Has anyone had any luck with using their Hermes in a Ford, using their 'Advanced Bluetooth' car kit?
I have paired my MDA Vario II, running Schaps 3.60 WM6, with my new Ford Focus. This shows up as 'Ford Audio' on my phone. Incoming calls are now routed through the car stereo, and I can access my voice tags for outgoing calls by saying 'Mobile, Name'. So far so good!
The issue though, is with the Sim Access Protocol (SAP) routine. I have managed to access the phone contacts list just once, and that was after a wait of over 30 mins. I have never seen the list of recent or dialled calls. So all incoming calls show as just raw numbers, rather than names.
I have ensured that I transferred my main contacts to my Sim Card. I made sure that SAP was selected. I even downloaded and installed the Jetware SAP enhancement program. All to no avail.
Has anyone got SAP running, speedily, with a car kit?
Dont kno how much use this is going to be, but try using the rom Black Majic by JasJamming.
That is the only rom ive ever got to work properly with my Parrot 3200LS Car Kit.
I have a Focus ST with the advanced bluetooth car kit and have been able to access my contacts list when using Sleuth's ROM - but not the recent call list etc. I did not need to move my contacts to the SIM to get that though.
I've recently switched to FunKey's 3.62 ROM and while the car kit works for audio etc. I no longer get the contacts - having said that I haven't installed the BT SAP cab so no real surprises there.
To be honest I'm just glad the car kit works for audio - I've always had problems with the Tytn and car kits so it's very nice that it works at all
Thanks, jaso2005 and forza, for your comments. I think that WM6 has got a way to go to catch up even with Symbian, as far as car kits and SAP is concerned.
From your posts, it would seem that some ROMs are getting there.
I see that Shap's latest (4.00 Beta 2) contains the latest SAP utility and, as I am running his 3.60 ROM at the moment, I think I will wait for the 4.00 final release.
Schaps is just requesting people try his new beta ROM that has this feature.
Just throught I would add my name to the list of people having problems getting their Hermes to work with their Ford bluetooth carkit....
I've got my new s-max, but have not been able to get the phone work work with it. I can discover the car from the phone (ford audio) and pair it up. However, when I go to make a call, the phone does not think there is a carkit present. Also, if I go to the carkit setting on the ford computer it says it can't see a phone connected.
Hissing Syd & Forza, did you do anything special to get yours to work with the advance bluetooth? I've tried a couple of different ROMs and am now running Schaps 3.6a (have also tried 4)
thx
caspartfg said:
Just throught I would add my name to the list of people having problems getting their Hermes to work with their Ford bluetooth carkit....
I've got my new s-max, but have not been able to get the phone work work with it. I can discover the car from the phone (ford audio) and pair it up. However, when I go to make a call, the phone does not think there is a carkit present. Also, if I go to the carkit setting on the ford computer it says it can't see a phone connected.
Hissing Syd & Forza, did you do anything special to get yours to work with the advance bluetooth? I've tried a couple of different ROMs and am now running Schaps 3.6a (have also tried 4)
thx
Click to expand...
Click to collapse
I had the same problem with mine initially. The handbook says that you merely have to pair the phone, which you have done. Not true - you have to physicaly make your Hermes the 'Active Phone'. First, select Phone. Then press Menu. Then scroll to Select Active Phone, let it find your Hermes, select it, and it should work.
The selection of Active Phone is covered later in the handbook. It should be at the start.
Good luck!
Syd,
you'll love this, but the dealer forgot to put the bluetooth manual in the glove box. (I'm waiting for it come come through...) In the mean time, any chance of giving me some instructions on how to setup an active phone?
Thx
caspartfg - Have you activated the Bluetooth SAP?
In Schaps latest rom's 3.60a and 4.00 Beta this is in Programs > System Tools > SAP Settings
yes, I have tried with the SAP setting turned on and off. The problem I have is that the car cannot see the phone, even though it is paired.
Also, the phone does not attempt to make use of the handsfree when I make a call.
