Develop Bugs

Phone getting stuck a low clock speeds

Every once in a while when I wake my phone up, the clock speed stays at what it gets set to when the screen is off. The profiles seem to not work at this point until I reboot. I'm running stable cyanogenmod. Is there any way to remedy this?
Sent from my HTC Vision using XDA App

Anybody got anything?
Sent from my HTC Vision using XDA App

I thought that I had this problem on my cliq... turns out that the profiles were switching but the widget wasnt updating...could that be your issue?

Durkbeef said:
I thought that I had this problem on my cliq... turns out that the profiles were switching but the widget wasnt updating...could that be your issue?
Click to expand...
Click to collapse
No. I did have that problem on my G1 but on this phone when it says it's running at 300 Mhz, it is. Apps open slower, linpack is low. It's definitely getting stuck somwhere.
Sent from my HTC Vision using XDA App

I wkuld recomend auto detecting speeds to make sure its got the right info for your kernel. Then i would reboot the phone. Also try turning the widget off. If your still stuck uninstall setcpu and start frrom scratch. I would reflash my kernel at this point as well.
Sent from my HTC Vision using XDA App

shortlived said:
I wkuld recomend auto detecting speeds to make sure its got the right info for your kernel. Then i would reboot the phone. Also try turning the widget off. If your still stuck uninstall setcpu and start frrom scratch. I would reflash my kernel at this point as well.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
Thanks man. I'll give all those a try.
Sent from my HTC Vision using XDA App

[Q] HELP!?!?!?!?!?!

what do i do? i was flashing cm 7.03 and now its just stuck on the screen where the blue arrow goes around and around. what do i do? any help is appreciated.

happymfeet said:
what do i do? i was flashing cm 7.03 and now its just stuck on the screen where the blue arrow goes around and around. what do i do? any help is appreciated.
Click to expand...
Click to collapse
Take out the battery. Put it back in and start your phone again. If the same happens repeat the battery pull but this time hold down on the volume bar and THEN press the power button to restart your phone. After it starts up in bootloader select recovery by moving the volume bar and then hit the power button again. This will bring you back to recovery where you can flash the rom again or restore your backup.

EdKeys said:
Take out the battery. Put it back in and start your phone again. If the same happens repeat the battery pull but this time hold down on the volume bar and THEN press the power button to restart your phone. After it starts up in bootloader select recovery by moving the volume bar and then hit the power button again. This will bring you back to recovery where you can flash the rom again or restore your backup.
Click to expand...
Click to collapse
Thanks im restoring my backup now. I thought i had bricked my phone or something. i just rooted my phone so this was my first ROM that i was flashing so I wasn't sure of what to do.

I know this going to sound stupid, but can anybody point me to a guide or video on how to flash roms? Im new to all this so I dont want to mess anything up.

happymfeet said:
I know this going to sound stupid, but can anybody point me to a guide or video on how to flash roms? Im new to all this so I dont want to mess anything up.
Click to expand...
Click to collapse
YouTube is your best friend sir. I wish I had one to direct you to, but a Google or YouTube search with do you just fine.
Sent from my HTC Vision using XDA Premium App

happymfeet said:
I know this going to sound stupid, but can anybody point me to a guide or video on how to flash roms? Im new to all this so I dont want to mess anything up.
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=jYOzWLVnBuc&feature=fvst
Note: Start @ 3:15. In the video clockwork mod is black/green but that's just because its an older version, the newer version is black/orange. All the steps are still the same though.
Sent from my HTC Vision using XDA Premium App

eioous said:
Note: Start @ 3:15. In the video clockwork mod is black/green but that's just because its an older version, the newer version is black/orange. All the steps are still the same though.
Sent from my HTC Vision using XDA Premium App
Click to expand...
Click to collapse
Thanks, appreciate it.
Sent from my HTC Vision using XDA App

happymfeet said:
Thanks, appreciate it.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
Also keep in mind that some roms can take up to 5 minutes to load the first time. Normally (but definetely NOT always) as long as it doesn't keep reloading the boot animation, everything is fine - the rom is building your file system on your first boot.
Sent from my shiny metal G2 w/ meXdroid V3

What rom do you all think is the best? Im currently on cm 7.02 and i like it but i want to know your opinions
Sent from my HTC Vision using XDA App

Also what are
Sent from my HTC Vision using XDA App

Also what are the benefits of switching kernels? And which do you all recommend?
Sent from my HTC Vision using XDA App

if you took the time to read about kernels and what they are you would know.
but, i'm in a good mood today:
Kernels govern your cpu speed and how to scale it. Some are locked to a certain frequency set and some are made adjustable, but you have to get an app that interacts with the kernel otherwise it runs at whatever it is preset to.
SetCPU is the one I used, but I know there are plenty out there that others would recommend and swear by in a heartbeat.

