Develop Bugs

Windows Phone 7 build 6176 Unlocked Emulator Image

Thankfully Microsoft didn't change anything in their 'protection' of the WP7 emulator image. Following the same steps as the previous build, I was able to unlock the new 'April Refresh' emulator image. It's largely the same but here's what I've noticed.
It seems a bit more buggy. I've noticed some odd screen drawing issues and even jaggy lines. Maybe it's my laptop?
Most apps seem slightly updated and more polished. A few quirks here and there.
Phone! Yup, you can see the dialer and it even fakes working.
Office is actually working. Looks like the apps shown in the videos they released.
v2... in my late night grogginess I missed the settings entries. This one should have all the settings unlocked now (including some new stuff that wasn't in the February build)
Unlocked Emulator bin v2 (multiupload) (fast mirror)
To launch it use the same process as before... "xde.exe WM70C1AprilUnlockedv2.bin"
Gizmodo posted a How to: Try Windows Phone 7 now. Although that was for the previous build, the same general steps apply. You'll just need to use the emulator bin above and the new Dev tools CTP - April Refresh. It will NOT work with the February release.
New long press menu?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The dialer, very basic
the 'call status' screen while in a call
Call log w/ active phone call

Is anyone can reupload to an non premium rapidshare account or mirror this link please.
F.

Yea we need a mirror, rapidshare sucks.

replaced rapidshare with multiupload. If you have a better suggestion let me know.

RustyGrom said:
replaced rapidshare with multiupload. If you have a better suggestion let me know.
Click to expand...
Click to collapse
Very thanks!
This is a Kernel x64??

Thanks mate, that was what I was looking for... I was able to add a gmail account, but no sync occured. Althought, it seems it can sync contacts, mail & calendar alltogether.
Trying to find a way to add a windows live ID to fully exploit the phone

Giving this a try just for fun =D.
I'm not getting any luck through the method that you mentioned to load up the BIN. Is there a way I can drop this file in a file, open up Visual Studio, and do an F5 to get the emulator going with the new image?

svetius said:
Giving this a try just for fun =D.
I'm not getting any luck through the method that you mentioned to load up the BIN. Is there a way I can drop this file in a file, open up Visual Studio, and do an F5 to get the emulator going with the new image?
Click to expand...
Click to collapse
Replace the original one in C:\Program Files\Microsoft SDKs\WindowsPhone\v7.0\Emulation\Images\
I haven't tried with this one but you couldn't debug with the previous version. It will launch it though.

Cannot run the ROM!
Hey guys,
When I try to run the ROM, it hangs at the "Loading...." stage and doesn't go further at all.
Do you have any idea what I might be doing wrongly?
The first version of ROM works perfectly though.
Thank you in advance

tecfield said:
Hey guys,
When I try to run the ROM, it hangs at the "Loading...." stage and doesn't go further at all.
Do you have any idea what I might be doing wrongly?
The first version of ROM works perfectly though.
Thank you in advance
Click to expand...
Click to collapse
It's not a ROM, if you're trying to flash it then don't.

Fantastica said:
It's not a ROM, if you're trying to flash it then don't.
Click to expand...
Click to collapse
Sorry, maybe I stated it in a wrong way. I meant opening it in my laptop using the emulator (xde).
Thanks

tecfield said:
Hey guys,
When I try to run the ROM, it hangs at the "Loading...." stage and doesn't go further at all.
Do you have any idea what I might be doing wrongly?
The first version of ROM works perfectly though.
Thank you in advance
Click to expand...
Click to collapse
Are you using the old XDE or the one released yesterday? I haven't tried it in the previous one but I'm guessing this is the cause.

I missed the registry entries for the settings in the original one. I updated the OP with the corrected file.