Thank you all for your suggested
C.
Make sure you have ticked the option to make the phone discoverable (Start/Settings/Connections/Bluetooth - Mode tab; "Make this device visible to other devices")
Hissing Syd is spot on - you do have to select it after the pairing. When I do mine, I delete any existing pairings on both the car and the phone. Soft reset the phone, turn the car radio off and then on. Then (with the radio switched on) search for bluetooth devices on the phone, pair with the "Ford Audio" service. Turn the radio off and then on, press Phone, press Menu, scroll to Select Active phone and press the centre button on Phone1. It can take a few minutes to finally pair up, but it does get there in the end!
I've turned on SAP on the FunKey ROM but still don't get contacts etc. coming through on the car kit - but as I said I'm not that bothered to be honest!
caspartfg said:
yes, I have tried with the SAP setting turned on and off. The problem I have is that the car cannot see the phone, even though it is paired.
Also, the phone does not attempt to make use of the handsfree when I make a call.
Thank you all for your suggested
C.
Click to expand...
Click to collapse
Thank all, just to let you know the phone is working with the carkit.
I've been able to make / receive calls. I have also been able to browse the contact list on my phone via the info on my convers+ dash. Also when calls come in, they show the name of the caller.
I'll do some more testing when I get the manual through, but all of the functions the carkit provides seem to be supported. I've also been able to make voice dialiing features of the car..
I love the fact you can talk to the ford and instruct it around the phone, radio, climate control, etc....... feels like a middle age version of knight rider.....
Thx all
C.
Having the same problem with an Orbit (Artemis)
caspartfg,
I'm having exactly the same problem with my Artiemis - have put something in that Forum but no reply yet
http://forum.xda-developers.com/showthread.php?t=340609
Also - what Bluetooth manual ! The standard mondeo manual has some info but not much. Am I missing the bluetooth manual as well?
jftilbury,
Took quite a bit of fiddling around, but got there in the end....
Which head-unit do you have? - Mine is the Sony version that comes with the new s-max titanium.
To answer your specific questions:
1) yes, there was a separate bluetooth manual. I had to ring the dealer and he posted me a copy
2) The thing the car manual didn't tell me about was that there is a second step to the pairing of the phone in which you need to active the phone in the head unit.
i) make sure the phone is discoverable in bluetooth
ii) pair the phone with head unit as you described above.
iii) select the phone setting on the head unit
iv) press 'menu' (I think) and then in one of the options you can set the phone to active
after that, it all worked a treat for me..... Let me know if this works for you. If my instructions are dodgy, I'll double check
Spot on !
Excellent, that worked a treat. I also have the Sony CD unit, but in the Mondeo, and it is now phoning anyone that will pick up the phone.
The phone book is now going across OK. My problem is that as my company's entire phone book gets sync'ed onto the XDA I now have around 500 numbers on the car menu making it unusable. Never mind, the phone works which is the main thing.
Voice recognition next...
Thanks for your help, I'll point the other thread here as well.
jftilbury said:
Excellent, that worked a treat. I also have the Sony CD unit, but in the Mondeo, and it is now phoning anyone that will pick up the phone.
The phone book is now going across OK. My problem is that as my company's entire phone book gets sync'ed onto the XDA I now have around 500 numbers on the car menu making it unusable. Never mind, the phone works which is the main thing.
Voice recognition next...
Thanks for your help, I'll point the other thread here as well.
Click to expand...
Click to collapse
I'm pleased that we helped solve your problem. My question to you, which ROM are you using? I still have problems with uploading the phone book to the Sony unit with my Schaps 3.60a ROM.
ROM version
I am using the standard ROM downloaded from the O2 support site at:
http://xda.o2.co.uk/xdaOrbitSoftware.html
This sends the download to the HTC site, with the file name:
RUU_Artemis_O2_UK_3.4.206.2_4.1.13.28_02.67.90_Ship.exe
The numbers I can find are:
CE OS 5.2.1238 (Build 17745.0.2.3)
ROM version: 3.4.206.2 WWE
ROM date: 4/18/07
Radio version: 02.67.90
Protocol version: 4.1.13.28
ExtROM 3.4.206.101
Not sure if this helps as it is for the Artemis.
