Device bricked? - Touch Pro2, Tilt 2 Windows Mobile General

Hi,
I have a Touch Pro2 was flashing custom roms yesterday and after doing a task 29, the device is stuck in bootloader mode. When I flashed a rom either custom or shipped, the screen stays on 0%.
Edit for update : Phone is working again! Don't know how but it just flashed today!! I think I have tried at least 70-100 times before it decides to start flashing!!

Anyone can help to restore my phone, please? I'm really desperate

You tried going into the bootloader, plugin your usb and flash true your pc?

Yes, already tried several times to flash on 2 computers and 1 laptop but screen stayed at 0%. I assume that the problem does not come from the usb cable or the computer, but in the bootloader itself?

Related

Stuck in Bootloader Problem.

A fishy problem.
I'm stuck in bootloader when I restart the phone.
If I rest the phone for a couple of hours i starts as it should, but if i restart it will come into the bootloader and is stuk there.
I can restart as many times as I would like but still stuck. I cannot Hard reset since restarting means I'm in bootloader.
I have managed to connect it to USB port. Performing Task29 with MTTY.
I have reflashed simplicity:s ROM after task 29 with no luck. Still stuck in Bootloader when restarting. then I have to wait for 2 hour with battery disconnected and the phone can start.
anyone who knows how to fix this problem?
thanks
/Ulf
Try flashin a different rom.. go into the bootloader do a task 29, hold volume down after it finishes, but b4 it boots up to get into bootloader again them flash a rom..
Sent from my SPH-M910
Hi
Go www.htc.com, select your country (IMPORTANT STEP!!!), find downloads (should be somewhere at support), download official ROM (it require P/N code, you can find it under battery, important for check ROM compatibility), flash. Should work.
Hi guys thanks for input. I tried both of your solution, but it failed. I now have the official ROM (but not official Hard SPL) And I still have the same issue.
Anything else I can try with?
Look for locking up precedure and go to the vendor if the phone ha warranty.

[Q] Battery charges only when on?? NO MTP?

Device: Rogers SGH i747M Android 4.1.2 Rooted with CWM Recovery and AxisM ROM
Problem 1: Phone charges when device is on, when device is off constant vibrate cycle.
Problem 2: Can't connect Phone to PC..
Problem 3: When phone is on and charging and i remove charger the phone still says charging for about 30 seconds. So there is a 30 second or so delay after the phone realizes i unplugged it.
I had my phone rooted for a while now and it's been working perfect. Up until i removed the stock ROM and installed the cyanogenmod for at&t. Once i removed my stock ROM the problems began. I have attempted to use 5 different roms all same problem. I have tried 4 different USB cables, 3 different computers.. I have a second device that's a duplicate that works perfectly fine with the exact same rooting technique, same recovery version, had the same ROM. One works perfect other is sick with this new disease.
Any ideas and help guys?
Fizzy1337 said:
Device: Rogers SGH i747M Android 4.1.2 Rooted with CWM Recovery and AxisM ROM
Problem 1: Phone charges when device is on, when device is off constant vibrate cycle.
Problem 2: Can't connect Phone to PC..
Problem 3: When phone is on and charging and i remove charger the phone still says charging for about 30 seconds. So there is a 30 second or so delay after the phone realizes i unplugged it.
I had my phone rooted for a while now and it's been working perfect. Up until i removed the stock ROM and installed the cyanogenmod for at&t. Once i removed my stock ROM the problems began. I have attempted to use 5 different roms all same problem. I have tried 4 different USB cables, 3 different computers.. I have a second device that's a duplicate that works perfectly fine with the exact same rooting technique, same recovery version, had the same ROM. One works perfect other is sick with this new disease.
Any ideas and help guys?
Click to expand...
Click to collapse
At this point, I'd probably try flashing stock and doing a factory reset (backup your stuff first). Start fresh from there. If the issues persist, might wanna get a replacement but my guess is that starting fresh should fix w/e is going wrong.
Once you've tested fresh stock ROM, go ahead and try flashing/rooting to see if the problem comes back.

