Related
WARNING!!!
These applications are not legal in all countries/states. Check first before you use this software as you could get into serious trouble in some countries/states. (Wikipedia Reference)
Note: these programs requires .NET Compact Framework 3.5 Redistributable to work. Please install this first if it is not already on your device.
Also if you've just blown in here to download ACR and run, its in Post #3
ACR HD
This program was written for the Touch HD. If your device is not 480 pixels wide or WM6.5+ then I would not recommend you waste your time with this program. This version is for testing/comments only.
This version is for anyone who doesn't mind testing the application at the risk of their device. While I seriously doubt it would harm your device I still feel I need to ward off thoses that are under the impression this application was written with any sort of care or support.
Thiis program currently requires a contact with the FileAs name of Unknown to work properly/with Outlook Importer.
ACR – Auto Call Recorder
SETUP
Once installed go to your programs folder and you will see a new Icon for Auto Call Recorder. Click on the Icon and the options for Auto Call Recorder will be displayed. Once you have chosen your options click the Enable Recording button on the File Tab and close the Options Program. That’s it you are now automatically recording any calls your device has.
OPTIONS
There are two tabs of options to choose from. Most of these you will not need to use at all but where included to provide a better experience for some users who have different requirements such as limited memory, no use to record all calls and such.
File Tab
Folder to save calls in
From the top of the file tab, first we have a textbox showing where the files will be saved. On the right of this textbox is a button. This button when pressed will open a window so that you may change where ACR saves the files.
Ask to save Call
This checkbox when checked will make ACR prompt you with a choice to save the call once the call has finished. Note that even if you choose no you will still have the option to retrieve the last call up until you receive another call. The file Lastcall.wav is only overwritten when you receive another call.
Record Incoming Calls/Record Outgoing Calls
These checkboxes is pretty self explanatory, if you want ACR to record your incoming calls then check this box, if you don’t then uncheck this box. The same goes for Record Outgoing Calls.
Write to Debug File
Only use this option if you are having problems. At the moment the debug is very limited. When you have this option check ACR will write debug messages to a file ‘debug.txt’ in the installation folder.
Recording Tab
The recording tab contains the setting for the file to be recorded. First is the Wav format. This is either PCM or GSM6.10 PCM is a ‘raw’ wav format that will use about 1MB per minute. I have included this format for devices that do not support GSM6.10. The other format GSM6.10 is a ‘compressed’ Wav format and consumes approximately 30kB per minute. Obviously this is the preferred choice.
Bits per channel are either 8 or 16 bits. 16 bits is the preferred choice but I have also included 8 bits for slower devices.
Samples per Second are the number of samples taken each second. This is a matter of preference/device capability. The choices are 8000, 11025, 16000, 22050, 32000, 44100, 48000, 96000 and 192000Hz. If you have a slow device then you are better starting from the bottom and working your way up by testing to see which the best is for you. If you have a newer device then it is more a choice of how much space you want to use as the higher the number the more space the file will use. Also your device may not support the higher frequencies so I recommend starting with something like 48000Hz. If you set the frequency to high you will get gaps in your recordings.
DEVICES
This program will work on a number of devices at different degrees of success. Below is a few lists of devices and there reported success. If your device is not listed then try it anyway and don’t forget to report back you amount of success. If your device don’t match up to whats reported then please do
Devices known to work ‘Out of the box’ both ways
ASUS P835 (Stock ROM)
Touch HD (Stock ROM 6.1/WM6.5)
HTC Touch Diamond 2 (Stock ROM)
HTC FUZE (updated stock ROM)
HTC TYTN 2 (Stock ROM)
HTC Touch Pro 2 (Stock ROM)
Mio A702 - Not bad for 200Mhz
HTC Rhodium (Stock ROM)
HTC Touch 3G
HTC Trinity - P3600 (Stock ROM)
HTC Touch Cruise (Stock ROM)
HTC Prophet (WM 6.1)
HTC Herald - T-Mobile Wing (Stock ROM)
HTC Touch Elf (Stock ROM)
Samsung i780 (WM 6.1)
Samsung Omnia i900
Samsung Omnia 2
Plam Treo Pro (Stock ROM)
HTC Advantage 7501 (WM6)
HP iPAQ 614c
Devices that require registry setting to work both ways
HTC Touch Diamond – deep_purple reported that after installing GSM610 Codec he could use GSM6.10. Thanks mate.
HTC Touch Pro (EnergyROM / TIR 13R Lite ROM / RRE 6.5 Servies 6 v4)
HTC Blue Angel (Cooked ROM)
Devices that only work one way
Touch HD2
HTC XDA2
Xperia X1
Devices that don’t work
HTC Snap
HTC Vogue
HTC TyTN
HTC Gene
HP iPAQ 614c
TIPS AND FIXES
This is a condensed form of the previous thread and this thread. I will cover all the fixes found by the great folk at XDA.
Enable MicAGC. Its in Settings/System. Its not required by all devices though.
“I only hear my voice, the other party is very soft?” This is because you device is not setup to record both the incoming and outgoing voices. This can also be because your device is only ‘half-duplex’. To solve this try the suggestions in the Devices Post.
“ACR only records the first minute of the call?” This is because you have ‘fast sleep’ enabled on your device. Try something like Advanced Configuration Tool to disable fast sleep.
