Related
I know there a few threads about windshield mounts but none of them have what I'm looking for. I am looking for a windshield mount for my 2000 Ram 1500. I want it to mount on the BOTTOM on the windshield and come to the edge of the dash so it will need to be fairly long. I switch between the Seidio Innocase II surface and the Seidio 3500mah extended battery so I need something that will accommodate both of those. I also need it to switch between portrait and landscape. The Kensington windshield mount for the Iphone looks like it would be great but it doesn't look like it will allow me to use my extended battery.
What have you guys found that might work for what I need?
ive been using this...
Scosche IUHW7 Windshield Vent Mount Kit.
its inexpensive it sitcks... it turns and fits all kinds of stuff
I think I got it for 12 bucks at walmart
bacidath said:
ive been using this...
Scosche IUHW7 Windshield Vent Mount Kit.
its inexpensive it sitcks... it turns and fits all kinds of stuff
Click to expand...
Click to collapse
I might have to see if my local walmart has that. Thanks.
http://www.seidioonline.com/product-p/ck17hev4c04.htm
it is not long but with a little modification it will work.
it also holds thee innocaseII and the extended battery one.
will car dock the phone
Ram Mounts are good in trucks
http://www.ram-mount.com/
Mountek MT5000
I bought this after finding a thread about it on another forum. Best accessory ever. Extremely quick and easy to install, rotates portrait/landscape ... can't complain about anything. It uses your CD slot - you just put it in the opening and clamp it down.
It's actually started to become a problem because I'm constantly distracted while driving by my cellphone now. It's just right there up in my face, gorgeous and begging to be played with.
Can't post the link since I'm new here ... but you can Google it easily.
I like the Clingo mount so much, I am going to mod the Sedio Active Innocase I have to make it work with it (smooth.velvty doesn't stick to Clingo).
sanyi83 said:
Ram Mounts are good in trucks
http://www.ram-mount.com/
Click to expand...
Click to collapse
I've used Ram Mounts in my Jeep, good stuff!
Sent from my Desire HD using XDA App
I've got a cheap Arkon universal mount I use in my car. Works great with my ballistics case or naked.
Dunno how long it is but I have am ikd z car and its mounted to the bottom of my windshield and comes to the dash edge. Probably 6in or more. It was tricky too cause my car has a high rake angle and I wanted it mounted so it wouldn't show Tue mount at all in videos. It does block half the camera but it clamps hard enough that you can scoot it up and get the camera free.
Sent from my (insert daily ROM name here) Evo 4g
When in its case, mine fits in my Garmin windshield mount
Sent from my PC36100 using XDA App
Why not just get the seidio innotraveler? It will fit both the extended battery and innocase power their website. I have it and love it, it actually extends pretty far.
Sent from my hand with XDA Premium installed
Because the seidio one is $50! Thats crazy for a windshield mount. I found one at bestbuy yesterday its by rocketfish and made for the iphone but it works with our phone to. It doesn't come to the edge of the dash but it will work.
Can anyone recommend a car dock that works with a dashboard beanbag, so I can avoid doing the windshield suction cup?
I'm using the Verizon branded iGrip dock that I got from the Verizon store with my corp discount, it comes with a plastic disk you can stick to your dash if you don't want to put it on the window. I'm pretty sure if your beanbag mount has a similar disk on it that the dock would work with that. If you want I can try to snap a few pics later after work and post them up here.
Clingo Car Mount
Anybody ever seen or used one of these? Im going to go pick one up tomorrow just kinda wanted to know what they were like ahead of time.
http://www.clingo.com/car-mounts/universal-vent-mount/
Has anyone found a mount that works with a case, say the Seidio case?
You could check out Ram Mounts. You can basically make your own holster for any device and pick how you want to mount it. They even make aviation mounts which is perfect for those of us who are pilots.
