Related
I've been struggling for several months now to get my MDAC III working with my built-in car Bluetooth hands-free. The full details are below, but in short, I'm told that the system seems to work OK with Wizard, and I'm wondering what about the Wizard could be different to the Artemis (Bluetooth stack perhaps?), and if there is a difference, is there anything I can do about it?
The full issue: The system I'm trying to connect with is in a Land Rover Freelander 2 (LR2 in the US) Initial pairing was a bit hit and miss, but now I've got the the phone paired with the PTI, that's not a problem and they automatically pair whenever I start the car.
I can succesfully initiate or answer a call from the car, but the call itself isn't routed through the car's speakers/mic, it just goes through the phone as normal. However, once in a call if I select the "privacy" option on the PTI (which would normally have the effect I've already got of passing the call to the phone), and then select the "hands free" option, it does what it should and routes the call through the car. Effectively, it's as if the system starts in "privacy" mode rather than "hands free". Once I've done this once, subsequent calls work fine, routing straight through the car, but only until the ignition's turned off. The next time I start the car up I'm still paired, but calls go through the phone again.
If anyone's got any suggestions, I'd really appreciate them.
Thanks!
Try this
Had similar in a BMW...
Try www.jetwaremobile.com
Thanks, did try that but didn't seem to help, it seemed to be more geared towards additional functions like phonebook syncing rather than just getting a working connection in the first place. Maybe I'll give it another go.
Same Probleme On 207
hi,
I have the same ....
I precise that work fine with the original m650 rom, i search many hours but i found nothing, i try bluetooth toggle with no effect...
please help us !
thank for dev for everything they do !
RE
I try many combinaison so:
if i want to use my bt car kit, i'm forced to validate hands free option at every phone call...
I think it's btaudiotoggle the cause of mly problem, he is included in the aje rom...
you think it's possible ?
TangerineTractor said:
Had similar in a BMW...
Try www.jetwaremobile.com
Click to expand...
Click to collapse
Thanks TangerineTractor!
I fixed the problem I have with car kit of OPEL ANTARA using the software you said. It works disable sending Phonebooks.
I am having a similar problem with Wizard Mobile 6 cooked ROM. Before with the official O2 ROM on my Xda Mini S, it worked fine. The car would automatically recognise the phone whenever in proximity, and all calls would go through the speaker.
Now, I have to press the car kit's button (Nokia Bluetooth) each time I get in the car, to tell it to search for devices - i.e. the phone doesn't automatically announce its presence.
So, is there a different Bluetooth Stack we can try?
My Orbit works fine with my Nokia CK-7W using a B&B ROM.
Thanks, and yep that's the same car kit I have.
When you get in the car, do you have to do anything, or does the car kit automatically detect the phone? Mine doesn't since getting the Wizard Mobile 6 cooked ROM.
Do you know what Bluetooth Stack you use, and if I can download it anywhere for the Wizard?
No, just switch on the ignition key and away it goes. Also if the car kit is set as the default hands free if the phone rings it should try to connect to the car kit.
The radio I am using is 2.95.90 I have no idea what bluetooth stack it is, Tom Codin cooked the ROM, he will know.
Okay thanks. Does anyone know if the BT Stack is part of the Radio ROM? If so I'll just try a different Radio ROM.
Has anyone had any luck with using their Hermes in a Ford, using their 'Advanced Bluetooth' car kit?
I have paired my MDA Vario II, running Schaps 3.60 WM6, with my new Ford Focus. This shows up as 'Ford Audio' on my phone. Incoming calls are now routed through the car stereo, and I can access my voice tags for outgoing calls by saying 'Mobile, Name'. So far so good!
The issue though, is with the Sim Access Protocol (SAP) routine. I have managed to access the phone contacts list just once, and that was after a wait of over 30 mins. I have never seen the list of recent or dialled calls. So all incoming calls show as just raw numbers, rather than names.
I have ensured that I transferred my main contacts to my Sim Card. I made sure that SAP was selected. I even downloaded and installed the Jetware SAP enhancement program. All to no avail.
Has anyone got SAP running, speedily, with a car kit?
Dont kno how much use this is going to be, but try using the rom Black Majic by JasJamming.
That is the only rom ive ever got to work properly with my Parrot 3200LS Car Kit.
I have a Focus ST with the advanced bluetooth car kit and have been able to access my contacts list when using Sleuth's ROM - but not the recent call list etc. I did not need to move my contacts to the SIM to get that though.
