Stuck in Bootloader Problem. - Touch Pro2, Tilt 2 Windows Mobile General

A fishy problem.
I'm stuck in bootloader when I restart the phone.
If I rest the phone for a couple of hours i starts as it should, but if i restart it will come into the bootloader and is stuk there.
I can restart as many times as I would like but still stuck. I cannot Hard reset since restarting means I'm in bootloader.
I have managed to connect it to USB port. Performing Task29 with MTTY.
I have reflashed simplicity:s ROM after task 29 with no luck. Still stuck in Bootloader when restarting. then I have to wait for 2 hour with battery disconnected and the phone can start.
anyone who knows how to fix this problem?
thanks
/Ulf

Try flashin a different rom.. go into the bootloader do a task 29, hold volume down after it finishes, but b4 it boots up to get into bootloader again them flash a rom..
Sent from my SPH-M910

Hi
Go www.htc.com, select your country (IMPORTANT STEP!!!), find downloads (should be somewhere at support), download official ROM (it require P/N code, you can find it under battery, important for check ROM compatibility), flash. Should work.

Hi guys thanks for input. I tried both of your solution, but it failed. I now have the official ROM (but not official Hard SPL) And I still have the same issue.
Anything else I can try with?

Look for locking up precedure and go to the vendor if the phone ha warranty.

Related

can't get out of bootloader, hard-reset returns back to bootloader

Hello,
I've got a problem with my bootloader. I can't get out of it.
Flasht my device with a new rom, did a hard reset pressed the 0 and got the clearing message.
After that the screen goes back the bootloader serial screen, or the USB if the cable is connected.
I've read something about the a newer radio rom that doesn't work and that i've got to flash the old 10600 again, only prob is I ain't got the 10600 radio rom.
So can someone help me, or give an alternative for this problem.
Thanks
found it already, with mtty setting the bootloader to boot (set 14 0) and the problem was solved.

Please help!!

i just loaded a new rom onto my diamond. after installation the phone turns on and displays touch diamond then sits there for about 20 seconds then reboots. its keeps doing it. what can i do?!! ive tried loading another rom but it seems to keep doing it.
When you put you phone into bootmode, does it still restart then?
And have you tried a hard-reset?
it did stay in boot mode, but once i loaded a new rom it did the same thing. i had to load a couple roms before it stuck and started working. thanks for your help.
bigk05 said:
i just loaded a new rom onto my diamond. after installation the phone turns on and displays touch diamond then sits there for about 20 seconds then reboots. its keeps doing it. what can i do?!! ive tried loading another rom but it seems to keep doing it.
Click to expand...
Click to collapse
Maybe this link will help to solve the problem: http://forum.xda-developers.com/showpost.php?p=3433851&postcount=22
Option 2:
If the link above method doesn't work for you, then just simply but your device into bootloader and flash a stock ROM then go back to a cooked ROM and everything she be ok.
Go Here to Find Stock Roms It doesn't matter which one you chose as the goal here is to remove the bloated ROM which happens from too many flashes.
hi, i know this post is a little old but MY DIAMOND IS DOING THE SAME EXACT THING!
i just started leaerning how to do all this, and the only HardSPL that worked on my phone was 1.24.
i updated to that spl, then i upgraded the radio but when i did the rom flashing event i am left with a messed up phone, resulting in only turning on and off, not getting past the touch diamond screen.
PLEASE HELP ME.
Guide to completely restore your messed up device
This little guide is made for newbies who are stuck after flashing images in a wrong way or flashing wrong things.
Note: This is only for GSM Touch Diamond!
This Guide does not include the MTTY Procedure!!
Q. What does this mean?
A. Well, if you are still facing some problems after following this guide, it's time to use MTTY.
Q. what is MTTY?
A. It's a flashing procedure before flashing a ROM, it actually formats your phone (you internal storage will not be lost) and then you are able to flash a ROM.
Q. When do I have to use MTTY?
A. You have to use it before every ROM flash. Before you proceed with step 14, you must read this! It's the only step you need to do it, except for the latest cutsom ROM flash.
Perform a hard-reset (Hold Center button + reset)
Go into bootloader mode by holding volume down and pressing the red reset button
A red-green-blue-white screen will appear. In the white part of the screen, there should be the word 'Serial'
Connect your phone to the computer.
If the word 'Serial' changes into 'USB', you succesfully connected your phone
Go to this link and download 'Unsigned-Hard-SPL-Diamond-OliNex.zip'
Extract it to an empty folder.
Run RomUpdateUtility.exe, make sure your phone is still connected
Follow the steps, check device for prompts after PC shows loading bar. it should go to black screen now.
SPL flashes, device automatically reboots, job done.
to confirm you got it installed, go into bootloader mode and verify the screen shows 1.40.OliNex.
note: you will not see the SPL version during normal boot, that is the OS version, not SPL!
Now you have re-flashed Hard-SPL, it's time to flash a stock ROM.
Make sure your phone is connected again
Download a stock rom (ie from here) and run the executable.
Follow the instructions, and be patient.
You're done now. You are now able to flash a custom ROM of your choice.
If you can't get your device to work, not my problem! If this didn't help your device is bricked. You'll have to return it to HTC.
And of course I am not responsible for any trouble you get with this guide.
Don't you understand some steps or do you still need help?
Try reading this. It is a great tutorial about flashing your device including the MTTY procedure.
If you still can't get a clue of it don't hestitate to PM me!
You can also add me to msn, see the msn icon to the right of my post.
when i tried to upgrade to 'Unsigned-Hard-SPL-Diamond-OliNex.zip' the progress bar on my phone and the computer go up to 100% in less than 2seconds, then it says 'error [270]: update error
the image file is corrupted. please check your update utility'
And on my devices bootloader screen it says 'upgrade ROM code error please try again'
devyn_ciara said:
when i tried to upgrade to 'Unsigned-Hard-SPL-Diamond-OliNex.zip' the progress bar on my phone and the computer go up to 100% in less than 2seconds, then it says 'error [270]: update error
the image file is corrupted. please check your update utility'
And on my devices bootloader screen it says 'upgrade ROM code error please try again'
Click to expand...
Click to collapse
Are you using Vista? If so, try it on another computer
Another problem could be that the package is corrupted. Try downloading it again.

