Sry - if its not the right section for my question !! Please move if it is so.
Have flashed the new Villain 3.3 ROM thanks - i like it
But one Question - is it possible to get copilot working with it ? Walking through installation without problems. But when I start Copilot it says something like:
The system couldn't load Copilot-Code
What I'm doing wrong - or is Copilot not compatibel with Android 2.1 ? Please help
use Ndrive
I think - I will test another ROM. Thanks for ur advice !
copilot is not compatible with android 2.0
pina_ said:
copilot is not compatible with android 2.0
Click to expand...
Click to collapse
That's not the point as we're talking about 2.1. But anyway, I think you're wrong: my version of CoPilot works flawlessly on my HeroDroid-Rom (which is built on the same Eris leak as Villain).
So, maybe it's a specific problem with Villain, but definitely not with Android 2.1
Thanks for your answere - I will try to get it work - however ... btw which Copilot Version do you use ?
I'm using iGo, which runs great on 3.3 and is a better navigation system in my opinion.
spunkey said:
Thanks for your answere - I will try to get it work - however ... btw which Copilot Version do you use ?
Click to expand...
Click to collapse
CoPilot 8 from the Market (Full EU). Bought it under the old 1.5-Rom version, made a backup with Titanium Backup and restored it under Android 2.1.
It says on their site that they have Nexus support, so it should work in 2.1. You may have to update to the latest version though.
spunkey said:
What I'm doing wrong - or is Copilot not compatibel with Android 2.1 ? Please help
Click to expand...
Click to collapse
I have no problems with Copilot under Villain 3.3. Had it reinstalled from the market after flashing.
iGO just works - I don't know why Copilot wan't do ...
spunkey said:
Sry - if its not the right section for my question !! Please move if it is so.
Have flashed the new Villain 3.3 ROM thanks - i like it
But one Question - is it possible to get copilot working with it ? Walking through installation without problems. But when I start Copilot it says something like:
The system couldn't load Copilot-Code
What I'm doing wrong - or is Copilot not compatibel with Android 2.1 ? Please help
Click to expand...
Click to collapse
Strange, I get the same error!
I think you need version 8.0.0.606
Maybe you should uninstall it and reinstall it from the market instead of using titanium backup, 2.1 is a lot different than 1.5 and it may be that titaniumbackup can not restore the settings from an 1.5 rom to a 2.1 rom properly.
IMHO you should not restore your settings from 1.5 roms to 2.1 ones as many things have changed and you can easily break your system and then you will have to flash it again in order to get it working. I've had that experience, I restored 1.5 settings to 2.1 and all I got were force closes of sense and this and that. Selectively the restore works but I dont recommend it..
pina_ said:
copilot is not compatible with android 2.0
Click to expand...
Click to collapse
Don't know where you got that from, but my Copilot works perfectly with Villain 3.3 (Android 2.1).
Regards,
Dave
xTuX said:
Maybe you should uninstall it and reinstall it from the market instead of using titanium backup, 2.1 is a lot different than 1.5 and it may be that titaniumbackup can not restore the settings from an 1.5 rom to a 2.1 rom properly.
IMHO you should not restore your settings from 1.5 roms to 2.1 ones as many things have changed and you can easily break your system and then you will have to flash it again in order to get it working. I've had that experience, I restored 1.5 settings to 2.1 and all I got were force closes of sense and this and that. Selectively the restore works but I dont recommend it..
Click to expand...
Click to collapse
I used Titanium Backup for all the self-installed software and I had not one single FC (and as mentioned earlier, it also worked flawlessly with CoPilot). But I never restored any system settings from 1.5, I think that it what leads to your crashes.
sorted mine, updated to 8.0.0.507 and its working again!!!
alti4 said:
I used Titanium Backup for all the self-installed software and I had not one single FC (and as mentioned earlier, it also worked flawlessly with CoPilot). But I never restored any system settings from 1.5, I think that it what leads to your crashes.
Click to expand...