How to run?
I put the .bin in /.../microsoft xde directory and launch xde.exe and it doens't start :/

G-ThGraf said:
How to run?
I put the .bin in /.../microsoft xde directory and launch xde.exe and it doens't start :/
Click to expand...
Click to collapse
Same methods as the previous one. Several ways mentioned in that thread. http://forum.xda-developers.com/showthread.php?t=647138&page=43

RustyGrom said:
Same methods as the previous one. Several ways mentioned in that thread. http://forum.xda-developers.com/showthread.php?t=647138&page=43
Click to expand...
Click to collapse
Perhaps you should post that on the OP, to prevent these questions as last time it was unlocked...

Anyone have any ideas as to why the other apps (mail, facebook, etc) won't connect? It's gotta be some stupid registry entry like the rest of the "unlocking" or maybe just in a XML file somewhere. I'm fairly certain that they're using "SNService" for windows live and facebook status update type stuff and ActiveSync with some new plugins for Live mail, etc.

Quick Hosting Mirror
FYI, I am mirroring this on my 100mbit server here ---> http://www.freedomhosting.org.uk/files/xda-developers/wm70C1AprilUnlockedv2.7z

RustyGrom said:
Are you using the old XDE or the one released yesterday? I haven't tried it in the previous one but I'm guessing this is the cause.
Click to expand...
Click to collapse
this should also be on the first post, I made the same mistake of using the old one and It would stay on loading

Suggestion for Hosting Of Files
RustyGrom said:
replaced rapidshare with multiupload. If you have a better suggestion let me know.
Click to expand...
Click to collapse
Sorry for being fussy here, cause I've always been a user of Mediafire, it gets the job done easily, so I kind of like it. Multiupload usually causes Megaupload to reject my ip, saying I have an elevated number of requests, bla bla. Rapidshare works only after a number of tries with the different server under advanced options, and the only one i use is zShare, and it sucks cause it downloads at unstable speeds(i get a speed ranging from 30kbp/s and 100kbp/s) while my max speed is 300kbps! Well, thanks for reading. It's okay if you don't change, I can live on.
EDIT: I saw the 100mbits server website, thanks freedom! although this is still a suggestion for the hosting of your files. thanks

[APP] Check Fus 2.0 - The firmware checker. Make you are up to date!

Hi,
I have made a little tool to check if there's any new firmwares on the FUS servers. No more need of starting Kies to check for new firmware!
* Automatically checks for new firmware update! (Pro only)
* Notifies the user with signal and vibration if a new firmware is released. (Pro only)
* Finds your "Product Code" and "HIDSWVER"
* Use custom or presets of "Product Code" and "HIDSWVER"
* Send the output by email
* No ads (Pro Only)
* Check multiple regions automatically (Pro Only).
* Check multiple regions on one click (Pro Only).
* If you want me to add any presets to the list, just PM me and I'll add them.
If you have any suggestion on what to improve, just let me know!
You can find me on IRC in #project-voodoo on freenode if you want to chat.
You can find it on the market:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Direct market link: Check Fus Pro
Direct market link: Check Fus
Supported models:
Should work on any Samsung Device running Android
How to find correct Product Code, PDA, CSC and Phone.
From you device.
dial *#1234# and you will get pda, phone and csc.
Product code
*2767*4387264636#
Or
Product Code is connected to you region and/or carrier.
The easiest way is to take a look in the list on this page to find out which one you should have.
Let me then know your setup and I'll add it to the presets!
If you have the FUS-link the file looks like this
GT-I9000_I9000XXJPO_I9000OXAJPO_I9000XXJPP_I9000XXJPO_XX_XEU.zip.enc
Taken from SamsungFUSnews twitter
Model: GT-I9000 | Code: XEU | Version: I9000XXJPO/I9000OXAJPO/I9000XXJPP | Date: 29.10.2010 16:23 | Size: 168,81 MB | ID: 2695763114
ProductCode: GT-I9000HKDXEU
PDA: I9000XXJPO
PHONE: I9000XXJPP
CSC: I9000OXAJPO
Webbased checkFus
http://fus.nanzen.se/
Instruction on how to decrypt
.. can be found here
If you find this application useful, please consider a small donation at fus.nanzen.se to show you appreciation.

Many thanks! Super usefull!