[Q] defy bricked - can't get in recovery mode

first, excuse me for the english. ok, i installed the cyanogenmod and then i wiped the memory and the cash because i wanted to give the defy to other person.
so i installed the cyanogenmod from the card - the stable version or something similar - and that was all. the phone get stuck on the motorola logo, and can't get in recovery mode, only have the bootloader, and tried to install different ROMs, but the result is always the same - it can't boot and get stuck on the logo.
anyone can help me, please?
i did have the same did u soulve that proplem man !?
nope, i'm trying almost every advice that i can find in the net, but still no results.
hopefuly someone here can help to solve this issue.
What is the EXACT ROM you flashed at first, and what are the others you tried flashing?
Can you get to stock recovery?
Go into bootloader, plug in your phone, use rsd lite to flash an .sbf.
Edit-
If its stuck still, try now to enter recovery, clear cache, then factory reset. Happened to me when i tried to install CM7 from stock 2.2
this should get it stock again.
-Dhero
@iYossi i flashed JRDNEM_U3_3.4.2_177-005_NORDIC_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTNORD_P003_A001_HWp3_Service1FF then i tried the same and few others.
and no, i can't get to stock recovery i have access only to the bootloader. when i flash a ROM with RSD (the latest version) it get fine until the moment it tries to boot, then the RSD tell me that i have to boot the phone manualy and then it stuck and go to nowhere
@dyinghero27 i can't enter into recovery.
No, not recovery, load bootloader, flash with the newest stock sbf (think I seen 3.4.4 in Dev forum)
Edit* just like I suspected, I'm pretty sure your having problems with downgrading, you need to flash the newest sbf.
i6x said:
@iYossi i flashed JRDNEM_U3_3.4.2_177-005_NORDIC_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTNORD_P003_A001_HWp3_Service1FF then i tried the same and few others.
and no, i can't get to stock recovery i have access only to the bootloader. when i flash a ROM with RSD (the latest version) it get fine until the moment it tries to boot, then the RSD tell me that i have to boot the phone manualy and then it stuck and go to nowhere
@dyinghero27 i can't enter into recovery.
Click to expand...
Click to collapse
When it tells you boot manually, push the power button
dyinghero27 said:
When it tells you boot manually, push the power button
Click to expand...
Click to collapse
that is what i did but nothing happens.
i'll try the newest version you saw and will post the result.
ty!
now i have other problem, i downloaded the lates fbs but when i tried to enter in bootloader mode there were the message saying "the battery is low ... can not program" and then it shutdown. now i'm trying to charge the battery but i'm afraid it can't because of the issue i have.
i6x said:
now i have other problem, i downloaded the lates fbs but when i tried to enter in bootloader mode there were the message saying "the battery is low ... can not program" and then it shutdown. now i'm trying to charge the battery but i'm afraid it can't because of the issue i have.
Click to expand...
Click to collapse
anybody has an idea what i can do?
I have the same problem, if I put the battery in a cel from a friend and let's take a charge, until I make time for the 2.2, then I put it loads to 2.2 in normal outlet ....
but I'm still the problem with the Motorola logo, so I can enter the bootloader, I can not get into recovery, do not know what to do ...
sorry for bad english
so i installed a lot of different versions on the defy and the result is the same, the phone get' stuck on the motorola logo. can anyone help me, please?
ok i tried a version that seems to work but now the display doesn't start. i have the defy connexted via usb and when i push the power button it connect/disconnect to the pc but the display remains off.
why i think that this version seems to work? because when i flash it to the defy it reboot the phone and says pass. the other versions stucks on reboot and the RSD says that i have to reboot manualy but the phone stucks on the motorola logo.
anyone have an idea, why the display is off. when i try to flash the phone i have no problems.
Err
Sent from my MB525 using xda premium
Hmm, sure you have the right sbf and it didn't corrupt in download? Also do you gave the latest Motorola drivers, if so even uninstalling and reinstalling them might help. The other thing I can think of is a virus or an antivirus that could be interfering?
Sent from my DROID2 using xda premium
i´m not sure if i have installed the right sbf, because i tried various and only this one seems to work ... partly. the others stuck on the motorola logo when RSD try to restart them, after the install. i suspect that this has to do with my empty battery.
i´ve cutted an usb cable and connected the red and the black wire directly to the pins, because i had the "the battery is low ... cannot program" problem, but i'm not sure if this is sufficient to get it back again.