Click to collapse
yip, I know, as I said, it works if you select certain things that dont have much to do with the system itself. my problem was also that the apps didnt appear in the market so they dont update as easy - for me its best to do a clean setup, it takes some time but it almost always works safer and better
Related
helpp i try to load haret and i get a white flashing screen ... anyone have a fix?
you did not supply much information to help figure it out but go here nice little tutorial on how to get it working. Have Fun its pretty kool
http://forum.ppcgeeks.com/showthread.php?t=79798
Flashing White Screen
This is happening because you have the incorrect panel type in your default.txt... not sure which provider you have, but mine is Sprint and my panel type needs to be set to 3. It's gonna be 1, 2, or 3. Good Luck
ok i got it to LOAD but now im in the hero and htc loop
right now im trying the hero ui not using android at the moment
ok i got it to load... and i got android [the one g1 has] soo is there any way to change the resolution so that it fits?? because andoid doesnt seem to fit
im using the super hero build and it is flawless with the vogue. no more crashes for me and all is working. i cant believe we have hero on our vogues already
incubus26jc said:
im using the super hero build and it is flawless with the vogue. no more crashes for me and all is working. i cant believe we have hero on our vogues already
Click to expand...
Click to collapse
super hero build? does it run FULL speed? i want it lol where do i get it?
incubus26jc said:
im using the super hero build and it is flawless with the vogue. no more crashes for me and all is working. i cant believe we have hero on our vogues already
Click to expand...
Click to collapse
I do as well but for me the moment i boot into harat I get a minor blur the the whole thing i could never figure that out.
jdm4life said:
super hero build? does it run FULL speed? i want it lol where do i get it?
Click to expand...
Click to collapse
looks like you didnt read the post i gave you...... Atleast try lol
Super Hero can be found within this post
http://forum.ppcgeeks.com/showthread.php?t=79798
theoneownz said:
looks like you didnt read the post i gave you...... Atleast try lol
Super Hero can be found within this post
http://forum.ppcgeeks.com/showthread.php?t=79798
Click to expand...
Click to collapse
i dont see a super hero anything.. jus hero... can you send me a link to the one your using? like can u upload it somewhere?
what i did was download android 1.5, then downloaded super hero build and replaced files in android. then replaced again with the jackshero ski1.6. this method should give you all the files you need and also be the most stable. for me anyway. you will want to extract the resources.zip. it will make a media directory on the root of storage. then put everything else on the root of storage outside of media folder. then simply run heret.exe.
Projects Homepage
http://code.google.com/p/vogue-android/
Download Page (Looks like that change it a lot)
http://code.google.com/p/vogue-android/downloads/list
Super Hero Build
http://code.google.com/p/vogue-android/downloads/detail?name=SuperHero081609.zip
jtalemal Page of all uploaded Projects
http://code.google.com/u/jtalemal/updates
Hope this helps enjoy friends
Edit your default.txt
If you want a different LCD density, add an option lcd.density=xxx after the ppp options. 160 is default, 128 was the old "hiRes". Google Maps only works at 160.
If you don't want it to connect to data, add an option ppp.nostart=1.
I dont know if everyone has this issue or only myself....
My screen seems blurry, especially on linux boot, I attempted the lcd density adjusment as per above but can not seem to get it as clear as it used to be when massey started the project.
anyone have idea's? Am I possibly making a mistake? is everyone running into the same results?
all the sudden i keep going back to the htc logo screen and reloading everything all the time
incubus26jc said:
what i did was download android 1.5, then downloaded super hero build and replaced files in android. then replaced again with the jackshero ski1.6. this method should give you all the files you need and also be the most stable. for me anyway. you will want to extract the resources.zip. it will make a media directory on the root of storage. then put everything else on the root of storage outside of media folder. then simply run heret.exe.
Click to expand...
Click to collapse
i got it running but i get message not sent wen i send a text ... but it actually does send
that is a bug they are trying to work out
incubus26jc said:
that is a bug they are trying to work out
Click to expand...