Hissing Syd said:
I'm pleased that we helped solve your problem. My question to you, which ROM are you using? I still have problems with uploading the phone book to the Sony unit with my Schaps 3.60a ROM.
Click to expand...
Click to collapse
I am using Schaps 3.6a... The extra piece I did was to go into the advanced config, bluetooth tab and turn on OBEX. You should also make sure Remote SIM access is turned on in the SAP application.
Hope this helps, worked for me......
C.
Mine in fact worked too well - sending across all 500 numbers my company sync's onto my handset, making the phonebook unusable on the car.
However a Ford forum put me onto this bit of code:
http://www.jetwaremobile.com/
which does exactly what I want allowing me to create a category of people I want to appear in the car phonebook and away we go.
caspartfg said:
I am using Schaps 3.6a... The extra piece I did was to go into the advanced config, bluetooth tab and turn on OBEX. You should also make sure Remote SIM access is turned on in the SAP application.
Hope this helps, worked for me......
C.
Click to expand...
Click to collapse
Thanks very much for that crucial bit of info. Since I started this thread, I have changed ROM to RUU_Hermes_TMO_UK_3.60.110.4_6275_1.50.00.00_108_Ship.exe and, by enabling OBEX, it all works a treat.
Related
Has any one been successful in transferring their Phone book via bluetooth to the car's phone book? If so, can you please let me know how?
I have an Acura TL 2008 and it has this option but I cannot seem to transfer even one single contact via bluetooth to the car let alone a whole phone book. I can pair perfectly and make and receive phone calls.
I am using Vp3G's WM6 3.0 version and I have Tmobile USA with unlimited internet. For radio, I am using the latest 1.51.
Is it the limitation of the Hermes or limitation of the Bluetooth in the Hermes?
Thanks.
Shamim
It's definitely not a limitation of the Hermes... I can upload my contacts to car set via Bluetooth. I don't have an Acura though... sorry.
stpete111 said:
It's definitely not a limitation of the Hermes... I can upload my contacts to car set via Bluetooth. I don't have an Acura though... sorry.
Click to expand...
Click to collapse
If you right click a contact, do you get the option to send via bluetooth? I do not and am wondering if something needs to be set or turned on.
Thanks.
Use the Jeyo bluetooth software. It will most likely transfer all your stuff to your car with no problems.
http://www.jetwaremobile.com/
It will do SMS messages too. You can even set it to use a different MAPI store such as email. Although there is a character limit that makes it kind of useless.
I have an Audi with MMI and it transfers fine, there is a short delay though after starting it up till the phonebook is available
Bluetooth & Infiniti
I wonder if anyone has had any experience with this utility and a 2007 Infiniti G35x that has the nav / tech package. I can pair my HTC TyTN just fine and use the basic bluetooth functions. I can even send one contact entry at a time but haven't figured out how to send my entire phonebook. I wonder if this app will help.
Anyone have any experience with this phone / car combo?
Thanks everyone for the jetware info. I will give it a shot and reply.
Shamim
I bet it is a setting issue for the Acura. The Ford Sync system will ask, "Do you want to load phonebook?" right after it pairs...
It works - JETware Mobile Software
Upon suggestion from 'Diaftia' in this thread (THANK YOU!) I downloaded Hands-free Extension from JETware and installed it on my HTC TyTN. I then sat in my car and through the phonebook 'send' mode of the applet, I chose to send all 354 contact records to my car's phonebook via the bluetooth pairing. The car immediate showed 'downloading' at the appropriate time and viola! They were there.
I need to play with it some more to see if I can get more than the first phone number field to download. The Hands-free Extension app does allow you to pick only certain categorized phone records to be sent.