Can anyone share a link to a good one for extended batteries.
anyone know where to buy Xoom car Dashboard Mount? my friend told me can;t use Windshield Mount in California. i alrealy buy
MENB+ME-04: Heavy Duty Windshield Mount
http://www.amazon.com/MENB-ME-04-Windshield-Motorola-Viewsonic/dp/B004T4XKVY/ref=pd_cp_e_2
now i have to buy another one!!! thanks.
mhz1000a said:
anyone know where to buy Xoom car Dashboard Mount? my friend told me can;t use Windshield Mount in California. i alrealy buy
MENB+ME-04: Heavy Duty Windshield Mount
http://www.amazon.com/MENB-ME-04-Windshield-Motorola-Viewsonic/dp/B004T4XKVY/ref=pd_cp_e_2
now i have to buy another one!!! thanks.
Click to expand...
Click to collapse
http://www.arkon.com/ & http://www.ram-mount.com/
...xoom posted...
http://forum.xda-developers.com/showthread.php?p=14448763#post14448763
shows both the pro clip and pics of the ram mount set up
thank everyone, i alrealy but another one from ebay, ($6.89)
http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=170579374411&ssPageName=ADME:L:OU:US:1123
If you can't use windscreen suction mount, than have you looked into Brodit holder mounted on ProClip? Keep in mind that most ProClips are designed for mobile phones, thus it may end up blocking instruments, vent, radio and so on as Xoom is much larger device.
A car mount is just a car mount, right? How exciting can a car mount get?
I've been using over a dozen car mounts over the years. They all work fine.....initially at least. But all of them have one problem in common. They don't last. Either the flimsy plastic parts start breaking or more likely the suction cup becomes unreliable causing the mount to fall off the windshield at the most inconvenient moments.
I picked the Exomount because I read many good reviews about it but here at last was a car mount with a difference because it claims to do things that other car mounts can only dream about - it can mount on textured surfaces like a grained wood surface or the dimpled surface of a car dash. Many reviewers also claim that it can mount on slightly curved surfaces.
I bit the bullet and got the Exomount. True enough, it is able to do all that it claimed it can do. I had a fun time trying it on all kinds of surfaces. When it comes to actual usage, the Exomount gave me a lot more choices on where to to mount my phone/gps in my car. I no longer have to mount it on my windshield if I don't want to.
The clamping jaws of the Exomount may look a little basic and primitive but it is actually a pretty good feature. It allows me to swap devices easily without the need to make adjustments to the clamping mechanism. It also allows me to mount my phone on it without blocking the camera so I can use my phone as a dash camera if I want to.
Best of all, I have been using it for more than 18 months now and it still works like new. The suction cup has yet to fail me, not even once.
The Exomount is an amazing car mount and I highly recommend it. A more detailed review of the Exomount can be found at Exogear Exomount Universal Car Mount Review.
The Exomount has a limit of up to devices with 5" displays. I have tried it with a few other phones such as a couple of Blackberries, an iPhone 4S as well as my 3.5" Garmin GPS.
My Generic Knockoff
Here's a review for the Generic Knockoff I ordered off of Ebay for $5.99. It arrived yesterday. http://sgoldfein.wordpress.com/2012/11/27/universal-cellphone-automobile-mount/
best car mount ever. i'm getting my second one for my dad
I know this question has been asked many times before, and I've read the threads for answers, but still haven't figured out what will work best. I need a good quality car mount, that's quick/easy to attach/detach, and that will work with a case. I'm currently using an Otterbox Commuter case, so the Infuse 4g mount is definitely out. I will be mounting it to the dash or windshield, so a vent/lighter type is a no-go. So far, the three that have caught my interest are the iMagnet mount, the Exomount 2 and the GripGo mount. they are all quick attach/detach mounts that will work with a case, but I can't decide which will be the most sturdy and durable.
The Exomount looks to be the better built, but what's the difference between the Exomount and Exomount 2 (aside from the different base?) Is the 2 built with better materials or something? How easy/quick is the attach/detach of this mount?
The GripGo mount is very interesting, which seems to be made of the same material that the Exomount's suction cup is made of. It consists of a bunch of tiny suction cups, which (supposedly) grip the phone very tightly. My main concern is dust... although it can be washed, I just don't want to have to wash it all the time to maintain a good grip. A big draw to this mount is the large arm it's attached to, which is much longer than the other two and provides more placement options.
