I have successfully completed the following:
1. Carrier Unlocked a Telus branded LG E900h Optimums 7
2. Connected the phone to Fido
3. Use 3G on Fido
4. Fixed broken Call Display problem
5. Tethered E900h to laptop
6. Set up Wireless Zune sync
It took some effort time to figure it all out, so I thought I would share my experience to reduce frustration that any others may encounter. Most likely, many of these steps will be similar for other WP7 phones.
Unlocking the phone
Because my local phone unlock guy was closed the day I purchased the Optimus 7, I tried instantunlockcodes.com and purchased an unlock code for $10. I received 2 codes the next day, but neither
worked. I recommend not using this website, as tech support responses were next day, and they were never able to get the code working (after 3 days).
I took the phone to my local unlock guy, who unlocked it successfully. He charged me $65.
For anyone who is trying to unlock the phone, when you insert a foreign SIM, the Optimus 7 asks you for a PIN. This is where you enter the service provider unlock code. When I tried either of
the codes that instantunlockcodes.com gave to me, it said, "SIM ERROR". After looking around on the Internet, it seems that this is the message that comes up when it's the wrong code.
Getting Data on Fido
Telephone/voicemail automatically worked on Fido. To get Data to work (ie 3G) I had to change the APN setting.
Go to SETTINGS -> Cellular -> edit apn
"edit apn" is the button at the bottom of that screen. The settings should be:
APN: internet.fido.ca
User name: fido
Password: fido
Have Data connection ON and 3G connection ON.
Internet now worked for me, including browser and Outlook. Outlook connected to Exchange flawlessly.
Incidentally, the first time I set up my phone, I set up Windows Live immediately (startup wizard), and then Outlook Exchange. My appointments from Exchange were all in bright pink.
Because Windows Live was giving me a sync error, I did a factory reset, and set up Outlook first this time. Now, my Exchange appointments are in red. No idea how to change the color, but I
prefer red. In both cases, the Windows Live account's appointments are in Blue.
Call Display and MMS
Call Display and MMS did not work. Frankly, I don't care about MMS (there is another thread on how to fix this), but Call Display is quite important.
Specifically, Call Display worked when land lines called me, but did not call when most cell phones called me. They would read, Unknown.
The solution to this was through Fido: I had to call them and change my Call Display from "Call Display with Name Display" to "Call Display WITHOUT Name Display". Evidently, this problem has
manifested in other unlocked phones, such as some Blackberries as well.
A point of interest: when I put in the original Telus SIM, the call display also did not work properly. They must have given me Call Display with Name Display as well.
Tethering and Wireless Sync
Tethering is a really handy thing for me. I use it infrequently, but it's really invaluable when I need it.
I've modified the solution that's been posted around, to be specific to Fido, but to clarify a couple of the screens, as well:
1. If you haven't already, install Zune first. While tethering is enabled, Wired Sync on Zune won't work. But Zune has wireless synch, which is way cool anyhow.
2. Set up Wireless Sync on Zune. I won't go into all the details, but basically, make sure that the phone is connected to the WiFi network, that your PC has access to the same network (it can
be hardwired, as long as it has access to the same IP subnet). If you have a guest/work router, make sure that both your phone and PC are on the same network. With your phone plugged in, run
the Wireless Sync wizard on Zune. It's painless.
3. Unplug your phone.
4. Press Phone, and dial ##634#, then press the Call button. This makes visible a hidden app called "MFG". Go to the list of all your apps, and you'll see a new icon with a hammer, wrench and
screwdriver lablelled MFG. Open it.
5. You'll be asked for a password. Enter 277634#*# -- you'll need to enter this password every time you want to go into MFG, which is a good thing, because I think you can seriously mess up
your phone if you play around in there.
5. Go to Engineer -> Port Setting
6. Select the QC COMPOSITE and validate. The phone will automatically reboot.
7. VERY IMPORTANT STEP: This is totally counter-intuitive, but you must go to SETTINGS -> Cellular and turn OFF Data Connection.
