Develop Bugs

Can't get Copilot working with Villain 3.3

Sry - if its not the right section for my question !! Please move if it is so.
Have flashed the new Villain 3.3 ROM thanks - i like it
But one Question - is it possible to get copilot working with it ? Walking through installation without problems. But when I start Copilot it says something like:
The system couldn't load Copilot-Code
What I'm doing wrong - or is Copilot not compatibel with Android 2.1 ? Please help

use Ndrive

I think - I will test another ROM. Thanks for ur advice !

copilot is not compatible with android 2.0

pina_ said:
copilot is not compatible with android 2.0
Click to expand...
Click to collapse
That's not the point as we're talking about 2.1. But anyway, I think you're wrong: my version of CoPilot works flawlessly on my HeroDroid-Rom (which is built on the same Eris leak as Villain).
So, maybe it's a specific problem with Villain, but definitely not with Android 2.1

Thanks for your answere - I will try to get it work - however ... btw which Copilot Version do you use ?

I'm using iGo, which runs great on 3.3 and is a better navigation system in my opinion.

spunkey said:
Thanks for your answere - I will try to get it work - however ... btw which Copilot Version do you use ?
Click to expand...
Click to collapse
CoPilot 8 from the Market (Full EU). Bought it under the old 1.5-Rom version, made a backup with Titanium Backup and restored it under Android 2.1.

It says on their site that they have Nexus support, so it should work in 2.1. You may have to update to the latest version though.

spunkey said:
What I'm doing wrong - or is Copilot not compatibel with Android 2.1 ? Please help
Click to expand...
Click to collapse
I have no problems with Copilot under Villain 3.3. Had it reinstalled from the market after flashing.

iGO just works - I don't know why Copilot wan't do ...

spunkey said:
Sry - if its not the right section for my question !! Please move if it is so.
Have flashed the new Villain 3.3 ROM thanks - i like it
But one Question - is it possible to get copilot working with it ? Walking through installation without problems. But when I start Copilot it says something like:
The system couldn't load Copilot-Code
What I'm doing wrong - or is Copilot not compatibel with Android 2.1 ? Please help
Click to expand...
Click to collapse
Strange, I get the same error!
I think you need version 8.0.0.606

Maybe you should uninstall it and reinstall it from the market instead of using titanium backup, 2.1 is a lot different than 1.5 and it may be that titaniumbackup can not restore the settings from an 1.5 rom to a 2.1 rom properly.
IMHO you should not restore your settings from 1.5 roms to 2.1 ones as many things have changed and you can easily break your system and then you will have to flash it again in order to get it working. I've had that experience, I restored 1.5 settings to 2.1 and all I got were force closes of sense and this and that. Selectively the restore works but I dont recommend it..

pina_ said:
copilot is not compatible with android 2.0
Click to expand...
Click to collapse
Don't know where you got that from, but my Copilot works perfectly with Villain 3.3 (Android 2.1).
Regards,
Dave

xTuX said:
Maybe you should uninstall it and reinstall it from the market instead of using titanium backup, 2.1 is a lot different than 1.5 and it may be that titaniumbackup can not restore the settings from an 1.5 rom to a 2.1 rom properly.
IMHO you should not restore your settings from 1.5 roms to 2.1 ones as many things have changed and you can easily break your system and then you will have to flash it again in order to get it working. I've had that experience, I restored 1.5 settings to 2.1 and all I got were force closes of sense and this and that. Selectively the restore works but I dont recommend it..
Click to expand...
Click to collapse
I used Titanium Backup for all the self-installed software and I had not one single FC (and as mentioned earlier, it also worked flawlessly with CoPilot). But I never restored any system settings from 1.5, I think that it what leads to your crashes.

sorted mine, updated to 8.0.0.507 and its working again!!!

alti4 said:
I used Titanium Backup for all the self-installed software and I had not one single FC (and as mentioned earlier, it also worked flawlessly with CoPilot). But I never restored any system settings from 1.5, I think that it what leads to your crashes.
Click to expand...
Click to collapse
yip, I know, as I said, it works if you select certain things that dont have much to do with the system itself. my problem was also that the apps didnt appear in the market so they dont update as easy - for me its best to do a clean setup, it takes some time but it almost always works safer and better

Facebook s disappeared

after installed froyo jp6 , no more facebook s in samsung app. where can i find it
thx in advance

Same problem here!! but i had done a backup of the .apk and installed it after updating to froyo.it opens but asks for login( account and sync) even thought my account is already signed to.