I've recently switched to FunKey's 3.62 ROM and while the car kit works for audio etc. I no longer get the contacts - having said that I haven't installed the BT SAP cab so no real surprises there.
To be honest I'm just glad the car kit works for audio - I've always had problems with the Tytn and car kits so it's very nice that it works at all
Thanks, jaso2005 and forza, for your comments. I think that WM6 has got a way to go to catch up even with Symbian, as far as car kits and SAP is concerned.
From your posts, it would seem that some ROMs are getting there.
I see that Shap's latest (4.00 Beta 2) contains the latest SAP utility and, as I am running his 3.60 ROM at the moment, I think I will wait for the 4.00 final release.
Schaps is just requesting people try his new beta ROM that has this feature.
Just throught I would add my name to the list of people having problems getting their Hermes to work with their Ford bluetooth carkit....
I've got my new s-max, but have not been able to get the phone work work with it. I can discover the car from the phone (ford audio) and pair it up. However, when I go to make a call, the phone does not think there is a carkit present. Also, if I go to the carkit setting on the ford computer it says it can't see a phone connected.
Hissing Syd & Forza, did you do anything special to get yours to work with the advance bluetooth? I've tried a couple of different ROMs and am now running Schaps 3.6a (have also tried 4)
thx
caspartfg said:
Just throught I would add my name to the list of people having problems getting their Hermes to work with their Ford bluetooth carkit....
I've got my new s-max, but have not been able to get the phone work work with it. I can discover the car from the phone (ford audio) and pair it up. However, when I go to make a call, the phone does not think there is a carkit present. Also, if I go to the carkit setting on the ford computer it says it can't see a phone connected.
Hissing Syd & Forza, did you do anything special to get yours to work with the advance bluetooth? I've tried a couple of different ROMs and am now running Schaps 3.6a (have also tried 4)
thx
Click to expand...
Click to collapse
I had the same problem with mine initially. The handbook says that you merely have to pair the phone, which you have done. Not true - you have to physicaly make your Hermes the 'Active Phone'. First, select Phone. Then press Menu. Then scroll to Select Active Phone, let it find your Hermes, select it, and it should work.
The selection of Active Phone is covered later in the handbook. It should be at the start.
Good luck!
Syd,
you'll love this, but the dealer forgot to put the bluetooth manual in the glove box. (I'm waiting for it come come through...) In the mean time, any chance of giving me some instructions on how to setup an active phone?
Thx
caspartfg - Have you activated the Bluetooth SAP?
In Schaps latest rom's 3.60a and 4.00 Beta this is in Programs > System Tools > SAP Settings
yes, I have tried with the SAP setting turned on and off. The problem I have is that the car cannot see the phone, even though it is paired.
Also, the phone does not attempt to make use of the handsfree when I make a call.
Thank you all for your suggested
C.
Make sure you have ticked the option to make the phone discoverable (Start/Settings/Connections/Bluetooth - Mode tab; "Make this device visible to other devices")
Hissing Syd is spot on - you do have to select it after the pairing. When I do mine, I delete any existing pairings on both the car and the phone. Soft reset the phone, turn the car radio off and then on. Then (with the radio switched on) search for bluetooth devices on the phone, pair with the "Ford Audio" service. Turn the radio off and then on, press Phone, press Menu, scroll to Select Active phone and press the centre button on Phone1. It can take a few minutes to finally pair up, but it does get there in the end!
I've turned on SAP on the FunKey ROM but still don't get contacts etc. coming through on the car kit - but as I said I'm not that bothered to be honest!
caspartfg said:
yes, I have tried with the SAP setting turned on and off. The problem I have is that the car cannot see the phone, even though it is paired.
Also, the phone does not attempt to make use of the handsfree when I make a call.
Thank you all for your suggested
C.
Click to expand...
Click to collapse
Thank all, just to let you know the phone is working with the carkit.
I've been able to make / receive calls. I have also been able to browse the contact list on my phone via the info on my convers+ dash. Also when calls come in, they show the name of the caller.
I'll do some more testing when I get the manual through, but all of the functions the carkit provides seem to be supported. I've also been able to make voice dialiing features of the car..
I love the fact you can talk to the ford and instruct it around the phone, radio, climate control, etc....... feels like a middle age version of knight rider.....
