While trying to solve a problem Type 1A Brick of a Trinity device http://forum.xda-developers.com/showthread.php?t=369434 (discussion for Hermes devices)
i have find a "Pof" thread which explain how enable "rbmc" command on Hermes device (Rbmc = Read Back Memory Content from the specified address)
So, i have tried to apply this on our HTC Trinity device : Works
I have modify Olipro 1.30 MFG for have rbmc enabled ----> So this Hard Spl "OliMor 1.40" is an 1.30 Olipro version + rbmc command enabled.
I raccomanded use PuTTY interface for your dump (download here : http://www.putty.org/ is an open source)
(Mtty interface can have some problem)
Example how dump memory:
task 32
rbmc xxxx 500e0000 40000 (for capture main splash)
rbmc xxxx 50140000 40000 (for capture second splah)
rbmc xxxx 50000000 20000 (for capture IPL)
rbmc xxxx 50020000 40000 (for capture SPL)
rbmc xxxx 500a0000 40000 (for capture CID,S/N, WLAN, informations)
rbmc full 50000000 7fff800 (full backup your Flash Rom 128 MB = 1 hour for have full dump)
Note: the output file "xxxx" is on your PuTTY interface; So, for build your binary file you must capture the output inside HTCS (HTC Start) and HTCE (HTC End) delimiter flags.
I have seen that "set 1e 1" and "password BsaD5SeoA" commands are not necessary.
Remember that you can use this SPL with splxploit pof tool (i have attached boths NBH and NB file format)
Again thanks Olipro and Pof
Thank you !!!
Well done! I'm sure this will be usefull for some that want a full backup or have bricked phones.
Too bad that this is only appearing now because it could have been usefull during the wlan dead eeprom investigation.
I'm agree with you !!
David
Just one advice/reminder to whoever install this. Don't flash this HSPL 1.4 from inside 1.3/1.2. Use the SSPL by Des instead.
I switched my phone to the tricolor screen with HSPL 1.3 and tried to flash this one. It came out with an error and stopped at 0%. After this I had to reflash the whole ROM because the phone didn't came out of the tricolor screen even after removing the battery.
So the right way to do it is put the phone in bootloader mode with SSPL-TRIN.exe (Download this from http://forum.xda-developers.com/showthread.php?t=293632 )
Copy to the storage card and run it.
It will place the phone in bootloader mode showing IPL-SSPL by Des 1.07.
Then run ROMUpdateUtility.exe and next next next.
After you will have the tricolor screen with the 1.4:
arpcpro said:
Just one advice/reminder to whoever install this. Don't flash this HSPL 1.4 from inside 1.3/1.2. Use the SSPL by Des instead.
I switched my phone to the tricolor screen with HSPL 1.3 and tried to flash this one. It came out with an error and stopped at 0%. After this I had to reflash the whole ROM because the phone didn't came out of the tricolor screen even after removing the battery.
So the right way to do it is put the phone in bootloader mode with SSPL-TRIN.exe (Download this from http://forum.xda-developers.com/showthread.php?t=293632 )
Copy to the storage card and run it.
It will place the phone in bootloader mode showing IPL-SSPL by Des 1.07.
Then run ROMUpdateUtility.exe and next next next.
After you will have the tricolor screen with the 1.4:
Click to expand...
Click to collapse
From Olipro 1.20 you can upload to Olipro 1.30 or OliMor 1.40. There is no problem.
I remember that only Olipro 1.30 and OliMor 1.40 SPL have a lock command that don't allowed to return back in another SPL; One solution is run SSPL-TRIN.exe from your PDA like you have descripted.
ciao nn riesco in alcun modo ad aggiornare l'hard spl nè alla 1.40 nè a versioni inferiori. sono partito da 0 cioè da primo aggiornamento. il RUU dà errore a metà della procedura disconnettendo l'AS. facendolo ripartire da un avanzamento immediato da 0% a 100% dicendo che è andato a buon fine ma in realtà non ha aggiornato nulla.
l'aggiornamento radio invece viene completato regolarmente in 10 minuti ma alla fine non si è verificato alcun aggiornamento.
ho provato sia col mtty dove mi dà un bad block che cmq nn riesce a risolvere anche dopo vari lanci, cioè il bad block rimane sempre corrotto. ho provato pure facendo partire l'aggiornamento dopo aver lanciato l'eseguibile "SSPL-TRIN" direttamente da PPC ma non ottengo alcun risultato.
l'unica cosa che riesco a fare è l'aggiornamento della ROM che incredibilmente funziona senza aver flashato nè radio nè hspl. ho messo la dmore 3.3 e va ma ripeto con radio e hspl originali.
non so + cosa provare, avete qualche suggerimento?
grazie!
