Develop Bugs

[Q]Help With Getting passed the adb loop step

Every since the root method came out, I've been trying to root my phone for hours and hours and I haven't been able to. Since this is a problem for quite a few other users, I figured we should have a thread just for this problem since the rooting thread is over 30 pages long at this point.
My problem is that I see the device in offline mode for a few seconds, and after that it displays an empty list again.
What I'd like to know from people who managed to root their phones, if they had to try something different from the instructions to get passed the adb loop step where you have to catch the device in offline mode? What OS are you running (Win, Mac, Linux and x86 or x64)? How many times did you try?

I got past the loop by hitting ctrl c as soon as it detected the device it worked for me. it seems if you let the loop continue and you get device not connected you have to try again. I was able to get this to work consistently twice.
Getting the adb portion of this is what took me the longest in the rooting process.

Had your same problem on Ubuntu
Had same problem on windows 7 64 bit
UNTIL:
installed pda net - then htc sync, then removed android device driver, then installed the (r3) driver from android sdk... the update you can download through their program.
After that it worked like a charm first time.
my best advice is to start running the loop just before you click recovery from the boot loader screen.
Once you got it, theres no need to be quick with control C - it stays there.
- Faylix / local

the PDANET program seems to mess with the offline loop thing.
Once I closed it, it goes through just fine..
The only problem im having is that im getting a E:Failid to verify whole-file signature when i push the update.zip
And also I've used both Windows 7 64bit and XP 32bit to no avail...

My guess is its all about the drivers. I must have mine all mixed up. I am stuck in loop with no device found either. I will try one more time with pdanet off but Ive tried on a pc without it too anyways.
Someone really needs to write an indepth guide like the G1 because drivers arent even meantioned in the guide and I know its a big part of it especially if you have had other android devices before with sdk plus adb. One thing I do notice is all of us with the loop issue have touble with the device showing in device manager. It displays android 1.0 instead of mts or adb whatever it supposed to be. If your device isnt recognized from hboot it wont make the proper jump into recovery. Hence the loop issue. Can anyone with root ellaborate this a bit more?

@jnight
You're very close. I had this happen to me too. What's happening to you is the first try failed but the update.zip still got pushed to the SD Card. Here's what you do:
1) adb push ota.zip /sdcard/update.zip
2) Type in "push update.zip /sdcard/" on your computer but don't push enter yet
3) Choose "install update.zip" in the phone. AS SOON AS the green bar appears behind the letters, press enter on your computer.
If you miss the timing and don't see clockwork recovery, you NEED to go back to my step 1("adb push ota.zip /sdcard/update.zip") or it will continue to fail no matter how many times you try because you HAVE to start with ota.zip as the update.zip on the SD card. The trick is getting the phone to verify the signature from the ota.zip and replacing it with update.zip to enter the clockwork recovery. Once you're in clockwork recovery, it's a breeze- just follow the rest of the stickied root tutorial. Hope this helped

shinkinrui said:
@jnight
You're very close. I had this happen to me too. What's happening to you is the first try failed but the update.zip still got pushed to the SD Card. Here's what you do:
1) adb push ota.zip /sdcard/update.zip
2) Type in "push update.zip /sdcard/" on your computer but don't push enter yet
3) Choose "install update.zip" in the phone. AS SOON AS the green bar appears behind the letters, press enter on your computer.
If you miss the timing and don't see clockwork recovery, you NEED to go back to my step 1("adb push ota.zip /sdcard/update.zip") or it will continue to fail no matter how many times you try because you HAVE to start with ota.zip as the update.zip on the SD card. The trick is getting the phone to verify the signature from the ota.zip and replacing it with update.zip to enter the clockwork recovery. Once you're in clockwork recovery, it's a breeze- just follow the rest of the stickied root tutorial. Hope this helped
Click to expand...
Click to collapse
You are a godsend. Spent the last two hours trying to time this just right by doing Step 2 and 3 over and over and over. 5 minutes after reading this post - Hello, Clockwork.

