[Q] Best ROM Using Trinity as Car Navigation only - P3600 ROM Development

Hi all,
since I got myself one of those shiny new WP7 I was thinking what I should do with my loved Trinity. I am thinking of using it as a car navigation only for now (since there is no offline WP7 navi soft out there yett). So no phone, data, manilla or whatever needed just the navigation software. Since I always liked the resource hungry igo8 I would like to know if someone has a hint which ROM I should use best. I was thinking of a clean 6.0/6.1 ROM.
Another question would be if there is a way to have igo8 (or whatever other navi software) start right away after turning the phone on?
Thnks for any hints!

I'm not sure about the cleanest ROM. I see mentioned in some topics that tomme45i WM6.1 has a lot of free memory so it should load less stuff or have the plugins more optimized.
http://forum.xda-developers.com/showthread.php?t=551424
But maybe a better one would be the official WM6 Dopod ROM launched for Trinity. That one shouldn't have a lot of stuff and on the settings you can always disable the stuff that appears on the home screen (messages, appointments, clock, etc) to make it even faster.
About the startup, at least on WM6.5 ROMs you just need to copy the program shortcut from /windows/start menu/programs/iGo to /windows/StartUp/iGo .

Thanks alot for pointing me in the right direction! Going to test those you mentioned

Works like a charm

Related

Manilla2d trinity resources hog?

