[Q] Kernels? who what when where why - Droid Incredible Q&A, Help & Troubleshooting

As far as kenrels are concenred the evironment seems to be much differnet than they were form the the phone i was on before. Questions as far as who's kerenels are for sense base, asop base. over clocking dosen't seem to go much higher than stock, where is a good pile of different kerenels, who is the most up to date aka best developer for them i've seeen ziggy and hydra who supports what, are there any others?

i use ziggy's Nov 14th build ,very smooth, decent battery life. - www.ziggy471.com
hydra i don't know if they are in development anymore. - www.hydrakernel.net
King had kernels, i don't know what happened to them or him (supposedly charging for downloading???) - http://kingxklick.com/forum/viewtopic.php?f=25&t=154
To be honest though the best battery life along with rapid charge times, IMO, was the stock .17 kernel from HTC. - search the forums and you should be able to find this one somewhere.
FYI - these are all sense based kernel's... if you are using an AOSP rom these WILL NOT work.

Related

Best rom for battery life

I just got my droid incredible and I rooted it as soon as I got it. I've tried almost every rom in the "official rom" thread. I can't seem to figure out which one is the best for battery life. Right now I'm on myns 5.2. Any insight would help.
Sent from my ADR6300 using XDA App
I was using miui au 1.1.7 and had great battery life. Miui isn't for everyone though. I just installed the latest cm7 gb build so well see
Sent from my ADR6300 using XDA App
It really depends on the kernel that is flashed with the ROM as well, in general ROM's that are AOSP tend to have better battery life because all the Sense stuff that syncs constantly can drain your battery, but alot of devs have found ways around this by getting rid of the extra Sense junk.
But IMO switching kernels gives the biggest difference
Happy Flashing
it trully is in the kernal and somewhat dependant on the rom.. like dude said.. warm is a badass rom.. i think i'm still using warm rls4, forget which kernal.. but find a decent one and use a cpu tool to setup profiles to control your kernals speed and usage.. with the right settings you can squeez some juice out...
lou's senseless rom with his #4 kernel is awesome
Skyraider 3.5 for sense or I'm having great battery life with cm7 w/ stock launcher (doubt it makes a difference on battery life but might)
Sent from my ADR6300 using Tapatalk
Like others have said, it's mostly about what kernel you are using. Some kernels reduce the amount of voltage the CPU uses to save battery as well as underclocking it when its not in use to save even more battery. I've used Skyraider 3.5 with Incredikernel and it has given me the best battery life, and I've used quite a few different kernels.
If you choose an AOSP ROM (like cyanogenmod) try invisiblek's kernel.
Best battery life to date is my current setup, Senseless Redemptive Revolution with Lou's #6. I can get 24-26 hours with normal usage not watching what I do. Recently, I reinstalled Juice Defender, and as I have always been a skeptic of it, if it is set up correctly, I am seeing a very noticeable increase in battery with no real side effects. FYI.
For Me, it was Cyanogen 6.1 stable and invisbilek's #28 for the kernel, but play around with it and see what works best for you, now that you are rooted, you can add any rom and kernel that you want and find out what works best for you, rembember, everyone's phone and usage are different, what works for me may not be best for you.
Thread closed.
Reason: The reason we close what's referred to as "Best ROM Threads" is because the vast majority of the type end up a nasty flame fest. The reasons should be obvious. It's really a matter of opinion, and then you get the fanboys of certain devs chiming in, and well, you get it. You did nothing wrong (besides posting in the wrong sub-forum). My advice is try a few and make that choice yourself. It's easy to find the most popular ATM, because they stay on page 1 of the dev sub. That doesn't necessarily make it the best, however. Give some a shot and see what's best for you. Good luck.
Your loving moderator