Related
to restore your trinity to factory default and validate warranty download and flash this rom thi is a italian roms!!!
http://rapidshare.com/files/65452211/trinity_tutto_originale__.rar.html
this roms restore all original WM5 ipl,spl and radio, this rom remove also olipro 1.20 1.30 ecc. good for send trinity to repair on warranty
install this rom only when you are in WM5\6, do not install directly from bootloader or olipro dont delete for protection write
INSTALL:
when you are in wm5\6 run the upgrade, trinity reboot and go in multicolor screen with sign 1.07, if you get an error, no reset but only run again file upgrade
work also from SD..if you flash from SD lunch file enterbootloader.exe before lunch the file upgrade
ITA
questa e' la roms htc WM5 italiana originale HTC ma modificata per ripristinare il trinity con i settaggi di fabbrica, come appena comprato, e' utile nel caso avete installato roms,spl o ipl non ufficiali e nel caso non riuscite a togliere olipro o altri problemi simili
http://rapidshare.com/files/65452211/trinity_tutto_originale__.rar.html
questa roms ripristina WM5 radio ipl e spl originali, inoltre tale roms toglie olipro ripristinando l'originale
installate questa roms direttamente da wm5\6 e non direttamente da bootloader...altrimenti tutto torna originale ma olipro rimane a causa della protezione sovrascrittura
ISTRUZIONI
quando siete in wm5\6 lanciate il file di upgrade rispondete si all'eventuale domanda sulla sicurezza, il trinity si riavvia e vi troverete nella schermata multicolore targata 1.07 se ottenete un errore senza toccar nulla date ok e rilanciate semplicemente il file e l'upgrade continuera normalmente
funziona anche da SD...se aggiornate da SD lanciate prima il file enterbootloader.exe e poi il file di aggiornamento
hi...
wich is the factory ipl number? and the spl number?
i've istalled some udk's rom.. and now i've to restore my p3600 to the original.. where i've to look to found some information about ipl and spl numbers?
thanks
ps: i can't download your rom because i've some problems whit my internet connection, so i want to understand if i can use the original HTC rom that i've downloaded in the past
ciao, quali sono le versioni di ipl o spl originali? io ho installato le rom di udk ma ora per problemi dovrei ripristinare l'originale htc..
puoi spiegarmi come faccio a vedere quali dovrebbero essere i muneri ipl e spl
grazie
PS: ho problemi con la connesione internet e non posso scaricare la tua rom,, quindi devo capire se la rom che ho scaricato dal sito della htc in passato puo bastare..
grazie
alied said:
hi...
wich is the factory ipl number? and the spl number?
i've istalled some udk's rom.. and now i've to restore my p3600 to the original.. where i've to look to found some information about ipl and spl numbers?
thanks
ps: i can't download your rom because i've some problems whit my internet connection, so i want to understand if i can use the original HTC rom that i've downloaded in the past
ciao, quali sono le versioni di ipl o spl originali? io ho installato le rom di udk ma ora per problemi dovrei ripristinare l'originale htc..
puoi spiegarmi come faccio a vedere quali dovrebbero essere i muneri ipl e spl
grazie
PS: ho problemi con la connesione internet e non posso scaricare la tua rom,, quindi devo capire se la rom che ho scaricato dal sito della htc in passato puo bastare..
grazie
Click to expand...
Click to collapse
non vorrei sbagliare xke ora non monto la roms originale ovviamente e non ricordo perfettamente...percio dico che...IPL sicuro e' lo 0.50, SPL se non sbaglio 1.07 ma di questo non ricordo bene...se hai occasione scarica la roms sopra citata e non hai problemi
now i dont mount official roms and i no remeber perfectly but i'm sur ipl is 0.50 spl i think is 1.07
now on my device i've ipl 0.50 and spl 1.07.0000...
is possible that i've installed one unofficial rom whitout modifing the ipl adn spl numbers? if it is possible, i've no problem whit reistalling the official HTC WM5 rom... someone could help me... tanks
alied said:
now on my device i've ipl 0.50 and spl 1.07.0000...
is possible that i've installed one unofficial rom whitout modifing the ipl adn spl numbers? if it is possible, i've no problem whit reistalling the official HTC WM5 rom... someone could help me... tanks
Click to expand...
