Hello guys,
well this is my first thread. Actually I tried installing the BP app on my Galaxy watch active 2 following every instruction from this thread.
I was able to connect to my using the Tizen Studio.
But while installing bp.tpk using the command line, I got this particular error.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can anyone please help me with the same. I'm from India if in any case that is required.
EDIT: Not able to upload the image. For reference I got the error saying "error message: :sideloading error".
abhsatvat said:
Hello guys,
well this is my first thread. Actually I tried installing the BP app on my Galaxy watch active 2 following every instruction from this thread.
I was able to connect to my using the Tizen Studio.
But while installing bp.tpk using the command line, I got this particular error.
Can anyone please help me with the same. I'm from India if in any case that is required.
EDIT: Not able to upload the image. For reference I got the error saying "error message: :sideloading error".
Click to expand...
Click to collapse
Refer the video link it will help u .....but remember dont miss any step..
amitdon said:
Refer the video link it will help u .....but remember dont miss any step..
Click to expand...
Click to collapse
What do you understand by when I say, I tried every instruction but still got the sideload error.
Please don't comment unless you actually know the solution.
Thanks
@abhsatvat
Please with sugar on the top...
Yes you are new here... Welcome.
But you are really REALLY sure you really tried all and understand all inside this Video?
Maybe lets start from Scratch.
A
Your Model Name...
Example:
Code:
SM-R820
B
Your Firmware Version...
Type for instance this Code:
Code:
*#1234#
Write all you see here...
Best Regards
adfree said:
@abhsatvat
Please with sugar on the top...
Yes you are new here... Welcome.
But you are really REALLY sure you really tried all and understand all inside this Video?
Maybe lets start from Scratch.
A
Your Model Name...
Example:
Code:
SM-R820
B
Your Firmware Version...
Type for instance this Code:
Code:
*#1234#
Write all you see here...
Best Regards
Click to expand...
Click to collapse
Hi adfree,
BIG FAN.
MODEL NUMBER: SM-R820
Firmware Version: R820XXUIBTC7
And yes i tried every step mentioned in the thread as well as the video. While I tried doing with the same with the listed sdb, tpk, and apk also the latest Tizen studio. It asked me update it. So later in the same thread, "index of sdb files" that were mentioned. I downloaded the latest version dated April 6(sdb_4.2.12_windows-64).
Now I tried with the updated version, it did execute but it gave the "sideload error".
So i think this sums up that I have followed every step on my watch. following are the same.
1. Turn the "debugging" on.
2. Select WiFi as "always on" and connected to the same WiFi network as of the Laptop.
3. Noted down the IP address.
4. Open Tizen and remote connect to the watch. (check the RSA key prompt on watch)
5. Unzip the downloaded folders and move the bp.tpk to tools "sub-folder" for sdb.
6. Now run the "aniscon".
7. In command line, type "sdb install bp.tpk".
These were the steps I followed. Kindly help me if I have missed any step.
R820XXUIBTC7
Click to expand...
Click to collapse
Tiny correction.
Code:
R820XXU1BTC7
IMHO the only known CSC / Salescode... is INU... India.
https://doc.samsungmobile.com/SM-R820/INU/doc.html
Maybe somebody from India could please confirm... BTC7 is working for this procedure...
Feel free also try the new "public" released TPK for BP... here:
https://forum.xda-developers.com/showpost.php?p=82859231&postcount=719
It is inside system.7z
Please try and confirm if still Sideload Error...
Best Regards
Is it possible to install this app on SM-R805F?
renton82 said:
Is it possible to install this app on SM-R805F?
Click to expand...
Click to collapse
Hi @renton82
Many have tried sideloading and it succeeds but while you try to calibrate it, it is stuck at 0%.
So I don't think SM-R805F supports BP measurement.
Regards
adfree said:
Tiny correction.
Code:
R820XXU1BTC7
IMHO the only known CSC / Salescode... is INU... India.
https://doc.samsungmobile.com/SM-R820/INU/doc.html
Maybe somebody from India could please confirm... BTC7 is working for this procedure...
Feel free also try the new "public" released TPK for BP... here:
https://forum.xda-developers.com/showpost.php?p=82859231&postcount=719
It is inside system.7z
Please try and confirm if still Sideload Error...
Best Regards
Click to expand...
Click to collapse
Hi @adfree
I got it working. tried with the old sdb and voila, it worked.
Thanks for the support man. Cheers
Regards.
Always use OLD SDB, with the new one you have Sideload error.
Cheers
Erden said:
Always use OLD SDB, with the new one you have Sideload error.
Cheers
Click to expand...
Click to collapse
Hi @Erden
Yes I got it now. I was getting that error. Anyway thanks.
Regards.
From Tizen studio, I am unable to find my watch from scan. even entering the IP. how do i check the port no.?
sorry newbie here
stanleyj said:
From Tizen studio, I am unable to find my watch from scan. even entering the IP. how do i check the port no.?
sorry newbie here
Click to expand...
Click to collapse
Hello @stanleyj
No problem buddy, I'm a newbie too. Lemme help with that but before that can you please tell your watch's model number?
You can find that under Settings >> About.
Oh ok thanks a lot
SB-R820
stanleyj said:
Oh ok thanks a lot
SB-R820
Click to expand...