[Q] Suggestions on New ROM and Kernel

So I'm looking at putting a new ROM and kernel on my Evo. I've got Swagged Out Stock on it currently, but I'm not completely happy with it. I still want better battery life. And yes I run only 3G, Wifi/4G/Bluetooth/GPS turned off, the works. Battery life still sucks for me.
I find myself with a lot of choices here, though, and I'd just like some suggestions/opinions on the following ROMs. It's quite a chore to me having to switch ROMs and recustomize my phone each time.
Fresh Evo 4.2 (and the Fresh Toast kernel to go along with it)
CM7
EViO Series 3
Elite Series 3
MikG
Which ROM do you like and why?
Also, I have a question on the Freedom kernel. I might try it out, but there are different versions of it, Stock, More, Aggressive, etc. I looked around on the website and I can't find anything on the differences between each version. I get the gist by the name, but I want to know the actual differences. Can anyone help me out with that?
King bliss beta v7 with chopsuey kernal.I have not had any lag what so ever very smooth and fast.
Sent from my amazing Evo on king bliss beta v7
Used mikg with more freedom for while then switched to bliss
Sent from my amazing Evo on king bliss beta v7
Freedom Kernel: the names relate to the degree that they are undervolted. Stock is volted like the stock HTC kernel. Less is undervolted -75mv. More, undervolted -125mv. Aggressive, undervolted -175mv. Good thread to read about kernels here. Do not overclock when undervolted. Besides, overclocking is overrated. Underclocking your phone saves battery.
The ROMs you named are somewhat older, except for MikG and CM7.
MikG is sorta more recent, but it is at its "stable" point and shouldn't really receive any more updates.
CM7 is a work-in-progress. It is a never-ending process, but it is stable for Evo 4G. Always adding new stuff. It works very well, but some people say it is sorta bloated. Popular alternatives are Deck's AOSP and SalvageMod 1.4
EViO, Fresh and Elite are based on stock Evo 4G HTC Sense 1.0 stuff. EViO and Fresh are not really themed, only a few tweaks and few visual modifications. Elite is themed heavily (it is still Froyo-based).
They are all good ROMs. If you want heavily themed Elite, pair it with Netarchy-toastmod kernel. If you want a Gingerbread ROM, I suggest Poon or ChopSuey kernel.
Read my signature for suggestions.
Always read the OP and through comments. For example, Runnymede. You have to mount data in recovery before flashing a custom kernel.

Best rom/kernal combination

I'm pretty sure that this question has been posted alot of times but I need help deciding on a decent rom and a kernal which would go with it that has everything working and has the best battery life as well. I will probably get CM7 but idk which kernal will go best with it.
I also need help changing the LCD density of my screen. Before I switched to my EVO I owned a HTC HD2 and had pongsters hyperdroid on it which had lower LCD density allowing everything to be smaller on the phone.
Those are my questions please help. Thank you!
Sent from my PC36100 using xda premium
Not exactly sure what you mean by LCD density but I can help with the ROM kernel question.
As far as a ROM goes the best way to find the right one is to do 2 things.
1. Make a list of things you are looking for in a ROM. Stability, 4G, HDMI, Wireless Tether, etc. Then check out ROMs that contain stable versions with those features you emphasize.
2. Get flash happy. Flash a ROM, test it for a few days to a week and then flash another one. If you find yourself coming back to one specific ROM over and over again then that is probably the one you should stick with.
Check out this thread for some ROM ideas: http://forum.xda-developers.com/showthread.php?t=951057
A few ROMs that I didn't see mentioned in there are Myn's Synergy, Salvage-Mod, Sinister, Savaged Zen, and Swag.
As far as kernels go you have to remember a basic rule. Sense ROMs get paired with sense kernels and AOSP ROMs get paired with AOSP kernels. Then you do the same thing you did with the ROMs.
1. Make a list of what you want in a kernel. HAVS, SBC, overclocking, undervolting, etc.
2. Get flash happy and test which kernel matches your ROM the best with what you are looking for.
I know that may not be the exact answer you are looking for. But ROMs and kernels are all about personal preference and daily usage trends. each one has pros and cons that different people may or may not like. Check my ROM/kernel combination. It fits my usage habits, constantly using it at home and barely use it when out of the house, but it may not fit the way you use it. Experiment and have fun.
And here is a thread about kernels: http://forum.xda-developers.com/showthread.php?t=894880
Quite personally, I would suggest MIUI. If you're not into that kind of thing, I would suggest Deck's, who updated to stable yesterday!
Kernel, I would say Tiamat 4.0.8.
Look up Vipermod. Check my signature. Most phones can at least handle a -50 undervolt for the Tiamat mentioned above.
I would suggest the flashable GPS fix in my signature. Locks on quite accurately.
You may have a lot of cell standby drain. Check development section for a thread about Radio wakelock combination.
Best way to change the density would be to edit the build.prop but there are apps in the Market. Just search density changer
Sent from my PC36100 using xda premium
Flash Flash Flash
Then you will be able to find out what you like.
AOSP is always a winner for me.
Oh, and make sure you Nandroid.
I agree with both posts above, you have to try out roms for yourself since in every rom post you will see someone saying this is the best rom they have ever hadand battery life is super. Your question has been asked a million times before but like that millions of answers that were given it all boils down to personal choice.
I run AOSP with an sbc kernel but Lord knows you may find people here who would dispute the use of an sbc kernel. LCD Density apps are in the market or just use google for help. Sorry this is not a definitive answer but honestly just find a rom you like and give it a shot....
Thanks for all your answers time to get flash happy!
Sent from my PC36100 using xda premium
For me the best combo of performance and battery life has been SavagedZen and CM7. Completely transformed my perception of just well the evo should perform. Basically no compromises, Fast AND great battery life.
I'm using MikG 2.56 ROM with Aggressive Freedom kernel. Holding up pretty good.
For me the best combo is Decks Rom 1.3 + SavagedZen Kernel + Vipermod
I can get about 16 hours on MikG 2.56 (stock kernel) with moderate use. Damn near perfect ROM.
sai_iii said:
For me the best combo of performance and battery life has been SavagedZen and CM7. Completely transformed my perception of just well the evo should perform. Basically no compromises, Fast AND great battery life.
Click to expand...
Click to collapse
Which version of CM7 are you running? I'm on the 219 nightly and it kind of meh. I've tried savaged Zen with CM7.1 and it was good but my battery didn't seem to last as long during use so I decided to move on to other kernels. Are you running any supplementary battery apps?