Lol
shinkinrui said:
@jnight
You're very close. I had this happen to me too. What's happening to you is the first try failed but the update.zip still got pushed to the SD Card. Here's what you do:
1) adb push ota.zip /sdcard/update.zip
2) Type in "push update.zip /sdcard/" on your computer but don't push enter yet
3) Choose "install update.zip" in the phone. AS SOON AS the green bar appears behind the letters, press enter on your computer.
If you miss the timing and don't see clockwork recovery, you NEED to go back to my step 1("adb push ota.zip /sdcard/update.zip") or it will continue to fail no matter how many times you try because you HAVE to start with ota.zip as the update.zip on the SD card. The trick is getting the phone to verify the signature from the ota.zip and replacing it with update.zip to enter the clockwork recovery. Once you're in clockwork recovery, it's a breeze- just follow the rest of the stickied root tutorial. Hope this helped
Click to expand...
Click to collapse
I was having some trouble to, I found something else that I was gonna add but it was only on my end... I didn't have the same problem rooting my wifes. I will watch this thread and if I see any more posts I will drop my piece. Im glad someone else could post this before I could.

shinkinrui said:
@jnight
You're very close. I had this happen to me too. What's happening to you is the first try failed but the update.zip still got pushed to the SD Card. Here's what you do:
1) adb push ota.zip /sdcard/update.zip
2) Type in "push update.zip /sdcard/" on your computer but don't push enter yet
3) Choose "install update.zip" in the phone. AS SOON AS the green bar appears behind the letters, press enter on your computer.
If you miss the timing and don't see clockwork recovery, you NEED to go back to my step 1("adb push ota.zip /sdcard/update.zip") or it will continue to fail no matter how many times you try because you HAVE to start with ota.zip as the update.zip on the SD card. The trick is getting the phone to verify the signature from the ota.zip and replacing it with update.zip to enter the clockwork recovery. Once you're in clockwork recovery, it's a breeze- just follow the rest of the stickied root tutorial. Hope this helped
Click to expand...
Click to collapse
Thanks Man, I guess I was pressing the Enter button to fast...
Got past eveything except the "SU" it says "Permission Denied"
NM about this post for some reason it started working after I installed "Setcpu". Went in to Terminal emulator and it gives me the # just fine..
For some reason its just ADB that gives Permission Denied..

"Step 18.
adb install Superuser.apk (If this looks like it works, but says it cannot locate directories, make sure you can find your device using adb devices… If things still don't work, my best advice is to start over)
Step 19.
After Superuser is installed try to use adb to shell to your device.
adb shell
you will get a $
Then type su
Superuser should pop-up asking if you give permission, do so.
Your $ should turn into a #. If so, you have root."
Make sure you run this or you wont get SU rights, this programs needs to be installed to allow the SU rights.

AngelsShadow said:
"Step 18.
adb install Superuser.apk (If this looks like it works, but says it cannot locate directories, make sure you can find your device using adb devices… If things still don't work, my best advice is to start over)
Step 19.
After Superuser is installed try to use adb to shell to your device.
adb shell
you will get a $
Then type su
Superuser should pop-up asking if you give permission, do so.
Your $ should turn into a #. If so, you have root."
Make sure you run this or you wont get SU rights, this programs needs to be installed to allow the SU rights.
Click to expand...
Click to collapse
Thank you thank you....
I've been repeating myself over and over regarding this...
It's the Number 1 issue why people can't Root & Flash to the ENGINEER Build!!

Still a no go
Marvin,
I am still getting the two device OFFLINE showing after going into recovery from hboot. I deleted ALL of the HTC SYNC software and drivers and ONLY installed PDAnet. I now can see the MY TOUCH SLIDE device when connected in hboot, unfortunately I still am having the same stupid problem. So since it's not showing android 1.0 anymore and still having the same problems, we might have to explore some other avenues. FOR THE LOVE OF ROOT SOMEONE PLEASE HELP US!!!

If you run loop and go to recovery and only see the device offline a couple times then it goes away, I do not think it is a driver issue at that point. As someone in the root thread explained, the loop is simply trying to catch the device in ADB mode as it's going into recovery. And then, randomly, it will "stick" in ADB mode. Now, I am not sure if there is a difference between our devices for those of us having trouble getting the ADB mode to stick.

Ok, I'm giving up. I have tried this hundreds and hundreds of times. I know I've followed the instructions the correct way (I've seen the video and read countless forum posts). This simply cannot be done on my phone. I am going to take it to the store and try to exchange it, perhaps for a black one.
Does anyone else have any suggestions?

as i posted in the other thread i was having problems trying to get adb "stick" open when i went from the bootloader into recovery so i went into the file explorer and right clicked on my computer then went to manage devices then went to the driver tab then clicked on update driver right before i went into recovery and this is what finally worked for me. the purpose wasnt to change the driver the purpose was to trick my computer into keeping adb open

Re: Getting passed the adb loop step
I had to hit power on phone and enter on pc at almost the same time to get it working. Then I realized that after you reboot, it boots back to your normal phone not recovery and then adb devices it shows up.
-------------------------------------
Sent via the XDA Tapatalk App

Re: Getting passed the adb loop step
Ugh none of these tricks have worked for me.. Still Stuck .. Maybe it's a computer issue.. Guess ill try a friends computer..
-------------------------------------
Sent via the XDA Tapatalk App

Maybe/hopefully someone will find a different/easier way to root these for those of us stuck here. I've also tried, exhausting many many things, everything from timing of hitting loop/recovery, all the way to almost completely breaking the ADB driver on my PC. This is thoroughly frustrating the hell out of me.

