Develop Bugs

ERROR 150 upgrading ROM (FIXED)

when i try to upgrade ROMs (anykind, even just radio) i get:
ERROR 150: ROM UPGRADE UTILITY ERROR
This ROM Upgrade Utility does not design for your device.
Please get proper ROM Upgrade Utility and try again!
Click to expand...
Click to collapse
I used the MaUpgradeUt_noID.exe from the O2 files you uploaded. (i also tried what i think is a more recent version maupgradeut_noid_740.exe).
any idea what the problem is, and how to fix it? i've been trying different things, and different computers all day
OK HARD RESET CLEARED IT

[SGH-i780] - Fail to Upgrade from PDXHL2 to PDXIB1

Hello,
I'm having problem upgrading my phone from PDXHL2 to PDXIB1 ROM with the error message on the version thing. Totally clueless on this as I upgraded my phone to the PDXHL2 using the original ROM downloaded from SAMSUNG earlier this year...
When I trigger the PDXIB1, it gives out the error message of the Version check after I click on the Verify Device button. Any ideas, please?
Another funny thing is that when I try to reflash again my phone to the PDXHL2 (I'm using the same file that was used earlier this year), it gives me the same version check error message???!!!
Any help would be highly appreciated and thanks...

try to flash back to DXHH1 both rom and phone via mirage then reflash with PDXIB1 via Samsung loader

strange, but i think the reason could be that previously before i upgraded to PDXHL2 ROM, the version on my phone/pda is i780DXHH1... then after i flash the ROM to PDXHL2 the version is reported as i780PDXHL2... there is an extra 'P' there...
guess this might be the issue when the updater program from SAMSUNG check the version is not i780DX series anymore, but i780PDX series... thus validation for DX phone failed... zzzz maybe this could be the issue i guess... zzzz :sigh:

Try this link :http://www.samsungmobile.com/support/i780/index.jsp"

-ahtiang- said:
Hello,
I'm having problem upgrading my phone from PDXHL2 to PDXIB1 ROM with the error message on the version thing. Totally clueless on this as I upgraded my phone to the PDXHL2 using the original ROM downloaded from SAMSUNG earlier this year...
When I trigger the PDXIB1, it gives out the error message of the Version check after I click on the Verify Device button. Any ideas, please?
Another funny thing is that when I try to reflash again my phone to the PDXHL2 (I'm using the same file that was used earlier this year), it gives me the same version check error message???!!!
Any help would be highly appreciated and thanks...
Click to expand...
Click to collapse
hello,
i sent you a PM on 10.04.09 with the solution:
"hi,
you have to open the official upgraderEXE-file with a hex-editor, scroll near to the bottom of the file, there must be something like i780DXIB1. now you have to change it to i780DXHL1, save, that´s it. have fun!"

does it mean after u do that u can now update the rom tow m 6.5?

[Q] "43 main version check failed"

Hello,
It has been while for me on this site - since the i-mate days. I got an HTC desire with the latest software 2.2. I am trying to root it but it is failing with the above error message.
I downgraded it using the PB99IMG, created the goldcard, but every time I get to the step1-windows.bat it fails with the error message "43 main version check failed".
I tried the procedures several times from a couple of sources, I also tried both r5-desire-root-alt and r6-desire-root-alt but it always fails at the same point.
I also tried 2 different microSDs including the SanDisk but no success.
Can anyone help explain what this message means?
Thanks in advance.

mma said:
Hello,
It has been while for me on this site - since the i-mate days. I got an HTC desire with the latest software 2.2. I am trying to root it but it is failing with the above error message.
I downgraded it using the PB99IMG, created the goldcard, but every time I get to the step1-windows.bat it fails with the error message "43 main version check failed".
I tried the procedures several times from a couple of sources, I also tried both r5-desire-root-alt and r6-desire-root-alt but it always fails at the same point.
I also tried 2 different microSDs including the SanDisk but no success.
Can anyone help explain what this message means?
Thanks in advance.
Click to expand...
Click to collapse
I don't know about this message, but if your HBOOT is 0.80 (reboot phone with volume down key pressed to enter bootloader and then read the 3 or 4 first lines, there is your HBOOT version, something like 0.xxxxxxxxx), why don't you try unrEVOked3? Before trying it, uninstall HTC Sync, install the HTC drivers as explain in the read me or how to guide.
If it's 0.92 or 93, try this. Brother, next time please use the search function of this forum.
May the Peace be with you.

