Related
I updated my rom from the original spanish version to a Artemis_Touch_3.01
After some use, the device is blocked.
It starts the HArd reset, after "Format messages" It starts HTC white screen
IPL 3.13.0001
SPL 3.13.0000
and nothing more
.
It also works ROM update mode (Three colors screen) but when I execute the Rom update frommy pc, it reaches 2/3% and gives different Errors depending the ROM,
"Ivalid Vender ID [294] when I use the ROM HTC_P3300_SPA_3.13.412.1_4.1.13.44_02.94.90_Ship_R
ERROR [270]: Update Error -The Image File is corrupted - When I use Black & Blue 4.3 or Artemis_Touch_3.01
I need help!!!
brick?
hello,
First you must open the bootloader menu,
hold voice dial button and press soft reset.
If this not working hold voice dial and on/off button and softreset.
You must connect first your htc with your pc and the start the bootloader.
When you are in the bootloader menu, you can upload an orginal fabricrom to your htc.
Search xda-developer for the fabric rom.
And then you can change your rom for something else but don't forget the uspl.
When you want to change image you must install the uspl first otherwise everthing will blocked
the problem you have is that you have to run the uspl first before you can flash another firmware. If you run the uspl you will see that the spl loader of your device is version 1.11.000 and than you can flash an other rom of your choice
greetzz Patrick
uspl does not work. this is the point you can not get it.
have a problem but I cannot find anything useful for my case, maybe you can help me?
pvdhelm said:
the problem you have is that you have to run the uspl first before you can flash another firmware. If you run the uspl you will see that the spl loader of your device is version 1.11.000 and than you can flash an other rom of your choice
greetzz Patrick
Click to expand...
Click to collapse
Hi Patrick,
I have a dutch rom on my htc P3300
IPL: 1.12.0001
SPL: 1.12.0000
GSM: 02.67.90
os: 1.12.0.0
my HTC remains stuck on the startup screen (logo HTC) and will not get any further.
Connection with active synch is not possible, ans holding the buttons reset-voice rec-on/off buttons don't react. WM cannot be started in that way.
is it possible to find a boot program which allows me to start up WM again like a regular PC? something like a emergency startup disk? I have a 2GB micro SD card. After reading and trying so many things, I lost the way in this site and was hoping maybe you can send me some useful links that can solve my problem? I would appriciate the effort.I don't know if it's allowed to send my personal emailadress? If it is allowed please let me know. Maybe we can exchange directly some info, otherwise I don't have a problem mailing this site.
(I hope I can find this thread again after closing?)
Kind regards , Eli
my artemis is also in the same state
Hi All,
Please help me with problem which I am facing with my HTC P3300
When i switch it on..Its stuck in the state where it shows
IPL 3.07.0001
SPL 1.11.0000
GSM 03.08.90
OS 3.4.0.0
What I tried.
1. I tried USPL , its not loading as device is not getting detected in my laptop.
2. Volume Down+Reset is not working
Please help me with this
Hello !
First, sorry for my english.
Then, my SPV M650 (Artemis) is bricked.
It shows "Searching for SD Card" and still stay on the bootloader screen (the muticolor screen) and nothing else.
On the bootloader scren I can see the IPL and the SPL numbers :
IPL: 3.13.0001
SPL: 3.13.0000
When I connect the phone via an USB cable, on the phone screen I've got a "USB" item appears at bottom left and Windows XP see a pocket PC connected (but not activesynced).
When I tried to reflash it with the RUU tool, I always got an error 260.
The RUU tool can't connect to my phone.
For me, the SPL is not good but I don't know how to change it with my phone in this state.
I tried to flash it directly with a 2GB SD card (FAT32 formated) with only a ".nbh" file at the root directory but it don't work.
If someone got an idea... I will take it with pleasure...
Thank you for your help.