Find 7a won't boot to recovery, not recognised in USB at all

Hi all,
I'm turning to forums now because I'm desperately in need of help.
I have an Oppo Find 7a which I bought about 9 months ago. When I first got it I tried flashing Cyanogenmod to it (unsuccessfully), and then tried rooting the phone. I have since unrooted the phone, and am running Color OS v 1.2.5i and really really need to update. Problem is, I cannot seem to update the operating system. Here's what happens:
Phone fails to boot to recovery
In my attempts to install Cyanogenmod, I installed a custom recovery. However I couldn't get Cyanogenmod to flash properly, so I tried reverting to the stock recovery. Did that, which seemed to work fine. However, since rooting and unrooting my phone, I cannot boot into reocovery at all. When turning off the phone and then pressing power+volume down to try and boot in, the "OPPO" logo comes up as if trying to boot into recovery, then the phone just turns off and boots into normal OS. Have tried many things but can't seem to get into recovery at all. This means that when an OS update is detected (which it is), the phone tries to reboot into recovery to install the update and cannot. So I'm stuck on a very buggy OS and can't do anything to update. Before you suggest adb+fastboot solutions, please read below:
Phone not recognised in PC at all
When plugging the phone into a PC via usb cable literally nothing happens (aside from the phone detecting it is charging). The phone does not mount as a volume in Windows, the phone is not detected as a device in device manager, as far as the computer is concerned, the phone is not even there. I have tried having the phone plugged in and installing all the proper adb drivers, but this has still yielded no results. And yes USB debugging is definitely enabled on the phone. I don't know why, but for some reason I literally cannot plug my phone into a PC anymore which limits me a LOT in terms of fixing the problem above.
Basically I really need to update the OS on this phone and am compeltely stuck: nothing seems to work. Can anyone help me out here. What do I need to do?? Any help is greatly appreciated.
seem adb device in windows device manager when the phone plug USB at bootloader?
if yes, you can use adb+fastboot solution

Help please, stuck on boot loop and have tried tons of options with no luck

I have a Sprint Samsung Galaxy Note 2. I tried to root it and while it was in download mode finishing up, the phone dropped and got unplugged! Now the phone wont even boot up. It just gets stuck on the Samsung logo and it stays on the logo for a few seconds and then disappears and shows the logo again. It just does that over and over. I've downloaded stock firmware so I can use odin and flash it back. I went into download mode and connected the usb cable, but odin does not find my device. Can someone please help me out with this, I'm absolutely lost on this. I've tried to do research for more than 6 hours with no luck.
Also, I already have the correct driver's on my computer. I have no idea what to do, can someone please please help!!!!
Update problem solved!
Just wanted to provide a update in case someone else has the same problem.
I've tried several different cables and different usb ports until my computer did detect the phone. Flashed a stock rom and it fixed everything! Then went on and rooted the phone properly. I would like to thank Josh Beach for the help!

HELP! (sm g532m) pc doesn't recognize device, can't enter recovery mode either.

Hi everyone.
so, I'm new to this world of roms, but i've been playing with a samsung sm- g532m, is an old phone, don't use it anymore.
i've installed many roms in this phone with twrp and gone back to stock rom with odin, and until now everything went fine.
I installed the lineage 14.1 for this model, and it went smooth, it charged to the logo, then to the first settings, but after maybe 1 minute it restarts itself, and i have to do the same. no matter how fast i try to do that, when it's supposed to set everything, it restarts.
i've tried using odin but the pc doesn't recognise the device. it's not the usb cable, because i've used it with other phones and there's no problem.
i've tried goind to recovery mode, hard reset but nothing, the android logo the green thing doesn't show, it just start the phone to the lineage logo.
When i installed the rom with twrp, i checked that it would install the twrp...like i said, i'm new. don't know what went wrong.
I thank you guys in advance, and hope you can help me.
shimatta_cosha said:
Hi everyone.
so, I'm new to this world of roms, but i've been playing with a samsung sm- g532m, is an old phone, don't use it anymore.
i've installed many roms in this phone with twrp and gone back to stock rom with odin, and until now everything went fine.
I installed the lineage 14.1 for this model, and it went smooth, it charged to the logo, then to the first settings, but after maybe 1 minute it restarts itself, and i have to do the same. no matter how fast i try to do that, when it's supposed to set everything, it restarts.
i've tried using odin but the pc doesn't recognise the device. it's not the usb cable, because i've used it with other phones and there's no problem.
i've tried goind to recovery mode, hard reset but nothing, the android logo the green thing doesn't show, it just start the phone to the lineage logo.
When i installed the rom with twrp, i checked that it would install the twrp...like i said, i'm new. don't know what went wrong.
I thank you guys in advance, and hope you can help me.
Click to expand...
Click to collapse
Did you follow the patching to not make it crashes every 90 seconds? That sounds like one.
Also, if you want to boot recovery from OS, install ADB on computer and do these quickly
> let it boot and unlock screen
> plug in USB and turn on file transfer
> on PC: adb reboot recovery

Categories

Resources