Latest kernal- no installation of apps? - Touch Pro2, Tilt 2 Android Development

im running xdandroid BLAZN on my rhod210 and im using the latest kernal. And apps wont install anymore from app market or through apk installer. Even apps that are already installed if you uninstall them they wont reinstall. Anyone else having this problem?
also my home/power button still isnt doing its designated function of bringing me to home screen? this problem occured about 5 updates ago so shouldnt it be fixed? iv heard its literally a one line change to fix this.
And does any1 else think that stability has decreased in the latest kernal updates? if i play music so i can hear when it goes off, i get sleep of death every 3minutes when in sleep mode. Also android restarts to splash startup screen regularly which is annoyn as incoming messages are rejected when this happends.

Wow... Let's try to break this down. The home/power button switch was intentional... so it's not going to get 'fixed' as you say. See this thread if you want to revert the commits in question that change the button layout.
App/market issues are almost always fixed by deleting your data.img and starting clean - this will wipe all user data off of the phone, you'll basically be booting for the first time again as far as the system is concerned without a data.img.
Stability... it's like battery life - perception is everything. I wouldn't say the new builds are any more or less stable than the previous ones, no. In fact, I would say they're more stable, but that's just me.

+1 What arrrghhh said!
We're most fortunate to have arrrghhh.
I also find stability has continued to improve with most kernel, modules, & rootfs updates including the most recent.
I can only add that until Sov updates to the Froyo [2.2] [25-10-10] System.ext2 in his Blazin build USE his Reference build. And if you must overclock at least DON'T when your building a new data.img file.
I get considerably more SOD & other abnormalities when overclocking at any level.

tank you arrrghhh and LDgator.
My app installation problem started when i updated the kernal so i presumed that was the problem but if im the only one with this problem then its more than likly my data.img, i will move and rename my data.img have it create a new one to check of that is the problem and iv been using blazn because i presumed it would be updated soon after reference. But its been awhile now so yeah maybe i will switch to reference for the time being maybe will solve my stability issue's.