Hi,
Are you following these instructions:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
I see from your SPL that you are not using the USPL so your flash image would have to be your original unmodified SPV M650 flash image. The name of the image file must be ARTEIMG.nbh or it will not be found.
Hope that this helps,
Matt.
Thank you for your help.
The phone is always on the boot loader but the flash with the original Orange ROM modified my IPL and my SPL (only after the second flash).
New IPL: 1.84.0001
New SPL: 1.84.0000
The flash not take 30min as follows in the wiki.
The steps during the falsh are :
- Checking SD Card
- Validation
- Formating BINFS (1s)
- Reading from SD (5min)
- Verifying certificate (5s)
- Flashing EXTROM (1s)
- Flashing GSM CODE (1s)
- Flashing first phase OS (10s)
- Reading second OS from SD! (5min)
- Flashing second phase OS (3s)
- Success. Press any key.
=> Back to bootloader.
So the phone still bricked.
It seems that you have now a working IPL, so now try to flash the USPL, after that your phone should have SPL 1.11.000 (or so )
Link: http://forum.xda-developers.com/showthread.php?t=311403
After that you should be able to flash any ROM you like.
Don´t forget to first flash a Radio!
Link: http://wiki.xda-developers.com/index.php?pagename=Artemis_RadioUpgrades
Good luck!
Thank you four your help mat2206.
But how can I flash USPL with a bricked phone ?
From SD card it's not work. I get a "Invalid certificate" error.
And for flash a new radio or ROM version, I will need the USPL...
Any ideas ?
Damned !
I find the way to flash USPL.
But I've got an 270 error when I did it at 99% of the flash.
Now the phone don't turn on. Not feels good...
Any ideas ?
drummer01 said:
I find the way to flash USPL.
But I've got an 270 error when I did it at 99% of the flash.
Now the phone don't turn on. Not feels good...
Any ideas ?
Click to expand...
Click to collapse
You need HTC assistence! You have damaged the SPL and now the phone is died!
You can't power on, you can't start bootloader, you can't do anything...
HTC Assistence
cesconoa said:
You need HTC assistence! You have damaged the SPL and now the phone is died!
You can't power on, you can't start bootloader, you can't do anything...
Click to expand...
Click to collapse
Thank you for this news.
But the phone is not under guarantee.
And I don't want to pay much money for unbrick my phone...
drummer01 said:
Thank you for this news.
But the phone is not under guarantee.
And I don't want to pay much money for unbrick my phone...
Click to expand...
Click to collapse
I hope you find a solution, I don't know if it's a way to write the rom without bootloader (something like JTAG)...
I've read a way in the assistence manual, but you need a particolar sim card...
Hi there, I'm Italian I'm here because your'e the only one on this planet who can help me.....so sorry for my english.....
I had some trouble with my diamond, the touch screen is no longer working so I have to send it back to htc, now I have to restore original rom and spl.....
I installed olinex 1.40 and the last original italian rom 2.03....
Now I downloaded my former rom (1.93.772) from italian server, I installed it and everything seemed to be right, (I can't check it because the diamond blocks me at the aligning screen, the touch screen is broken and I can't start the phone...the aligning screen appears to me forever and there's no way to bypass it)...
Then I downloaded the original spl 1.93 from your server...I cant use active sync because I can't start the phone so I have to work in boot mode.....I followed carefully the procedure, that is quite easy, but there is no way to remove the olinex 1.40, the process starts, it reachs 100%, but when i check the spl is always the 1.40 olinex....and restore original spl...I try also the usb trigger mode, with the spl putted as dimndimg.nbh...
Please help me!!!!!!!!! I' going crazy!!!!!
Thank you very much for the attention...
DAVID
do you hear me?
hi
hi, did you check out this? http://forum.xda-developers.com/showpost.php?p=2324837&postcount=20 see if that helps you.
