Develop Bugs

Hard SPL 262 Error

Hello all.
I have just bought an o2 Xda Ignito (aka HTC TOUCH DIAMOND).
I want to flash it to a cooked rom. And after reading up about it on this site, it would seem that I would need to install HSPL onto my device.
Well that is where the problem lies. I get the 262 error when trying to flash it with HSPL. I have even tried to do it the manual way (placing the SSPL onto the device, run it, then install it via my computer.
I still have no luck. I have tried this more than enough times with no joy...
I've read up on a few threads with the 262 error with no joy.
It just sticks on 0% and then the above error comes up. I can't understand why it wont work.
If you need any information let me know.
Cheers.

Hi,
What version of HardSPL are you trying to install?

R3PUBL1K said:
Hi,
What version of HardSPL are you trying to install?
Click to expand...
Click to collapse
I'm using this one
http://forum.xda-developers.com/showthread.php?t=416211
But I have tried 2 different HSPL versions.
One of them gave me the white loading screen and then it just froze
The other just gives me a black screen and stays black, although one time i did get the phone to show the % bar on the screen, but that froze on 0% too :\.
Thank you for the response.

So I presume then you tried the most common 1.4? What were the other two.
You could try this 1.93 (HERE) if not done so already.
Run this from your PC - during the process a message appears on you device screen asking to run an .exe (select yes) the the process should start. You may find that nothing appears to happen for a while, which is not the case.
Please do not do anything until you see the processed completely finished or the system error out.

R3PUBL1K said:
So I presume then you tried the most common 1.4? What were the other two.
You could try this 1.93 (HERE) if not done so already.
Run this from your PC - during the process a message appears on you device screen asking to run an .exe (select yes) the the process should start. You may find that nothing appears to happen for a while, which is not the case.
Please do not do anything until you see the processed completely finished or the system error out.
Click to expand...
Click to collapse
That is very strange, I used the 1.93 version before with no avil, this time it worked with this version! cheers

Glad it worked for you.
Happy flashing

DanMc07 said:
Hello all.
I have just bought an o2 Xda Ignito (aka HTC TOUCH DIAMOND).
I want to flash it to a cooked rom. And after reading up about it on this site, it would seem that I would need to install HSPL onto my device.
Well that is where the problem lies. I get the 262 error when trying to flash it with HSPL. I have even tried to do it the manual way (placing the SSPL onto the device, run it, then install it via my computer.
I still have no luck. I have tried this more than enough times with no joy...
I've read up on a few threads with the 262 error with no joy.
It just sticks on 0% and then the above error comes up. I can't understand why it wont work.
If you need any information let me know.
Cheers.
Click to expand...
Click to collapse
Bro you have a Diamond 2, this is your problem the Tutorial is for first Diamond.

AlexisRoj said:
Bro you have a Diamond 2, this is your problem the Tutorial is for first Diamond.
Click to expand...
Click to collapse
Where did you get the idea that he had the Diamond 2? he does not...
If you care to read the thread, you should notice that, and the issue is resolved.

R3PUBL1K said:
Where did you get the idea that he had the Diamond 2? he does not...
If you care to read the thread, you should notice that, and the issue is resolved.
Click to expand...
Click to collapse
Search in google "aka HTC TOUCH DIAMOND" and you find your answer

AlexisRoj said:
Search in google "aka HTC TOUCH DIAMOND" and you find your answer
Click to expand...
Click to collapse
There is no need for me to search - HE DOES NOT HAVE A TOUCH DIAMOND 2 - What he owns is a carrier customised Diamond (1st diamond) FFS.
See Here
and for your information this is the diamond 2 HERE
Please no more silly comments about it being a TD2

i own a htc diamond indian version. it has rom version 1.37.720.2.wwe. i downloaded the upgrade from official site. but it stops at 0‰ and gives error 262. what should i do

unable to root evo 4g with simpleroot or unrevoked

Hi all
I tried to root my evo (which had received the OTA 1.47.651.1 update already), but I've run into some problems...
I tried using the simpleroot OTA edition, but kept getting an error in step 3 where the script was unable to create a file in /data/app-cache/...
After that I tried the newly released unrevoked 3 method, which appeared to be working until near the end it rebooted the phone and said it was flashing the recovery, but the phone booted as normal and the program sat there saying it was flashing the recovery for >10min at which point I closed the program.
I was going to try one of the manual methods, but new when I boot into the HBOOT I get an error saying the main version is older, update failed. I've tried a couple different PC36IMG.zip files and all of them get the same error. And if I try to do a factory reset the phone just boots into the HBOOT screen and does nothing.
My phone can still boot normally and is usable except the camera will not turn on.
Can anyone try to help me fix my phone and get it rooted? Or at least restored to its original state?
Thanks in advance for any help!