Looking for a stable/fully featured ROM.

Hi everyone, my Incredible 2 just arrived and I'm about ready to root it and flash a ROM. I first wanted to try the CM7 stable build because they're "official" developers in my opinion, but I read some posts and there seems to be some issues with various small things. I looked at the nightlies and those still seem to have issues as well. Then I looked over here at the CM7Kangs, but something seems to tell me that CM isn't completely stable in itself. Whether it does or doesn't have Sense, etc. I'm just interested in a new ROM that is stable and fully functional (cameras work, GPS works, etc). The main reason for flashing a new ROM is because I don't want all the bloatware that comes with this thing, and even if it isn't cutting edge, I'm sure it can be faster than stock. Any suggestions guys?
EDIT: I hear Skyraider Zeus/MIUI are good. I found Skyraider Zeus 1.3 on the internet, but what versions of MIUI are stable? I hear this ROM has good reviews too
http://roms.miui.us/ 1.12.9 is stable an totally functional works good with areoevans .7 bfs kernel
---------- Post added at 08:49 PM ---------- Previous post was at 08:44 PM ----------
http://www.teambamf.net/f37/[rom][gb]-skyraider-zeus-1-3-inc2-[update-11-22-2011]-2725/
This is skyraiders link which is a top notch sense rom.
Skyraider's roms are top notch. All the current cm7 kangs work without flaws. Miui12.9 is awesome. Also look into condemned sense rom, any of nits work, alot of people are running mikrunny 3.5
Sent from my Incredible 2 using xda premium
Thanks! Just wondering, is Skyraider Zeus overclockable? I looked at the post and the only kernel it mentions is the "HTC OTA update". IIRC, you need a special kernel to OC, don't you?
Also, my question above is the same for the MIUI 1.12.9 ROM. Can it be OC'd? is it fully stable on the non-aeroevan kernel?
Yes you can us dres kernel found in development forum for skyraiders and miui I recommend using areovans kernel due to stock kernel can cause a few issues (low in call volume and for some data is not reliable)
Sent from my Incredible 2 using xda premium
another vote for SkyRaider Zeus. if you want a ROM you can set and forget, this is it. everything works, except for Verizon's wifi tether in the "quick launch", but that's it. it's just as reliable as stock or better, has tons of features and extras built in. a lot of thought, and time went into this, it is truly a complete Sense ROM.
never tried AOSP ROMs so i can't comment.
good luck in your search. at least try Zeus, you won't be disappointed.
I personally haven't tried miui so I wont comment on that. There are plenty of great roms out there. I am currently using the latest cm7 nightly as my DD (#134 I think?) with excellent results! I cant remember seeing any issues since i flashed it. I am going on nearly a month with zero issues. Before this rom I tried out New To Root's Incredible 2 HD RLS v1.1 which was also a flawless rom from my experience. I had no luck with the RC releases of cm7 but I know of others who love them.
I like to run sense from time to time but I always go back to aosp for the customization possibilities it offers.
In the end, none of us can tell you what the best rom for you is. I can say that in general if you want a rom that you can flash and forget about it you will probably want to go with a rom that has been around for a while, preferably one that is in RC or Final status.
My advice is to try a few so you can see whether you like miui, aosp, or sence. Once you figure that out then just try a few of that type to find one that suits you.
Sent from my Incredible 2 using XDA App
Well I've never even used a smartphone before other than when occasionally using my brother's iPhone 4, so the interface won't be a big deal. I'll adapt and enjoy whatever I end up using. I just want to use something that's stable (in the sense that it's fully featured and nothing randomly messes up) and fast. Skyraider Zeus and the various CM7 kangs seem to accomplish this. I'll have to think harder on which one i want to use. The CM7 kang i'm looked at is by Condemned Soul. I can't really post in that forum yet, so I'm using this thread as a way to get this type of information.
The CM7 kang that he made is already able to OC I believe because of the CM kernel...so that's a plus because I'd really just want to flash the phone and enjoy using it. I like tinkering with stuff, but I don't want to constantly worry about flashing/unflashing and causing instability. I need this phone to last until the next upgrade. The thing is, "Sense" seems really interesting. People say it looks nice and has lots of features, but I've never really experienced these features anyway, so maybe I should go with CM7.