Very usefull app but could you make it that it could read ProductCode, Phone, PDA, CSC from the phone (with ROOT permissions of course)?

yani2000 said:
Very usefull app but could you make it that it could read ProductCode, Phone, PDA, CSC from the phone (with ROOT permissions of course)?
Click to expand...
Click to collapse
Yes, I'm working on getting it to work, but I cant get the app to open the specified file. I get permission error. Any advice on how to read system files would help a lot! I have got SuperUser to grant root access.

Thank You for this. I must not anymore cheking new firmware with Kies or with login on Samfirmware. I was checking some product code with your apk , and i got really interesting result, but right.
Once more thanks
Best regards

yani2000 said:
Very usefull app but could you make it that it could read ProductCode, Phone, PDA, CSC from the phone (with ROOT permissions of course)?
Click to expand...
Click to collapse
Consider it done

Doesn't work on my i9000M (JH2). Just a black screen and that's all.

Doesn't work on SGS international with firmware jm9. Only black screen
Sent from my GT-I9000 using XDA App

at last now i don't have to fire up crappy kies to check for updates everytime... thanks a lot for the app..
and good support also, i just sent him my product code to be added to the list, and today it's there !!! thanks again !

sadly also doesn't work on my Sgs with JM8 and Voodoo, just got black screen...
greez

Samarkande said:
sadly also doesn't work on my Sgs with JM8 and Voodoo, just got black screen...
greez
Click to expand...
Click to collapse
The same...JM2+VOODOO...

Sorry for the problems!
I'll have a look at the black screen issue asap!
Just a question, have you rooted your device?
Can someone provide me with a logcat when starting the app?

LuffarJoh said:
Sorry for the problems!
I'll have a look at the black screen issue asap!
Just a question, have you rooted you device?
Click to expand...
Click to collapse
Yes and in the beggining it was asking for rooting permissions as usually..i said yes and after this..black screen..

Maybe app not working with strong modified FW (voodoo, etc.), only with stock FW ? Logical, fus server dont know what is voodoo modification, unknown FW. It is only my personal mind....
Regards

tonysac said:
Yes and in the beggining it was asking for rooting permissions as usually..i said yes and after this..black screen..
Click to expand...
Click to collapse
can you send me logcat when you are opening the application?
It's working on my JPA+hardcore kernel and also in a 1.6 emulator (not the auto-discover of product code though, because of not rooted).

LuffarJoh said:
can you send me logcat when you are opening the application?
It's working on my JPA+hardcore kernel and also in a 1.6 emulator (not the auto-discover of product code though, because of not rooted).
Click to expand...
Click to collapse
Explain pls what should i do....im too nube for this

miro666 said:
Maybe app not working with strong modified FW (voodoo, etc.), only with stock FW ? Logical, fus server dont know what is voodoo modification, unknown FW. It is only my personal mind....
Regards
Click to expand...
Click to collapse
It shouldnt be any difference, voodoo only modifies the kernel, and the app should start anyway, like any other application, its made to work on Android 1.6. Did it work prior the auto-discover of ProductCode and HIDSWVER?
tonysac said:
Explain pls what should i do....im too nube for this
Click to expand...
Click to collapse
The easiest way is to install SendLog from market, start Check Fus, when it have started and only shows black screen, exit the application and start SendLog and send the log to [email protected]
Thanks alot for your help!

ignore this post... wrong post.

LuffarJoh said:
It shouldnt be any difference, voodoo only modifies the kernel, and the app should start anyway, like any other application, its made to work on Android 1.6. Did it work prior the auto-discover of ProductCode and HIDSWVER?
The easiest way is to install SendLog from market, start Check Fus, when it have started and only shows black screen, exit the application and start SendLog and send the log to [email protected]
Thanks alot for your help!
Click to expand...
Click to collapse
Just send...hope it helps..

tonysac said:
Just send...hope it helps..
Click to expand...
Click to collapse
Thank you.
Unfortunately I cant see any error msg. Pls try this version instead. I have disabled root.