Thanks forelli,
The downgrade worked perfectly, I will try the unrEVOked3 next.
PS I have been searching the forums for that erorrs message but no luick, thanks for your help.

You're very welcome!
Sent from the Black Star using the Dark side of the Force

Installing Hard SPL from android?

hello everyone..
this morning I was intended to revert my kaiser back to WM 6.1,
I followed the instruction to put the ROM to my SD card along with KAISDIAG.nbh.
but maybe I chose a wrong rom, as the process goes, I just realize that the process was deleting my hard SPL..
now the text my 3 color display only says "SPL-1.56.0000"
but the android is still working....
so now my phone run on android without hard SPL...
could anyone help me? is it possible to install a hard SPL from android?
flashing from SD card doesn't works because I don't have any hard SPL installed..

There is no way at present to install hardspl from android, since we cannot run jumpspl, however you should still be able to flash a stock 6.1 rom using usb method.
Sent from my HTC Dream using Tapatalk

I have tried, but the process always failed with connection notification.It says that update utility cannot connect with my pda phone.
Well the problem is, flashing with usb method needs activesync connection with the computer. since microsoft activesync doesn't applicable anymore, I have no idea how to build connection with my phone. Besides, nothing seems happened every time I connect my phone with usb cable. Its just like my pc couldn't detect the device.
Should I install some kind of programs first on my pc? or am I miss some steps to make my phone detected by my computer?
I'm using windows xp by the way..

The CustomRUU still works for me if you boot the phone into SPL first (reset and camera+power buttons) then plug it into the computer and run the RUU (no activesync connection), so you should be able to flash a WM ROM, then you can sort out the HardSPL later
EDIT: Or does that only work for me because I have already got HardSPL?

yes it works..
the process goes, but only for 1 % . my phone reset itself and the notification on my pc says about invalid vender ID "this update utility cannot be used for your PDA phone, please check your update utility."
since the only stock rom that I found is .exe which is extract itself, I couldn't use The CustomRUU. Could this be the problem? or do I choose a wrong rom?
edit : I'm trying to install Factory Shipped ROM form HTC
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship
Do you know where to find stock rom for kaiser? most of the post about stock rom leads me to wiki xda, which is not available anymore.
thanks.

Not sure if these will work, but there are links to original HTC and ATT ROMs here
Also at the bottom of that post is a link to some reconstructed original ROMs
I have no idea if these will work any better than the one you've already tried, but it's probably worth having a go

thanks for the link..
I have visited that thread before, actually the 1st ROM that I tried to flash is also from that page. Both original ROMs for HTCor ATT doesn't works for my phone. But thanks to you I just realize the link about some reconstructed original ROMs.
Well, My phone is KAIS-100 which is made in Taiwan.
I guess I'll try Chinesse HTC 1.56.708.3.
I hope this one will make a progress.
-----------------------------------------
aww... still not working..
with reconstructed ROM, the process stuck at 0%, give me error [262] notification : update error. The manual said that if this kind of error occurred, I just need to do soft reset and run RUU again. I have tried several times even restart my pc first, but still not working.. any suggestion?

Try to flash radio. If you can't do it i think that you have messed up the bootloader

I can't...
the result is same, I'm trying to flash KAIS_Radinly_1701909 or KAIS_RADIO_ONLY_1710901_Custom, I got stuck in 0% with error [262]
The text in my bootloader says
KAIS-100
SPL-1.56.0000
CPLD-8
So, is there nothing else I could do if I have broke my bootloader?

No one can help me anymore? T-T
(running to the middle of the street and shout "why God, why??")
So, the lesson is :
If you are trying to flash back to windows mobile, DO NOT use factory shipped rom. Because it will modify your hard SPL and downgrade your radio version.
If the process failed and your hard SPL gone, you will get stuck in half working android without being able to flash anything, including correct your radio version, or reflash your kernel to fix your panel setting.
correct me if I'm wrong..
well, I hope my experience could be useful for you.
Thanks.

You can extract the exe file with winrar and you'll have all the files including RUU_signed.nbh
Rename it to kaisimg.nbh and copy to sdcard
Don't know if you can install from sdcard but since it's the shipped rom it might let you.

thank you salac..
I also have tried that method, using winrar to extract exe files.
but still, no luck for me..
Flashing via SD card got me stuck at loading screen, and I also tried to use custom RUU to flash the files via usb but my phone reset itself at 1% of the process and gives me error message [294] : invalid vender ID.