“I can’t see if it’s working?” ACR has no interface when it’s running. It was designed like this to keep memory usage to a minimum. If you are having troubles with this then I suggest you use the ‘Ask to save call’ option so you know it’s worked after the call. You can also see it running in a task manager program when you choose to show ‘view processes’.
DISCLAIMER / LICENSE / EULA
Please read carefully the terms and conditions of this End User License Agreement ("EULA") before installing ACR software ("Software"). This EULA provides a license agreement between authors of ACR ("Licensors") and you (person) ("Licensee") to use the Software and contains warranty information and liability disclaimers. By installing and using the Software you accept and agree to the terms of this EULA. If you do not agree with these terms and conditions, you must cancel the installation or, if the Software is already installed on your device, promptly uninstall it.
OWNERSHIP
The Licensee acknowledges and agrees that the Software is a product of the Licensors. It is protected under international copyright law. All copyrights are exclusively owned by Slothie.
LICENSE GRANT
The Software is freeware. However, the Licensee may use it only and exclusively for testing in either private personal or commercial usage, and only under conditions which do not contradict the restrictions noted below. If you want to use Software for anything else, you must contact the Licensors. Software may not be bundled or distributed with any other package without written permission of the Licensors.
NO WARRANTIES
The Software is distributed "as is" WITHOUT WARRANTY OF ANY KIND. The Licensee uses the Software at his own risk. The Licensors shall not be liable to the Licensee for any kind of consequences, which occur or not occur while installing, using or uninstalling the Software.
RESTRICTIONS
In accepting the EULA granted by Licensor, Licensee agrees that he shall not
1. Sublicense, sell, lease, rent, permit use of, give, or lend the Software
or any copy or portion thereof;
2. Decompile, disassemble, reverse engineer, analyse, or otherwise attempt to
discover the source code of the Software;
3. Use or incorporate the Software or any portion thereof in any other product
without the prior written permission of the Licensor;
4. Remove, alter, or obscure the copyright, trademark, proprietary, or other
notices from the Software or any of its components.
Licensee is allowed to edit existing or create new language layouts, and share them with other users. Licensee is allowed to edit existing or create new graphic elements, but only with respect to copyright and trademark notices.
DISTRIBUTION
The Licensee may NOT redistribute the Software by any mean (CD, DVD, Web site...) without permission from Licensors.
TERMINATION
The Licensee may terminate the EULA at any time. Also, the EULA will terminate automatically if Licensee fails to comply with the restrictions described above. Upon termination of the EULA, the Licensee shall remove all copies of the Software from his (her, its) device and all storage media.
Credits and Thanks
mskip for providing his registry settings from the 2 way recording Cab. Without these settings most devices would only be recording one side of the conversation so if you feel like buying him a beer you can here.
A big thanks to Rozenthal for letting me steal his legal stuff from FingerKeyboard.
A big thanks to Biker1 for helping all the lost people in this thread. You should get more credit than me.
Also thanks to [germany]merlot and deep_purple for testing.
Menneisyys for this great thread here.
Also all the people that reported device Successes/Failures/Tweaks/Registry Setting.
CHANGE LOG
Version 1.2.4
Extended Beta period.
Version 1.2.3
Fixed 12/24 hour time issue if the filename.
Version 1.2.2
Changed the file save format to include the date/time.
Version 1.2.1
Added Choose Folder Dialog.
Added code to stop Windows from shutting down the application in the background.
Added option to record Incoming Calls.
Added option to record Outgoing Calls.
Added Debug to File option.
Removed Readme Tab.
.
OUTLOOK IMPORTER
Outlook Importer is for both ACR and ACR HD. It will import all your saved calls into Microsoft Outlook on your PC. Calls are imported into the Journal.
This version is for anyone who doesn't mind testing the application at the risk of their device. While I seriously doubt it would harm your device I still feel I need to ward off thoses that are under the impression this application was written with any sort or care or support.
Oh yeah currently this app does not import call from the last day. I will hopefully expand on this to be an option but currently its the last 24 hours.
thanks a lot for the update dude
but where is the changelog ? What is new in this version
Great Work!
Waiting for changelog!
Hmmm what did I change?
I added a 'choose folder' for everyone that couldn't put a \ on the end of the path. I added a cancel statement to form closing so CE wouldn't close the app silently in the background. I added a couple of options to choose what calls are recorded. I added a crappy debug file function. I removed the readme tab. Oh and I added an option to save the call after its finished. I changed the file save to include the date. I still don't know why I did this? Hmm what else, don't know I've got the flu so I'm not really that switch on at the moment. Mostly I concentrated on the bugs from version 1.1. If your happy with version 1.1 I wouldn't bother changing if I was you.
oki doki !!
thanks dude
Thanks Slothie, very nice job
still, Record Outgoing Calls it's not working for me
it's unchecked all the time
eac said:
Thanks Slothie, very nice job
still, Record Outgoing Calls it's not working for me
it's unchecked all the time
Click to expand...
Click to collapse
Ok you'll have to help me out here? What is the device you are using? Also what ROM. So if you check record outgoing calls it unchecks itself?
I downloaded v1.2 and the following issues occur:
1) Record outgoing calls box is ticked but then unticks itself. I finally got it to stay ticked but no outgoing calls being recorded.
2) unable to delete recorded calls. Message pop up says System File, Access Denied.
When I first downloaded v1.2, outgoing calls were being recorded than above issues started occurring.
Downloaded v1.2 due to the Record Call Yes/No option.
Will download v1.1 for now.