I read everithing and now I'm a sort of diamond technician, but I cannot solve this problem, I can only flash in bootloader mode cause the telephone cant initialize windows, it' blocks in the aligniment screen and can't go on, so maybe the bootloader mode isn't strong enough to by pass the write protection of the 1.40 olinex and overwrite the hardspl...HELP HELP HELP
I'got the same issue, you have to install a rom !! and use ActiveSync in order to get the SPL1.93 ! I think in bootloader mode, you can't change the SPL!
Good luck
Freaky, I have the same issue it will not remove no matter what.
HTC have sent mine back, they say the HardSPL 1.40 OliNex damages the mainboard and causes touch screen failure! They want £230 for a new one
If you find out how to remove let me know, I've flashed all sorts and no luck it still says it.
Andrew
PS) I have activesync working with a failed touch screen (stuck on the align screen window), copying and running stock 193 in /internal doesn't change it. When I try:
http://forum.xda-developers.com/show...7&postcount=20
it sits at 0% then fails. The other program they mention to force it uinto bootloader I can' run obviously because the touch screen is broke.
miscioidi said:
Hi there, I'm Italian I'm here because your'e the only one on this planet who can help me.....so sorry for my english.....
I had some trouble with my diamond, the touch screen is no longer working so I have to send it back to htc, now I have to restore original rom and spl.....
I installed olinex 1.40 and the last original italian rom 2.03....
Now I downloaded my former rom (1.93.772) from italian server, I installed it and everything seemed to be right, (I can't check it because the diamond blocks me at the aligning screen, the touch screen is broken and I can't start the phone...the aligning screen appears to me forever and there's no way to bypass it)...
Then I downloaded the original spl 1.93 from your server...I cant use active sync because I can't start the phone so I have to work in boot mode.....I followed carefully the procedure, that is quite easy, but there is no way to remove the olinex 1.40, the process starts, it reachs 100%, but when i check the spl is always the 1.40 olinex....and restore original spl...I try also the usb trigger mode, with the spl putted as dimndimg.nbh...
Please help me!!!!!!!!! I' going crazy!!!!!
Thank you very much for the attention...
DAVID
Click to expand...
Click to collapse
In order to switch from 1.40 to 1.93 HARD SPL, you must you the jump spl program. It's in my signature. Also read the txt included for the instructions.
Let me know how it goes...
band27 said:
In order to switch from 1.40 to 1.93 HARD SPL, you must you the jump spl program. It's in my signature. Also read the txt included for the instructions.
Let me know how it goes...
Click to expand...
Click to collapse
>> prun JumpSPL.exe ...
ERROR: CreateProcess failed with errorcode = 30123
- UNKNOWNERROR: 0x000075ab
snoopy20 said:
>> prun JumpSPL.exe ...
ERROR: CreateProcess failed with errorcode = 30123
- UNKNOWNERROR: 0x000075ab
Click to expand...
Click to collapse
First plug phone into computer via active sync....
Then:
Copy the following files to the Diamond root directory
"Copy JumpSPL.exe & "copy SSPL"& sspl-1.01-reloc-mod.nb
Then: "execute Diamond SPL now - screen may trun black"
Then: "run DiamondCustomRUU.exe to flash any HardSPL
What is "copy SSPL" ??
snoopy20 said:
What is "copy SSPL" ??
Click to expand...
Click to collapse
Copy means either to right click and select copy to then past it to the root of the diamond directory or you can choose to drag this file to the diamond directory. Then continue to copy the other files.
Another way is to just start with the Diamond-SSPL.exe file and it will tell u to copy these files one by one. Make sure that you are activesynced prior to started this.
What I mean is WHAT IS sspl.exe
It's not in your magic zip file.
And when I find it, how can (I / We) execute it with failed touchscreens?
Still getting ...
>> prun JumpSPL.exe ...
ERROR: CreateProcess failed with errorcode = 30123
- UNKNOWNERROR: 0x000075ab
I'm having the same problem tryng this stuff...does't work at all....I sent 2 private message to olipro but no response....Is there someone out there who can hepl me??????
is there any absurd rom using just the button of the pda excluding the touch screen??????