Click to collapse
hey can u tell how to install that pointui on my xv6900 i installed the cab file and nothing happen im running NFSFAN wm6.5 v14
corypaul said:
hey can u tell how to install that pointui on my xv6900 i installed the cab file and nothing happen im running NFSFAN wm6.5 v14
Click to expand...
Click to collapse
you have to have the latest pointui installed. then enable it in today settings and then after it boots up disable it. then install the point sense suite cab. re enbable pointui in today settings. then switch themes in the pointui settings to point sense.
http://www.pointui.com/products/home-2 download point ui first and enable it in today settings let it boot up and then disable it
Do you install it to main memory? Seems like too huge for main?
ive been testing this new Xrom build for a few hours and it has hero theme with clock/weather widgets and runs very smoth and fast. i recommend trying it.
all you should need is the latest mission package zip (includes android 1.5)
http://code.google.com/p/vogue-andr...e=mssmisonpackage.zip&can=2&q=&sort=-uploaded
then replace the system sqsh with the one below
http://code.google.com/p/vogue-andr...system-xrom1.4r3.sqsh&can=2&q=&sort=-uploaded
make sure to put everything on the root of the storage card
then run haret exe
you can download as many free apps and widgets as you want from the marketplace app. Also you can add as many pages as you want to the UI.
incubus26jc said:
ive been testing this new Xrom build for a few hours and it has hero theme with clock/weather widgets and runs very smoth and fast. i recommend trying it.
all you should need is the latest mission package zip (includes android 1.5)
http://code.google.com/p/vogue-andr...e=mssmisonpackage.zip&can=2&q=&sort=-uploaded
then replace the system sqsh with the one below
http://code.google.com/p/vogue-andr...system-xrom1.4r3.sqsh&can=2&q=&sort=-uploaded
make sure to put everything on the root of the storage card
then run haret exe
you can download as many free apps and widgets as you want from the marketplace app. Also you can add as many pages as you want to the UI.
Click to expand...
Click to collapse
thanks im trying it out now.u dnt have to edit the default.txt. right?
edit: i tried it 1st i had to edit the default.txt. [already had one from a previous android and it worked fine]
but now its saying unable to mount data or something like that...
please help
EDIT 11-09-2010:
It is done! This one here dated 11th September 2010 is so far the fastest running Port I have made. Indeed it runs like hell on my Diamond. This one is RC2 and close to final. The Base has changed completely. RC1 used Incubus's SuperFroyo-ROM. Now, RC2 is using [email protected]'s SuperFroyo-ROM and has a great Superman-Styled-Theme.
What's working on my Diamond:
WiFi, Data, Bluetooth, Market, Sd-Card, this & that
Notice:
This build has disactivated compcache - but runs fast w/o it! To activate it you may use terminal. If you are kind enough then just play around with swapper2 and let me know what works best for you: Compcache or Swap?
Neopeek's SuperFroyo RC2 Port [CyanogenMod6]
I just installed an xandroid 2.2 rom or build(whatever they call these things) yesterday and ran the haret file to launch into it. If it's no more than unpacking this to your root of your card and clicking the haret file than I can give this a try.........thanks
very fast but wifi don't work.
any good news for the battery draining.................. on touch diamond............. is this android can handle the battery problem
bmvanc said:
very fast but wifi don't work.
Click to expand...
Click to collapse
wifi works for me
as usual..
camera working ?? or in development ??
BoneMo said:
camera working ?? or in development ??
Click to expand...
Click to collapse
as usual the answer: the camera ist sill far away...
Market works well
Dolphin browser HD downloaded, it works well..
Other apps download but their installation is unsuccessful ...
Like google sky map and wikidroid etc..
These worked before!!!!!!!!!!!!
Also sometimes signal is good but still EDGE does not work.But after restarts it works..
Also supsettings do not open ..there is force close error...
Pls help!!!!!!!!!!!!
SNaKeRUBIN said:
Market works well
Other apps download but their installation is unsuccessful ...