I have a Diamond (cdma)
-------------
Slothie said:
Ok I'll fix this just as soon as I shoot the people that tested this. In the mean time I would recommend trying to set this in the registry directly if you can't wait until tomorrow. The setting are in Local Machine\Software\Inta\ACR and the value should be set to 'True'. With a capital T.
Click to expand...
Click to collapse
What caliber do you need? j/k
I will try the registry change.
Do you know why I cannot delete recorded calls?
Thanks and welcome back.
Hope your daughter is ok.
Scratch that! I think I found the problem. I just uploaded a newer version. Cheap and nasty style as I'm sick as a dog.
Oh thanks Biker, she is fine now except we all now have the swine flu as the hospital was overrun with infected patients. Little price to pay though as she is now walking again!
Can't delete recorded calls? As in they are read only?
Slothie said:
Ok I'll fix this just as soon as I shoot the people that tested this. In the mean time I would recommend trying to set this in the registry directly if you can't wait until tomorrow. The setting are in Local Machine\Software\Inta\ACR and the value should be set to 'True'. With a capital T.
Click to expand...
Click to collapse
I have set the value to 'True', but I still doesn't work. I saw that version 1.1 was removed, could this be reupload?
Thanx.
It's obvious but just in case, the registry value change to "True" is done to "RecordOut."
Slothie said:
Scratch that! I think I found the problem. I just uploaded a newer version. Cheap and nasty style as I'm sick as a dog.
Oh thanks Biker, she is fine now except we all now have the swine flu as the hospital was overrun with infected patients. Little price to pay though as she is now walking again!
Can't delete recorded calls? As in they are read only?
Click to expand...
Click to collapse
As they say, if you wanna get sick, go to the hospital!
Good to hear about your daughter. She will now have to take care of you
I can play back recorded calls but I cannot delete them.
Says System File. No Access.
Thanks.
Btw, made the registry change but box still unticks itself.
UPDATE:
v1.2.1 is working fine
Corrected the Record Out and box stays ticked.
In regards to not being able to delete any recorded calls, the following occurs:
I go to delete and and it asks me if I want to delete the call? I then click Yes. I get the Pop Up Message that says System File, still want to delete? I click Yes. I then get a message saying Access Denied.
BUT
when I exit the call log screen and I go back to the call log screen, the recorded calls that I could not delete ARE deleted
Edit:
I went to delete recorded calls but this time when the Pop Up asked if I want to delete specified call, I clicked Yes (as I did before) and when the System File pop Up appeared I just exited the screen.
When I returned to the call log screen, the calls were deleted as before.
Sorry for any redundancy but I want to be as specific as I can to help solve the problem.
Thanks.
thanx 4 rthat piece of soft...
will test on my diamond touch 2 now ;-)
Tested! Works fine even with both the incomming/outgoing calls and the final confirm!
Only two things:
In portrait mode would be useful to have a scroll bar since I can't see all the options in main page!
Can you put an "OK" in the low bar instead of use "X" in upper right corner to exit???
Fake Call is a quick and easy app to "call yourself" on a Windows® phone. It helps you politely escape social situations with the push of a button. It provides an extremely realistic incoming call experience, and includes powerful scheduling features in a simple user interface.
Features
*
Schedule a Fake Call in advance, or generate one on demand.
*
Simple, touch-friendly user interface to quickly schedule a call using predefined intervals.
Select a caller from your phone's Contacts. The selected contacts photo and phone number appear when the phone rings.
*
Extremely realistic incoming call experience using your phone's default ringtone and profile settings.
Ability to play a voice clip after the fake call has been "answered" to simulate conversation at the other end (useful when you are in a very quiet room).
*
Fast, small and optimized for Windows® phones using native C++ code. Does its job and gets out of your way quickly.
*
Localized in English, French and Italian.
=================================================
I have downloaded this application
from
http : / /www . trinketsoftware. com / FakeCall /
remove the spaces
all are trial version...
Twikini
Thought
PowerSMS
No Calls
Scrub - it is only free
Some one please give the full version of the application
==================================
Try these applications once
debroy66 said:
all are trial version...
Some one please give the full version of the application
Click to expand...
Click to collapse
Since I know you've read the rules on this forum I also know that you're not asking for someone to share purchased software with you, in a warez kind of manner.
If that is the case, then you know you must buy the software if you want the full version, and you also know that no-one on xda devs will even consider helping you getting this software illegally.
So, in answer to your question, I suggest you check the website that you have linked in order to find out how to purchase the software.
Good luck
People are always in a hurry to get somewhere. A common issue is to inform someone waiting for us that we are, let’s say, a bit late and maybe reassure him that we will be there in some time. It would be great if we could send a message to that someone telling him our approximate location and an estimate time to reach the destination ( maybe along with some excuses )
Sorry I'M Late was developed to achieve this task. This application allows a user to get his aproximate location and then send it to someone else though an SMS. While the idea itself is not new, my objective was in the first instance to create a User Interface as easy and friendly i could, secondly I wanted to exploit CellID localization instead of GPS. The last thing i wanted to do was to provide a more human readable message to be sent: most of the application i've tested, use GPS positioning to get a precise localization but then they send Latitude and Longitude coordinates or Google Maps links and usually when i want to tell someone where i am, i use street names instead of coordinates
Uploaded with ImageShack.us
[17/07/2010] Today I've released the new version of Sorry I'M Late with some new additions and fixes (thanks for all your hints and suggestions). Following is the updated feature list, along with the changelog (for more technical stuff).