[APP] EasyWP7Updater - Easy CAB sender with a GUI (Open source, more devs needed)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EasyWP7Updater
Hello hackers!
Earlier today I started working on a project that should make updating Windows Phones via cabs easier. It's called EasyWP7Updater. Currently only manual cab sending is enabled, you can grab cabs from the official update list thread or if you have a custom rom, your rom author might offer customization cabs.
Downloads: https://github.com/jessenic/EasyWP7Updater/downloads
Bug Reports and Feature Requests: https://github.com/jessenic/EasyWP7Updater/issues
Source code: https://github.com/jessenic/EasyWP7Updater/tree/
Future homepage: http://jessenic.github.com/EasyWP7Updater/
Please test and report all bugs you might find either responding to this thread or by posting them on the Issues page on Github. Feature requests are also welcome.
In the future I'll allow ROM builders to add cabs in the app, stay tuned!

I'll definitely hop on board to help =)
Sent from my SGH-i917 using XDA Windows Phone 7 App

What the difference between xboxmod's cab sender and your?

will this app relock the phone when after updated?
xmod cab sender has this problem.

Really, @Magpir?!? That's just a matter of the CAB itself. It has nothing to do with the CAB sender. You'd get the same behavior if you update manually using any CAB sender, or if you update using the official Zune mechanism. It's already known what causes the re-lock (the "prevent relock" registry values that normally have the MS server where you phone checks its expected lock setting are restored by this update). It's also known how to avoid the problem (http://windowsphonehacker.com/artic...date_be_forewarned_possible_solution-06-28-12).
@jessenic: Nice project! Are you planning to include "fake an update just to take a backup" as a feature? It would be nice to narrow down the number of apps needed.

GoodDayToDie said:
Nice project! Are you planning to include "fake an update just to take a backup" as a feature? It would be nice to narrow down the number of apps needed.
Click to expand...
Click to collapse
Possible in the future, it's open source so you could start working on that too
Useless guy said:
What the difference between xboxmod's cab sender and your?
Click to expand...
Click to collapse
At the moment there is no big difference, but in the future my app will let you download cabs from ms servers in a simple way too.

Just tried it, and it works fantastic! Although, similar to other senders, this one should be easy and familiar to those who do not hack much. This makes it much simpler.
Since it's open source, are you allowing people to include it in other archives? I've downloaded and compressed the updates, added cab sender, then uploaded it for easy installation. Can I do that with this if I give you credit?
Thanks for your hard work. Great Job!

SuperSport said:
Just tried it, and it works fantastic! Although, similar to other senders, this one should be easy and familiar to those who do not hack much. This makes it much simpler.
Since it's open source, are you allowing people to include it in other archives? I've downloaded and compressed the updates, added cab sender, then uploaded it for easy installation. Can I do that with this if I give you credit?
Thanks for your hard work. Great Job!
Click to expand...
Click to collapse
We are adding automatic download for all OS versions, it detects the one on phone and shows latest versions and tells the user how to check which language packs are installed. That's the plan at least.

jessenic said:
We are adding automatic download for all OS versions, it detects the one on phone and shows latest versions and tells the user how to check which language packs are installed. That's the plan at least.
Click to expand...
Click to collapse
That's even better, thanks

Magpir said:
will this app relock the phone when after updated?
xmod cab sender has this problem.
Click to expand...
Click to collapse
It solely depends on how ROM packages are built. Have you noticed "Shadows" tab in DSM editor?

What the heck is this?
Maybe my brain is still asleep but how the hell do you execute this? There is no file to run it. All I'm seeing is uncompiled VB files.
!update!
Wow what a bad setup on the download page. So I guess I had to source download but still it's pretty confusing.

starxonline said:
Maybe my brain is still asleep but how the hell do you execute this? There is no file to run it. All I'm seeing is uncompiled VB files.
!update!
Wow what a bad setup on the download page. So I guess I had to source download but still it's pretty confusing.
Click to expand...
Click to collapse
Er....
Downloads: https://github.com/jessenic/EasyWP7Updater/downloads <--- going to this leads you to the actual download of the Zip file. How is this confusing?

