Kernels for MIUI - Desire Q&A, Help & Troubleshooting

List of Kernels and whether they work or not.
vorkKernel- Unfortunately this kernel does not work and causes many things to go wrong. Such as everything closing
BCblend [Over at the EVO Kernels for MIUI]- Does not work, would not even start. That's because it is for the EVO. But still worth a try
PM me or post here if you know any other kernels for MIUI or not for MIUI but you have tried it and it works.

Related

[Q] Kernels for HTC EVO

I'm new to kernel flashing. I have been playing around with snap and kings kernel. I don't have a problem flashing snap, but once I have it installed it works fine for awhile, but then it reboots itself or goes into a state where it won't turn on and I have to pull the battery. I tried 7.6 both bfs and cfs and the same thing happens. I also tried 7.5 but once I flashed it nothing showed up in the apps to install.
For kings kernel I flashed it and it booted up fine but it seemed to freeze up and I couldn't unlock my phone after the boot.
Am I doing something wrong when I am flashing these? I am running the nightlies of cyanogen. Also, What are some other kernels that work well with cm?
Thanks!!!
Kernals seem to be a taste for the phone itself and not the rom...
My Evo doesnt seem to like any other kernals than stock I have tried many rom/kernal combos and the only way i get no issues and best battery is to run stock kernal
I ran fresh with netarchy and kings like some others-that had great battery and mine just drained fast so I am done with the kernal swapping for now and jut keep playing with roms.... Trying out Virusrom right now not bad so far
Try wiping the cache and dalvik cache before flashing the new kernels. That might help.
Another thing that might help is posting this in the right section. More people with the knowledge and good insight that you need will be more apt to answer you in the Q&A section.
I've tried clearing everything including data but it still would self reboot
the snap kernels do not work with the recent versions (nightlies) of CM.
The framework has been redone, and you will freeze.
You have to use the stock kernel.
Ziggy just made an AOSP kernel, but its buggy.
Toast has a .35 kernel that works good on the new frame work.
I just was able to use a different kernel of kings. It really doesn't enhance quadrant scores, but im want to see what it does to the battery. Where can I download toast.
Also, I noticed that now my unlock screen is different from my wall paper. Is that a kernel issue?
Check to make sure SetCPU is disabled (or any other overclocking utility), and wipe your cache/dalvik. If all else fails, go with the Snap 7.6 failsafe method.
Kings AOSP #1 has worked best for me using cm nightlies. I have easily doubled my battery life. Has anybody else had success with any other kernels? Is toast an AOSP kernel?
as TheJoker and drmacinyasha commented...
snap and king use the .32 kernel. snap http://forum.xda-developers.com/showthread.php?t=733099
cm6 nightly is currently using .34 kernel
Toast has a .35 test1 kernel available for CM6 (http://forum.xda-developers.com/showthread.php?t=735596)
ziggy has a kernel as well. (http://forum.xda-developers.com/showthread.php?t=819402)
zendroid has a kernel - http://forum.xda-developers.com/showthread.php?t=831021
turn off setcpu until after you reboot with the new kernel. don't forget to read the kernel threads OP for possible hints on setcpu configs (ie: snap7.6 works well with conservative governor)
yes they are all AOSP.
i would not advise a newbie to play with the snap or king kernels until the .35 revisions have been released. this is due to changes in the Framework.apk file. you are likely to find that a current CM6nightly w/ the snap7.6 kernel = no bluetooth. new kernels should be hitting shelves very soon. personally, i'm looking forward to loading up the snap kernel once its done cooking, i really liked that kernel.
most are just fine with the stock kernel
many have commented positively on the toast test1 kernel (aside from a hang issue at startup)
ziggy & zen have a bit of work to do on their kernels it seems.
once .35 is 'done' you'll find a bunch of movement on the the kernel threads.
DraginMagik said:
as TheJoker and drmacinyasha commented...
snap and king use the .32 kernel. snap http://forum.xda-developers.com/showthread.php?t=733099
cm6 nightly is currently using .34 kernel
Toast has a .35 test1 kernel available for CM6 (http://forum.xda-developers.com/showthread.php?t=735596)
ziggy has a kernel as well. (http://forum.xda-developers.com/showthread.php?t=819402)
zendroid has a kernel - http://forum.xda-developers.com/showthread.php?t=831021
turn off setcpu until after you reboot with the new kernel. don't forget to read the kernel threads OP for possible hints on setcpu configs (ie: snap7.6 works well with conservative governor)
yes they are all AOSP.
i would not advise a newbie to play with the snap or king kernels until the .35 revisions have been released. this is due to changes in the Framework.apk file. you are likely to find that a current CM6nightly w/ the snap7.6 kernel = no bluetooth. new kernels should be hitting shelves very soon. personally, i'm looking forward to loading up the snap kernel once its done cooking, i really liked that kernel.
most are just fine with the stock kernel
many have commented positively on the toast test1 kernel (aside from a hang issue at startup)
ziggy & zen have a bit of work to do on their kernels it seems.
once .35 is 'done' you'll find a bunch of movement on the the kernel threads.
Click to expand...
Click to collapse
Thanks! this really helped. This may be a dumb question, but where do you find out what kernel runs with the ROMS. eg .35
I really want to find a good combination that gives me good battery life and performance. so will snap 7.6 work with cm 6.1 rc 1 rom?
I saw for CM6.1 the stock kernel is the best. I have gotten the best performance, battery life, and bug free with the stock kernel.
Snap 7.6 would get stuck on the splash screen and required several battery pulls.
Toast .35 works good, but after about an hour or two for some reason it brings my fps cap down to 37, so all my scrolling and games run like ****.
Wait for Snap 9 or the official toast .35 kernel. Stock is just fine.
I was bored last night and tried cm 6.1 with snap 7.6 just for fun, but it seems to be working fine. The boot was quick too, it was on the cyanogen boot image for about 3 seconds before it started up. Quadrant scores are in the mid 2000s. No problems with anything else so far.
Is there a snap website or channel log? I can only fined directories.