Hi, everyone on the forum, I was wondering if you were having trouble making manilly2d work smoothly on your trinities. My trinity becomes relatively sluggish and free memory drops pretty soon. When trying to use gps software it locks, freezes etc. Same with Opera browser.
How are your Trinities handling great looking manilla2d?
Use one of the ROMs with Manila2D cooked into. Its far better than installing it afterwards.
chalid said:
Use one of the ROMs with Manila2D cooked into. Its far better than installing it afterwards.
Click to expand...
Click to collapse
I Confirm!!!!
I was wondering if we could get Manilla running faster converting Manila2D.exe (1MB) or its dlls into module...
mosec said:
Hi, everyone on the forum, I was wondering if you were having trouble making manilly2d work smoothly on your trinities. My trinity becomes relatively sluggish and free memory drops pretty soon. When trying to use gps software it locks, freezes etc. Same with Opera browser.
How are your Trinities handling great looking manilla2d?
Click to expand...
Click to collapse
ROMS with Manila cooked in work only slightly slower, not enough to bother me at all. I think it all depends on what 3rd party software you then install on top.
The trick is either finding a Manila ROM which more or less everything you need it already (like Ervius's ROMS) or naked ROMS which have only the minimum (like Chalid's ROMS).
Also, I recommend using Mpenguin14's "M2DC (Manilla 2D Customizer)" to get rid of the Manila tabs at that the bottom that you don't really need. This reduces memory consumption and therefore improves performance. Some cooks are putting it into their ROMS, but there is a cab you can download too: http://forum.xda-developers.com/showthread.php?t=427392
Mattster.
Thanks for all the advice I allready noticed beter performance with album and audio player tab turned off but nevertheless it seems slower.
mosec said:
Thanks for all the advice I allready noticed beter performance with album and audio player tab turned off but nevertheless it seems slower.
Click to expand...
Click to collapse
I gave up on manilla and htc home. The clock can be replaced by PDC, weather by spb weather(there's probably a lighter solution though), app launcher by the start menu(people usually don't use a wide variety of apps, start menu can list the latest which will do just fine), sms/mms/calendar/tasks by the respective native plugins.
All the other apps are cute but useless, like, you already have a speed dial on the phone app, as for media just launch the respective apps.
manilla on trinity
Hi, I am happily running chalid's rom with Manilla2d - meaning that it runs correctly but can become quite slow (for example, A2DP skips if i keep wifi or other programs in the background). The problem, in my opinion, is not Manilla but...our trinity. The low amount of RAM makes any program which is consuming memory running slowly and/or lacking responsiveness. Try Igo8, for example, and plan a long route...this is true beyond manilla, and the less memory you have free, the more sluggish it becomes...
I came to the empirical conclusion that TNYYNT Roms are faster simply since he is keeping memory consumption/allocation low, and this is why Chalid's 0.8 is faster than any other manilla2d i've tried. For example, i was not able to run tomtom efficiently on ervius' rom - but it ALMOST works correctly with chalid's (which is based on TNYYNT as you know).
My conclusion: upgrade to touch HD ! it is the obvious way to improve the trinity: better screen, better CPU, better RAM....
lately i been using PDAviet ROM .44 and the manila user interface is relly fast and pleasant to use - the only think that I'm craving for is more RAM in the device
All is well if one application is running but have a few open and the sistem will complain
One thing that I see with this ROM is that if you start a memory intensive application - like opera 9 or your tube or tom tom it will close the ManilaUI temporarly and restart it automatically when you close the application so everything runs fast - but only one thing at the time
pzucchel said:
Chalid's 0.8 is faster than any other manilla2d i've tried. For example, i was not able to run tomtom efficiently on ervius' rom - but it ALMOST works correctly with chalid's (which is based on TNYYNT as you know).
Click to expand...
Click to collapse
Hi Pzucchel.
Thanks for your advice the other day on sd cards.
I have a new Kingston 4GB Micro SD (SDHC) Card coming tomorrow and going to reinstall Tomtom 6 onto it. Then I have to pick a ROM! I love the Manila 2D interface, have tried practically all of the current ROMS, but I can't have Tomtom letting me down.
When you say Tomtom ALMOST works on Chalid's, what happened? Did it come out of the program half way through a journey?
And on Ervius' Rom... were you not even able to start Tomtom?
Mattster.