I always hear people talking about how stable MIUI is, but that has not been my experience with MIUI at all. I have tried MIUI three or four times on a few different android devices each time following the install instructions exactly. Wiped factory reset, dalvik, permissions battery stats etc. all the default ROM install stuff.
Each time MIUI boots up fine and works well for about 3 hours and then randomly reboots and glitches forcing me come back to the stable CM7 version.
I really want to like MIUI, but my experiences seem to be very different than most people.
Interestingly enough, when I googled the word "issues" on Cyanogenmod's stable forum, they mentioned stuff about Skype having problems with audio that was fixed in the non-stable nightly #134. This is why I am wondering if CM7 is truly stable or not. I'm not sure how to track errors/issues, so I don't know what the nightlies have improved upon, and I definitely don't know what the kangs improve on/fix.
If you like tinkering with stuff I'd say you could go the CM or MIUI (AOSP) route. But this phone is not going to be as good as other phones that are running aosp. It was made to run sense.
Fully featured is also going to set you back, do you mean fully featured as in being able to use it as a world phone? GSM Capabilities?
If so you're going to have to run stock or close to stock.
Me personally, I like sense. MikRunny 1.01 here. Fast, stable and everything works. Except for GSM though.
cstone1991 had it right though, you have to run them to see which one you like best. Everyone is going to have their own opinions on which ROM runs best and again each phone is going to run ROMS differently as well.
For ROM's you're going to basically go through different bases like this.
AOSP ROM's like CM7, MIUI
Sense 2.1 ROM's like Andybones stock or skyraider zeus
Sense 3.0 ROM's like Virtuous
Sense 3.5 ROM's like MikRunny
Each base has different features, different feel. You'll also have the ability to theme them differently as well.
Try the ones that interest you the most, run them for a few days each and see which one fits you the best.
jrizk07 said:
If you like tinkering with stuff I'd say you could go the CM or MIUI (AOSP) route. But this phone is not going to be as good as other phones that are running aosp. It was made to run sense.
Click to expand...
Click to collapse
I like tinkering with stuff, but only to a point. I don't like to constantly have to "re-do" things that don't have to do with the tinkering process (IE: Flashing over and over). What makes the phone able to run "Sense" instead of AOSP? I'm not aware of the whole Sense vs AOSP bit. If I could get some solid info on why I should run Sense instead of AOSP, I'll run Skyraider Zeus most likely, etc.
Fully featured is also going to set you back, do you mean fully featured as in being able to use it as a world phone? GSM Capabilities?
If so you're going to have to run stock or close to stock.
Click to expand...
Click to collapse
What I mean is that I don't need "extra" features or anything like that. I just want the phone to work the way it's supposed to....such as GPS and the camera(s) working. I don't want to have to sacrifice something I use often in order to gain speed. World capabilities aren't a big deal to me for sure. I don't know what "tethering" is so that whole bit isn't too important either.
Me personally, I like sense. MikRunny 1.01 here. Fast, stable and everything works. Except for GSM though.
cstone1991 had it right though, you have to run them to see which one you like best. Everyone is going to have their own opinions on which ROM runs best and again each phone is going to run ROMS differently as well.
For ROM's you're going to basically go through different bases like this.
AOSP ROM's like CM7, MIUI
Sense 2.1 ROM's like Andybones stock or skyraider zeus
Sense 3.0 ROM's like Virtuous
Sense 3.5 ROM's like MikRunny
Each base has different features, different feel. You'll also have the ability to theme them differently as well.
Try the ones that interest you the most, run them for a few days each and see which one fits you the best.
Click to expand...
Click to collapse
Thanks for this huge list. What's the difference between Sense 3.5 vs 3.0 vs 2.1? Yes, the obvious answer is that one is newer than the other. I heard Sense 3.5 has issues with the camera being upside down, etc. So I'd probably stick with the Sense that came with this phone (Sense 2.1 probably)
ma70ent said:
