Error entering recovery. - Droid Incredible Q&A, Help & Troubleshooting

When I select "recovery" in Hboot my phone shows me the phone image with the triangle error icon. Anyone know what can cause that and/or a fix for it? Hard to flash things without being able to enter recovery.
Dinc (Froyo, Sense, Unrevoked F, S-Off)

Codegk said:
When I select "recovery" in Hboot my phone shows me the phone image with the triangle error icon. Anyone know what can cause that and/or a fix for it? Hard to flash things without being able to enter recovery.
Dinc (Froyo, Sense, Unrevoked F, S-Off)
Click to expand...
Click to collapse
That's the stock one. Reflash clockwork via ROM Manager.
Sent from my ADR6300 using XDA App

Related

[SOLVED] Can't access Custor Recovery Image from HBOOT

I'm having a issue where I can't access ClockworkMod Recovery (or any other recovery, to be fair) when booting in HBOOT and selecting Recovery.
If I boot throught ROM Manager, I can go into CM like everybody else. If I try to go manually, I end up in the stock Recovery with exclamation mark.
The thing is that I made a tutorial to install CM in Desire and shared with some friends and all of them, following the same steps I made, can go into CM just by selecting Recovery in HBOOT.
Installed thru Unrevoked succefully but got the same issue.
I've tried to flash CM again thru ROM Manager several times with no luck. I can only go to CM if I use the option in ROM Manager.
I've searched a lot but I don't think I'm finding the correct key words.
Anyone has any ideas?
This is important because if I have problems with flashing some ROM and can't get into Android and ROM Manager, I won't be able to do anything without a PC.
I'm using Official SenseFroyo 1.0c from Open Desire.
hugocbp said:
I'm having a issue where I can't access ClockworkMod Recovery (or any other recovery, to be fair) when booting in HBOOT and selecting Recovery.
If I boot throught ROM Manager, I can go into CM like everybody else. If I try to go manually, I end up in the stock Recovery with exclamation mark.
The thing is that I made a tutorial to install CM in Desire and shared with some friends and all of them, following the same steps I made, can go into CM just by selecting Recovery in HBOOT.
Installed thru Unrevoked succefully but got the same issue.
I've tried to flash CM again thru ROM Manager several times with no luck. I can only go to CM if I use the option in ROM Manager.
I've searched a lot but I don't think I'm finding the correct key words.
Anyone has any ideas?
This is important because if I have problems with flashing some ROM and can't get into Android and ROM Manager, I won't be able to do anything without a PC.
I'm using Official SenseFroyo 1.0c from Open Desire.
Click to expand...
Click to collapse
You will have to flash a RUU Rom to restore recovery
Sent from my HTC Desire using XDA App
You have forgotten one simple step.
When you choose recovery and get the red exclamation mark with a triangle, as described, you then need to press the volume down key and power at the same time. You will then have a blue text menu, choose apply update.zip to load CW recovery ( assuming you have CW recovery stored on your SD card root folder, renamed to update.zip )
atomfix said:
You will have to flash a RUU Rom to restore recovery
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Do you mean flash a RUU Rom and then flash a Custom Recovery back thru ROM Manager?
If so, is there any explanation why out of about 5 Desires rooted and with custom recovery flashed the same way, only 1 can't go into CM Recovery strait from HBOOT?
I'll try that as a last resource... If I can avoid flashing a 2.1 ROM and then a Froyo ROM back this would be nice.
Anyway, thanks for the quick help.
gekkonz said:
You have forgotten one simple step.
When you choose recovery and get the red exclamation mark with a triangle, as described, you then need to press the volume down key and power at the same time. You will then have a blue text menu, choose apply update.zip to load CW recovery ( assuming you have CW recovery stored on your SD card root folder, renamed to update.zip )
Click to expand...
Click to collapse
I already have CW installed. I just can't access it directly. Nothing happened when I pressed voldown+power while the red triangle was showing.
Sent from my HTC Desire using XDA App
hugocbp said:
I already have CW installed. I just can't access it directly. Nothing happened when I pressed voldown+power while the red triangle was showing.
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Do vol+up and power at the same time
Sent from my HTC Desire using XDA App
atomfix said:
Do vol+up and power at the same time
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Sorry guys, you were right.
It turns out that dispite having using Unrevoked until it said "done", I though it would install CW directly...
Anyway, I just had to push VolUp + Power properly and managed to go into stock recovery and then flash CW.
Thanks atomfix and gekkonz for your help. I would never figure this out myself...
And that ROM Manager thing pointing out I had CW installed is really misleading, by the way...
Doh, yes vol up not vol down

