[Guide] How to recover your semi-brick - G2 and Desire Z Android Development

[Guide] How to recover your semi-brick - G2 and Desire Z Android Development

YES YOU NEED TO READ THIS WHOLE POST, PROB MORE THEN ONCE TO MAKE SURE YOU GOT IT. YES I KNOW HOW LONG IT IS, I TYPED IT!
*Also note that not all sections will apply to you. I have tried to seperate different senerios using * at each one. Also more then one section here may be needed by you.
the reason i call it a semi-brick is because a true brick can bot be recovered with out opening the case.
first go here and read this for info: http://forum.xda-developers.com/showthread.php?t=838484
now since your here im going to assume that its too late.
*things you will need.
copy of cwm recovery. get it here (the manual install link): http://forum.xda-developers.com/showpost.php?p=9145724&postcount=28
adb installed and working.
a known good rom, or nandroid backup. here is one: http://forum.xda-developers.com/showthread.php?t=836042 (use odex one)
a wpthis.ko for YOUR specfic kernel (run (adb shell cat /proc/version) that will tell you what kernel you have)
*first thing we need to know is, are you s-off or s-on now?
if your s-off just boot into clockwork mod recovery, wipe the phone and flash a known good rom and be done with it. if you dont have cwm recovery installed. boot into fastboot (vol down+power) you must have the sdk/adb installed and working, and type fastboot flash recovery LocationOfRecovery.img (where LocationOfRecovery.img= where you have the recovery, ie c:\android\recovery.img). once thats installed follow instructions above.
*if you are s-on:
will the phone boot into android? if so your not bad off.
if you want to unroot to return the phone, follow the unroot thread here: http://forum.xda-developers.com/showthread.php?t=835971
if you dont want to unroot then you have a couple of different options. if you have cwm recovery still installed, just follow instructions above and flash a known good rom. ive been told that boot.img (kernel) wont flash if you are s-on. the way to fix this (temporarily) is boot into recovery, but before you flash run these commands:
(put wpthis.ko in sdk folder)
adb remount
adb push wpthis.ko /data/local/wpthis.ko (specific for your kernel)
adb shell
# insmod /data/local/wpthis.ko (should get same function not implemented error as when u rooted first time)
then proceed to flash the rom. once booted into android skip down to, "now to get back to s-off"
*if you have stock or eng-recovery installed.
will the phone attempt to boot android at all? where is it stuck at?
a good min after it starts to try to boot, type these commands:
adb remount
adb shell
if you can get in shell then theres still hope. back out shell for a second and start here:
put the cwm recovery.img and wpthis.ko in your sdk folder
adb remount
adb push wpthis.ko /data/local/wpthis.ko (specific for your kernel)
adb push recovery.img /data/local/recovery.img
adb shell
# insmod /data/local/wpthis.ko (should get same function not implemented error as when u rooted first time)
# dd if=/data/local/recovery.img of=/dev/block/mmcblk0p21 (now wait a min or 2 to give it time to finish)
#sync (give it another min or to just to be safe)
#reboot recovery
at this point you should be in cwm recovery. follow instructions above for flashing with s-on.
*if you cannot get into shell while booting, but have eng-recovery installed, there might be some options.(however this is all theory)
boot into recovery-
if you are on linux using adb, you can try taking sh from /system/bin folder of any custom rom, chmod 0755 it, then push it to /system/bin and adb shell might work.
windows-
boot into recovery.
a system.img compatible with your installed kernel pushed may work. put the system.img into the sdk folder.
adb push system.img /data/block/mmcblk0p25
then reboot and see where you are. if that dont work, grab the modified miscnew.img here: http://www.4shared.com/file/pUPfrGi-/mmcblk0p17.html
rename it misc.img put it in sdk folder and
adb push misc.img /dev/block/mmcblk0p17
then reboot into bootloader with PC10IMG.zip on root of sdcard and it should run though. if it does your fully stock and get to start all over again.
*if you cannot get into shell, and you have stock recovery, s-on, and post OTA, im sorry your pretty screwed. as of right now the only thing thats gonna bring it back is a full img/update signed from htc thats equal to or higher then the version currently on the phone. (well and jtag of course)
*well now you've done one of the steps above. your booted into android, you have perm root, and cwm recovery installed, just still s-on. dont worry your almost there!
first take that wpthis.ko for you kernel and push it, and the eng hboot.
adb push wpthis.ko /data/local/
adb push hboot-eng.img /data/local
then from adb shell, or terminal root prompt:
# insmod /data/local/wpthis.ko (again you should get the function not implemented error)
NOW REMEMBER THIS NEXT STEP COULD MEAN DEATH FOR YOU G2 IF TYPED WRONG, AND AFTER ALL THIS HARD WORK!
# dd if=/data/local/hboot-eng.img of=/dev/block/mmcblk0p18
wait a few mins to be sure its done.
# sync
wait a few more just cause.
reboot, you should now be s-off, cwm recovery installed, and free to do whatever you want. just dont go screwing it up again
* as new methods are discovered, or ones here are proven wrong, i will update as necessary. as of the writing post, 2 devices that i know of have been saved!
good luck!
wpthis.ko for bacon bits.03 kernel: http://www.4shared.com/file/OAcd1bix/wpthis-263221-cyanogenmod.html

before you post with problems make sure you have read this at least 2 times. have this info in you post:
what was the last running rom/kernel combo you had?
list EVERYTHING you have done since that point
which recovery is installed?
what happens in recovery when you type
adb devices?
adb remount?
adb shell?
does it try to boot? is it stuck on splash screen, or does it make it to boot animation? 1 min after you turn it on, what happens when you type:
adb devices?
adb remount?
adb shell?

Thank you, really, for taking the time to write this guide. I shared that dreadful feeling of a brick a little while ago, but made it out alive. I know this will help a lot of people.

I'm not bricked, semi bricked or none of that. Rootrd and running BB 0.3
This is the best guide to everything you would need. Too bad you can't post this at the beginning of every thread or some kind of link on every page. This would answer a lot of question if some people would look hard enough. I'm not some smart phone guy by no means. I just read a lot before I ask. In my further reading I can direct people.with further problems here.
Thanks for all your work and giving me another fun hobby
Peace
Sent from my T-Mobile G2 using XDA App

Question why is it that you have "dd if....../mmcblk0p21" in one area and towards the bottom you have "May brick phone ...dd if...../mmcblk0p18." Thought it should always be .../mmcblk0p18?
Phone: T-Mobile G2/Vision Rooted
Rom: Latest Cyanogen
Recovery: CWM waiting for Amon_RA

Good point . Not sure on that one
Sent from my T-Mobile G2 using XDA App

renn9420 said:
Question why is it that you have "dd if....../mmcblk0p21" in one area and towards the bottom you have "May brick phone ...dd if...../mmcblk0p18." Thought it should always be .../mmcblk0p18?
Phone: T-Mobile G2/Vision Rooted
Rom: Latest Cyanogen
Recovery: CWM waiting for Amon_RA
Click to expand...
Click to collapse
if you look where im saying /mmcblk0p21 we are replacing RECOVERY with CWM. i do that because i just dont like the idea of trying to replace hboot from a looping system. worst case something goes wrong, you still have hboot and you can try again. screw up hboot, game over! then once android is back up and running we worry about hboot on mmcblk0p18.

you should not state that steps can be changed if people are brave, someone is going to sip parts and cry that their hboot is boned and now they have a BRICK, this is the best post i have seen in the G2 section thus far and i have been through almost every thread(with any kind of importance) in the dev section and 90% of them in general and Q&A. thank you for this post and let's hope people READ at least 5 times before even starting on this.