I've since purchased the utility and will explore more of its features! So far, so great! I've been looking for this solution for quite sometime!
Regards,
David
SteinyD said:
Upon suggestion from 'Diaftia' in this thread (THANK YOU!) I downloaded Hands-free Extension from JETware and installed it on my HTC TyTN. I then sat in my car and through the phonebook 'send' mode of the applet, I chose to send all 354 contact records to my car's phonebook via the bluetooth pairing. The car immediate showed 'downloading' at the appropriate time and viola! They were there.
I need to play with it some more to see if I can get more than the first phone number field to download. The Hands-free Extension app does allow you to pick only certain categorized phone records to be sent.
I've since purchased the utility and will explore more of its features! So far, so great! I've been looking for this solution for quite sometime!
Regards,
David
Click to expand...
Click to collapse
David,
I installed the software but did not see a Send option. I was able to select the categories on contacts that I wanted for the phonebook.
Where was the Send option? In the Jetware software or your car?
Thanks.
shamim
In the Extension software from the menu, go to phonebook options. In phonebook options select the categories that you wish to send to the phone. Press the 'menu' soft key option again. You will see 5 options, of which 'send contacts' is one of them. You will then get another set of options and finally a confirmation before it sends the records. Make sure your car or receiving device is set to receive before you finalize the send process.
SKassam said:
David,
I installed the software but did not see a Send option. I was able to select the categories on contacts that I wanted for the phonebook.
Where was the Send option? In the Jetware software or your car?
Thanks.
shamim
Click to expand...
Click to collapse
Same Problem with Pioneer
SteinyD said:
I wonder if anyone has had any experience with this utility and a 2007 Infiniti G35x that has the nav / tech package. I can pair my HTC TyTN just fine and use the basic bluetooth functions. I can even send one contact entry at a time but haven't figured out how to send my entire phonebook. I wonder if this app will help.
Anyone have any experience with this phone / car combo?
Click to expand...
Click to collapse
Well, I have experienced exactly the same problem with my Pioneer, I am able to send one by one contact to the car but I am not able to send the entire phonebook at once. When I try to do that then the bluetooth connection is getting disconnected and that is it. I wonder if that is a problem with the bluetooth driver,
I had a heck of a problem with importing to my new Audi A4 Pervertable, and worse it kept loosing connectivity then re-establisign it (mid song no less). Eventually fixed with BT Radio 1.50, (tried everything before it).
I don't know whether this is relevant or not. This is how I do it.
I have a Garmin Nuvi 610. When pairing the device with my Hermes all I have to do is make sure comm port service is enabled in the hermes bluetooth utility when asked for service type. If it's not enabled then there won't be any sharing of phonebook between them.
SKassam said:
Has any one been successful in transferring their Phone book via bluetooth to the car's phone book? If so, can you please let me know how?
I have an Acura TL 2008 and it has this option but I cannot seem to transfer even one single contact via bluetooth to the car let alone a whole phone book. I can pair perfectly and make and receive phone calls.
I am using Vp3G's WM6 3.0 version and I have Tmobile USA with unlimited internet. For radio, I am using the latest 1.51.
Is it the limitation of the Hermes or limitation of the Bluetooth in the Hermes?
Thanks.
Shamim
Click to expand...
Click to collapse
I currently use the JetWare Mobile extension ver 1.31 that I updated several days ago and now I can use Voice Command via bluetooth hear and give commands through the car stereo system.
I can also hear announcements of calls, emails via the stereo system. Sorry got off subject...
With this software I'm pretty sure that you will be able to upload your address book. I had no problem with 275+ contacts....
They have a free trial you could try to ensure that it works for you, but it's not free...
If memory serves me think it was about $15, well worth it if your a heavy BT user.
Here is the site: www.jetwaremobile.com
jac said:
I currently use the JetWare Mobile extension ver 1.31 that I updated several days ago and now I can use Voice Command via bluetooth hear and give commands through the car stereo system.