[Q] Help Brick,

hi, my Incredible bricked after a hard reset. it stucks in the frist screen (the white one, that says Htc incredible), I can acces to the Hboot, but I cant acces to recovery menu neither hard reset or clear storage options because this options restar the device an it get stuck in the same screen. it have s-on. theres something to do? or is a paperweight now?
yomero1 said:
hi, my Incredible bricked after a hard reset. it stucks in the frist screen (the white one, that says Htc incredible), I can acces to the Hboot, but I cant acces to recovery menu neither hard reset or clear storage options because this options restar the device an it get stuck in the same screen. it have s-on. theres something to do? or is a paperweight now?
Click to expand...
Click to collapse
If you can get to the boot menu then its not bricked
Try reflashing the recovery from there
Sent from my ADR6300 using XDA App
superchilpil said:
If you can get to the boot menu then its not bricked
Try reflashing the recovery from there
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
thanks, can u tell me some hints to search it?
yomero1 said:
thanks, can u tell me some hints to search it?
Click to expand...
Click to collapse
Try using unrevoked, and make sure your in hboot when u plug it in
If that doesn't work I believe your other option is adb but I know nothing of using it
Sent from my ADR6300 using XDA App
Assuming you have a way to get the file onto your sdcard (like plugging it directly into your computer), you can flash the recover image from hboot. I am not sure where you can get the plane jane clockwork recovery, but you can get the slightly modified clockwork recovery with easy scrolling enabled from the thread linked below. That should at least get you up and running again and then you can flash back the regular CW Recovery from Rom Manager if you don't like the easy scroll version.
Instructions for flashing from hboot are also in the thread.
http://forum.xda-developers.com/showthread.php?p=8245140#post8245140
You guys are missing that hes S-on, which means he cant flash from hboot.
Fretless said:
You guys are missing that hes S-on, which means he cant flash from hboot.
Click to expand...
Click to collapse
I saw it but was guessing he meant s-off because of the way he said it. Hopefully unrevoked worked for him then as I don't think you have to have s-off for it to work.
Other option would be to flash a stock RUU from hboot. That should work even if he is s-on.
sdorn77 said:
I saw it but was guessing he meant s-off because of the way he said it. Hopefully unrevoked worked for him then as I don't think you have to have s-off for it to work.
Other option would be to flash a stock RUU from hboot. That should work even if he is s-on.
Click to expand...
Click to collapse
Either way. He's got hboot, which means its not a brick
to the OP
If nothing else works,
I agree with sdorn. RUU is the way.
Thats what will fix your issues.
If you cant get to recovery and you have S-on, meaning that you cannot flash a custom recovery, your only option is to RUU. There is a link in android development. You will need a windows computer. Try this and report back. If it doesnt work and gives you a USB error, simply: 1. Exit the ruu program (KEEP YOUR PHONE PLUGGED IN), and 2. Run it again.
Boom, no more brick
but, hours worth of retweaking.
You could also try to run a update.zip of the OTA. Here is the url to download it.
droid-life.com/2010/08/31/manual-update-droid-incredible-to-android-2-2/
You can get the clockwork recovery from unrevoked.com on the forever part.
Sent from my DInc using XDA
Redemption Rom 2.03
Hydra OC 1.113
Unrevoked splash
Cyborg boot
I try with unrevoked3 but it cant find the phone.. the ruu that you said before is this ?? techpetals.com/how-to-root-install-froyo-for-droid-incredible-leaked-version-froyo-manual-install-1937
somekid13 said:
You could also try to run a update.zip of the OTA. Here is the url to download it.
droid-life.com/2010/08/31/manual-update-droid-incredible-to-android-2-2/
You can get the clockwork recovery from unrevoked.com on the forever part.
Sent from my DInc using XDA
Redemption Rom 2.03