Click to expand...
Click to collapse
i can download and install app from market
yeah the battery problem is crucial to me , anyway i'll try this
I'm still experiencing problems loggin with my google account..
tried Supereclair superfroyo rc1 and rc2,chromatic,xdandroid 2.2 and i get always the same error
"Cannot estabilish a reliable connection to the server"
i'm using wi-fi because i have no data plan
dutch version is gone how can i get it back?
v1.1 has a dutch translation but this one not
How is the battery life in this one??
and will it work with PSfreedom??
Wich Radio can i use the best? i have 1.00.25.05 can i hold this one or should i download a newer radio?
wifi works if I just replaced androidinstall instead of reformated the ext2 partitation. Thanks.
I installed it like you said on your site, but its still booting with WM6... and ive made an fat32 partition an Ext2 Partition and a swap partition... i dont get it
can someone help me out with it ?
everything working fine for me
- wifi works
- gmail works
- market works
- superb speed (i also enabled compcache and JIT!!)
- Also tried it with the latest psfreedom diamond patched file and it works seamlessly (in the first go itself)
The battery and camera are still the issues but i think a kernel update will be reqd for these to get fixed n then we can use this build for everyday use!! Thanks a lot vatoloco!!
Cheers
Dude this is not a must its more like a ask
1 could u maybe add some pics to this post
2 could you make a exe which can extract all the stuff instead people have todo themself ?
it seems to me nothing more or less responsive than your other rc's.
but quadrant just gave me about 150 to 210 points where i got at least 480 with your latest chrome build.
why???
i can't use SupSetup !!!!!!!
Scoot CyanogenMod 7.1.0 RLS3
This is a build I have compiled from the official CyanogenMod source files and adapted for Kaiser/Vogue. Feel free to give it a go at your own risk!
Well, it still isn't quite as snappy as Froyo and the camera still doesn't work properly but it's probably about as fast as Gingerbread will get on our devices. I'm bound to have messed a few things up but i'll continue to work on it when I get time
All the usual things are working as far as i know, GPS works fine for me but the camera is as always not fully functional.
All of this is thanks to the guys working on the CyanogenMod roms and of course, none of this would work without all the hard work on the kernel so big thanks to dzo, vilord, l1q1d etc...
-------------------------------------------------------------------------------------
RLS 1:
Initial Release
Includes most of the Google Apps including Maps, Gmail etc..
Latest Market is included
RLS2:
Built from the latest 7.0.2 source
Optimised EGL for our devices
Updated Market
LDPI and PNG optimisations to save space & increase speed
ADW Launcher updated
Loads of tweaks and status bar changes
Updated RIL lib
Loads of fixes and optimisations
**I recommend leaving the phone for 5 minutes after installing to sort itself out and cache apps etc...**
RLS3:
I can't really be bothered to list all of the changes, there are quite a few but I just compile the thing, the changes are in the CyanogenMod repository. I have included the updated RIL and all of the Google Apps are up to date. The camera is still ****e but that's a driver issue. This release hasn't been heavily tested as I don't use my Kaiser as a main phone anymore So i'm sure you will find issues in which case we can sort them out as and when. Enjoy!
LINKS:
RLS1:
English: http://www.mediafire.com/?6708ud8kc9l9ex5
All Languages: http://www.mediafire.com/?amhd996w81xfldp
RLS2:
English: http://www.mediafire.com/?yhsc6jyl47wgpkv
All Languages: http://www.mediafire.com/?v3hhbh5tufoedfp
RLS3:
English: http://www.mediafire.com/?76vn9k0cx3debzd
All Languages: Coming soon!