I switched back to a non manilla2d rom and my trinity is flying again! Windows are opening fast and overall performance is better, igo 8 works without crashing. Manilla looks great but I'm gonna hold back for now! Bye all
64M Ram a problem, but here is a work around
pzucchel has raised the main issue- it's not the code, the ROM the M2D or iGO8. Our Trinity is only 64M RAM, and with operating system, if we have 25-27M free RAM we are lucky. Running M2D will normally eat up 10M or so more. With careful memory management it will not slow down our phone. however it will not allow to have M2D as a today plug-in and run iGO8...
Having M2D in the cooked ROM helps a bit as far as speed (not significant) but will not help in memory management. So that was the *****ing part of the post. now let's have a work around. It is not a solution- yet it will allow us to enjoy M2D and iGO8 without getting crazy, and without a need to reset the phone 7 times a day...
1. Install a naked ROM. Look for ones that allow 25M free RAM after installation. There are few of them. If they are naked+M2D and leave 20M free, it is good enough. Having M2D in the ROM means no M2D updates possible. Having M2D installed manually means lots of work and a bit slower performance- each one knows what's best for himself.
2. install SKTOOLS 4.4.1 (Buy it! it worth the investment). Optimize to maximum memory. Our good old trinity works fast enough even with this setup. Also- turn shadow services on to free RAM. Don't mess up with anything else there. We are after more free RAM ONLY !
3. Install mToday. It's a small nifty free tool, that allows the user to switch easy between today plug-ins. Set M2D on one screen, and iGO8 on the 2nd one. Assign a key for mToday so by a push of a button you can switch M2D off and get iGO8 plug in on... For the lazy ones I am attaching it.
4. Make sure the following lines are in your sys.txt in the IGO8 folder. I mean the one in main memory under program files, not the SD folder, although for recovery purposes, make them both identical:
[debug]
cache=2048
reserve_memory=1500000
[navigation]
sim_speed_factor=3
True- it still will not allow using TTS , but that is kind of pushing the limits of the phone. I could use TTS if I turn the phone off, kill 3G and GPRS, push no mail, etc. but after all if I wanted a GPS device only, I could have bought one..
5. For TomTom users- same thing - kill M2D using mToday and keep running it. I did not try TT7 but TT6 was very much an easy run on the trinity, before I moved to iGO8.
Special thanks to the cookers, current and the ones who left this forum, for their dedication, time spent for this community, and insight. I am merely a tester, and I hope this post will make some other trinity users happy campers.
Cheers
BigE
I had no problems running the WWE evirus rom with M2D and Tomtom7
Mattster_spv said:
Hi Pzucchel.
Thanks for your advice the other day on sd cards.
I have a new Kingston 4GB Micro SD (SDHC) Card coming tomorrow and going to reinstall Tomtom 6 onto it. Then I have to pick a ROM! I love the Manila 2D interface, have tried practically all of the current ROMS, but I can't have Tomtom letting me down.
When you say Tomtom ALMOST works on Chalid's, what happened? Did it come out of the program half way through a journey?
And on Ervius' Rom... were you not even able to start Tomtom?
Mattster.
Click to expand...
Click to collapse
I have no problem running tomtom7 and igo8 with chalid's 0.8rom.
but before i run igo, i have to close all running apps first.
like bigE mentioned, invest in SKTools. It's a great utility. I have its "free ram" apps as one of my shortcut. i always run it bfore i run any gps apps.
iGO8 and M2D- is it really running together?
rockuman_ex,
Yes, iGO may seem to work with while M2D is on, but, is it really? Here are some observations:
1. Choose to calculate a 1,000 mile away destination when they both are on - even with SKTOOLS I am running out of memory for iGO.
2. Have them both run, and try answering a call at the same time. Even with 1.5M reserved for 'non iGO' use in the sys.txt - most likely phone will freeze.
I have no experience with TT7. I have abandoned TT for iGO because I am travelling to destinations I could not have maps for TT in the TT6 era. I have got spolied by iGO and can't go back to TT, although I have to admit TT is making more sense for the trinity. But like all of us- I want it all...
I regretfully think that in the near future I will go with another HTC phone, waiting for AT&T to offer the HD here in the US. I have spent around $700 for the trini about 18 months ago, no realizing 64M will kill me so quick. Oh well- that is what we call experience, learning from mistakes...
BigE said:
rockuman_ex,
I regretfully think that in the near future I will go with another HTC phone, waiting for AT&T to offer the HD here in the US. I have spent around $700 for the trini about 18 months ago, no realizing 64M will kill me so quick....
Click to expand...
Click to collapse
I'd say these days, 18 months with one phone is pretty good