By the way, add "ECHO OFF" (without the quotes) to the top of the batch file. It makes it easier to see when it reads out the offline devices.

Re: Getting passed the adb loop step
If you go to settings then pc connection . What seeting should it be? Drive , sync, or charge?
-------------------------------------
Sent via the XDA Tapatalk App

A little help needed, Am I still rooted?

I rooted my phone on June 16, a couple weeks ago. I had to factory reset my phone. Everything on the phone and memory card was erased other than Superuser Permissions. Superuser Permissions still shows up on my home screen.
Because SU is still there, am I still rooted? If so what do I need to put back on my memory card for everything to work properly?
I can't get into ADB Shell anymore either, I've tried all day and nothing has helped. I guess I got really lucky.
If I'm still rooted, is there an easier way to get into ADB Shell? Also if I am still rooted, how exactly to I do a NAND? And by doing this, will it make it easier to get into ADB Shell?
I know these are probably basic questions for some, but I would really like a little help to get a step in the right direction. I really appreciate anyone's help and knowledge on this.

travazz said:
I rooted my phone on June 16, a couple weeks ago. I had to factory reset my phone. Everything on the phone and memory card was erased other than Superuser Permissions. Superuser Permissions still shows up on my home screen.
Because SU is still there, am I still rooted? If so what do I need to put back on my memory card for everything to work properly?
I can't get into ADB Shell anymore either, I've tried all day and nothing has helped. I guess I got really lucky.
If I'm still rooted, is there an easier way to get into ADB Shell? Also if I am still rooted, how exactly to I do a NAND? And by doing this, will it make it easier to get into ADB Shell?
I know these are probably basic questions for some, but I would really like a little help to get a step in the right direction. I really appreciate anyone's help and knowledge on this.
Click to expand...
Click to collapse
easiest way to know if you are still rooted is to download android terminal emulator from the market and type in su on the screen... if you get a # sign then you have root... if you get permission denied then you don't.
find that out first then we can answer the other questions.

Downloaded it, typed in su, Superuser Permissions came up on my phone, I allowed it. After I typed su, # showed up underneath it

travazz said:
Downloaded it, typed in su, Superuser Permissions came up on my phone, I allowed it. After I typed su, # showed up underneath it
Click to expand...
Click to collapse
You're in good shape. If you're looking to get into adb shell, you might as well go the whole nine yards and dl the recovery installer from unrevoked, it will install custom recovery and once you get that you can boot into the custom one and adb shell from there without having to do the SD card stuff over and over again.

viccyran said:
You're in good shape. If you're looking to get into adb shell, you might as well go the whole nine yards and dl the recovery installer from unrevoked, it will install custom recovery and once you get that you can boot into the custom one and adb shell from there without having to do the SD card stuff over and over again.
Click to expand...
Click to collapse
Where do I get the custom recovery file and how do I install it/use it?
Sorry that these are really dumb questions, but now that I know I still have root, this is getting exciting again.

See the stickied thread recovery reflash tool.
-------------------------------------
Sent via the XDA Tapatalk App

Now I'm trying to follow the recovery steps and I'm having the following errors. Can anyone please help?
When I try to install the modified USB drivers I receive the following errors:
Error 0x80004005: Unspecified error on these specific dll files.
WdfCoInstaller01007.dll
WUDFUpdate_01007.dll
WUDFUpdate_01007.dll
When I go to install the reflash-bundle, everything installs, but it fails installing the reflash.exe saying that the file is corrupt.
I'm using Windows 7 Ultimate x64, if that helps out

This is a development sub-forum. Please post your questions in the General section. Thanks.