The device has been updated to version 07.10.08773.03-00.00.00000.00-00.00.00000.00
Click to expand...
Click to collapse
sweet deal
worked well enough, and was easy to boot
just some quirky things with the play by play:
why have it denote the same % over and over? this entire process does not take all that long, waiting for the next percent doesn't take so long that we really need to know its still at 0%. I imagine its to let us know that things are still rolling, but seriously, if it sits for a minute or two and hasn't ticked over to the next percent, obviously something is wrong
where exactly did the backup I made end up?
the "installing updates..........." message didn't display until after the updates had actually been installed
and it finished with
ERROR:
Done!
Click to expand...
Click to collapse
seems like a success to me, not an error

emjlr3 said:
sweet deal
worked well enough, and was easy to boot
just some quirky things with the play by play:
why have it denote the same % over and over? this entire process does not take all that long, waiting for the next percent doesn't take so long that we really need to know its still at 0%. I imagine its to let us know that things are still rolling, but seriously, if it sits for a minute or two and hasn't ticked over to the next percent, obviously something is wrong
where exactly did the backup I made end up?
the "installing updates..........." message didn't display until after the updates had actually been installed
and it finished with
seems like a success to me, not an error
Click to expand...
Click to collapse
Yeah that part needs some fixing. Its already on my todo-list.
Edit: Oh and the backup is in the default Zune backup folder, you can restore it with Zune.

This is an awesome tool. Thank you very much for making the update process painless.
My one suggestion would be to add a progress bar so the user can how many more steps the software has to go through.
Thanks again.

I attached the download file as GitHub is deprecating it's downloads section.

This is a really useful tool!
This is a really useful tool!
I was able to add a new language to my locked Samsung Focus SGH-i917 v.1.4.
I subsequently updated it to 8862 using SevenEighter without any hiccups.
Konker

[GUIDE] Deploying Astoria Packages Manually To W10M

MOD EDIT: I'm closing this thread for now until the possibility opens back up for us to get Astoria running again. Too many posts cluttering away
Hi everyone,
After several days of sniffing Windows Update traffic and lots of downgrading
, I've found a way to get Astoria installed and working on the HTC One M8 for Windows. that's right..
In THEORY, this should work for all devices that aren't supported by Astoria project.
The reason for this: In the process to go straight to 10536 directly from wp8.1,
the needed aow.wim file got pulled by MS (for security reasons i suppose
and i have no idea when or if they will bring it back).
Requirements:
-installed WDK,WPAK,WPDK (containing iutool.exe) get it there: http://forum.xda-developers.com/win...ools-wdk-wpak-wpdk-cabs-building-wp8-t3183972
-w10m build 10536 installed on phone
-usb connection to pc
-astoria cabs
Here are the direct download links of the needed astoria cabs:
10166 (canonical)
Code:
http://wp.ds.download.windowsupdate.com/d/msdownload/update/software/dflt/2015/07/microsoft.ms_projecta.mainos.spkg_9dec9dcfe0f22750e3737e9a484e7a60e193303c.cab
10512 (diff)
Code:
http://wp.ds.download.windowsupdate.com/d/msdownload/update/software/dflt/2015/08/microsoft.ms_projecta.mainos.cbsu_c36c1e67bd04b694a01b65efeb70213ff439be76.cab
10514 (diff)
Code:
http://wp.ds.download.windowsupdate.com/d/msdownload/update/software/dflt/2015/08/microsoft.ms_projecta.mainos.cbsu_7ec3fb51b79d57de88e6adaa0e27800106ecedd8.cab
10536 (diff)
Code:
http://wp.ds.download.windowsupdate.com/d/msdownload/update/software/dflt/2015/09/microsoft.ms_projecta.mainos.cbsu_f0ea237eea0f74372a7eb6745585a06a4ee3feb9.cab
Instructions:
-Go to iutool path in cmd with admin rights (usually c:\program files (x86)\windows phone kits\8.1\tools\bin\i386)
-Type "iutool -l" to see if the device is connected and recognized.
1 put only the first cab (10166) to a new folder like c:\cabs
2 then type: iutool -v -p c:\cabs
3 it should push the cab to the device and start the update.
4 there might be a error 0x8024a110 but it should work.
5 the device will automatically reboot very soon and go to flash mode (gears) to apply the cab.
6 then there will be the usual "data migration".
Repeat steps 1-6 with all the cabs in correct order one by one.
Astoria should now be installed and working.
There are already guides on xda about getting apk's installed via wconnect.
Thanks to @snickler for helping me with the method to obtain the cabs even if ms tries to prevent it.
Thanks to XDA Dev Team for daily chats and support.
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