Hermes newbie... Sort of... =)

Hi every1!
This is my first post here on XDA and I'm here to bug you a 'lil... xD
I got Hermes maybe 10 days now and already made him sexy, specially cause of this ROM! Good job miffymiffy!
...Even if Manila isn't made for this "weak" HTC, this version here works almost perfect for me (well, how perfect can be Manila on Hermes? )...
First ROM i installed was also Manila, but my phone was sooooo slow and buggy...
I have some questions regarding this ROM.
1. On this TF2D menu, I cannot add programs/apps on the programs tab, also, people tab isn't working (I cannot add ppl to the menu). Can I do something about it to make it work?
2. I cannot manage soft buttons. Default ROM left button (i think) needs to be calendar and the right one iContacts, but I got "Phone" and "Programs" buttons which I cannot change (even with Soft key manager app)...
3. When I turn on my Hermes, it has around 19.XX MB of free RAM, but if I play around with my phone, it drops to 9MB... Why is that?
Would flashing the ROM again help to solove this things above?
Anyway, I'm glad that XDA exists otherwise I would be bored...
P.S. Do U suggest some other (better maybe!?) Manila TF2D ROM...?
Cheers everyone!
I can't help you much with the issues, but I can suggest a couple of ROMS. Josh & TAI both have light Manilla that look good. I personally don't like manilla ROMS just because they hog system resources. But check those out, they were pretty sweet.
Well yeah, I also hate Manila cause it slows down the sys, but I'm addicted to it and NEED to run it...
I simply love this kind of flash interface...

ROM: 3rd WM 6.5 ROM for hTC P3300-P3350_Artemis&Love[WM6.5 Beta 21159] 17-Feb 09 !!!