[Guide] How to recover your semi-brick

YES YOU NEED TO READ THIS WHOLE POST, PROB MORE THEN ONCE TO MAKE SURE YOU GOT IT. YES I KNOW HOW LONG IT IS, I TYPED IT!
*Also note that not all sections will apply to you. I have tried to seperate different senerios using * at each one. Also more then one section here may be needed by you.
the reason i call it a semi-brick is because a true brick can bot be recovered with out opening the case.
first go here and read this for info: http://forum.xda-developers.com/showthread.php?t=838484
now since your here im going to assume that its too late.
*things you will need.
copy of cwm recovery. get it here (the manual install link): http://forum.xda-developers.com/showpost.php?p=9145724&postcount=28
adb installed and working.
a known good rom, or nandroid backup. here is one: http://forum.xda-developers.com/showthread.php?t=836042 (use odex one)
a wpthis.ko for YOUR specfic kernel (run (adb shell cat /proc/version) that will tell you what kernel you have)
*first thing we need to know is, are you s-off or s-on now?
if your s-off just boot into clockwork mod recovery, wipe the phone and flash a known good rom and be done with it. if you dont have cwm recovery installed. boot into fastboot (vol down+power) you must have the sdk/adb installed and working, and type fastboot flash recovery LocationOfRecovery.img (where LocationOfRecovery.img= where you have the recovery, ie c:\android\recovery.img). once thats installed follow instructions above.
*if you are s-on:
will the phone boot into android? if so your not bad off.
if you want to unroot to return the phone, follow the unroot thread here: http://forum.xda-developers.com/showthread.php?t=835971
if you dont want to unroot then you have a couple of different options. if you have cwm recovery still installed, just follow instructions above and flash a known good rom. ive been told that boot.img (kernel) wont flash if you are s-on. the way to fix this (temporarily) is boot into recovery, but before you flash run these commands:
(put wpthis.ko in sdk folder)
adb remount
adb push wpthis.ko /data/local/wpthis.ko (specific for your kernel)
adb shell
# insmod /data/local/wpthis.ko (should get same function not implemented error as when u rooted first time)
then proceed to flash the rom. once booted into android skip down to, "now to get back to s-off"
*if you have stock or eng-recovery installed.
will the phone attempt to boot android at all? where is it stuck at?
a good min after it starts to try to boot, type these commands:
adb remount
adb shell
if you can get in shell then theres still hope. back out shell for a second and start here:
put the cwm recovery.img and wpthis.ko in your sdk folder
adb remount
adb push wpthis.ko /data/local/wpthis.ko (specific for your kernel)
adb push recovery.img /data/local/recovery.img
adb shell
# insmod /data/local/wpthis.ko (should get same function not implemented error as when u rooted first time)
# dd if=/data/local/recovery.img of=/dev/block/mmcblk0p21 (now wait a min or 2 to give it time to finish)
#sync (give it another min or to just to be safe)
#reboot recovery
at this point you should be in cwm recovery. follow instructions above for flashing with s-on.
*if you cannot get into shell while booting, but have eng-recovery installed, there might be some options.(however this is all theory)
boot into recovery-
if you are on linux using adb, you can try taking sh from /system/bin folder of any custom rom, chmod 0755 it, then push it to /system/bin and adb shell might work.
windows-
boot into recovery.
a system.img compatible with your installed kernel pushed may work. put the system.img into the sdk folder.
adb push system.img /data/block/mmcblk0p25
then reboot and see where you are. if that dont work, grab the modified miscnew.img here: http://www.4shared.com/file/pUPfrGi-/mmcblk0p17.html
rename it misc.img put it in sdk folder and
adb push misc.img /dev/block/mmcblk0p17
then reboot into bootloader with PC10IMG.zip on root of sdcard and it should run though. if it does your fully stock and get to start all over again.
*if you cannot get into shell, and you have stock recovery, s-on, and post OTA, im sorry your pretty screwed. as of right now the only thing thats gonna bring it back is a full img/update signed from htc thats equal to or higher then the version currently on the phone. (well and jtag of course)
*well now you've done one of the steps above. your booted into android, you have perm root, and cwm recovery installed, just still s-on. dont worry your almost there!
first take that wpthis.ko for you kernel and push it, and the eng hboot.
adb push wpthis.ko /data/local/
adb push hboot-eng.img /data/local
then from adb shell, or terminal root prompt:
# insmod /data/local/wpthis.ko (again you should get the function not implemented error)
NOW REMEMBER THIS NEXT STEP COULD MEAN DEATH FOR YOU G2 IF TYPED WRONG, AND AFTER ALL THIS HARD WORK!
# dd if=/data/local/hboot-eng.img of=/dev/block/mmcblk0p18
wait a few mins to be sure its done.
# sync
wait a few more just cause.
reboot, you should now be s-off, cwm recovery installed, and free to do whatever you want. just dont go screwing it up again
* as new methods are discovered, or ones here are proven wrong, i will update as necessary. as of the writing post, 2 devices that i know of have been saved!
good luck!
wpthis.ko for bacon bits.03 kernel: http://www.4shared.com/file/OAcd1bix/wpthis-263221-cyanogenmod.html