Hello
Seems that it is not yet available for Froyo.
There is a version to install, extracted from Eclair, but it desn't work for now.
So it will probably come officialy later.

I've tried to install it using the cab but didn't work, it's not supported to work on froyo

hopefully samsung release a froyo version soon, anything is better than the android facebook app

The default android app runs quite smoothly on Froyo after Vodoo lag fix.

Swype... anyone got it working?

So I have the swype beta installed on my a7 but it doesn't seem to work I can tap type but swyping just draws the line and nothing. I'm on 1.0c.
Sent from my GTablet-TnT-Lite using Tapatalk

yes...i got it working!
version 2.10.52.13753
i think it's beta

rogconnect said:
yes...i got it working!
version 2.10.52.13753
i think it's beta
Click to expand...
Click to collapse
did you have to do anything special? are you on the stock rom?
I have it installed but when I try to "swype" a word it doesn't do anything except draw the blue line. I'm either missing a crucial step or for whatever reason it's not installed correctly.

similar problem with graffiti
Hey,
I tried installing Graffiti and had trouble getting the A7 to recognize complete character strokes. A 'G' would come up as a 'C' and so forth. You can see the partial stroke in the graffiti entry area, but the complete stroke doesn't register.
Seems like the A7 has problem with all touchscreen features... not just "True" multi-touch.
Using Dexter's 1.0c

I using the stock rom with the elocity 12/24 update. I didn't use dexter mod for market.
I guess I was the first few who got the A7 when they started shipping. Swkye work fine for me, even with the drawing.

I can confirm 2.10.52.13753 works. I had 2.15 but it wasn't working, so after I read this thread I picked up 2.10.52.13753 and now I'm swyping away... this makes this device much much MUCH more viable for me. Thank you!

are you guys sideloading the apks or are you installing through the swype installer?

Sideloading. Google for that version #.

THANK YOU ALL! eLocity A7 now running Swype keyboard!
Using: elocity A7 w/ Dexter Mod
rogconnect & eskaryo, thank you so much
I just installed 2.10.52.13753 and it works! i tried using the newest version downloaded directly from swype and first it wouldnt recognize my A7 as an android device. I than used my tmobile g2 to download the install apk directly from swype and copied it over to the a7. It installed fined and looked like everything was about to work at first however every time i would try and type by swyping it would trace out the word but nothing would happen. no text was being placed into the text box. It did however type if i just tap the letters like on the default keyboard... i thought it to be strange.... Anyway i download the 2.10.52.13753 version and its PERFECT! Thank you again!
For anyone who is interested in version 10.52.13753 of swype i recomend reading this (figure it out...):
www(DOT)android-underground.org/2010/11/15/swype-2-10-52-13753-hvga-wvga/
i used the Swype 2.10.52.13753 WVGA.apk and works perfectly!
My Devices:
eLocity A7 tablet using Dexters Mod
Tmobile G2 / HTC DesireZ

MobiLeroy said:
Using: elocity A7 w/ Dexter Mod
rogconnect & eskaryo, thank you so much
I just installed 2.10.52.13753 and it works! i tried using the newest version downloaded directly from swype and first it wouldnt recognize my A7 as an android device. I than used my tmobile g2 to download the install apk directly from swype and copied it over to the a7. It installed fined and looked like everything was about to work at first however every time i would try and type by swyping it would trace out the word but nothing would happen. no text was being placed into the text box. It did however type if i just tap the letters like on the default keyboard... i thought it to be strange.... Anyway i download the 2.10.52.13753 version and its PERFECT! Thank you again!
For anyone who is interested in version 10.52.13753 of swype i recomend reading this (figure it out...):
www(DOT)android-underground.org/2010/11/15/swype-2-10-52-13753-hvga-wvga/
i used the Swype 2.10.52.13753 WVGA.apk and works perfectly!
My Devices:
eLocity A7 tablet using Dexters Mod
Tmobile G2 / HTC DesireZ
Click to expand...
Click to collapse
Thank you so much! I've had such a headache trying to get Swype to work for me! Lots of downloading, installing and uninstalling with various beta versions. This was what i needed to finally make it work. I wonder why Swype can't just post this as another option on their Android beta site? I'm sure that Elocity isn't the only device having this issue.

