DInc and SetCPU - Droid Incredible Q&A, Help & Troubleshooting

Does the DInc not like SetCPU? I think it may be causing and endless boot loop with Skyraider Sense ROM.
Sent from my PC36100 using XDA App

My DInc doesn't have a problem with it. But I haven't run it with Skyraider yet. SetCPU also warns about potential bootloops if you have it autostart.

PonsAsinorem said:
My DInc doesn't have a problem with it. But I haven't run it with Skyraider yet. SetCPU also warns about potential bootloops if you have it autostart.
Click to expand...
Click to collapse
That might be it, the autostart. There are a lot of things DInc seems to do differently that I've never encountered on my EVO.

I never had problems with SetCPU before on my Incredible. What kernel are you using, what V# of SetCPU are you using, what Skyraider are you using, what radio are you using?

tdavis42 said:
I never had problems with SetCPU before on my Incredible. What kernel are you using, what V# of SetCPU are you using, what Skyraider are you using, what radio are you using?
Click to expand...
Click to collapse
I rooted and then installed Skyraider over a Stock OTA 2.2 Update, so...whatever that is/was.

Can't help if you don't answer all the questions. Sorry.

Related

Quick questionabout Setcpu

just flashed back to my nandroid of Fresh. But when I go to setcpu the only options I have is Performance and Conservative. Do anyone know how I can get the other options of Setcpu back...ondemand etc. It was working fine prior to me making the nandroid.
I also uninstalled and reinstalled setcpu and still the other options aren't there.
Anybody?
Sent from my PC36100 using XDA App
plmiller0905 said:
Anybody?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
sorry nobody has got back with you on this.. i hate when that happens but it does.. sometimes we just get lucky and sometimes its just because nobody comes across our questions.. well my friend your in luck...
the setcpu governor settings vary depending on which kernal you are using.. some even say that setcpu is not needed.. i personally was having al kinds of issues with setcpu. i just recently switched to juice defender.. havent been using it long enough to tell a diffence yet.. but im hoping my battery life increases..
hope this helps.
Just reflash your kernel of choice. Had the something happen to me after installing a Fresh updated ROM. Once I reflashed the kernel, the options were back.
Sent from my PC36100 using XDA App
yep - the different governors have to be individually built into the kernel, so devs choose which ones to include and only build in the ones they want.
More info on setcpu here;
www.pokedev.com/setcpu
Sent from my blah blah blah blah