reserved post

Cool, so easy than msft way
Thanks ? ?

@System322 @mavvie
@Ranomez @apinkshidae is that what you guys were trying to do ? hope it helps

Bnjalal said:
@System322 @mavvie
@Ranomez @apinkshidae is that what you guys were trying to do ? hope it helps
Click to expand...
Click to collapse
Well you sir are a genius, lol, thank you very much, will try it and report if it also works for my device (which has 512MB RAM only).

Anyone could upload iutool.exe?

augustinionut said:
Anyone could upload iutool.exe?
Click to expand...
Click to collapse
You need to install the whole package, just iutool won't work, take it from the xda thread linked in the OP and install it, it's kinda big but the download speeds are good (if you do have good internet speeds).

I have a 6 GB limited plan. I will download at work

I can't seem to be able to flash the second cab, the first one gave the error but flashed but the second one gives the error and nothing happens.
EDIT: @Bnjalal do we need to keep the first cab in the folder, as far as I could understand from your instructions the answer would be no but I can't flash the second one?
Or do I need to do anything else?

@Ranomez my good Sir, I am not the op of this thread, I was just reading the threads trying to figure out why my 'supported device' getting error 14 and came through your posts and struggles and wanted to contribute to the good community. I am really sorry that I am not as experienced as the others here at XDA and thought that mentioning you here was the least I can do to offer help or support. But for the time being, I'm sure the OP will reply to you and offer support as he was the one who made the find

Bnjalal said:
@Ranomez my good Sir, I am not the op of this thread, I was just reading the threads trying to figure out why my 'supported device' getting error 14 and came through your posts and struggles and wanted to contribute to the good community. I am really sorry that I am not as experienced as the others here at XDA and thought that mentioning you here was the least I can do to offer help or support. But for the time being, I'm sure the OP will reply to you and offer support as he was the one who made the find
Click to expand...
Click to collapse
Oops, excuse me, I don't even know how I managed to confuse you for the OP, lol, sorry again.
EDIT: Meanwhile I answered my own question: DON'T keep the first cab in the folder, my device seems to be stuck in the flashing screen.

@Ranomez no worries pal, wish you all the best

An alternate way instead of putting them in one folder, you can call the individual cab directly. So instead of c:\cabs, you would put c:\cabs\blahblah.cab and it will stage that particular cab.
Throwing them one by one in a directory is an easier way to keep track of your progress.

Except the initial cab file the others just won't flash, might be cause I already installed the astoria files in the past with the change model trick (but it never worked) but I doubt it, probably it's because the device has 512MB RAM and astoria does a hardware check for that.
Anyway just to be sure I will downgrade to WP8.1 and take the update again.

BTW why not all cabs at a time ?
No need to DLOAD 6GB Stuff.
i836 is enough for everything, if any one would share. Just below than 10 MB

djamol said:
BTW why not all cabs at a time ?
No need to DLOAD 6GB Stuff.
i836 is enough for everything, if any one would share. Just below than 10 MB
Click to expand...
Click to collapse
Because the cabs won't install all at once as some are diffs. Each cab is a corresponding package version. It checks for version dependencies and if there's a clash or if you're trying to install a cab that is lower or higher than the dependency, it won't let you do it.

@snickler oh yeah, got it, thanks mate !
Btw I saw you after a long time, where was hidden you

I've been around .