Click to collapse
Ok great, go to Tizen's Package Manager and follow the steps:
1. Under Main SDK tab, install the 5.5 wearable package.
2. Go to the Extension tab, install Samsung wearable extension.
Let it complete and then try the way you were trying earlier to scan for the device using remote device manager from the drop-down. Hopefully you will get it working this time.
Once it shows up, enable the Connect toggle.
Then run the "aniscon" command line and type "sdb install bp.tpk". (make sure you are using the old sdb only)
For better assistance, follow this video.
I hope it will work.
Brilliant thanks!! I will try that!! Much appreciated!!
abhsatvat said:
Ok great, go to Tizen's Package Manager and follow the steps:
1. Under Main SDK tab, install the 5.5 wearable package.
2. Go to the Extension tab, install Samsung wearable extension.
Let it complete and then try the way you were trying earlier to scan for the device using remote device manager from the drop-down. Hopefully you will get it working this time.
Once it shows up, enable the Connect toggle.
Then run the "aniscon" command line and type "sdb install bp.tpk". (make sure you are using the old sdb only)
For better assistance, follow this video.
I hope it will work.
Click to expand...
Click to collapse
Do i need a samsung phone for this as well or can i do this with any android phone? (Mate 20 Pro atm)
TeeKay35 said:
Do i need a samsung phone for this as well or can i do this with any android phone? (Mate 20 Pro atm)
Click to expand...
Click to collapse
Hi @TeeKay35
As per i know, using a Samsung smartphone will hardly make any difference, just download the apk on your phone and install it, later connect it with your watch. I think it should run as usual.
Please right back if any problem occurs.
Anyone be able to help me? I installed BP to my fathers active watch 2 and S20 with no problems. He was using it god awhile then accedently deleted it. Now try to re install same as the guide and it won’t install to the watch anymore. Can anyone help me please
grk747 said:
Anyone be able to help me? I installed BP to my fathers active watch 2 and S20 with no problems. He was using it god awhile then accedently deleted it. Now try to re install same as the guide and it won’t install to the watch anymore. Can anyone help me please
Click to expand...
Click to collapse
Are you sure you followed all the steps correctly?
Also, can you tell me are you based in USA, right now?
Related
I've written PHP script that pretends Kies application and asks Samsung's server about updates for given device. Reason for that was simple: I wanted to know about official Froyo release without manually checking it with Kies with registers hacks.
Download:
http://files.zajec.net/kies.updates.php.txt
Usage:
php kies.updates.php.txt
Requirements:
php with curl extension
Checking for other countries and devices:
Check last 4 lines in script and modify them. Syntax is simple:
getUpdateInfo('ANY-NAME', 'ProductCode', 'HIDSWVER');
Example:
Code:
Europe Countries / GT-I9000HKDXEU / I9000XXJF3/I9000OXAJF3/I9000XXJF3/I9000XXJF3
---------------------------------------------------------------------------------
LATEST_FW_VERSION I9000XXJM1/I9000OXAJF3/I9000XXJM1/I9000XXJM1
BINARY_URI http://fus.samsungmobile.com/Phone_Binary/9/GT-I9000_I9000XXJM1_I9000OXAJM1_I9000XXJM1_I9000XXJM1_XX_XEU.zip.enc
LAST_MODIFIED 10/08/21
CURRENT_DISPLAYVERSION I9000XXJF3/I9000OXAJF3/I9000XXJF3/I9000XXJF3
LATEST_DISPLAYVERSION I9000XXJM1/I9000OXAJM1/I9000XXJM1/I9000XXJM1
great, congrat. at last something useful appears here
woooooohoooooooo!!!!! thank you!
no more connecting the phone to the computer just to see if there is any new legit ROM release
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
moving topic to correct section
I inserted one row into line 126:
echo "<pre>";
for correct browser viewing
Nice app,
I someone doesn't have a php interpreter near at hand try using this http://www.coderun.com/ide/
Can someone help a complete noob on how to run this script? What tools/app do I need to get going?
Thanks!
Uploaded to my server but I am not sure what to change for unbranded UK XEU ?
Never mind. I think I got it.
Just a thought. Is there any way to add an RSS feed or something to this so it notifies me if anything changes. Instant notice of FROYO Yeah baby.
almaalma74 said:
I inserted one row into line 126:
echo "<pre>";
for correct browser viewing
Click to expand...
Click to collapse
Good idea, I've fixed script to generate nice HTML when not run from command line. Updated version can be found at the same place.
Tehpriest said:
Just a thought. Is there any way to add an RSS feed or something to this so it notifies me if anything changes. Instant notice of FROYO Yeah baby.
Click to expand...
Click to collapse
Should be possible, maybe will do that if I find some free time
jpaik said:
Can someone help a complete noob on how to run this script? What tools/app do I need to get going?
Thanks!
Click to expand...
Click to collapse
Sure enough.
1. Click on the link provided by Zajec, copy the php code ( CTRL+A manner).
2. Open the following link http://www.coderun.com/ide/
3. Click 'New'
4. Click 'PHP WebSite'
5. Click 'OK'
6. Click 'Run'
7. Wait some time for the window to load
8 Voila
Cheers
kapollo said:
Sure enough.
1. Click on the link provided by Zajec, copy the php code ( CTRL+A manner).
2. Open the following link http://www.coderun.com/ide/
3. Click 'New'
4. Click 'PHP WebSite'
5. Click 'OK'
6. Click 'Run'
7. Wait some time for the window to load
8 Voila
Cheers
Click to expand...