Set cpu with stock kernel droid incredible

I just rooted my incredible and I'm using the kernel that came with it stock. I disabled perflock and I left the max speed to 998 and the min speed to 245.
When I'm not doing anything on my incredible, I see that the speed constantly changes from the max to the min. Not even one second passes before it just goes back and forth, back and forth. Is this normal?
Coming from the d1 where it would stay at the min when idle, I'm not sure if what's going on with my incredible is normal.
Sent from my ADR6300 using XDA App
Yes that's normal. For better battery life, I'd try a kernel with smartass governor. It spends more time on the lower frequencies.
Sent from my ADR6300 using Tapatalk
Switching to a different kernel will give you the ability to overlook//underfoot the system needed.. this in turn increases battery life.. kingklick, ziggy's, chad's kernel are all well known kernels.. you will want to play with different kernels.. not every kernel will be stable to overlook to certain speeds on certain Rom's.. switching kernels is almost as addictive as switching roms.. always nandroid before flashing anything..
Sent from my ADR6300 using XDA App
Typos on my end.. underfoot = undervolt.. overlook = overlook.
Sent from my ADR6300 using XDA App
Will those kernels work on my rooted stock incredible?
Sent from my ADR6300 using XDA App
Yea! By stock i'm assuming all you did was root. I am currently running SkyRaider 3.5 Sense along with
"2.6.32.26-ubcredujuerbek-12082010 [email protected] #11"
I will edit with links to these two items.
SkyRaider 3.5 Sense - SkyRaider
Chad's Kernel - Incredikernel
My phone runs amazingly fast with sense but yet, even with heavy usage (Texting constantly, on the internet, gmail, even Fring) I can go an easy 24 hours on one charge. If my phone stays screen-off idle I could last at 95%-100% for several hours.
Yes, all I did was root.
Does the chad kernel provide wireless tether and will i still need to disable perflock in setcpu?
Sent from my ADR6300 using XDA App
the non stock kernels all disable perflock already, you do not need to do it..
flash the kernel via clockwork, and you are set.. jump into setcpu and adjust some settings and add profiles.. you'll be golden..
What he said ^^
Sent from my ADR6300 using XDA App
20twins10 said:
the non stock kernels all disable perflock already, you do not need to do it..
flash the kernel via clockwork, and you are set.. jump into setcpu and adjust some settings and add profiles.. you'll be golden..
Click to expand...
Click to collapse
Not quite. I believe Lou's has some tweaks within perflock, so disabling it would lose those.
And most kernel devs, particularly Lou and the ones who use HAVS, advise against using SetCPU. I'd check with your chosen kernel thread for details.
Sent from my ADR6300 using Tapatalk
Also, I wouldn't 'set on boot', at least till you find frequencies that your phone can handle safely. Otherwise, you'll get a 'crash' loop, where your phone starts up just fine, but once you go past the initial lockscreen it'll crash and reboot. Very annoying...
Sent from my Incredible using XDA App
what rager said... ive put on kernels and ran em high only to get a "boot loop".. its tuff to get out of cause you need to get back into setcpu to scale back otherwise it keep on going.... i learned to put the setcpu app icon on my main screen so i can get there fast to scale back..
http://forum.xda-developers.com/showthread.php?t=866736 can you install these with the stock rom. i wanted to experiment to get better battery life but didnt really want to install a different one.
keith4321 said:
http://forum.xda-developers.com/showthread.php?t=866736 can you install these with the stock rom. i wanted to experiment to get better battery life but didnt really want to install a different one.
Click to expand...
Click to collapse
Some. Make sure it's a sense version if you're using stock sense.
Sent from my ADR6300 using Tapatalk
Mr. Rager said:
Also, I wouldn't 'set on boot', at least till you find frequencies that your phone can handle safely. Otherwise, you'll get a 'crash' loop, where your phone starts up just fine, but once you go past the initial lockscreen it'll crash and reboot. Very annoying...
Sent from my Incredible using XDA App
Click to expand...
Click to collapse
That exact thing happened to me...pissed me off like crazy at first I was clueless then I just did a restore
Sent from my ADR6300 using XDA App
Yeah, if you let it boot loop too long it'll hard boot, which is where the phone cuts off completely. That has happened to me, and it ruins apps.
Sent from my Incredible using XDA App

[Help] Myn's RLS5 Kernal

I just tried flashing a few different kernals but the Netarchy and Ziggy's caused lagginess and lines running vertically across my screen, and the Stock HTC #15 wont let 4G enabled (I live in a 4G area) So I want to make use of it ... any suggestions?
The lines may go away if you just lock and unlock the screen. This happens to me every time. Try ziggys kernel.
Sent from my PC36100 using XDA App
Thanks. Only problem is my Evo has also been acting funny, turning on and off randomly... the lagginess persisted with Ziggy but I at least was getting clear 4G.. so I'm kinda stuck between 4g or normal performance at the moment
You using setcpu?
Sent from my PC36100 using XDA App
Strange. I never had any problems with Net's kernels. Which one did you try? I am running Myn's RL5 (between betas) and have excellent 4G, speed (no lag), and good battery life. Try the one in my signature if you haven't yet. Also try the universal, No UV, NO HAVS, CFS version. My Evo has never liked being undervolted and that may be the problem you are having.
netarchy is so slow for me, unbearable. To the point where I had to flash back to ziggy.
Sent from my PC36100 using XDA App
I just discovered half my screen lags when I use ziggy...must get stock back then :/
Sent from my PC36100 using XDA App
I am using netarchy-toastmod-4.2.1-cfs-bfq-havs-more-smartass-universal-signed on my Myn's RLS5 and I dont have any troubles. Give it a try, if not it could be something besides the kernel
My phone can't handle more havs for some reason. It freezes and reboots. Only two kernels work for me right now without putting lines through my screen.
Sent from my PC36100 using XDA App