Related

[Q] Trouble with all android software

Hello all, First, I searched the forums for my answer with no such luck, that being said if Im repeating a question thats been asked I apologize. I have a problem with keeping android stable. I have flashed with different versions of windows several times all with success. I do however, prefer the android system, I find that it runs much better, faster and has better perks. Everytime I flash following the original how to, I run in to a couple similar problems.
The first is when I hit the power (not hold the power) the back light cuts off and the keyguard enables, the screen goes dark all as it should. Depending on the time ( the longer it is the worse it is) when I hit the power key to revive my phone, I often get a white screen, then it waits , then it goes dim, Sometimes If I hit the power button several times it eventually comes back to the key guard option, but others I have to remove the battery and reboot. This is the major problem, as I cant use my phone when I need it. This problem seems to get worse the farther it gets away from the flash date, e.g..,, after a brand new flash it works pretty good and then it goes downhill from there.
Second, it seems to lock up when I let it charge overnight, not always (but most of the time) I get up, click the power button to revive the phone and I have a white screen before me that is frozen solid. This like the previous problem seems to be linked to the distance from the last flash.
I hope that its something Im doing wrong, as Im currently using wmobile 6.5 and since Ive had a taste of the droid os, my wm phone is just disappointing. And as I was unsuccessful in finding a post that adequately describes my problem ,Im hoping that there is a way around this .
I have tried, Incubus Superfroyo, Wrym warm donut, and Cyanogens build. Im sure Ive tried others, they just escape me, I was re-flashing daily until I went back to windows. I truly hope someone out there has encountered what I have and has a solution. thank you all for what you do, these forums have been extremely valuable and helpful.
Sounds like you have the wrong panel type selected. Is it set to auto? if it is, try setting it to 2 instead. That cleared up the problem for me.
Tried all panels all have the same problem.
Well thanks for all the many replies. I give Ive tried everything on this site and m android is still really glitchy. Guess it will be windows until I get perhaps a phone capable of running android smoothly.
What kind of phone do you have?
Sent from my HTC Vision using XDA App
do you have an SD card you can try to boot from and share your settings?
What we need to know is which kernel you're using, or an image of the kernel you currently have. Also, we need to know which radio version you're using, as this can have detremental effects on stability as well.
Personally, I have been using radio version 1.70.19.09, which seems to be the most stable with kernel .25 IMHO.
I have also "personalized" ThoughtlessKyle's "Fat-Free Froyo", adding/removing apps that I need or don't use respectively (navigation, QQPlayer, Pandora, etc.).
Currently, I think I might be one of the only people not experiencing any issues with this phone running Android 2.2.1. I do get the occasional "hang" (I wait for it to finish what it's doing instead of force close), but that usually has something to do with network coverage or an app requesting something from an unopened port.
Old phone, new OS and runs smooth as could be expected.
Next for me will be the HTC HD2 (if I get one at the right price, the tilt was free)...
I know, I know that MANY PEOPLE THINK OF THE WAKE UP WHITE JIBBERISH SCREEN as NEVER WORKING.
PoXFreak said:
What we need to know is which kernel you're using, or an image of the kernel you currently have. Also, we need to know which radio version you're using, as this can have detremental effects on stability as well.
Personally, I have been using radio version 1.70.19.09, which seems to be the most stable with kernel .25 IMHO.
I have also "personalized" ThoughtlessKyle's "Fat-Free Froyo", adding/removing apps that I need or don't use respectively (navigation, QQPlayer, Pandora, etc.).
Currently, I think I might be one of the only people not experiencing any issues with this phone running Android 2.2.1. I do get the occasional "hang" (I wait for it to finish what it's doing instead of force close), but that usually has something to do with network coverage or an app requesting something from an unopened port.
Old phone, new OS and runs smooth as could be expected.
Next for me will be the HTC HD2 (if I get one at the right price, the tilt was free)...
Click to expand...
Click to collapse
Ill try that combination and post my results. The latest I tried was
Scoot CyanogenMod 6.1.2 RLS6 with 2.6.32 still no joy, white screen crashes and hang ups. and it seems progressively worse the longer the rom is on the phone. To whomever asked what phone I have, its the at&t tilt II
srlebonv said:
Ill try that combination and post my results. The latest I tried was
Scoot CyanogenMod 6.1.2 RLS6 with 2.6.32 still no joy, white screen crashes and hang ups. and it seems progressively worse the longer the rom is on the phone. To whomever asked what phone I have, its the at&t tilt II
Click to expand...
Click to collapse
I can't help you regarding panel selection but, please have Radio ROM version 1.65 or higher. And do give my fresh foryo a go with 2.6.25 kernel (everything is there in the thread on how to use it with 2.6.25 kernel).
the WHITE GLITCHY SCREEN IS THE PROBLEM WITH ANDROID DRIVERS. Install with Data on SD Card often causes lockups / force closes.
I am using panel type 1 and white glitchy screen stays for like half of a second and next moment I get a nice clean keylock screen. I don't know but its like 20th time I am explaining the problem related to LCD
Change Panel Type, Get a compatible Radio version (1.65.x or HIGHER)
You say that often install with data on the sd card causes lock ups and freezes. Can you explain further what you mean ?
dark_prince said:
I can't help you regarding panel selection but, please have Radio ROM version 1.65 or higher. And do give my fresh foryo a go with 2.6.25 kernel (everything is there in the thread on how to use it with 2.6.25 kernel).
the WHITE GLITCHY SCREEN IS THE PROBLEM WITH ANDROID DRIVERS. Install with Data on SD Card often causes lockups / force closes.
I am using panel type 1 and white glitchy screen stays for like half of a second and next moment I get a nice clean keylock screen. I don't know but its like 20th time I am explaining the problem related to LCD
Change Panel Type, Get a compatible Radio version (1.65.x or HIGHER)
Click to expand...
Click to collapse
Ok, so I installed your version of froyo, the accompanying 2.6.25, the radio that you use. For the most part the hanging up is fixed. Now the second problem is still in place. Sometimes when Its been in hibernation(or whatever you would call when you hit the power button once ) when I attempt to refresh my phone (hitting the power button once) nothing happens, the green light is still blinking at the top but the screen stays blank, normally have to remove the battery and restart to get back to using the phone. Is this a sleep setting? or is this something Ive done wrong during the installation.