mputtr said:
if you took the time to read about kernels and what they are you would know.
but, i'm in a good mood today:
Kernels govern your cpu speed and how to scale it. Some are locked to a certain frequency set and some are made adjustable, but you have to get an app that interacts with the kernel otherwise it runs at whatever it is preset to.
SetCPU is the one I used, but I know there are plenty out there that others would recommend and swear by in a heartbeat.
Click to expand...
Click to collapse
Thanks, which kernel do you have and would you recommend me getting it?
Sent from my HTC Vision using XDA App

I'm using Virtuous rom 1.02 with the advanced kernel. I clocked mine at 475-1100mhz with a low battery profile switch at 275-887 (i think).
Check your rom specific kernel to make sure it runs best for your rom. The rest is personal preference.
Sent from my Desire Z via XDA App

*sigh* Give a man a fish and he will eat all day. Teach a man to fish and he will drink beer all day.
Since you're on CyanogenMod, I recommend Pershoot's kernel (available through ROM Manager). If you're feeling bold, download Flippy's latest kernel. Since I'm running the CM-based PyroMod, Pershoot's kernel is built in.

Everytime i flash a rom do i need to flash clockwork mod recovery?
Sent from my HTC Vision using XDA App

I suggest you check out the stickies sections that has links to a bunch of very well written guides that answer all your questions. the responses you get here are going to turn ugly very fast.
Sent from my T-Mobile G2 using XDA Premium App

If you open clockwork and your current recover is the same as newest version then there is no need to reflash recovery. The only reason to reflash clockwork is if there is a newer version out.
Sent from my HTC Vision, G2, Ultra super premium awesome phone.

Set Cpu refuses to detect temperature

set cpu seems to be stuck at 25.2 degrees Celsius i have tried all the wiping and uninstalling and re-installing possible is there a fix for this or am i stuck

Try flashing an older/recent Radio.

Your desire z / g2 might not have a core temerature reader built In.
Sent from my HTC Vision using XDA Premium App

Just tried flashing radios and that did not work. Is it really possible that some g2s have core temp readers and some dont
Sent from my HTC Vision using XDA Premium App

dumraden said:
Try flashing an older/recent Radio.
Click to expand...
Click to collapse
Dude flashing a radio won't fix that. Sure wish people would quit telling others to flash a radio for everything that goes wrong on their devices.
Sent from my HTC Desire Z using XDA Premium App

Spastic909 said:
Dude flashing a radio won't fix that. Sure wish people would quit telling others to flash a radio for everything that goes wrong on their devices.
Sent from my HTC Desire Z using XDA Premium App
Click to expand...
Click to collapse
I didn't think it would work I was just really hopeful cause the temperature profiles was one of the main reasons I use setcpu. I'm just hoping its not a hardware issue cause I don't want to have to get a warranty replacement, I just got done with the whole rooting fiasco and don't want to go through that again.
Sent from my HTC Vision using XDA Premium App

Please answer

Hi,
Could someone please answer why my One X gets worryingly hot... It's running insertcoinrom and with stock kernel...
Some one help
Sent from my HTC One X using xda premium

weeo said:
Hi,
Could someone please answer why my One X gets worryingly hot... It's running insertcoinrom and with stock kernel...
Some one help
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
This might be kernel related or app related. Just have a look, at what is using your resources. I had this problem once before, and was actually kernel related.

timlambo said:
This might be kernel related or app related. Just have a look, at what is using your resources. I had this problem once before, and was actually kernel related.
Click to expand...
Click to collapse
Ok, I've thried changing kernel but my phone wot boot... it seems to like stock boot.img
P.s. I've got SenseCam 3.6 working on AOSP and JellyBean... i will change that now for the Sense 4 nd see result

weeo said:
Ok, I've thried changing kernel but my phone wot boot... it seems to like stock boot.img
P.s. I've got SenseCam 3.6 working on AOSP and JellyBean... i will change that now for the Sense 4 nd see result
Click to expand...
Click to collapse
You should remember that when you change kernel, you should always erase cache before flashing the new img, and then flash the necessary files(modules) afterwards in the recovery.
Job well done to that sense cam. I can(try) help out if you want. I can read code and look into files deeper. Just pm me if you have issues.