ROM: 3rd WM 6.5 ROM for hTC P3300-P3350_Artemis&Love[WM6.5 Beta 21159] 17-Feb 09 !!!
3rd rom from dheewatara-s:
http://www.pdamobiz.com/forum/forum_posts.asp?TID=200154&PN=985
http://rapidshare.com/files/199086096/Pawaj_65.7z.html
+CHOME
+ ie6
- No MMS
- PDA+radio
http://rapidshare.com/files/199080532/Pawaj_65_M2D.7z.html
+CHOME
+ M2D IPhone Style
+ ie6
- No MMS
- PDA +radio
Testing
I have installed and testing now.
The above pictures shows Program Free Memory as 16.68MB but actual is as below.
At Fresh boot Storage Free 44.44MB and Programs Free 22.63 MB
Download Link from Rapidshare with IE6: http://rapidshare.com/files/197880124/WM6_5_3rd21159.rar
Download in progressing,will flash later today & give feedback...
dioooi said:
3rd rom from dheewatara-s:
http://www.pdamobiz.com/forum/forum_posts.asp?TID=200154&PN=985
http://www.mediafire.com/?jibyejhwmmg
+ ie6
- No MMS
- PDA Part only
http://www.mediafire.com/?gjwyltz3w4o
No ie6
Click to expand...
Click to collapse
Although my Artemis shows 60 % free program memory, this ROM is still painfully slow.
i've download now n will try...
Thanks for the rom!
Like user above, runs very slow on the main menu but once in file explorer etc it's just as fast.
Time to upgrade the phone??
3rd wm 6.5 rom p3300
I have tried all 3 version of this ROM,
nice look but very very slow on my artemis.
today TITANIUM good, Honeyconbs slooooow other apll quite fast,
IGO8 breeze, tt7 slow.
I hope that some1 can make this fast than today.
it was lag & makes my phone hang... this ROM requires more RAM...
anyway thanks uploader... something new...
tested it for 20 minutes.
TOO SLOW on Artemis.
downloaded and tested for a day or so now
the titanium is better than in previous versions, seems to run smoothly and integrates well at last...good to see the clock finally making a propper appearance in there
also the first chance to play with the new honeycomb interface.
unfortunately the jury is still out on this one.
my view is that it's more of a hinderance than anything else at the moment.
This totally replaces the start menu. Click on the start button and you're taken straight into the honeycomb interface. I wasn't expecting this behaviour from it...i thought it would be more of a today plugin replacement or something, and if it's going to behave like this on new roms it needs to be
a)quick
and
b) easy for you to find your programs or settings that you want.
Personally i dont think it does this yet.
You can click and hold to bring any app into the "favourites" part of the comb, which means you can now "pin" your favourite apps...mcuh like your last used apps used to automatically appear at the top of the start menu.
Unfortunately i think finding anything more than you favourite 5 or 10 progs would quickly become a real pain in the ass.
let me give a quick random example
on a "classic" style rom, let say you want to go to the "SMS SETTINGS" app....you'll go to start , settings, hit the communications tab at the bootom and choose SMS SETTINGS
on this i'll go to start, straight into the honeycomb. From experience i know that it's not in here (which is good becuase this is now a looong page to look in) so i choose the SETTINGS cell. now all i can see is 7 cells and remember there are no tabs here anymore so this is ALL of your settings. I've got About, backlight, bluetooth, buttons , certification, and clocks and alarms. Anything else i have to start randomly scrolling and searching so i start moving downwards. Eventually find it on the 12th cell on the left That's 12 'Down clicks'. If i wanted WLAN SETTINGS or something i would have to do a lot more scrolling. Everything is alphabetically sorted which helps, but it's a 3 colum system and so you still need to read ALL of the available options and you need to know EXACTLY what that app is called (is it TOMTOM or NAVIGATION? Is it under T or N ? etc...you get the gist)
I hope they are still experimenting with this interface becuase i think it looks good and COULD, if done right, be a really nice feature for the WM6.5 system...but it still needs some fundamental work before it works well. Remember how, from the concept art, we through it would be a 2d scrolling 'intellingent' list...it's not. It's stricly up and down alphabetical.
