anyone know where to buy Xoom car Dashboard Mount? my friend told me can;t use Windshield Mount in California. i alrealy buy
MENB+ME-04: Heavy Duty Windshield Mount
http://www.amazon.com/MENB-ME-04-Windshield-Motorola-Viewsonic/dp/B004T4XKVY/ref=pd_cp_e_2
now i have to buy another one!!! thanks.
mhz1000a said:
anyone know where to buy Xoom car Dashboard Mount? my friend told me can;t use Windshield Mount in California. i alrealy buy
MENB+ME-04: Heavy Duty Windshield Mount
http://www.amazon.com/MENB-ME-04-Windshield-Motorola-Viewsonic/dp/B004T4XKVY/ref=pd_cp_e_2
now i have to buy another one!!! thanks.
Click to expand...
Click to collapse
http://www.arkon.com/ & http://www.ram-mount.com/
...xoom posted...
http://forum.xda-developers.com/showthread.php?p=14448763#post14448763
shows both the pro clip and pics of the ram mount set up
thank everyone, i alrealy but another one from ebay, ($6.89)
http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=170579374411&ssPageName=ADME:L:OU:US:1123
If you can't use windscreen suction mount, than have you looked into Brodit holder mounted on ProClip? Keep in mind that most ProClips are designed for mobile phones, thus it may end up blocking instruments, vent, radio and so on as Xoom is much larger device.
Related
I've already got a screen suction arm, and holder for the Wizard. These are connected together through the standard 4 prong connection method.
If I get just a Brodit active holder (http://www.gpsforless.co.uk/product_details.php?id=5839), will it connect straight onto the existing sucker via the 4 prongs, or will I need to get another screen sucker? This page (http://www.gpsforless.co.uk/product_details.php?id=5860) seems to imply yes, but looking at the Brodit on it's own, I'm not sure.
Thanks in advance.
I don't know which sucker you have, but the Brodit cradles come with a plastic swivel plate on the back with four holes, which are used to screw it to the mount. There are no prongs involved. Whether you could still screw the Brodit to your suction mount I couldn't say...
I've found the Brodit-specific car mounts to be excellent, and if you go to www.dsldevelopments.co.uk you'll get excellent help and advice.
The screen attachment you describe sounds like a Herbert Rickter product, the second link in your post is for an Artemis holder that is supplied with a HR screen mount. The normal Brodit powered holder you link in the first post will not connect to a HR mount, it needs a Brodit Pro clip specific to your vehicle.
I have tried coupling the Brodit holder to a HR mount and it simply doesn't work, there are addaptors for securing a HR holder to a Brodit Pro Clip but not the other way around AFAIK - Mike
can anyone recommend me a cheap £15 or less suction mount car holder. I have looked at some on ebay and i am concered with the way some lock the HD2 in it may get damaged. thanks
suction mount
try cellphoneshop.net thats where I get mine the one with the photo frame for my tilt when I'm susing it as gps works great.
I know there a few threads about windshield mounts but none of them have what I'm looking for. I am looking for a windshield mount for my 2000 Ram 1500. I want it to mount on the BOTTOM on the windshield and come to the edge of the dash so it will need to be fairly long. I switch between the Seidio Innocase II surface and the Seidio 3500mah extended battery so I need something that will accommodate both of those. I also need it to switch between portrait and landscape. The Kensington windshield mount for the Iphone looks like it would be great but it doesn't look like it will allow me to use my extended battery.
What have you guys found that might work for what I need?
ive been using this...
Scosche IUHW7 Windshield Vent Mount Kit.
its inexpensive it sitcks... it turns and fits all kinds of stuff
I think I got it for 12 bucks at walmart
bacidath said:
ive been using this...
Scosche IUHW7 Windshield Vent Mount Kit.
its inexpensive it sitcks... it turns and fits all kinds of stuff
Click to expand...
Click to collapse
I might have to see if my local walmart has that. Thanks.
http://www.seidioonline.com/product-p/ck17hev4c04.htm
it is not long but with a little modification it will work.
it also holds thee innocaseII and the extended battery one.
will car dock the phone
Ram Mounts are good in trucks
http://www.ram-mount.com/
Mountek MT5000
I bought this after finding a thread about it on another forum. Best accessory ever. Extremely quick and easy to install, rotates portrait/landscape ... can't complain about anything. It uses your CD slot - you just put it in the opening and clamp it down.
It's actually started to become a problem because I'm constantly distracted while driving by my cellphone now. It's just right there up in my face, gorgeous and begging to be played with.
Can't post the link since I'm new here ... but you can Google it easily.
I like the Clingo mount so much, I am going to mod the Sedio Active Innocase I have to make it work with it (smooth.velvty doesn't stick to Clingo).
sanyi83 said:
Ram Mounts are good in trucks
http://www.ram-mount.com/
Click to expand...
Click to collapse
I've used Ram Mounts in my Jeep, good stuff!
Sent from my Desire HD using XDA App
I've got a cheap Arkon universal mount I use in my car. Works great with my ballistics case or naked.
Dunno how long it is but I have am ikd z car and its mounted to the bottom of my windshield and comes to the dash edge. Probably 6in or more. It was tricky too cause my car has a high rake angle and I wanted it mounted so it wouldn't show Tue mount at all in videos. It does block half the camera but it clamps hard enough that you can scoot it up and get the camera free.