[18/07/2010] Released 1.5.1 version. I forgot to add compression to the network calls o) so this is basically just a patch release
Some features:
Doesn't require GPS antenna
Finger friendly UI thanks to SenseSDK from Steady Software
Call history access to guess the most probable recipients
Native SMS application used to send message to allow last minute changes
Currently localized in 12 different languages (English, Italian, Czech, Polish, German, French, Spanish, Portoguese, Russian, Dutch, Swedish and Japanese) *new v 1.5*
Support for custom messages via template *new v 1.5*
Reduced network bandwidth usage *new v 1.5.1*
Requirements:
.NET Compact Framework 3.5 required
data connection is used to retrieve street names so be aware of this before you start the application
Changelog:
1.5.1
- added compression support on network calls to reduce bandwidth usage
1.5
- added internationalization resources (12 languages support)
- improved position approximation, now integrated with landmarks from Wikipedia
- moved localization algorithms to a remote server to reduce network calls and CPU load
- added icons
- new option menu
- added option to append a link pointing to the location on Google Maps
- added option to create a template message to be used instead of default one
- fixed single line help on main screen (at least i hope so )
1.0
- first public release
Notes:
Currently the remote server is located on a free host. Usually it's fast an reliable but network problems can occour
In order to display the new application icon on the Start Menu, a soft reset may be required
As you may have noticed, there is a new "Twitter" option available but it's disabled. I'm thinking whether include it or not in a future release.
Last but not least, thanks to:
- Jack_Surfer (for polish translation)
- claus1953 (for spanish translation)
- dr.cryo (for czech translation)
- mike2nl (for dutch translation)
- Cunione (for french translation)
- Mad Marc (for german translation)
- Celso Marques (for portoguese translation)
- PlackSlayer (for japanese translation)
- scanie (for swedish translation)
- serfer222 (for russian translation)
- the0ne (for video review on YouTube)
- Cunione (for icons)
- billyJ (for icons)
- bernabap (for icons)
- tunnuz (for icons)
Lol, I saw the tittle and thought this was an (AI) app that generates intelligent excuses given some contextual information
Anyway, great app.
Installed, but can't find icon. I also installed to SD card? Thanks
EDIT: ok I'm running it from the sorryimlate.exe file in file browser. Works, don't understand the contact selection just yet. It seems like from call history. Pretty neat so far. Thanks.
noellenchris said:
Installed, but can't find icon. I also installed to SD card? Thanks
Click to expand...
Click to collapse
Sorry for the missing shortcut, my mistake . I've updated the cab so now it creates the proper start menu shortcut.
noellenchris said:
EDIT: ok I'm running it from the sorryimlate.exe file in file browser. Works, don't understand the contact selection just yet. It seems like from call history. Pretty neat so far. Thanks.
Click to expand...
Click to collapse
You're right! Actually the contact list is populated with numbers fetched from the call history. it is a very simple algorithm that group the caller IDs and count them, then the list is ordered from the most called to the less. the idea is that if you need to send someone a message to say you're late, it is very likely that it is a person you call or receive calls from. you're still able to pick a contact from the address book however, selecting the first option and then searching for it just before sending the actual SMS.
As ai said, for now it is a very simple algorithm, maybe in the next release i'll try to refine it a bit, for example considering also the date of the calls.
Cool little app ;-)
It would bee even better if it was possible to choose more then one contact from the list.
And there is missing a dot at the end of the message.
Thanks for the suggestion i think that this will definitely come with the next release.
Maybe set an own default message? So I can set in my own language.
first of all.. this is a wonderful idea.. and i'm glad to see the sense interface once again.. but for some reason whenever i run the application it disconnects me from the network and starts looking up a signal. after it finds one and i click "find it", it disconnects me from the network once more...
when i try choosing from the contact list the app crashes..
hmm
jan-willem3 said:
Maybe set an own default message? So I can set in my own language.
Click to expand...
Click to collapse
yes, you can expect that on the next release
oh and by the way, for now there are only English and Italian as available languages, but if someone have a little time to translate the strings in other lenguages i will surely appreciate that.
nir36 said:
first of all.. this is a wonderful idea.. and i'm glad to see the sense interface once again.. but for some reason whenever i run the application it disconnects me from the network and starts looking up a signal. after it finds one and i click "find it", it disconnects me from the network once more...
when i try choosing from the contact list the app crashes..
hmm
Click to expand...
Click to collapse
the fact it disconnect is actually a desired behavior. When the application boots up it forces a network deregistration and then reconnects in the hope to associate with another GSM tower and thus have two distinct point used to approximate the position instead of just one.
speaking about the crash, can you tell me please the exact steps you perform before the problem shows ?
Really great app, works flawlessly on my TouchPro. Thanks !!
I would really like to see this on WP7 as well
how to do translation in txt file?
i've attached to the first post a txt file containing some xml tags. you just need to translate the strings inside <Value></Value> tags.
Thanks a lot
It sounds very interesting, because a all the time stop and go traffic here in our country, this app can help out .. possible.
Polish translation
Hi,
here is my Polish translation of the strings.txt for this interresting app
View attachment strings.txt
Attached spanish translation text.
Thanks to claus1953 and Jack_Surfer for translations, i will include them in the next release (due to next week, so stay tuned )
Czech translation
Hi Stefano.