Note that once you're done tethering, you need to turn it back ON in order to use Internet on the phone.
8. Connect the phone with a USB cable.
9. Windows will automatically detect the phone, and if you're using Windows 7, will prompt you with a popup with the download link for the LG driver. It says LG CDMA driver, but it works. The
full file name is LGUSBModemDriver_Eng_WHQL_Ver_4.9.4_All.exe
10. Once the drivers are installed, click start, and type "Modem", click Phone and Modem.
11. Click Modems, double-click LGE CDMA USB MODEM, click the Advanced tab.
12. Under Extra Initialization Commands, enter:
+CGDCONT=1,"IP","internet.fido.ca"
Replace internet.fido.ca with a different provider APN, if you're not with Fido, obviously.
13. Close the Modems screen, click Start, type "Dial" and click Set up a Dial-up Connection.
14. Enter your home area code because Windows forces you to, and go to the next screen. Then enter as the dialing number:
*99#
Leave the login/password blank. Click connect -- and PRESTO! Tethered Optimus 7.
* IMPORTANT *
Once you're finished tethering, you need to turn Data Connection back on. For some reason, when Data Connection is on, tethering doesn't work. Fortunately, it's a pretty simple toggle to
switch.
I hope that this is helpful!
Thanks for the great info! Just picked up a Telus HTC Surround and was concerned about the CID issue. I'll give this a shot.
You guys paid full pop then for the telus phone?
I'm suprised it costs $65 to get it unlocked...there has to be a way to do this for free...the cheap bugger in me doesn't like to pay for such things!
Yep, paid full at Best Buy. My Samsung Galaxy S just broke last night and I need a smartphone like there's no tomorrow, heh heh. Decided to give a WP7 phone a chance this time.
Yes, I paid $499 CAD + Tax. But, I'm ahead, because I bought an iPhone 4 on renew for $250 or so and sold it BNIB for $960 a few days after release
I have an issue with Text message timing - they are coming through with times that are not the same as my time zone.
UnlockThatPhone.com only 14.99$ and after 18h they send me 2 codes and now I'm so happy
did it work?
arniman said:
UnlockThatPhone.com only 14.99$ and after 18h they send me 2 codes and now I'm so happy
Click to expand...
Click to collapse
Can you confirm if it worked? The first place I went to was instantunlockcodes.com . It was cheap and DID NOT WORK
I went to my "phone guy", who used another (expensive) unlock service, and it did work Cost me something like $50
Related
My hermes was working fine for the couple weeks I've had it, internet, internet sharing, everything. A couple days ago, the internet stopped working. I can still do calls, emails still seem to work (with exchange), sms is fine, although MMS is failing as well.
I have a 2nd 8525 and the same issues on that one too. I plugged my sim into a wing I had laying around, and voila, internet works. I tried all sorts of settings, tried surfing with wap.voicestream.com with the 216.155.165.50 or whatever proxy, etc.
I noticed on another forum that people in my area are having the same issues, but t-mobiles says the network is fine.
I am inclined to believe t-mobile on this one a bit, being that my Wing works fine... but neither of my 8525's (hermes) work...
One last note, when I boot up, I get a message saying the operator does not exist database, I just exit out the error and it WAS working fine even with that box, does it on both Hermes I have.
Any ideas!!!! Thanks. All help is really, really appreciated.
Mine stopped working temporarily yesterday, and started working again within an hour. Are you using the internet2.voicestream.com access point?
I'm using wap.voicestream.com -- but I had tried internet2.voicestream.com as well... are you using all the proxy settings with it (I HAVE the 19.99 unlimited data plan btw).
Both phones are using Schaps, so i'm considering flashing a different rom and seeing if that brings any new luck if I can't find any other help. But I have my main phone really well customized and would hate to have to do that.