I like tinkering with stuff, but only to a point. I don't like to constantly have to "re-do" things that don't have to do with the tinkering process (IE: Flashing over and over). What makes the phone able to run "Sense" instead of AOSP? I'm not aware of the whole Sense vs AOSP bit. If I could get some solid info on why I should run Sense instead of AOSP, I'll run Skyraider Zeus most likely, etc.
The drivers are mostly what's different. Because HTC uses sense originally, Sense is going to be what works the best. It's not that it can't run AOSP but that sense is going to run without problems because that's what it was made to run.
What I mean is that I don't need "extra" features or anything like that. I just want the phone to work the way it's supposed to....such as GPS and the camera(s) working. I don't want to have to sacrifice something I use often in order to gain speed. World capabilities aren't a big deal to me for sure. I don't know what "tethering" is so that whole bit isn't too important either.
All the features work in most ROM's like that. Some ROM's (Mostly AOSP) have issues where the camera is stretched (front facing cam on miui). You're not really losing anything on other ROM's it's just that they work differently.
Thanks for this huge list. What's the difference between Sense 3.5 vs 3.0 vs 2.1? Yes, the obvious answer is that one is newer than the other. I heard Sense 3.5 has issues with the camera being upside down, etc. So I'd probably stick with the Sense that came with this phone (Sense 2.1 probably)
Sense 2.1 has the older stuff, it's probably going to be the fastest out of the rest of them because it has the least amount of stuff in it. This is what comes on the phone stock and what Skyraider runs.
Sense 3.0 incorporated new features like a new lock screen, new weather app, weather animations, sounds, display features, dial pad, messaging. It's running more stuff so in order to run correctly you would have to use a rom that's optimized.
Sense 3.5 is the newest and also has different features but it's very close to 3.0. Just about everything is the same that you can see but there are differences behind the scenes. Also there are no camera issues unless someone puts out a ROM that was quickly thrown together.
Click to expand...
Click to collapse
I say you skip 3.0 altogether and run either 2.1 or 3.5. Anything is better than stock with all the bloat so try skyraider or andybonesstock.
If you wanna try 3.5 go with MikRunny 1.01 and in the display turn off the 3d widget features. See how that runs on your phone, It's flawless on mine, I get no lag but again different phones run differently.
Alright I've decided to go with Skyraider Zeus thanks to reading all of this. Thanks for all of the help. I don't plan on flashing a new kernel onto Skyraider Zeus, so whether the stock SZ kernel can OC or not doesn't matter to me.
ma70ent said:
Alright I've decided to go with Skyraider Zeus thanks to reading all of this. Thanks for all of the help. I don't plan on flashing a new kernel onto Skyraider Zeus, so whether the stock SZ kernel can OC or not doesn't matter to me.
Click to expand...
Click to collapse
I don't think you will need to over clock. I haven't needed to on this phone. I have tested it and all it did for me was reduce battery life and improve benchmark scores. I haven't been able to tell a difference in actual usage whether I run at 1ghz or 1.8ghz so I opt for better battery life. The only rom that I benefitted from overclocking on was one of the really early ICS builds.
Sent from my Incredible 2 using XDA App
To all you who responded and to the OP - thanks!
This thread has been very helpful, I just got my Inc 2 last week and looking forward to trying out some new ROMS.
I've read that the stock kernel changed with the OTA updates (I'm on 2.3.4)
Does that limit which of the ROMs I can run?
Are there better ROM managers than others when it comes to this phone and the ROMs available for it?
Thanks.
Sent from my ADR6350 using xda premium
Rickinsav said:
To all you who responded and to the OP - thanks!
This thread has been very helpful, I just got my Inc 2 last week and looking forward to trying out some new ROMS.
I've read that the stock kernel changed with the OTA updates (I'm on 2.3.4)
Does that limit which of the ROMs I can run?
Are there better ROM managers than others when it comes to this phone and the ROMs available for it?
Thanks.
Sent from my ADR6350 using xda premium
Click to expand...
Click to collapse
The fact that you're on 2.3.4 means you need to use a downgrade tool and go down to 2.3.3. Then you'll use software called "Revolutionary" to get root, etc. If you search for "nat3mills" on youtube, and look under his videos for incredible 2 stuff, he has step by step tutorials on how to do all of this. That's what I'm going to do. Hopefully XDA doesn't penalize me for referencing this youtube user. Good luck!