Click to collapse
A nother noob here, When you create a new PHP Website where do you copy the script into and do you have to remove the Hello World! script first?
chrisjwild said:
A nother noob here, When you create a new PHP Website where do you copy the script into and do you have to remove the Hello World! script first?
Click to expand...
Click to collapse
Sure you do.
kapollo, thank you!!
I'm not understanding one thing: where do I paste the php code?
Thanks.
Kies has been updated in order for the script to work you need to change the version of the Kies in the query inside the php code:
line 59: from 1.5.3.10093.82 to 1.5.3.10103.100
still no Froyo....
jpaik said:
kapollo, thank you!!
I'm not understanding one thing: where do I paste the php code?
Thanks.
Click to expand...
Click to collapse
When you click on the PHP Website, a new project will be created, and it will contain hello world, delete everything from that window, and paste Zajecs code.
Note this is a web app you do everything inside the web browser.
hope this helps.
cheers
Hello,
this morning I got the message that there is "No firmware info with the given data". Yesterday it worked perfektly. The data I'm using:
getUpdateInfo('Europe Countries', 'GT-I9000HKDDBT', 'I9000XXJF3/I9000OXAJF3/I9000XXJF3/I9000XXJF3');
What could be the reason?
Maybe a fimware update?
memamu said:
Hello,
this morning I got the message that there is "No firmware info with the given data". Yesterday it worked perfektly. The data I'm using:
getUpdateInfo('Europe Countries', 'GT-I9000HKDDBT', 'I9000XXJF3/I9000OXAJF3/I9000XXJF3/I9000XXJF3');
What could be the reason?
Click to expand...
Click to collapse
You haven't updated Kies version number, perhaps?
memamu said:
this morning I got the message that there is "No firmware info with the given data". Yesterday it worked perfektly. The data I'm using:
getUpdateInfo('Europe Countries', 'GT-I9000HKDDBT', 'I9000XXJF3/I9000OXAJF3/I9000XXJF3/I9000XXJF3');
What could be the reason?
Click to expand...
Click to collapse
Kies was updated and Samsung changed protocol which Kies uses to check for firmware. That way my PHP script uses outdated protocol which does not work anymore. Will have to update it when I get my hands on new Kies.
Similar issue can be noticed when using old Kies. It was reported in: http://forum.xda-developers.com/showthread.php?p=9013623
OK, so there was not any real change in protocol. Samsung just banned old Kies versions. File available under http://files.zajec.net/kies.updates.php.txt works again.
It shows "I9000XXJPO/I9000OXAJPO/I9000XXJPP/I9000XXJPO" for Europe Countries,
"I9000XWJM2/I9000OXXJM1/I9000XXJM1/I9000XWJM2" for Poland (no branding).
Not sure what do to do now... Wait for Polish release or use version for Europe Countires?
Great work!
Do you think fus site is publishing the .enc files passkey too, somewhere within its webservice ?
I guess it should be reasonable, as Kies shouldn't know anyone at first...
Zajec5 said:
It shows "I9000XXJPO/I9000OXAJPO/I9000XXJPP/I9000XXJPO" for Europe Countries,
"I9000XWJM2/I9000OXXJM1/I9000XXJM1/I9000XWJM2" for Poland (no branding).
Not sure what do to do now... Wait for Polish release or use version for Europe Countires?
Click to expand...
Click to collapse
Does anyone know a working sequence for any eclair update for ITV (Italy - no branding) ?? Froyo not yet, but I can't manage to get either a 2.1 upgrade for such csc code.
Many thanks for any hint
Hi,
I have made a little tool to check if there's any new firmwares on the FUS servers. No more need of starting Kies to check for new firmware!
* Automatically checks for new firmware update! (Pro only)
* Notifies the user with signal and vibration if a new firmware is released. (Pro only)
* Finds your "Product Code" and "HIDSWVER"
* Use custom or presets of "Product Code" and "HIDSWVER"
* Send the output by email
* No ads (Pro Only)
* Check multiple regions automatically (Pro Only).
* Check multiple regions on one click (Pro Only).
* If you want me to add any presets to the list, just PM me and I'll add them.
If you have any suggestion on what to improve, just let me know!
You can find me on IRC in #project-voodoo on freenode if you want to chat.
You can find it on the market:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Direct market link: Check Fus Pro
Direct market link: Check Fus
Supported models:
Should work on any Samsung Device running Android
How to find correct Product Code, PDA, CSC and Phone.
From you device.
dial *#1234# and you will get pda, phone and csc.
Product code
*2767*4387264636#
Or
Product Code is connected to you region and/or carrier.
The easiest way is to take a look in the list on this page to find out which one you should have.
Let me then know your setup and I'll add it to the presets!
If you have the FUS-link the file looks like this
GT-I9000_I9000XXJPO_I9000OXAJPO_I9000XXJPP_I9000XXJPO_XX_XEU.zip.enc
Taken from SamsungFUSnews twitter
Model: GT-I9000 | Code: XEU | Version: I9000XXJPO/I9000OXAJPO/I9000XXJPP | Date: 29.10.2010 16:23 | Size: 168,81 MB | ID: 2695763114
ProductCode: GT-I9000HKDXEU
PDA: I9000XXJPO
PHONE: I9000XXJPP
CSC: I9000OXAJPO
Webbased checkFus
http://fus.nanzen.se/
Instruction on how to decrypt
.. can be found here
If you find this application useful, please consider a small donation at fus.nanzen.se to show you appreciation.