What area are you in? I'm in South Florida (and on another thread, 2 or 3 other posters in south florida are having the same issues, weird)
With the unlimited data plan you should be able to use internet2 for all data and wap.voicestream for MMS. If you want I can post my configs that work, I just copied them from the T-Mobile Wireless configurator site using the Wing for my handset. Also, I'm from Northern Colorado.
RE: Internet:
I had an issue with t-mobile tZones back when they alowed it on smartphones... Then one day it just stopped working. about two weeks later, I finally got annoyed with them and called them.
They argued with me about tZones working for about 20 minutes and then finally found an internal memo about people using tZones to cruise the internet by accessing wap first, and once establishing a connection, usine pIE. So, You can't trust a phone company when it claims that their network is ok or that they ddin't cancel a part of your service without letting you know.
...BUT,
acording to them:
"216.155.165.050" FALSE INFORMATION
"216.155.165.50" TRUE INFORMATION
"Welcome to the T-Mobile Wireless Data Configurator. In a few quick and easy steps, this tool will help you configure your phone for Internet access."
Setting up the handset
Tap Start.
Tap Settings.
Tap on the Connections tab.
Tap the Connections icon.
Tap Add a new modem connection under T-Mobile Data.
Enter T-Mo WEB in the Enter a name for the connection field.
Tap to select Cellular Line (GPRS) from the Select a modem drop down list.
Tap Next.
Enter internet2.voicestream.com in the Access point name field.
Tap Next.
Tap Finish.
The new Internet profile is now configured and ready for use.
VPN
"Welcome to the T-Mobile Wireless Data Configurator. In a few quick and easy steps, this tool will help you configure your phone for Internet access.
Setting up the handset
Tap Start.
Tap Settings.
Tap on the Connections tab.
Tap the Connections icon.
Tap Add a new modem connection under T-Mobile Data.
Enter T-Mo VPN in the Enter a name for the connection field.
Tap to select Cellular Line (GPRS) from the Select a modem drop down list.
Tap Next.
Enter internet3.voicestream.com in the Access point name field.
Tap Next.
Tap Finish.
The new Internet profile is now configured and ready for use. "
"Picture Messaging (MMS) Configuration Complete
Welcome to the T-Mobile Wireless Data Configurator. In a few quick and easy steps, this tool will help you configure your phone for picture messaging (MMS).
Setting up the data account
Tap Start.
Tap Settings.
Tap on the Connections tab.
Tap the Connections icon.
Tap Add a new modem connection under T-Mobile Data.
Enter T-Mo MMS in the Enter a name for the connection field.
Tap to select Cellular Line (GPRS) from the Select a modem drop down list.
Tap Next.
Enter wap.voicestream.com in the Access point name field.
Tap Next.
Tap Finish.
Setting up the MMS profile
Tap Start again.
Tap Messaging.
Tap Menu.
Tap MMS Configuration.
Tap the Servers tab.
Tap New.
Enter T-Mo MMS in the Server Name field.
Enter 216.155.165.050 in the Gateway field.
Enter 8080 in the Port number field.
Enter http://216.155.174.84/servlets/mms in the Server address field.
Tap to select T-Mobile GPRS from the Connect via drop down list.
Tap to select WAP 2.0 from the WAP Version dropdown.
Tap OK.
Scroll to T-Mo MMS and tap Set As Default.
Tap OK.
The new MMS profile is now configured and ready for use. "
"t-zones (WAP) Configuration Complete
Welcome to the T-Mobile Wireless Data Configurator. In a few quick and easy steps, this tool will help you configure your phone for t-zones (WAP).
Setting up the handset
Tap Start.
Tap Settings.
Tap on the Connections tab.
Tap the Connections icon.
Tap Add a new modem connection under T-Mobile Data.
Enter T-Zones in the Enter a name for the connection field.
Tap to select Cellular Line (GPRS) from the Select a modem drop down list.