before you post with problems make sure you have read this at least 2 times. have this info in you post:
what was the last running rom/kernel combo you had?
list EVERYTHING you have done since that point
which recovery is installed?
what happens in recovery when you type
adb devices?
adb remount?
adb shell?
does it try to boot? is it stuck on splash screen, or does it make it to boot animation? 1 min after you turn it on, what happens when you type:
adb devices?
adb remount?
adb shell?

Thank you, really, for taking the time to write this guide. I shared that dreadful feeling of a brick a little while ago, but made it out alive. I know this will help a lot of people.

I'm not bricked, semi bricked or none of that. Rootrd and running BB 0.3
This is the best guide to everything you would need. Too bad you can't post this at the beginning of every thread or some kind of link on every page. This would answer a lot of question if some people would look hard enough. I'm not some smart phone guy by no means. I just read a lot before I ask. In my further reading I can direct people.with further problems here.
Thanks for all your work and giving me another fun hobby
Peace
Sent from my T-Mobile G2 using XDA App

Question why is it that you have "dd if....../mmcblk0p21" in one area and towards the bottom you have "May brick phone ...dd if...../mmcblk0p18." Thought it should always be .../mmcblk0p18?
Phone: T-Mobile G2/Vision Rooted
Rom: Latest Cyanogen
Recovery: CWM waiting for Amon_RA

Good point . Not sure on that one
Sent from my T-Mobile G2 using XDA App

renn9420 said:
Question why is it that you have "dd if....../mmcblk0p21" in one area and towards the bottom you have "May brick phone ...dd if...../mmcblk0p18." Thought it should always be .../mmcblk0p18?
Phone: T-Mobile G2/Vision Rooted
Rom: Latest Cyanogen
Recovery: CWM waiting for Amon_RA
Click to expand...
Click to collapse
if you look where im saying /mmcblk0p21 we are replacing RECOVERY with CWM. i do that because i just dont like the idea of trying to replace hboot from a looping system. worst case something goes wrong, you still have hboot and you can try again. screw up hboot, game over! then once android is back up and running we worry about hboot on mmcblk0p18.

you should not state that steps can be changed if people are brave, someone is going to sip parts and cry that their hboot is boned and now they have a BRICK, this is the best post i have seen in the G2 section thus far and i have been through almost every thread(with any kind of importance) in the dev section and 90% of them in general and Q&A. thank you for this post and let's hope people READ at least 5 times before even starting on this.

Gotcha
Phone: T-Mobile G2/Vision Rooted
Rom: Latest Cyanogen
Recovery: CWM waiting for Amon_RA

Amazing guide, thanks a lot.
fastludeh22 said:
the reason i call it a semi-brick is because a true brick can bot be recovered with out opening the case.
Click to expand...
Click to collapse
I have a full, honest-to-god brick in my drawer (executed dd if=/sdcard/hbooteng.img of=/dev/block/mmcblk0p18 with a wrong "hbooteng.img file).
I'm really, really interested in some guide or info about how to try and recover the brick. I don't mind if I have to open the case, there's not going down from where I am right now.
By the way, my second DZ just arrived, tomorrow I'll try to S-OFF it again... I will have nightmares tonight.

reycat said:
Amazing guide, thanks a lot.
I have a full, honest-to-god brick in my drawer (executed dd if=/sdcard/hbooteng.img of=/dev/block/mmcblk0p18 with a wrong "hbooteng.img file).
I'm really, really interested in some guide or info about how to try and recover the brick. I don't mind if I have to open the case, there's not going down from where I am right now.
By the way, my second DZ just arrived, tomorrow I'll try to S-OFF it again... I will have nightmares tonight.
Click to expand...
Click to collapse
Well it will take a jtag and a lot of research, since it hasn't been done to a g2 yet. Search g1 development forum dor debricking if u want an idea of what's involved.
I remember talking to gtrab a little about your problem. So did you use the wrong file, or did you type an address wrong? What file or typo was it exactly?
What happens when u try to boot into fastboot, or anything else?