EDIT: Also I'd like to ask everyone, since you feel there is no point in overclocking, is there a way to undervolt with any of these ROMs? Specifically SkyRaider Zeus/CM7 (asking because these seem to be the two common choices for people, and I figured this thread could now be used as a good reference) My logic behind undervolting is that if you can overclock it drastically on stock voltage (which is what I assume SRZ and CM7 are on) then you can probably keep it at stock clocks and undervolt it for better battery life/temperatures.
EDIT #2: Ok I was just looking in CondemnedSoul's CM7Kang thread. Apparently there is an app called Incredicontrol that let's you mess with voltages. Just to make sure, CM7 in itself only has the ability to control clock speeds (under/overclock) and not voltages, right? This means that Incredicontrol is necessary to mess with voltages?
from my understanding; if you OC and UV you gain nothing, if you UC and UV you conserve battery, if you OC and OV you make your device faster but perhaps introduce instability.
i've been reading tons of threads, clock speeds and volting included, and i have made the decision to not O/UC nor O/UV because my phone works great as it is and i do not care about benchmarks and my battery life is acceptable as it is.
if you really want to know more, set aside some time (hours) to search and read thread after thread on these topics and make your own educated decision based on the debates other members have participated in.
Number R09 said:
from my understanding; if you OC and UV you gain nothing, if you UC and UV you conserve battery, if you OC and OV you make your device faster but perhaps introduce instability.
i've been reading tons of threads, clock speeds and volting included, and i have made the decision to not O/UC nor O/UV because my phone works great as it is and i do not care about benchmarks and my battery life is acceptable as it is.
if you really want to know more, set aside some time (hours) to search and read thread after thread on these topics and make your own educated decision based on the debates other members have participated in.
Click to expand...
Click to collapse
Uhhh, you're looking at things the wrong way completely. Having less voltage whether something is overclocked or underclocked is ALWAYS better. If you increase the clock speed and have the voltage less than stock, it's a complete WIN WIN situation unless it introduces instability, but this is something you test for. Some people Overvolt to Overclock even further, but increasing voltage is not ALWAYS necessary. Keeping speeds at stock, but UNDERVOLTING helps battery life. Finally, overclocking but keeping stock voltage is the best combination for actual speed. Increasing voltage reduces battery life much more than simply increasing clockspeed.
This is how things work for desktops, and I'm sure it applies to everything else, including phones.
ma70ent said:
Uhhh, you're looking at things the wrong way completely. Having less voltage whether something is overclocked or underclocked is ALWAYS better. If you increase the clock speed and have the voltage less than stock, it's a complete WIN WIN situation unless it introduces instability, but this is something you test for. Some people Overvolt to Overclock even further, but increasing voltage is not ALWAYS necessary. Keeping speeds at stock, but UNDERVOLTING helps battery life. Finally, overclocking but keeping stock voltage is the best combination for actual speed. Increasing voltage reduces battery life much more than simply increasing clockspeed.
This is how things work for desktops, and I'm sure it applies to everything else, including phones.
Click to expand...
Click to collapse
Not necessarily...desktops and laptops and phones (hardware in particular) is built to run within certain voltage limits. Undervolting CAN help but not in all situations, and especially when running at max-min frequency can cause major instability in a speed-step cycle.
It is usually safe to undervolt a little bit with most hardware - but radios in general can be affected by voltage. Test all hardware with stress testing to ensure it is safe FOR YOUR PARTICULAR PHONE.
Background : MS in Computer Science (Heavy Unix Background)
To keep the thread on track - this phone was meant to run with Sense 2.1 - if you sync multiple email accounts or run many apps (buggy or not) you should probably stick with Sense 2.1. If you arent a demanding mobile phone user try anything else. I wish the AOSP builds were more compatible with HTC - and if AOSP isnt integrated into any HTC phones in the future I may switch to another manufacturer.