Tap Next.
Enter wap.voicestream.com in the Access point name field.
Tap Next.
Tap Finish.
Tap Manage existing connections under T-Mobile Data.
Tap on the Proxy Settings tab.
Tap to check This network connects to the Internet.
Tap to check This network uses a proxy server to connect to the Internet.
Enter 216.155.165.050 in the Proxy server field.
Tap Advanced...
Tap HTTP.
Enter 8080 in the Port field.
Tap OK four times.
Tap Start.
Tap Internet Explorer.
Browse to http://wap.t-zones.com.
Tap Menu.
Tap Tools and tap Options...
Tap Use Current under Home page.
Tap OK.
The new WAP profile is now configured and ready for use. "
http://tmobileuspublic.wdsglobal.com/phonefirst?phoneId=0&manufacturerId=0&ispId=&mmsId=&wapId=&contractId=235&countryId=37&networkId=90&bearerId=5&phoneId=1805&manufacturerId=41&mobileNumber=&incomingServerId=
another thing you can do is copy the contents of your extended rom on the wing onto a storage card on your new device. also copy the "config" text file so that you install the CAB files in the proper order. reset. try now, I hope this helps
S.V.I said:
another thing you can do is copy the contents of your extended rom on the wing onto a storage card on your new device. also copy the "config" text file so that you install the CAB files in the proper order. reset. try now, I hope this helps
Click to expand...
Click to collapse
Did all of the above settings, didn't do a thing. Still same connection issue. When you go to IE and enter an address, it says "connecting... locating... opening..." and just sticks on "opening" for the page, MSN Live doesn't work or anything else either. This is all strange since it was all working fine only a few days ago.
There is some magic setting or something that is making Hermes devices not work anymore while the wing still does.
I DIDNT do the extended rom thing, would you mind explaining that a little further step by step for me?
If those settings don't work it sounds to me like something is corrupted on your phone, and you may need to do a hard reset, or installing a new rom. I haven't had any issues with Schaps 4.31 since I installed it 2 weeks ago, but it sounds like you might be.
I have 2 8525's, lol... didn't work on EITHER even with a fresh install of schaps, I even tried 4.4 with win mo 6.1 just for jollies. It's really strange though and as I said, multiple people in my area are reporting this same issue at this moment.
But I just think they made changes that a certain setting or something on the hermes doesn't like since it works on the Wing.
In fact, it's quite pissing me off, lol... really frustrating.
I would call t-mobile and find out from them. my 8525 works just fine.
yeah but you are in a different part of the country, it's actually people with Kaisers (Tilt) having the issue as well... it's the TyTn and TyTn II models that just magically aren't working, and it's all south florida. Those t-mobile bastards!
But really, the freakin Wing works, what could it possibly be!!!!!
8525 in South Florida (Miami) with same issue
As always, when I have problems with my phones I turn to xda developers and viola! Answer's to my questions. My at&t 8525 internet stopped working around 8pm Thursday night (2/7/08). I have had my T-mobile sim on this phone working fine since last July with not one problem until now. I actually did call t-mobile customer service and went through all the usual treat the customer like a dummy and tell him/her to restart, take out battery, etc etc like that never occurred to me to try...DUH! Then they tell me to talk to the IT dept at my work to see about active sync settings. And of course they do not know that I AM the senior engineer in the IT dept so I get the rare privilege to inform them of this and assure them that there is NOTHING wrong with my exchange server as everyone else in the office using active sync has no problems, it is only me on T-mobile with my unlocked 8525. They then offered to transfer me to tier 2 support. Which gave me another rare opportunity to use one of my favorite lines with customer support..... "I just want to talk to someone who knows more than me". Unfortunately work took me away from the phone and I did not get a chance to continue with tier 2 support. I will take this up later today and post any resolutions if they present themselves. But I am putting my money on this forum and the incredibly talented individuals who frequent here on a resolution to this issue instead of T-mobile. Seems to me T-mobile is sending a hidden message that they possibly do not want my business anymore. Good thing my contract us up in a few months.