Sent from my (insert daily ROM name here) Evo 4g
When in its case, mine fits in my Garmin windshield mount
Sent from my PC36100 using XDA App
Why not just get the seidio innotraveler? It will fit both the extended battery and innocase power their website. I have it and love it, it actually extends pretty far.
Sent from my hand with XDA Premium installed
Because the seidio one is $50! Thats crazy for a windshield mount. I found one at bestbuy yesterday its by rocketfish and made for the iphone but it works with our phone to. It doesn't come to the edge of the dash but it will work.
I am have been looking at car mounts for a while. I have seen there is one specifically for the HTC OneX (brodit) but it wont work with a case. There is an adjustable one that is marketed at the iphone 4s. Model number 511165. I was wondering as it is adjustabe if it will hold the ONEX
Thanks in advance
I use an exomount and it's wonderful
http://www.exogear.com/products-exomount-car-mount-holder.html
I have the exomount and previously had the brodit mount for my Desire HD. I find the Exomount is quite a bit less sturdy. The clip is good, but the arm and suction cup seem to let the phone shake a lot more over bumps.
If I didn't need to have a mount for my wife's phone I'd get another Brodit I think.
Jon
jontelfer said:
I have the exomount and previously had the brodit mount for my Desire HD. I find the Exomount is quite a bit less sturdy. The clip is good, but the arm and suction cup seem to let the phone shake a lot more over bumps.
If I didn't need to have a mount for my wife's phone I'd get another Brodit I think.
Jon
Click to expand...
Click to collapse
I find that it does shake a little, but never enough to stop me seeing the screen for nav / music etc
Definitely a good purchase.
Sent from my HTC One X using xda app-developers app
I was wondering if anyone knows if any of the GS3 or universal car docks fit on a 17mm ball mount. This is the same size that some Garmin mounts use, and was also used with the T-Mobile G2X. I have a couple nice car mounts that I can use if I find a corresponding dock.
check out this clip;
youtube.com/watch?v=J0tR65xRld4
I saw that one, but I don't want to use a case. I will check how it works with the Nuvi mount I have just in case it does work.
Just use this adapter w/ the mount of your choice:
http://www.ebay.com/itm/Arkon-SP-SB-AMPS-KIT-AMPS-Conversion-Kit-for-17mm-Arkon-and-Garmin-Ball-Mounts-/360435691483?pt=GPS_Holders_Mounts&hash=item53eba42fdb
You probably could also use this one:
http://www.theaccessoryking.com/arkon-accessories/mounting-solutions/sm511-ipm511/slim-grip-smartphone-sun-visor-mount.html
Now that is an interesting piece. I'll keep it in mind.
What I'm working with is I just recently bought another Pro-Clip set for my G2x and my new car. Since I have a G2x dock that fits on the 17mm ball mount I just bought another Nuvi mount from Pro-Clip. An adapter from the ball mount to something else will mean there's four pieces involved, and that's a bit much. I could return the new ball mount and get a GS3 mount from Pro-Clip but I'll have to eat the shipping on that.
vw671 said:
Just use this adapter w/ the mount of your choice:
http://www.ebay.com/itm/Arkon-SP-SB-AMPS-KIT-AMPS-Conversion-Kit-for-17mm-Arkon-and-Garmin-Ball-Mounts-/360435691483?pt=GPS_Holders_Mounts&hash=item53eba42fdb
You probably could also use this one:
http://www.theaccessoryking.com/arkon-accessories/mounting-solutions/sm511-ipm511/slim-grip-smartphone-sun-visor-mount.html
Click to expand...
Click to collapse
I didn't see that Arkon mount the first time I read your post. I'm ordering one now, thanks. I think it'll work nicely.
I got my Arkon mount yesterday and tried it out. I used one set of the extended legs and it holds the phone quite tightly and it mounts perfectly to my Garmin mounts. Thanks for the recommendation vw671.
KeithLM said:
I got my Arkon mount yesterday and tried it out. I used one set of the extended legs and it holds the phone quite tightly and it mounts perfectly to my Garmin mounts. Thanks for the recommendation vw671.
Click to expand...
Click to collapse
So does this part (I guess Arkon SM511 / IPM511) come with a 17mm socket ? which we can use with the garmin ball mounts ?
I understand you bought this part removed the clip and used it with your existing/old 17mm ball mount...
G
ghatothkach said:
So does this part (I guess Arkon SM511 / IPM511) come with a 17mm socket ? which we can use with the garmin ball mounts ?
I understand you bought this part removed the clip and used it with your existing/old 17mm ball mount...
G
Click to expand...
Click to collapse
I'll see if I can describe this accurately, you do have to be a bit careful. It seems that Arkon mounts are sold as a combination of 3 main pieces. There's the black back with the grips, the phone dock, that's part of every mount, some come with extended grips and some might not. For the S3 you need at least one pair of extended grips.
The second part is a bracket that slides into slots on back of the phone mount and has a 17mm socket on it. The third part is whatever mount your car needs, suction cup mount, air vent, or various other options. That has a 17mm ball on it.
I have seen some Arkon mounts for sale that appear to not have the socket portion. I bought a full kit with the suction cup mount.
This one shows a good view of the parts. On the suction cup mount is the clip that attaches to the back of the phone dock, that is needed. That one doesn't appear to come with the extended grips, so I wouldn't buy that one, but it does give you an idea of the parts.
I believe some Arkon mounts, which still use the same phone dock, forgo the ball mount and instead use a mount that attaches directly to the back of the phone dock.