Gotcha
Phone: T-Mobile G2/Vision Rooted
Rom: Latest Cyanogen
Recovery: CWM waiting for Amon_RA

Amazing guide, thanks a lot.
fastludeh22 said:
the reason i call it a semi-brick is because a true brick can bot be recovered with out opening the case.
Click to expand...
Click to collapse
I have a full, honest-to-god brick in my drawer (executed dd if=/sdcard/hbooteng.img of=/dev/block/mmcblk0p18 with a wrong "hbooteng.img file).
I'm really, really interested in some guide or info about how to try and recover the brick. I don't mind if I have to open the case, there's not going down from where I am right now.
By the way, my second DZ just arrived, tomorrow I'll try to S-OFF it again... I will have nightmares tonight.

reycat said:
Amazing guide, thanks a lot.
I have a full, honest-to-god brick in my drawer (executed dd if=/sdcard/hbooteng.img of=/dev/block/mmcblk0p18 with a wrong "hbooteng.img file).
I'm really, really interested in some guide or info about how to try and recover the brick. I don't mind if I have to open the case, there's not going down from where I am right now.
By the way, my second DZ just arrived, tomorrow I'll try to S-OFF it again... I will have nightmares tonight.
Click to expand...
Click to collapse
Well it will take a jtag and a lot of research, since it hasn't been done to a g2 yet. Search g1 development forum dor debricking if u want an idea of what's involved.
I remember talking to gtrab a little about your problem. So did you use the wrong file, or did you type an address wrong? What file or typo was it exactly?
What happens when u try to boot into fastboot, or anything else?

{golf clap} on the post.
you sir, have incredible patience... and it's truly appreciated.

fastludeh22 said:
Well it will take a jtag and a lot of research, since it hasn't been done to a g2 yet. Search g1 development forum dor debricking if u want an idea of what's involved.
Click to expand...
Click to collapse
Mmm... It seems all of it is quite a bit over my head.
I remember talking to gtrab a little about your problem. So did you use the wrong file, or did you type an address wrong? What file or typo was it exactly?
What happens when u try to boot into fastboot, or anything else?
Click to expand...
Click to collapse
Don't ask me how I did it, but I actually downloaded a web page instead of the actual hboot file I should have used . I did it from the phone and didn't notice. Since I was supposed to rename it to make the typing easier, I didn't notice it was the wrong file.
Anyway, right now the phone is a complete brick. It doesn't respond to any button presses, the LED doesn't do anything when you plug in the charger... A complete brick.

Device offline?
fastludeh22 said:
before you post with problems make sure you have read this at least 2 times. have this info in you post:
what was the last running rom/kernel combo you had?
list EVERYTHING you have done since that point
which recovery is installed?
what happens in recovery when you type
adb devices?
adb remount?
adb shell?
does it try to boot? is it stuck on splash screen, or does it make it to boot animation? 1 min after you turn it on, what happens when you type:
adb devices?
adb remount?
adb shell?
Click to expand...
Click to collapse
Never used ADB before, followed [forum wont let me post outside links] to set it up. when typing adb devices while in recovery mode, get "list of devices attached
HT09PR204734
offline."
here is a screen shot : [forum wont let me post)
running windows 7 64bit...device not recognized by ADB at alll when stuck on splash screen....did some research couldnt find a real solution...soooo what do you recommend trying?

im stuck on the splash screen.. and i cant get adb to work either.. is missing a driver but i cant for the life of me find one ...

-FuRBz- said:
im stuck on the splash screen.. and i cant get adb to work either.. is missing a driver but i cant for the life of me find one ...
Click to expand...
Click to collapse
Download and instal PDANet, that gave me the drivers i needed for adb, now if only i could figure out how to get my device to register online through the ADB command interface.....

^^ you my friend are awesome! dl pdanet, was able to get the drivers.. was able to go into bootloader and did a recovery from there.. im up and running again!!

marley097 said:
Never used ADB before, followed [forum wont let me post outside links] to set it up. when typing adb devices while in recovery mode, get "list of devices attached
HT09PR204734
offline."
here is a screen shot : [forum wont let me post)
running windows 7 64bit...device not recognized by ADB at alll when stuck on splash screen....did some research couldnt find a real solution...soooo what do you recommend trying?
Click to expand...
Click to collapse
Sounds like you have stock recovery installed, with s-on and no adb/shell access, I'm sorry your pretty screwed. You can try factory reset and see if that helps boot, or to get adb access while trying to boot. Other then that, at the moment the only way to recover is a offical signed pc10img of version equal to or higher then what you have. I'm working hard to come up with something, ill keep you guys informed. I think u said in pm, you have already done the OTA, which makes you version number 1.22.something.
-FuRBz- said:
^^ you my friend are awesome! dl pdanet, was able to get the drivers.. was able to go into bootloader and did a recovery from there.. im up and running again!!
Click to expand...
Click to collapse
Glad you got it! After drivers installed, did you fix it per a section of the op?

it all happened because i had tried flashing cm 6.1- it got stuck on the splash screen but i had done a recovery prior to trying to flash... once i got the drivers installed i was able to get in to adb and do a reboot-bootloader and was able to get into the recovery file

fastludeh22 said:
Sounds like you have stock recovery installed, with s-on and no adb/shell access, I'm sorry your pretty screwed. You can try factory reset and see if that helps boot, or to get adb access while trying to boot. Other then that, at the moment the only way to recover is a offical signed pc10img of version equal to or higher then what you have. I'm working hard to come up with something, ill keep you guys informed. I think u said in pm, you have already done the OTA, which makes you version number 1.22.something.
Click to expand...
Click to collapse
Lame....so how often do they release official pic10img's....? are we talkin a month....or a year?

Related

[Q] Noob Question

Okay, I am getting ready to root my phone tonight...
As far as all that - I think I got all that covered.
As far as flashing a recovery - I want to use amon-ra's - RA-evo-v1.8.0 found here - http://forum.xda-developers.com/showthread.php?t=705026
In that post it gives two differant ways to flash the recovery:
via fastboot
Code:
Copy recovery-RA-evo-v1.8.0.img to a location where fastboot can find it.
Boot your phone into fastboot mode
fastboot devices(press enter) (to make sure that fastboot "sees" your phone)
fastboot flash recovery recovery-RA-evo-v1.8.0.img(press enter)
via terminal app or adb => Make sure your rom contains flash_image!!
Code:
Copy recovery-RA-evo-v1.8.0.img to the root of your sdcard
start the terminal app or launch adb
su(press enter)
flash_image recovery /sdcard/recovery-RA-evo-v1.8.0.img(press enter)
reboot recovery(press enter)
My questions are:
first of all - what is "Fastboot"?? I mean is it an application that I can download and install it this way?
second of all - what is a "terminal app"
&
third - what is "adb"?
I keep hearing the term "shell", is a "shell" the same as windows command prompt? Or is that "adb"?
I know these are probably stupid questions for most, but I like to have every thing ready to go before I tackle projects...
Any guidance would be greatly appriciated!!
J

Another option is to install ROM manager and install AmonRa that way. (think you have to pay) Open it and click on Flash Alternate Recovery.
Terminal app is just an application providing terminal-like access to the system. Imagine the command prompt on a Windows system, but understand your phone is running Linux underneath the hood so the commands are different.
adb likely is an acronym for something along the lines of debugger or something. It essentially allows you to communicate with your phone from your computer. So, go to a command prompt and you can enter commands to execute on your phone via adb. (shell = command prompt, adb runs within the shell/command prompt)
You're right in trying to find out as much as possible before tackling something like this.

terrel_b said:
Another option is to install ROM manager and install AmonRa that way. (think you have to pay) Open it and click on Flash Alternate Recovery.
Terminal app is just an application providing terminal-like access to the system. Imagine the command prompt on a Windows system, but understand your phone is running Linux underneath the hood so the commands are different.
adb likely is an acronym for something along the lines of debugger or something. It essentially allows you to communicate with your phone from your computer. So, go to a command prompt and you can enter commands to execute on your phone via adb. (shell = command prompt, adb runs within the shell/command prompt)
You're right in trying to find out as much as possible before tackling something like this.
Click to expand...
Click to collapse
Great, thanks for the response! That helps alot - I searched around a little while waiting for a reply and still didnt clear any thing up. I have already DL'd ROM Manager and I will just use that... I just like to have as much info as I can...
Thank you!
J