[Q] CM7 eventually just starts showing black screens instead of most things. Why?

This problem only really happens after my phone has been on for days at a time. I have had this problem on the latest stable and latest nightly for CM7 (each one cleanly installed after a total wipe).
What happens is that most screens are replaced with entirely black ones. The most consistent example of this is the settings screen. The first Settings screen (which shows Display, Sound, etc) loads correctly. If I click on any of those, I just get a black screen. This will happen in other applications too, like Baconreader or Browser. Also, another connected issue is that the lockscreen won't animate once this problem starts. I can drag it down to unlock, but the rotary wheel won't move at all. If I drag to the right to load my custom app, the lockscreen won't go away and it will force my to pull the battery.
Has anyone else run into this problem? I'd just like to know I'm not alone. I'm not really expecting a bugfix, especially when I'm not even posting a Logcat.
Did you fix permissions?
midget tossing is habit...2010 midwest regional champion... hw 001
Saturn2K said:
This problem only really happens after my phone has been on for days at a time. I have had this problem on the latest stable and latest nightly for CM7 (each one cleanly installed after a total wipe).
What happens is that most screens are replaced with entirely black ones. The most consistent example of this is the settings screen. The first Settings screen (which shows Display, Sound, etc) loads correctly. If I click on any of those, I just get a black screen. This will happen in other applications too, like Baconreader or Browser. Also, another connected issue is that the lockscreen won't animate once this problem starts. I can drag it down to unlock, but the rotary wheel won't move at all. If I drag to the right to load my custom app, the lockscreen won't go away and it will force my to pull the battery.
Has anyone else run into this problem? I'd just like to know I'm not alone. I'm not really expecting a bugfix, especially when I'm not even posting a Logcat.
Click to expand...
Click to collapse
I suffered this same thing today. Thankfully a full restart fixed out, but I would love to learn a real solution.
bootny said:
Did you fix permissions?
midget tossing is habit...2010 midwest regional champion... hw 001
Click to expand...
Click to collapse
Next time it happens I will, I'm just afraid it will break Facebook/SMS integration like I've had happen before.
It's just so weird since it breaks everything. The lockscreen, the options, Pandora's station list, the browser, and it goes on and on. It's like there's some sort of display mode that gets screwed up.
dom085 said:
I suffered this same thing today. Thankfully a full restart fixed out, but I would love to learn a real solution.
Click to expand...
Click to collapse
What version are you using. I'm going to try to install nightly 77 today after a fresh wipe.
I was seeing the same thing. Now I'm trying to figure out why my data speeds are so painfully slow on CM7 so I can't offer a fix. Flashing back to Warm to troubleshoot 3G.
I get these issues all the time no matter what kernel or nightly I'm running. It has forced me back to sense roms lol
Same problem here. I updated stable mod from stable mod. Reinstalled. Going on 4 days, no issues so far.
Sent from my PC36100 using XDA App
I have the same exact issue. This never happens on a sense rom. I did some tweaks to my system over the past week and I haven't had to reboot since this past Saturday or Sunday. I thought I had fixed it!
Then...
My phone started doing it this morning after I turned on 4G at work, literally as I was writing this post it started doing it. I then turned off 4G.. and it instantly went away. Turning back on 4G and it isnt doing it right now. Now my phone is doing something weird with go sms pro... when I get a text and I respond via the pop up message.. once my text moves to a second line I dont see what I am typing anymore... and now it has progressed to where the pop up box isnt refreshing after I send a message (this is all happening while I am typing this post). Now the phone has become laggy and somewhat unstable... rebooted! All is well. So I went roughly 4-5 days without a reboot... where as before I had to reboot at least once a day.
Thats about the best I can get with these settings:
CM7 7.0.3.1
Savaged Zen 2.6.38.5 CFS > Using SavagedZen Governor, min 384 max 998
Displaying some animations (read somewhere that is a "fix".. or helping extend the time it takes for the Black screen of death to appear).
This is after several full wipes, several when I was running Amon RA recovery 1.8 then updated to the latest and did it two more times. After upgrading Amon and wiping I did not use any backups and started completely from scratch.
So I am not sure what else to do. Some people are getting this, some are not.