Thanks to all in advance!
vr24 said:
yeah but you are in a different part of the country, it's actually people with Kaisers (Tilt) having the issue as well... it's the TyTn and TyTn II models that just magically aren't working, and it's all south florida. Those t-mobile bastards!
But really, the freakin Wing works, what could it possibly be!!!!!
Click to expand...
Click to collapse
It's possible that the wing, since its a T-Mobile phone probably has some sort of network priority list the 8525 doesnt. try selecting under Phone > networks Tmobile and see if it sticks. Good luck!
Perhaps you should try flashing another radio. I used one a while back and could not get data working.
that's very interesting, as we are probably ALL using the same unlocked radio. Can you possibly point me in the right direction on how to do that?
radio version
I'm using Radio version 1.51. I will try flashing to the latest and see how that goes, but let me tell ya, looking at the new schap's rom I'm thinking I might just flash that bad boy, It looks awesome!
Seumas said:
I'm using Radio version 1.51. I will try flashing to the latest and see how that goes, but let me tell ya, looking at the new schap's rom I'm thinking I might just flash that bad boy, It looks awesome!
Click to expand...
Click to collapse
The 4.4? It's ok, I didn't notice a huge difference, and it actually seemed to run a bit slower, although I didn't have a chance to test it much.
I went to my device information, and it says radio version 1.16 - so I guess we are running different radio's and having the same issue... maybe that isn't the solution then. Could it have somethign to do with hard-spl and having it unlocked and what not?
Ok so tried 5 different radio versions, all with zero success. Ugh!!
If you are an MDA user in the US and have issues connecting to your internet and MMS:
http://forum.xda-developers.com/showthread.php?t=294573
I use this rom to fix my service. period. I just dont know how else to fix that issue.
All the other ROMs have not fixed the issues I have been having after upgrading my phone to WM6. The Rom By it self eats the batery, so Faria's Kitchen has a great little extra package in the extended rom: "Xfaria settings"
FIXED the battery drain issue.
WIZARD G3 (TMO MDA US) WM6 pro from Here:
http://forum.xda-developers.com/showthread.php?t=294573
Radio: official 2.25
IPL/SPL: 2.26
Xfaria Settings
How recent was your internet not working? And can we just install Wizard roms onto an 8525 hermes?
We are going to keep this down to 1 thread I think, we have one going pretty well on the Kaiser forum (TyTn 2) and the South Florida guys with that model are having the exact same issues.
Head over there and we can keep this all together and try and find a solution.
http://forum.xda-developers.com/showthread.php?p=1907694#post1907694
Hi, With my old TP1, I had no problems with ICS. I just got a TP2 yesterday, it's a refurb, so when I followed boo boo's tutorial on ICS with USB, under "network connection", I still get <none>, and can't choose the provider. I hard resetted, followed step by step, and still the same result. Anyone has any clue as what might be the problem? Thanks in advance
This worked for me, No need for cab or registry editor. I didn't write this and cant remember who did. Tried to find the post but couldn't. So who ever did write this THANKS because it worked for me.
Instead of hacking the registry, the phone is just set to use the AT&T ISP connection. Go into Internet Sharing, select Menu, Connection Settings, select Manage existing connections under AT&T ISP. On the next screen AT&T ISP GPRS should already be selected, tap edit.select next. The Access point name (APN) will say isp.cingular, this is the official tethering APN, change it to wap.cingular (the APN for phone internet browsing). select next. make sure user name, password, and domain are all cleared out, then select finish. Now go back to Internet sharing and all should be well. This will erase information needed to officially tether, but if you're doing this then you didn't intend to pay for it anyway. If you ever do need the username and password again, you should be able to obtain it via a simple google search or by calling customer service.