You must flash in bootloader mode and run ROMUpdateUtility.exe in "C:\ROM" with file "RUU_Signed.nbh" 1.93 version in his directory (C:\ROM).
Use Windows XP and cable miniUSB original and Activesync of course.
1)Use Activesync conected.
2)Copy ROMUpdateUtility.exe and RUU_Signed.nbh (HardSPL 1.93)
3)Enter in bootloader mode
4)From "C:\ROM" run ROMUpdateUtility.exe
Leoarg....I can't activesync the diamond in bootloader mode....I can activesync only if I start the diamond in normal mode....when it reaches the aligniment screen it stops and sinconize
miscioidi said:
Leoarg....I can't activesync the diamond in bootloader mode....I can activesync only if I start the diamond in normal mode....when it reaches the aligniment screen it stops and sinconize
Click to expand...
Click to collapse
mmmm, Ok. What problem!
Why remove the 1.40 is so hard?????.....why flashing in bootloader mode doesn't bypass the overwriting protection?? why olipro is not answering my private message?
Hello,
I've got an touch diamond with hard spl and windows mobile 6,5... but today my touch screen doesn't react on touching anymore so I need to send it for warranty. I had an backup of my original spl but I lost it installing windows 7...Now I need an original spl for my vodafone phone... Maybe someone can help me with this(I'm from holland don't know if that matters for the version of the spl...)
already many thanks...
Erick
Try searching on the Vodafone website for a Rom for your device, if you are able to find it then flash it, it will install the rom and radio, but the SPL will remain HardSPL. As the final step when you have your stock rom flashed is the SPL flashing, the SPL can be extracted from the Vodafone rom package with "nbh extract"... when you will have it follow the steps in the HardSPL thread where you can find the way to flash the original SPL...
Allright, I installed a new firmware from the internal storage because my touch screen doesn't work... now the only thing i need is the original bootlader. I tried nbh extract but it doesn't work on my windows? (windows 7) here is the link to my original rom http://www.vodafone.nl/Vodafone/wg2...igned_Diamond_52.44.25.24_1.08.25.08_Ship.exe
maybe someone can help me how to install the bootloader...(again I have no touchscreen anymore
regards and thanks already
heres how i envisage doing it.
you need to run jumpspl on your phone. I guess you can still run an OS and execute apps using the navi pad and action key.
if you have done the jumspl correctly your screen will rurn blank connect your phone to your PC and then you can flsh the original spl back!
i attach the jumpspl with instructions as well as the SPL.nb file extracted from the ROM which you posted the link to.
i did not recreate it as an nbh file as i do not know what model ID, country ID,Version and language your phone, is may be some one else can tell you! or if you tell me can build a flashable nbh for you!
i ask can some one else to please verify this procedure first, before you attempt doing it!
Well great thanks for the help but maybe you can make a flash file for me...the next thing is the problem, windows is installed and when you want to start windows you will need to tap te screen to run the standard procedure to allign the screen and set the date...I can't do this without touch and so i can't load any apllications how do i find the info that you need?regards
Can anyone tell me where to find:
ID, country ID,Version of my HTC touch Diamond??(without touch screen)
regards
alrright the next things i've found hope that it helps for creating a nbh file for my spl instead of the hardspl...
