those tested and worked as expected. So that's two of us so far.
BTW I told myself I'd donate once some great minds got audio working. Is it best to donate on the main page or to any other specific party?
lip008 said:
I have the same problem. Force CDMA is checked. The BLAZN and default releases were my first attempt at this when audio support was added. Both of those tested and worked as expected. So that's two of us so far.
BTW I told myself I'd donate once some great minds got audio working. Is it best to donate on the main page or to any other specific party?
Click to expand...
Click to collapse
AVakil said:
Thanks for the tip regarding not using the launcher. I have noticed that startup.txt getting corrupted.
The force CDMA is enabled in my startup. I am on Sprint.
Click to expand...
Click to collapse
To both of you... you may want to format & start over. lip008, you said "force cdma is checked" - that sounds like you're using MGJDroidUtil, because the startup.txt is a text file... you have to make sure the force cdma command is in the cmdline section.
Oh and for donations, I'd say the general XDAndroid Donation page is sufficient
I'm on GSM (T-Mobile), and I had the same issue (not the BLAZN build, the regular one)
Ok, how about APN settings? sukru, others, have you checked those?
Honestly I haven't had to add the APN manually for several builds, but maybe there's a regression in the new build.
As always, make sure your rootfs, zImage/modules are up to date.
Heres the solution if you are on sprint
Boot into windows mobile and connect to pc so you can access the files in the andboot folder on your sd card. .
or (the purpose of this is so you can edit your STARTUP.TXT using notepad)
You can take out your SD CARD and put it in a card reader and do this too.. as long as you are in windows mobile..
DO NOT DO THIS IN ANDROID..
Once you get access to the SD CARD files.. go into the ANDBOOT folder..
locate STARTUP.TXT and edit it with notepad
locate the long line of commands that starts with "Set cmdline"....
read the entire line and somewhere in the middle you will find a part that says..
force_cdma=0 (remove this part only)
and make sure you have this at the end.... htc_hw.force_cdma=1
NEXT: SAVE YOUR FILE.. AND HERES THE IMPORTANT PART..
***** BOOT WITH HARET.EXE***** NOT WITH THE MGJDroidUtil program...
THIS WORKED FOR ME.. and if any of the mods here want to add to this.. please feel free to clarify..
In lamens terms... On cdma network sprint only
THERE IS A CORRUPT ENTRY IN THE STARTUP.TXT that needs to be removed..
EDIT this entry using notepad while not booted up in android.
the entry needs to be removed mentioned above..
DO NOT USE: MGJDroidUtil to start android.. USE FILE EXPLORER.. AND start
HARET.EXE..
hope this helps..
MINE READS AS FOLLOWS:
set cmdline "lcd.density=240 msmts_calib=0x9f.0x39a.0x35c.0x78 7x00.a11=500 msmvkeyb_toggle=off pmem.extra=1 gsensor_axis=2,1,3 pm.sleep_mode=2 acpuclock.oc_freq_khz=716800 rel_path=andboot hw3d.force=1 physkeyboard=rhod400 htc_hw.force_cdma=1 "
lancevs, I appreciate then enthusiasm, but I don't think that would have any effect on GSM guys.
However, using MGJDroidUtil can still screw up anybody's startup.txt, regardless of the type of phone/radio... so he is correct in that fact:
DON'T USE MGJDROIDUTIL.EXE!!!!
Edit - didn't even think about it but sukru - do you have this force_cdma statement set to 1? For us CDMA guys it's required, but it probably will break you GSM guys if it is enabled... So check that out.
Yes for clarification
MY POST SAYS " FOR SPRINT USERS ONLY" at the TITLE...
GSM users, this does not apply..
I am on sprint and spent a good part of yesterday trying to figure out why i had no service.. I am on SPRINT which is a CDMA network..
arrrghhh said:
lancevs, I appreciate then enthusiasm, but I don't think that would have any effect on GSM guys.
However, using MGJDroidUtil can still screw up anybody's startup.txt, regardless of the type of phone/radio... so he is correct in that fact:
DON'T USE MGJDROIDUTIL.EXE!!!!
Edit - didn't even think about it but sukru - do you have this force_cdma statement set to 1? For us CDMA guys it's required, but it probably will break you GSM guys if it is enabled... So check that out.
Click to expand...
Click to collapse
Will check again tonight. Android was getting better each time, then it suddenly went down for me.
Hey guys. I had been running an early August (pre sound) release of Blazn, and everything had been fine. Today I decided to upgrade to get sound and 3D support, and every time I boot into Android it shows no signal, and shows I'm in airplane mode, and it will not let me turn the radio on.
I'm using a Sprint TP2, and I followed the instructions for earlier in the thread, but still no go.