How are you going to root? if you are going to use unrevoked (doesn't work with hboot2.02) just open unrevoked without the phone connected and then point it to the amon-ra recovery.img you downloaded, up at the top its under file dropdown or somewhere up there then unrevoked will flash ra for you automatically

fastboot is an option under HBOOT(power of your phone power on pressing power and volume down it is the first option)
terminal app is an app that is like the command prompt in windows on your phone a good one is terminal emulator
adb is is Android debug bridge like stated above. it is for people that like to use the cmd(command prompt) on your computer to do things with your phone like pulling apps off your phone, pushing them on your phone, and other like this most of this can be done using root explorer to place the flies or making a flashable zip. another thing adb is used for is getting your phone out of boot loops that you cant any other way. never had to do this so dont know how. i think adb and adb shell are basically the same thing not 100 on that one. here are some likes about adb for you
http://theunlockr.com/2009/10/06/how-to-set-up-adb-usb-drivers-for-android-devices/
http://www.gadgetsdna.com/android-terminal-adb-shell-command-list/1168/
as for using terrel_b's suggestion this is a good suggestion. using rom manager you can flash your recovery this way it is very easy way to do this it is free there is a paid version of rom manager it is for using extra things on clockwork recovery, so basically the only thing you will use rom manager for, if you decide to use it, is flashinf your recovery unless you use clockwork. the reason clockwork is not used more is that there are questions if it wipes everything properly and if something is not wiped right it can cause lots of problems. of and just in case you are wonndering rom manager is an app you can get off the market.
hope this helps and if you need anything else ask

ifly4vamerica said:
How are you going to root? if you are going to use unrevoked (doesn't work with hboot2.02) just open unrevoked without the phone connected and then point it to the amon-ra recovery.img you downloaded, up at the top its under file dropdown or somewhere up there then unrevoked will flash ra for you automatically
Click to expand...
Click to collapse
Im using unrevoked... I am still running hboot 0.97.0000... thanks for the input, I appriciate it!!
J

roscoenr said:
fastboot is an option under HBOOT(power of your phone power on pressing power and volume down it is the first option)
terminal app is an app that is like the command prompt in windows on your phone a good one is terminal emulator
adb is is Android debug bridge like stated above. it is for people that like to use the cmd(command prompt) on your computer to do things with your phone like pulling apps off your phone, pushing them on your phone, and other like this most of this can be done using root explorer to place the flies or making a flashable zip. another thing adb is used for is getting your phone out of boot loops that you cant any other way. never had to do this so dont know how. i think adb and adb shell are basically the same thing not 100 on that one. here are some likes about adb for you
http://theunlockr.com/2009/10/06/how-to-set-up-adb-usb-drivers-for-android-devices/
http://www.gadgetsdna.com/android-terminal-adb-shell-command-list/1168/
as for using terrel_b's suggestion this is a good suggestion. using rom manager you can flash your recovery this way it is very easy way to do this it is free there is a paid version of rom manager it is for using extra things on clockwork recovery, so basically the only thing you will use rom manager for, if you decide to use it, is flashinf your recovery unless you use clockwork. the reason clockwork is not used more is that there are questions if it wipes everything properly and if something is not wiped right it can cause lots of problems. of and just in case you are wonndering rom manager is an app you can get off the market.
hope this helps and if you need anything else ask
Click to expand...
Click to collapse
Very helpful info - thanks!! I have already DL'd ROM Manger Pro...

Okay - another question, can i place the amon-ra recovery on the SD card BEFORE i root the phone or should I do that AFTER I root the phone? Just curious, I dont even know if it matters one way or the other... Just want to be sure before I do it...

Okay - I ROOTed using unrEVOked3.... Success! I do have a question though - I clicked on the superuser icon and nothing comes up?!? Is that right? I thought it was an app that gave you all kinds of stuff?? I guess I could have misunderstood the purpose of "superuser" - Also, After ROOT, I have not installed a new ROM yet - does the 4G still work with the stock ROM? I clicked the 4G button and it still says 3G... anyway Im gonna flash the Amon-Ra recovery now...

JayStation3 said:
Okay - I ROOTed using unrEVOked3.... Success! I do have a question though - I clicked on the superuser icon and nothing comes up?!? Is that right? I thought it was an app that gave you all kinds of stuff?? I guess I could have misunderstood the purpose of "superuser" - Also, After ROOT, I have not installed a new ROM yet - does the 4G still work with the stock ROM? I clicked the 4G button and it still says 3G... anyway Im gonna flash the Amon-Ra recovery now...
Click to expand...
Click to collapse
Well superuser gives root permissions to new applications loaded on a rooted android 2.2 platform phone.
To load a new ROM, flash via first on recovery.
Hope that helps, sorry I was being in a bit of short there eariler but I edited my post right I hope, others can check too.

alekosy said:
Well superuser gives root permissions to new applications loaded on a rooted android 2.2 platform phone.
To load a new ROM, flash via first on recovery.
Hope that helps, sorry I was being in a bit of short there eariler but I edited my post right I hope, others can check too.
Click to expand...
Click to collapse
No - you were very helpful... I got it ROOTed, now I just want to change my recovery to amon-ra so I can use my 4G...
4G is not working now - so im assuming I need to flash a new recovery... I heard amon-ra does the trick...

JayStation3 said:
No - you were very helpful... I got it ROOTed, now I just want to change my recovery to amon-ra so I can use my 4G...
4G is not working now - so im assuming I need to flash a new recovery... I heard amon-ra does the trick...
Click to expand...
Click to collapse
Edited: http://forum.xda-developers.com/showthread.php?t=715525
see if that helps.
OR
Read this http://forum.xda-developers.com/showthread.php?t=705026

alekosy said:
Edited: http://forum.xda-developers.com/showthread.php?t=715525
see if that helps.
OR
Read this http://forum.xda-developers.com/showthread.php?t=705026
Click to expand...
Click to collapse
Everything is there, pretty much solid on the information. I hope it works out for you, if not don't RUSH and take your sweet old time browsing the forums for help. GL

Strange the wimax should still work did you reboot and try 4g again? Unrevoked isn't known to break wimax
sent from my EVO at the edge of hell

alekosy said:
Edited: http://forum.xda-developers.com/showthread.php?t=715525
see if that helps.
OR
Read this http://forum.xda-developers.com/showthread.php?t=705026
Click to expand...
Click to collapse
cool, I will read them and figure it all out... thanks for the info... i flashed amon ra last night, did a back up w/ TB... did a NAND back up through the recovery of the phone... Im just a little confused on the differant recoveries...

Jbcarrera said:
Strange the wimax should still work did you reboot and try 4g again? Unrevoked isn't known to break wimax
sent from my EVO at the edge of hell
Click to expand...
Click to collapse
I thought I did reboot at least once, when I was preforming the NAND back up - but Im rebooting now and I will test it out again...
I do not have great 4G signal here at my house, so that may be it as well... I will mess with it and see whats up through out the day and let you know tonight...
I have noticed that my touch screen doesnt seem as responsive as it was and the phone in general is kind of glichy...

Ok, my 4G is still working... I must not have had a strong enuf signal at my house for it to kick in... No I'm having problems getting tether to work... I started a new thread on that one though...
Sent from the MATRIX... while plugged into my EVO... using the XDA app... from a galaxy far-far away.......

[Q] HELP! hboot2.02 Root Fail!

So I got an EVO when they first came out and rooted/rom'd it, but the charging port broke and they junked it out and gave me a new one
I guess i didn't think about it before i did it, but i am finding out that having the hboot2.02 and trying to root it the old way has messed me up. I now can not seem to connect to it through adb or get the RUU to find the phone.
I am in the white skateboard screen with the Fastboot, Recovery, Clear Storage, Simlock, and HBOOT usb options. If i try and reboot it, it goes to the RED EXCLAMATION POINT/Triangle.
I never got a custom recovery installed before i screwed this up somehow. The PC36IMG failed on the radio_v2 and didnt partition.
Can I load the stock or anything for that matter from where i am now?
I know this has prob been covered, but i have been on here for 3 hours now trying to get this going again. Thanks

Try this....
It's late and I have to catch up on some sleep before work so I will be brief.... Rooting Hboot 2.02 can cause a lot of headaches. I am surprised the RUU did not find your phone.
My only advice is to read up on this thread http://forum.xda-developers.com/showthread.php?t=829045
It is by far the best and safest method to root your phone at this point and if you ask I bet someone can help there.
Check out the first post there is a special recovery file that might help.
Good luck.