Hydra OC 1.113
Unrevoked splash
Cyborg boot
Click to expand...
Click to collapse
thanks, but the incredible is s-on and I cant access to the recovery for the update . Im trying to figure how to do the RUU that fretless said.
This update there is no need to have s-off, you can do out with s-on. It is the official ota update from verizon. Just download it, put out on the your of your sd card, then power phone up while holding the power button and volume down button. It should recognoize the file and ask you if you want to install. This is easier than the RUU and just as effective.
Sent from my DInc using XDA
Redemption Rom 2.03
Hydra OC 1.115
Unrevoked splash
Cyborg boot
yomero1 said:
thanks, but the incredible is s-on and I cant access to the recovery for the update . Im trying to figure how to do the RUU that fretless said.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=765596&highlight=Ruu link to thread
Sorry if I'm not supposed to post links.
Install boot drivers. Refer to unrevoked help for this.
Run ruu. If it fails cancel program ten run it again.it's easy.
somekid13 said:
This update there is no need to have s-off, you can do out with s-on. It is the official ota update from verizon. Just download it, put out on the your of your sd card, then power phone up while holding the power button and volume down button. It should recognoize the file and ask you if you want to install. This is easier than the RUU and just as effective.
Sent from my DInc using XDA
Redemption Rom 2.03
Hydra OC 1.115
Unrevoked splash
Cyborg boot
Click to expand...
Click to collapse
He can't get into recovery, so he can't apply the update. He's got to ruu.
1. Download the update.zip file from here. (DIRECT FROM GOOGLE.)
2. Drop the file on the root of your SD card. (Meaning, don’t put it in any folder.)
*MAKE SURE IT’S NAMED UPDATE.ZIP!
3. Turn your phone off.
4. Press and hold the Volume Down and Power at the same time to boot into HBOOT.
5. When the white HBOOT screen appears, use the volume button to move down to “RECOVERY.”
6. Press the Power button to select “RECOVERY.”
7. When the triangle and exclamation appears, hold the Volume Up and Power button at the same time.
8. Using the volume button, scroll down to “apply sdcard:update.zip” and select it.
9. Your phone will now update!
10. It could take some time, so be patient. When it reboots, you are on official 2.2. Yay!
Click to expand...
Click to collapse
what I mean is that the step 7 never hapen, it freezes in the HTC Incredible bootscreen forever( until I pull off the battery).
there is another way to install this update without the recovery menu?
yomero1 said:
what I mean is that the step 7 never hapen, it freezes in the HTC Incredible bootscreen forever( until I pull off the battery).
there is another way to install this update without the recovery menu?
Click to expand...
Click to collapse
Just use the ruu. Your recovery is probably messed up.
yomero1 said:
what I mean is that the step 7 never hapen, it freezes in the HTC Incredible bootscreen forever( until I pull off the battery).
there is another way to install this update without the recovery menu?
Click to expand...
Click to collapse
Perhaps wait for awhile at the htc screen
My first root and flash took 20 min.
Sent from my ADR6300 using XDA App
Fretless said:
http://forum.xda-developers.com/showthread.php?t=765596&highlight=Ruu link to thread
Sorry if I'm not supposed to post links.
Install boot drivers. Refer to unrevoked help for this.
Run ruu. If it fails cancel program ten run it again.it's easy.
He can't get into recovery, so he can't apply the update. He's got to ruu.
Click to expand...
Click to collapse
thanks, downloading, I did instal the drivers from unrevoked,
is frustrating, I did run RUU conect to USB with the drivres from unrevoked and it get error 170 cannt find it. I did something wrong?
yomero1 said:
is frustrating, I did run RUU conect to USB with the drivres from unrevoked and it get error 170 cannt find it. I did something wrong?
Click to expand...
Click to collapse
Unrevoked drivers don't play nice with the ruu.
Follow above posters to RUU to 2.2 stock.
UnRevoked 3.2 will give you root and CWM.