Here's the line from my config file:
Code:
lcd.density=240 msmts_calib=0x9f.0x39a.0x35c.0x78 msmvkeyb_toggle=off pmem.extra=1 gsensor_axis=2,1,3 pm.sleep_mode=2 acpuclock.oc_freq_khz=716800 hw3d.force=1 physkeyboard=rhod400 htc_hw.force_cdma=1
Is there something wrong in it? I am launching Haret directly from TotalCommander File Explorer. Same problem if I use the config/startup utility.
Also, to install the latest version, I deleted the andboot and android folders on my SD card, then installed via cab.
That line looks correct, perhaps you should post your entire startup.txt.
Or just start with a clean build - wipe everything Android related and do a fresh install. The new startup utility is pretty slick, just be sure you check force cdma in the advanced section.
Seems to be random. About 30% of the time it will work, the other 70% of the time "no service" and no way to turn on the radio.
shawndoc said:
Seems to be random. About 30% of the time it will work, the other 70% of the time "no service" and no way to turn on the radio.
Click to expand...
Click to collapse
Well, perhaps you shouldn't use the update utility at all. It has been updated so it shouldn't corrupt the startup.txt, but I had issues with it... so personally I prefer to just use haret & modify the startup.txt manually.
I am launching Haret directly, see OG post.
shawndoc said:
I am launching Haret directly, see OG post.
Click to expand...
Click to collapse
Start with a clean build. Don't touch the startup utility, because you said you had previously. It's been known to corrupt the startup.txt, even these new builds I had my startup.txt go to 0 bytes.
hi I am having the same problems cant get android to connect with sprint on the tp2. I am no expert but have become very good at using windows mobile as a user not a developer so all i know is i downloaded a cab file that was haret version 9 28 it came with a little icon labeled android project when i launch it i get to a screen that lets me make some advanced setting and check for updates before and choose my phone model. It says aka sovereinty at the bottom. I have tried to boot without forcing cdma and it does not connect and when i choose force cdma it seems likes its kinda connecting but keeps getting a error message and then i force close and it automatically tries again. If i boot wiithout force cdma the i can connect via wifi but that works but seems to also disconnect after a few minutes, though that is not my concern for now. I tried with the sim and without. and have updated twice so i am know on 10 4. anybody that get help would be appreciated. I love my tp2 with windows mobile but am curuios to play with android being that sprint wont let me unless i change my plan and make me pay double. not interested because my tp2 works great now and has everything i need.
thanks
hi there
i just managed to install android onto a HTC "Kaiser" TyTn2.
everything i need seems to work fine except sound and wifi.
i installed RLS15 from http://forum.xda-developers.com/showthread.php?t=759894
using KaiserCustomRUU.exe
now there seems to be no sound. i called a number, and i hear nothing at all. i tried pressing speaker, and same no sound. vibrates working though. i also tried pulling the vibrate tab but it didnt work. still no sound.
about wifi, i have a Ad-Hoc network from my computer (which i can connect to from my ipod touch 3g - iOS4), but even after turning Wifi on in settings, it just doesnt seem to see my network....
btw i got no "welcome to android" or set up or anything... i did hold the DPad
any help?
I'm not sure but try out another Radio http://forum.xda-developers.com/showthread.php?p=9807696#post9807696 <---- Here
Flash it with HARDSPL or just using CustomRUU when in the tri-color screen.
I could be wrong but that's what I'm guessing
Wi-Fi... Wich kernel did you use?
Try out http://forum.xda-developers.com/showthread.php?p=9807696#post9807696 Post 118
And use the Androidupdate I attached, It's the one from Liquid wich should fix the Wi-Fi
Let us know if it fixed it
(God i had to edit it a million times before i did it right )
calls do definately go out. i called someone, i coudnt hear anything, and they called me back.
What do you mean by "Welcome To Android" ?
i read in some website that the first screen when booting android for the first time is Welcome to Android
Gaura Mohana said:
i read in some website that the first screen when booting android for the first time is Welcome to Android
Click to expand...
Click to collapse
In some builds, when you boot Android, it gives this kind of tutorial on how to use your phone (Wich has as title "Welcome to full android on Kaiser" for example), time and date settings and connect to Google account, It's possible that it isn't in the one you use
Don't worry about it, the welcome to android doesn't show when u press D-pad, the D-pad is to get into the menu when ur kernel is booting (the one with black background and white letters)
The menu is to install your system, make backups, clear dalvik and others
ok... but what do i do now about the sound? (and the wifi if posibble)
Gaura Mohana said:
ok... but what do i do now about the sound? (and the wifi if posibble)
Click to expand...
Click to collapse
Sound=New Radio
Wi-Fi is probably androidupdate
[SOUND]
Go to http://forum.xda-developers.com/showthread.php?t=393182
Scroll down until you see this: KAISER Radios These Radios were ripped from Kaiser WM6.1 ROMs.
Pick a radio and download it.
HARDSPL IS NEEDED FOR THE RADIO!
Extract the file and change the name from the NBH file to KAISIMG.NBH if the name is something else.