I think if you try to find the thread that allows you to fastboot adb push a file into your system (file like amon_ra recovery and reboot into it), but if you don't have root, I'm stuck thinking like you too. :/

Yeah, it still says s-on, so i am assuming i didn't get rooted. This is so frustrating!
I have been trying to do the steps in the thread mentioned above, but no luck so far

IzzyIsaac said:
Yeah, it still says s-on, so i am assuming i didn't get rooted. This is so frustrating!
I have been trying to do the steps in the thread mentioned above, but no luck so far
Click to expand...
Click to collapse
So what do you see currently when you run your phone?
Is there anything conflicting it?

I see a picture of my EVO on a black screen with a red triangle and exclamation point.

I was able to do all these except for the flash image
adb push root/unrevoked-forever.zip /sdcard/
adb push root/mtd-eng.img /sdcard/
adb push pc36img/PC36IMG-ENG.zip /sdcard/PC36IMG.zip
adb push pc36img/PC36IMG-MR.zip /sdcard/PC36IMG-MR.zip
adb push root/flash_image /data/local/
adb push root/rageagainstthecage /data/local/tmp
It said "C:\hboot>adb push root/flash_image /data/local failed to copy 'root/flash_image' to '/data/local/': Is a directory
Then i tried getting into adb by typing 'adb shell' and got a no such file or directory

IzzyIsaac said:
I was able to do all these except for the flash image
adb push root/unrevoked-forever.zip /sdcard/
adb push root/mtd-eng.img /sdcard/
adb push pc36img/PC36IMG-ENG.zip /sdcard/PC36IMG.zip
adb push pc36img/PC36IMG-MR.zip /sdcard/PC36IMG-MR.zip
adb push root/flash_image /data/local/
adb push root/rageagainstthecage /data/local/tmp
It said "C:\hboot>adb push root/flash_image /data/local failed to copy 'root/flash_image' to '/data/local/': Is a directory
Then i tried getting into adb by typing 'adb shell' and got a no such file or directory
Click to expand...
Click to collapse
I'm no expert at android development, but honestly It looks like you've badly bricked your phone using the old root method I have no clue xD

http://forum.xda-developers.com/showthread.php?t=829045

do you think since it isn't rooted yet(s-on) they would exchange it out at best buy since i have the black tie protection or whatever?

I don't know but try to unroot LOL http://forum.xda-developers.com/showthread.php?p=7471721#post7471721

Well, i dunno from which site i got it because i have so many PC36IMG's now, but I was able to load one up on my SD card via my buddy's droidX and it went through smooth and i'm back to stock 2.2
I am not going to touch it right now as far as rooting it. I will save that for another day, soooo tired after 6 straight hours in this chair!
Thanks for the help!

IzzyIsaac said:
Well, i dunno from which site i got it because i have so many PC36IMG's now, but I was able to load one up on my SD card via my buddy's droidX and it went through smooth and i'm back to stock 2.2
I am not going to touch it right now as far as rooting it. I will save that for another day, soooo tired after 6 straight hours in this chair!
Thanks for the help!
Click to expand...
Click to collapse
Np, Glad your phone got unrooted back to normal. Maybe wait a few days and see how the forums turn up to find a better way to root it.

Well, i just didnt realize that there was a newer hboot and a different way to root if you have this one. I might try again here in another day or two like you said after i really read up some more. That sucked hard not having a phone for 6 hours and thinking i would have to get a new one!

[Q] Have I managed Perm Root with this much ease? Visionary+ Question

About 3 hours ago, I won a Desire Z (wheeey!) at the HTC London meetup. Naturally, I came straight here after the help I got in January rooting my Desire.
I used the Visionary method and obtained temp root status, and then attempted perm root, which seemed to work. All of the guides I have read include a bunch of steps after this, one of which included deleting Visionary, which I then did. I just turned the phone off, took the battery out for a bit and then turned it back on. I still have the Superuser icon and the Terminal Emulator indicates that I have root access... is that it then? It's that simple?
Please tell me if I've done anything wrong, as I don't want to flash Cyanogen and Clockwork Recovery if it's all going to go to hell on me. Any advice or confirmation on whether or not I've obtained perm root would be lovely.
Oh, my firmware version is 1.34.405... etc. Is this simply the last version which allows for such easy root?

Arconaught said:
About 3 hours ago, I won a Desire Z (wheeey!) at the HTC London meetup. Naturally, I came straight here after the help I got in January rooting my Desire.
I used the Visionary method and obtained temp root status, and then attempted perm root, which seemed to work. All of the guides I have read include a bunch of steps after this, one of which included deleting Visionary, which I then did. I just turned the phone off, took the battery out for a bit and then turned it back on. I still have the Superuser icon and the Terminal Emulator indicates that I have root access... is that it then? It's that simple?
Please tell me if I've done anything wrong, as I don't want to flash Cyanogen and Clockwork Recovery if it's all going to go to hell on me. Any advice or confirmation on whether or not I've obtained perm root would be lovely.
Oh, my firmware version is 1.34.405... etc. Is this simply the last version which allows for such easy root?
Click to expand...
Click to collapse
Having the SuperUser icon just means the app is installed, open up terminal and type 'su' to see if it throws up any errors
Sent from my HTC Vision using XDA App

I should have mentioned that I did that and got the # symbol, am I good to go?

Arconaught said:
I should have mentioned that I did that and got the # symbol, am I good to go?
Click to expand...
Click to collapse
In theory, yes; in practice, no. Visionary (with the G2/Desire Z, at least) is known to be a bit buggy. You shouldn't have any issues installing custom ROMs but, I would recommend using the wiki method to root.
Sent from my HTC Vision using XDA App

OriginalGabriel said:
In theory, yes; in practice, no. Visionary (with the G2/Desire Z, at least) is known to be a bit buggy. You shouldn't have any issues installing custom ROMs but, I would recommend using the wiki method to root.
Click to expand...
Click to collapse
My understanding, if he already used Visionary to root, and it worked than he should be good to go. Either it works, or it doesn't. The risk with Visionary is that it sometimes corrupts some partitions, which causes the phone to not boot. I haven't read any conclusive reports on Visionary causing long term issues (correct me if I'm wrong).

redpoint73 said:
My understanding, if he already used Visionary to root, and it worked than he should be good to go. Either it works, or it doesn't. The risk with Visionary is that it sometimes corrupts some partitions, which causes the phone to not boot. I haven't read any conclusive reports on Visionary causing long term issues (correct me if I'm wrong).
Click to expand...
Click to collapse
This is my understanding as well, though I'd probably still use GFREE to get S-OFF if I were OP.

That's my next question, I'm using this guide ( http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision#Rooting_the_G2 ) to try and get S-Off to flash Cyanogen and I'm wondering what step to start on, assuming from your replies that I'm rooted already.
I know it's a bit of a dumb question, but I just don't wanna fudge my new phone.

Arconaught said:
That's my next question, I'm using this guide ( http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision#Rooting_the_G2 ) to try and get S-Off to flash Cyanogen and I'm wondering what step to start on, assuming from your replies that I'm rooted already.
I know it's a bit of a dumb question, but I just don't wanna fudge my new phone.
Click to expand...
Click to collapse
I used the wiki method myself, those that used other methods (like Visionary) and were told to root via the wiki seem to have all just started at the beginning, from what I've read.
Sent from my HTC Vision using XDA App

Arconaught said:
That's my next question, I'm using this guide ( http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision#Rooting_the_G2 ) to try and get S-Off to flash Cyanogen and I'm wondering what step to start on, assuming from your replies that I'm rooted already.
I know it's a bit of a dumb question, but I just don't wanna fudge my new phone.
Click to expand...
Click to collapse
Whoa the Wiki method is completely different, looks like it was rewritten on 04/01.
You can completely ignore the temp rooting steps and concentrate on the gfree steps
From the "Necessary Files" section you need gfree, flash_image and ClockWorkMod Recovery
I would use the latest ClockWorkMod recovery rather than the one listed on the Wiki:
http://mirrorbrain.cyanogenmod.com/cm/recoveries/recovery-clockwork-3.0.2.4-vision.img (of course it's only the latest as of the time of this writing)
From step 2 you need to use:
Code:
$ adb push gfree /data/local/tmp/
$ adb push flash_image /data/local/tmp/
From step 2.a you need to use:
Code:
$ adb push recovery-clockwork-3.0.2.4-vision.img /data/local/tmp/recovery.img
Again note that the file name for CWM will depend on the version of CWM you are using.
Skip to step 4.b you need to use:
Code:
# cd /data/local/tmp
# ./gfree -f
# ./flash_image recovery recovery.img
# sync
Continue on as normal from here.
I skipped the temp root and perm root sections as you are already perm root.
I also skipped the ENG HBOOT parts, since that's not strictly necessary and the most risky part of the whole process (one mistake can result in a brick). If you want to flash the ENG HBOOT you would need to follow steps 4.a instead of 4.b, (you would also need the necessary HBOOT of course) the only command you need to omit from 4.a or 4.b is "# ./root_psn" which is the script which establishes permanent root.