[Q] Clockworkmod, what have I done wrong?

I am trying to get Clockworkmod working on my DZ.
I have got perm root by using Visionary and I have installed ROM Manager from the market place which appears to install the ClockworkMod image.
However, when I select boot into recovery, the phone restarts and I get a red triangle with an exclamation mark in it.
I have tried repeating the above steps a couple of time but it makes no difference.
What have I done wrong?
R.
Just go into ROM Manager again (don't reinstall ROM Manager another time) and just flash the Recovery again. It seems to need two goes to make it work for some reason.
Tried that several times.
When I issue the Flash ClockworkMod recovery command it completes much quicker than the first time. Is this expected or do you think it's not actually completing the flash the second time? No error is reported.
R.
dicko99 said:
Tried that several times.
When I issue the Flash ClockworkMod recovery command it completes much quicker than the first time. Is this expected or do you think it's not actually completing the flash the second time? No error is reported.
Click to expand...
Click to collapse
For me, when I did it the second time, it was a lot quicker, yes. But it worked - i.e. when I selected the option to reboot into recovery (from ROM Manager), that booted the system straight into Clockwork.
Maybe try going into Menu->Settings from ROM Manager, then selecting the option to erase recovery before flashing ?
Just reading here, it looks like I need root AND S-OFF. I've only done the root stuff so far...
Stay tuned.
R
dicko99 said:
Just reading here, it looks like I need root AND S-OFF. I've only done the root stuff so far...
Click to expand...
Click to collapse
LOL, yes, that'll be the problem, I should have thought of that
Root is enough! Install it again. The first time you've installed it you had temp root probably. It will be ok after a secong install.
Press Vol up + power on the red triangle screen!!!!!
Sent from my HTC Vision using XDA App
tvachev said:
Root is enough! Install it again. The first time you've installed it you had temp root probably. It will be ok after a secong install.
Click to expand...
Click to collapse
I don't think you can flash any custom images, including recovery, unless you have S-OFF ? The write protection on the NAND will be on, which will stop you.
I do remember reading something about being able to flash rooms WITH S-on using a newer Visionary. Never heard anything since though.
Give it a bash n report back, it can only say no.
Sent from my HTC Vision using XDA App
OK. I've now used the gfree package to get S-OFF too and managed to install the ClockworkMod recovery image. And I can boot into recovery too
However, in the course of my fiddling, I installed version 2.5.1.3 whereas the latest is 2.5.1.4 I believe.
I've tried to upgrade by using the "All ClockworkMod Recoveries" menu and selecting 2.5.1.4 I always get an error saying "An error occurred while flashing your recovery."
I can reflash 2.5.1.3 most times without issue.
This is all with ROM Manager Premium 2.5.0.7.
What am I doing wrong now?
R.
dicko99 said:
OK. I've now used the gfree package to get S-OFF too and managed to install the ClockworkMod recovery image. And I can boot into recovery too
However, in the course of my fiddling, I installed version 2.5.1.3 whereas the latest is 2.5.1.4 I believe.
I've tried to upgrade by using the "All ClockworkMod Recoveries" menu and selecting 2.5.1.4 I always get an error saying "An error occurred while flashing your recovery."
Click to expand...
Click to collapse
Although there seem to be 2.5.1.4 versions if you go to the download link directly at http://koush.tandtgaming.com/recoveries/ , there aren't any for Vision (DZ/G2) there. So I think the message you're getting from Clockwork about a newer version is wrong, and you're on the latest (2.5.1.3) already.

[Q] How do I start my Desire hd in recovery mode?