Copy KAISIMG.NBH onto the root of your sdcard and plug your sd card into the phone.
Hold down the camera button and turn the device on or reset it.
When you see a tri-colored screen, release the camera button.
When you see a blue text with something like RADIO (i guess) press the power button (just 1 little press, no long pressing)
The device will now update your RADIO, when finished just reset it.
Now reinstall your Android version by holding down the D-center button when asked, then selecting Install System and make it clear data.
[Wi-Fi]
Copy the androidupdate.tgz into your Andboot folder
Reboot the phone and press D-center button when asked
Choose the option to install update
Wait for it to finish and just press quit to boot Android
OMG DUDE!! thank you so much
Gaura Mohana said:
OMG DUDE!! thank you so much
Click to expand...
Click to collapse
no problem
hope it works
i just managed to put the KAIS_RADIO_ONLY_1.71.09.01.nbh (which i renamed to KAISIMG.NBH) and i put it on the root after a couple of hours figuring out how to make the phone show up in explorer
i tried starting exactly as you told me, but it boots directly to android - no tricolor. it worked fine before i installed android. so what do i do now?
Gaura Mohana said:
i just managed to put the KAIS_RADIO_ONLY_1.71.09.01.nbh (which i renamed to KAISIMG.NBH) and i put it on the root after a couple of hours figuring out how to make the phone show up in explorer
i tried starting exactly as you told me, but it boots directly to android - no tricolor. it worked fine before i installed android. so what do i do now?
Click to expand...
Click to collapse
I don't think there's another way, just, turn phone off, hold camera button in while pressing the power button once
Release the camera button after you see the colored screen
http://www.youtube.com/watch?v=bVMeZyuIMls
Doesn't show much more than I already said
Did you put hardspl on it anyways?
Thanks... What i managed to do was to simply get into the tricolors by holding power+home, then i connected to computer, and SPL'ed from CustomRUU. it worked, and sound is working. i tried your way but it woudnt detect my .NBH. thanks anyways
but where can i get a androidupdate.tar for the wifi for?
btw quick point, but my camera seems to work!!!! i remember reading that the camera WONT work on android. (it didnt work before installing the latest radio)
Thanks for the file. i just tried installing the liquid update from this post, and all i get is error under wifi (before wifi would turn on - but it kept on searching and found nothing). i did install a old update before this. could that have messed it up?
i also have a problem with USB mounting. I click turn on USB storage, and it works randomly. it works 1 time - doesnt work 10... replkuggin and stuff doesnt work. as in "Android Phone" is showing in Eject, but nothing is showing in explorer
EDIT
-----------------------
I just re-installed android and now installed the liquid update.
NOW wifi turns on, but it just scans (has been scanning for 5 minutes)
my ipod touch sees the network immediately.
Gaura Mohana said:
Thanks for the file. i just tried installing the liquid update from this post, and all i get is error under wifi (before wifi would turn on - but it kept on searching and found nothing). i did install a old update before this. could that have messed it up?
i also have a problem with USB mounting. I click turn on USB storage, and it works randomly. it works 1 time - doesnt work 10... replkuggin and stuff doesnt work. as in "Android Phone" is showing in Eject, but nothing is showing in explorer
EDIT
-----------------------
I just re-installed android and now installed the liquid update.
NOW wifi turns on, but it just scans (has been scanning for 5 minutes)
my ipod touch sees the network immediately.
Click to expand...
Click to collapse
Hmm can you tell me wich kernel you are using? 2.6.32?
Did you use the guide on Atools to make your nbh files?
Guide: http://forum.xda-developers.com/showthread.php?t=783514
Gotta go take exam right now so I'll be looking for this afterwards.
And since it's 06:24 here in the morning, we have a bit of a time issue I think.
I actually dont know what version i have, but i got it from some post on this forum, and it was the latest, and i did use atools.
I found this post http://www.google.com/support/forum/p/android/thread?tid=3b250c94811ca5df&hl=en
I am trying to use a ad-hoc network too, and i dont have any other type of wifi to try.
thanks
good luck with the exams(s)
EDIT- i have 2.6.32.9
Gaura Mohana said:
I actually dont know what version i have, but i got it from some post on this forum, and it was the latest, and i did use atools.
I found this post http://www.google.com/support/forum/p/android/thread?tid=3b250c94811ca5df&hl=en
I am trying to use a ad-hoc network too, and i dont have any other type of wifi to try.
thanks
good luck with the exams(s)
EDIT- i have 2.6.32.9
Click to expand...
Click to collapse
It could be that it's not possible to connect to an ad-hoc network, I've got no idea about that.
Hope someone else will post here and answer that.
U should really try connecting with a normal Wi-Fi network
Go onto the street and look for appartments or houses with open networks just to test?
i live in a small town..... no one here has internet let alone wifi....
aww that's balls
got no idea on how to try it then