Google Apps
28.04.11 : http://www.mediafire.com/?4yc9ubn2m513k3q
07.08.11 : http://www.mediafire.com/?c86rpae5kopdicc
I think that's it for now, have fun
OOOOOyyyyéééééé OOOOoyyyyyéééé !!!!
download'n !!!
thinx scooter & all android developers for our old kaiser
'll try your build this night & report any bugs...
keep working i realy apreciate your work sccooouut
xcuse my stupide bad english
cordialement esolks.
scooter1556 said:
Scoot CyanogenMod 7 alpha RLS1
This is a build i have compiled from the official CyanogenMod source files and adapted for Kaiser/Vogue. Feel free to give it a go at your own risk!
This is an alpha and still needs a fair bit of work to get it running to it's full potential but you can get an idea of what it will be like. Feel free to report any bugs that you find, by this i mean application crashes and things that don't work or look correct. I already know the system can hang and it isn't as fast a froyo
I have had to make a LOT of modifications for this to work, some of which may affect battery life but i haven't tested it for long enough to know so let me know how it goes. I'm bound to have messed a few things up but i'll continue to work on it when i get time
All the usual things are working as far as i know, i have not tested GPS fully and the camera is as always not fully functional.
All of this is thanks to the guys working on the CyanogenMod roms and of course, none of this would work without all the hard work on the kernel so big thanks to dzo, l1q1d etc...
-------------------------------------------------------------------------------------
RLS 1:
Initial Release
Includes most of the Google Apps including Maps, Gmail etc..
Latest Market is included
LINKS:
RLS1 :
English : http://www.mediafire.com/?6708ud8kc9l9ex5
All Languages : Coming soon hopefully.....
I will try and get some screen shots posted for those that like pretty pictures
I think that's it for now, have fun
Click to expand...
Click to collapse
This might be a stupid question but I need to ask anyway...is CM 7 based on gingerbread?
-Arturo- said:
This might be a stupid question but I need to ask anyway...is CM 7 based on gingerbread?
Click to expand...
Click to collapse
It is indeed
scooter1556 said:
It is indeed
Click to expand...
Click to collapse
Excellent, thanks Scooter.
downloading now keep up the good work man
woot...gonna give it shot ... hoping for not getting same data/wifi reboots
woow, million thanks to you scooter
finally a gingerbread based build for our kaiser
btw, which kernel do you suggest for this build?
thanks in advance
Hmm for some reason I cannot boot to android the phone has been stuck in boot loop for the last 15 minutes. I have an app.img file with about 80 applications so this might be a problem I'll try to boot it without the app.img. Both data and system on sd card imgs + latest '25 kernel.
Edit.
Ok I have removed the apps.img and it still doesn't boot.
I have noticed that there have only been modules for '32 kernel included in the build. Should it work with '25 kernel with proper modules added?
I'll wait for All Languages version to test it with the new kernel.
1. this was my first attempt to instal android on nand.. noob here ;P
downloaded kernel VOGUIMG-320-FROYO-01-16-11.NBH, then changed with editor to kaiser and painel 2. Install occured ok.... but phone isn't working.. "no service".
2. I do i see my batery status? can only see that bar on the top but don't no accurate bat status in %.
3. after this install can i install another another version overwrithing this one? for example now the phone isn't working so i want to change to another version of android can i simply put another "androidinstal.tar" in andboot folder and install?
Thanks and sorry for this noob questions...
chinomoreno said:
1. this was my first attempt to instal android on nand.. noob here ;P
downloaded kernel VOGUIMG-320-FROYO-01-16-11.NBH, then changed with editor to kaiser and painel 2. Install occured ok.... but phone isn't working.. "no service".
2. I do i see my batery status? can only see that bar on the top but don't no accurate bat status in %.
3. after this install can i install another another version overwrithing this one? for example now the phone isn't working so i want to change to another version of android can i simply put another "androidinstal.tar" in andboot folder and install?
Thanks and sorry for this noob questions...
Click to expand...
Click to collapse
YES! you can
To view Battery percentage, you need to set that in Cyanogenmod Settings (correct me if I'm wrong here since its been ages when I used CM build)
Yes, you can do that it's actually very simple. Just remember to edit your .nbh before every install if you are changing versions (donut, froyo, eclair).