I can't quite put my finger on what it IS that's wrong with it...but there is SOMETHING...it just takes too lonk to find what you need at the moment. Maybe it's just unfamiliarity and it'll all become clear after a few days use, after all i've had 5 years of experience with the old system...the same as lots of people switch vista and XP's interface into win2k mode becuase they know where everything is. I always plead with those gus to stick with it and learn the newer systems becuase they usually DO make sense....but this time i cant see it yet
The new lock mechanism also needs some work. they've obviously tried to emulate a slide-to-unlock mechanism without making it TOO similar to the iphone....unfortunately this means that you get the small blue slider we've all seen on the screenshots at the top-center of the screen and sliding it 1cm or 2 to either the left or right unnlocks. I personally think this gives too much scope for accidental unlocking. I mentioned in another thread a while back about how a "shake to unlock" feature would be self defeating. the point of a lock is to make sure that when the phone wakes up becuase of incomming texts or whatever the phone doesnt totally wake up and end up accidentally resetting all of your calendar appointements or calling people while it's in your pocket....you need it to be HARD to unlock accidentally, but not hard to unlock intentionally. The balance is not quite right here either, same as the honeycomb.
it's still in beta and hopefully the whole thing just needs those last few "tweaks" to the functionality and ergonomics before it too "makes sense" but right now i'm more than willing to switch back to dhee's last manilla rom....it's just easier to use. I hope i'm right and that this rom is in BETA for both reliabiliy AND functionality reasons.
theres a lot of potential, but it isn't there yet.
these comments are ALL down to the mew 6.5 system, NOT dhee's rom, which seems to have done everything it can with what it's been given. Considering the clumsyness of the new interface etc this is as good as i could hope for a 6.5 beta rom to be, and i will install his next rom without ANY hesitation.
for anyone wanting to try the new features out, this is the rom to go for, but i wouldn't blame anyone for not keeping it for too long
thanks again dhee for a great rom, i just hope you get an improved system to pass on to us next. I'll probably leave this one for another day or so to see if it grows on me, jstu like i gave XP and vista's new interfaces a chance.
he's now updated it with an M2D version, link : http://pirun.ku.ac.th/~fscinrn/Download/Pawaj_65_M2D.7z
will flash and let you know, i'm not convinced there's enough room on this rom for M2D too but who knows, he usually pulls it off well
NOTE the download is ONLY an NBH file
rom 6.5 M2D NEW
I have flashed 3 times my artemis with this ROM but always, after reboot wake up one error and auto reboot, so, for me is not working
I hope that someone can fix it.
rossomalpelo said:
I have flashed 3 times my artemis with this ROM but always, after reboot wake up one error and auto reboot, so, for me is not working
I hope that someone can fix it.
Click to expand...
Click to collapse
Same result ... And i flash once - device reboot, show me white screen, show error message and reboot again. Back to YuE WM 6.1 firmware. Waiting for stable release.
yeah, the M2D version didnt work for me....reverted back to his earlier 6.5 Beta 2 version with M2D becuase i dont think the honeycomb and titanium is quite ready yet
very very slow.. also the menu is not very much clear
d-signet said:
he's now updated it with an M2D version, link : http://pirun.ku.ac.th/~fscinrn/Download/Pawaj_65_M2D.7z
will flash and let you know, i'm not convinced there's enough room on this rom for M2D too but who knows, he usually pulls it off well
NOTE the download is ONLY an NBH file
Click to expand...
Click to collapse
This one is not from dheewatara, and was one of the first roms to include WM6.5.
So far DJ M2D WM6.5 5.0 UL is the quickest and smoothest.
i found DJ M2D WM6.5 5.0 UL to be the same speed as the 2nd rom with M2D from dheewatara, but dheewatara's rom has the newer camera version (with panorama mode) and a slightly newer rom version if i remember correctly. I'm sticking with that one for now
we beg pardon for my terrible English :-[ , I wanted hear there is version room without additional programs ( light ) plz give reference
Hi ppl,
All the links give error .... not found....
Can someone give me a positive link?
Hi any re-uploaded links?
Thanks