Thx all
C.
Having the same problem with an Orbit (Artemis)
caspartfg,
I'm having exactly the same problem with my Artiemis - have put something in that Forum but no reply yet
http://forum.xda-developers.com/showthread.php?t=340609
Also - what Bluetooth manual ! The standard mondeo manual has some info but not much. Am I missing the bluetooth manual as well?
jftilbury,
Took quite a bit of fiddling around, but got there in the end....
Which head-unit do you have? - Mine is the Sony version that comes with the new s-max titanium.
To answer your specific questions:
1) yes, there was a separate bluetooth manual. I had to ring the dealer and he posted me a copy
2) The thing the car manual didn't tell me about was that there is a second step to the pairing of the phone in which you need to active the phone in the head unit.
i) make sure the phone is discoverable in bluetooth
ii) pair the phone with head unit as you described above.
iii) select the phone setting on the head unit
iv) press 'menu' (I think) and then in one of the options you can set the phone to active
after that, it all worked a treat for me..... Let me know if this works for you. If my instructions are dodgy, I'll double check
Spot on !
Excellent, that worked a treat. I also have the Sony CD unit, but in the Mondeo, and it is now phoning anyone that will pick up the phone.
The phone book is now going across OK. My problem is that as my company's entire phone book gets sync'ed onto the XDA I now have around 500 numbers on the car menu making it unusable. Never mind, the phone works which is the main thing.
Voice recognition next...
Thanks for your help, I'll point the other thread here as well.
jftilbury said:
Excellent, that worked a treat. I also have the Sony CD unit, but in the Mondeo, and it is now phoning anyone that will pick up the phone.
The phone book is now going across OK. My problem is that as my company's entire phone book gets sync'ed onto the XDA I now have around 500 numbers on the car menu making it unusable. Never mind, the phone works which is the main thing.
Voice recognition next...
Thanks for your help, I'll point the other thread here as well.
Click to expand...
Click to collapse
I'm pleased that we helped solve your problem. My question to you, which ROM are you using? I still have problems with uploading the phone book to the Sony unit with my Schaps 3.60a ROM.
ROM version
I am using the standard ROM downloaded from the O2 support site at:
http://xda.o2.co.uk/xdaOrbitSoftware.html
This sends the download to the HTC site, with the file name:
RUU_Artemis_O2_UK_3.4.206.2_4.1.13.28_02.67.90_Ship.exe
The numbers I can find are:
CE OS 5.2.1238 (Build 17745.0.2.3)
ROM version: 3.4.206.2 WWE
ROM date: 4/18/07
Radio version: 02.67.90
Protocol version: 4.1.13.28
ExtROM 3.4.206.101
Not sure if this helps as it is for the Artemis.
Hissing Syd said:
I'm pleased that we helped solve your problem. My question to you, which ROM are you using? I still have problems with uploading the phone book to the Sony unit with my Schaps 3.60a ROM.
Click to expand...
Click to collapse
I am using Schaps 3.6a... The extra piece I did was to go into the advanced config, bluetooth tab and turn on OBEX. You should also make sure Remote SIM access is turned on in the SAP application.
Hope this helps, worked for me......
C.
Mine in fact worked too well - sending across all 500 numbers my company sync's onto my handset, making the phonebook unusable on the car.
However a Ford forum put me onto this bit of code:
http://www.jetwaremobile.com/
which does exactly what I want allowing me to create a category of people I want to appear in the car phonebook and away we go.
caspartfg said:
I am using Schaps 3.6a... The extra piece I did was to go into the advanced config, bluetooth tab and turn on OBEX. You should also make sure Remote SIM access is turned on in the SAP application.
Hope this helps, worked for me......
C.
Click to expand...
Click to collapse
Thanks very much for that crucial bit of info. Since I started this thread, I have changed ROM to RUU_Hermes_TMO_UK_3.60.110.4_6275_1.50.00.00_108_Ship.exe and, by enabling OBEX, it all works a treat.
Anyone else having bluetooth problems or is this operator error?
I can switch bluetooth on, make my handset visible, pair with other devices and receive files from other handsets, however when I try to send anything, I can't connect to paired devices and bluetooth hangs meaning I have to switch my handset off and on.
I was using bluetooh last night and all was ok
but unlike my last phone c902 the bluetooth is on a timer then turns off visibility
Working fine for me. Paired up my bluetooth headset and will still be working hours later even if I haven't interacted between them.