ok scratch the camera part, after leaving the phone off for a bit and rebooting it appears to be working again... but the rest is still messed up

i had the same or similar problem because i had tried both root methods.
i got it to work with unrevoked 3 after:
1. removing pc36img.zip from the root of the SD card (apparently it'll always try to load a local image before attempting to connect to the PC)
2. uninstalling htc sync from the PC (others say this wasn't necessary, but it was definitely the step that allowed it to work successfully for me)

It turns out PDAnet also interferes with the driver accessing the evo.
Once i removed htc sync and pdanet both from my computer i was able to root my phone successfully.
not sure what the issue with simpleroot was though, but i didn't explore too deeply since unrevoked 3.1 worked now.

Man, that just saved the day for me! Thanks for the info about deleting the zip file.

hey I am having a similar proble with not being able to root. I tried all the stuff you guys suggested but it still wont work.
-i never installed htc sync or PDAnet
am i doing something wrong?

rparker85 said:
hey I am having a similar proble with not being able to root. I tried all the stuff you guys suggested but it still wont work.
-i never installed htc sync or PDAnet
am i doing something wrong?
Click to expand...
Click to collapse
Are you trying to root Android 2.2 (Froyo)
Sent from HTC Evo 4g using XDA app

Android 2.2? I need to root so I can use the setcpu app. I'm not real tech savy but I know I tried all these methods and they didn't work. Am I doing something wrong

I can not get ANY unroot method to work.

I need to return my phone because the earphone speaker is whacked out but I have spent the last couple hours trying to unroot it and NOTHING is working...
First I tried HTC Sync on my computer, and I get the Error [171]: USB Connecetion Error
Then I tried HTC sync on my bros computer (since I have unrooted using his laptop before with no problems) and I get a different error saying something about i have the wrong version of data utility updater or whatever.
I spent the last couple hours googleing both errors and looking for fixes, but for some reason I could not get any of them to work. I am as frustrated as can be rite now, and any help would be greatly appreciated....
I'd prefer some sort of "dumbed down" step by step process rather than being sent to a another link, because chances are I have tried that method already and I couldn't get it to work...
I also can not get adb shell to work. I installed the sdk, but it still wont show up...
any help from anybody will be greatly appreciated...

try applying the current over the air update. That took root away for many if I remember correctly.

did you enable USB debuging?

I tried searching for the ota's but they're not showing up.
also I am running dc 3.2 currently, which has debugging mode auto-enabled I believe.

So you tried using a stock rom from here to get your phone unrooted?
If you download one of those stock RUU roms it will be an exe file that will automatically install the rom to your phone...is this what you are saying isn't working?
Have you tried doing a full wipe/clear before running anything?

I had the same error when I was unrooting mine. I just unplugged the Evo while it still had the boot loader screen then ran the stock RUU. Worked like a charm.

yes. I tried installing the shipped RUU using HTC Sync, but sync keeps ****ting out on me and giving me errors. My only option seems to be unrooting my phone without using htc sync. But I have tried a couple of the methods e found, but none of them had detailed enough instructions for me to make them work....
I'v literally spent the majority of my day trying to unroot this damn phone and its driving me crazy.... I don't know wth the problem is.. I unrooted a previous EVO before, now it seems hopeless /:

Comrade P said:
I had the same error when I was unrooting mine. I just unplugged the Evo while it still had the boot loader screen then ran the stock RUU. Worked like a charm.
Click to expand...
Click to collapse
what do you mean?