I can also hear announcements of calls, emails via the stereo system. Sorry got off subject...
With this software I'm pretty sure that you will be able to upload your address book. I had no problem with 275+ contacts....
They have a free trial you could try to ensure that it works for you, but it's not free...
If memory serves me think it was about $15, well worth it if your a heavy BT user.
Here is the site: www.jetwaremobile.com
Click to expand...
Click to collapse
Jac,
Thanks for the info. I already gave jetware a shot but it did not work for me. I do not get the "Send" option on my contacts or phonebook through Jetware or Outlook contacts on the TyTN. I am using Radio 1.51 and Jetware extension 1.31. If I got the Send option, it would work. For Voice command 1.6, do you use the option 'use bluetooth when available" or the option "use bluetooth only".
Thanks for being helpful.
Shamim
SKassam said:
Has any one been successful in transferring their Phone book via bluetooth to the car's phone book? If so, can you please let me know how?
I have an Acura TL 2008 and it has this option but I cannot seem to transfer even one single contact via bluetooth to the car let alone a whole phone book. I can pair perfectly and make and receive phone calls.
I am using Vp3G's WM6 3.0 version and I have Tmobile USA with unlimited internet. For radio, I am using the latest 1.51.
Is it the limitation of the Hermes or limitation of the Bluetooth in the Hermes?
Thanks.
Shamim
Click to expand...
Click to collapse
I have never had any problems with the phonebook transfers on Audi A4 (06) with any of the WM6 ROMS....even my ol' BlackJack now works with the WM6 ROM
SKassam said:
Jac,
Thanks for the info. I already gave jetware a shot but it did not work for me. I do not get the "Send" option on my contacts or phonebook through Jetware or Outlook contacts on the TyTN. I am using Radio 1.51 and Jetware extension 1.31. If I got the Send option, it would work. For Voice command 1.6, do you use the option 'use bluetooth when available" or the option "use bluetooth only".
Thanks for being helpful.
Shamim
Click to expand...
Click to collapse
Sorry to hear it didn't work for you...
I know in my case, it took me a couple times to figure out how to upload the the contacts to the car stereo using Jetware...
First time was: I did not go into... Hand-free Setting\Menu\Advanced Options\ And check off Phonebooks.
Second time was: I did not leave the car stereo phonebook settings "waiting to accept data" before I sent all the contacts from my PDA.
Any way back to your last question "About VoiceCommand 1.6" I use the setting "Announce notifications using Bluetooth hands free only"....
Thanks,
Good luck on your quest...
I've been struggling for several months now to get my MDAC III working with my built-in car Bluetooth hands-free. The full details are below, but in short, I'm told that the system seems to work OK with Wizard, and I'm wondering what about the Wizard could be different to the Artemis (Bluetooth stack perhaps?), and if there is a difference, is there anything I can do about it?
The full issue: The system I'm trying to connect with is in a Land Rover Freelander 2 (LR2 in the US) Initial pairing was a bit hit and miss, but now I've got the the phone paired with the PTI, that's not a problem and they automatically pair whenever I start the car.
I can succesfully initiate or answer a call from the car, but the call itself isn't routed through the car's speakers/mic, it just goes through the phone as normal. However, once in a call if I select the "privacy" option on the PTI (which would normally have the effect I've already got of passing the call to the phone), and then select the "hands free" option, it does what it should and routes the call through the car. Effectively, it's as if the system starts in "privacy" mode rather than "hands free". Once I've done this once, subsequent calls work fine, routing straight through the car, but only until the ignition's turned off. The next time I start the car up I'm still paired, but calls go through the phone again.
If anyone's got any suggestions, I'd really appreciate them.
Thanks!
Try this
Had similar in a BMW...
Try www.jetwaremobile.com
Thanks, did try that but didn't seem to help, it seemed to be more geared towards additional functions like phonebook syncing rather than just getting a working connection in the first place. Maybe I'll give it another go.