bricked or not bricked

hi guys, following this giude ( http://forum.xda-developers.com/showthread.php?p=20365299#post20365299) now, my dhd won't start. After flashing in bootloader mode, pd98img, phone ask to me to restart, then 3 minutes of vibration before start. I decided then, after booting, to install update proposed by HTC in software update;then the phone locks in the update screen without moving forward.What can I do now?tnxx.... can't access to bootloader
I'm not really clear on what you were trying to do here... You've gone through the process of downgrading to an older software version (seemingly successfully), then as soon as you've booted you've tried to upgrade back to where you were before you started?
Have you tried pulling the battery and then trying to boot into bootloader? Does adb recognise the device?

HELP PLEASE.Is there a way to flash or root AT&T Note 5,stuck in boot loop mode???

HELP PLEASE.Is there a way to flash or root AT&T Note 5,stuck in boot loop mode???
Hi to all
I'm member on XDA for a long time,but I really am a newbie considering rooting,flashing and messing with the phones.
Yesterday ,my At&t Samsung galaxy NOTE 5 restarted by itself and started doing that constantly.Maybe because the memory was almost full so the firmware didn't have enough space to run correctly ,I don't really know.
So I decided to do a FACTORY RESET in order to refresh the phone.I backed all up (it did restart few time while I did that but I managed to finish it).
After I did the factory reset and wiped the cache,I rebooted the phone and that is when the boot loop started.
Once or three times came back and started the phone up to the first settings (I managed to put in my google username e.t.c. but after a minute maybe it freezes and restarted by itself again)
I tried again another factory reset but the boot loop continues.I tried many time to turn it off,it restarted up to INSTALLING UPDATE......then tried to turn it off completely (Volume down+Power+Home button) and somehow I managed to turn it off.
I thought that I can come here and find the instructions on how to FLASH it with ODIN,but I couldn't find the stock firmware for AT&t Note 5.
Then I remembered (and read on internet) that the bootloader on AT&T phones is locked !!!!!
I searched some threads here for at least how to root it ,but I can't find anything clearly.
So I'm asking you for help: IS THERE ANY SAFE WAY THAT I CAN DO FLASH OR ROOT MY AT&T SAMSUNG NOTE 5 (EXPLAINED STEP BY STEP) IN ORDER TO MAKE MY PHONE WORK AGAIN????
I have never before messed with the phone.It has the original stock firmware Android 7.0 Nougat.
And the phone is bought in USA,but I live in EUROPE and have unlocked it ,by buying some code online, few years ago.It was working fine until yesterday.
Thank you in advance guys I hope that someone might help me.
Juno 106
Guys I found here some older version (few months older) of Android 7 for my Note 5 and I managed to do a flash. The flashing went OK I went through settings and after few minutes the phone freezes again and restarts. And then again the same,it works fine for a few minutes,freezes and restarts (I can here the camera working inside sometimes too)...........CAN ANYONE HELP ME REPAIR MY PHONE ,PLEASE ???
Hi again
I don't know why no one is replying to me???
Today I managed to make the settings and power up the phone,restored the back up....the phone is working,BUT the PROBLEM is that it constantly freezes and reboots by itself.Sometimes it works for few minutes and reboots,sometimes it works for 30min and then it reboots,sometimes longer...
What might be the problem? Is it some hardware problem processor ,memory or maybe bad battery? It is older model and I have noticed with Accu Battery that most likely the battery haslowered it's capacity.It drains faster,sometimes when it comes to 15% it drains very fast...
Can anyone help me diagnose the problem?
Thank you in advance
Try booting into Download Mode & flash a new stock firmware if all else fails, assuming u tried a factory reset first with no satisfaction. Guides are everywhere. I HTH
PiMPSoFT said:
Try booting into Download Mode & flash a new stock firmware if all else fails, assuming u tried a factory reset first with no satisfaction. Guides are everywhere. I HTH
Click to expand...
Click to collapse
Thank you for your reply
I managed to flash the firmware few times,but the phone keeps freezing after some time and restarts.Sometimes it is stuck in the bootloop,sometimes it starts up to some point,freezes and restarts.
Could it be BAD BATTERY or is it something else?
If it is the battery problem,I will replace it,but I'm afraid that it might be someting else wrong.
What is your opinion?

Categories

Resources