{golf clap} on the post.
you sir, have incredible patience... and it's truly appreciated.

fastludeh22 said:
Well it will take a jtag and a lot of research, since it hasn't been done to a g2 yet. Search g1 development forum dor debricking if u want an idea of what's involved.
Click to expand...
Click to collapse
Mmm... It seems all of it is quite a bit over my head.
I remember talking to gtrab a little about your problem. So did you use the wrong file, or did you type an address wrong? What file or typo was it exactly?
What happens when u try to boot into fastboot, or anything else?
Click to expand...
Click to collapse
Don't ask me how I did it, but I actually downloaded a web page instead of the actual hboot file I should have used . I did it from the phone and didn't notice. Since I was supposed to rename it to make the typing easier, I didn't notice it was the wrong file.
Anyway, right now the phone is a complete brick. It doesn't respond to any button presses, the LED doesn't do anything when you plug in the charger... A complete brick.

Device offline?
fastludeh22 said:
before you post with problems make sure you have read this at least 2 times. have this info in you post:
what was the last running rom/kernel combo you had?
list EVERYTHING you have done since that point
which recovery is installed?
what happens in recovery when you type
adb devices?
adb remount?
adb shell?
does it try to boot? is it stuck on splash screen, or does it make it to boot animation? 1 min after you turn it on, what happens when you type:
adb devices?
adb remount?
adb shell?
Click to expand...
Click to collapse
Never used ADB before, followed [forum wont let me post outside links] to set it up. when typing adb devices while in recovery mode, get "list of devices attached
HT09PR204734
offline."
here is a screen shot : [forum wont let me post)
running windows 7 64bit...device not recognized by ADB at alll when stuck on splash screen....did some research couldnt find a real solution...soooo what do you recommend trying?

im stuck on the splash screen.. and i cant get adb to work either.. is missing a driver but i cant for the life of me find one ...

-FuRBz- said:
im stuck on the splash screen.. and i cant get adb to work either.. is missing a driver but i cant for the life of me find one ...
Click to expand...
Click to collapse
Download and instal PDANet, that gave me the drivers i needed for adb, now if only i could figure out how to get my device to register online through the ADB command interface.....

^^ you my friend are awesome! dl pdanet, was able to get the drivers.. was able to go into bootloader and did a recovery from there.. im up and running again!!

marley097 said:
Never used ADB before, followed [forum wont let me post outside links] to set it up. when typing adb devices while in recovery mode, get "list of devices attached
HT09PR204734
offline."
here is a screen shot : [forum wont let me post)
running windows 7 64bit...device not recognized by ADB at alll when stuck on splash screen....did some research couldnt find a real solution...soooo what do you recommend trying?
Click to expand...
Click to collapse
Sounds like you have stock recovery installed, with s-on and no adb/shell access, I'm sorry your pretty screwed. You can try factory reset and see if that helps boot, or to get adb access while trying to boot. Other then that, at the moment the only way to recover is a offical signed pc10img of version equal to or higher then what you have. I'm working hard to come up with something, ill keep you guys informed. I think u said in pm, you have already done the OTA, which makes you version number 1.22.something.
-FuRBz- said:
^^ you my friend are awesome! dl pdanet, was able to get the drivers.. was able to go into bootloader and did a recovery from there.. im up and running again!!
Click to expand...
Click to collapse
Glad you got it! After drivers installed, did you fix it per a section of the op?

it all happened because i had tried flashing cm 6.1- it got stuck on the splash screen but i had done a recovery prior to trying to flash... once i got the drivers installed i was able to get in to adb and do a reboot-bootloader and was able to get into the recovery file

fastludeh22 said:
Sounds like you have stock recovery installed, with s-on and no adb/shell access, I'm sorry your pretty screwed. You can try factory reset and see if that helps boot, or to get adb access while trying to boot. Other then that, at the moment the only way to recover is a offical signed pc10img of version equal to or higher then what you have. I'm working hard to come up with something, ill keep you guys informed. I think u said in pm, you have already done the OTA, which makes you version number 1.22.something.
Click to expand...
Click to collapse
Lame....so how often do they release official pic10img's....? are we talkin a month....or a year?