TouchFlo & Manila2d and screen going white questions

Hi All,
First of all BRILLIANT website ... keep the good work up guys ... please bear with me with a few question that i have no idea about. Thought i'd put this all in one thread rather than 4 different ones:
1) Does it actually matter which cab file (i don't know what you call it ExtRom? please let me know what exactly you call it so it's easier for me to search for in the future) to use with which version of OS? Currently i'm on WM6.5 Build 23004 WWE R7.1 and i think i downloaded some can file from WM6.1 or something
2) Where can i find TouchFlo for WM6.5 Build 23004 WWE R7.1?
3) I installed the HTC Manila2d on my XDA iis but can not seem to find it any where, do i need to install something else besides this to be able to view the application
4) Most of the time when the backlight goes off on my XDA IIs, i press the power button to bring the screen back up only to find that the screen has gone white and then i have to reset my XDA a couple of times ... to get it working i have to make sure that i'm constantly working on some app for a good few minutes before i leave the screen light to go off
Would appreciate if you can help me with this. Many thanks in advance.
1. yes it most certainly does. if you had upgraded to wm6.1 and tried an extrom of wm6.5 you would probably be disappointed that some of the programs like internet explorer, office or wm6.5 specific stuff wouldn't work. the extrom is a bunch of cabs to install certain programs after a hard reset. that's why you should have a look inside the extrom and maybe google some of the cab names and decide, whether you relly need them or not. for example, if you never use java, mss, or pdf documents, leave jbed, arcsoft and adobe reader out of the extrom and save a lot of space on your device. in general, the rom chef gives a link to the extrom, fitting the rom best, but i think the last official extrom, released by a chef was with xplode's 21202. that is the one you want to take for the newest internet explorer and office and other useful stuff.
2. what? touchflo in general means... nothing. there are 3 aspects of touchflo: touchflo3d (=Manila2d), touchflo cube and sometimes touchflo is also referred to, when it comes to finger friendlyness and touch scrolling.
to be short, the touch scrolling is always on in wm6.5 and it is also quite finger friendly. about the rest... forget it.
3. you know, manila 2d is sooo 2008
manila2d is, as you might know, opticly comparable to an animated version of htc home with a bunch of extra features, and also, like htc home (or the above mentioned touchflo cube) it is improving the today screen of wm6 and wm6.1 devices. it might also work on wm6.5, but for that to be even remotely possible, you have to lose the titanium home (default today screen plugin of wm6.5, with the sliding and all...) so go to start->settings->today->items and unselect windows default and then manila might work for you, which still begs the question:
why would you want manila when you can have titanium?
manila is slow & outdated (if you ever even get it to work, most versions won't do on the BA), while titanium is new, modern, highly customizable, hip, trendy and most important of all, works extremely fast on the BA.
4. ok, assuming that you already checked the backlight and power settings, that leaves a few other things to check:
- does it also do the white screen, if you press the power button in the first place, to switch it off and then turn back on?
- did you do anything in the upgrade process differing from "the book"?
- did you try a hard reset? if you just upgraded, you have nothing to lose?
even more stuff would come to mind, but first post back if any of the things are done so far.
greetz
Chef_Tony
Hi Chef Tony, mate honestly i really do appreciate taking your time and explaining this what was once all french to me. Ok i totally get the idea of ExtRoms and Cab file. So assuming that if i use one of the 6.1 cab files on a 6.5 it should work correct?
Apparently i downloaded Manila2D from this forum, installed it but that didn't work ... i went to start->settings->today->items and unselect windows default and but it comes up as blank screen (home screen) and also i could see TouchFlo as an option and when i select that it takes me back to the home screen saying "Tap here to activate TouchFlo", no matter how many times i tap, nothing happens. So correct me when i say this, this TouchFlo which was showing up on the options is actually a Manila2D app right? I saw a video last night on youtube which said TouchFlo on XDAiis (sorry but can't find the exact link to it) and it looked something like this http://www.youtube.com/watch?v=HJFBifvgSgA i mean the interface and the screen tapping.
As far as the screen is concerned, it never used to do this but since i've upgraded to 6.5 it has started to. I followed the exact same process what the book said because i'm the sort of a person who follows the book and nothing besides that ... besides i've hard rest it as well but that still did not help. Ok here's what happens (i think), when the device is battery powered, it will white screen when the device is not used for a few minutes (sleep mode or whatever you may call it) but it does not happen when it's on external power because it's always on any way.
in general an extrom from wm6.1 would work on wm6.5 flawlessly. but as mentioned before, the versions of the internet explorer and office changed dramatically. you should include the newer cabs there.
this tap here to activate touchflo is exactly the manila, and normally it should start up then, but as mentioned before, there is no guarantee, every version would work with the BA, but i had a version once, that worked in general, it was just a little slow and some features wouldn't work, which is perfectly normal. you should have a look at this thread and maybe try the versions given there: http://forum.xda-developers.com/showthread.php?t=340932&highlight=iolite
also you'll find other neat stuff there.
if you really want manila as your GUI, maybe you should try a nice wm6 or wm6.1 rom, because manila is really sucking cpu and ram, and with most wm6.5 roms those resources are optimized for titanium and even with titanium switched off, they just consume more hardware than wm6.1 for instance. it will run better then.
but your last sentence there is confusing me. what exactly do you mean, when you say white screen? is it actually showing all white, with backlight, or is it more like the display is off, a pale grey without backlight? if it is the first option, it seems there is actually a tiny problem there, could be together with manila, back in the day, when i ran it, i experienced sort of a third boot splash screen with manila installed and the device would take forever to boot up, soft resets were a major buzzkill then.
if it is the 2nd option, then it is perfectly normal and you can go to start->settings->system->power and set the device to never switch off on battery power, but instead just switch off the backlight.
last but not least (ok, i should have written this above): the video you posted!
the first 48 seconds don't show any manila stuff, that is called s2u2, slide 2 unlock a keylock app, you can download for free, from another forum member here, called A_C, on his site here: http://s2u2.ac-s2.com/ (all credit to A_C)
i wouldn't exactly count on the photo and video function to work on a BA either, as shown about 1:20
at 1:50 the youtube app is not part of manila either, but you can download something like that here: http://forum.xda-developers.com/showthread.php?t=385227 or the official one here: http://help.youtube.com/support/youtube/bin/topic.py?hl=en&topic=20991
i really wonder what the last app was, he showed, since i don't have sound at the moment, i can't tell whether he mentions it maybe, but probably doesn't matter anyway, because you are not looking for a paint clone, but for a nice GUI
hope this could bring you a little bit further in getting your device customized. let me know, whether everything worked out as planned.
Chef_Tony
Hi Chef Tony,
Trying Titanium on Xplode's v7.1 but cannot get my normal Today plugins selected - Pocket Breeze, Device lock, Comms, and a Programme Bar.
Is there an easy way to do this? (In M2D customisation you can set the Today page plugins...)
Thanks.
the titanium blocks everything else.
when you go to start->settings->today->items you see, by default, there is a list of a lot of plugins, but the only one that is checked is the titanium home, there called "Windows Default" for instance date and time is unchecked, which does not mean, you don't see the time in your today screen as a clock is also part of titanium. if you decide to work with m2d or other normal today plugins, you need to uncheck Windows default and then you will have access to the old today screen with the static, yet small, list of items. and then you have the opportunity to use all your today plugins. if you want to use titanium home and have plugins for that look for "titanium plugins" or "chome plugins".
and the plugins of titanium can be monitored, sorted and (de-)activated in "titanizer"
all those things in " " can be found in the forum, just have a look in development & hacking section or use the forum search

[PRJ] What to do with your old diamond > Navigation!