Confirmed 100% sure that this doesn't work on 512MB devices...only the first file can be flashed, the others can't.
Which means astoria does do some strange device hardware check or something like that.

Bnjalal said:
@System322 @mavvie
@Ranomez @apinkshidae is that what you guys were trying to do ? hope it helps
Click to expand...
Click to collapse
Yes, exactly this. My 920 is still choking on trying to go to 10536 from 10166. Guess the servers are a bit bogged down with the 8.1 Update 2.
I'm certainly going to try this one.

How to sideload BP on my Galaxy Watch Active 2?

Hello guys,
well this is my first thread. Actually I tried installing the BP app on my Galaxy watch active 2 following every instruction from this thread.
I was able to connect to my using the Tizen Studio.
But while installing bp.tpk using the command line, I got this particular error.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can anyone please help me with the same. I'm from India if in any case that is required.
EDIT: Not able to upload the image. For reference I got the error saying "error message: :sideloading error".

abhsatvat said:
Hello guys,
well this is my first thread. Actually I tried installing the BP app on my Galaxy watch active 2 following every instruction from this thread.
I was able to connect to my using the Tizen Studio.
But while installing bp.tpk using the command line, I got this particular error.
Can anyone please help me with the same. I'm from India if in any case that is required.
EDIT: Not able to upload the image. For reference I got the error saying "error message: :sideloading error".
Click to expand...
Click to collapse
Refer the video link it will help u .....but remember dont miss any step..

amitdon said:
Refer the video link it will help u .....but remember dont miss any step..
Click to expand...
Click to collapse
What do you understand by when I say, I tried every instruction but still got the sideload error.
Please don't comment unless you actually know the solution.
Thanks

@abhsatvat
Please with sugar on the top...
Yes you are new here... Welcome.
But you are really REALLY sure you really tried all and understand all inside this Video?
Maybe lets start from Scratch.
A
Your Model Name...
Example:
Code:
SM-R820
B
Your Firmware Version...
Type for instance this Code:
Code:
*#1234#
Write all you see here...
Best Regards

adfree said:
@abhsatvat
Please with sugar on the top...
Yes you are new here... Welcome.
But you are really REALLY sure you really tried all and understand all inside this Video?
Maybe lets start from Scratch.
A
Your Model Name...
Example:
Code:
SM-R820
B
Your Firmware Version...
Type for instance this Code:
Code:
*#1234#
Write all you see here...
Best Regards
Click to expand...
Click to collapse
Hi adfree,
BIG FAN.
MODEL NUMBER: SM-R820
Firmware Version: R820XXUIBTC7
And yes i tried every step mentioned in the thread as well as the video. While I tried doing with the same with the listed sdb, tpk, and apk also the latest Tizen studio. It asked me update it. So later in the same thread, "index of sdb files" that were mentioned. I downloaded the latest version dated April 6(sdb_4.2.12_windows-64).
Now I tried with the updated version, it did execute but it gave the "sideload error".
So i think this sums up that I have followed every step on my watch. following are the same.
1. Turn the "debugging" on.
2. Select WiFi as "always on" and connected to the same WiFi network as of the Laptop.
3. Noted down the IP address.
4. Open Tizen and remote connect to the watch. (check the RSA key prompt on watch)
5. Unzip the downloaded folders and move the bp.tpk to tools "sub-folder" for sdb.
6. Now run the "aniscon".
7. In command line, type "sdb install bp.tpk".
These were the steps I followed. Kindly help me if I have missed any step.