Many thanks! Super usefull!
Very usefull app but could you make it that it could read ProductCode, Phone, PDA, CSC from the phone (with ROOT permissions of course)?
yani2000 said:
Very usefull app but could you make it that it could read ProductCode, Phone, PDA, CSC from the phone (with ROOT permissions of course)?
Click to expand...
Click to collapse
Yes, I'm working on getting it to work, but I cant get the app to open the specified file. I get permission error. Any advice on how to read system files would help a lot! I have got SuperUser to grant root access.
Thank You for this. I must not anymore cheking new firmware with Kies or with login on Samfirmware. I was checking some product code with your apk , and i got really interesting result, but right.
Once more thanks
Best regards
yani2000 said:
Very usefull app but could you make it that it could read ProductCode, Phone, PDA, CSC from the phone (with ROOT permissions of course)?
Click to expand...
Click to collapse
Consider it done
Doesn't work on my i9000M (JH2). Just a black screen and that's all.
Doesn't work on SGS international with firmware jm9. Only black screen
Sent from my GT-I9000 using XDA App
at last now i don't have to fire up crappy kies to check for updates everytime... thanks a lot for the app..
and good support also, i just sent him my product code to be added to the list, and today it's there !!! thanks again !
sadly also doesn't work on my Sgs with JM8 and Voodoo, just got black screen...
greez
Samarkande said:
sadly also doesn't work on my Sgs with JM8 and Voodoo, just got black screen...
greez
Click to expand...
Click to collapse
The same...JM2+VOODOO...
Sorry for the problems!
I'll have a look at the black screen issue asap!
Just a question, have you rooted your device?
Can someone provide me with a logcat when starting the app?
LuffarJoh said:
Sorry for the problems!
I'll have a look at the black screen issue asap!
Just a question, have you rooted you device?
Click to expand...
Click to collapse
Yes and in the beggining it was asking for rooting permissions as usually..i said yes and after this..black screen..
Maybe app not working with strong modified FW (voodoo, etc.), only with stock FW ? Logical, fus server dont know what is voodoo modification, unknown FW. It is only my personal mind....
Regards
tonysac said:
Yes and in the beggining it was asking for rooting permissions as usually..i said yes and after this..black screen..
Click to expand...
Click to collapse
can you send me logcat when you are opening the application?
It's working on my JPA+hardcore kernel and also in a 1.6 emulator (not the auto-discover of product code though, because of not rooted).
LuffarJoh said:
can you send me logcat when you are opening the application?
It's working on my JPA+hardcore kernel and also in a 1.6 emulator (not the auto-discover of product code though, because of not rooted).
Click to expand...
Click to collapse
Explain pls what should i do....im too nube for this
miro666 said:
Maybe app not working with strong modified FW (voodoo, etc.), only with stock FW ? Logical, fus server dont know what is voodoo modification, unknown FW. It is only my personal mind....
Regards
Click to expand...
Click to collapse
It shouldnt be any difference, voodoo only modifies the kernel, and the app should start anyway, like any other application, its made to work on Android 1.6. Did it work prior the auto-discover of ProductCode and HIDSWVER?
tonysac said:
Explain pls what should i do....im too nube for this
Click to expand...
Click to collapse
The easiest way is to install SendLog from market, start Check Fus, when it have started and only shows black screen, exit the application and start SendLog and send the log to [email protected]
Thanks alot for your help!
ignore this post... wrong post.
LuffarJoh said:
It shouldnt be any difference, voodoo only modifies the kernel, and the app should start anyway, like any other application, its made to work on Android 1.6. Did it work prior the auto-discover of ProductCode and HIDSWVER?
The easiest way is to install SendLog from market, start Check Fus, when it have started and only shows black screen, exit the application and start SendLog and send the log to [email protected]
Thanks alot for your help!
Click to expand...
Click to collapse
Just send...hope it helps..
tonysac said:
Just send...hope it helps..
Click to expand...
Click to collapse
Thank you.
Unfortunately I cant see any error msg. Pls try this version instead. I have disabled root.
SailfishOS for Galaxy Nexus (GSM)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a community port of Jolla's SailfishOS for the Galaxy Nexus.
It features a gesture-based user interface with a unique design and ease-of-use in mind.
For more information about SailfishOS please head over to sailfishos.org.
This is not an Android ROM, this is a different operating system.
It only uses parts of Android for hardware enablement (drivers).
Special Thanks to vakkov, sledges, mugna91, the Mer Project, the Nemo Project and all the fine people over at #sailfishos-porters
Release Notes:
This release is based on SailfishOS 1.0.8.19 (Tahkalampi).
The Galaxy Nexus port is considered to be of alpha quality.
Though depending on your usage it might be stabile enough for daily use.
Bug reports:
Please issue bugreports at the Nemo Project Bugzilla.
Known issues:
Due to an issue with ofono, reading from SIM does not work. You'll need to remove your PIN lock before flashing.
Setting an ambiance (color theme & wallpaper) causes hangs. Either needs the battery to be pulled, or you can SSH into the device and run:
systemctl --user restart lipstick
The startup wizard is getting skipped for now, due to the issue above.