It is Time (please imagine a sad song at this point)
My diamond will be replaced in a few weeks. Something that will probably happen to most of your devices.
The newer models do everything better and faster, they look better, last longer etc. As a poor lonesome cowboy it is riding towards the sunset.
However I feel that it would be a waste to let it gather dust in a drawer.
So I am looking for things to do with our diamonds.
The reason I started this thread in the rom section is because I am looking for roms or kitchens to use on these "second life" devices.
options are:
- mp3/mp4 player. An optimised rom for media playback.
- Navigation. Use your phone as a navigation device.
I am looking for fast-boot roms, that have minimal options enabled, but offer the possibility to run navigation or mediacenter software.
so what are your suggestions for:
Roms or kitchens?
what programs to use
other mods to your phone to make it work as a new device.
my own idea for navigation device:
big battery for longer life
cable for TMC reception
car holder with power connection
very light rom. radio, bluetooth, wifi might be disabled (depending on navigation software possibilities)
install TMC driver
install GPS driver (the one that recalculates your position to correct for lag)
install navigation software that supports TMC
install maps
autoboot navigation software
I am looking for your tips on ROM and navigation software that works best/fastest. using tomtom at the moment, but that does not fit the description
i did this with my old device, just download any of the 'light' ROM's. i had to dig waaaaaaaay back to find a WM6.1 without sense or Manila.
i just installed my iGo8 software and put it in the startup folder, now the device boots quickly. and goes straight into the nav program.
hope this helps you
earni said:
i did this with my old device, just download any of the 'light' ROM's. i had to dig waaaaaaaay back to find a WM6.1 without sense or Manila.
i just installed my iGo8 software and put it in the startup folder, now the device boots quickly. and goes straight into the nav program.
hope this helps you
Click to expand...
Click to collapse
Like earni said, just grab yozgatgs kitchen and remove all the things you don`t need and you will have a fast ROM and of course a lite ROM.
All the best!
earni said:
i did this with my old device, just download any of the 'light' ROM's. i had to dig waaaaaaaay back to find a WM6.1 without sense or Manila.
i just installed my iGo8 software and put it in the startup folder, now the device boots quickly. and goes straight into the nav program.
hope this helps you
Click to expand...
Click to collapse
I am looking into igo as navigation software.
I see that there are a lot of threads about problems getting it to work on a diamond. could you share how you were succesfull?
how fast does your device boot?
sandervanzijl said:
I am looking into igo as navigation software.
I see that there are a lot of threads about problems getting it to work on a diamond. could you share how you were succesfull?
how fast does your device boot?
Click to expand...
Click to collapse
try McGuider Sygic navigation software!! It's nice, simple and has an easy-understanding interface with lot of features.
If you don't want to make your own ROM,you can download and upgrade your diamond with the gen.Y pxD-0 core version.It's only 36 mb and it hasn't got manila or something like that,it's a clean ROM....If you want,give it a try!
the gen.Y pxD-0 core version is nice, but it hasn't got quick gps. I've installed it from CAB, which I found in the Internet, but it doesn't work. Probably Diamond has special quick gps version.
I think i will go with igo, because that seems to support the TMC of the radio, with a special driver.
I think i want to add media playback support to the device.
so that would mean i need a good mediaplayer, and maybe a light weight icon launcher, so i do not have to use the windows startmenu.
what are ideas about these?
wow.. what a mean words.. "Old"
i think Diamond is not old enough for just 2 years only..
sandervanzijl said:
It is Time......The newer models do everything better and faster, they look better,
.......
Click to expand...
Click to collapse
I strongly disagree....the Diamond is the best looking device HTC ever made! but then again...i'm a woman
sandervanzijl said:
I think i will go with igo, because that seems to support the TMC of the radio, with a special driver.
I think i want to add media playback support to the device.
so that would mean i need a good mediaplayer, and maybe a light weight icon launcher, so i do not have to use the windows startmenu.
what are ideas about these?
Click to expand...
Click to collapse
A good media player is Microfi Nitrogen, quick loading, nice UI, many alternative skins including some with big buttons which makes it easy to control when driving:
you can download it from code.google.com

Categories

Resources