Same Probleme On 207
hi,
I have the same ....
I precise that work fine with the original m650 rom, i search many hours but i found nothing, i try bluetooth toggle with no effect...
please help us !
thank for dev for everything they do !
RE
I try many combinaison so:
if i want to use my bt car kit, i'm forced to validate hands free option at every phone call...
I think it's btaudiotoggle the cause of mly problem, he is included in the aje rom...
you think it's possible ?
TangerineTractor said:
Had similar in a BMW...
Try www.jetwaremobile.com
Click to expand...
Click to collapse
Thanks TangerineTractor!
I fixed the problem I have with car kit of OPEL ANTARA using the software you said. It works disable sending Phonebooks.
I am having a similar problem with Wizard Mobile 6 cooked ROM. Before with the official O2 ROM on my Xda Mini S, it worked fine. The car would automatically recognise the phone whenever in proximity, and all calls would go through the speaker.
Now, I have to press the car kit's button (Nokia Bluetooth) each time I get in the car, to tell it to search for devices - i.e. the phone doesn't automatically announce its presence.
So, is there a different Bluetooth Stack we can try?
My Orbit works fine with my Nokia CK-7W using a B&B ROM.
Thanks, and yep that's the same car kit I have.
When you get in the car, do you have to do anything, or does the car kit automatically detect the phone? Mine doesn't since getting the Wizard Mobile 6 cooked ROM.
Do you know what Bluetooth Stack you use, and if I can download it anywhere for the Wizard?
No, just switch on the ignition key and away it goes. Also if the car kit is set as the default hands free if the phone rings it should try to connect to the car kit.
The radio I am using is 2.95.90 I have no idea what bluetooth stack it is, Tom Codin cooked the ROM, he will know.
Okay thanks. Does anyone know if the BT Stack is part of the Radio ROM? If so I'll just try a different Radio ROM.
Hello xda community!
I have a huge problem with my Hermes using Shaps Roms (latest), besides I tried all of the roms till now, and bluetooth devices!
I tried 3 devices till now:
Parrot 3200
Audi UHV
and a Sennheiser VMX 100 ear- handsfree
so first I had problems with the Audi to get a stable BT transmission without disconnect which is solved due to a rom change!
Now the problem is with picking up, or dialing.
For example BT -> Audi UHV connected!
Using phonebook to dial a number -> dialing ... it displays in the Audi -> Dialing.. and when the connection is established its shoud says connected like in phone but sometimes just shows "Hanging up.." -> while the Hermes display says connected!
And I am definitly connected to the person but I cant hear anything not on the phone or the BT Kit!
This is extremly anoying -> and not only withe the Audi, even the simple Sennheiser earphone there is exactly the same problem! or the Parrot!
The phone is not able to send correct "commands" Pick UP -> Connected -> Disconnected. I mean THIS IS A HORROR!
Its not a permanent error but it it shows quite often (6 tomes out of 10 calls) up it does it again and again till sofot reset!
Please someone help me !!!!!
PS i also tried Jetware Mobile same problem no difference ....
Greets,
fire
Out of interest, try my ROM and see if this works. I use bluetooth dialing on a car kit and it works fine for me...
CRCinAU said:
Out of interest, try my ROM and see if this works. I use bluetooth dialing on a car kit and it works fine for me...
Click to expand...
Click to collapse
ok, i will give ot a try - first without jhetware mobile and with it!
Is this problem typical or known or just affects me?
Not to sure - although I install a certain version of the BT kit that may affect your issue. I don't know if it will fix it, however I would be interested to see your results.
firefoxy said:
ok, i will give ot a try - first without jhetware mobile and with it!
Is this problem typical or known or just affects me?
Click to expand...
Click to collapse
I have used a number of Schaps ROMS and others, and I have never had a problem making or receiving calls through my car kit (a Ford).
Having said that, I have had probelms getting the car kit to access my contacts on most of them, but Schaps latest ROM worked 'straight out of the box' in every respect.