I GOT IT
Hang tight fellow XDAers. Tutorial coming in about 20 min. I will post link in this thread when done. Took me forever to get past those errors too....

do the over the air update that is freshly released it will remove root and nand

Bang3r said:
Hang tight fellow XDAers. Tutorial coming in about 20 min. I will post link in this thread when done. Took me forever to get past those errors too....
Click to expand...
Click to collapse
In for this

starplaya93 said:
I need to return my phone because the earphone speaker is whacked out but I have spent the last couple hours trying to unroot it and NOTHING is working...
First I tried HTC Sync on my computer, and I get the Error [171]: USB Connecetion Error
Then I tried HTC sync on my bros computer (since I have unrooted using his laptop before with no problems) and I get a different error saying something about i have the wrong version of data utility updater or whatever.
I spent the last couple hours googleing both errors and looking for fixes, but for some reason I could not get any of them to work. I am as frustrated as can be rite now, and any help would be greatly appreciated....
I'd prefer some sort of "dumbed down" step by step process rather than being sent to a another link, because chances are I have tried that method already and I couldn't get it to work...
I also can not get adb shell to work. I installed the sdk, but it still wont show up...
any help from anybody will be greatly appreciated...
Click to expand...
Click to collapse
Link to my tutorial (you will need adb though): http://ip208-100-42-21.static.xda-developers.com/showthread.php?p=7471721#post7471721

I'd find you the link but I'm at work right now but someone has a fix for that error. Basically I got that error whenever I tried to run the stock RUU and when the phone had the bootloader screen up I just took out the USB cable, stuck it back in, and then ran the RUU again.
Sent from my EVO using the XDA App

Bang3r said:
Hang tight fellow XDAers. Tutorial coming in about 20 min. I will post link in this thread when done. Took me forever to get past those errors too....
Click to expand...
Click to collapse
You have no idea how much i'm looking forward to your guide. If it works then you my friend deserve a metal.

starplaya93 said:
You have no idea how much i'm looking forward to your guide. If it works then you my friend deserve a metal.
Click to expand...
Click to collapse
It's up: http://ip208-100-42-21.static.xda-developers.com/showthread.php?t=743192

This works if you're rooted and NAND unlocked.
http://forum.xda-developers.com/showthread.php?t=715915

cosine83 said:
This works if you're rooted and NAND unlocked.
http://forum.xda-developers.com/showthread.php?t=715915
Click to expand...
Click to collapse
Well...I guess I missed that one when I was tooling around, so I wrote my own. You're right. It clearly mentions needing the proper HBOOT, which I found was the key.. But it doesn't mention how to UN ROOT after you "Start Over." It's basically the same thing though...Cheers...

http://forum.androidcentral.com/htc-evo-4g-roms-hacks/19278-how-unroot-return-stock.html

Bang3r said:
Well...I guess I missed that one when I was tooling around, so I wrote my own. You're right. It clearly mentions needing the proper HBOOT, which I found was the key.. But it doesn't mention how to UN ROOT after you "Start Over." It's basically the same thing though...Cheers...
Click to expand...
Click to collapse
When I place the PC zip file on my sd card and then boot into Hboot, it fails to recognize the card.
I used simple root to root my phone and I am running the .79 Hboot.
I'm trying to follow your instructions but I am about ready to throw this god dam phone at the wall and use insurance to get another one

starplaya93 said:
When I place the PC zip file on my sd card and then boot into Hboot, it fails to recognize the card.
I used simple root to root my phone and I am running the .79 Hboot.
I'm trying to follow your instructions but I am about ready to throw this god dam phone at the wall and use insurance to get another one
Click to expand...
Click to collapse
You have the wrong H Boot. See here: http://ip208-100-42-21.static.xda-developers.com/showthread.php?p=7471721#post7471721
Should work on any .79 HBOOT in theory, but you have to change it to the .76 one before the RUU or the zip step you are having trouble with. Do Toast's step two which is found in the thread linked above.