Very useful app! Thanks for it.
I'm sending Czech translation. Please send me message in case of further releases and new strings for translating.
Regards
Pavel
And here the 1st ducth translation. Possible some changings to do, because i have made the translation before i have used the app.
Ciao Ste !
Nice app and very useful !
Here my french translation.
I had a few bugs :
- In the help, the description box, is only on 1 line. Not multi-lines like you show it in the screenshot.
- Is it possible to add a "." after the location ? (at the end of the sentence)
Ex. : "Hi! I'm around xda forum. I'll be there in 15 minutes.
- Can you add the localisation name (the city name) after the address ?
- Where is located the language file ? Is it possible to make a function that will check a language folder insted of including it in a .cab file ? (should be easier for all translaters)
I tell you back that's a nice app.
Bravo, bel lavoro. Quand'è che fai la version 1.5 ???
thx
hey!thx a lot! it is a great idear!
what wouldbe great: a map link in the sms, so the receiver have only to click on the link zo see my position on Google maps.
possibility to send a email
thx one more time, its great!
HUAWEI P6-U06
BAIDU ROM SUPPORT
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PS: P6 does not support the card swipe package only supports wire brush package, please read the wire brush tutorial in second post.
Current ROM Recommended:
An automatic call recording, reliving memories dialogue
The long-awaited automatic call recording, and we finally met, the call setup settings. In the call log can directly see and hear the recording. Revisit your conversations with friends, important messages can be recorded!
(Supported models: C8812, C8812E, C8825D, U8825D, C8950D, C8813, C8813D, C8813Q, N880E, N909, Coolpad5890, A820, G4, ZP980, G520, A798T, A789; does not support: G11, T328D, T328W, T328T, ONE X (4.2), ONE X (4.0), i9300, I9220, NS, I9250, N7100, P6)
1 , on-demand customization, want to record on the record
2 , the perfect support call recording, and the sound quality is very clear
3 , support for automatic recording only the specified number
4 , recordings and call logs automatically associated, at a glance
5. Second, traffic compression improvements, consumption is no longer afraid
Demand has long been compressed for a single application flow switch has been presented, you can set the slide switch, a single consumption data Clearly Visible
6. Regularly check traffic compression is turned on, and the pop-up status bar, cancel prompt. Traffic compression turned off after status bar option, promptly closed the traffic compression will not occur again this prompt, the purpose is to ensure that users can use at least one traffic compression to stop prompt.
7. Third, enhanced reporting harassment to report so easy!
Harassment Report feature further enhanced reporting and more convenient. Call records and SMS reports added to the list entry, click to reports, the reported number is automatically added to the blacklist.
8. Fourth, the recorder revision, experience a new interactive and visual
Line body style interface, simple and tough. While recording, such as a cassette-like circular frame while continuing to rotate. Easy to operate Easy
Other improvements :
[Desktop]
Add Status Bar New 3 switches: shutdown, mute, lock screen
Added a new desktop gadget and quick launch tool flashlight switch
List of new features backplane switch options
New application list sorted by frequency increase and optimize the flow of new folders
Add docbbar background desktop settings can be configured
[Calls]
New answer vibration function - Answering the call to set an additional vibration on / turn off
Repair contacts call log loading process text overlay (Contributors: @ Communications _diao wire)
Fix C network outgoing calls, the other is answered no vibration
Repair deleted contacts custom ring tones, this contact calls without ringing
[Audio]
Update the system database and the default ringtone ringtone (personalized ring tones, oh. Brush does double clear when the alarm clock rings or ROM36 new default ringtone)
Updated Unlock Sound
Update Key audio
Update Switch Sound
Add a stopwatch and countdown sound
Add List "Delete notes" Operation Add sound effects
[SMS]
New messages list, press and hold the message sent by strangers, the pop-up menu to add the "Add to Contacts", to facilitate rapid strangers to Contacts
[Setup]
Add reboot into Recovery , click reboot, choose " Brush Mode " Press OK to take effect
Fix: Set Application Management checkbox easy to inadvertently
[Multimedia]
Added support for the launcher to add the song list for the Shortcut . shortcut displays the name of the song list and cover art. Click on the shortcut you can play back the songs in this list.
Add in the network disk transfer list open files, can be directly downloaded to the local file already. If the file format is not supported, then the pop-up toast inform
New network disk files can view the details
New network disk provided in accordance with the " name " , " Time "&" Size "three ways to sort view
Add music player settings to add a "sliding when changing song lyrics progress," the switch is disabled by default. Off can be dragged up ways to view the lyrics, the song does not affect the playback progress.
Added: Optimization song delivery network traffic
[Other]
Add gadgets to add process optimization, performance tuning slide
New gadgets quick start
Fix List " delete notes " operation to add sound effects
Fix Baidu map click on the navigation problem will flash back
Fix anti-harassment module interface is displayed as Chinese in English, and the system main interface uncoordinated issues (Contributors: Fish swim in the Atlantic Ocean)
Fix harassment after intercepting messages by clicking Report an error exit (provider: ccll1935 )
Repair system upgrade interface " boot across process upgrade notification " in front of the word appears truncated
Fix screenshot after editing the picture to be wrong (Contributors: @ mmsky521 )
Repair Baidu Cloud Professional Edition installed static reading of the world can not read (Contributors: @ qwer6x )
Fix Baidu map navigation functions when using flash back. (Provider: love Liu rising, brush the old man)
V38
Dual 11 re-launch one: Camera for face glance , there are male **** wire spring
Camera from the original partition mode to full-screen viewfinder, greater clarity to make your photos extraordinary. The 4.0 and 4.1 of the camera on the device is the "below the screen, does the viewfinder." Of course, this is not without cost, and interested friends can read this post cloud appendix.