Hissing Syd said:
I have used a number of Schaps ROMS and others, and I have never had a problem making or receiving calls through my car kit (a Ford).
Having said that, I have had probelms getting the car kit to access my contacts on most of them, but Schaps latest ROM worked 'straight out of the box' in every respect.
Click to expand...
Click to collapse
interesting.. so if you dial a number the tytn sends to your ford the correct status of the calling process ?
start - call - stop ?
never had such issue:
Ford: start - stop
Hermes: start - call ...
silence on both ?
CRCinAU said:
Not to sure - although I install a certain version of the BT kit that may affect your issue. I don't know if it will fix it, however I would be interested to see your results.
Click to expand...
Click to collapse
First results:
15 minutes it works like a charm - no phonebook entries just the plain rom.
now I ll snyc with outlook and start another test!
* Stange thing is that the Audi UHV found my phonebook entries although i dind´t snyced them. Sim is empy ...
can there be something in extended rom ?
Sounds like it uses BT SAP to access the contacts on the phone. I haven't built the ROM with that in it - as I haven't until now come up with a device that actually uses SAP!
Maybe try doing a search to see if you can find a cab for BT SAP and see if that helps?
CRCinAU said:
Sounds like it uses BT SAP to access the contacts on the phone. I haven't built the ROM with that in it - as I haven't until now come up with a device that actually uses SAP!
Maybe try doing a search to see if you can find a cab for BT SAP and see if that helps?
Click to expand...
Click to collapse
First of all thanks for all the replies!!
The Audi UHV is capable to use rSAP, but I have no idea what it does and what it´s good for.
What is the difference between SAP and HFP ? I have nothing on the sim card.
Now you're getting a bit beyond my knowledge as I don't have any of these systems to test or experiment with
+1
I have had the same problems with multiple ROMs.
Trying to link a Garmin GPS, and other Hands Free devices.
Seems like a Hermes thing rather than the ROMs.
Try deleting the BT device from the Hermes, but not the device. Re-sync from the device.
Not sure if that will help, but I had weird BT problems with the 4.30 rom and that fixed it. No problems at all with the 4.31 though.
I will start some testing today and report back tonight!
Maybe it was the rsap being enabled in Shaps roms .... we will see!
The question is, should I install Jetware Mobile or not ?
It seems to be faster in syncing if I have it installed.
So far I tested it yesterday for half an hour and it worked!
I have installed the Faria ROM on my Hermes and I can tell I am quite happy with it. Only thing I can't get to work is to use my Hermes with my AUDI built in handsfree carkit. I am able to get connected with it and I am also able to do phone calls, only thing is that there is no access to my phonebook, I also have tried to set the bluetooth to allow remot sim access, but still doesn't work. Does anybody know if there is a nweer bluetooth driver out there? Will be happy for any suggestion.
Thanks
Duke
I have Chryslers U-Connect and it accesses my phonebook I put into U-Connect. when connected , I have never been able to access my phonebook from my phone.
@pumpiron, sorry for the silly question, but what is U-connect and where would I get that from?
It comes with Chrysler Products. Check it out...http://www.jeep.com/crossbrand/uconnect/jeep/interface.html
Sorry to bring up this oldie, but I am now having this issue when trying to connect my bluetooth to my Kenwood radio. Downloading is extremely slow. These are the things I used to be able to do before I flash my Hermes with a new WinMo 6.5 ROM:
1. Dial a number through the radio. I now have to dial from the phone.
2. Calls log is not being downloaded. The only thing that shows up is the contacts list.
3. Simultaneous actions. Before the flash I used to be able to dial a number while information was being taken from the phone to the radio. This is no longer the case. I have to wait until info is downloaded before being able to make a call. This also prevents me from answering incoming calls.
Is there anyway to check what version of bluetooth (if any) is on the phone or if there's some type of upgrade?
Appreciate any help.
I currently have a Diamond and TP2 with stock ROM's.