Cheers. Welcome to Android world
-Arturo- said:
Hmm for some reason I cannot boot to android the phone has been stuck in boot loop for the last 15 minutes. I have an app.img file with about 80 applications so this might be a problem I'll try to boot it without the app.img. Both data and system on sd card imgs + latest '25 kernel.
Edit.
Ok I have removed the apps.img and it still doesn't boot.
Click to expand...
Click to collapse
Try a .32 kernel, also i have only tested it on NAND so it may be an issue with Haret. To be honest we're lucky it works with the .32 kernel so i expect problems with the .25 kernel. Sorry
scooter1556 said:
Try a .32 kernel, also i have only tested it on NAND so it may be an issue with Haret. To be honest we're lucky it works with the .32 kernel so i expect problems with the .25 kernel. Sorry
Click to expand...
Click to collapse
Yes I have noticed that there have only been '32 modules included in the build.
I think I'm going to skip the '32 kernel as It was acting up on me in the past. I'll try nand install in the evening hopefully it will work. Thanks Scooter.
-Rif- said:
woow, million thanks to you scooter
finally a gingerbread based build for our kaiser
btw, which kernel do you suggest for this build?
thanks in advance
Click to expand...
Click to collapse
I recommend using the latest .32 kernel you can find, either one that L1q1d has compiled or one from Clemsyn's thread You can find the latest kernel here: http://androidhtc.git.sourceforge.n...7c0bf5edc4f5c6d64ce4df29254e8332ce26b;hb=HEAD
Well have installed 6.1 and phone now works... =)
Will wait until a new version of this one to come out and then try again...
- Already found how to show percentage in bar status thanks dark_prince.
- Thanks for advice slimas, to edit .nbh do i need to reinstall kernel? and can i reinstall without mess up with previous android install or do i need to install again android?
- Some bugs that occurred to me .. sometimes bar on the bottom disappear can't access apps... ; some freezing sometimes, do you guys recommend to overlock? if so how to do it? Weather widget can't find info too lol not a serious prob...
I'm reading forum and these are some questions i couldn't find answer, for now i think that's all.. i'm enjoying android on kaiser think this is the time i will change forever...
thanks for fast feedback any good tips are welcome ;P
chinomoreno said:
- Some bugs that occurred to me .. sometimes bar on the bottom disappear can't access apps... ; some freezing sometimes, do you guys recommend to overlock? if so how to do it? Weather widget can't find info too lol not a serious prob...
Click to expand...
Click to collapse
The bar at the bottom of the scrren can disappear if you swipe down on the screen, it is a bit random but is a flaw in ADW launcher. To get it back you need to press the 'menu' button and go to 'settings' then go to 'ADW Settings, UI Settings and untick 'Dockbar'. Re-select 'Dockbar' and exit settings and it should be back I expect some freezing, it is still under heavy development and our devices are quite limited hardware wise so there won't be any miracles yet I overclock my Kaiser to 500Hz using ATools, a lot of people don't recommend it but it is what i have always done and i have never had any problems, it speeds the phone up a fair amount. Just tick the option when editing your NBH. The phone obviously needs to be connected to data or wifi for weather widget to get location information, i just tried it with wifi and it worked ok, there may be an issue with data though, i'll look into it Thanks for testing.
CAMERA
camera is not working properly but it looks awesome i will try to apply the update from previous cm to see if this will work
camera
after applying the update android can`t start so i am going reinstall it
Hi,
having installed InsertCoin ROM 1.1.4 on my HTC Desire, evrything works fine so far, except that the market on my Phone will now show fewer apps than before. When browsing the market from my PC, the missing apps will be displayed as being not compatible to my phone - while they have been before changing from the original ROM (which was FroYo...)
Examples are "Kinderanästhesie-Rechner" or "HandyTicket Deutschland" on the Market (sorry, as a new user I'm not permitted to post outside links)
Any ideasto fix this behaviour?
Try to clear data and cache from market in application settings.