The Jolla Store currently does not work. As an alternative you can try Warehouse for OpenRepos.
The camera does not work.
Due to redistribution issues the codec for MP3 can't shipped. To enable the codec run the following command:
devel-su zypper in gst-av
Instructions & Download:
Make a backup
Factory Reset (Wipe /data & /cache)
Wipe /system
Install CyanogenMod 10.1.3
Install SailfishOS on top:
Mirrors:
beidl.eu
Reboot
Old versions:
Alpha1:
XDA
beidl.eu
XDA:DevDB Information
SailfishOS for Galaxy Nexus, ROM for the Samsung Galaxy Nexus
Contributors
beidl, vakkov, sledges
ROM Kernel: Linux 3.0.x
Version Information
Status: Alpha
Created 2014-08-03
Last Updated 2014-08-24
Reserved
Changes:
August 24th, 2014:
Notification LED working
Bluetooth activation/deactivation fixed
Changes for Video playback (work in progress)
August 3rd, 2014:
Initial release
Nice & interesting..
Awesome! I'd love to check this out, as I've been following the progress in the other thread! (And because I'd actually like to check sailfish out, I never experienced Maemo and Meego so this will be an entirely new experience). However the XDA download link is unbelievably slow (Topping out at like 30 KB/s maximum on a decent internet connection). Does anyone have a download link from a service such as Google Drive/Mega/AFH? I'd be extremely thankful if someone did have a mirror, and would return the favour by uploading it. (If the OP allows for mirrors).
Justice™ said:
Awesome! I'd love to check this out, as I've been following the progress in the other thread! (And because I'd actually like to check sailfish out, I never experienced Maemo and Meego so this will be an entirely new experience). However the XDA download link is unbelievably slow (Topping out at like 30 KB/s maximum on a decent internet connection). Does anyone have a download link from a service such as Google Drive/Mega/AFH? I'd be extremely thankful if someone did have a mirror, and would return the favour by uploading it. (If the OP allows for mirrors).
Click to expand...
Click to collapse
Mirror to my private server added.
Ubuntu 14.04 recognizes the device as a ethernet cable connection..
I've played around the USB settings and all the others are charging-only.
freshgiammi said:
Ubuntu 14.04 recognizes the device as a ethernet cable connection..
I've played around the USB settings and all the others are charging-only.
Click to expand...
Click to collapse
Alright, definitely something nobody has tested, for whatever reason. As you are using Ubuntu, a quick sshfs mount to [email protected] might do it for now.
beidl said:
Alright, definitely something nobody has tested, for whatever reason. As you are using Ubuntu, a quick sshfs mount to [email protected] might do it for now.
Click to expand...
Click to collapse
Also, powering down the device while connected via USB to the PC, reboots it instead of shutting it down.
Can't try sshfs since i've just restored my Android backup bc Gnex is my daily driver, I'm sorry.
i couldnt select allow untrusted software to install warehouse. it does nothing when i select accept to allow it o settings.
freshgiammi said:
Also, powering down the device while connected via USB to the PC, reboots it instead of shutting it down.
Can't try sshfs since i've just restored my Android backup bc Gnex is my daily driver, I'm sorry.
Click to expand...
Click to collapse
As mentioned, the "Alpha" tag is pretty much justified. Thank you for testing.
Also, the "untrusted software" switch is pretty useless and installing 3rd party applications
is supposed to be done through the command line for now.
beidl said:
As mentioned, the "Alpha" tag is pretty much justified. Thank you for testing.
Also, the "untrusted software" switch is pretty useless and installing 3rd party applications
is supposed to be done through the command line for now.
Click to expand...
Click to collapse
so i have to install cm10.1.3 maguro and install the sailfish os alpha..?
cause it been 15minute it's stuck on google boot screen.
EDIT:
does it have to be EXT4..?
edit:
ah yeah it does ext4..
z3n0x1 said:
so i have to install cm10.1.3 maguro and install the sailfish os alpha..?
cause it been 15minute it's stuck on google boot screen.
EDIT:
does it have to be EXT4..?
Click to expand...
Click to collapse
Yes, I would assume it needs to be EXT4
Justice™ said:
Yes, I would assume it needs to be EXT4
Click to expand...
Click to collapse
yup correct just installed it now..
and now need to install the alternative jolla store.. the warehouse.. but i don't know how..
allow untrusted software are not working..
what i have to go.. even get the warehouse.rpm.. it still can't be installed..
z3n0x1 said:
yup correct just installed it now..
and now need to install the alternative jolla store.. the warehouse.. but i don't know how..
allow untrusted software are not working..
what i have to go.. even get the warehouse.rpm.. it still can't be installed..
Click to expand...
Click to collapse
You need to install it through the terminal, I'm not sure what the command is to install rpms of the top of my head, so googling it would probably get you an answer.
Justice™ said:
You need to install it through the terminal, I'm not sure what the command is to install rpms of the top of my head, so googling it would probably get you an answer.
Click to expand...