Diamond worked perfect with carkit untill i performed major ROM upgrade from htc.com. now it will connect and not reconnect on either device or carkit restart.
My TP2 behaves EXACTLY the same - connects and drops after either restarting. when connected it works fine - voice/dialing etc etc.
My car kit is a JVC KS-BTA200 connected to my KW-AVX810 head unit.
i've read all comments on google/xda's etc - well almost all! to no avail.
the devices are all set to visible obviously and all paired. ive read that a registry edit possibly fixes the issue but my TP2 & Diamond dont have the required reg strings. (that i can find!!)
i have the remote registry tool installed on my Desktop - so im ready to make changes!
please, if anyone can help i will very grateful!!
radak23 said:
I currently have a Diamond and TP2 with stock ROM's.
Diamond worked perfect with carkit untill i performed major ROM upgrade from htc.com. now it will connect and not reconnect on either device or carkit restart.
My TP2 behaves EXACTLY the same - connects and drops after either restarting. when connected it works fine - voice/dialing etc etc.
My car kit is a JVC KS-BTA200 connected to my KW-AVX810 head unit.
i've read all comments on google/xda's etc - well almost all! to no avail.
the devices are all set to visible obviously and all paired. ive read that a registry edit possibly fixes the issue but my TP2 & Diamond dont have the required reg strings. (that i can find!!)
i have the remote registry tool installed on my Desktop - so im ready to make changes!
please, if anyone can help i will very grateful!!
Click to expand...
Click to collapse
Hi, I am using my Touch Pro 2 with the same HU and Bluetooth adaptor as you but no such problem so far.
It used to have this problem then I try to connect using Window CE as the phone setup and choose another Connection Key instead of default 0000 to pair the phone with the HU.
ok, well i just tried connecting via searching for the device from the HU. it finds my device - i tap enter (to connect on HU) then it just jumps to a blue flashing 'connecting' then goes to a yellow 'error' straight away. if i select 'open' on the HU then it connects (connecting with a different ID - a number '6') but only untill i restart the HU.
also as a test i just tried an Xperia (just had one laying around LOL) and it does the exact same as mine!! ARRRRGHHH!
so im glad to say i believe it is not an HTC issue!
ok so i have an update - the problem is my HU will not pair correctly and it will not store a pairing. great.
another quick one - have found others are having trouble with their HU/adapters. thanks anyway everyone!
TP2 Bluetooth and voice dialing working fine ???
Have you tried to reset your carkit? I had the same problem after the rom-update with my TP1 and I put my carkit (Bury CC9060) back to factory settings. So I did the same this morning after I updated my TP2 and now it works just like a charm. Of course I don't know if your carkit has this possibility. Good luck, greetz Ton
'iznogoooog' - yes it work perfectly until you restart either device - 'ton66' - unfortunatley a reset is pretty much all i can do!!! eeeeek!
hopefully a reset will fix it! - i did unplug my b/tooth adapter then switch the unit on - then off then plug it back in.. didnt change anything.. oh well! will do complete re-set 2day!
BTW:
thanks so much for everyones help!
Got a questions. I am using the AVX-826 with build in Bluetooh. I want to know if you guys get the Signal Strength show on your Head unit is correct. on my unit pair with TP2. The Signal Strength indicator doesn't move. it always show the strength with my phone is connected to the unit and it stay that way.
The Battery Strength indicator does work and show the correct battery level.
I have exactly the same prob!
Hi,
I have a AXV800 and a BTA200.
My first device was a Artemis with WM6.0. No problem so far!
Then I changend to a Diamond with WM 6.1 and had the same problem as mentioned before. Now I tried my new TP2 and still the same problem.
And I tried the old Artemis again with a new 6.1 ROM and the same problem as on the other two phones.
Now I think it depends on the WM build. 6.0 seems to work 6.1 not!!!!!!!!!!
I did a reset on my AVX800 two times without luck!
I think I'm going to use a normal phone without Windows mobile for the next test!
Schelbi.