timlambo said:
You should remember that when you change kernel, you should always erase cache before flashing the new img, and then flash the necessary files(modules) afterwards in the recovery.
Job well done to that sense cam. I can(try) help out if you want. I can read code and look into files deeper. Just pm me if you have issues.
Click to expand...
Click to collapse
Oh. I've been missing the modules... Damn it
Sent from my HTC One X using xda premium

Still hot... I'm getting 45C battery temp
Sent from my HTC One X using xda premium

Before I was using this Rom and it was fine... Only when I reflashed it it is getting hot
Sent from my HTC One X using xda premium

I had the same problem, now i did a full wipe and went back to the viper rom with the stock kernel flashed with viperflash tool, no problem and runs smooth! Hope this helps ya
Sent from my HTC One X using XDA Premium HD app

too bad i didntsee this earlier. using viperx with faux 003b11 is super cool, browsing at 30 degrees battey. might have saved you from getting the note bro, lawl.
Press THANKS if I helped.

Desire boiling hot!

Hi,
today ive stuffed my desire into my ppcket. It was cool at first but half an hour later it was burning hot! I checked if ive opened gps or something but none. Ive also checked another pocket which contained Galaxy Ace. It was opened too but cold. Ive also got something before: google acct removed from the phone but i didnt touch it, camera went black and rom toolbox's verification failed. Does anyone know what are the possible causes and how to fix? have to take battery off. ManU kernel with Aosp gingerbread
PS ive changed kernel before in the afternoon but it didnt went hot until evening
Sent from my GT-P1000 using xda app-developers app

panpjp said:
Hi,
today ive stuffed my desire into my ppcket. It was cool at first but half an hour later it was burning hot! I checked if ive opened gps or something but none. Ive also checked another pocket which contained Galaxy Ace. It was opened too but cold. Ive also got something before: google acct removed from the phone but i didnt touch it, camera went black and rom toolbox's verification failed. Does anyone know what are the possible causes and how to fix? have to take battery off. ManU kernel with Aosp gingerbread
PS ive changed kernel before in the afternoon but it didnt went hot until evening
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
If you OC the cpu probably gouvernor got stucked at highest speed. Did it drain your battery?
Sent from my HTC Desire using flashes and thunders

nlooooo said:
If you OC the cpu probably gouvernor got stucked at highest speed. Did it drain your battery?
Sent from my HTC Desire using flashes and thunders
Click to expand...
Click to collapse
i didnt touch the clock speed and the temp went up in the evening. It does drain my battery and im sure there is no such thing as time profile oc.
Sent from my GT-P1000 using xda app-developers app

panpjp said:
i didnt touch the clock speed and the temp went up in the evening. It does drain my battery and im sure there is no such thing as time profile oc.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Probably some app remained opened and stucked gouvernor at highest speed.
Sent from my HTC Desire using xda app-developers app

nlooooo said:
Probably some app remained opened and stucked gouvernor at highest speed.
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
killed all app seems to happen after wiping battery stats.
Sent from my GT-P1000 using xda app-developers app

panpjp said:
Hi,
today ive stuffed my desire into my ppcket. It was cool at first but half an hour later it was burning hot! I checked if ive opened gps or something but none. Ive also checked another pocket which contained Galaxy Ace. It was opened too but cold. Ive also got something before: google acct removed from the phone but i didnt touch it, camera went black and rom toolbox's verification failed. Does anyone know what are the possible causes and how to fix? have to take battery off. ManU kernel with Aosp gingerbread
PS ive changed kernel before in the afternoon but it didnt went hot until evening
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Im sure i read somewhere before that the camera does not or isnt supposed to work with the manu kernel.
Sent from my HTC Desire

panpjp said:
killed all app seems to happen after wiping battery stats.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
In your signature is written that you use LeeDroid Sense rom. If it's like that you shouldn't use Manu's kernel cause it's made for AOSP roms, maybe that's the problem.

nlooooo said:
In your signature is written that you use LeeDroid Sense rom. If it's like that you shouldn't use Manu's kernel cause it's made for AOSP roms, maybe that's the problem.
Click to expand...
Click to collapse
ive changed rom to f1 aosp but forgot to change sig
Sent from my GT-P1000 using xda app-developers app

Did you try to wipe all your data? Reset to defualts? Ps. dont forget to backup your data
Sent from my HTC Desire using xda app-developers app

marineo. said:
Did you try to wipe all your data? Reset to defualts? Ps. dont forget to backup your data
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
Did a nand restore. Solved
Sent from my HTC Desire using xda app-developers app

panpjp said:
Did a nand restore. Solved
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
you could also try an app called watchdoglite
it alerts you when a certain app uses processing power above a certain threshold.