It's strange, devices show as paired but not connected and I can't make them connect.
Have been able to use BT for file transfer between my Desire and laptop and HD2. Also connected to my Plantronics BT headset. I think you need to have an appropriate BT driver for some devices like BT keyboards.
I too am having minor issues.
The wife's hands free kit (Parrot CK3000 evo) in the car supports voice dialling by sending contacts to it and then recording a tag which is associated with the contact. This way the kit can do the voice dialling for handsets that don't support it.
For some reason the Desire refuses to send contacts to the hands free kit claiming it doesn't support the correct bluetooth profiles. This obviously isn't the case as all the other phones we have tried work perfectly with the CK3000.
Only a minor issue, as in my car which has the CK3300 everything works fine (including syncing the phonebook to the car kit). It's more of a problem for the wife though, as she wants to upgrade to the Desire on Saturday when her contract is up for renewal but at the minute won't be able to voice dial from the car.
Dae.
Strange. I'll try connceting to my laptop later.
I too am having difficulty sending files over bluetooth. I can accept files fine, from any source, yet cannot send from my HTC Desire. First the notification says complete, but 0 files sent. Then going inside it shows it has failed. And then clicking it and retrying shows Unknown file. What's going on??
Tried sending to two mobile phones, and a Windows 7 laptop. Easily works the other way around. Also, sometimes I can't turn my bluetooth off properly, it just crashes the chip while turning off and can't turn it on or off until I reboot. Thought it might be Advanced Task Killer, but tried the same thing immediately after a reboot and still can't send files. Any ideas?
still no closer to solving this, I think it may be going back tomorrow.
I'm also having problems...
I have the Parrot CK3200 LS-COLOR and it connects to the phone ok, or vice versa and then it always falls over when trying to sync the contacts... It shows my facebook profile pic and then it fails.
If I dial a contact through the phone, or receive a call, it comes out fine through the speakers.
So I'm wondering if it's something to do with the way the the desire handles contacts.
Sorry if there's been a resolution to this, I did search first
me to also having the same problems. spent 4 hours on google last night and still no closer.
Weird as it might sound, I had no issues connectiong to car stereo. But when I tried to pair it with friends mobile, SonyEricsson c902 - it crashed!
I was trying to send a picture file I have downloaded using bluetooth.
Also, can anyone tell me how to send a mp3 file I have downloaded off the internet to another mobile using bluetooth?
Thanks
Have you enabled FTP under Bluetooth advanced settings? I have no problem transfering files to and from PC or other mobile phone. Also make sure the device is dicroverable and paired.
I had a similar problem which I wrote to HTC about: I paired and connected the Desire with my bluetooth car head unit and it works fine for phone & audio, but it will not auto connect each time I get in the car and I have to go through the pairing process and enter a code each time. Voice dialling also doesn't work. My previous handset (Touch HD) connected automatically if the bluetooth was on so I don't think it's a problem with the head unit. Someone suggested it might be due to an old bluetooth protocol on the head unit (I'd like to avoid having to replace it if possible).
i managed to send a file to another htc desire today, last time i tried, i admit i didn't enable the ftp service, however I could not send via bluetooth to a nokia n96 but to be fair, my desire probably just didn't want anything to do with it . but on a serious note I cant seem to get it to send to my windows 7 x64 disto.
dreamdealer said:
i managed to send a file to another htc desire today, last time i tried, i admit i didn't enable the ftp service, however I could not send via bluetooth to a nokia n96 but to be fair, my desire probably just didn't want anything to do with it . but on a serious note I cant seem to get it to send to my windows 7 x64 disto.
Click to expand...
Click to collapse
take that back .. apart from the N96 joke.. reason windows was not accepting was because avast anti virus was blocking it.
Pumpkin Lantern said:
I'm also having problems...
I have the Parrot CK3200 LS-COLOR and it connects to the phone ok, or vice versa and then it always falls over when trying to sync the contacts... It shows my facebook profile pic and then it fails.
If I dial a contact through the phone, or receive a call, it comes out fine through the speakers.
So I'm wondering if it's something to do with the way the the desire handles contacts.
Sorry if there's been a resolution to this, I did search first
Click to expand...
Click to collapse
I have the same problem, any help would be appreciated...
Sorted! (For Desire)
Sorted this problem out! See new thread
Pumpkin Lantern said:
Sorted this problem out! See new thread
Click to expand...