Country - The Netherlands
Dutch Language
Rom1.93
DIAM100
FCDID:NM8DMS
ok ive done it with the info you gave but i also used some of the generic info like Moel ID= Diam**** .... etc
the nbh is built but you should get confirmation off some one else before you proceed! i take no responsibility ! hope this helps
can somebody check/confirm this? Already many thanks! regards Erick
allright i installed it but it doesn't work still have got olinex spl...at this moment active sync is working maybe someone can help me out now?
regards
it wont work until you run jump sl properly! jump spl overides the write restrictions on the spl!
if you run jump sply correctly the screen will go blank as soon as you execute it!
then connect you usb cable and flash! (whilstthe screen is blank)
already thanks for the great help, JUMPSPL is running! now i try to install the rom with customruu and then copy the nhb you made for me in the same directory..only it still stays on olinex
CustumRUU says it is installed correctly and that it's finished...I think Jump SPL isnt working like it should, the screen is not turning black but it says that i can install the spl...I think the problem is that i can't alling the screen and windows is not fully loaded yet..?
regards
mmm, the problem is jum spl alright! im sorry i dont have a solution for you may be some one else can help! try searching i quiet sure i have read similar problems elswhere!
yeah the problems are there enough but no sollutions to it...I need the following thing...In the startup folder of windows mobile there is the welcome screen, i wan't to delete it so maybe i can go throug loading windows and then i maybe can load the jump spl...just to skip the allignment of the screen...but when i want to delete the files it says that i've got no autohority, also not with total commander, maybe someone knows anything to delete the files with active sync..?
regards and many thanks already to idristo
I really need some help!
I was following the the post The DEFINITIVE MTTY Thread!! REVISED 02-11-09 and I made a mistake as follows;
blanktruth said:
Ok, first of all I did not think that it was this dangerous to use MTTY!.
I followed everything and came to these lines
---------------------
Cmd>task 8
Cmd>
---------------------
But after Cmd>task 8 my device restarted immediately before the second line Cmd> appears and I panicked and disconnected my device and pushed the wrong buttons while "Touch Diamond" logo was on the screen.
Now, nothing happens. I can not start from the beginning because I can not start the bootloader by pushing Vol Down and the small red reset button...
Is there anything else left for me to try? Or should I throw my HTC to garbage?
Click to expand...
Click to collapse
Now, I do not know how, but I brought my HTC to bootloader mode and now I can see it via MTTY. But I mistakenly formatted the Internal Storage while I was trying to bring my HTC to bootloader.
Is there any way to upload the DIAMIMG.nbh file to Internal Storage? Or should I follow a different way to save my HTC Diamond?
i have the same probnlem!! with my diam300
my bootloader show not Diam300 64m but only 64M on the first position in 3color mode... plz help
Connect the Diamond and run the customruu.exe from your desktop, this should work.
how to connect if i used mtty... its clear everything what i have on device storage and in bootloader canot start stock or developed rom...
if i want start hard spl its say invalid model it....
blanktruth said:
I really need some help!
I was following the the post The DEFINITIVE MTTY Thread!! REVISED 02-11-09 and I made a mistake as follows;
Now, I do not know how, but I brought my HTC to bootloader mode and now I can see it via MTTY. But I mistakenly formatted the Internal Storage while I was trying to bring my HTC to bootloader.
Is there any way to upload the DIAMIMG.nbh file to Internal Storage? Or should I follow a different way to save my HTC Diamond?
Click to expand...
Click to collapse
The only thing to do now is to flash back a stock ROM or use a custom ROM with the RUU.
Solved!...
Dom1n8tr1x said:
First of, your device is supposed to soft-reset after the "task 8" command and you should have been holding down the "Volume Down" and "Back Buttons" to begin flashing your new ROM. The whole idea of using MTTY is to format your Main Storage and flash a new ROM. Therefor you should have loaded the ROM that you wanted to flash onto your Internal Storage.
Click to expand...
Click to collapse
Thank you for your reply.
Actually I had uploaded the ROM to my internal storage, but during trying to bring my phone to bootloader mode, I formatted the internal storage...
Anyway, what I did now is, first I opened the USB Connection feature from ActiveSync, and then used CustomRUU.exe to Flash the ROM...
Everything is solved now...