My posts are completely informational/educational. I bear NO responsibility for anyone messing up their phones or for anyone stealing (tethering without paying for it) from at&t Mobility.
sorry for the long post, just wanted to be detailed.
Ok, heres the skinny. My Fiancee got a US Cellular Touch Pro 2 off Craigslist, I flashed it and made it work on AT&T. It was working wonderfully on AT&T for a few months now, but just a few days ago, it started to freak out. It of course worked fine when I was around, but as soon as she left, it started to not work. This is exactly what she told me is happening:
"As for my phone, it still completely works except for not getting a signal. Or something. It technically says it has several bars, but it also says "Digital Roaming" where it used to say AT&T. Now that I think about it, it did say U.S. Cellular when the problem first started. When I try to send a text it just says "SMS Error" and it can't be sent. Before about an hour ago, when I tried to call someone, it just said it couldn't go through, but now it's saying crazy things like it can't connect to Verizon Wireless and I should contact my phone provider. Then there are the icons. Where usually just the notification icon pops up are now two new symbols. One of them is a tall, skinny triangle and the other is a box with a 1X in it. I can't click on them so I have no idea what they mean. Also, about half the time where the signal symbol is, instead of the regular symbol, it has the bars but also two arrows going in opposite directions."
I hope thats enough information for someone to help me (and her) out here. I rock a HTC Incredible so Windows Mobile is a whole other planet for me.
Have you tried to set it to connect to AT&T only? I've had it swap to T-Mobile (roaming) once, but that's because I forgot to set GSM Network selection to Manual.
(Slide all the way to the Settings Tab -> Wireless controls -> Phone -> Network)
It seems that you will need to set up a new modem connection for the phone to work on the AT&T network. She may have actually been using the US Cellular network all along, up until now and they have most likely caught on to it and she is now being blocked. You will have to set the handset up to use AT&T MediaNET by going into the settings and creating a new modem connection with AT&T's network name, proxy server and DNS settings for it to work right.
I know this because I have just changed one of my handsets over to SimpleMobile from AT&T and I had to set all of this up for my device to work on SimpleMobile's network.
Google around and you should be able to find the information you need to get this problem resolved, ie: network settings for MediaNET, internet and MMS.
Have fun, I know I sure did. lol
HTR
Here's some information I got straight from the HTC support site, hopefully they will get you started in the right direction but it does look as though you/she will have to contact AT&T support to get the internet set up since the MediaNET settings are hard set and non-editable. I was going to get them for you from my device but it will not even let me open the settings up to look at them.
What are the Data Network settings for my device using the AT&T Network?
The GPRS settings can be found by going to Start > Settings > Connections > Connections and then Manage my Existing Connections.
The AT&T MEdia Net settings cannot be edited.
For further assistance, contact AT&T.
What are the MMS Settings for my device using the AT&T Network?
The MMS Settings can be accessed on the device by going to Messages Tab>All Messages>Menu>MMS Options>Servers Tab. Tap on AT&T MMS or select New. Server Name: AT&T MMS
Gateway: wireless.cingular.com
Port Number: 80
Server address: http://mmsc.cingular.com
Connect via MEdia Net
Send Limit: 600K
For further assistance, contact AT&T
Hi everyone!
Just received LG Nitro HD which was bought on ebay.com (USA). As I live in Europe I can't use AT&T so I had to buy the unlock code and I did so. When I received the codes (NCK, NSCK, SPCK, CPCK, SIMCK) the Life's SIM was already in and I was doing some setup (can't remember exactly what, but not in wireless networks). So I decided do not reboot the phone and use 2945#*930#.
When I entered the code I get in the unlock menu. I pressed Network lock and the new menu popupd. I've entered the NCK and phone says that the Unlock was successful. Than I tried to press other menu items such as SIM unlock, Corporate unlock,... but without any effect.
After that I decided to continue my "exercises" and went to main screen and I didn't saw the network connection.