Thanks a lot so far man, but I'm still stuck. I have adb, when I open it in the SDK, it flows for a bit, then closes. This is right, right? I'm meant to do all of these prompts via the cmd window?

OK, I've now sorted adb, but I can't get anything to work past that. Nothing will transfer to my phone and I'm going to kill... somebody.

Arconaught said:
OK, I've now sorted adb, but I can't get anything to work past that. Nothing will transfer to my phone and I'm going to kill... somebody.
Click to expand...
Click to collapse
You say you've sorted adb, but can you be more specific please ? What works and what doesn't work exactly ?

Ah, yeah, sorry. I got to the point where when I type in "adb devices" in the command window, it shows me my phone, with the serial number and whatnot. However, whenever i try the command:
$ adb push gfree /data/local/tmp/
It just won't work. I have all the files together in my desktop at the moment, having moved them from the downloads folder on my laptop. Is there a specific place I should have the stuff I need to send to my phone?

There is a great write up here about getting adb working. It sounds like either you didn't set up a "path" to use those commands anywhere or if you don't want to do that make sure your files are in the same folder as your adb.
Sent from my HTC Vision using XDA App

Arconaught said:
Ah, yeah, sorry. I got to the point where when I type in "adb devices" in the command window, it shows me my phone, with the serial number and whatnot. However, whenever i try the command:
$ adb push gfree /data/local/tmp/
It just won't work. I have all the files together in my desktop at the moment, having moved them from the downloads folder on my laptop. Is there a specific place I should have the stuff I need to send to my phone?
Click to expand...
Click to collapse
You need to have the files (extracted from the ZIP files you downloaded) in the same folder you run the ADB commands, if your ADB is in your path you should be able to run ADB commands from any folder.
To summarize you need to extract all the zips you downloaded under necessary files, all to the same folder. The open a command prompt and CD to that folder before you start using your adb push commands.

shortlived said:
There is a great write up here about getting adb working.
Click to expand...
Click to collapse
Yeah, steviewevie wrote it:
http://forum.xda-developers.com/showthread.php?t=865685
But it looks like he is willing to give the OP some personalized help.

Right, thanks guys, I think I'm making some progress.
ADB is all set up, and as far as I'm aware, having:
program files > android sdk > platform tools
on my path should mean I can open adb from anywhere right? I have all of the extracted files in platform tools, where adb is, in my program files... is this right, or have I completely missed the point here?
I keep getting "cannot stat 'gfree':: No such file or directory"
Sorry, I seem really stupid concerning this whole thing, but I'm sure it's something equally obvious that I'm just not seeing.

New problem. I worked out what I'd done wrong there, and got everything onto my phone. However, when trying to change the directory to /data/local/tmp, I keep getting "The system cannot find the path specified"
Now what am I doing wrong?

Arconaught said:
New problem. I worked out what I'd done wrong there, and got everything onto my phone. However, when trying to change the directory to /data/local/tmp, I keep getting "The system cannot find the path specified"
Now what am I doing wrong?
Click to expand...
Click to collapse
Remember you are running those commands (everything in that section) from an ADB shell, not from the Windows command prompt.

Excuse my ignorance, but what exactly do you mean by that? What should I do?

[GUIDE] Comprehensive S-OFF/Root Methods

Please do not PM me with questions about this guide! I don't have time to help everyone through it, create a thread in Q&A if you don't have 10 posts or post here, there are other people who have done this and can help you, and I will get to it if I can. PMs asking questions about this guide will be ignored. Thank you.
Fully stable root methods for all firmware versions (no bootloops on 6.01.605.05 firmware!)
Table of Contents
To quickly find a section, hit CTRL+F and type the letters in parentheses, then click "Next"
(IRO) Intro: Read first!
(HDV) HTCDEV Unlock
(TCR) Tacoroot
(DWG) Downgrade tool
(RVL) Revolutionary
(HSO) S-OFF with HTCDev unlock (second post)
(ASO) After S-OFF (second post)
INTRO(IRO)DISCLAIMER: I am not responsible for anything that happens to your device while following these instructions. I will try to help you through problems as much as I can, but I can't guarantee success, especially if you do not carefully read the instructions.
This is a comprehensive guide of all known and fully stable root/s-off methods, at this time, it covers just about all firmware versions out there. Most of these methods will require the Android SDK, so download that (Google it. A link for this really isn't necessary, and I'm sure many people could use practice googling things. ) and set it up (again, just google "android sdk," the download page even has tutorials). The downgrade methods no longer require the sdk, but it is still reccomended that you download it as it is a very useful tool. Don't forget to download the device drivers here (only neccessary on Windows) and set the PATH variable.
So, which downgrade method should you use? Most likely you will either have firmware version 5.x or 6.x, you can find out under Settings>About phone. If you are using 5.x, go to the Downgrade Tool section; if you have 6.x, go to the Tacoroot section. Both methods eventually lead to the Revolutionary section, HTCDev unlock is not reccomended and, honestly, completely pointless (read more below).
HTCDEV UNLOCK(HDV)Versions: All
HTCDev is HTC's "official" unlock, it will unlock the bootloader but leave S-ON. Don't do it. Seriously. It's a guaranteed voided warranty and pretty much a huge PITA (you can't flash radios and need to extract and separately flash ROM kernels), and s-off methods are completely stable and even relockable. That said, if for whatever reason you do wish to do this, just go to http://htcdev.com/bootloader/. If you want to obtain S-OFF at any time after using HTCDev unlock, see the second post.
Note: to flash ROMs when HTCDev unlocked, flash the ROM normally, then extract the boot.img from the rom.zip and boot into fastboot, then use the command "fastboot flash boot boot.img."
TACOROOT(TCR)Versions: 6.01.605.05 firmware
Tacoroot is a temp root method discovered by Justin Case that will allow those on the newer firmware to flash an older version and root with Revolutionary. Before you begin, download this zip containing all the files you'll need:
EDIT: Looking for the files? See this post.
Extract this zip to C:/Android. You can extract it somewhere else, just replace C:/Android with the path to the wherever you extracted it wherever it comes up. Now, connect your device to your computer with a USB cable, turn on USB Debugging under Settings>Apps>Development, and disable fastboot under Settings>Power. Make sure your phone is fully charged. Open a command prompt by opening the start menu, typing "cmd" and hitting enter. Type in everything that is in black text. Notes and extra instructions will be written in blue. It is reccomended that you copy/paste the code to avoid typos, to do this, copy by highlighting the line and hitting Ctrl+C as usual; to paste, go to your command prompt and click the small black icon in the upper left corner. A menu will pop up, go to Edit>Paste. Make sure you have not highlighted any spaces before or after the line or any of the blue text. Now, begin copying the code:
cd C:/Android
md5sums RUU_Vivo_W_Gingerbread_S_VERIZON_WWE_2.18.605.3_Radio_1.09.01.0622_NV_VZW1.92_release_199487_si.zip Remove the space in the middle of the word radio before hitting enter, I don't know why it won't let me remove it. Result should be cea499f51b40055ffd118960e1e73255, if it isn't, redownload the miniadb zip.
md5sums 1.09.01.0312_vivow_Radio_PG32IMG.zip Result should be ea6b98be48210d7797e62362f49ff751
md5sums tacoroot.sh Result should be 6ec06d776feb212d8b2a55817eddf76d
md5sums misc_version Result should be 050f55d34ddbcc860efa5982491437de
adb devices Result should be your phone's serial number. If it isn't make sure drivers are properly installed and USB Debugging is enabled.
adb push tacoroot.sh /data/local/
adb shell chmod 755 /data/local/tacoroot.sh
adb shell /data/local/tacoroot.sh --setup This will reboot your phone. When you get to a screen with a red exclamation mark, press VolUp+Power until you get to a menu, then press VolUp+VolDown+Power until the phone turns off. Once it is rebooted, continue.
adb shell /data/local/tacoroot.sh --root
adb wait-for-device Running the step before this will reboot your phone again, this time it will be bootlooping, meaning it will not boot fully and get stuck on the boot animation. Once your prompt comes back after this step, you're good to continue even though the phone isn't fully booted.
adb push misc_version /data/local/tmp/misc_version
adb shell chmod 777 /data/local/tmp/misc_version
adb shell /data/local/tmp/misc_version -s 2.18.605.3
adb shell /data/local/tacoroot.sh --undo This will reboot your phone one more time, this time fully stable and will boot completely. Continue once fully booted.
adb reboot bootloader This will reboot your phone to a white screen with a few options. Once you are at this screen, continue with the instructions.
fastboot devices Result should be your phone's serial number, again.
fastboot getvar mainver The result should be 2.18.605.3. If it is not, something was not done correctly, you'll need to restart from the beginning.
fastboot erase cache
fastboot oem rebootRUU
fastboot flash zip RUU_Vivo_W_Gingerbread_S_VERIZON_WWE_2.18.605.3_Radio_1.09.01.0622_NV_VZW1.92_release_199487_si.zip This will take a bit of time without giving any indication as to when it will be done, be patient and do not interrupt it.
fastboot erase cache
fastboot oem rebootRUU
fastboot flash zip 1.09.01.0312_vivow_Radio_PG32IMG.zip Same as the above, do not interrupt under any circumstances (unless you really wanted a phone-shaped paperweight )
fastboot reboot
That's the end of the codes, you should be fully booted into the now downgraded version. Re-enable USB debugging, then continue to the Revolutionary section and follow instructions there.
DOWNGRADE TOOL
Versions: HBOOT .98, firmware below 6.01.605.05
This will not work with firmware version 6.01.605.05! Use the tacoroot method!
This tool will downgrade you to 2.3.3, which will allow you to use Revolutionary to gain S-OFF.
Download the tool here, and extract it to a folder where you can easily get to it in a command prompt/terminal.
Now, connect your device to your computer with a USB cable, and turn on USB Debugging in settings. To ensure you are connected, open a command prompt/terminal and type "adb devices". If you see a bunch of letters and numbers followed by "device," you're good to go.
Navigate to the files you extracted in a command prompt/terminal ("cd /path/to/folder," replacing /path/to/folder with the actual filepath), type "hack-vivow.cmd" and let it run. It may take a while and seem to get stuck on some commands, just leave it alone. After it's done, continue to the Revolutionary section. Yep, it really is that easy.
REVOLUTIONARY
Versions: GB 2.3.3, any others after downgrade methods
This is the final step that will actually get you S-OFF.
Go to the revolutionary website, click on the download link for your OS, you'll get a download right away. While it's downloading, fill out the form that pops up (if you don't know your serial number and have the sdk installed, open up a command prompt/terminal and type "adb devices," the letters/numbers before "device" is your serial. Extract the files and run either revolutionary or revolutionary.exe depending on your OS, enter your beta key and say yes when it asks to install CWM recovery. Let it run, and you'll be S-OFF and ready to go!
If you have any questions/comments or found something that isn't right, go ahead and post, I would greatly appreciate any positive or negative feedback, as long as it's constructive.
Credits:
attn1 for Downgrade tool
Revolutionary team
Guhl for misc_version
jcase for Tacoroot
PalmerCurling for Tacoroot downgrade guide
MIVLives for bootloop fix
scotty85 for better Tacoroot downgrade and HTCDev S-OFF method
If you find anything I didn't give credits for and should have, let me know and I'll add it.