[Q] Screen off and keyboard is on bug

Hello,
I got an problem on like 4 of the 5 kaisers here.
The problem is that sometimes the kaisers goes into an sleep where it doenst come out without reset.
You will get an black screen and the light of your keyboard is on and doesnt turn off. When this happens the battery goes from 100% to 0% in like 40 mins. without the problem i can use the phone for 2 days.
My question is how to solve this? I tried the following things.
- Radio 1.65, 1.70. 1.71
- 2 different hspl
- old and new kernel.
- and loads of different roms. from gingerbread to eclair.
Any solution or fix for this? because i can't use it for daily base now since when i dont notice the battery is empty of that bug.
Best Regards,
Veldmuus
That's the black screen of death. I never get that, but it's one of three problems that I have heard of. I think it might be related to going to sleep. I use the latest kernel, from git, which is pretty much identical to scooter1556's kernel with separate cache. What kernel are you using?
The second problem is the white screen of death, which I get a lot when I leave the phone on the charger. The screen is white bright, the kernel is not crashed. Sometimes Fn-Right-soft-key twice will cure this, but usually not. Some have guessed that this has something to do with the phone going to sleep not quite properly while charging. There is an option to not go to sleep while connected to a charger, and I haven't tried that option for a long time.
The third problem is a kernel crash (screen freezes, keyboard doesn't turn on LED, etc) caused by compcache (zram). Can be avoided by not using compcache.
The most annoying issue I have is that I've never figured out how to tweak the build so that apps can be installed to SD. I've been trying to change initrd so that, when installed completely on NAND, the sdcard is completely managed by vold. So far no success, and I've pretty much moved on to my newer phone (Rhodium, aka AT&T Tilt2).
I have spent the last week or so "tweaking" my build.prop file, adding lines for disabling sleep mode, 3G speed tweaks (doesn't do much yet) and fixing small compatibility issues such as AGPS/GPS not working. So far so good, no more sleep of death/black screen/white screen.
If successful, I would ask that the modified build.prop file be added to the Froyo builds on SourceForge, intergrated directly as to eliminate "end user interaction", meaning you won't have to touch it.
I am also looking into some sysinit.rc mods as well, but I haven't had much time lately.
Veldmuus, do you have a way to edit your own build.prop file such as Root Explorer, or would you have to push it to the phone via ADB?

"New" problem? Sleep of Death?