Than I've tried manual search, automatic search, other SIMs (from other carriers) - the only network which the phone can connect is life but connection loses in a few seconds. BT and WiFi works perfect.
I've tried to flash 10i.kdz, 10c.kdz, 10f.kdz, 18f.exe, 20c.kdz - only 10s and 18f.exe can start, others stuck on bootscreen.
Please help me how to connect the phone to other networks and make signal straight!!!
have you entered your apn settings for your carrier?
KronicSkillz said:
have you entered your apn settings for your carrier?
Click to expand...
Click to collapse
No, but they are received automatically somehow (maybe they are flashed at SIM?) for all networks I've tried. And they are correct - I've checked it on operator's sites.
Insert any sim and do a manual search. How many networks you see?
Also verify wether it is on 3G only or anything other than automatic cause in some devices it sticks even after full flashing. If that fails, best case scenario, antenna problem.
Sent from my GT-P3113 using xda premium
el_venga said:
Insert any sim and do a manual search. How many networks you see?
Also verify wether it is on 3G only or anything other than automatic cause in some devices it sticks even after full flashing. If that fails, best case scenario, antenna problem.
Click to expand...
Click to collapse
With any SIM or without any SIM, with manual or automatic search, with "2G only" set or not set it could see only the network named "life"
So I decided (the day before yesterday) to disassemble it and see what is happened inside. And I saw that some wire was not plugged but only putted on the board. I plugged it and powered on the phone - and IT HAPPENED!!! All the networks where found!!! So I've assembled it back and the problem was resolved. Sorry, I was so happy and didn't wrote about it.
The problem is decided, case is closed. Thanks for everyone for help.
rofl, yeah plugging your antenae in is kind of important
OK, I took the plunge and got one. Checked a few things out, then went for the ICS update (official AT&T, at least for now) before I got too wrapped up in it. Seems I may have forgotten to check out that the data plan worked before the update -- I think I may have had Wi-Fi on all the time. Yeah, it was a dumb mistake.
Now I cannot get any data with any application when outside a Wi-Fi zone. Not even 2G, much less 3G. No connection and no indicator at the top. Phone is working on 3G just fine.
I have AT&T, though it's an old "Smartphone Unlimited" plan. It works just fine on my LG Expo (which is 3G). The phone is supposed to be unlocked (at least until I updated it, don't know if that affected it), but I have no non-AT&T SIM with which to try it. Have made no attempt to root it or load a custom ROM.
Are there some settings somewhere that I have to change to go through my old "wap.cingular" gateway (either rooted or not)? Should I try going to a custom ROM? Back to the original software (link, please, if that's the case)?
I'm going to see if a co-worker's T-Mobile SIM works with it (voice and/or data). But is there anything else I should try? Has AT&T finally caught up with me and my old, cheap, unlimited data plan and my SIM keeps me from connecting?
There should be no issue putting in a SIM from a working phone. If you go to System Settings->About Phone->Status, what is the network status? "Unavailable"? "Unprovisioned"?
Do you have signal, just no data, or do you have no signal?
I have full phone and text service, just no data (though, oddly, it says I have used 9.92KB of data). That occurs both at my home where I connect to my microcell and elsewhere. Of course, at home, I can also use WiFi for data.
"Mobile Network State" is "Disconnected". "Mobile Network Type" is "UTMS:3." If I turn the data network off and back on, it goes to "connecting" for a while, then back to "disconnected. I did find the location where it specifies the Access Point Names and it is set to "wap.cingular" just like my old phone. But unlike my old phone, the user name and password are "not set". These are uneditable fields.
I also went to the place it allows me to select my network operator and it offered me three different "AT&T" options. Two of the three gave me a message that my SIM does not allow connection to that network. When I try to switch to one of them, I see the data indicator go through Edge, 3G, and 4G, then off.
Only other odd thing I've noted is that the serial number is all zeros. The IMEI is correct, though; and I think that's what matters.