Thank you very much all...
ilijan said:
how to connect if i used mtty... its clear everything what i have on device storage and in bootloader canot start stock or developed rom...
if i want start hard spl its say invalid model it....[/QUOT
bootloader is all you need to revive the phone
connect it to usb in bootloader mode and just install an oficial diamond rom from an windows xp pc.
it's easy
Click to expand...
Click to collapse
plz write here step by step guide how you solved
How it was solved...
ilijan said:
plz write here step by step guide how you solved
Click to expand...
Click to collapse
Actually the most crucial part was to bringing phone to boot loader mode. And I think I managed that by pushing the Volume Down and Back (the arrow pointing left) buttons immediately after restarting my phone. And I had to do this after taking out the battery and putting it back after 5 sec.
When I pushed these buttons at the start up the phone tried to install the ROM from my internal storage, but as I explained I had deleted it by mistake. Therefore it could not find the ROM. I disconnected my phone from my PC and the screen started to say something like Retrying USB connection or waiting for USB connection, something like that.
I restarted my PC in Digitally Signed feature disabled by pressing F8 during start-up. Reconnected my phone to PC (the screen of the phone was still blinking as waiting or retrying usb connection). And voila the phone screen changed to boot loader mode...
The rest was easy. I opened the USB connection feature from ActiveSync and used CustomRUU.exe with a ROM to flash my phone...
That is all...
1. plug phone in to computer in bootloader
2. run customruu or stock from rom update on computer
3. wait for rom to flash to device
4.???
5.profit
but my booloader dont show model ID: DIAM300 64M what i had befor
and show me only: 64M
and any flash error with invalid model id, i canot flash, rom, stock rom, or hardspl...
understand me.. im not totaly noob... i used mtty X times... but now have this probles
can somebody help me?
my diamond dont have model id...
before i had in bootloader mode DIAM300 64M model id, but now i havent got... its show only 64M,
every rom flash stopped at 1% cose model id error,
every hard spl falsh finished 100% but after flash when device restart write model id error...
i cant do anithing... can somebody help me?
For everyone facing problems after flashing his/her device, take a look at the link in my sig.
There you can find a guide to restore your diamond.
you dont understand me..
i canto flash any rom any hard spl becous my diamond dont have device ID...
in bootloader dont show DIAM300 64M but only 64M
after all flash say error mobile ID...
i try mtty, hard reseted, soft... and nothing
after start its show me only first stock screan, the red text on the right bottom sight dont start: 1.17.25.14
2.100000
geny d2x
its maybe wrong but i forgot what waz here...
how can change device model ID? form 64M back to my stock DIAM300 64M?
Try another version of Hard-SPL, some people report that 1.40 not fully works.
I suggest you try 1.94 Olinex.
my diamond is death... if somebody know how can heal it... plz write me...
my device ID is missing... so i cant flash any rom, any hard spl, any radio...
try this? http://forum.xda-developers.com/showthread.php?t=409425&highlight=invalid+model+id
im not sure but i dont think one can brick his/her phone after hard spl, thats the reason of hard spl in the first place that u dont brick it. boot loader is always present
Guide
if you are using Windows XP try the following steps:
Connect your device to your PC
In Active Sync > connection settings > check Allow USB connections (which you have un-checked while doing MTTY)
Find a ROM with CustomRUU.exe / diamond wrapper
Now enter into bootloader mode(forget about the device ID)
Go to customRUU.exe and run it
Follow the ROM installation steps
This will help you installing your new ROM.
I had a similar problem and i resolved it by follwoing the above steps.
Guide
if you are using Windows XP try the following steps:
Connect your device to your PCIn Active Sync > connection settings > check
Allow USB connections (which you have un-checked while doing MTTY)
Find a ROM with CustomRUU.exe / diamond wrapper
Now enter into bootloader mode(forget about the device ID)
Go to customRUU.exe and run it
Follow the ROM installation steps
This will help you installing your new ROM.
I had a similar problem and i resolved it by follwoing the above steps.