The iMagnet is a brilliant idea, but I'm not sure about the execution. I've heard that the magnet isn't very strong when placed inside a case, and on a very bumpy road it can lose grip of the device. Even though I'm using an Otterbox case, I don't like the idea of my device flying off the mount and bouncing around on my dash/floorboard.
If anyone has used these mounts with their SGS3, what was your experience with them? Are there any better options that I've overlooked? I'm looking for honest opinions, good or bad, so I can make the best choice. Any info/input/advice is greatly appreciated!
i voted others.
im using the mountek car mount and it's been great. don;t have to worry about the suction cup losing suction and it's very stable. also fits my s3 with the trident kraken case, which is a pretty big case lol.
The Mountek mount looks interesting, but I'd like to keep my CD player functional... my buddies and I produce music, and sometimes we have CDs to trade (as they can be used in CD decks for mixing purposes.) I'm fine with suction cup mounts, they've always worked great for me. YMMV.
gilla409 said:
The Mountek mount looks interesting, but I'd like to keep my CD player functional... my buddies and I produce music, and sometimes we have CDs to trade (as they can be used in CD decks for mixing purposes.) I'm fine with suction cup mounts, they've always worked great for me. YMMV.
Click to expand...
Click to collapse
you can still play CDs with the mount attached.
Whenever these mount threads pop up I suggest my favorite: the Arkon Mobile Grip sticky dash mount. I've used it in several cars with numerous phones, including the GS3 and like it because of it's small footprint and it's versatility; my gf uses it in her Scion with their Mega Grip holder for her GS3.
It's a dash mount that can be put at nearly the level of a vent mount, which is my preferred location. It can also be used as a windshield mount.
And the fact that it's only $18 is pretty solid.
Shady Gambino said:
Whenever these mount threads pop up I suggest my favorite: the Arkon Mobile Grip sticky dash mount. I've used it in several cars with numerous phones, including the GS3 and like it because of it's small footprint and it's versatility; my gf uses it in her Scion with their Mega Grip holder for her GS3.
It's a dash mount that can be put at nearly the level of a vent mount, which is my preferred location. It can also be used as a windshield mount.
And the fact that it's only $18 is pretty solid.
Click to expand...
Click to collapse
That looks a lot like the Exomount, but the clip part is a bit different. I actually like the Exomount's clip better, as it's low profile and "sticks out" a bit less. I'll definitely add that to my list of options though, and I appreciate the suggestion!
gilla409 said:
That looks a lot like the Exomount, but the clip part is a bit different. I actually like the Exomount's clip better, as it's low profile and "sticks out" a bit less. I'll definitely add that to my list of options though, and I appreciate the suggestion!
Click to expand...
Click to collapse
The Exomount is actually a pretty cool mount. What I like about the arkon is that it has an adjustable arm, so I can raise or lower the height of the phone; I also like that I can insert and remove my phone one-handed. I don't think you can do that with the Exomount.
Shady Gambino said:
Whenever these mount threads pop up I suggest my favorite: the Arkon Mobile Grip sticky dash mount. I've used it in several cars with numerous phones, including the GS3 and like it because of it's small footprint and it's versatility; my gf uses it in her Scion with their Mega Grip holder for her GS3.
It's a dash mount that can be put at nearly the level of a vent mount, which is my preferred location. It can also be used as a windshield mount.
And the fact that it's only $18 is pretty solid.
Click to expand...
Click to collapse
Will it fit a galaxy note 2 in an otterbox commuter case?
I just got an iottie dash mount and love it. It's solid and loprofile and fits the s3 with a case on.
I have the GripGo - it doesn't look like it should work, but it does. I have a Mophie case which I wasn't sure would work well, but it does.
been using the imagnet for a while and love it. best mount ive used. Its definitely the most convenient because there are no parts, clips, or arms. Just stick it on. done.