[Q] adb remount

Rooted with this method completely stock kernel...
Ok I am new to Samsung but not new to rooting and using adb. I have been searching and maybe I missed something but I can not get adb working properly on my phone and pc. adb remount does not work so I can not push any files over. I have tried all the methods with mount -o rw,remount -t yaffs2 ... etc...
I can get su permissions on the phone but it will not allow me to transfer any files over at all. I even tried to r/w permission with Root Explorer while connected to phone through cmd window and nada. I am not running CWM so I would like to push files over if I can. I have done it the root explorer way of copy and paste its just that way seems so sloppy to me.
Any help would be appreciated since I cant seem to find a method on the web that works for me
Thanks guys

How are you typing the push command? Remember there are 2 sdcards on this phone.
For the internal sdcard
Code:
adb push c:\this\place /sdcard
for the external sdcard
Code:
adb push c:\this\place /sdcard/external_sd
You *shouldn't* have to use mnt/sdcard/external_sd but give it a shot just to be sure.
Doesn't this phone have to be on for ADB to work? I thought I read that. Obviously that seems a bit odd since most have to be in recovery. Or am I wrong about the on part?
Lastly, if you can run 'adb shell' then use the 'cp' or 'mv' commands to get the files on there.
EDIT: Ok, I completely just misread your post. You're trying to write to the /system? Try mount -o remount,rw /system
I don't know why everyone uses the yaffs, mmcblk, and all the other craziness. You still mount /system just with more typing. Let me know if it works.

KCRic said:
How are you typing the push command? Remember there are 2 sdcards on this phone.
For the internal sdcard
Code:
adb push c:\this\place /sdcard
for the external sdcard
Code:
adb push c:\this\place /sdcard/external_sd
You *shouldn't* have to use mnt/sdcard/external_sd but give it a shot just to be sure.
Doesn't this phone have to be on for ADB to work? I thought I read that. Obviously that seems a bit odd since most have to be in recovery. Or am I wrong about the on part?
Lastly, if you can run 'adb shell' then use the 'cp' or 'mv' commands to get the files on there.
Click to expand...
Click to collapse
tried cp and mv still gave me problems moving file. I forget the error message I got. Also I know the proper push commands I used to do it with my Evo all the time. Its just that this phone wont let me mount system. What do you mean be on ADB?

playya said:
tried cp and mv still gave me problems moving file. I forget the error message I got. Also I know the proper push commands I used to do it with my Evo all the time. Its just that this phone wont let me mount system. What do you mean be on ADB?
Click to expand...
Click to collapse
I meant the phone needs to be on (with debugging selected) in order to use ADB and write to it. At least that's what I think I remember seeing. Could be wrong since I haven't used ADB with this phone yet.

KCRic said:
I meant the phone needs to be on (with debugging selected) in order to use ADB and write to it. At least that's what I think I remember seeing. Could be wrong since I haven't used ADB with this phone yet.
Click to expand...
Click to collapse
correct all that has been done... all the basics you can think of have been done but it just keeps failing on adb remount
adb shell
$ su
#
no problem now, at first yes but I still cant mount system... driving me nuts since I dont use Clockwork right now I want to push files over... and my software on my pc AndroidCommander says NORoot has been obtained....

I'm probably as new to this phone as you are. Mostly just dealt with HTC. Past this point I have no idea what's going on. I can write to my /system - no problem. Hopefully one of the more seasoned guys will jump in here soon. Sorry I'm not much more of a help.

KCRic said:
I'm probably as new to this phone as you are. Mostly just dealt with HTC. Past this point I have no idea what's going on. I can write to my /system - no problem. Hopefully one of the more seasoned guys will jump in here soon. Sorry I'm not much more of a help.
Click to expand...
Click to collapse
what method did you use to root with... Is it the same as what I used the deoxeded stock method I posted above

Did u try with the Odin method? way easier.
Sent from my Galaxy SII √Epic4G Touch

skykc0401 said:
Did u try with the Odin method? way easier.
Sent from my Galaxy SII √Epic4G Touch
Click to expand...
Click to collapse
Odin method to do what? root? If so that is how I rooted thanks
I downloaded an app on the market that fix it.. thanks guys

[Q] Bricked need help....

So I was loading a new cm9 rom last night and everything seemed fine until reboot now its stuck at the roms boot screen...
So I attempted to get it to reboot to recovery or fast reboot no dice...
went through all the forums and couldnt get anythign to work...
adb devices sees my kindle fine...
i can adb shell and do a ls and it see directorys and i can cd to a different directory...
and time i try too do the commands to push fbmode or any of that i always get
failed to copy 'fbmode' to '/data/local/temp': No such file or directory
if i try to put it in a different directory or mkdir through shell i get an error for read-only file system
someone please help me out here...

First of all, what recovery are you using?