Get S-OFF after using HTCDev Unlock
(HSO)If you used HTCDev unlock and want to get S-OFF, follow this guide. What you get from going from HTCDev unlocked to full S-OFF is a full unlock instead of HTC's restricted unlock. This way, you can flash custom radios and flash ROMs without needing to extract and separately flash the boot.img. (Note: If you already installed a custom recovery and a custom ROM, flash this ROM and start at "adb push misc_version /data/local/tmp/misc_version" in the code.) To do this, first download this zip and extract it to C:/Android. You can extract it somewhere else, just replace C:/Android with the path to where you extracted it wherever it comes up. Next, download this zip and extract it to C:/Android. Download this zip as well and put it in your C:/Android folder, but do not extract it. Now, connect your device to your computer with a USB cable, turn on USB Debugging under Settings>Apps>Development, and disable fastboot under Settings>Power. Make sure your phone is fully charged. Open a command prompt by opening the start menu, typing "cmd" and hitting enter. Type in everything that is in black text. Notes and extra instructions will be written in blue. It is recommended that you copy/paste the code to avoid typos, to do this, copy by highlighting the line and hitting Ctrl+C as usual; to paste, go to your command prompt and click the small black icon in the upper left corner. A menu will pop up, go to Edit>Paste. Make sure you have not highlighted any spaces before or after the line or any of the blue text. Now, begin copying the code:
cd C:/Android
md5sums RUU_Vivo_W_Gingerbread_S_VERIZON_WWE_2.18.605.3_Ra dio_1.09.01.0622_NV_VZW1.92_release_199487_si.zip Result should be cea499f51b40055ffd118960e1e73255, if it isn't, redownload the miniadb zip.
md5sums 1.09.01.0312_vivow_Radio_PG32IMG.zip Result should be ea6b98be48210d7797e62362f49ff751
md5sums misc_version Result should be 050f55d34ddbcc860efa5982491437de
adb devicesResult should be your phone's serial number.
adb push CWM-SuperSU-v0.94.zip /sdcard This might take a minute or so. If it gives an error, try "adb push CWM-SuperSU-v0.94.zip /mnt/sdcard"
adb reboot bootloader This should reboot your phone to a white menu, once it is there, continue.
fastboot devices This should return your phone's serial number.
fastboot flash recovery recovery.img This might take a while, be patient and do not interrupt it. Once it is done, use the volume buttons on your phone to navigate through the menu until RECOVERY is highlighted, then press Power to select it. Your phone will reboot into another menu, once it shows up, select "install from sdcard" then "choose zip from sdcard," then scroll down and select CWM-SuperSU-v0.94.zip, and accept it. Once it is finished, press power then select reboot. Once you are fully booted, continue with the instructions.
adb push misc_version /data/local/tmp/misc_version
adb shell chmod 777 /data/local/tmp/misc_version
adb shell /data/local/tmp/misc_version -s 2.18.605.3
adb reboot bootloader This will reboot you to the white menu again.
fastboot devices Result should be your phone's serial number.
fastboot getvar mainver Result should be 2.18.605.3. If it isn't, make sure you didn't get any errors in the above code and everything was copied correctly.
fastboot oem lock
fastboot erase cache
fastboot oem rebootRUU
fastboot flash zip RUU_Vivo_W_Gingerbread_S_VERIZON_WWE_2.18.605.3_Ra dio_1.09.01.0622_NV_VZW1.92_release_199487_si.zip This will take a while, be patient and do not under any circumstances interrupt it.
fastboot erase cache
fastboot oem rebootRUU
fastboot flash zip 1.09.01.0312_vivow_Radio_PG32IMG.zip This will also take a bit, again, do not interrupt it.
fastboot reboot
That's the end of the code, you should be downgraded and can now get S-OFF by following the Revolutionary guide in the first post.
After S-OFF(ASO)So, now you have S-OFF. Congratulations! The next step would be to flash a custom recovery, then either an su zip or a custom, rooted ROM. For recoveries, the choices are ClockworkMod, 4EXT or TWRP. I personally prefer 4EXT, but TWRP is also great and has many great features. ClockworkMod is a little slower, but still stable. All ROMs and recoveries for the Dinc2 can be found in the development forums (where you found this guide), and there are many different ROMs to choose from, so check them out! If you want something rock solid and completely stable, try out CondemnedSoul's CM7 or one of the Gingerbread Sense ROMs, or if you want something newer, a bit faster, but maybe has a few minor bugs, check out one of the many ICS ROMs. If you want the latest and greatest, with a few slight bugs, go Jelly Bean with aeroevan's CM10. If you were looking to just root, download and flash the zip found here: http://forum.xda-developers.com/showthread.php?t=1538053, however, I would recommend that you try one of the Gingerbread Sense ROMs such as Skyraider Zeus if you wanted something a bit different with extra features, or andybonestock for a faster, debloated ROM that looks and feels exactly like what you're used to, but rooted.