Click to collapse
well i got this...
after download the warehouse.rpm
goto setting > develoment > set password > save
type into terminal: devel-su -c harbour-warehouse
and type the password.. but nothing comes up
do i have to restart after save password or maybe restart after type pass word?? :silly:
EDIT:
open terminal
type cd ~/Downloads
type pkcon install-local ./downloaded-package.rpm
got "fatal error:nothing provides libsailfishapp.so.1 needed by harbour-warehouse-0.3-20.armv7h"
need the libsailfishapp.so.1.. lookfor it now..
the alpha looks smooth untill now been few hours test.. message working.. wifi.. haven't check the rest..
im still curious about how to install .rpm
z3n0x1 said:
well i got this...
after download the warehouse.rpm
goto setting > develoment > set password > save
type into terminal: devel-su -c harbour-warehouse
and type the password.. but nothing comes up
do i have to restart after save password or maybe restart after type pass word?? :silly:
the alpha looks smooth untill now been few hours test.. message working.. wifi.. haven't check the rest..
im still curious about how to install .rpm
Click to expand...
Click to collapse
I assume you'd need to elevate to root using devel-su, and then use one of the commands I've quoted below to install the warehouse rpm.
From terminal, root
Install a package
rpm –ivh packagename
upgrade a package
rpm –Uvh packagename
you can find out what the switches mean by doing a rpm --help from the command line.
Click to expand...
Click to collapse
I think -ivh would indicate installation and -uvh being the uninstall process
Justice™ said:
I assume you'd need to elevate to root using devel-su, and then use one of the commands I've quoted below to install the warehouse rpm.
I think -ivh would indicate installation and -uvh being the uninstall process
Click to expand...
Click to collapse
yes it's seems so..
i'll try you code now..
or maybe the -uvh are the upgrade..?? since it's upgrade on the code you are quote..
EDIT:
error: failed dependdencies:
libsailfishapp.so.1 is needed by harbour-warehouse-0.3-20.armv7h
so i perssume it the libsailfishapp.so.1 the problem..
http://forum.xda-developers.com/showpost.php?p=53171554&postcount=90
he's said that just copy it from /usr/lib/ . but how come even we don't have filemanager..
i'll try the pkcon install jolla-fileman (the native file manager from jolla) apprently the rpm are not there..
just maybe.. even we have the native file manager.. the missing libsailfishapp.so.1 still occur..
z3n0x1 said:
yes it's seems so..
i'll try you code now..
or maybe the -uvh are the upgrade..?? since it's upgrade on the code you are quote..
Click to expand...
Click to collapse
I must've misread it as uninstall then, yeah.
Justice™ said:
I must've misread it as uninstall then, yeah.
Click to expand...
Click to collapse
oh my im deprresed Lol
oh my now what should i do..
is there anyway that we can reach the root via computer..?
z3n0x1 said:
oh my im deprresed Lol
oh my now what should i do..
is there anyway that we can reach the root via computer..?
Click to expand...
Click to collapse
You could try and SSH in and run the commands, which may be easier, I'm trying to get the warehouse installed now
Dear XDA-Dev-Community,
i have here a china-import with a supposed Android 10.
I would like to install a linaege or other ROM, but which one should I use?
Can you help me?
Basic knowledge for installing and testing is available...
In the appendix you can find some pictures for evaluation.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nobody can help?
Maybe I can build my own Custom Rom for this device?
What i hove to do? Save the Drivers?!?!
Anybody know a good guide for me?
Probably a faked one... what build.prop entry ro.board.platform says?
And/or ro.mediatek.platform?
next message
CXZa said:
Probably a faked one... what build.prop entry ro.board.platform says?
And/or ro.mediatek.platform?
Click to expand...
Click to collapse
adb devices -l gives this:
Code:
device usb:1-2 product:P40 Pro+ model:U2 device:Smartphone transport_id:1
Code:
[ro.board.platform]: [mt6580]
[ro.mediatek.platform]: [MT6580]
complete getprop:
https://pastebin.com/h66R0mNk
So, MT6580 and probably a Lollipop. Could be worse.
There is some jlinksz (maker of these) threads here.
Also at 4pda, where there is more info and stuff.
Jlinksz K960 - Обсуждение - 4PDA
Jlinksz K960 - Обсуждение, Планшет, 9.6"
4pda.ru
I would not do much to it if it works well enough as it is. But if you do take a backup first as finding correct one later can be really really hard...
CXZa said:
So, MT6580 and probably a Lollipop. Could be worse.
Click to expand...
Click to collapse
Why worse? What problems you see?
CXZa said:
I would not do much to it if it works well enough as it is.
Click to expand...
Click to collapse
This is not an option. Its so creepy and full of preinstalled apps i can´t trust, u know?
So can i build a custom rom by extract the drivers and AOSP? Is this possible with beginner skills on coding?
0
Seppppx said:
I might be able to help. The kernel source is missing, but there are some device trees for other mt6580 phones. I will try to craft a device tree for this phone.
Click to expand...
Click to collapse
Thanks a lot! I will deliver how fast i can. But this took a long time and i get some troubles:
Seppppx said:
For now i need these things:
1. The android version.
Click to expand...
Click to collapse
Labeld as Android 10, but it's a fake. It looks like Android 6 / Marshmallow
2. raw dd'ed boot image of the device
3. raw dd'ed system image of the device
Click to expand...
Click to collapse
here the trouble beginns...
3. raw dd'ed system image of the device
[/QUOTE]
So i tried to get root by some tools, from this site here:
How to root your Android smartphone: Google, OnePlus, Samsung, Xiaomi, and more
Rooting your phone is still possible — and fun — these days. Here's how to do it on your Android device.
www.xda-developers.com
But nothing works! by adb sideload or apk-install...