Bornxero said:
So I was loading a new cm9 rom last night and everything seemed fine until reboot now its stuck at the roms boot screen...
So I attempted to get it to reboot to recovery or fast reboot no dice...
went through all the forums and couldnt get anythign to work...
adb devices sees my kindle fine...
i can adb shell and do a ls and it see directorys and i can cd to a different directory...
and time i try too do the commands to push fbmode or any of that i always get
failed to copy 'fbmode' to '/data/local/temp': No such file or directory
if i try to put it in a different directory or mkdir through shell i get an error for read-only file system
someone please help me out here...
Click to expand...
Click to collapse
/data/local/tmp not /data/local/temp

soupmagnet said:
First of all, what recovery are you using?
Click to expand...
Click to collapse
think i was using cwm cant remember for sure but i cant get it to boot into anything but the cm9 bootscreen...
and tmp vs temp doesnt matter...all directories show either no such directory or read only system

Bornxero said:
think i was using cwm cant remember for sure but i cant get it to boot into anything but the cm9 bootscreen...
and tmp vs temp doesnt matter...all directories show either no such directory or read only system
Click to expand...
Click to collapse
It is important to know because the newer ICS roms won't work with CWM, only TWRP.

from the screenshots ive seen of twrp looks like it was cwm...I just want to be able to restore to stock first then I'll do another rom via twrp...

I previously loaded the hellfire ICS without issue as well...

Hey is it a 3.0 kernel from like energy's, I ,may have your answer then. I just need to know if thats the issue you are having.
Sent from my Amazon Kindle Fire using Tapatalk 2

Bornxero said:
I previously loaded the hellfire ICS without issue as well...
Click to expand...
Click to collapse
How recently? Trust me, from what I've seen here, you need TWRP. None of the 3.0 kernel based ICS roms work well or at all with CWM these days, including Hellfire.

Bornxero said:
So I was loading a new cm9 rom last night and everything seemed fine until reboot now its stuck at the roms boot screen...
So I attempted to get it to reboot to recovery or fast reboot no dice...
went through all the forums and couldnt get anythign to work...
adb devices sees my kindle fine...
i can adb shell and do a ls and it see directorys and i can cd to a different directory...
and time i try too do the commands to push fbmode or any of that i always get
failed to copy 'fbmode' to '/data/local/temp': No such file or directory
if i try to put it in a different directory or mkdir through shell i get an error for read-only file system
someone please help me out here...
Click to expand...
Click to collapse
I would try to use KF utility which is very useful for all kinds of issues with KF and very easy to use. It has helped me a great deal.

Yea its was a 3.0 kernel...gedeROM..

forest1971 said:
I would try to use KF utility which is very useful for all kinds of issues with KF and very easy to use. It has helped me a great deal.
Click to expand...
Click to collapse
I deff. tried everything in the kindle unbrick utility if thats what your talking about...

Bornxero said:
I deff. tried everything in the kindle unbrick utility if thats what your talking about...
Click to expand...
Click to collapse
I'm guessing you still have the stock bootloader ("kindle fire" bootlogo when the device first powers up) or you would have gotten yourself to recovery already. You'll want to try and get the bootmode changed to recovery and reboot like this...
Code:
adb shell idme bootmode 5001
adb reboot
If you can get back to CWMR, the first thing you should do is flash a new bootloader... probably FFF 1.4a that you can find in the dev section. Then use that to get into fastboot mode and flash TWRP.
If you cannot change bootmodes through adb. You'll have to push fbmode or rcmode in some writeable directory. I'm guessing /data/local/tmp doesn't exist in CM9, so try pushing it to /data instead.
If none of that works and my guess about your bootloader is right, you're going to need a factory cable.

kinfauns said:
I'm guessing you still have the stock bootloader ("kindle fire" bootlogo when the device first powers up) or you would have gotten yourself to recovery already. You'll want to try and get the bootmode changed to recovery and reboot like this...
Code:
adb shell idme bootmode 5001
adb reboot
If you can get back to CWMR, the first thing you should do is flash a new bootloader... probably FFF 1.4a that you can find in the dev section. Then use that to get into fastboot mode and flash TWRP.
If you cannot change bootmodes through adb. You'll have to push fbmode or rcmode in some writeable directory. I'm guessing /data/local/tmp doesn't exist in CM9, so try pushing it to /data instead.
If none of that works and my guess about your bootloader is right, you're going to need a factory cable.
Click to expand...
Click to collapse
w00t solved thanx....i was crying over here lol...
used this to put back the old rom I was using then used KFU to install twrp and installed the new rom without issue....
thanx again....