Click to collapse
yes, is possible, if you have that ipl and spl, no problem for downgrade to original roms
brain_81 said:
yes, is possible, if you have that ipl and spl, no problem for downgrade to original roms
Click to expand...
Click to collapse
thank you soooo much... i've a little problem on mi device and i've to send it to htc.. and now.. i'm starting the downgrade of my device.. it will be for a little time... official again...
I hope sincerely this is my solution i've installed a bad rom and i cannot restore my trinity , how i know when the flashing is finished ?
Help , mi p3600 tell That Romupdateutility is'nt pocket pc valid apllication ! i'm afraid my trinity is only 7days old and i can't use it
freespirit64 said:
Help , mi p3600 tell That Romupdateutility is'nt pocket pc valid apllication ! i'm afraid my trinity is only 7days old and i can't use it
Click to expand...
Click to collapse
i don't understand...simply lunch ROMUpdateUtility.exe from pc...what is the problem? you can try to flash from SD, write also in italian if you are italian in this mode i understand
non ho capito, devi solo lanciare ROMUpdateUtility.exe da PC, quale e' il problema? puoi provare a flashare da SD, se sei italiano scrivi anche in italiano cosi capisco meglio
My ROM is damaged i thing, activesinc not start in my trinity and i can't restore old rom
freespirit64 said:
My ROM is damaged i thing, activesinc not start in my trinity and i can't restore old rom
Click to expand...
Click to collapse
go in bootloader (camera+power and softreset) and see if you are in serial or in USB, if you are in USB you can install roms from PC otherwise flash from SD see here
http://wiki.xda-developers.com/index.php?pagename=Trinity_SDCardFlashing
Hi, i've some problem to restore. This rom on my trinity restore all except IPL.
I've tried by ActiveSync and SD.
All right, with another Romupdateutility i've changed so IPL:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
It's ok for warranty?
I've done this video while i was flashing a ROM on my friend's Trinity :
http://it.youtube.com/watch?v=ZFyzLO05qSc
I hope you'll enjoy it even if is in Italian language.
For me the best choice is to flash directly from mini SD.
FAST.SECURE.CRASH PROOF.
thx anyway.
Yeah. Flashing from SD is so easy, fast and very cool. No need for pc.
As i told responding to a comment in YouTube, i've done a video of what i'm used to do, i've never tried to flash from miniSD 'cause i've always at my disposal a PC
batista70 said:
As i told responding to a comment in YouTube, i've done a video of what i'm used to do, i've never tried to flash from miniSD 'cause i've always at my disposal a PC
Click to expand...
Click to collapse
Yeah right, but i thing that the most secure and fast option is to flash fromSd, Pc or not at your disposal,plus you can do it wherever you want.
Simply extract the RUU_signed.nbh found in the Zip or RAR file of your Preferite ROM and rename in TRINIMG.nbh.(only RUU_signed.nbh we don't need the other files in the zip or rar file).
so RUU_signed.nbh--->TRINIMG.nbh
put the new renamed file in your Sd (i use a 128 mb minisd from nokia N73 times).
Put the Sd in your P3600 and Put it in Bootloader mode (Power+Cam button + softreset).
The update will Sart automatically asking you to press Power button to begin flash.
SIMPLY FAST and SECURE, and you can use the same process to flash radio and SPL.just rename your radio rom in TRINIMG.nbh and do the same process above.
You don't have to mind a Crash of Xp. A thunder that take out your Electricity. The malfuction of your mini USB cable ecc ecc ecc.
ITAenso che cmq la cosa migliore è flashare direttamente da miniSD,pc o no a propria disposizione in piu l'operazione puo essere eseguita ovunque,anche su di un treno in viaggio ad esempio.