Hi everyone!
So far for the past 2 years I have been running various builds of Android on various Kaisers (yes, I have 4 of them now).
For the past 6 months or so I have stuck with the 2.2.2 build from SourceForge (system_froyo_us_odex) and never had any issues... until now.
All of a sudden, for the past 2 weeks I have been getting that dreadful "sleep of death" problem, sometimes upwards of ten times a day!
Current installation is as follows:
Scoot cache kernel, 15mb cache, 500mhz, ext4, 1500mah battery.
Froyo 2.2.2 US Odexed from SF with all the stock apps, extras listed below
ADW EX Launcher ver. 1.2.2
Beautiful Widgets ver 3.3.4 with the animation package (Super clock 4x2)
Rogue tools
Root explorer
Scanner radio (barely use due to constant data usage)
Pandora (again, data usage can be high so barely used)
Facebook ver 1.8.2 or current build
Foursquare ver 2012.02.27
I have looked at dmesg on the SD and compared to one from a backup SD but cannot find anything extraordinary, nor is there anything wierd in /system/sysinit.rc. Performed a complete wipe and reinstall from stock with all the same apk's and even changed to the brand new (turned on once) Kaiser after unlock/SPL install.
If anyone sees anything out of line (except the BW 3.3.4, I like my flip clock), please do let me know. If there is any files you may need from either the phone or SD card I can paste them accordingly.
Okay, made some line entries in build.prop via root explorer's text editor and added the line "ro.ril.disable.power.collapse" with the argument set to 1, which should have turned off any sleep mode, and also added the line "pm.sleep_mode" with the argument set to 1. This after doing a search on google for build.prop tweaks (there's a bunch).
Battery life has suffered a little but it seems to have helped somewhat. It will still hard lock in sleep mode and be unresponsive until a stylus reset or battery pull.
I got an equal issue after inserting pm.sleep_mode= in my startup.txt for haret. Sometimes the 'sleep of death' and sometimes never ending boot circles. The only argument working is the default value '1'
What I ended up doing was to go back to scratch. This happened on 2 separate phones by the way so the spare was the guinea pig.
I started with the kernel first, rebuilt it and reinstalled it, then installed a clean froyo build, which would still hard-lock.
I went back even further and reflashed the SPL, then rebuilt the kernel as before and another new froyo install, which seemed to work. I then copied what I did on the spare and refreshed the newer phone and synced my accounts to it, then reinstalled all of the apps, one at a time, to make sure there wasn't one causing this.
So far so good, no SOD or hard locks.
Went in and re-edited the build.prop to add some performance mods (dalvik.vm.startheapsize=4m, dalvik.vm.heapsize=32m, etc)... seems to be better, smoother and doesn't FC apps as much.
We shall see what happens...
Well, since you can't find this post on the front page, I'll have to put up a new post about my build.prop changes that really help with speeds and FCs'.
Look for it on the front page...

Performance issue after CM nightlies updates.