0004 Harware what roms are best

I read somewhere that the 0004 hardware phones have a different camera in them that does not work with some roms. I am looking into rooting soon, possibly today if I can get it to work, if not I will wait for unrevoked's update, I am just wondering what roms work with the camera or at least have a fix.
I really don't need or use sense, but that was when I was on the hero and sense bogged down the phone greatly. I just want a fast performing rom that has themes available and tweaks available.
Thanks for your help!!!
Myn RLS4 works flawlessly
Swyped from Eva running Myn's RLS4 on the Now Network!
It also has a lot of themes añd tweaks in the themes/apps section
Swyped from Eva running Myn's RLS4 on the Now Network!
stricklerjosh said:
I read somewhere that the 0004 hardware phones have a different camera in them that does not work with some roms. I am looking into rooting soon, possibly today if I can get it to work, if not I will wait for unrevoked's update, I am just wondering what roms work with the camera or at least have a fix.
I really don't need or use sense, but that was when I was on the hero and sense bogged down the phone greatly. I just want a fast performing rom that has themes available and tweaks available.
Thanks for your help!!!
Click to expand...
Click to collapse
It is not the ROM that causes the problem. You can use any Rom you want to but if you want the camera to work you can not use custom kernals. The only ones I know for sure that support the new camera are HYC #15 and #17
15 is actually the newer kernal released with the 3.70 OTA
This applies to later model 003 phones like mine also. It's a real bummer. I'd love to use one of the battery saving kernels, but my camera won't work with any of them. I wish someone would put the mods in the newest #15 kernel...
I say try different kernels and see what works for your Evo. Make sure u do a nand backup first. I personally have an 004 Evo and i have tried various roms and kernels and i havent had an issue yet (besides an occasional reboots) but my camera/camcorder works great....i have used ava v10, myn's 2.2 rsl4 and currently culkins....i have used ziggys, and net's various kernels with no issue either
The ROM's not the problem. I can run any ROM, as long as I replace the kernel with #15 or #17. So far none of the newer modified kernels will work with my camera.
Sent from my PC36100 using XDA App