Semplicemente scaricare il pacchetto contenente la tua rom preferita.
estrarre e rinominare il file RUU_signed.nbh in TRINIMG.nbh. (ci serve solo il file RUU_signed.nbh il resto dei file non ci interessano)
quindi RUU_signed.nbh---> TRINIMG.nbh
metti il file rinominato nella tua miniSD (io uso una da 128 del mio n73).
Metti la SD nel p3600 e avvialo in Bootloader mode (tasto power+cam+ softreset).
A quel punto l'update riconoscera il file rom sulla tua SD e inizierà automaticamente l'update dopo averti chiesto di premere il tasto power.
Così si evitano pensieri di Crash di Xp. Luce che va via nel momento del flash, malfunzionamento del cavo miniUSB ecc ecc ecc.
Yes i agree with you and i already know the procedure
Hi all, I made another rom, light, only what in image down, same as last 2 posted, but lighter...
Above of all, a big thanks to *** bepe *** for all...
thanks to udk for effort
thanks elias for his patch like: autohibernate and processkiller
both for friendship...
all italian cookers that partecipate with suggestions and new ideas...
and all you that with tests, made better this rom!
about 60 Mb of free RAM
and
about 30 Mb of free Ram for programs
download here:
http://rapidshare.com/files/103078165/ervius_3_05_WM6_1_ITA_Light__build_19202_.zip
what inside:
in rom is integrated sdconfig tool: if you want install all cabs, after rom flashing, execute it, and it find all cabs, provxml, tsk present on Storage Card and its subfolder..., all cabs will be installed and you will able to choice the install folder, to execute SdConfig Tool: goto "impostazioni->sistema->sdconfig tool"
WARNING:
don't use "pocketcm keyboard" as external keyboard, it causes fast increase in size into "device.exe"m until you don't have anymore free memory on device....
I hope someone can post to the author about this bug, becouse I liked it but have this bug....
there are others goods keyboard, I can suggest "touchpal" in italian version, is shareware, but works very well, and add new, and unknown for it, words in dictionary!!!
if you want is better first of all (but not necessary!) install DES Hard SPL:
http://rapidshare.com/files/97120933/DES_Hard-SPL.TRIN_2.zip
install from windows mobile opened, the ppc stop on boot, repeat the operation, executing again "ROMUpdateUtility.exe" and after ppc remain off, soft reset and wait, now you have also DES HSPL, and then you can flash everithing you want!!
bye!
SERIAL NEED???
here the licenser, so you can use it like you want and disable the nag screen...
(you have to install this cab and execute... )
http://rapidshare.com/files/102451818/Rom_Licenser.cab
Working sip change... version 3
http://rapidshare.com/files/98489343/ervius_Sip_Selector_v3.CAB
Sd Config Tool final:
http://rapidshare.com/files/102016305/SdConfig_Tool-final.cab
(no more need autorun.exe to customize....!!!)
I obviously do not assume responsibility for any failures and / or loss of data resulting from the use of this rom.
the best rom ultralight for My italian trinity,thank you ERVIUS ;-) ciauzzz
maury
maury71 said:
the best rom ultralight for My italian trinity,thank you ERVIUS ;-) ciauzzz
maury
Click to expand...
Click to collapse
Perfettamente d'accordo. Funziona veramente tutto bene.
Una sola domanda, all'avvio delle volte mi si blocca sulla schermata con il logo "Windows Mobile".
Sarà forse che non digerisce bene Ultimate Launch.?
tatoone said:
Perfettamente d'accordo. Funziona veramente tutto bene.
Una sola domanda, all'avvio delle volte mi si blocca sulla schermata con il logo "Windows Mobile".
Sarà forse che non digerisce bene Ultimate Launch.?
Click to expand...
Click to collapse
for traducion
http://translate.google.com/translate_t?langpair=it|en
ciao,scrivi inglese perchè è un forum internazionale altrimenti chiudono il topic,magari è ultimate allora perchè io non l'ho installato e la rom è velocissima e non ne ho mai trovate di migliori in italiano e anche paragonandola a una wwe penso sia una delle piu performance.ciauzzz
Hello, write English because it is an international forum or close the topic,because it is completed then I did not installed and Rom is not fast and I never found the best in Italian and also comparing it to a wwe I think it is one of more performance.ciauzzz
maury
Hi ervius,
I flashed yesterday the lite version. It works very well, IMHO better than the FE edition.