R820XXUIBTC7
Click to expand...
Click to collapse
Tiny correction.
Code:
R820XXU1BTC7
IMHO the only known CSC / Salescode... is INU... India.
https://doc.samsungmobile.com/SM-R820/INU/doc.html
Maybe somebody from India could please confirm... BTC7 is working for this procedure...
Feel free also try the new "public" released TPK for BP... here:
https://forum.xda-developers.com/showpost.php?p=82859231&postcount=719
It is inside system.7z
Please try and confirm if still Sideload Error...
Best Regards

Is it possible to install this app on SM-R805F?

renton82 said:
Is it possible to install this app on SM-R805F?
Click to expand...
Click to collapse
Hi @renton82
Many have tried sideloading and it succeeds but while you try to calibrate it, it is stuck at 0%.
So I don't think SM-R805F supports BP measurement.
Regards

adfree said:
Tiny correction.
Code:
R820XXU1BTC7
IMHO the only known CSC / Salescode... is INU... India.
https://doc.samsungmobile.com/SM-R820/INU/doc.html
Maybe somebody from India could please confirm... BTC7 is working for this procedure...
Feel free also try the new "public" released TPK for BP... here:
https://forum.xda-developers.com/showpost.php?p=82859231&postcount=719
It is inside system.7z
Please try and confirm if still Sideload Error...
Best Regards
Click to expand...
Click to collapse
Hi @adfree
I got it working. tried with the old sdb and voila, it worked.
Thanks for the support man. Cheers
Regards.

Always use OLD SDB, with the new one you have Sideload error.
Cheers

Erden said:
Always use OLD SDB, with the new one you have Sideload error.
Cheers
Click to expand...
Click to collapse
Hi @Erden
Yes I got it now. I was getting that error. Anyway thanks.
Regards.

From Tizen studio, I am unable to find my watch from scan. even entering the IP. how do i check the port no.?
sorry newbie here

stanleyj said:
From Tizen studio, I am unable to find my watch from scan. even entering the IP. how do i check the port no.?
sorry newbie here
Click to expand...
Click to collapse
Hello @stanleyj
No problem buddy, I'm a newbie too. Lemme help with that but before that can you please tell your watch's model number?
You can find that under Settings >> About.

Oh ok thanks a lot
SB-R820

stanleyj said:
Oh ok thanks a lot
SB-R820
Click to expand...
Click to collapse
Ok great, go to Tizen's Package Manager and follow the steps:
1. Under Main SDK tab, install the 5.5 wearable package.
2. Go to the Extension tab, install Samsung wearable extension.
Let it complete and then try the way you were trying earlier to scan for the device using remote device manager from the drop-down. Hopefully you will get it working this time.
Once it shows up, enable the Connect toggle.
Then run the "aniscon" command line and type "sdb install bp.tpk". (make sure you are using the old sdb only)
For better assistance, follow this video.
I hope it will work.

Brilliant thanks!! I will try that!! Much appreciated!!

abhsatvat said:
Ok great, go to Tizen's Package Manager and follow the steps:
1. Under Main SDK tab, install the 5.5 wearable package.
2. Go to the Extension tab, install Samsung wearable extension.
Let it complete and then try the way you were trying earlier to scan for the device using remote device manager from the drop-down. Hopefully you will get it working this time.
Once it shows up, enable the Connect toggle.
Then run the "aniscon" command line and type "sdb install bp.tpk". (make sure you are using the old sdb only)
For better assistance, follow this video.
I hope it will work.
Click to expand...
Click to collapse
Do i need a samsung phone for this as well or can i do this with any android phone? (Mate 20 Pro atm)

TeeKay35 said:
Do i need a samsung phone for this as well or can i do this with any android phone? (Mate 20 Pro atm)
Click to expand...
Click to collapse
Hi @TeeKay35
As per i know, using a Samsung smartphone will hardly make any difference, just download the apk on your phone and install it, later connect it with your watch. I think it should run as usual.
Please right back if any problem occurs.

Anyone be able to help me? I installed BP to my fathers active watch 2 and S20 with no problems. He was using it god awhile then accedently deleted it. Now try to re install same as the guide and it won’t install to the watch anymore. Can anyone help me please

grk747 said:
Anyone be able to help me? I installed BP to my fathers active watch 2 and S20 with no problems. He was using it god awhile then accedently deleted it. Now try to re install same as the guide and it won’t install to the watch anymore. Can anyone help me please
Click to expand...
Click to collapse
Are you sure you followed all the steps correctly?
Also, can you tell me are you based in USA, right now?