Kernels and your preferences

Alright, pointless gathering of information time! How many of you strictly flash a different kernel after a ROM flash? For example, I'm using liq*id 1.5 which comes with Franco kernel bundled with it. Now, I'm sure a large percentage here may agree, the guys have built a nice stable ROM and know what they are doing, likewise Franco is a dependable dev with a solid kernel.
On paper it sounds like a match made in heaven as they both have plenty of experience and i'm sure the liq*id devs chose it for a reason. However, I always go back to Trinity after about 20 mins. Am I a sucker for placebo effects? Does anyone else religiously go back to a preferred kernel despite the knowledge that most bundled kernels SHOULD/POSSIBLY give the best user experience?
TL;DR do you use a kernel most the time because you BELIEVE it will give you the best experience, or do you give bundled kernels a good run first?
Sent from my Galaxy Nexus using XDA
i dont know.. in my experience custom kernels have usually been better than bundled kernels, with cm being an exemption since the cm kernel is very important to cyanogen. on most the other roms, most of the developers really focus most their attention to the rom. anyways, i will usually run/try all the kernels(need to know what is out there and how it compares to trinity), but always go back to trinity since that where my heart lays, and home is where the heart is
Through some sort of sorcery and probably placebo, I've always noticed best results when I use a kernel that has its own ramdisk.
I'm not much for bundled kernels. I know what kernels work for me and how they work by trying them all out.
Currently, GLaDOS kernel is the one that acts best for me.
Franco Kernel... it's what I'm used to and I haven't had any problems with it so why change? plus.. I bought his app, so I'm dedicated to it.
And no I don't use bundled kernels. Just because the kernel comes with the ROM doesn't mean its optimal for that particular ROM. But it may come with ROM settings that are for that kernel (such as AOKP and "GNParts")
LeanKernal 5.7
zephiK said:
Franco Kernel... it's what I'm used to and I haven't had any problems with it so why change? plus.. I bought his app, so I'm dedicated to it.
And no I don't use bundled kernels. Just because the kernel comes with the ROM doesn't mean its optimal for that particular ROM. But it may come with ROM settings that are for that kernel (such as AOKP and "GNParts")
Click to expand...
Click to collapse
If you want to use AOKP 4.2.1 which is MR1 build 1 I suggest just upgrading the kernel they chose to go with...It wtill has some battery issues but if helped at least 30%
I use CM 10.1 with the CM 10.1 kernel. Best combo for me and my usage pattern
I don't use bundled kernels either!Last 3 months using AK Purity Kernel and it's really solid and does the job perfect!
I've been running CM 10.1 with the Air Kernel. Its been working great for me so far.

Categories

Resources