Thanks for all hard work you have done.
Ciao
Tom
Light version = more P3600 velocity or what?
...is there a screen shot for this Rom?
Ho bisogno di aiuto ... il mio htc rodio durante il caricamento di una ROM originale HTC branded TIM (operatore italiano) esegue continuamente colore dello schermo bootloader. Dato che l'aggiornamento ha dato errore 262 .. quindi pur avendo fatto hard reset del telefono sempre riavviare bootloader modalità a schermo tricolore. Non ho fatto il cambiamento fatto spl rimasto invariato .. non è cambiata (SPL 0.008.400) .. è sostanzialmente bloccato in modalità bootloader .. cosa devo fare per ripristinarlo. Premetto che: si collega in modalità USB, ma quando cerco di installare la ROM originale da errore 262 .. Mi sono bloccato .. Vi chiedo di contribuire a scusarmi per il mio inglese non molto leale.
This is not rom development...
Go into bootloader. Plug in you're usb cable and try to flash again.
perhaps I have not explained well or did not understand me ... maybe because of my broken English ... but the phone is stuck in bootloader mode, despite the USB connection can not load any room ... resulting in error 262 please help me ..
Sounds like you don't have HardSPL, so perhaps a warranty return is in order ?
sorry...but i have htc rhodium with spl 0008400 and not 085olinex because not is possible flash
I did not ... why not let hardspl ... error 262 ... should send it to HTC? ... I have not made any modifications to the spl ... can groped something?
I can not change software because it appears error 262 I tried installing the original ROM so this problem appeared but I could not change the rom
waitech said:
perhaps I have not explained well or did not understand me ... maybe because of my broken English ... but the phone is stuck in bootloader mode, despite the USB connection can not load any room ... resulting in error 262 please help me ..
Click to expand...
Click to collapse
time and time again - the mighty power of forum search can never be ignored
http://forum.xda-developers.com/showthread.php?t=425922
if you are not sure how to proceed - return the phone under warranty, you still have stock spl
Thread moved
I moved your thread to the correct forum.
Russ
restore the original htc desire to return under warranty
Hello everyone I need your help.
I'm Italian and I bought a htc desire no brand in store ...
I enabled root permissions .. rom installing so many compliments and are all beautiful.
But I want to know if I have a problem and would like to restore the operating system of my terminal to avoid losing the warranty how?
I had read that just download the ruu.exe of my terminal and everything would be restored.
But I just made a test returns me errors 170 and 171 ...
it is also impractical to me would you kindly run by a good guide for me as an incompetent
ripristino originale htc desire per rientro in garanzia
ciao a tutti ho bisogno del vostro aiuto.
Sono italiano ed ho acquistato un htc desire no brand in negozio...
Ho abilitato i permessi di root ..installando rom complimenti sono tante e tutte belle.
Ma desidero sapere se dovessi avere qualche problema e desidero ripristinare il sistema operativo del mio terminale per non perdere la garanzia come si fa ?
Avevo letto che basta scaricare la ruu.exe del mio terminale e tutto si sarebbe ripristinato .
Ma appena ho effettuato una prova mi restituisce gli errori 170 e 171...
essendo anche poco pratico mi dareste gentilmente un buona guida da eseguire per un incompetente come me'
see the link in my sig for the 2.29.405.5 RUU - boot up phone to the android OS - connect with usb cable to pc - run the RUU (right click and run as administrator on vista/7) on the pc and follow instructions (you need to be over 30% battery)
http://forum.xda-developers.com/showthread.php?t=869048
if you are still having problems with 170 and 171 there are some references to it here: http://androidforums.com/incredible-tips-tricks/161463-ruu-error-170-171-solution-windows-7-a.html
it might be worth grabbing the latest HTC Sync app and installing that if not already
also what OS are you running it from?
I find it easier to turn the phone on holding the back button to get into FASTBOOT, then connect to the PC and run the RUU - means you can do it with non-Sense ROMs too as you don't need HTC Sync
... thanks for your reply.
my OS and 'Windows Seven home premium
I managed to install the original ROM only. zip file from the site that I've reported.
ClockworkMod v.2.5.0.1 recovery was not uninstalled
this is correct or not
Following the other guide for the exe file I can not continue to give me error