Click to collapse
where's the new thread?
yurikg said:
where's the new thread?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=668042
can anyone tell me if I can update the Bluetooth in my HTC Desire or have more profiles. the phone is branded o2 but can be rooted. I dont want to change anything else in the ROM just make the bluetooth connect automaticaly & reliably to the car.
There are newer software builds available but have no mention of updating bluetooth.
Ther are no OTA updates available.
Software Number is 2.14.207.1
Andriod 2.2
Thanks for any advice in advance.
Trampsdad
Can't you just pair the 2 devices together? I personally don't use Bluetooth so no idea on that aspect. Also, the software is so out of date because o2 cba to release and update. There are major updates since yours. It might be worth considering to root so then you can flash a newer ROM, or infact, you don't need to root and just use an RUU. With the newest software. No need to root it then and less chance of it mess up.
Hope this helps
I still have some strangeness with Bluetooth. From what I read there are some updates in Honeycomb and maybe gingerbread. But I don't have a feeling what you are looking for is in FroYo
Sent from my HTC Desire using XDA App
Well I have a Kenwood Headunit with Bluetooth and the connection to that using stock Froyo and LeeDroid showed some interesting results. Gaps in the phonebook for instance. However, putting a 2.3 ROM (Ginger Villain) sorted that out, its fine now.
Bluetooth depends on the other device too.
What exactly is the problem you are having?
What Car do you have?
What Bluetooth system is installed (is it standard)?
I have used my desire in a number of cars (Vauxhall, Ford, BMW) without any isses with pairing, using the Phonebook,etc. is a different matter.
Personally, I have just received a new BMW 528i, and it doesn't get on well with my Desire at all.
It pairs OK and can use both the phone and music, but when I leave and return to the car, it just refuses to auto-connect again, and I have to go through the pairing procedure again.
Oh, except one - the time I went back to the garage to 'complain' about it and ask for advice, when it worked perfectly. Until I got home again!
Have experimented with my old Nokia N85, and that works fine, too. So it's either the Desire or an incompatibility between it and the car.
Oh, my Desire is running MCR r9 (FroYo) at the moment. Are there known issues with this? Info on any Bluetooth updates I could apply would be gratefully received!
i have to enter my pairing code every time i connect my bt headset - i took this to be a quirk for the moment - hoping its fixed in 2.2.2/2.3.x etc.
Lothaen said:
i have to enter my pairing code every time i connect my bt headset - i took this to be a quirk for the moment - hoping its fixed in 2.2.2/2.3.x etc.
Click to expand...
Click to collapse
Im having this same problem also with a Pioneer Head Unit in my car.
Bluetooth has always been troublesome as it doesn't auto connect. It will connect if I either manually click on "Pioneer Head Unit" or turn Bluetooth off and on (which I automate with tasker).
The pin thing is new and happens with all roms I have tried except LeeDroid, (which I prefer not to use as I don't like sense much). Leedroid still has the auto connect problem.
daveaus said:
Bluetooth has always been troublesome as it doesn't auto connect. It will connect if I either manually click on "Pioneer Head Unit" or turn Bluetooth off and on (which I automate with tasker).
Click to expand...
Click to collapse
Some good hints there - thanks!
I can connect far more reliably if I initiate the connection from the phone than from the car.
Likewise, if BT is switched off on the phone and then turned on after the car is on, then it sometimes works, too. Certainly don't need to re-pair anywhere near as often.
Can I ask how you use Tasker to automate the BT switching? I've not used that (I use Setting Profiles instead which I understand does roughly the same thing), so am curious what kind of rule you have that's useful for this.
Cheers.
TheMegaMan_ said:
Can I ask how you use Tasker to automate the BT switching? I've not used that (I use Setting Profiles instead which I understand does roughly the same thing), so am curious what kind of rule you have that's useful for this.
Click to expand...
Click to collapse
I use the following rules:
On wifi connection turn off bluetooth
On wifi disconnection wait 30 seconds and turn bluetooth on.
If not wifi connected & not bluetooth connected turn bluetooth off and on every 5 minutes.
If not wifi connected & not bluetooth connected and incoming call turn bluetooth off and on.
If not wifi connected & not bluetooth connected when display switched on turn bluetooth off and on.