Love taking pictures of the machine will be faithful exhibition limbs friends ~ pairs 11 , Singles, afraid! Embrace your pictures expertise, use Baidu cloud ROM camera modules to give you the goddess photographed it, maybe your spring is thus born!
1, flash and front camera button placed in full-screen preview of the upper left corner, to facilitate related adjustments before taking pictures. Simplifies the camera and video mode switching method, and you can set the photographic effect.
2, camera side UI and photographed consistent.
3, panorama mode UI to maintain consistent and photographed.
Dual 11 re-launch two: Gallery transfiguration superhuman powers, save Mito, Mito look
Gallery also with camera module together with the revision, comprehensive adaptation 4.0 , 4.1 , 4.2 version. Meng goddess could not be saved according to how their own masterpiece keep it constantly browsing!
1, the time axis visit: daily photo thumbnails will form a unit, down from the time of the shooting early evening sorted. If you want to jump to a certain date, in addition to scroll up and down this way, you can also click on the date of the text, it will pop up a half-screen interface for quick retrieval jump.
2, the traditional folder view View: camera in a prominent position at the same time, taking into account the visibility of other folders. Users can not show in the first folder interface organized into a single virtual folder "more images" in the.
3, cloud photo album browsing, you can in this tab page choose to use Baidu account login, browse Baidu photo album, quickly and safely.
With a call + SMS + address book interface, you can slide freely in three modes - switching back and forth, operate freely. This revision would not say that contrary to its kind, drawing almost the extraction, but also iron clank, the Jiao-Jiao Yong.
Dual 11 re-launch three: a master lock screen diversity, was supernatural theme fresh
Previously said, Baidu cloud ROM can fit the theme package on the market mainstream, especially with a grain company named works. But slightly less than that, we were not recognize and parse them in the lock screen theme package configuration file, so even if you apply these topics can not see the lock screen which contains.
From this ROM , we can already parse lock screen file and allows you to enjoy these lock screen way up. You download and apply a theme package, which contains the lock screen mode immediately.
Dual 11 re-launch four: watch video manipulation, networked disk Zuoyoufengyuan
From ROM38 onwards, after you log Baidu account, you can operate Baidu network disk stored on the video. You can upload videos to the local network disk, network disk can also download the video to the local. Even more peculiar is that we integrate baidu cloud media player SDK , so you can directly open network disk video viewing and no longer around the corner downloaded, Xiaoyun think this is the second ROM the biggest bright spot, very convenient, this the true meaning of life is the cloud era: the body in the cloud, Rulvpingdi.
From the interface point of view, the whole video is now divided into two tab pages. The first page or the traditional local video page, it will list all of your local video files will not repeat them here. The second page is the cloud video interface, we'll show your network disk in which all the video resources. You can choose to download the press can also click directly play.
You choose to upload or download, you can view the progress in the status bar. You can also click the notification to cancel the operation.
To save your traffic, you can adjust the settings: Sync, upload, and download only the WLAN circumstances.
Recommended: Launcher lose weight first screen Speed-
Many cloud Friends complain first screen performance is not good, in this ROM , we do some optimization. The main means that some of the non-essential work on the launch later choose, rather than a whole thing will come ready. By means of this optimization, we can speed up your boot into the first screen speed. Of course, we will continue to work in the operating performance, time will tell.
Other improvements:
[Calls]
Add call to join the automatic redial function
Fix U8825D enter the call recording, telephone recording settings click Back, phone crash
[SMS]
New SMS center number is set entrance ( only supports mobile )
[Setup]
New dual card ringtone settings. Dual cards side by side, ringtones entirely different.
[Multimedia]
Optimization drip long sentence recognition results page interactive detail:
1, the recognition results in increased system scrollbar. When the text can not be too much when the screen is displayed, the scroll bar appears by default, blinks and then disappears.
2, the bottom right corner of the character statistics. Instant recognition results show the current number of characters.
Fix click Edit / Rotate picture, gallery will FC
Click to download repair assistant dictionaries, appeared FC
[Other]
Repair the battery can only be charged to 99% , not full (providing user: 839 907 118 )
Fix Battery Life time display is incorrect
Fix C8813Q just brush machine, giving a new number to send the text message, click the dial key from the SMS interface, character overlap
Download V39: Link
Download V38: Link
Download V37 : Link
Note : I Am Not Responsible For Any Damage Or Brick Or Broken SD Card. I am not developer i am just sharing it.credit goes to original developers. Try At Your Own Risk.
Huawei P6 Baidu cloud ROM Brush tutorial
Tips:
1 , there is no experience of Friends of the machine brush machine, please download "Baidu cloud a key Brush tool" brush machine, safe and secure!
2 , phone system or non Baidu cloud systems (factory system, MIUI , or other), only supports wire brush.
3 , the phone system has been Baidu cloud systems, you can choose wire brush (will double clear) or card swipe.
--------------------------------------------- P6 wire brush tutorial - ------------------------------------------
Note: This tutorial is for P6 Mobile brush into Baidu cloud ROM , regardless of the current phone system version is already Baidu cloud systems.