[Q]Savaged-Zen Issue, or recommend a kernel for stock rom

I tried the latest Savaged-Zen froyo kernel and the speed is excellent but I get random horizontal lines on the screen. Especially on anything that loads or refreshes like the notification bar or facebook loading icon.
Never really flashed a custom ROM or anything, the only thing I did was install Rom Manager and added a recovery. I just want to be able to boost up the speed safely and I read kernels are the best way.
That's called screen tearing, so you should change. I recommend the savaged-zen froyo kernel, or since you're on sense, the net-archy kernels have good reviews.
And you flash a kernel just like a rom > wipe cache and dalvik, then flash the kernel.
I used to have screen tearing all the time but on tiamat I got none.
Sent from my PC36100 using XDA App
teh roxxorz said:
That's called screen tearing, so you should change. I recommend the savaged-zen froyo kernel, or since you're on sense, the net-archy kernels have good reviews.
And you flash a kernel just like a rom > wipe cache and dalvik, then flash the kernel.
Click to expand...
Click to collapse
I already tried the Savaged-zen and i tried a few of their older froyo builds. I just realized that since I never flashed any custom ROMS my phone is still sense based and these kernals are AOSP based, is that the reason?
dickpills said:
I already tried the Savaged-zen and i tried a few of their older froyo builds. I just realized that since I never flashed any custom ROMS my phone is still sense based and these kernals are AOSP based, is that the reason?
Click to expand...
Click to collapse
Absolutely, I was just about to inform you of that. Those kernels are only for AOSP roms. If you stay on sense, you need to try a Sense kernel. I have great luck with Netarchy's or Ziggy's kernels. Good luck
www.ziggy471.com
http://forum.xda-developers.com/showthread.php?t=719763
Edit, and to OP, your SN is hilarious. LOL. 'dickpills'
k2buckley said:
Absolutely, I was just about to inform you of that. Those kernels are only for AOSP roms. If you stay on sense, you need to try a Sense kernel. I have great luck with Netarchy's or Ziggy's kernels. Good luck
www.ziggy471.com
http://forum.xda-developers.com/showthread.php?t=719763
Edit, and to OP, your SN is hilarious. LOL. 'dickpills'
Click to expand...
Click to collapse
Cool, that makes sense. Netarchy's seems to pop up a lot in my research so I'll give it a go. And thanks for the comment, haha.
*Update: so far so good, I'm seeing much better frame rate but not as good as I was experiencing with Savaged-Zen. I never really used a benchmark to get actual numbers I'm mostly going by eye. I'm actually considering trying out various ROM's just to be able to use Savaged-Zen. What I love about Android is that I can easily customize the scrub way through apps, trying out custom Roms, themes or if I'm feeling brave I can go in and edit anything myself by replacing files. The community is great so new things are always coming out and I'm never bored with my phone.

[Q] help do all kernells work with all roms??

Do all kernells work with all roms???
an does this kernel http://forum.xda-developers.com/showthread.php?t=682419
work with the rom:RCMixHD
No,ASOP kernels are for ASOP roms like Oxygen,CM7,DeFrost (= non-Sense UI ROMs) and Sense kernels are for ROMs with Sense UI. RCMix is Sense ROM. No shure about that kernel,but it seems like krenel for non-Sense ROMs.
asop kernels work for roms like cm7, redux, ginervillian etc. senmse kernels work for sense roms like leedroid 2.2. rcsmixhd is a 2.3.3 gingersense rom which needs a gingersense kernel. so far, there is only the leaked gingersense kernel. thats it thats all. youll have 2 wait until the official kernel source code is released b4 they can creaate custom overclocked undervolted kernels
Sorry to interfear in Ts's topic, but i thought my question is somewhat realated.
Are the kernals included in the roms. or do you have to flash a apropriat kernal yourselve?
Same question goes for radio and i flashed a wifi N thingy my previous rom advised. do i have to undo those things before installing a new rom?
lnodder: custom ROMs include kernels already, but you always have the option of flashing a differenet kernel. Be careful to distinguish what kind of kernel you're flashing vis-a-vis what ROM you have (Sense, non-Sense, etc)
Radios by and large don't need to be flashed/reflashed if they're working fine. Flashing radios improperly is one of the biggest causes of bricked cellphones.
Okay thnx for the info.
But in case of an update from froyo to gingerbread. you do need to update the radio?
At least here the dev. states "Requirement:
Latest Radio 32.56.00.32U_5.17.05.08"
Borat38 said:
lnodder: custom ROMs include kernels already, but you always have the option of flashing a differenet kernel. Be careful to distinguish what kind of kernel you're flashing vis-a-vis what ROM you have (Sense, non-Sense, etc)
Radios by and large don't need to be flashed/reflashed if they're working fine. Flashing radios improperly is one of the biggest causes of bricked cellphones.
Click to expand...
Click to collapse