Some advice?
I have the exact same phone, same issues as Ronny has. Have made a backup image of the phone but it's quite large in size ( over 5gb broken into 3 files). Would this be of use in in figuring out how to Root the phone?
B
BruizerBG said:
Have made a backup image of the phone but it's quite large in size ( over 5gb broken into 3 files).
Click to expand...
Click to collapse
Yeah, i´m not alone ;D
Would like to hear how you done this!
And my offer to host your files for downloading on my nextcloud instance.
Could give you an uploadlink (password save) and publish the link here...
Seppppx said:
I might be able to help. The kernel source is missing, but there are some device trees for other mt6580 phones. I will try to craft a device tree for this phone.
For now i need these things:
1. The android version.
2. raw dd'ed boot image of the device
3. raw dd'ed system image of the device
Click to expand...
Click to collapse
Hi Seppppx, I have this phone with Android 5.1 on it. I use Linux so I am assuming I can set the phone up and do the dd's via an adb command?
Any guidance you can give on the correct way to do this would be good and I can try and get the files available for you .
B
ronnyst said:
Yeah, i´m not alone ;D
Would like to hear how you done this!
And my offer to host your files for downloading on my nextcloud instance.
Could give you an uploadlink (password save) and publish the link here...
Click to expand...
Click to collapse
Hi Ronny, you can backup the files on the phone by entering Recovery mode. Switch off the phone. Then, at the same time, hold down the power and volume up buttons down until a small menu appears in the middle of the screen. Choose the recovery option, volume up scrolls through the list, volume down selects which option you want from recovery, fastboot or normal. You'll have a android image pop up, maybe with the message "no command " , just wait or press the same button combination again and the recovery menu should appear . In the list will be the system or user files backup. I see from your images though that you have already figured most of the out.
That only gives us no. 3 of the files that Seppppx needs so I have asked him how to get the bootloader dump.
B
BruizerBG said:
Hi Seppppx, I have this phone with Android 5.1 on it. I use Linux so I am assuming I can set the phone up and do the dd's via an adb command?
Click to expand...
Click to collapse
At first: You need to be root do dd boot and systemimages. After you got it you get try this:
[Guide] Dumping boot.img & recovery.img using dd (for complicated partitions)
Hi there! i am new to forums as well as in developing. i have recently taken interest in making cyanogenmod for my device. So, i have been searching web for hours to dump boot.img and recovery.img for my device. As my device is a mediatek device...
forum.xda-developers.com
But i tried this and i failed because a doesn´t have su (root). So i tried to use adb push but even then i cant access the Boot/system-image folders (cause no root). See my previous posts for...
BruizerBG said:
Hi Ronny, you can backup the files on the phone by entering Recovery mode. Switch off the phone. Then, at the same time, hold down the power and volume up buttons down until a small menu appears in the middle of the screen. Choose the recovery option, volume up scrolls through the list, volume down selects which option you want from recovery, fastboot or normal. You'll have a android image pop up, maybe with the message "no command " , just wait or press the same button combination again and the recovery menu should appear . In the list will be the system or user files backup.
That only gives us no. 3 of the files that Seppppx needs so I have asked him how to get the bootloader dump.
B
Click to expand...
Click to collapse
Just look at my pictures from previous posts... I´d already done this...
BruizerBG said:
That only gives us no. 3 of the files that Seppppx needs so I have asked him how to get the bootloader dump.
B
Click to expand...
Click to collapse
Sorry Bruizer, but this option gives us only a dump of the userdata. this will doesn´t help Seppppx.
Any update on this? I have received a phone to use as back up until I get my own and it's the same type of deal as far as chinese phone goes.
Also, I forgot to mention that I was looking through the adb pull screen shot and even though I do not currently have root I can still cd to /dev/block/platform/mtk-msdc.0/ without viewing contents but when i try to cd by-name there is no directory by that name.... I want to be able to achieve root and also possibly make a custom rom for this device and I'm willing to follow any suggestions anybody has. Clearly the boot.img and such are in a different directory but I'm going to have to do more digging.
whizpopthat said:
Any update on this? I have received a phone to use as back up until I get my own and it's the same type of deal as far as chinese phone goes.
Click to expand...
Click to collapse
sorry no updates. we (BruizerBG and me) aren´t able to dd the boot partition.
I would be happy for any advice or help!!!
ronnyst said:
sorry no updates. we (BruizerBG and me) aren´t able to dd the boot partition.
I would be happy for any advice or help!!!
Click to expand...
Click to collapse
I'm trying to find some time to do some digging about finding the boot partition because as I stated in my last post the by-name dir doesn't exist but obviously we are unable to find out which dirs do exist without root... If I come up with something I will be sure to let you know.