Hi all!
I'm running CM11 24.06 nightly, along with Devil3 kernel on my n7100.
I've recently updated from 06.06 nightly (I believe), which was a fresh install (full wipe, no updates before), but I have had this issue before already. I think it starts to happen after I perform an update to the newest nightly. Rolling back to previous one doesn't help - another full wipe and fresh install is required to fix this or at least I didn't find a solution.
So, what's the issue? There are four issues that, to me, are connected:
1. Waking up - I'm experiencing serious lag when waking up the device. Sometimes the device doesn't want to wake up for half a minute, sometimes it doesn't wake up at all and it requires me to restart it by holding the power button
2. Lag after unlocking - Most of the time though, when device is actually successfully woken up and I want to fe. go straight to SMS app from lock screen and type something immediately, phone freezes for a second and when I'm able to type (touchscreen reacts, letter-press animation plays) - the letters aren't appearing. Sometimes it takes a while after I can type, sometimes I have to close the app. I've tried different SMS apps, deleting big conversations, different keyboard apps (I'm using SwiftKey, but stock app is the same - this one actually remembers what I type, recommends me something, but when I tap to use the recommendation, nothing is being typed into the text box) and some other things.
3. Application start up time and white status bar - Apps are starting to drop in performance as well. For example, when I run, let's say Play Store, the status bar on top of the screen is flashing white and it takes a bit longer to be able to use them (just like the SMS app).
4. % battery usage of certain (unexpected?) apps - Most battery hunger process is Android System. I've reset battery stats, for the last 1h and 45min used phone to type 2-3 messages, and it's usage is @27%, whereas 2nd process is screen with 18% and 3rd is Android OS with 11%.
Restarting the device seems to temporarily fix first three issues. They start to come back as soon as I start using the device, like opening apps, etc.
As I said before, it all happens after performing an update. Maybe I'm doing something wrong? I usually flash the update, restart device, go to recovery, flash kernel and restart. Since the issue happened again, I've tried to flash the new nightly and kernel together before, it didn't help. Clearing cache/dalvik is not helping (before, after).
I don't have any backups made (I know, I should've made one), so, I guess I'll prolly end up performing a full wipe again. But does anyone have some ideas what may be causing this? So I can prevent this for good next time, hopefully.
Ksenios said:
Hi all!
I'm running CM11 24.06 nightly, along with Devil3 kernel on my n7100.
I've recently updated from 06.06 nightly (I believe), which was a fresh install (full wipe, no updates before), but I have had this issue before already. I think it starts to happen after I perform an update to the newest nightly. Rolling back to previous one doesn't help - another full wipe and fresh install is required to fix this or at least I didn't find a solution.
So, what's the issue? There are four issues that, to me, are connected:
1. Waking up - I'm experiencing serious lag when waking up the device. Sometimes the device doesn't want to wake up for half a minute, sometimes it doesn't wake up at all and it requires me to restart it by holding the power button
2. Lag after unlocking - Most of the time though, when device is actually successfully woken up and I want to fe. go straight to SMS app from lock screen and type something immediately, phone freezes for a second and when I'm able to type (touchscreen reacts, letter-press animation plays) - the letters aren't appearing. Sometimes it takes a while after I can type, sometimes I have to close the app. I've tried different SMS apps, deleting big conversations, different keyboard apps (I'm using SwiftKey, but stock app is the same - this one actually remembers what I type, recommends me something, but when I tap to use the recommendation, nothing is being typed into the text box) and some other things.
3. Application start up time and white status bar - Apps are starting to drop in performance as well. For example, when I run, let's say Play Store, the status bar on top of the screen is flashing white and it takes a bit longer to be able to use them (just like the SMS app).
4. % battery usage of certain (unexpected?) apps - Most battery hunger process is Android System. I've reset battery stats, for the last 1h and 45min used phone to type 2-3 messages, and it's usage is @27%, whereas 2nd process is screen with 18% and 3rd is Android OS with 11%.
Restarting the device seems to temporarily fix first three issues. They start to come back as soon as I start using the device, like opening apps, etc.
As I said before, it all happens after performing an update. Maybe I'm doing something wrong? I usually flash the update, restart device, go to recovery, flash kernel and restart. Since the issue happened again, I've tried to flash the new nightly and kernel together before, it didn't help. Clearing cache/dalvik is not helping (before, after).
I don't have any backups made (I know, I should've made one), so, I guess I'll prolly end up performing a full wipe again. But does anyone have some ideas what may be causing this? So I can prevent this for good next time, hopefully.
Click to expand...
Click to collapse
i think this kernel issue..mybe u should stay with stock cm kernel..
Sent from my GT-N7100 using Tapatalk
Azhery said:
i think this kernel issue..mybe u should stay with stock cm kernel..
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Well, like I said, everything is working fine after a fresh install (with full wipe prior to it), is it possible for kernel to cause that after a nightly update?
Ksenios said:
Well, like I said, everything is working fine after a fresh install (with full wipe prior to it), is it possible for kernel to cause that after a nightly update?
Click to expand...
Click to collapse
mybe problem on nightly..do you hve try other cm based rom?
Sent from my GT-N7100 using Tapatalk
Azhery said:
mybe problem on nightly..do you hve try other cm based rom?
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Some time ago I had OmniRom and after few OTAs I actually started noticing similar issue if I recall correctly (that was the reason for me to switch back to CM).
mybe u try..full wipe..wipe data..wipe cache..wipe system..wipe internal storage..
Sent from my GT-N7100 using Tapatalk
But that's the point, I'll probably end up doing it since restarting my phone every 30-60 minutes is out of the question. But, then what? every few nightly/snapshot I'm gonna perform a full wipe?
Ksenios said:
But that's the point, I'll probably end up doing it since restarting my phone every 30-60 minutes is out of the question. But, then what? every few nightly/snapshot I'm gonna perform a full wipe?
Click to expand...
Click to collapse
mybe u can try other rom like cyanogenmodx..bcause i nver had this issue..
Sent from my GT-N7100 using Tapatalk
I was actually thinking about it, but as I said, when I used OmniRom few months ago, I recall that I had similar issues. Nevertheless thank you for your insight. Anyone have any slightest idea what might be causing such behavior?
I seem to have fixed the issue. Turns out the culprit was Business Calendar - Business Tasks to be more precise. I unistalled both and so far didn't experience those wake up lags.

Categories

Resources