Again: the use of this tutorial wire brush method clears the user data, please backup your data!
Brush preparation:
1, P6 driver installed on the PC and use the phone via a USB cable to connect PC.
Driver Download:
http://pan.baidu.com/share/link?shareid=3886485607&uk=2602288789
2, open the USB debugging:
a) Open Developer Options: Set - "on the phone -" mad Version Details
b) Open the USB Debugging: Settings - "Developer Options -" tick USB debugging
3, close the pea pods and other software, so as not to affect the brush.
Brush process:
1, unpack the downloaded Brush, the following documents:
2, double click to run FlashTool_For_P6.BAT, press any key to start the brush machine, brush script will automatically clear the data (please back up your current phone data!), The whole process takes about five minutes or so, please be patient:
Brush success tips:
If the following screen appears, check the phone USB link is OK, including the driver checks, pea pod is closed:
Second Reserve
hi, is this rom multilanguage?
Trying in a moment... Hope it has better perfomance and other languages than China...
From what i read, "baidu" is Chinese company modeled similar to Google and that these Baidu roms they release are optimized for those Baidu services. So I was expecting this rom to have all their Baidu content in it.
Okay, just flashed, everything went fine, lets see how it runs...
BluntP6 said:
Okay, just flashed, everything went fine, lets see how it runs...
Click to expand...
Click to collapse
Ok,waiting your feedback and impressions
is it multilanguage?
raiden2332 said:
is it multilanguage?
Click to expand...
Click to collapse
Only English and Chinese avaible.,
---------- Post added at 08:03 PM ---------- Previous post was at 07:52 PM ----------
Okay... The rom itself runs pretty smooth in home screens and settings. But one big problem is Google apps. They arent included, and when i try to flash newest 4.2.2 jb gapps zip, i cant use phone because it gives google services crashed error popup. When i flash 4.3 gapps zip, it doesnt crash but google play says "no connection". Im trying to find a solution on this, tell me if you know something...
Okay, tested it for a hour. I didnt manage to get gapps working, so this rom is useless for me. From Antutu i got 13700. As i said before, UI worked smoothly, but the phone has still some elements in Chinese, even when i switched system language to English. There was Chinese, Englih and Spanish. With google apps and little perfomance boost (>15000 score) and fully english UI this would be best rom for P6 atm.
BluntP6 said:
Only English and Chinese avaible.,
---------- Post added at 08:03 PM ---------- Previous post was at 07:52 PM ----------
Okay... The rom itself runs pretty smooth in home screens and settings. But one big problem is Google apps. They arent included, and when i try to flash newest 4.2.2 jb gapps zip, i cant use phone because it gives google services crashed error popup. When i flash 4.3 gapps zip, it doesnt crash but google play says "no connection". Im trying to find a solution on this, tell me if you know something...
Click to expand...
Click to collapse
Try to installer ancient versions of google apps for then updates.
neodante said:
Try to installer ancient versions of google apps for then updates.
Click to expand...
Click to collapse
Tried it many times, no working.
BluntP6 said:
Tried it many times, no working.
Click to expand...
Click to collapse
Ok,so no have solution
Wow, I have just installed this ROM and have played around with it for a while and I must say it is as interesting as hell !!
Very fast and unlike any UI I have experienced. I have not tried to install a gapps .zip as it seems not to work so I tried to install a Google Play Store .apk but for some reason it wont open, maybe some kind of restrictions. All other .apk's install and work fine. I synced my Gmail acct. all good, sycned my contacts (using .vcf file) and all good.
Lots of Chinese stuff I dont understand but I'm having fun just trying everything.
Overall for someone like me who uses my mobile for texting, calling and basic fun stuff this is a really good ROM with some serious eye candy.
If you want to try something really different give this a go.
Cheers, LL13- :victory:
lamplighter13 said:
Wow, I have just installed this ROM and have played around with it for a while and I must say it is as interesting as hell !!
Very fast and unlike any UI I have experienced. I have not tried to install a gapps .zip as it seems not to work so I tried to install a Google Play Store .apk but for some reason it wont open, maybe some kind of restrictions. All other .apk's install and work fine. I synced my Gmail acct. all good, sycned my contacts (using .vcf file) and all good.
Lots of Chinese stuff I dont understand but I'm having fun just trying everything.
Overall for someone like me who uses my mobile for texting, calling and basic fun stuff this is a really good ROM with some serious eye candy.
If you want to try something really different give this a go.
Cheers, LL13- :victory:
Click to expand...
Click to collapse
I had the same problem with Google Play APK. Closing right after opening.
A Developer Edition of Baidu Rom: http://bbs.anzhi.com/thread-8514214-1-1.html
V38 Updated See OP For Changelog
Actually I Don't Have Device Right Now My Device Is In Repair.
Can Someone Test This Gapps And Reply If Its Working Or Not?
http://d-h.st/orl
you might have a multilingual version?
I can't install it. The installer says <waiting for device>, phone just shows the "Huawei Ascend" slpash and nothing happens. Can anyone help me? I really want to check this rom out.
_________________________________________________________________________
Managed to install it. The rom is really cool. UI is smooth and beautiful. Too bad google services don't work and it is not fully translated.
I have installed the tweaked version but my xiaomi mi band doesn't recive notofication from wtsapp or messangee (i have set it inthe option)
I have lg g2 with cloudy rom thk
Help
@hackarchive do u now why?