I'm becoming more and more convinced this is a problem with my SIM and the data plan it's tied to. It is from an old EDGE-only Windows Mobile 5 "smart phone" when that meant a device without a touch screen or QWERTY keyboard and a "PDA" was something that had either of those. The "Smart Phone" data plan was half that for a "PDA" but more than for a plain phone, and that's what I'm still paying. I've been buying phones outside of the AT&T system to hang on to that inexpensive, unlimited plan; but I may have reached the end of the line with it. I definitely need to try a SIM from another 4G capable phone,. both AT&T and T-Mobile, to see where I stand.
Tiger Shark said:
I have full phone and text service, just no data (though, oddly, it says I have used 9.92KB of data). That occurs both at my home where I connect to my microcell and elsewhere. Of course, at home, I can also use WiFi for data.
"Mobile Network State" is "Disconnected". "Mobile Network Type" is "UTMS:3." If I turn the data network off and back on, it goes to "connecting" for a while, then back to "disconnected. I did find the location where it specifies the Access Point Names and it is set to "wap.cingular" just like my old phone. But unlike my old phone, the user name and password are "not set". These are uneditable fields.
I also went to the place it allows me to select my network operator and it offered me three different "AT&T" options. Two of the three gave me a message that my SIM does not allow connection to that network. When I try to switch to one of them, I see the data indicator go through Edge, 3G, and 4G, then off.
Only other odd thing I've noted is that the serial number is all zeros. The IMEI is correct, though; and I think that's what matters.
I'm becoming more and more convinced this is a problem with my SIM and the data plan it's tied to. It is from an old EDGE-only Windows Mobile 5 "smart phone" when that meant a device without a touch screen or QWERTY keyboard and a "PDA" was something that had either of those. The "Smart Phone" data plan was half that for a "PDA" but more than for a plain phone, and that's what I'm still paying. I've been buying phones outside of the AT&T system to hang on to that inexpensive, unlimited plan; but I may have reached the end of the line with it. I definitely need to try a SIM from another 4G capable phone,. both AT&T and T-Mobile, to see where I stand.
Click to expand...
Click to collapse
In the Access Point Names make sure that the profile you were talking about is selected. Or from that screen if you hit the menu button it should give you the option of entering your own APN. If you've had data working on another phone I would suggest duplicating the APN settings from it and try making a new profile.
It could be the SIM/plan you're currently on but honestly this sounds exactly like what happens when your APN settings aren't configured correctly.
Turn the phone off, remove the SIM, boot it with no SIM. Go into Access Point Names and remove all the entries. Turn it off, put the SIM back in, turn it back on. If it doesn't autocreate an entry in Access Point Names, or the autocreated entry still doesn't work, take it to an AT&T store and ask them for help.
m1batt1 said:
In the Access Point Names make sure that the profile you were talking about is selected. Or from that screen if you hit the menu button it should give you the option of entering your own APN. If you've had data working on another phone I would suggest duplicating the APN settings from it and try making a new profile.
It could be the SIM/plan you're currently on but honestly this sounds exactly like what happens when your APN settings aren't configured correctly.
Click to expand...
Click to collapse
There was no way to select the plan. So I made a duplicate of it, which did have a select button, selected it, and it now works great. Thanks so much for your help.
roothorick said:
take it to an AT&T store and ask them for help.
Click to expand...
Click to collapse
That would have ben last resort. They would have wanted to "upgrade" my data plan to something that cost more and isn't unlimited.
Your solution might have also worked, but the first one offered led me to a solution, so I never tried yours. I'll keep it in mind, though.
Tiger Shark said:
There was no way to select the plan. So I made a duplicate of it, which did have a select button, selected it, and it now works great. Thanks so much for your help.
Click to expand...
Click to collapse
Glad it worked out for you!
Sent from my SGH-I927 using xda app-developers app