mskitty76 said:
Thank you so much! I've had such a headache trying to get Swype to work for me! Lots of downloading, installing and uninstalling with various beta versions. This was what i needed to finally make it work. I wonder why Swype can't just post this as another option on their Android beta site? I'm sure that Elocity isn't the only device having this issue.
Click to expand...
Click to collapse
You are correct, this is not the only Tablet that swype is not working on. I also picked up a Viewsonic Gtab 10" a few weeks ago and had similar issues getting swype to work on it. I ended up having to edit the build prop file for my device fior it to be recognized as a Samsung galaxy tablet inorder for swype to install. Again thanks to the help of the many developers and hackers in the xda community i managed to figure it out and get it working. Thank you to everyone who posts on here and replies to questions. Without the xda forum and its members i would never be able to figure this out.

Ya thanks to everyone who was involved,it got me up and running.

I downloaded and installed swype but when i load it and try to swype it tells me that the app is expired. Any suggestions?

2.29 beta no go
Just tried 2.10 and got the same expired message. I downloaded a new apk of 2.29 beta and it is not working on the A7.

[Q] Cant Update my app. in the new market 3.1.5 but can download new app.

Hi all
I have a weird problem here
I can not update "almost" any of my application on the new market 3.1.5
When I press on update it keep saying "Loading" without loading the page.
This happened with almost every application I have
The weird thing is that I can download and install new application !!!!!!!!!
I dont know what to do !??!!?!?!?!
Also I have notes that this market is slower than the older one, I dont know if this is normal
My Phone is Desire and I am on Cyanogenmod 7 Rom (Andriod 2.3.3)

Have you tried updating to the 3.1.6 market? I believe that has some bug fixes
Sent from my HTC Desire using XDA App

Will.....That is shocking
It seems that I have been away for centuries, coz this is the first time I heard that there are a new market version “3.1.6”
So could you pls tell me how to update to it ?!?!
As the last one I didn’t need to do anything actually, I only hit the market icon and it updates it self

Please use the Q&A Forum for questions Thanks
Moving to Q&A

I am also having the same problem's as you on my D3, DX and OD with different users and while using both wifi and 3g. The only permanent fix that I could come up with is freezing "market updater" with Titanium Backup and than uninstall updates for the market apps by doing this settings>applications>Manage applictions>Market>uninstall updates. It puts me back onto market ver. 2.3.6 (which works fine).

Yeah, the new market is slower than the old one. Reasong for this might be our phone's hardware. I recommend to go back to old 2.3.6 market. Works like a charm.

1Weather Install Problem

Just an FYI to any other 1Weather app 5X/6P users, since I'm a fan of the app. Here is a problem I found and a fix.
The app was fine on my Galaxy S4 (L) and my Nexus 9 (M) and both recognized the fact that I had installed and purchased it a few months ago. A new install just now on the 5X, of their latest 3.3.4 version, basically does not work well at all. I did an uninstall of it on the Nexus 9 and a reinstall there also didn't work right.
So, since it installed fine a while back, I found an old 3.2.1 version apk online and installed that. It works fine now, and I would think it still will whenever the OS gets around to updating it to that new 3.3.4 version. I suspect that since the 3.3.4 ver was running fine when it was applied on top of a prior running copy.
Here is the link to the old version.
[The 1Weather dev team got back to me and confirmed the problem. They are thinking it's changes in the M Pay system causing the problem. They confirmed my 'use an old ver' procedure is fine.]

The problem is supposedly fixed now with the 3.3.5 version, no need to worry about a clean install of the Play Store version.

I got it to install and run, but the 1x1 widget crashes. Unless they fix that I'm going to find another weather app.