Mi Band still with active fatal bugs.
[Reviews] Mi Band still with active fatal bugs. My clients make complains
#1
41| 01:17, Jan-20-2015 | Promote| |Go to reply no.
Mi Band still with active fatal bugs. My clients in EU make complains agains me becouse of that. They want to return goods.
Please help me. I sell every day new device. After week client return becouse of bugs. Please fix this bugs.
Report 1
Date 01.06.2015
Bug description: When I choose image from my gallery to add profile image orientation of picture in xiaomi mi band is wrong. Check my profile image to see orientation and fix bug.
Report 2
Date 01.06.2015
When send message feedback it is appear modal message for confirmation? Language is korean, it is not english.I set to english option,but still have korean text after press feedback. I do not understand. Please fix this bug too.
Report 33
Date 07.01.2015
Alarm software is not good. It is very poor. I miss my tomorrow appointments because you. Thank you for that.
Alarm vibration cannot wake me up, because missing option for vibration activity interval length. It have only max count 3 alarms. This totally wrong. It must be 10 or 20 for example.
Report 4
Activities not work at all on Galaxy S4 Android 4.3
Everything work good but activities not work at all.
Missing running activities.
Favorite1
Rate
Reply Edit
forum1
Senior Member
Rank: 2
Credits67Online time5 Hours
#2
Author| 01:19, Jan-20-2015 |
Missing public API for external integration for example according Google fitness.
Did you give the app privileges to allow notifications in your phones security settings?
Settings -> security -> notification access -> BleNotificationService make sure that box is checked
forum11111 said:
[Reviews] Mi Band still with active fatal bugs. My clients make complains
#1
41| 01:17, Jan-20-2015 | Promote| |Go to reply no.
Mi Band still with active fatal bugs. My clients in EU make complains agains me becouse of that. They want to return goods.
Please help me. I sell every day new device. After week client return becouse of bugs. Please fix this bugs.
Report 1
Date 01.06.2015
Bug description: When I choose image from my gallery to add profile image orientation of picture in xiaomi mi band is wrong. Check my profile image to see orientation and fix bug.
Report 2
Date 01.06.2015
When send message feedback it is appear modal message for confirmation? Language is korean, it is not english.I set to english option,but still have korean text after press feedback. I do not understand. Please fix this bug too.
Report 33
Date 07.01.2015
Alarm software is not good. It is very poor. I miss my tomorrow appointments because you. Thank you for that.
Alarm vibration cannot wake me up, because missing option for vibration activity interval length. It have only max count 3 alarms. This totally wrong. It must be 10 or 20 for example.
Report 4
Activities not work at all on Galaxy S4 Android 4.3
Everything work good but activities not work at all.
Missing running activities.
Favorite1
Rate
Reply Edit
forum1
Senior Member
Rank: 2
Credits67Online time5 Hours
#2
Author| 01:19, Jan-20-2015 |
Missing public API for external integration for example according Google fitness.
Click to expand...
Click to collapse
Hello sir,
I just received the Mi Band. I looked at your reports, and I have experienced the following:
I also use the Samsung Galaxy S4. But you need to run at least Android 4.4 to have the Mi Band working properly. Why do you have such an old version of Android? Also..., android Lollipop (5.0.X) is almost coming for the Galaxy S4.
You should also use the tweaked version. This one is English and also has got wayyy more options for notifications. You can customize the notifications per app. Wonderfull!
About the reports:
Report 1: I can upload a picture, and it doesn't rotate. It's OKAY in the Tweaked Mi Band app!
Report 2: Feedback is in English for me! Use the tweaked app! (Link to the correct thread below).
Report 3: Yes, the Alarm function could be more sophisticated. I suggest you to use this alarm for waking up without an annoying sound. Use Timely as a backup. Why would you rely on just one vibrating alarm? Not really smart huh...?
Report 4: Activities working just fine now. In the latest release, there is also a running activity! (including GPS from you phone, you can even track your run!)
Here is the link to the thread where you can download the Tweaked Mi Band app. This one is really good! Just update you android firmware, install this tweaked app, and you're good to go!
Link: http://en.miui.com/thread-53761-1-1.html
Good luck!
versions
what is diference between this two version?
TW version
MiFit_1.2.922_351_en.apk (10.11 MB, Downloads: 205)
Notification version
MiFit_1.2.922_351_en_notify.apk (10.13 MB, Downloads: 475)
---------- Post added at 07:19 PM ---------- Previous post was at 06:28 PM ----------
I register my account with my old phone number.
Now I use new phone number on the same phone. How to change my number on my MiBand account?
Or switch to email logon option?
On my Andorid 5 after install this version try to update ROM but failed with messages that rom is not update my MiBand.
Run tracing direction not have googe or bing card only simple geo data cordinate and direction line.
Please add map images - google or bing.
KNOX Security alert on Galaxy S4 unrooted I9505 LTA, version for Bulgaria Android 4.3 is lattes.
This if very fatal bug according KNOX Security alert that MiBand try to access some security data.
By the way SDK log files are empty.
Latest bug is fatal because it is happing every time.
After that device cannot connect.
One hour hard operation,restarts and more device work.
Here is image of exception message.
After press button boom
can anyone add minute repeater function to this tweak?
after touching, the miband will vibrate like minute repeater function, to notify us what time it's
https://en.wikipedia.org/wiki/Re ... %29#Minute_repeater
thanks for reading!!