The battery drain hasn't been a problem, if I go away or won't be using my car for a while I disable tasker. Of course this doesn't help when it keeps asking for the pin.
daveaus said:
I use the following rules:
Click to expand...
Click to collapse
Ah, cunning! Of course...toggle it when it's not already connected. Prifile Settings doesn't seem to let me toggle things like BT directly, although I could probably do so by setting some appropriate profiles.
I'll have to experiment...or just buy Tasker, instead!
daveaus said:
Of course this doesn't help when it keeps asking for the pin.
Click to expand...
Click to collapse
True, but so far in my case, I've only had that when I've tried to initiate connection from the car. Hopefully your trick will mean I don't need to do that so often.
Anyone found a gingerbread rom (or any rom!) with improved Bluetooth?
I have found the bluetooth to be terrible on the desire. I have got about 3 devices that my phone just refuses to pair with.
Currently I am trying to get it to connect with an Elm 327 Obd scanner. No luck, it asks for a pin, then I enter the pin, but it immediately rejects it.
I have tried oxygen rom, leedroid, stock froyo, everything...
I also have a parrot hands free kit that does the same thing, asks for pin, then does nothing...
Something makes me think it might be the radio or something. Except that my phone DOES connect with my scala motorbike helmet... So frustrating
Sent from my HTC Desire using XDA App
hey guys after all these years I'm finally back to Android.
I have the HTC One m8 with Verizon and so far I really like it. the only problem is I can't get the Bluetooth to work with my car. Its a 11 Mazda 3, what happens is when it ask for the password for the pairing I enter it (all zeros) after I push okay the car lose the connection and the phone says paired but my car dosent ask for a devise name. I hear there's a problem with this version of Android and Bluetooth into cars. is there like an app i can download or something I can do please someone help. I don't wanna go back to my iPhone
iNFiNiTY125 said:
hey guys after all these years I'm finally back to Android.
I have the HTC One m8 with Verizon and so far I really like it. the only problem is I can't get the Bluetooth to work with my car. Its a 11 Mazda 3, what happens is when it ask for the password for the pairing I enter it (all zeros) after I push okay the car lose the connection and the phone says paired but my car dosent ask for a devise name. I hear there's a problem with this version of Android and Bluetooth into cars. is there like an app i can download or something I can do please somt wanna go back to my iPhone
Click to expand...
Click to collapse
I don't have a Mazda, but have the Verizon M8 and have no issues pairing my phone for both calls and audio, regardless of whatever ROM I've tried. Your car is three years old, so I suspect the problem is there. I would take it into Mazda and see if there is a software update for their entertainment/bluetooth. Also, if you've paired up your phone to anything else previously (headphones, speaker, etc.) you might want to delete those pairings before trying to set it up again. If none of those things work, then you might be out of luck unless you want to upgrade your car stereo. There are many instances where certain devices/cars just don't work well together, but the M8 has the latest bluetooth release available. Good luck.
Thanks for the support and for helping find the Solution!
ebb said:
I don't have a Mazda, but have the Verizon M8 and have no issues pairing my phone for both calls and audio, regardless of whatever ROM I've tried. Your car is three years old, so I suspect the problem is there. I would take it into Mazda and see if there is a software update for their entertainment/bluetooth. Also, if you've paired up your phone to anything else previously (headphones, speaker, etc.) you might want to delete those pairings before trying to set it up again. If none of those things work, then you might be out of luck unless you want to upgrade your car stereo. There are many instances where certain devices/cars just don't work well together, but the M8 has the latest bluetooth release available. Good luck.
Click to expand...
Click to collapse
Think you for your fast response, so I called up my dealership and they said they don't have any updates for my stereo.
But I did find a solution YAY!
1. keep one of the failed pairs in your phone
2. download "Bluetooth Connect and Play"
3. Here are the settings you want:
Bluetooth Receiver is [ON]
when this bluetooth device connects...
[*] Mazda
4. Click the 3 dots in the corner and click "Tweaks"
5. Heres what you want:
When trigger player
(*) Start player on basic bluetooth connect only
Seconds to wait 0
everything else unchecked
6. Make sure all other connections are deleted from your car and then set the car to pair while the code 0000 is on the screen go to your bluetooth settings and delete "Mazda" then click "Mazda" when it comes up enter 0000 and then bluetooth connect and play will come up and music will start playing
7. music will stop and it will ask you to name the device.. cool
8. enjoy wireless music