Error [244]: Invalid model id

ERROR [244]: INVALID MODEL ID
This Update Utility cannot be used for your PDA phone. Please check your Update Utility.
N-KBKV5/67-S-VPIX556
Click 'Exit' to quit.
Click to expand...
Click to collapse
I receive this message when trying to flash to 2.6.32_VOGUIMG-320-FROYO-11-12-10.NBH using KaiserCustomRUU.exe.
I initially had Sleuth v3.0 flashed to my Kaiser (WMP 6.1) which had no problems. Since I was receiving this error message I decided to go back down to the shipped rom, but I still get this message. No trouble flashing to the shipped rom, though. I also tryed different version of HardSPL and went through the entire KaiserUnlocker.exe program. I've tried with or without the SD card in and I've tried version 2.6.25.
When I try to use the method of renaming the NBH and placing it on the SD card, it says "Loading..." for awhile and then "No Image File" briefly flashes on the screen before going back to the bootloader.
I have searched for hours trying to find an answer to this problem to no avail.
Thanks for any help.
Currently bootloader info:
Security Unlocked
KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8
Click to expand...
Click to collapse

lemminman said:
I receive this message when trying to flash to 2.6.32_VOGUIMG-320-FROYO-11-12-10.NBH using KaiserCustomRUU.exe.
I initially had Sleuth v3.0 flashed to my Kaiser (WMP 6.1) which had no problems. Since I was receiving this error message I decided to go back down to the shipped rom, but I still get this message. No trouble flashing to the shipped rom, though. I also tryed different version of HardSPL and went through the entire KaiserUnlocker.exe program. I've tried with or without the SD card in and I've tried version 2.6.25.
When I try to use the method of renaming the NBH and placing it on the SD card, it says "Loading..." for awhile and then "No Image File" briefly flashes on the screen before going back to the bootloader.
I have searched for hours trying to find an answer to this problem to no avail.
Thanks for any help.
Currently bootloader info:
Click to expand...
Click to collapse
you should try using atools to make the voguimg a kaisimg

Can't root using Unrevoked3, PLEASE HELP!!!

Hi Guys,
I have run into a strange issue where Google and searching this forum is not proving helpful.
I am trying to unroot using Unrevoked 3.3 reflash tool. I have Android 2.1 Update 1, so basically the stock build from the summer of this year.
I have hboot drivers installed
HTC Sync Uninstalled
USB Debugging Enabled
Running As Administrator
When I run the process with Unrevoked, it basically pushes the Recovery, goes into recovery, says it's waiting for a bunch of stuff, then waiting for reboot, my phone starts rebooting. It says something like, Still waiting, waiting for system to settle, and basically, the moment my phone comes back on, Unrevoked just says (very briefly, "Starting root" and Immediately switches to):
Internal erorr: am reported error starting service.
That's it, that's where it all ends, nothing further happens to my phone or in the App.
Can anyone please tell me what's going on? What am I doing wrong, am I using the right tool and etc?
Sorry for my ignorant questions, I have been an EVO guy, just coming to Inc.
Any help is much appreciated. Thank you guys in advance for your help!

Think you might have to upgrade to 2.2. But I would try #unrevokedtest on freenode first.

That did the trick, thanks doug !!!

I also had this problem, but a different solution - which might be helpful for other people happening upon this thread...
I think this happened because I changed the default install location for apps to sd card. I suspect this causes the unrevoked service (called "zyspkloit") to be installed to SD. As the SD card is unavailable immediately after boot, the service is unable to start.
The solution that worked for me:
1. Set your default app install location to "phone"
2. Use "manage applications" to uninstall "zyspkloit"
3. Re-run unrevoked

Same issue here
Hi,
I am seeing this same issue, but do not understand the reference to #Unrevokedtest on freenode. Regarding the second suggestion I'm not sure where to go to check the default for installing applications, but did delete it and try again without success. My device is the HTC Aria running with that recent 2.1 upgrade. Any additional information would be appreciated.
Thanks !
Louis

Now looking for unrevoked 3.21
Hi,
I actually managed to make sense of the #unrevokedtest, but the recommendation there was that I needed an older version of unrevoked, specifically 3.21. Unfortunately they couldn't find a copy, does anyone here have that version for me to try?
Thanks !
Louis

v3.21 found and all is well
Hi,
Found a copy of 3.21 after several Google searches, worked like a champ.
Thanks,
Louis

Had the same problem with Unrevoked3.31
Using 3.21 did the job !
Thx all.