Hi, i managed to root my blackshark 3 KLEN2008060OS00MP3 With this method https://forum.xda-developers.com/t/...-way-bl-unlocking-twrp-ota-fix.4147441/page-6 so up to my understanding i have magisk and havent changed the system too much (im very very noob) i only did this because the tutorial was very good and step by step.
my phone has warned me today that i have available the joyui update KLEN2102020OS00mp4, can i just press the download buttom and install the ota without losing root?. and if i cant can anyone give me a small tuto of how to do it?
thank you very much
mrleyva said:
Hi, i managed to root my blackshark 3 KLEN2008060OS00MP3 With this method https://forum.xda-developers.com/t/...-way-bl-unlocking-twrp-ota-fix.4147441/page-6 so up to my understanding i have magisk and havent changed the system too much (im very very noob) i only did this because the tutorial was very good and step by step.
my phone has warned me today that i have available the joyui update KLEN2102020OS00mp4, can i just press the download buttom and install the ota without losing root?. and if i cant can anyone give me a small tuto of how to do it?
thank you very much
Click to expand...
Click to collapse
You can't... It will fail after the download cus you need a clean stock ROM to update your BS3... Do you have this update to share here?
Is this the joyui 12 global update ?
It doesn't seems
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
USB connection of you with the computer continues to work ok after this 12/2020 update?
Mine no longer connects with the computer for data transfer and just keeps charging .... I posted on the topic of this and here also to find out if this update is causing this because I noticed it in my post after the update.
gilbermarcilio said:
USB connection of you with the computer continues to work ok after this 12/2020 update?
Mine no longer connects with the computer for data transfer and just keeps charging .... I posted on the topic of this and here also to find out if this update is causing this because I noticed it in my post after the update.
Click to expand...
Click to collapse
Sounds like you don't have the drivers for this phone... What name the device has when you connect it to the pc?
pleas please share the ota
SmokeAnDrink said:
Sounds like you don't have the drivers for this phone... What name the device has when you connect it to the pc?
Click to expand...
Click to collapse
Smoke there is the problem I connect the Black Shark 3 on the PC and simply the device only charges ...
On the PC nothing changes and I open the task manager simply not even recognize the device or appear as an exclamation that failed to install the driver.
I have already tested it on several USB PCs and on 3 USB cables and USB 3.0 speed and nothing the phone only charges and does not connect to the PC or Macbook Air that I tried too ...
This is very sinister because the phone simply lost connection to the pc and only charges or I can use OTG adapter to connect pen drive to it and that accepts ...
NOTE: The Developer is already active and I have already marked it in USB Settings for data transfer and without chance the pc does not even recognize anything and the problem is not with the PC because I have 3 more devices at home and tested and all normally connects a Poco M3 Cubot Note 20 Pro and an Umidigi Bison all connect with the PC without a problem except this black shark that died the connection with the PC very sad that.
sco-mito said:
pleas please share the ota
Click to expand...
Click to collapse
After several attempts to pause the download of the OTA at 100% (since upon reaching 100% was automatically deleted) I have it uploaded to mega, I hope it's all there and there is no problem and before anything else, make a backup in case something weird happens .... Anyway I will try to install it later, if anyone wants to do it before here's the mega link...
389.86 MB file on MEGA
mega.nz
SmokeAnDrink said:
After several attempts to pause the download of the OTA at 100% (since upon reaching 100% was automatically deleted) I have it uploaded to mega, I hope it's all there and there is no problem and before anything else, make a backup in case something weird happens .... Anyway I will try to install it later, if anyone wants to do it before here's the mega link...
389.86 MB file on MEGA
mega.nz
Click to expand...
Click to collapse
You're my hero
@SmokeAnDrink TWRP says it's corrupted
SmokeAnDrink said:
After several attempts to pause the download of the OTA at 100% (since upon reaching 100% was automatically deleted) I have it uploaded to mega, I hope it's all there and there is no problem and before anything else, make a backup in case something weird happens .... Anyway I will try to install it later, if anyone wants to do it before here's the mega link...
389.86 MB file on MEGA
mega.nz
Click to expand...
Click to collapse
TRied putting in sdcard/ota/update.zip
and *#*#1027#*#* , local update gives ota error (20) did u update it thru twrp?
you have to get the ota link by adb: https://forum.xda-developers.com/t/...our-android-device-using-logcat-file.3773083/
If you cant find the link you can pm me the logcat...
aerial4ce said:
TRied putting in sdcard/ota/update.zip
and *#*#1027#*#* , local update gives ota error (20) did u update it thru twrp?
Click to expand...
Click to collapse
Error 20 caused of device has twrp. I tried both, with or without custom recovery. Without twrp, 1027 able to update
Sorry, I was working and completely forgot about this. Here is the link from adb
"Model": "KLE-H0",
"Version": "KLEN2102020OS00MP4",
"URL": https://ota-oversea-1256119282.file...deltaota_8dfabcef45cda957295fbb9fb2340ba9.zip
kevin mitnick said:
Error 20 caused of device has twrp. I tried both, with or without custom recovery. Without twrp, 1027 able to update
Click to expand...
Click to collapse
Do you still have the recovery.img? If so, could you share it?
SmokeAnDrink said:
Do you still have the recovery.img? If so, could you share it?
Click to expand...
Click to collapse
yes i have. I will upload then share here. asap
SmokeAnDrink said:
Do you still have the recovery.img? If so, could you share it?
Click to expand...
Click to collapse
sorry for my mistake. I only have MP3 recovery. now I used CN MR1 and cant get backup recovery MP4..
That's the one I need. I'm still using the MP3 update.
kevin mitnick said:
sorry for my mistake. I only have MP3 recovery. now I used CN MR1 and cant get backup recovery MP4..
Click to expand...
Click to collapse
Can you share CN MR1 recovery as well?