Happy New Year everyone!
As the title says, I'd like to start my phone in recovery mode so I can flash a new ROM on it...being a total noob here, I have no clue on how to do that...any help available please?
Thanks so much
If you have all the pre-requisites (root, s-off and/or radio s-off, clockworkmod recovery installed), you go to recovery either by
a) Enter the ROM Manager app and click "Reboot to Recovery"
b) Reboot the phone while holding the "volume down" button, this will take you to your bootloader. Scroll to highlight "RECOVERY" (with volume buttons) and press the power button to select it.
That's it
tmh said:
If you have all the pre-requisites (root, s-off and/or radio s-off, clockworkmod recovery installed), you go to recovery either by
a) Enter the ROM Manager app and click "Reboot to Recovery"
b) Reboot the phone while holding the "volume down" button, this will take you to your bootloader. Scroll to highlight "RECOVERY" (with volume buttons) and press the power button to select it.
That's it
Click to expand...
Click to collapse
Thanks tmh, it looks like I have to "have all the pre-requisites" first then...now how to I do all that...is there any "how to" guide for that?
Quite a few guides if you head on into the Desire HD Android Development forum. There are guides for for rooting, installing eng hboot, radio s-off, custom recovery etc. there. And a nice "glossary" as well, if things like s-off and stuff is jibberish to you, as it was to me when I got my DHD (came from a Hero)
Do note though, that if you updated your DHD with the latest OTA update (firmware 1.72.something), you CAN NOT root it yet, and therefor not install any of the other pre-requisites for installing custom ROM's.
uhmm...I just got it yesterday so I haven't touched any of that stuff yet I guess I need to find out what exactly am I running now and then take it from there...but first of all I have to figre out what "root" means...lol
thanks so much for the quick answers
Then I suggest you start out by reading this thread then, as it explains most of the terms you'll encounter on your way to installing a custom ROM
Don't accept any ota updates either. Otherwise you will become just another user who can't get root.
Sent from my performance enhanced Desire HD
Hello guys... I *think* i have all the prerequisities, but when I boot into recovery from Rom Manager, the phone just shows me a picture of the phone with a red exclamation mark inside a triangle... any ideas what that is?
Thanks!
thanks, was looking for this
Ah darn, I got it now: I have to press vol. up and power and I get the menu.
However, I have an error message:
E:Can't open cache/recovery/command
Also, the image (filename: r2-update-modacocustomrom-ace-sense-signed.ZIP) does not appear in the list, only an update.zip. So what do I do?
Thanks again...
PS I wiped the cache folder, made sure its empty through ES Explorer, but the same problem persists....
PS2 Current recovery: Clockworkmod 2.5.1.3
krakout said:
Ah darn, I got it now: I have to press vol. up and power and I get the menu.
However, I have an error message:
E:Can't open cache/recovery/command
Also, the image (filename: r2-update-modacocustomrom-ace-sense-signed.ZIP) does not appear in the list, only an update.zip. So what do I do?
Thanks again...
PS I wiped the cache folder, made sure its empty through ES Explorer, but the same problem persists....
PS2 Current recovery: Clockworkmod 2.5.1.3
Click to expand...
Click to collapse
You can't be on Clockworkmod 2.5.1.3 because the red triange is the stock recovery!
Are you 100% sure you have permanent root and either radio s-off or eng hboot s-off?
If you only have root, and not some form of s-off then rom manager will report you have flashed CWM correctly but the stock recovery will be restored when you reboot.
dr.m0x said:
You can't be on Clockworkmod 2.5.1.3 because the red triange is the stock recovery!
Are you 100% sure you have permanent root and either radio s-off or eng hboot s-off?
If you only have root, and not some form of s-off then rom manager will report you have flashed CWM correctly but the stock recovery will be restored when you reboot.
Click to expand...
Click to collapse
Thanks - that was an eye opener! Rom Manager reported that current recovery was the one stated, even after reboot, so I assumed all was correct.
I had used Easy Radio Tool 2.2 a couple of times, choosing the first option (Radio S-OFF, Super-CID and SimUnlock (usual)), and it reported success. Then I tried only doing Radio S-OFF and it worked first time around...
Thanks for your input!
krakout I had the same problem as you. I rooted my DHD installed Rom Manager then install Clockworkmod. Next I tried to back up my rom and got an phone with a triangle sign.
Then I went into the recover menu and it was the stock one not Clockworkmod. I solved this issue by flashing Clockworkmod again after using Easy Radio Tool 2.2 and choosing the first option (Radio S-OFF, Super-CID and SimUnlock (usual))
Skyaxe said:
krakout I had the same problem as you. I rooted my DHD installed Rom Manager then install Clockworkmod. Next I tried to back up my rom and got an phone with a triangle sign.
Then I went into the recover menu and it was the stock one not Clockworkmod. I solved this issue by flashing Clockworkmod again after using Easy Radio Tool 2.2 and choosing the first option (Radio S-OFF, Super-CID and SimUnlock (usual))
Click to expand...
Click to collapse
Yes - indeed, as mentioned above, even if ROM Manager reports that it has flashed the custom recovery, this is not always the case...