TouchPaled from Oxygen with Transparent XDA App
Thanks for the hint, but that didn't do the trick. The apps are shown as incompatible in the web market after logging into my gmail-account and won't show up in a market search from the Desire's market.
sometimes SOME apps really dont show...
timothio said:
sometimes SOME apps really dont show...
Click to expand...
Click to collapse
So you, mean it isn't because of the ROM? If I'm right...
you could also try "market enabler"
mybe when you switch to an alternative provider you can download
other thing could be that the "desire" is not supported, had this a few times -.-
you could try search the app in an alternative market, or download from the dev...
hope i could help
Thank you all for your replies, but the problem is, before changing ROMs, these apps were not shown as being incompatible. I'm not a pro, but I guess it somehow moght come down to the ROM.... same issue on my wife's phone, though, same model and same ROM.
maybe you can solve the problem if you change the build.prop
there is the build number, in some cases the market wont let you download if you dont have the right
but the current roms have mostly the "3.14.405.1 CL96875 release-keys" and thats the official gingerbread build number from htc
but if you change it to a froyo one maybe it gets better
the thing is i dont know if you can edit it on an flashed rom, if its posssible just in fastboot/recovery mode with adb
or if you edith it before flashing the rom
best wishes und ein fröhliches O'Zapft is!
I cannot install any apps on my phone
Thanks for that very descriptive post on the problems you're having. Should make it easy for others to help you figure it right out.......
HipKat said:
Thanks for that very descriptive post on the problems you're having. Should make it easy for others to help you figure it right out.......
Click to expand...
Click to collapse
Yea man, you aren't going to get any help without giving us more details.... What kind of apks? Where are they from? What do you mean you "can't install them"? Does it give you an error? Are you rooted? What rom? What kernal?
I had this issue a while back, go into Titanium Backup and fix permissions.
It's worth a shot.
market wont load
I installed destroyer rom on my HTC evo 4g, I have android version 2.3.3, kernel version 2.6.37.3-cyanogemmod-0123-g53c6890 [email protected] #1, (whatever that means), CPU info ARMv&7 processor rev2 (v7l), MOd vers cyanogenmod-7.0.0-rc2-supersonic-kang, build # GR140. I hope all this info helps, wasnt sure what you guys would need to help fix problem but here is whats going on.
when i click on the market icon , it acts like it wants to load but doesnt, if i clear data, it then asks to create google account,..I have a google account, but when i click okay to create google account it doesnt do anything..
not sure if this is related but also tried to install flash player and it would install..
I am really new to this, and probably shouldnt have attempted to root my phone and install other than stock stuff...but everything else works and its definetly really fast, and cool...
any suggestions
Also; i installed the new market apk. 3.3.111 , i think?,..same thing = says "must add an account to the device to continue. do you want to continue...i click yes,,and NOTHING
Please Help!!!!!
For one thing, Destoyer was based on Android 2.1 I'm pretty sure, so that COULD be an issue. I mean, it's a pretty old ROM.
Hey man, I say flash a new rom, try some of these listed below
e3d shooter port (has 4g and sense 3.0)
Synergy (4g and sense 2.1 also extremely stable) - my daily driver
FEARmede (no 4g, runs sense 3.5) - Jared and dropzero work hard on this and things are getting fixed everyday.
if you like aosp try
cyanogen mod (4g very stable, have to install gapps to get market)
miui (no 4g, very clean ui, iphone replica almost is your an iphone fan)
savage mod 1.4 (4g, stable, the rom i run when using aosp)
I am running cm7.1 I cannot install any non market apps unknown sources are checked but I cannot get apostle to install. I get to the install screen try to push the button and it dose nothing. I have the stock kernal. Also since o Jane upgraded to 7.1 my video chat dose not work I use oovoo because this is the only app that work on Canada to US.
Have you seen this post?
http://forum.xda-developers.com/showthread.php?p=20441849#post20441849
Not sure if it will help, but it certainly did the trick for me.