Nice guide. I have to use the tacoroot method for a buddy of mine.

Awesome post!

This should be stickied...

sk842018 said:
This should be stickied...
Click to expand...
Click to collapse
+1 ^^
Sent from my Kang Banged Dinc2

Consider it done, excellent resource :good:
Also added to roll-up.

Bad links for Tacoroot.sh and .0312 radio. Great wright up though and cant wait to get my replacement unlocked.
Edit: Ok so I am almost there but have run into some issues. I cant get the 2.3.3 RUU to flash. It will get so far and stop saying bad signature verification. The one thing I noticed is that at the end of the file name it has si and not signed. I tried to change it but kinda knew that would not work and it didn't. Hope this can be fixed soon.
Edit of the edit. Ok so I followed dets34's wright up as I could not get the commands posted here to work. I put the files in the proper SDK folders and went through the commands and when I got to the RUU I hit tab after starting the name to make sure the end was si.zip. Flashed went into boot loop, boot recovery, flash newest radio, and bam no more loop with S off. Thanks to everyone who keeps us sorted out and flashing strong.

zackspeed said:
Bad links for Tacoroot.sh and .0312 radio. Great wright up though and cant wait to get my replacement unlocked.
Edit: Ok so I am almost there but have run into some issues. I cant get the 2.3.3 RUU to flash. It will get so far and stop saying bad signature verification. The one thing I noticed is that at the end of the file name it has si and not signed. I tried to change it but kinda knew that would not work and it didn't. Hope this can be fixed soon.
Edit of the edit. Ok so I followed dets34's wright up as I could not get the commands posted here to work. I put the files in the proper SDK folders and went through the commands and when I got to the RUU I hit tab after starting the name to make sure the end was si.zip. Flashed went into boot loop, boot recovery, flash newest radio, and bam no more loop with S off. Thanks to everyone who keeps us sorted out and flashing strong.
Click to expand...
Click to collapse
Links work fine for me. What did you do differently with dets34's tutorial?

The only thing that was different was I put misc and taco files in AndroidSDK\platforms. Then I put the RUU in the tools folder. Ran the commands and it went through first try. For the first part I cd c:\ to my platforms folder and ran the first part then cd c:\ to my tools folder and installed the RUU. Once it booted as soon as I messed with it boot loop. So flashed the radio and all seems to be fine.

zackspeed said:
The only thing that was different was I put misc and taco files in AndroidSDK\platforms. Then I put the RUU in the tools folder. Ran the commands and it went through first try. For the first part I cd c:\ to my platforms folder and ran the first part then cd c:\ to my tools folder and installed the RUU. Once it booted as soon as I messed with it boot loop. So flashed the radio and all seems to be fine.
Click to expand...
Click to collapse
Shouldn't make a difference if you added those folders to your PATH variable, that way you can use adb/fastboot commands without having to cd in.

Yea that's kinda what I thought but some how I messed it up or something because it never would flash the RUU. I am no expert at this by any means. Either way you helped out and its nice to see we don't have to worry about loops any more. :good:

Great guide, thanks! My couple of things I had to add in to make everything work:
Code:
fastboot flash zip RUU_Vivo_W_Gingerbread_S_VERIZON_WWE_2.18.605.3_Radio_1.09.01.0622_NV_VZW1.92_release_199487_si.zip
I had to add the path to this file for it to work and then afterward do a
Code:
adb reboot
to get ready for the Revolutionary process. At first Revolutionary wouldn't recognize the device when it booted. I quickly realized I needed to re-enable USB Debug.
Then I used adb to do the rebooting necessary to flash the .0312 radio.
Thanks again! Great stuff.

techspecs said:
Great guide, thanks! My couple of things I had to add in to make everything work:
Code:
fastboot flash zip RUU_Vivo_W_Gingerbread_S_VERIZON_WWE_2.18.605.3_Radio_1.09.01.0622_NV_VZW1.92_release_199487_si.zip
I had to add the path to this file for it to work and then afterward do a
Code:
adb reboot
to get ready for the Revolutionary process. At first Revolutionary wouldn't recognize the device when it booted. I quickly realized I needed to re-enable USB Debug.
Then I used adb to do the rebooting necessary to flash the .0312 radio.
Thanks again! Great stuff.
Click to expand...
Click to collapse
Updated, thanks.

Thanks for your guide. Will this guide work with the newest firmware 5.10.605.9? Just use TACOROOT?

leshan said:
Thanks for your guide. Will this guide work with the newest firmware 5.10.605.9? Just use TACOROOT?
Click to expand...
Click to collapse
Use the downgrade tool.
Sent from my vivow using Tapatalk 2 Beta-5

leshan said:
Thanks for your guide. Will this guide work with the newest firmware 5.10.605.9? Just use TACOROOT?
Click to expand...
Click to collapse
The latest firmware is 6.01.605.05. You don't have to use tacoroot.

Thanks. worked perfectly.
prototype7 said:
Use the downgrade tool.
Sent from my vivow using Tapatalk 2 Beta-5
Click to expand...
Click to collapse

unroot to re-root correctly
Does anyone know a method to go back to stock on one of refurbed phones in order to re root correctly and not get the Sense bootloop? I found a few methods but they are all four hboot .97 and I have a feeling won't fix the problem.

mccarrel said:
Does anyone know a method to go back to stock on one of refurbed phones in order to re root correctly and not get the Sense bootloop? I found a few methods but they are all four hboot .97 and I have a feeling won't fix the problem.
Click to expand...
Click to collapse
Flash the latest firmware, or just flash whatever RUU then the .0312 radio, then follow the guide to go back to s-on.
Sent from my Incredible 2 using Tapatalk 2 Beta-5

[WIP] [TUT] How to Root HTC One Xv

Want closed till me and 8trix figure what the hboot update IMG is called
PLEASE HIT THANKS.... READ ALL BEFORE PROCEEDING
FIXED COMMANDS HAD A COMMON MISTAKES
Hi, I am a developer from the " HTC Droid Incredible 4G LTE " My Rom http://forum.xda-developers.com/showthread.php?t=2065615 and I am still a newbie at this developing thing.. So with this being said I am not resposable for anything that could or may happen.*
Now I'm this TUTORIAL I will be providing the links and the instructions on how to proceed on the rooting process
*Requirments*:
-Android SDK - http://developer.android.com/sdk/index.html
-HTC drivers -*http://www.htc.com/us/support/
-The Su .zip - attachment
-And.... The HTC One Xv of course.
STEPS:
1. On your computer make sure you have adb access ( usually just install android sdk )
2. Make sure you have HTC drivers installed ( remove HTC sync after the installment )
3. With that being said download the attachment file ( I downloaded the SU from*http://androidsu.com/superuser/ )
4. To makes matter safer your gonna need to Temp Root, download this : http://uploaded.net/file/h44f6vni
5.Once downloaded, unzip it to C:\Root. Navigate to the folder in the command Prompt by typing *please follow directions CLEARLY
- *cd c:\Root\stuff
- *adb devices
- *adb restore fakebackup.ab
DO NOT click OK to the restore on the device just yet! Now type:
- *adb shell "while ! ln -s
/data/local.prop /data/data/com.android.settings/a/file99; do
:; done"
(errors will appear, ignore) Accept the restore on the device, then type:
-adb reboot
(At this time, you are temprooted, and the phone UI will be in an unusable state, with temproot shell.) After reboot type:
- adb shell
Verify that the prompt is "#" (meaning root) or "$" (meaning normal user). If it's not "#", please start over. At this point, you can optionally do this ONLY if you want to revert changes:
- rm /data/local.prop
- exit
- adb reboot
Close cmd and start a new one then type
- adb devices
- adb install /system/apps/superuser.apk
- adb push su /system/bin or try adb push su /system/bin/su
6. - adb reboot
7. reboot twice, and if this don't work then please leave a comment and I will explain a new way.
ATTENTION
2nd way to try to root
1. On your computer make sure you have adb access ( usually just install android sdk )
2. Make sure you have HTC drivers installed ( remove HTC sync after the installment )
3. With that being said download the attachment file ( I downloaded the SU from*http://androidsu.com/superuser/ )
4.read carefully
5. create a folder were the superuser.apk and Su file is and name it system and inside that make a bin folder and place the Su file in the bin folder
6.Go to the folder were you extracted root folder in the last root alternative
7.Open cmd in that folder and make sure to extract the files ( superuser.apk and Su file to the root of the root folder )
8.Type : adb devices
9. Type: adb shell
10. Type: adb install ( locate were apk is on your pc.... Here is an Example of what ide put: adb install c:/root/nameOf app.apk , then press enter )
11. Type: adb push su /system/xbin or try adb push su /system/xbin/su or try adb push system/xbin/su /system/xbin/su
12. Use the following command to add the correct permissions to the su binary on the device adb shell chmod 6755 /system/bin/su
13. Adb reboot
Bringing Life To The " Vivid, Incredible 4g, One XV "... Oh yeah.!!