SOLVED
Finally
after days of yearning..
I found a suitable WM 6.1 ROM for my kaiser.
My phone is KAIS 100 HTC P4551. Usually, KAIS 100 model is for AT&T but mine is HTC branded, so that's why AT&T stock ROM won't works and my phone was originally shipped for US, that's why most of WWE stock ROMs always give me error 294.
So, basically I have to use HTC WWE ROM for US and this is really gives me hard time since HTC US website only provide ROM for AT&T.
In case you have same problem with me, I have uploaded the ROM at rapidshare
and you could find it here.
Now, I can flash a hardSPL, fix my radio version....
and flash back to android..

Vodafone V1620 (PH20B2) Struck at 6% during Upgrade

Hello
got a brand new unused Vodafone V1620 (PH20B2)
i tried to install ( nk.nbf) a windows 6.1 on my old but brand new device
at first it went through and struck at 6%
dont know what is the issue
i tried mtty
i tried removing battery removing card
tried disabling wces and tried hard soft every single effort.
cant get through 6%...
see attachments...
i know its simple problem but cant get through
neither i found those stock roms i required to re flash to stock eg 2003
Any help...?
please i have tried all tutorials, but correct direction will sort it out..

tnt4ever said:
Hello
got a brand new unused Vodafone V1620 (PH20B2)
i tried to install ( nk.nbf) a windows 6.1 on my old but brand new device
at first it went through and struck at 6%
dont know what is the issue
i tried mtty
i tried removing battery removing card
tried disabling wces and tried hard soft every single effort.
cant get through 6%...
see attachments...
i know its simple problem but cant get through
neither i found those stock roms i required to re flash to stock eg 2003
Any help...?
please i have tried all tutorials, but correct direction will sort it out..
Click to expand...
Click to collapse
Hello and Welcome,
we need a little bit more information...
Radioversion...
What do you tried in mtty?
have you successful flash WM2003?
Which rom you have tried... which flash program...
this is the refresh version of blueangel right?

thanks for the quote
tried this
RC5 23698 Multi-Rom
tried over this
MaUpgradeUt_noID
tried this as well
BA_VF_UK_14000_238_11300_Ship
tried mtty 1.41 i think so
and also in between when the phone was not passing 6% i tried to upgrade and successfully flash its latest radio i think it was 1.15
i followed the pdf..guide inside your signature..now the phone is struck and is totally lost in silver background showing usb and then serial message...
changed the pc, no luck.
tried changing windows to windows 7 from xp, installed drivers, done ..errorr 112 i think and same not been through 6%
please advise
d-two said:
Hello and Welcome,
we need a little bit more information...
Radioversion...
What do you tried in mtty?
have you successful flash WM2003?
Which rom you have tried... which flash program...
this is the refresh version of blueangel right?
Click to expand...
Click to collapse

see this error also
it comes after flashing ba_VF-UK_14000_23..
tnt4ever said:
thanks for the quote
tried this
RC5 23698 Multi-Rom
tried over this
MaUpgradeUt_noID
tried this as well
BA_VF_UK_14000_238_11300_Ship
tried mtty 1.41 i think so
and also in between when the phone was not passing 6% i tried to upgrade and successfully flash its latest radio i think it was 1.15
i followed the pdf..guide inside your signature..now the phone is struck and is totally lost in silver background showing usb and then serial message...
changed the pc, no luck.
tried changing windows to windows 7 from xp, installed drivers, done ..errorr 112 i think and same not been through 6%
please advise
Click to expand...
Click to collapse

this model..
d-two said:
Hello and Welcome,
we need a little bit more information...
Radioversion...
What do you tried in mtty?
have you successful flash WM2003?
Which rom you have tried... which flash program...
this is the refresh version of blueangel right?
Click to expand...
Click to collapse

tnt4ever said:
this model..
Click to expand...
Click to collapse
Please try my update tool in the RC5 thread...

still the same no luck
tried Update with nk.nbf file still not passing 6%
can you please advise why its mixing up...
if you can correct me with the actual update and nk.nbf files, will appreciate
d-two said:
Please try my update tool in the RC5 thread...
Click to expand...
Click to collapse

tnt4ever said:
still the same no luck
tried Update with nk.nbf file still not passing 6%
can you please advise why its mixing up...
if you can correct me with the actual update and nk.nbf files, will appreciate
Click to expand...
Click to collapse
try this WM2003 Rom...
http://www.mediafire.com/download/m4wwyntmzay/BA_WM2003_EN.rar