[Q] [S] Clockworkmod Recovery

I downgraded from 2.3.4 to 2.2, unlocked bootloader, and rooted with unrevoked 3.32 and no matter what I do, Clockworkmod Recovery won't install. I tried with unrevoked, using command prompt, and through rom manager. Its unlocked with s-off.
With unrevoked, I tried installing clockwork 5.0.2.0 and when i start clockwork, i just get the clockwork logo.
using command prompt, I get the FAILED remote access:denied
and rom manager replies with unable to get permissions box.
...Please help
chick3n564 said:
I downgraded from 2.3.4 to 2.2, unlocked bootloader, and rooted with unrevoked 3.32 and no matter what I do, Clockworkmod Recovery won't install. I tried with unrevoked, using command prompt, and through rom manager. Its unlocked with s-off.
With unrevoked, I tried installing clockwork 5.0.2.0 and when i start clockwork, i just get the clockwork logo.
using command prompt, I get the FAILED remote access:denied
and rom manager replies with unable to get permissions box.
...Please help
Click to expand...
Click to collapse
Fastboot flash the recovery.img
fastboot flash recovery recovery.img
chick3n564 said:
I downgraded from 2.3.4 to 2.2, unlocked bootloader, and rooted with unrevoked 3.32 and no matter what I do, Clockworkmod Recovery won't install. I tried with unrevoked, using command prompt, and through rom manager. Its unlocked with s-off.
With unrevoked, I tried installing clockwork 5.0.2.0 and when i start clockwork, i just get the clockwork logo.
using command prompt, I get the FAILED remote access:denied
and rom manager replies with unable to get permissions box.
...Please help
Click to expand...
Click to collapse
Sounds like you probably aren't rooted but you also should try using unrevoked 3.22 rather than 3.32. Below is a section from a guide I posted for rooting your inc.(that is if you were unable to flash recovery.img) hope it helps
nschiwy said:
Step 2: Flash Clockwork Recovery to your phone
You now need to download a few more files and place them somewhere that will be easy to find.
Unrevoked 3.22 from Mediafire – NOTE: if this link ever becomes broken, you must use version 3.22, 3.32 will NOT work.
Clockwork 5.0.2.0 from PvilleComp.com – make sure you use clockwork 5.0.2.0 with md5: e8ac35ddc1c37000bb0852d1f380b5bb
Next, run unrevoked 3.22, as an administrator if you can. And click file>Custom Recovery… and select the .img file which is inside the Clockwork 5.0.2.0 .zip that you downloaded, you may need to extract the folder first.
Next you can plug in your phone and select charge only and then go to Settings>Applications>development> and enable debugging.
Unrevoked should now recognize your phone and bring up a warning dialogue. Click ok and Unrevoked will run and flash Clockwork 5.0.2.0 to your phone. Do not touch your phone until you see a terminal-like screen on your phone in all blue text on a black background.
you can navigate clockwork using the scroll button at the bottom of your droid incredible to navigate and center-click for “enter”.
Click to expand...
Click to collapse
I also had issues using unrevoked and had to do it manually... Good luck
Hi guys,
I'm really new to the HTC Incredible..coming from the Motorola Photon.....finally rooted, downgraded, and installed CWM, but I still get the black screen when selecting options, ie., advanced, backup and restore...tried using ROM Manager and was able to do a back up..I'm a little confused here. Which is the working version of CWM? Thanks so much in advance!
K
EDIT: Sorry failed to mention that I am on CWM version 5.0.2.0
Thanks again!
KTT16 said:
Hi guys,
I'm really new to the HTC Incredible..coming from the Motorola Photon.....finally rooted, downgraded, and installed CWM, but I still get the black screen when selecting options, ie., advanced, backup and restore...tried using ROM Manager and was able to do a back up..I'm a little confused here. Which is the working version of CWM? Thanks so much in advance!
K
EDIT: Sorry failed to mention that I am on CWM version 5.0.2.0
Thanks again!
Click to expand...
Click to collapse
Double check that's your version of CWM, which should work. Your symptoms are standard for an older version of CWM on a SLCD screen. To be safe, go into ROM Manager, advanced options, and check erase recovery. Then reflash CWM 5.0.2.0.
Thanks for the suggestion..it didn't work. I flashed older CWMs and AmonRa but I still get the black screen with CWM logo. Thinking of:
- Fastboot erase recovery
- push recovery image
- then reflash CWM through ROM Manager?
Thoughts? Thanks again for the help!
K
Wait, black screen with CWM logo? That means you're in it, but pressed the power button at the main menu. Try pressing the power button once to get out of that when you see the logo.
Yeah..It seems like I can't select the options in the menu though I can toggle through. Its weird...even flashing the other cwm versions does the same thing.
SOLVED: Didn't realize you were supposed to use the trackpad to select..I kept pressing power...(that's how it is done on MoPho). Thanks for your help!
Sent from my MB855 using xda premium
KTT16 said:
Yeah..It seems like I can't select the options in the menu though I can toggle through. Its weird...even flashing the other cwm versions does the same thing.
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
Hmmm... By selecting the options you wouldn't be pressing the power button, would you? Have you tried pressing the OJ to select instead?
Yeah that little trackpad was the way to select..I was pressing power...so used to that..LOL

Categories

Resources