I'll try when I get ack home tonight,
thanks for this

avid.aria said:
I'll try when I get ack home tonight,
thanks for this
Click to expand...
Click to collapse
Download a ruu to be on the safe side too... There's 2 ways on how you could root
Bringing Life To The " Vivid, Incredible 4g, One XV "... Oh yeah.!!

Reserved

Another reserved

Hope this helps everyone

Not working
So after we spent all that time I thought we should update people that at least for me this doesn't seem to work, even when we get the UI to break and not show anything there's still no root access. For anyone that does this and breaks the UI, mine seems to come back after locking and unlocking the bootloader. The following commands will get you back to a good state:
Reboot into fastboot mode
Make sure you have the fastboot and Unlock_code.bin (you get that from HTC dev website, you probably already have it) files in the same directory and:
fastboot oem lock
Device reboots, go back to fastboot
fastboot flash unlocktoken Unlock_code.bin
To unlock it again, then it should restart and be factory reset, which works for me to get it functional again. Hope that helps.

8trix said:
So after we spent all that time I thought we should update people that at least for me this doesn't seem to work, even when we get the UI to break and not show anything there's still no root access. For anyone that does this and breaks the UI, mine seems to come back after locking and unlocking the bootloader. The following commands will get you back to a good state:
Reboot into fastboot mode
Make sure you have the fastboot and Unlock_code.bin (you get that from HTC dev website, you probably already have it) files in the same directory and:
fastboot oem lock
Device reboots, go back to fastboot
fastboot flash unlocktoken Unlock_code.bin
To unlock it again, then it should restart and be factory reset, which works for me to get it functional again. Hope that helps.
Click to expand...
Click to collapse
Me and you will work on finding a way
Bringing Life To The " Vivid, Incredible 4g, One XV "... Oh yeah.!!

but there is no support for unlocking the bootloader in htc dev , how did you do it ??

Both methods will not work.
1st method is designed for the Droid Incredible 4G LTE, not this phone.
2nd method requires to be rooted before you can even push files to the system folder.

hasoon2000 said:
Both methods will not work.
1st method is designed for the Droid Incredible 4G LTE, not this phone.
2nd method requires to be rooted before you can even push files to the system folder.
Click to expand...
Click to collapse
Yeah me and 8trix found this out.... We need a temp root or We need a costom recovery. And I have no experience on that
Bringing Life To The " Vivid, Incredible 4g, One XV "... Oh yeah.!!

lateral18 said:
but there is no support for unlocking the bootloader in htc dev , how did you do it ??
Click to expand...
Click to collapse
To unlock the bootloader is easy, its like any other htc. Go to htc dev site and choose "all other supported devices" and follow the guide. It'll give you the file to fastboot flash to unlock. We're just working on getting root now. HTC definitely did something different with this phone because none of the other methods seem to work. Seems like there are some smart dedicated people working with us so please be patient and keep a watch on this thread!

lateral18 said:
but there is no support for unlocking the bootloader in htc dev , how did you do it ??
Click to expand...
Click to collapse
Yes there is. Re check
---------- Post added at 06:07 AM ---------- Previous post was at 05:59 AM ----------
24ky said:
Yeah me and 8trix found this out.... We need a temp root or We need a costom recovery. And I have no experience on that
Bringing Life To The " Vivid, Incredible 4g, One XV "... Oh yeah.!!
Click to expand...
Click to collapse
I tried to help my friend before he brought it back his htc to [email protected] cuz he bricked his phone. I unlocked bootloader and tried to flash recovery with HTC ONE V recovery thinking it would be similar. It did brick my phone with a warning on boot though i flashed the recovery again with the recovery in sdk platform tools and no longer brick. I know this might not be useful though i think u can flash the recovery with different recovery's till u find one that works with htc one v x just use htc models. Also the ruu is out where is the link ?

flipinfin said:
Yes there is. Re check
---------- Post added at 06:07 AM ---------- Previous post was at 05:59 AM ----------
I tried to help my friend before he brought it back his htc to [email protected] cuz he bricked his phone. I unlocked bootloader and tried to flash recovery with HTC ONE V recovery thinking it would be similar. It did brick my phone with a warning on boot though i flashed the recovery again with the recovery in sdk platform tools and no longer brick. I know this might not be useful though i think u can flash the recovery with different recovery's till u find one that works with htc one v x just use htc models. Also the ruu is out where is the link ?
Click to expand...
Click to collapse
With ruu all will be fixed
Sent from my Incredible 4G LTE using xda app-developers app

jose51197 said:
With ruu all will be fixed
Sent from my Incredible 4G LTE using xda app-developers app
Click to expand...
Click to collapse
I wish that were true lol. I cant seem to get the ruu to run all the way even on an xp machine. I think once it finished sending but then errored out right after.
I have flashed a bunch of random recoveries and nothing seems to work, but none have bricked my phone, my recovery just doesn't work. If someone could decrypt the rom.zip from the ruu that would be awesome and we could make custom recovery from that right?
Ruu:
http://forum.xda-developers.com/showthread.php?t=2097438
If that doesnt work (looks like its not there), i have already extracted the encrypted rom.zip and put it on my web server here:
Http://pnxcloud.com/rom.zip

8trix said:
I wish that were true lol. I cant seem to get the ruu to run all the way even on an xp machine. I think once it finished sending but then errored out right after.
I have flashed a bunch of random recoveries and nothing seems to work, but none have bricked my phone, my recovery just doesn't work. If someone could decrypt the rom.zip from the ruu that would be awesome and we could make custom recovery from that right?
Ruu:
http://forum.xda-developers.com/showthread.php?t=2097438
If that doesnt work (looks like its not there), i have already extracted the encrypted rom.zip and put it on my web server here:
Http://pnxcloud.com/rom.zip
Click to expand...
Click to collapse
Did you relock before flashing ruu?
Sent from my HTC EVARE_UL using xda premium

jmztaylor said:
Did you relock before flashing ruu?
Sent from my HTC EVARE_UL using xda premium
Click to expand...
Click to collapse
I know this is old and not needed anymore since you're putting up root tomorrow, but I wanted to close this with yes, I did re-lock, and it kind of almost worked, like it finished sending the file, but then errored out with some other bs. No woory now though, I am back to fully stock unlocked and will test your root tomorrow if it's up then. Thanks again jmz, great work!

So... how do I get the UI working again? I'm stuck with an unusable UI ._. !

zeratos said:
So... how do I get the UI working again? I'm stuck with an unusable UI ._. !
Click to expand...
Click to collapse
Whats wrong?

None of the methods described on the main post work and I got stuck on the unusable UI, I google how to do a factory reset and now it's working again.
Thanks.
Also, is there a way to root this thing?

Develop Bugs

welcome