T989 Menu Buttons not disabled in call

I searched up and down for this, but for some reason when ever I use many of the roms here my menu buttons are still active when I am in call causing me to push the search button and cause google voice search to pop up. This happens way to often.
It doesnt happen when I use the CM Windows based installer to install the rom, but the battery and performance on that is not too great.
Rushing's Roms dont seem to have this but I dont really like touchwiz, and when I try any roms with the uber kernel they all have this bug and I tried to search in those threads for this but the search engine could not find anything.
I think its UBER kernel related, but also the CM Rom with Diablo kernel does the same thing, and I looked up and down in trickster mod control for button behavior but I just cant find it.
Anyone could point me in the right direction at least?
oh come on, anyone?
TheProfiteer said:
I searched up and down for this, but for some reason when ever I use many of the roms here my menu buttons are still active when I am in call causing me to push the search button and cause google voice search to pop up. This happens way to often.
It doesnt happen when I use the CM Windows based installer to install the rom, but the battery and performance on that is not too great.
Rushing's Roms dont seem to have this but I dont really like touchwiz, and when I try any roms with the uber kernel they all have this bug and I tried to search in those threads for this but the search engine could not find anything.
I think its UBER kernel related, but also the CM Rom with Diablo kernel does the same thing, and I looked up and down in trickster mod control for button behavior but I just cant find it.
Anyone could point me in the right direction at least?
Click to expand...
Click to collapse
If it bothers you that much, don't use Uber. Simple.
meekrawb said:
If it bothers you that much, don't use Uber. Simple.
Click to expand...
Click to collapse
Its not that I dont want to use UBER or any other Kernel, if its something that IS as a result of the Kernel and everything else is works well I can deal.
but maybe its an issue thats been fixed and I cant seem to locate the thread because I maybe simply do not know how to word it correctly.
TheProfiteer said:
Its not that I dont want to use UBER or any other Kernel, if its something that IS as a result of the Kernel and everything else is works well I can deal.
but maybe its an issue thats been fixed and I cant seem to locate the thread because I maybe simply do not know how to word it correctly.
Click to expand...
Click to collapse
Ahh. So do the ROMs still have the problem if you don't flash a different kernel?
meekrawb said:
Ahh. So do the ROMs still have the problem if you don't flash a different kernel?
Click to expand...
Click to collapse
been trying it out with various different combinations.
Vanilla AOKP and CM seem ok.
ThDudes's CM 10.2 + Diablo Kernel (Kernel already fused into the rom) button issue still persists, UBER Kernel flashed with TWRP on both AOKP on CM button issue persists.
but then, if I reflash vanilla AOKP or CM through TWRP the issue will still persist.
Its either the Kernel or TWRP, as you "shouldnt" flash UBER through CWP i cant quite isolate the problem.
been going back and forth quite a bit here, I would love to stick with vanilla AOKP or CM but idle battery drain is extremely excessive, and they both crash when trying to change the governor.
I am just trying to find a good stable ground to operate on as I save up for an S4 and to have a well known return point after I go on a flashing spree.
I have only been dabbling with 4.3 based roms, so I havent had the chance to try any previous version roms yet, other than Rushing's Shadow rom which was great with battery, super fast, but sadly had touchwiz which i tried to get used to but it was missing alot of the things I needed.
TheProfiteer said:
I am just trying to find a good stable ground to operate on as I save up for an S4 and to have a well known return point after I go on a flashing spree.
I have only been dabbling with 4.3 based roms, so I havent had the chance to try any previous version roms yet, other than Rushing's Shadow rom which was great with battery, super fast, but sadly had touchwiz which i tried to get used to but it was missing alot of the things I needed.
Click to expand...
Click to collapse
I have been using Slimbean 4.3.1 with @Cl3Kener stable kernel for a long while. It has been rock solid for me.
meekrawb said:
I have been using Slimbean 4.3.1 with @Cl3Kener stable kernel for a long while. It has been rock solid for me.
Click to expand...
Click to collapse
I'll have to give that a try. Been out of the loop on slimbean, used it for a little on my S1 Vibrant a while ago.
Just flashed LiquidSmooth, and apart from being only 4.1.2 AOSP, seems to be running pretty well.

Categories

Resources