Overclock Help

Other than SetCPU apk, Is there another apk that will allow me to overclock on my evo????
There are a couple in the market. Overclock widget is one of them
We're comin from a pure power source.
I personally like SetCPU the best
Sent from my PC36100 using XDA Premium App
You are probably aware of this but I'll throw it out just in case... You also have to be running a kernel that allows overclocking.
jesuspgt said:
You are probably aware of this but I'll throw it out just in case... You also have to be running a kernel that allows overclocking.
Click to expand...
Click to collapse
Yea, I think this is my problem, it won't go past 998400mhz. It says you can disable Perflock, but that doesn't do anything.
So is there no way to overclock with 2.6.35.10 htc kernel?

[Q] Reboots on Nils Business Gingersense 3.5

Hello all, I am new to the world of rooting and roming with my Incredible. I have tried a couple of ROMs, and have decided that I really like Nil's Business Gingersense 3.5. I installed this ROM following the instructions shown on Nils thread, and I really love the Sense 3.5 experience.
One problem I have been having is that periodically, when exiting an app, rather than going to the home screen it will show an HTC screen, and then loading for a few seconds before showing the homescreen. By reading Nil's official thread, I see that someone else had the same problem, and it was suggested that he may be using a task killer that is killing the process. I am not using any task killers, and am having the same problems.
Has anyone else run into this issue, and been able to correct it?
Thanks,
Brennan
I'm on nils 2.0 right now and I'm not getting that problem... Try reinstalling the Rom and if that doesn't work try freeing up some memory in the task killer ... In notifications > quick settings and scroll down till u see "Total memory" and press kill all
Sent from my ADR6300 using xda premium
I've been having the same issues with my nils 3.5. It seems to happen mostly when i'm backing out of the stock browser. No task killers for me either.
Sent from my ADR6300 using xda premium
snow580 said:
I've been having the same issues with my nils 3.5. It seems to happen mostly when i'm backing out of the stock browser. No task killers for me either.
Sent from my ADR6300 using xda premium
Click to expand...
Click to collapse
Same problem here. I installed over my stock 2.2 ROM (I reset factory setting and formatted /system). I just did the "clean" wipe on installing the stock 2.3 ROM and then installed the Business Gingersense. I've only been up and running for an hour so I haven't had too much time to test it to see if it helped.
I've tried a number of things, and am still getting the reboots. I uninstalled some apps that run in the background that I don't use much (Google+) and that seems to have helped, but I still have the reboots periodically. I haven't had a chance to wipe, but I am doubtful that will help since I followed Nils instructions to install stock GB and then his rom.
Brennan
I was getting it too mostly after using the stock browser and handcent. I flashed his latest update and its happening less, I also have only had the lockscreen freeze once on his latest as well.
I have had the same issue, but can't seem to find a rhyme or reason for it. I have tried to track the various scenario's with no luck. I just flashed to the latest of tiny's Kernel and Nil's 2.2 for 3.5. Hopefully that will help.
I had a couple of spontaneous reboots with earlier versions of Nil's 3.5, but when I flashed v2.1 I went through the longer process of flashing the stock OTA first per his installation instructions and it actually seems to have helped! It's been stable and relatively snappy. I installed EXT4ALL and am using the smartass v2 governor with SetCPU.
Look up V6 Supercharger, In the Nil's Gingersence 3.5 development thread. Supercharger worked for me. Haven't had the reloading Problem for a week now.
Sent from my ADR6300 using Tapatalk
That's the only solution available for now. The V6 Supercharger Script. You have to bulletproof the launcher with the V6 script
Sent From My Optimized HTC Incredibly Dinc
I installed and ran the V6 supercharger script and no more launcher reboots!
Thanks for the suggestion!
Sent from my ADR6300 using xda premium
snow580 said:
I installed and ran the V6 supercharger script and no more launcher reboots! EVER!
Thanks for the suggestion!
Sent from my ADR6300 using xda premium
Click to expand...
Click to collapse
fixed that for you lol
Hahahah!! Thanks for all your work bro!
Sent from my ADR6300 using xda premium

Categories

Resources